xref: /linux/drivers/scsi/libfc/fc_fcp.c (revision d39d0ed196aa1685bb24771e92f78633c66ac9cb)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21 
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31 
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 
38 #include <scsi/fc/fc_fc2.h>
39 
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42 
43 #include "fc_libfc.h"
44 
45 struct kmem_cache *scsi_pkt_cachep;
46 
47 /* SRB state definitions */
48 #define FC_SRB_FREE		0		/* cmd is free */
49 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
50 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
51 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
52 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
53 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
54 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
56 
57 #define FC_SRB_READ		(1 << 1)
58 #define FC_SRB_WRITE		(1 << 0)
59 
60 /*
61  * The SCp.ptr should be tested and set under the host lock. NULL indicates
62  * that the command has been retruned to the scsi layer.
63  */
64 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
65 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
66 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
67 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
68 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
69 
70 /**
71  * struct fc_fcp_internal - FCP layer internal data
72  * @scsi_pkt_pool: Memory pool to draw FCP packets from
73  * @scsi_queue_lock: Protects the scsi_pkt_queue
74  * @scsi_pkt_queue: Current FCP packets
75  * @last_can_queue_ramp_down_time: ramp down time
76  * @last_can_queue_ramp_up_time: ramp up time
77  * @max_can_queue: max can_queue size
78  */
79 struct fc_fcp_internal {
80 	mempool_t		*scsi_pkt_pool;
81 	spinlock_t		scsi_queue_lock;
82 	struct list_head	scsi_pkt_queue;
83 	unsigned long		last_can_queue_ramp_down_time;
84 	unsigned long		last_can_queue_ramp_up_time;
85 	int			max_can_queue;
86 };
87 
88 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
89 
90 /*
91  * function prototypes
92  * FC scsi I/O related functions
93  */
94 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
95 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
96 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
97 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
98 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
99 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
100 static void fc_fcp_recovery(struct fc_fcp_pkt *);
101 static void fc_fcp_timeout(unsigned long);
102 static void fc_fcp_rec(struct fc_fcp_pkt *);
103 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
104 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
105 static void fc_io_compl(struct fc_fcp_pkt *);
106 
107 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
108 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
109 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
110 
111 /*
112  * command status codes
113  */
114 #define FC_COMPLETE		0
115 #define FC_CMD_ABORTED		1
116 #define FC_CMD_RESET		2
117 #define FC_CMD_PLOGO		3
118 #define FC_SNS_RCV		4
119 #define FC_TRANS_ERR		5
120 #define FC_DATA_OVRRUN		6
121 #define FC_DATA_UNDRUN		7
122 #define FC_ERROR		8
123 #define FC_HRD_ERROR		9
124 #define FC_CMD_RECOVERY		10
125 
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_ER_TIMEOUT	(10 * HZ)
130 #define FC_SCSI_TM_TOV		(10 * HZ)
131 #define FC_SCSI_REC_TOV		(2 * HZ)
132 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
133 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
134 
135 #define FC_MAX_ERROR_CNT	5
136 #define FC_MAX_RECOV_RETRY	3
137 
138 #define FC_FCP_DFLT_QUEUE_DEPTH 32
139 
140 /**
141  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
142  * @lport: The local port that the FCP packet is for
143  * @gfp:   GFP flags for allocation
144  *
145  * Return value: fcp_pkt structure or null on allocation failure.
146  * Context:	 Can be called from process context, no lock is required.
147  */
148 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
149 {
150 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
151 	struct fc_fcp_pkt *fsp;
152 
153 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
154 	if (fsp) {
155 		memset(fsp, 0, sizeof(*fsp));
156 		fsp->lp = lport;
157 		atomic_set(&fsp->ref_cnt, 1);
158 		init_timer(&fsp->timer);
159 		INIT_LIST_HEAD(&fsp->list);
160 		spin_lock_init(&fsp->scsi_pkt_lock);
161 	}
162 	return fsp;
163 }
164 
165 /**
166  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
167  * @fsp: The FCP packet to be released
168  *
169  * Context: Can be called from process or interrupt context,
170  *	    no lock is required.
171  */
172 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
173 {
174 	if (atomic_dec_and_test(&fsp->ref_cnt)) {
175 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
176 
177 		mempool_free(fsp, si->scsi_pkt_pool);
178 	}
179 }
180 
181 /**
182  * fc_fcp_pkt_hold() - Hold a fcp_pkt
183  * @fsp: The FCP packet to be held
184  */
185 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
186 {
187 	atomic_inc(&fsp->ref_cnt);
188 }
189 
190 /**
191  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
192  * @seq: The sequence that the FCP packet is on (required by destructor API)
193  * @fsp: The FCP packet to be released
194  *
195  * This routine is called by a destructor callback in the exch_seq_send()
196  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
197  * argument even though it is not used by this routine.
198  *
199  * Context: No locking required.
200  */
201 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
202 {
203 	fc_fcp_pkt_release(fsp);
204 }
205 
206 /**
207  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
208  * @fsp: The FCP packet to be locked and incremented
209  *
210  * We should only return error if we return a command to SCSI-ml before
211  * getting a response. This can happen in cases where we send a abort, but
212  * do not wait for the response and the abort and command can be passing
213  * each other on the wire/network-layer.
214  *
215  * Note: this function locks the packet and gets a reference to allow
216  * callers to call the completion function while the lock is held and
217  * not have to worry about the packets refcount.
218  *
219  * TODO: Maybe we should just have callers grab/release the lock and
220  * have a function that they call to verify the fsp and grab a ref if
221  * needed.
222  */
223 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
224 {
225 	spin_lock_bh(&fsp->scsi_pkt_lock);
226 	if (fsp->state & FC_SRB_COMPL) {
227 		spin_unlock_bh(&fsp->scsi_pkt_lock);
228 		return -EPERM;
229 	}
230 
231 	fc_fcp_pkt_hold(fsp);
232 	return 0;
233 }
234 
235 /**
236  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
237  *			 reference count
238  * @fsp: The FCP packet to be unlocked and decremented
239  */
240 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
241 {
242 	spin_unlock_bh(&fsp->scsi_pkt_lock);
243 	fc_fcp_pkt_release(fsp);
244 }
245 
246 /**
247  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
248  * @fsp:   The FCP packet to start a timer for
249  * @delay: The timeout period for the timer
250  */
251 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
252 {
253 	if (!(fsp->state & FC_SRB_COMPL))
254 		mod_timer(&fsp->timer, jiffies + delay);
255 }
256 
257 /**
258  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
259  *			 fcp_pkt
260  * @fsp: The FCP packet to abort exchanges on
261  */
262 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
263 {
264 	if (!fsp->seq_ptr)
265 		return -EINVAL;
266 
267 	fsp->state |= FC_SRB_ABORT_PENDING;
268 	return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
269 }
270 
271 /**
272  * fc_fcp_retry_cmd() - Retry a fcp_pkt
273  * @fsp: The FCP packet to be retried
274  *
275  * Sets the status code to be FC_ERROR and then calls
276  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
277  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
278  * The SCSI-ml will retry the command.
279  */
280 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
281 {
282 	if (fsp->seq_ptr) {
283 		fsp->lp->tt.exch_done(fsp->seq_ptr);
284 		fsp->seq_ptr = NULL;
285 	}
286 
287 	fsp->state &= ~FC_SRB_ABORT_PENDING;
288 	fsp->io_status = 0;
289 	fsp->status_code = FC_ERROR;
290 	fc_fcp_complete_locked(fsp);
291 }
292 
293 /**
294  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
295  * @fsp: The FCP packet that will manage the DDP frames
296  * @xid: The XID that will be used for the DDP exchange
297  */
298 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
299 {
300 	struct fc_lport *lport;
301 
302 	lport = fsp->lp;
303 	if ((fsp->req_flags & FC_SRB_READ) &&
304 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
305 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
306 					scsi_sg_count(fsp->cmd)))
307 			fsp->xfer_ddp = xid;
308 	}
309 }
310 
311 /**
312  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
313  *		       DDP related resources for a fcp_pkt
314  * @fsp: The FCP packet that DDP had been used on
315  */
316 static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
317 {
318 	struct fc_lport *lport;
319 
320 	if (!fsp)
321 		return;
322 
323 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
324 		return;
325 
326 	lport = fsp->lp;
327 	if (lport->tt.ddp_done) {
328 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
329 		fsp->xfer_ddp = FC_XID_UNKNOWN;
330 	}
331 }
332 
333 /**
334  * fc_fcp_can_queue_ramp_up() - increases can_queue
335  * @lport: lport to ramp up can_queue
336  *
337  * Locking notes: Called with Scsi_Host lock held
338  */
339 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
340 {
341 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
342 	int can_queue;
343 
344 	if (si->last_can_queue_ramp_up_time &&
345 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
346 			 FC_CAN_QUEUE_PERIOD)))
347 		return;
348 
349 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
350 			FC_CAN_QUEUE_PERIOD))
351 		return;
352 
353 	si->last_can_queue_ramp_up_time = jiffies;
354 
355 	can_queue = lport->host->can_queue << 1;
356 	if (can_queue >= si->max_can_queue) {
357 		can_queue = si->max_can_queue;
358 		si->last_can_queue_ramp_down_time = 0;
359 	}
360 	lport->host->can_queue = can_queue;
361 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
362 		     "can_queue to %d.\n", can_queue);
363 }
364 
365 /**
366  * fc_fcp_can_queue_ramp_down() - reduces can_queue
367  * @lport: lport to reduce can_queue
368  *
369  * If we are getting memory allocation failures, then we may
370  * be trying to execute too many commands. We let the running
371  * commands complete or timeout, then try again with a reduced
372  * can_queue. Eventually we will hit the point where we run
373  * on all reserved structs.
374  *
375  * Locking notes: Called with Scsi_Host lock held
376  */
377 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
378 {
379 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
380 	int can_queue;
381 
382 	if (si->last_can_queue_ramp_down_time &&
383 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
384 			 FC_CAN_QUEUE_PERIOD)))
385 		return;
386 
387 	si->last_can_queue_ramp_down_time = jiffies;
388 
389 	can_queue = lport->host->can_queue;
390 	can_queue >>= 1;
391 	if (!can_queue)
392 		can_queue = 1;
393 	lport->host->can_queue = can_queue;
394 	shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
395 		     "Reducing can_queue to %d.\n", can_queue);
396 }
397 
398 /*
399  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
400  * @lport:	fc lport struct
401  * @len:	payload length
402  *
403  * Allocates fc_frame structure and buffer but if fails to allocate
404  * then reduce can_queue.
405  */
406 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
407 						  size_t len)
408 {
409 	struct fc_frame *fp;
410 	unsigned long flags;
411 
412 	fp = fc_frame_alloc(lport, len);
413 	if (likely(fp))
414 		return fp;
415 
416 	/* error case */
417 	spin_lock_irqsave(lport->host->host_lock, flags);
418 	fc_fcp_can_queue_ramp_down(lport);
419 	spin_unlock_irqrestore(lport->host->host_lock, flags);
420 	return NULL;
421 }
422 
423 /**
424  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
425  * @fsp: The FCP packet the data is on
426  * @fp:	 The data frame
427  */
428 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
429 {
430 	struct scsi_cmnd *sc = fsp->cmd;
431 	struct fc_lport *lport = fsp->lp;
432 	struct fcoe_dev_stats *stats;
433 	struct fc_frame_header *fh;
434 	size_t start_offset;
435 	size_t offset;
436 	u32 crc;
437 	u32 copy_len = 0;
438 	size_t len;
439 	void *buf;
440 	struct scatterlist *sg;
441 	u32 nents;
442 
443 	fh = fc_frame_header_get(fp);
444 	offset = ntohl(fh->fh_parm_offset);
445 	start_offset = offset;
446 	len = fr_len(fp) - sizeof(*fh);
447 	buf = fc_frame_payload_get(fp, 0);
448 
449 	/*
450 	 * if this I/O is ddped then clear it
451 	 * and initiate recovery since data
452 	 * frames are expected to be placed
453 	 * directly in that case.
454 	 */
455 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
456 		fc_fcp_ddp_done(fsp);
457 		goto err;
458 	}
459 	if (offset + len > fsp->data_len) {
460 		/* this should never happen */
461 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
462 		    fc_frame_crc_check(fp))
463 			goto crc_err;
464 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
465 			   "data_len %x\n", len, offset, fsp->data_len);
466 		goto err;
467 	}
468 	if (offset != fsp->xfer_len)
469 		fsp->state |= FC_SRB_DISCONTIG;
470 
471 	sg = scsi_sglist(sc);
472 	nents = scsi_sg_count(sc);
473 
474 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
475 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
476 						    &offset, KM_SOFTIRQ0, NULL);
477 	} else {
478 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
479 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
480 						    &offset, KM_SOFTIRQ0, &crc);
481 		buf = fc_frame_payload_get(fp, 0);
482 		if (len % 4)
483 			crc = crc32(crc, buf + len, 4 - (len % 4));
484 
485 		if (~crc != le32_to_cpu(fr_crc(fp))) {
486 crc_err:
487 			stats = per_cpu_ptr(lport->dev_stats, get_cpu());
488 			stats->ErrorFrames++;
489 			/* per cpu count, not total count, but OK for limit */
490 			if (stats->InvalidCRCCount++ < 5)
491 				printk(KERN_WARNING "libfc: CRC error on data "
492 				       "frame for port (%6.6x)\n",
493 				       lport->port_id);
494 			put_cpu();
495 			/*
496 			 * Assume the frame is total garbage.
497 			 * We may have copied it over the good part
498 			 * of the buffer.
499 			 * If so, we need to retry the entire operation.
500 			 * Otherwise, ignore it.
501 			 */
502 			if (fsp->state & FC_SRB_DISCONTIG)
503 				goto err;
504 			return;
505 		}
506 	}
507 
508 	if (fsp->xfer_contig_end == start_offset)
509 		fsp->xfer_contig_end += copy_len;
510 	fsp->xfer_len += copy_len;
511 
512 	/*
513 	 * In the very rare event that this data arrived after the response
514 	 * and completes the transfer, call the completion handler.
515 	 */
516 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
517 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
518 		fc_fcp_complete_locked(fsp);
519 	return;
520 err:
521 	fc_fcp_recovery(fsp);
522 }
523 
524 /**
525  * fc_fcp_send_data() - Send SCSI data to a target
526  * @fsp:      The FCP packet the data is on
527  * @sp:	      The sequence the data is to be sent on
528  * @offset:   The starting offset for this data request
529  * @seq_blen: The burst length for this data request
530  *
531  * Called after receiving a Transfer Ready data descriptor.
532  * If the LLD is capable of sequence offload then send down the
533  * seq_blen amount of data in single frame, otherwise send
534  * multiple frames of the maximum frame payload supported by
535  * the target port.
536  */
537 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
538 			    size_t offset, size_t seq_blen)
539 {
540 	struct fc_exch *ep;
541 	struct scsi_cmnd *sc;
542 	struct scatterlist *sg;
543 	struct fc_frame *fp = NULL;
544 	struct fc_lport *lport = fsp->lp;
545 	struct page *page;
546 	size_t remaining;
547 	size_t t_blen;
548 	size_t tlen;
549 	size_t sg_bytes;
550 	size_t frame_offset, fh_parm_offset;
551 	size_t off;
552 	int error;
553 	void *data = NULL;
554 	void *page_addr;
555 	int using_sg = lport->sg_supp;
556 	u32 f_ctl;
557 
558 	WARN_ON(seq_blen <= 0);
559 	if (unlikely(offset + seq_blen > fsp->data_len)) {
560 		/* this should never happen */
561 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
562 			   "offset %zx\n", seq_blen, offset);
563 		fc_fcp_send_abort(fsp);
564 		return 0;
565 	} else if (offset != fsp->xfer_len) {
566 		/* Out of Order Data Request - no problem, but unexpected. */
567 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
568 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
569 	}
570 
571 	/*
572 	 * if LLD is capable of seq_offload then set transport
573 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
574 	 * to max FC frame payload previously set in fsp->max_payload.
575 	 */
576 	t_blen = fsp->max_payload;
577 	if (lport->seq_offload) {
578 		t_blen = min(seq_blen, (size_t)lport->lso_max);
579 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
580 			   fsp, seq_blen, lport->lso_max, t_blen);
581 	}
582 
583 	if (t_blen > 512)
584 		t_blen &= ~(512 - 1);	/* round down to block size */
585 	sc = fsp->cmd;
586 
587 	remaining = seq_blen;
588 	fh_parm_offset = frame_offset = offset;
589 	tlen = 0;
590 	seq = lport->tt.seq_start_next(seq);
591 	f_ctl = FC_FC_REL_OFF;
592 	WARN_ON(!seq);
593 
594 	sg = scsi_sglist(sc);
595 
596 	while (remaining > 0 && sg) {
597 		if (offset >= sg->length) {
598 			offset -= sg->length;
599 			sg = sg_next(sg);
600 			continue;
601 		}
602 		if (!fp) {
603 			tlen = min(t_blen, remaining);
604 
605 			/*
606 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
607 			 * handle odd lengths in non-linear skbs.
608 			 * This will be the final fragment only.
609 			 */
610 			if (tlen % 4)
611 				using_sg = 0;
612 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
613 			if (!fp)
614 				return -ENOMEM;
615 
616 			data = fc_frame_header_get(fp) + 1;
617 			fh_parm_offset = frame_offset;
618 			fr_max_payload(fp) = fsp->max_payload;
619 		}
620 
621 		off = offset + sg->offset;
622 		sg_bytes = min(tlen, sg->length - offset);
623 		sg_bytes = min(sg_bytes,
624 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
625 		page = sg_page(sg) + (off >> PAGE_SHIFT);
626 		if (using_sg) {
627 			get_page(page);
628 			skb_fill_page_desc(fp_skb(fp),
629 					   skb_shinfo(fp_skb(fp))->nr_frags,
630 					   page, off & ~PAGE_MASK, sg_bytes);
631 			fp_skb(fp)->data_len += sg_bytes;
632 			fr_len(fp) += sg_bytes;
633 			fp_skb(fp)->truesize += PAGE_SIZE;
634 		} else {
635 			/*
636 			 * The scatterlist item may be bigger than PAGE_SIZE,
637 			 * but we must not cross pages inside the kmap.
638 			 */
639 			page_addr = kmap_atomic(page, KM_SOFTIRQ0);
640 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
641 			       sg_bytes);
642 			kunmap_atomic(page_addr, KM_SOFTIRQ0);
643 			data += sg_bytes;
644 		}
645 		offset += sg_bytes;
646 		frame_offset += sg_bytes;
647 		tlen -= sg_bytes;
648 		remaining -= sg_bytes;
649 
650 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
651 		    (tlen))
652 			continue;
653 
654 		/*
655 		 * Send sequence with transfer sequence initiative in case
656 		 * this is last FCP frame of the sequence.
657 		 */
658 		if (remaining == 0)
659 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
660 
661 		ep = fc_seq_exch(seq);
662 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
663 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
664 
665 		/*
666 		 * send fragment using for a sequence.
667 		 */
668 		error = lport->tt.seq_send(lport, seq, fp);
669 		if (error) {
670 			WARN_ON(1);		/* send error should be rare */
671 			fc_fcp_retry_cmd(fsp);
672 			return 0;
673 		}
674 		fp = NULL;
675 	}
676 	fsp->xfer_len += seq_blen;	/* premature count? */
677 	return 0;
678 }
679 
680 /**
681  * fc_fcp_abts_resp() - Send an ABTS response
682  * @fsp: The FCP packet that is being aborted
683  * @fp:	 The response frame
684  */
685 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
686 {
687 	int ba_done = 1;
688 	struct fc_ba_rjt *brp;
689 	struct fc_frame_header *fh;
690 
691 	fh = fc_frame_header_get(fp);
692 	switch (fh->fh_r_ctl) {
693 	case FC_RCTL_BA_ACC:
694 		break;
695 	case FC_RCTL_BA_RJT:
696 		brp = fc_frame_payload_get(fp, sizeof(*brp));
697 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
698 			break;
699 		/* fall thru */
700 	default:
701 		/*
702 		 * we will let the command timeout
703 		 * and scsi-ml recover in this case,
704 		 * therefore cleared the ba_done flag.
705 		 */
706 		ba_done = 0;
707 	}
708 
709 	if (ba_done) {
710 		fsp->state |= FC_SRB_ABORTED;
711 		fsp->state &= ~FC_SRB_ABORT_PENDING;
712 
713 		if (fsp->wait_for_comp)
714 			complete(&fsp->tm_done);
715 		else
716 			fc_fcp_complete_locked(fsp);
717 	}
718 }
719 
720 /**
721  * fc_fcp_recv() - Reveive an FCP frame
722  * @seq: The sequence the frame is on
723  * @fp:	 The received frame
724  * @arg: The related FCP packet
725  *
726  * Context: Called from Soft IRQ context. Can not be called
727  *	    holding the FCP packet list lock.
728  */
729 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
730 {
731 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
732 	struct fc_lport *lport = fsp->lp;
733 	struct fc_frame_header *fh;
734 	struct fcp_txrdy *dd;
735 	u8 r_ctl;
736 	int rc = 0;
737 
738 	if (IS_ERR(fp)) {
739 		fc_fcp_error(fsp, fp);
740 		return;
741 	}
742 
743 	fh = fc_frame_header_get(fp);
744 	r_ctl = fh->fh_r_ctl;
745 
746 	if (lport->state != LPORT_ST_READY)
747 		goto out;
748 	if (fc_fcp_lock_pkt(fsp))
749 		goto out;
750 	fsp->last_pkt_time = jiffies;
751 
752 	if (fh->fh_type == FC_TYPE_BLS) {
753 		fc_fcp_abts_resp(fsp, fp);
754 		goto unlock;
755 	}
756 
757 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
758 		goto unlock;
759 
760 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
761 		/*
762 		 * received XFER RDY from the target
763 		 * need to send data to the target
764 		 */
765 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
766 		dd = fc_frame_payload_get(fp, sizeof(*dd));
767 		WARN_ON(!dd);
768 
769 		rc = fc_fcp_send_data(fsp, seq,
770 				      (size_t) ntohl(dd->ft_data_ro),
771 				      (size_t) ntohl(dd->ft_burst_len));
772 		if (!rc)
773 			seq->rec_data = fsp->xfer_len;
774 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
775 		/*
776 		 * received a DATA frame
777 		 * next we will copy the data to the system buffer
778 		 */
779 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
780 		fc_fcp_recv_data(fsp, fp);
781 		seq->rec_data = fsp->xfer_contig_end;
782 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
783 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
784 
785 		fc_fcp_resp(fsp, fp);
786 	} else {
787 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
788 	}
789 unlock:
790 	fc_fcp_unlock_pkt(fsp);
791 out:
792 	fc_frame_free(fp);
793 }
794 
795 /**
796  * fc_fcp_resp() - Handler for FCP responses
797  * @fsp: The FCP packet the response is for
798  * @fp:	 The response frame
799  */
800 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
801 {
802 	struct fc_frame_header *fh;
803 	struct fcp_resp *fc_rp;
804 	struct fcp_resp_ext *rp_ex;
805 	struct fcp_resp_rsp_info *fc_rp_info;
806 	u32 plen;
807 	u32 expected_len;
808 	u32 respl = 0;
809 	u32 snsl = 0;
810 	u8 flags = 0;
811 
812 	plen = fr_len(fp);
813 	fh = (struct fc_frame_header *)fr_hdr(fp);
814 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
815 		goto len_err;
816 	plen -= sizeof(*fh);
817 	fc_rp = (struct fcp_resp *)(fh + 1);
818 	fsp->cdb_status = fc_rp->fr_status;
819 	flags = fc_rp->fr_flags;
820 	fsp->scsi_comp_flags = flags;
821 	expected_len = fsp->data_len;
822 
823 	/* if ddp, update xfer len */
824 	fc_fcp_ddp_done(fsp);
825 
826 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
827 		rp_ex = (void *)(fc_rp + 1);
828 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
829 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
830 				goto len_err;
831 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
832 			if (flags & FCP_RSP_LEN_VAL) {
833 				respl = ntohl(rp_ex->fr_rsp_len);
834 				if (respl != sizeof(*fc_rp_info))
835 					goto len_err;
836 				if (fsp->wait_for_comp) {
837 					/* Abuse cdb_status for rsp code */
838 					fsp->cdb_status = fc_rp_info->rsp_code;
839 					complete(&fsp->tm_done);
840 					/*
841 					 * tmfs will not have any scsi cmd so
842 					 * exit here
843 					 */
844 					return;
845 				}
846 			}
847 			if (flags & FCP_SNS_LEN_VAL) {
848 				snsl = ntohl(rp_ex->fr_sns_len);
849 				if (snsl > SCSI_SENSE_BUFFERSIZE)
850 					snsl = SCSI_SENSE_BUFFERSIZE;
851 				memcpy(fsp->cmd->sense_buffer,
852 				       (char *)fc_rp_info + respl, snsl);
853 			}
854 		}
855 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
856 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
857 				goto len_err;
858 			if (flags & FCP_RESID_UNDER) {
859 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
860 				/*
861 				 * The cmnd->underflow is the minimum number of
862 				 * bytes that must be transfered for this
863 				 * command.  Provided a sense condition is not
864 				 * present, make sure the actual amount
865 				 * transferred is at least the underflow value
866 				 * or fail.
867 				 */
868 				if (!(flags & FCP_SNS_LEN_VAL) &&
869 				    (fc_rp->fr_status == 0) &&
870 				    (scsi_bufflen(fsp->cmd) -
871 				     fsp->scsi_resid) < fsp->cmd->underflow)
872 					goto err;
873 				expected_len -= fsp->scsi_resid;
874 			} else {
875 				fsp->status_code = FC_ERROR;
876 			}
877 		}
878 	}
879 	fsp->state |= FC_SRB_RCV_STATUS;
880 
881 	/*
882 	 * Check for missing or extra data frames.
883 	 */
884 	if (unlikely(fsp->xfer_len != expected_len)) {
885 		if (fsp->xfer_len < expected_len) {
886 			/*
887 			 * Some data may be queued locally,
888 			 * Wait a at least one jiffy to see if it is delivered.
889 			 * If this expires without data, we may do SRR.
890 			 */
891 			fc_fcp_timer_set(fsp, 2);
892 			return;
893 		}
894 		fsp->status_code = FC_DATA_OVRRUN;
895 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
896 			   "len %x, data len %x\n",
897 			   fsp->rport->port_id,
898 			   fsp->xfer_len, expected_len, fsp->data_len);
899 	}
900 	fc_fcp_complete_locked(fsp);
901 	return;
902 
903 len_err:
904 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
905 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
906 err:
907 	fsp->status_code = FC_ERROR;
908 	fc_fcp_complete_locked(fsp);
909 }
910 
911 /**
912  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
913  *			      fcp_pkt lock held
914  * @fsp: The FCP packet to be completed
915  *
916  * This function may sleep if a timer is pending. The packet lock must be
917  * held, and the host lock must not be held.
918  */
919 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
920 {
921 	struct fc_lport *lport = fsp->lp;
922 	struct fc_seq *seq;
923 	struct fc_exch *ep;
924 	u32 f_ctl;
925 
926 	if (fsp->state & FC_SRB_ABORT_PENDING)
927 		return;
928 
929 	if (fsp->state & FC_SRB_ABORTED) {
930 		if (!fsp->status_code)
931 			fsp->status_code = FC_CMD_ABORTED;
932 	} else {
933 		/*
934 		 * Test for transport underrun, independent of response
935 		 * underrun status.
936 		 */
937 		if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
938 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
939 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
940 			fsp->status_code = FC_DATA_UNDRUN;
941 			fsp->io_status = 0;
942 		}
943 	}
944 
945 	seq = fsp->seq_ptr;
946 	if (seq) {
947 		fsp->seq_ptr = NULL;
948 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
949 			struct fc_frame *conf_frame;
950 			struct fc_seq *csp;
951 
952 			csp = lport->tt.seq_start_next(seq);
953 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
954 			if (conf_frame) {
955 				f_ctl = FC_FC_SEQ_INIT;
956 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
957 				ep = fc_seq_exch(seq);
958 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
959 					       ep->did, ep->sid,
960 					       FC_TYPE_FCP, f_ctl, 0);
961 				lport->tt.seq_send(lport, csp, conf_frame);
962 			}
963 		}
964 		lport->tt.exch_done(seq);
965 	}
966 	fc_io_compl(fsp);
967 }
968 
969 /**
970  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
971  * @fsp:   The FCP packet whose exchanges should be canceled
972  * @error: The reason for the cancellation
973  */
974 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
975 {
976 	struct fc_lport *lport = fsp->lp;
977 
978 	if (fsp->seq_ptr) {
979 		lport->tt.exch_done(fsp->seq_ptr);
980 		fsp->seq_ptr = NULL;
981 	}
982 	fsp->status_code = error;
983 }
984 
985 /**
986  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
987  * @lport: The local port whose exchanges should be canceled
988  * @id:	   The target's ID
989  * @lun:   The LUN
990  * @error: The reason for cancellation
991  *
992  * If lun or id is -1, they are ignored.
993  */
994 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
995 				    unsigned int lun, int error)
996 {
997 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
998 	struct fc_fcp_pkt *fsp;
999 	struct scsi_cmnd *sc_cmd;
1000 	unsigned long flags;
1001 
1002 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1003 restart:
1004 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1005 		sc_cmd = fsp->cmd;
1006 		if (id != -1 && scmd_id(sc_cmd) != id)
1007 			continue;
1008 
1009 		if (lun != -1 && sc_cmd->device->lun != lun)
1010 			continue;
1011 
1012 		fc_fcp_pkt_hold(fsp);
1013 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1014 
1015 		if (!fc_fcp_lock_pkt(fsp)) {
1016 			fc_fcp_cleanup_cmd(fsp, error);
1017 			fc_io_compl(fsp);
1018 			fc_fcp_unlock_pkt(fsp);
1019 		}
1020 
1021 		fc_fcp_pkt_release(fsp);
1022 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1023 		/*
1024 		 * while we dropped the lock multiple pkts could
1025 		 * have been released, so we have to start over.
1026 		 */
1027 		goto restart;
1028 	}
1029 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1030 }
1031 
1032 /**
1033  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1034  * @lport: The local port whose exchanges are to be aborted
1035  */
1036 static void fc_fcp_abort_io(struct fc_lport *lport)
1037 {
1038 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1039 }
1040 
1041 /**
1042  * fc_fcp_pkt_send() - Send a fcp_pkt
1043  * @lport: The local port to send the FCP packet on
1044  * @fsp:   The FCP packet to send
1045  *
1046  * Return:  Zero for success and -1 for failure
1047  * Locks:   Called without locks held
1048  */
1049 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1050 {
1051 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1052 	unsigned long flags;
1053 	int rc;
1054 
1055 	fsp->cmd->SCp.ptr = (char *)fsp;
1056 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1057 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1058 
1059 	int_to_scsilun(fsp->cmd->device->lun,
1060 		       (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1061 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1062 
1063 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1064 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1065 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1066 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1067 	if (unlikely(rc)) {
1068 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1069 		list_del(&fsp->list);
1070 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1071 	}
1072 
1073 	return rc;
1074 }
1075 
1076 /**
1077  * fc_fcp_cmd_send() - Send a FCP command
1078  * @lport: The local port to send the command on
1079  * @fsp:   The FCP packet the command is on
1080  * @resp:  The handler for the response
1081  */
1082 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1083 			   void (*resp)(struct fc_seq *,
1084 					struct fc_frame *fp,
1085 					void *arg))
1086 {
1087 	struct fc_frame *fp;
1088 	struct fc_seq *seq;
1089 	struct fc_rport *rport;
1090 	struct fc_rport_libfc_priv *rpriv;
1091 	const size_t len = sizeof(fsp->cdb_cmd);
1092 	int rc = 0;
1093 
1094 	if (fc_fcp_lock_pkt(fsp))
1095 		return 0;
1096 
1097 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1098 	if (!fp) {
1099 		rc = -1;
1100 		goto unlock;
1101 	}
1102 
1103 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1104 	fr_fsp(fp) = fsp;
1105 	rport = fsp->rport;
1106 	fsp->max_payload = rport->maxframe_size;
1107 	rpriv = rport->dd_data;
1108 
1109 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1110 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1111 		       FC_FCTL_REQ, 0);
1112 
1113 	seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1114 				      fsp, 0);
1115 	if (!seq) {
1116 		rc = -1;
1117 		goto unlock;
1118 	}
1119 	fsp->last_pkt_time = jiffies;
1120 	fsp->seq_ptr = seq;
1121 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1122 
1123 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1124 	fc_fcp_timer_set(fsp,
1125 			 (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ?
1126 			 FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT);
1127 unlock:
1128 	fc_fcp_unlock_pkt(fsp);
1129 	return rc;
1130 }
1131 
1132 /**
1133  * fc_fcp_error() - Handler for FCP layer errors
1134  * @fsp: The FCP packet the error is on
1135  * @fp:	 The frame that has errored
1136  */
1137 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1138 {
1139 	int error = PTR_ERR(fp);
1140 
1141 	if (fc_fcp_lock_pkt(fsp))
1142 		return;
1143 
1144 	if (error == -FC_EX_CLOSED) {
1145 		fc_fcp_retry_cmd(fsp);
1146 		goto unlock;
1147 	}
1148 
1149 	/*
1150 	 * clear abort pending, because the lower layer
1151 	 * decided to force completion.
1152 	 */
1153 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1154 	fsp->status_code = FC_CMD_PLOGO;
1155 	fc_fcp_complete_locked(fsp);
1156 unlock:
1157 	fc_fcp_unlock_pkt(fsp);
1158 }
1159 
1160 /**
1161  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1162  * @fsp:   The FCP packet to abort on
1163  *
1164  * Called to send an abort and then wait for abort completion
1165  */
1166 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1167 {
1168 	int rc = FAILED;
1169 
1170 	if (fc_fcp_send_abort(fsp))
1171 		return FAILED;
1172 
1173 	init_completion(&fsp->tm_done);
1174 	fsp->wait_for_comp = 1;
1175 
1176 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1177 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1178 	spin_lock_bh(&fsp->scsi_pkt_lock);
1179 	fsp->wait_for_comp = 0;
1180 
1181 	if (!rc) {
1182 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1183 		rc = FAILED;
1184 	} else if (fsp->state & FC_SRB_ABORTED) {
1185 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1186 		rc = SUCCESS;
1187 		fc_fcp_complete_locked(fsp);
1188 	}
1189 
1190 	return rc;
1191 }
1192 
1193 /**
1194  * fc_lun_reset_send() - Send LUN reset command
1195  * @data: The FCP packet that identifies the LUN to be reset
1196  */
1197 static void fc_lun_reset_send(unsigned long data)
1198 {
1199 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1200 	struct fc_lport *lport = fsp->lp;
1201 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1202 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1203 			return;
1204 		if (fc_fcp_lock_pkt(fsp))
1205 			return;
1206 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1207 		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1208 		fc_fcp_unlock_pkt(fsp);
1209 	}
1210 }
1211 
1212 /**
1213  * fc_lun_reset() - Send a LUN RESET command to a device
1214  *		    and wait for the reply
1215  * @lport: The local port to sent the comand on
1216  * @fsp:   The FCP packet that identifies the LUN to be reset
1217  * @id:	   The SCSI command ID
1218  * @lun:   The LUN ID to be reset
1219  */
1220 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1221 			unsigned int id, unsigned int lun)
1222 {
1223 	int rc;
1224 
1225 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1226 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1227 	int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1228 
1229 	fsp->wait_for_comp = 1;
1230 	init_completion(&fsp->tm_done);
1231 
1232 	fc_lun_reset_send((unsigned long)fsp);
1233 
1234 	/*
1235 	 * wait for completion of reset
1236 	 * after that make sure all commands are terminated
1237 	 */
1238 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1239 
1240 	spin_lock_bh(&fsp->scsi_pkt_lock);
1241 	fsp->state |= FC_SRB_COMPL;
1242 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1243 
1244 	del_timer_sync(&fsp->timer);
1245 
1246 	spin_lock_bh(&fsp->scsi_pkt_lock);
1247 	if (fsp->seq_ptr) {
1248 		lport->tt.exch_done(fsp->seq_ptr);
1249 		fsp->seq_ptr = NULL;
1250 	}
1251 	fsp->wait_for_comp = 0;
1252 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1253 
1254 	if (!rc) {
1255 		FC_SCSI_DBG(lport, "lun reset failed\n");
1256 		return FAILED;
1257 	}
1258 
1259 	/* cdb_status holds the tmf's rsp code */
1260 	if (fsp->cdb_status != FCP_TMF_CMPL)
1261 		return FAILED;
1262 
1263 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1264 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1265 	return SUCCESS;
1266 }
1267 
1268 /**
1269  * fc_tm_done() - Task Managment response handler
1270  * @seq: The sequence that the response is on
1271  * @fp:	 The response frame
1272  * @arg: The FCP packet the response is for
1273  */
1274 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1275 {
1276 	struct fc_fcp_pkt *fsp = arg;
1277 	struct fc_frame_header *fh;
1278 
1279 	if (IS_ERR(fp)) {
1280 		/*
1281 		 * If there is an error just let it timeout or wait
1282 		 * for TMF to be aborted if it timedout.
1283 		 *
1284 		 * scsi-eh will escalate for when either happens.
1285 		 */
1286 		return;
1287 	}
1288 
1289 	if (fc_fcp_lock_pkt(fsp))
1290 		return;
1291 
1292 	/*
1293 	 * raced with eh timeout handler.
1294 	 */
1295 	if (!fsp->seq_ptr || !fsp->wait_for_comp) {
1296 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1297 		return;
1298 	}
1299 
1300 	fh = fc_frame_header_get(fp);
1301 	if (fh->fh_type != FC_TYPE_BLS)
1302 		fc_fcp_resp(fsp, fp);
1303 	fsp->seq_ptr = NULL;
1304 	fsp->lp->tt.exch_done(seq);
1305 	fc_frame_free(fp);
1306 	fc_fcp_unlock_pkt(fsp);
1307 }
1308 
1309 /**
1310  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1311  * @lport: The local port to be cleaned up
1312  */
1313 static void fc_fcp_cleanup(struct fc_lport *lport)
1314 {
1315 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1316 }
1317 
1318 /**
1319  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1320  * @data: The FCP packet that has timed out
1321  *
1322  * If REC is supported then just issue it and return. The REC exchange will
1323  * complete or time out and recovery can continue at that point. Otherwise,
1324  * if the response has been received without all the data it has been
1325  * ER_TIMEOUT since the response was received. If the response has not been
1326  * received we see if data was received recently. If it has been then we
1327  * continue waiting, otherwise, we abort the command.
1328  */
1329 static void fc_fcp_timeout(unsigned long data)
1330 {
1331 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1332 	struct fc_rport *rport = fsp->rport;
1333 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1334 
1335 	if (fc_fcp_lock_pkt(fsp))
1336 		return;
1337 
1338 	if (fsp->cdb_cmd.fc_tm_flags)
1339 		goto unlock;
1340 
1341 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1342 
1343 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1344 		fc_fcp_rec(fsp);
1345 	else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2),
1346 			       jiffies))
1347 		fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
1348 	else if (fsp->state & FC_SRB_RCV_STATUS)
1349 		fc_fcp_complete_locked(fsp);
1350 	else
1351 		fc_fcp_recovery(fsp);
1352 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1353 unlock:
1354 	fc_fcp_unlock_pkt(fsp);
1355 }
1356 
1357 /**
1358  * fc_fcp_rec() - Send a REC ELS request
1359  * @fsp: The FCP packet to send the REC request on
1360  */
1361 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1362 {
1363 	struct fc_lport *lport;
1364 	struct fc_frame *fp;
1365 	struct fc_rport *rport;
1366 	struct fc_rport_libfc_priv *rpriv;
1367 
1368 	lport = fsp->lp;
1369 	rport = fsp->rport;
1370 	rpriv = rport->dd_data;
1371 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1372 		fsp->status_code = FC_HRD_ERROR;
1373 		fsp->io_status = 0;
1374 		fc_fcp_complete_locked(fsp);
1375 		return;
1376 	}
1377 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1378 	if (!fp)
1379 		goto retry;
1380 
1381 	fr_seq(fp) = fsp->seq_ptr;
1382 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1383 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1384 		       FC_FCTL_REQ, 0);
1385 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1386 				 fc_fcp_rec_resp, fsp,
1387 				 jiffies_to_msecs(FC_SCSI_REC_TOV))) {
1388 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1389 		return;
1390 	}
1391 retry:
1392 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1393 		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1394 	else
1395 		fc_fcp_recovery(fsp);
1396 }
1397 
1398 /**
1399  * fc_fcp_rec_resp() - Handler for REC ELS responses
1400  * @seq: The sequence the response is on
1401  * @fp:	 The response frame
1402  * @arg: The FCP packet the response is on
1403  *
1404  * If the response is a reject then the scsi layer will handle
1405  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1406  * set the timeout and return. If the I/O was completed then complete the
1407  * exchange and tell the SCSI layer.
1408  */
1409 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1410 {
1411 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1412 	struct fc_els_rec_acc *recp;
1413 	struct fc_els_ls_rjt *rjt;
1414 	u32 e_stat;
1415 	u8 opcode;
1416 	u32 offset;
1417 	enum dma_data_direction data_dir;
1418 	enum fc_rctl r_ctl;
1419 	struct fc_rport_libfc_priv *rpriv;
1420 
1421 	if (IS_ERR(fp)) {
1422 		fc_fcp_rec_error(fsp, fp);
1423 		return;
1424 	}
1425 
1426 	if (fc_fcp_lock_pkt(fsp))
1427 		goto out;
1428 
1429 	fsp->recov_retry = 0;
1430 	opcode = fc_frame_payload_op(fp);
1431 	if (opcode == ELS_LS_RJT) {
1432 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1433 		switch (rjt->er_reason) {
1434 		default:
1435 			FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1436 				   "reason %d expl %d\n",
1437 				   fsp->rport->port_id, rjt->er_reason,
1438 				   rjt->er_explan);
1439 			/* fall through */
1440 		case ELS_RJT_UNSUP:
1441 			FC_FCP_DBG(fsp, "device does not support REC\n");
1442 			rpriv = fsp->rport->dd_data;
1443 			/*
1444 			 * if we do not spport RECs or got some bogus
1445 			 * reason then resetup timer so we check for
1446 			 * making progress.
1447 			 */
1448 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1449 			fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
1450 			break;
1451 		case ELS_RJT_LOGIC:
1452 		case ELS_RJT_UNAB:
1453 			/*
1454 			 * If no data transfer, the command frame got dropped
1455 			 * so we just retry.  If data was transferred, we
1456 			 * lost the response but the target has no record,
1457 			 * so we abort and retry.
1458 			 */
1459 			if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1460 			    fsp->xfer_len == 0) {
1461 				fc_fcp_retry_cmd(fsp);
1462 				break;
1463 			}
1464 			fc_fcp_recovery(fsp);
1465 			break;
1466 		}
1467 	} else if (opcode == ELS_LS_ACC) {
1468 		if (fsp->state & FC_SRB_ABORTED)
1469 			goto unlock_out;
1470 
1471 		data_dir = fsp->cmd->sc_data_direction;
1472 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1473 		offset = ntohl(recp->reca_fc4value);
1474 		e_stat = ntohl(recp->reca_e_stat);
1475 
1476 		if (e_stat & ESB_ST_COMPLETE) {
1477 
1478 			/*
1479 			 * The exchange is complete.
1480 			 *
1481 			 * For output, we must've lost the response.
1482 			 * For input, all data must've been sent.
1483 			 * We lost may have lost the response
1484 			 * (and a confirmation was requested) and maybe
1485 			 * some data.
1486 			 *
1487 			 * If all data received, send SRR
1488 			 * asking for response.	 If partial data received,
1489 			 * or gaps, SRR requests data at start of gap.
1490 			 * Recovery via SRR relies on in-order-delivery.
1491 			 */
1492 			if (data_dir == DMA_TO_DEVICE) {
1493 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1494 			} else if (fsp->xfer_contig_end == offset) {
1495 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1496 			} else {
1497 				offset = fsp->xfer_contig_end;
1498 				r_ctl = FC_RCTL_DD_SOL_DATA;
1499 			}
1500 			fc_fcp_srr(fsp, r_ctl, offset);
1501 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1502 
1503 			/*
1504 			 * The remote port has the initiative, so just
1505 			 * keep waiting for it to complete.
1506 			 */
1507 			fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1508 		} else {
1509 
1510 			/*
1511 			 * The exchange is incomplete, we have seq. initiative.
1512 			 * Lost response with requested confirmation,
1513 			 * lost confirmation, lost transfer ready or
1514 			 * lost write data.
1515 			 *
1516 			 * For output, if not all data was received, ask
1517 			 * for transfer ready to be repeated.
1518 			 *
1519 			 * If we received or sent all the data, send SRR to
1520 			 * request response.
1521 			 *
1522 			 * If we lost a response, we may have lost some read
1523 			 * data as well.
1524 			 */
1525 			r_ctl = FC_RCTL_DD_SOL_DATA;
1526 			if (data_dir == DMA_TO_DEVICE) {
1527 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1528 				if (offset < fsp->data_len)
1529 					r_ctl = FC_RCTL_DD_DATA_DESC;
1530 			} else if (offset == fsp->xfer_contig_end) {
1531 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1532 			} else if (fsp->xfer_contig_end < offset) {
1533 				offset = fsp->xfer_contig_end;
1534 			}
1535 			fc_fcp_srr(fsp, r_ctl, offset);
1536 		}
1537 	}
1538 unlock_out:
1539 	fc_fcp_unlock_pkt(fsp);
1540 out:
1541 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1542 	fc_frame_free(fp);
1543 }
1544 
1545 /**
1546  * fc_fcp_rec_error() - Handler for REC errors
1547  * @fsp: The FCP packet the error is on
1548  * @fp:	 The REC frame
1549  */
1550 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1551 {
1552 	int error = PTR_ERR(fp);
1553 
1554 	if (fc_fcp_lock_pkt(fsp))
1555 		goto out;
1556 
1557 	switch (error) {
1558 	case -FC_EX_CLOSED:
1559 		fc_fcp_retry_cmd(fsp);
1560 		break;
1561 
1562 	default:
1563 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1564 			   fsp, fsp->rport->port_id, error);
1565 		fsp->status_code = FC_CMD_PLOGO;
1566 		/* fall through */
1567 
1568 	case -FC_EX_TIMEOUT:
1569 		/*
1570 		 * Assume REC or LS_ACC was lost.
1571 		 * The exchange manager will have aborted REC, so retry.
1572 		 */
1573 		FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1574 			   fsp->rport->port_id, error, fsp->recov_retry,
1575 			   FC_MAX_RECOV_RETRY);
1576 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1577 			fc_fcp_rec(fsp);
1578 		else
1579 			fc_fcp_recovery(fsp);
1580 		break;
1581 	}
1582 	fc_fcp_unlock_pkt(fsp);
1583 out:
1584 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1585 }
1586 
1587 /**
1588  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1589  * @fsp: The FCP pkt that needs to be aborted
1590  */
1591 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp)
1592 {
1593 	fsp->status_code = FC_CMD_RECOVERY;
1594 	fsp->cdb_status = 0;
1595 	fsp->io_status = 0;
1596 	/*
1597 	 * if this fails then we let the scsi command timer fire and
1598 	 * scsi-ml escalate.
1599 	 */
1600 	fc_fcp_send_abort(fsp);
1601 }
1602 
1603 /**
1604  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1605  * @fsp:   The FCP packet the SRR is to be sent on
1606  * @r_ctl: The R_CTL field for the SRR request
1607  * This is called after receiving status but insufficient data, or
1608  * when expecting status but the request has timed out.
1609  */
1610 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1611 {
1612 	struct fc_lport *lport = fsp->lp;
1613 	struct fc_rport *rport;
1614 	struct fc_rport_libfc_priv *rpriv;
1615 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1616 	struct fc_seq *seq;
1617 	struct fcp_srr *srr;
1618 	struct fc_frame *fp;
1619 	u8 cdb_op;
1620 
1621 	rport = fsp->rport;
1622 	rpriv = rport->dd_data;
1623 	cdb_op = fsp->cdb_cmd.fc_cdb[0];
1624 
1625 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1626 	    rpriv->rp_state != RPORT_ST_READY)
1627 		goto retry;			/* shouldn't happen */
1628 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1629 	if (!fp)
1630 		goto retry;
1631 
1632 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1633 	memset(srr, 0, sizeof(*srr));
1634 	srr->srr_op = ELS_SRR;
1635 	srr->srr_ox_id = htons(ep->oxid);
1636 	srr->srr_rx_id = htons(ep->rxid);
1637 	srr->srr_r_ctl = r_ctl;
1638 	srr->srr_rel_off = htonl(offset);
1639 
1640 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1641 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1642 		       FC_FCTL_REQ, 0);
1643 
1644 	seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL,
1645 				      fsp, jiffies_to_msecs(FC_SCSI_REC_TOV));
1646 	if (!seq)
1647 		goto retry;
1648 
1649 	fsp->recov_seq = seq;
1650 	fsp->xfer_len = offset;
1651 	fsp->xfer_contig_end = offset;
1652 	fsp->state &= ~FC_SRB_RCV_STATUS;
1653 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1654 	return;
1655 retry:
1656 	fc_fcp_retry_cmd(fsp);
1657 }
1658 
1659 /**
1660  * fc_fcp_srr_resp() - Handler for SRR response
1661  * @seq: The sequence the SRR is on
1662  * @fp:	 The SRR frame
1663  * @arg: The FCP packet the SRR is on
1664  */
1665 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1666 {
1667 	struct fc_fcp_pkt *fsp = arg;
1668 	struct fc_frame_header *fh;
1669 
1670 	if (IS_ERR(fp)) {
1671 		fc_fcp_srr_error(fsp, fp);
1672 		return;
1673 	}
1674 
1675 	if (fc_fcp_lock_pkt(fsp))
1676 		goto out;
1677 
1678 	fh = fc_frame_header_get(fp);
1679 	/*
1680 	 * BUG? fc_fcp_srr_error calls exch_done which would release
1681 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1682 	 * then fc_exch_timeout would be sending an abort. The exch_done
1683 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1684 	 * an abort response though.
1685 	 */
1686 	if (fh->fh_type == FC_TYPE_BLS) {
1687 		fc_fcp_unlock_pkt(fsp);
1688 		return;
1689 	}
1690 
1691 	fsp->recov_seq = NULL;
1692 	switch (fc_frame_payload_op(fp)) {
1693 	case ELS_LS_ACC:
1694 		fsp->recov_retry = 0;
1695 		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1696 		break;
1697 	case ELS_LS_RJT:
1698 	default:
1699 		fc_fcp_recovery(fsp);
1700 		break;
1701 	}
1702 	fc_fcp_unlock_pkt(fsp);
1703 	fsp->lp->tt.exch_done(seq);
1704 out:
1705 	fc_frame_free(fp);
1706 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding SRR */
1707 }
1708 
1709 /**
1710  * fc_fcp_srr_error() - Handler for SRR errors
1711  * @fsp: The FCP packet that the SRR error is on
1712  * @fp:	 The SRR frame
1713  */
1714 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1715 {
1716 	if (fc_fcp_lock_pkt(fsp))
1717 		goto out;
1718 	fsp->lp->tt.exch_done(fsp->recov_seq);
1719 	fsp->recov_seq = NULL;
1720 	switch (PTR_ERR(fp)) {
1721 	case -FC_EX_TIMEOUT:
1722 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1723 			fc_fcp_rec(fsp);
1724 		else
1725 			fc_fcp_recovery(fsp);
1726 		break;
1727 	case -FC_EX_CLOSED:			/* e.g., link failure */
1728 		/* fall through */
1729 	default:
1730 		fc_fcp_retry_cmd(fsp);
1731 		break;
1732 	}
1733 	fc_fcp_unlock_pkt(fsp);
1734 out:
1735 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding SRR */
1736 }
1737 
1738 /**
1739  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1740  * @lport: The local port to be checked
1741  */
1742 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1743 {
1744 	/* lock ? */
1745 	return (lport->state == LPORT_ST_READY) &&
1746 		lport->link_up && !lport->qfull;
1747 }
1748 
1749 /**
1750  * fc_queuecommand() - The queuecommand function of the SCSI template
1751  * @cmd:   The scsi_cmnd to be executed
1752  * @done:  The callback function to be called when the scsi_cmnd is complete
1753  *
1754  * This is the i/o strategy routine, called by the SCSI layer. This routine
1755  * is called with the host_lock held.
1756  */
1757 int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
1758 {
1759 	struct fc_lport *lport;
1760 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1761 	struct fc_fcp_pkt *fsp;
1762 	struct fc_rport_libfc_priv *rpriv;
1763 	int rval;
1764 	int rc = 0;
1765 	struct fcoe_dev_stats *stats;
1766 
1767 	lport = shost_priv(sc_cmd->device->host);
1768 
1769 	rval = fc_remote_port_chkready(rport);
1770 	if (rval) {
1771 		sc_cmd->result = rval;
1772 		done(sc_cmd);
1773 		return 0;
1774 	}
1775 	spin_unlock_irq(lport->host->host_lock);
1776 
1777 	if (!*(struct fc_remote_port **)rport->dd_data) {
1778 		/*
1779 		 * rport is transitioning from blocked/deleted to
1780 		 * online
1781 		 */
1782 		sc_cmd->result = DID_IMM_RETRY << 16;
1783 		done(sc_cmd);
1784 		goto out;
1785 	}
1786 
1787 	rpriv = rport->dd_data;
1788 
1789 	if (!fc_fcp_lport_queue_ready(lport)) {
1790 		if (lport->qfull)
1791 			fc_fcp_can_queue_ramp_down(lport);
1792 		rc = SCSI_MLQUEUE_HOST_BUSY;
1793 		goto out;
1794 	}
1795 
1796 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1797 	if (fsp == NULL) {
1798 		rc = SCSI_MLQUEUE_HOST_BUSY;
1799 		goto out;
1800 	}
1801 
1802 	/*
1803 	 * build the libfc request pkt
1804 	 */
1805 	fsp->cmd = sc_cmd;	/* save the cmd */
1806 	fsp->lp = lport;	/* save the softc ptr */
1807 	fsp->rport = rport;	/* set the remote port ptr */
1808 	fsp->xfer_ddp = FC_XID_UNKNOWN;
1809 	sc_cmd->scsi_done = done;
1810 
1811 	/*
1812 	 * set up the transfer length
1813 	 */
1814 	fsp->data_len = scsi_bufflen(sc_cmd);
1815 	fsp->xfer_len = 0;
1816 
1817 	/*
1818 	 * setup the data direction
1819 	 */
1820 	stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1821 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1822 		fsp->req_flags = FC_SRB_READ;
1823 		stats->InputRequests++;
1824 		stats->InputMegabytes = fsp->data_len;
1825 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1826 		fsp->req_flags = FC_SRB_WRITE;
1827 		stats->OutputRequests++;
1828 		stats->OutputMegabytes = fsp->data_len;
1829 	} else {
1830 		fsp->req_flags = 0;
1831 		stats->ControlRequests++;
1832 	}
1833 	put_cpu();
1834 
1835 	fsp->tgt_flags = rpriv->flags;
1836 
1837 	init_timer(&fsp->timer);
1838 	fsp->timer.data = (unsigned long)fsp;
1839 
1840 	/*
1841 	 * send it to the lower layer
1842 	 * if we get -1 return then put the request in the pending
1843 	 * queue.
1844 	 */
1845 	rval = fc_fcp_pkt_send(lport, fsp);
1846 	if (rval != 0) {
1847 		fsp->state = FC_SRB_FREE;
1848 		fc_fcp_pkt_release(fsp);
1849 		rc = SCSI_MLQUEUE_HOST_BUSY;
1850 	}
1851 out:
1852 	spin_lock_irq(lport->host->host_lock);
1853 	return rc;
1854 }
1855 EXPORT_SYMBOL(fc_queuecommand);
1856 
1857 /**
1858  * fc_io_compl() - Handle responses for completed commands
1859  * @fsp: The FCP packet that is complete
1860  *
1861  * Translates fcp_pkt errors to a Linux SCSI errors.
1862  * The fcp packet lock must be held when calling.
1863  */
1864 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1865 {
1866 	struct fc_fcp_internal *si;
1867 	struct scsi_cmnd *sc_cmd;
1868 	struct fc_lport *lport;
1869 	unsigned long flags;
1870 
1871 	/* release outstanding ddp context */
1872 	fc_fcp_ddp_done(fsp);
1873 
1874 	fsp->state |= FC_SRB_COMPL;
1875 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1876 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1877 		del_timer_sync(&fsp->timer);
1878 		spin_lock_bh(&fsp->scsi_pkt_lock);
1879 	}
1880 
1881 	lport = fsp->lp;
1882 	si = fc_get_scsi_internal(lport);
1883 	if (!fsp->cmd)
1884 		return;
1885 
1886 	/*
1887 	 * if can_queue ramp down is done then try can_queue ramp up
1888 	 * since commands are completing now.
1889 	 */
1890 	if (si->last_can_queue_ramp_down_time)
1891 		fc_fcp_can_queue_ramp_up(lport);
1892 
1893 	sc_cmd = fsp->cmd;
1894 	fsp->cmd = NULL;
1895 
1896 	if (!sc_cmd->SCp.ptr)
1897 		return;
1898 
1899 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1900 	switch (fsp->status_code) {
1901 	case FC_COMPLETE:
1902 		if (fsp->cdb_status == 0) {
1903 			/*
1904 			 * good I/O status
1905 			 */
1906 			sc_cmd->result = DID_OK << 16;
1907 			if (fsp->scsi_resid)
1908 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1909 		} else {
1910 			/*
1911 			 * transport level I/O was ok but scsi
1912 			 * has non zero status
1913 			 */
1914 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1915 		}
1916 		break;
1917 	case FC_ERROR:
1918 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1919 			   "due to FC_ERROR\n");
1920 		sc_cmd->result = DID_ERROR << 16;
1921 		break;
1922 	case FC_DATA_UNDRUN:
1923 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1924 			/*
1925 			 * scsi status is good but transport level
1926 			 * underrun.
1927 			 */
1928 			if (fsp->state & FC_SRB_RCV_STATUS) {
1929 				sc_cmd->result = DID_OK << 16;
1930 			} else {
1931 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1932 					   " due to FC_DATA_UNDRUN (trans)\n");
1933 				sc_cmd->result = DID_ERROR << 16;
1934 			}
1935 		} else {
1936 			/*
1937 			 * scsi got underrun, this is an error
1938 			 */
1939 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1940 				   "due to FC_DATA_UNDRUN (scsi)\n");
1941 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1942 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1943 		}
1944 		break;
1945 	case FC_DATA_OVRRUN:
1946 		/*
1947 		 * overrun is an error
1948 		 */
1949 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1950 			   "due to FC_DATA_OVRRUN\n");
1951 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1952 		break;
1953 	case FC_CMD_ABORTED:
1954 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1955 			   "due to FC_CMD_ABORTED\n");
1956 		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1957 		break;
1958 	case FC_CMD_RECOVERY:
1959 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1960 		break;
1961 	case FC_CMD_RESET:
1962 		sc_cmd->result = (DID_RESET << 16);
1963 		break;
1964 	case FC_HRD_ERROR:
1965 		sc_cmd->result = (DID_NO_CONNECT << 16);
1966 		break;
1967 	default:
1968 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1969 			   "due to unknown error\n");
1970 		sc_cmd->result = (DID_ERROR << 16);
1971 		break;
1972 	}
1973 
1974 	if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE) {
1975 		sc_cmd->result = (DID_REQUEUE << 16);
1976 		FC_FCP_DBG(fsp, "Returning DID_REQUEUE to scsi-ml\n");
1977 	}
1978 
1979 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1980 	list_del(&fsp->list);
1981 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1982 	sc_cmd->SCp.ptr = NULL;
1983 	sc_cmd->scsi_done(sc_cmd);
1984 
1985 	/* release ref from initial allocation in queue command */
1986 	fc_fcp_pkt_release(fsp);
1987 }
1988 
1989 /**
1990  * fc_eh_abort() - Abort a command
1991  * @sc_cmd: The SCSI command to abort
1992  *
1993  * From SCSI host template.
1994  * Send an ABTS to the target device and wait for the response.
1995  */
1996 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
1997 {
1998 	struct fc_fcp_pkt *fsp;
1999 	struct fc_lport *lport;
2000 	int rc = FAILED;
2001 	unsigned long flags;
2002 
2003 	lport = shost_priv(sc_cmd->device->host);
2004 	if (lport->state != LPORT_ST_READY)
2005 		return rc;
2006 	else if (!lport->link_up)
2007 		return rc;
2008 
2009 	spin_lock_irqsave(lport->host->host_lock, flags);
2010 	fsp = CMD_SP(sc_cmd);
2011 	if (!fsp) {
2012 		/* command completed while scsi eh was setting up */
2013 		spin_unlock_irqrestore(lport->host->host_lock, flags);
2014 		return SUCCESS;
2015 	}
2016 	/* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2017 	fc_fcp_pkt_hold(fsp);
2018 	spin_unlock_irqrestore(lport->host->host_lock, flags);
2019 
2020 	if (fc_fcp_lock_pkt(fsp)) {
2021 		/* completed while we were waiting for timer to be deleted */
2022 		rc = SUCCESS;
2023 		goto release_pkt;
2024 	}
2025 
2026 	rc = fc_fcp_pkt_abort(fsp);
2027 	fc_fcp_unlock_pkt(fsp);
2028 
2029 release_pkt:
2030 	fc_fcp_pkt_release(fsp);
2031 	return rc;
2032 }
2033 EXPORT_SYMBOL(fc_eh_abort);
2034 
2035 /**
2036  * fc_eh_device_reset() - Reset a single LUN
2037  * @sc_cmd: The SCSI command which identifies the device whose
2038  *	    LUN is to be reset
2039  *
2040  * Set from SCSI host template.
2041  */
2042 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2043 {
2044 	struct fc_lport *lport;
2045 	struct fc_fcp_pkt *fsp;
2046 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2047 	int rc = FAILED;
2048 	int rval;
2049 
2050 	rval = fc_remote_port_chkready(rport);
2051 	if (rval)
2052 		goto out;
2053 
2054 	lport = shost_priv(sc_cmd->device->host);
2055 
2056 	if (lport->state != LPORT_ST_READY)
2057 		return rc;
2058 
2059 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2060 
2061 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2062 	if (fsp == NULL) {
2063 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2064 		goto out;
2065 	}
2066 
2067 	/*
2068 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2069 	 * the sc passed in is not setup for execution like when sent
2070 	 * through the queuecommand callout.
2071 	 */
2072 	fsp->lp = lport;	/* save the softc ptr */
2073 	fsp->rport = rport;	/* set the remote port ptr */
2074 
2075 	/*
2076 	 * flush outstanding commands
2077 	 */
2078 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2079 	fsp->state = FC_SRB_FREE;
2080 	fc_fcp_pkt_release(fsp);
2081 
2082 out:
2083 	return rc;
2084 }
2085 EXPORT_SYMBOL(fc_eh_device_reset);
2086 
2087 /**
2088  * fc_eh_host_reset() - Reset a Scsi_Host.
2089  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2090  */
2091 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2092 {
2093 	struct Scsi_Host *shost = sc_cmd->device->host;
2094 	struct fc_lport *lport = shost_priv(shost);
2095 	unsigned long wait_tmo;
2096 
2097 	FC_SCSI_DBG(lport, "Resetting host\n");
2098 
2099 	lport->tt.lport_reset(lport);
2100 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2101 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2102 							       wait_tmo))
2103 		msleep(1000);
2104 
2105 	if (fc_fcp_lport_queue_ready(lport)) {
2106 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2107 			     "on port (%6.6x)\n", lport->port_id);
2108 		return SUCCESS;
2109 	} else {
2110 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2111 			     "port (%6.6x) is not ready.\n",
2112 			     lport->port_id);
2113 		return FAILED;
2114 	}
2115 }
2116 EXPORT_SYMBOL(fc_eh_host_reset);
2117 
2118 /**
2119  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2120  * @sdev: The SCSI device that identifies the SCSI host
2121  *
2122  * Configures queue depth based on host's cmd_per_len. If not set
2123  * then we use the libfc default.
2124  */
2125 int fc_slave_alloc(struct scsi_device *sdev)
2126 {
2127 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2128 
2129 	if (!rport || fc_remote_port_chkready(rport))
2130 		return -ENXIO;
2131 
2132 	if (sdev->tagged_supported)
2133 		scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2134 	else
2135 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2136 					FC_FCP_DFLT_QUEUE_DEPTH);
2137 
2138 	return 0;
2139 }
2140 EXPORT_SYMBOL(fc_slave_alloc);
2141 
2142 /**
2143  * fc_change_queue_depth() - Change a device's queue depth
2144  * @sdev:   The SCSI device whose queue depth is to change
2145  * @qdepth: The new queue depth
2146  * @reason: The resason for the change
2147  */
2148 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2149 {
2150 	switch (reason) {
2151 	case SCSI_QDEPTH_DEFAULT:
2152 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2153 		break;
2154 	case SCSI_QDEPTH_QFULL:
2155 		scsi_track_queue_full(sdev, qdepth);
2156 		break;
2157 	case SCSI_QDEPTH_RAMP_UP:
2158 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2159 		break;
2160 	default:
2161 		return -EOPNOTSUPP;
2162 	}
2163 	return sdev->queue_depth;
2164 }
2165 EXPORT_SYMBOL(fc_change_queue_depth);
2166 
2167 /**
2168  * fc_change_queue_type() - Change a device's queue type
2169  * @sdev:     The SCSI device whose queue depth is to change
2170  * @tag_type: Identifier for queue type
2171  */
2172 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2173 {
2174 	if (sdev->tagged_supported) {
2175 		scsi_set_tag_type(sdev, tag_type);
2176 		if (tag_type)
2177 			scsi_activate_tcq(sdev, sdev->queue_depth);
2178 		else
2179 			scsi_deactivate_tcq(sdev, sdev->queue_depth);
2180 	} else
2181 		tag_type = 0;
2182 
2183 	return tag_type;
2184 }
2185 EXPORT_SYMBOL(fc_change_queue_type);
2186 
2187 /**
2188  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2189  * @lport: The local port that no longer needs the FCP layer
2190  */
2191 void fc_fcp_destroy(struct fc_lport *lport)
2192 {
2193 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2194 
2195 	if (!list_empty(&si->scsi_pkt_queue))
2196 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2197 		       "port (%6.6x)\n", lport->port_id);
2198 
2199 	mempool_destroy(si->scsi_pkt_pool);
2200 	kfree(si);
2201 	lport->scsi_priv = NULL;
2202 }
2203 EXPORT_SYMBOL(fc_fcp_destroy);
2204 
2205 int fc_setup_fcp()
2206 {
2207 	int rc = 0;
2208 
2209 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2210 					    sizeof(struct fc_fcp_pkt),
2211 					    0, SLAB_HWCACHE_ALIGN, NULL);
2212 	if (!scsi_pkt_cachep) {
2213 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2214 		       "module load failed!");
2215 		rc = -ENOMEM;
2216 	}
2217 
2218 	return rc;
2219 }
2220 
2221 void fc_destroy_fcp()
2222 {
2223 	if (scsi_pkt_cachep)
2224 		kmem_cache_destroy(scsi_pkt_cachep);
2225 }
2226 
2227 /**
2228  * fc_fcp_init() - Initialize the FCP layer for a local port
2229  * @lport: The local port to initialize the exchange layer for
2230  */
2231 int fc_fcp_init(struct fc_lport *lport)
2232 {
2233 	int rc;
2234 	struct fc_fcp_internal *si;
2235 
2236 	if (!lport->tt.fcp_cmd_send)
2237 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2238 
2239 	if (!lport->tt.fcp_cleanup)
2240 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2241 
2242 	if (!lport->tt.fcp_abort_io)
2243 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2244 
2245 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2246 	if (!si)
2247 		return -ENOMEM;
2248 	lport->scsi_priv = si;
2249 	si->max_can_queue = lport->host->can_queue;
2250 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2251 	spin_lock_init(&si->scsi_queue_lock);
2252 
2253 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2254 	if (!si->scsi_pkt_pool) {
2255 		rc = -ENOMEM;
2256 		goto free_internal;
2257 	}
2258 	return 0;
2259 
2260 free_internal:
2261 	kfree(si);
2262 	return rc;
2263 }
2264 EXPORT_SYMBOL(fc_fcp_init);
2265