1 /* 2 * Copyright(c) 2007 Intel Corporation. All rights reserved. 3 * Copyright(c) 2008 Red Hat, Inc. All rights reserved. 4 * Copyright(c) 2008 Mike Christie 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms and conditions of the GNU General Public License, 8 * version 2, as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope it will be useful, but WITHOUT 11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 * more details. 14 * 15 * You should have received a copy of the GNU General Public License along with 16 * this program; if not, write to the Free Software Foundation, Inc., 17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Maintained at www.Open-FCoE.org 20 */ 21 22 #include <linux/module.h> 23 #include <linux/delay.h> 24 #include <linux/kernel.h> 25 #include <linux/types.h> 26 #include <linux/spinlock.h> 27 #include <linux/scatterlist.h> 28 #include <linux/err.h> 29 #include <linux/crc32.h> 30 #include <linux/slab.h> 31 32 #include <scsi/scsi_tcq.h> 33 #include <scsi/scsi.h> 34 #include <scsi/scsi_host.h> 35 #include <scsi/scsi_device.h> 36 #include <scsi/scsi_cmnd.h> 37 38 #include <scsi/fc/fc_fc2.h> 39 40 #include <scsi/libfc.h> 41 #include <scsi/fc_encode.h> 42 43 #include "fc_libfc.h" 44 45 static struct kmem_cache *scsi_pkt_cachep; 46 47 /* SRB state definitions */ 48 #define FC_SRB_FREE 0 /* cmd is free */ 49 #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */ 50 #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */ 51 #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */ 52 #define FC_SRB_ABORTED (1 << 3) /* abort acknowledged */ 53 #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */ 54 #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */ 55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */ 56 57 #define FC_SRB_READ (1 << 1) 58 #define FC_SRB_WRITE (1 << 0) 59 60 /* 61 * The SCp.ptr should be tested and set under the scsi_pkt_queue lock 62 */ 63 #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr) 64 #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) 65 #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual) 66 #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status) 67 #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual) 68 69 /** 70 * struct fc_fcp_internal - FCP layer internal data 71 * @scsi_pkt_pool: Memory pool to draw FCP packets from 72 * @scsi_queue_lock: Protects the scsi_pkt_queue 73 * @scsi_pkt_queue: Current FCP packets 74 * @last_can_queue_ramp_down_time: ramp down time 75 * @last_can_queue_ramp_up_time: ramp up time 76 * @max_can_queue: max can_queue size 77 */ 78 struct fc_fcp_internal { 79 mempool_t *scsi_pkt_pool; 80 spinlock_t scsi_queue_lock; 81 struct list_head scsi_pkt_queue; 82 unsigned long last_can_queue_ramp_down_time; 83 unsigned long last_can_queue_ramp_up_time; 84 int max_can_queue; 85 }; 86 87 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv) 88 89 /* 90 * function prototypes 91 * FC scsi I/O related functions 92 */ 93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *); 94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *); 95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *); 96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *); 97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *); 98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *); 99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code); 100 static void fc_fcp_timeout(unsigned long); 101 static void fc_fcp_rec(struct fc_fcp_pkt *); 102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *); 103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *); 104 static void fc_io_compl(struct fc_fcp_pkt *); 105 106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32); 107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *); 108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *); 109 110 /* 111 * command status codes 112 */ 113 #define FC_COMPLETE 0 114 #define FC_CMD_ABORTED 1 115 #define FC_CMD_RESET 2 116 #define FC_CMD_PLOGO 3 117 #define FC_SNS_RCV 4 118 #define FC_TRANS_ERR 5 119 #define FC_DATA_OVRRUN 6 120 #define FC_DATA_UNDRUN 7 121 #define FC_ERROR 8 122 #define FC_HRD_ERROR 9 123 #define FC_CRC_ERROR 10 124 #define FC_TIMED_OUT 11 125 126 /* 127 * Error recovery timeout values. 128 */ 129 #define FC_SCSI_TM_TOV (10 * HZ) 130 #define FC_HOST_RESET_TIMEOUT (30 * HZ) 131 #define FC_CAN_QUEUE_PERIOD (60 * HZ) 132 133 #define FC_MAX_ERROR_CNT 5 134 #define FC_MAX_RECOV_RETRY 3 135 136 #define FC_FCP_DFLT_QUEUE_DEPTH 32 137 138 /** 139 * fc_fcp_pkt_alloc() - Allocate a fcp_pkt 140 * @lport: The local port that the FCP packet is for 141 * @gfp: GFP flags for allocation 142 * 143 * Return value: fcp_pkt structure or null on allocation failure. 144 * Context: Can be called from process context, no lock is required. 145 */ 146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp) 147 { 148 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 149 struct fc_fcp_pkt *fsp; 150 151 fsp = mempool_alloc(si->scsi_pkt_pool, gfp); 152 if (fsp) { 153 memset(fsp, 0, sizeof(*fsp)); 154 fsp->lp = lport; 155 fsp->xfer_ddp = FC_XID_UNKNOWN; 156 atomic_set(&fsp->ref_cnt, 1); 157 init_timer(&fsp->timer); 158 INIT_LIST_HEAD(&fsp->list); 159 spin_lock_init(&fsp->scsi_pkt_lock); 160 } 161 return fsp; 162 } 163 164 /** 165 * fc_fcp_pkt_release() - Release hold on a fcp_pkt 166 * @fsp: The FCP packet to be released 167 * 168 * Context: Can be called from process or interrupt context, 169 * no lock is required. 170 */ 171 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp) 172 { 173 if (atomic_dec_and_test(&fsp->ref_cnt)) { 174 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp); 175 176 mempool_free(fsp, si->scsi_pkt_pool); 177 } 178 } 179 180 /** 181 * fc_fcp_pkt_hold() - Hold a fcp_pkt 182 * @fsp: The FCP packet to be held 183 */ 184 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp) 185 { 186 atomic_inc(&fsp->ref_cnt); 187 } 188 189 /** 190 * fc_fcp_pkt_destory() - Release hold on a fcp_pkt 191 * @seq: The sequence that the FCP packet is on (required by destructor API) 192 * @fsp: The FCP packet to be released 193 * 194 * This routine is called by a destructor callback in the exch_seq_send() 195 * routine of the libfc Transport Template. The 'struct fc_seq' is a required 196 * argument even though it is not used by this routine. 197 * 198 * Context: No locking required. 199 */ 200 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp) 201 { 202 fc_fcp_pkt_release(fsp); 203 } 204 205 /** 206 * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count 207 * @fsp: The FCP packet to be locked and incremented 208 * 209 * We should only return error if we return a command to SCSI-ml before 210 * getting a response. This can happen in cases where we send a abort, but 211 * do not wait for the response and the abort and command can be passing 212 * each other on the wire/network-layer. 213 * 214 * Note: this function locks the packet and gets a reference to allow 215 * callers to call the completion function while the lock is held and 216 * not have to worry about the packets refcount. 217 * 218 * TODO: Maybe we should just have callers grab/release the lock and 219 * have a function that they call to verify the fsp and grab a ref if 220 * needed. 221 */ 222 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp) 223 { 224 spin_lock_bh(&fsp->scsi_pkt_lock); 225 if (fsp->state & FC_SRB_COMPL) { 226 spin_unlock_bh(&fsp->scsi_pkt_lock); 227 return -EPERM; 228 } 229 230 fc_fcp_pkt_hold(fsp); 231 return 0; 232 } 233 234 /** 235 * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its 236 * reference count 237 * @fsp: The FCP packet to be unlocked and decremented 238 */ 239 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp) 240 { 241 spin_unlock_bh(&fsp->scsi_pkt_lock); 242 fc_fcp_pkt_release(fsp); 243 } 244 245 /** 246 * fc_fcp_timer_set() - Start a timer for a fcp_pkt 247 * @fsp: The FCP packet to start a timer for 248 * @delay: The timeout period in jiffies 249 */ 250 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay) 251 { 252 if (!(fsp->state & FC_SRB_COMPL)) 253 mod_timer(&fsp->timer, jiffies + delay); 254 } 255 256 /** 257 * fc_fcp_send_abort() - Send an abort for exchanges associated with a 258 * fcp_pkt 259 * @fsp: The FCP packet to abort exchanges on 260 */ 261 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp) 262 { 263 if (!fsp->seq_ptr) 264 return -EINVAL; 265 266 fsp->state |= FC_SRB_ABORT_PENDING; 267 return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0); 268 } 269 270 /** 271 * fc_fcp_retry_cmd() - Retry a fcp_pkt 272 * @fsp: The FCP packet to be retried 273 * 274 * Sets the status code to be FC_ERROR and then calls 275 * fc_fcp_complete_locked() which in turn calls fc_io_compl(). 276 * fc_io_compl() will notify the SCSI-ml that the I/O is done. 277 * The SCSI-ml will retry the command. 278 */ 279 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp) 280 { 281 if (fsp->seq_ptr) { 282 fsp->lp->tt.exch_done(fsp->seq_ptr); 283 fsp->seq_ptr = NULL; 284 } 285 286 fsp->state &= ~FC_SRB_ABORT_PENDING; 287 fsp->io_status = 0; 288 fsp->status_code = FC_ERROR; 289 fc_fcp_complete_locked(fsp); 290 } 291 292 /** 293 * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context 294 * @fsp: The FCP packet that will manage the DDP frames 295 * @xid: The XID that will be used for the DDP exchange 296 */ 297 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) 298 { 299 struct fc_lport *lport; 300 301 lport = fsp->lp; 302 if ((fsp->req_flags & FC_SRB_READ) && 303 (lport->lro_enabled) && (lport->tt.ddp_setup)) { 304 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd), 305 scsi_sg_count(fsp->cmd))) 306 fsp->xfer_ddp = xid; 307 } 308 } 309 310 /** 311 * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any 312 * DDP related resources for a fcp_pkt 313 * @fsp: The FCP packet that DDP had been used on 314 */ 315 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) 316 { 317 struct fc_lport *lport; 318 319 if (!fsp) 320 return; 321 322 if (fsp->xfer_ddp == FC_XID_UNKNOWN) 323 return; 324 325 lport = fsp->lp; 326 if (lport->tt.ddp_done) { 327 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp); 328 fsp->xfer_ddp = FC_XID_UNKNOWN; 329 } 330 } 331 332 /** 333 * fc_fcp_can_queue_ramp_up() - increases can_queue 334 * @lport: lport to ramp up can_queue 335 */ 336 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport) 337 { 338 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 339 unsigned long flags; 340 int can_queue; 341 342 spin_lock_irqsave(lport->host->host_lock, flags); 343 344 if (si->last_can_queue_ramp_up_time && 345 (time_before(jiffies, si->last_can_queue_ramp_up_time + 346 FC_CAN_QUEUE_PERIOD))) 347 goto unlock; 348 349 if (time_before(jiffies, si->last_can_queue_ramp_down_time + 350 FC_CAN_QUEUE_PERIOD)) 351 goto unlock; 352 353 si->last_can_queue_ramp_up_time = jiffies; 354 355 can_queue = lport->host->can_queue << 1; 356 if (can_queue >= si->max_can_queue) { 357 can_queue = si->max_can_queue; 358 si->last_can_queue_ramp_down_time = 0; 359 } 360 lport->host->can_queue = can_queue; 361 shost_printk(KERN_ERR, lport->host, "libfc: increased " 362 "can_queue to %d.\n", can_queue); 363 364 unlock: 365 spin_unlock_irqrestore(lport->host->host_lock, flags); 366 } 367 368 /** 369 * fc_fcp_can_queue_ramp_down() - reduces can_queue 370 * @lport: lport to reduce can_queue 371 * 372 * If we are getting memory allocation failures, then we may 373 * be trying to execute too many commands. We let the running 374 * commands complete or timeout, then try again with a reduced 375 * can_queue. Eventually we will hit the point where we run 376 * on all reserved structs. 377 */ 378 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport) 379 { 380 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 381 unsigned long flags; 382 int can_queue; 383 384 spin_lock_irqsave(lport->host->host_lock, flags); 385 386 if (si->last_can_queue_ramp_down_time && 387 (time_before(jiffies, si->last_can_queue_ramp_down_time + 388 FC_CAN_QUEUE_PERIOD))) 389 goto unlock; 390 391 si->last_can_queue_ramp_down_time = jiffies; 392 393 can_queue = lport->host->can_queue; 394 can_queue >>= 1; 395 if (!can_queue) 396 can_queue = 1; 397 lport->host->can_queue = can_queue; 398 shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n" 399 "Reducing can_queue to %d.\n", can_queue); 400 401 unlock: 402 spin_unlock_irqrestore(lport->host->host_lock, flags); 403 } 404 405 /* 406 * fc_fcp_frame_alloc() - Allocates fc_frame structure and buffer. 407 * @lport: fc lport struct 408 * @len: payload length 409 * 410 * Allocates fc_frame structure and buffer but if fails to allocate 411 * then reduce can_queue. 412 */ 413 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport, 414 size_t len) 415 { 416 struct fc_frame *fp; 417 418 fp = fc_frame_alloc(lport, len); 419 if (likely(fp)) 420 return fp; 421 422 /* error case */ 423 fc_fcp_can_queue_ramp_down(lport); 424 return NULL; 425 } 426 427 /** 428 * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target 429 * @fsp: The FCP packet the data is on 430 * @fp: The data frame 431 */ 432 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 433 { 434 struct scsi_cmnd *sc = fsp->cmd; 435 struct fc_lport *lport = fsp->lp; 436 struct fcoe_dev_stats *stats; 437 struct fc_frame_header *fh; 438 size_t start_offset; 439 size_t offset; 440 u32 crc; 441 u32 copy_len = 0; 442 size_t len; 443 void *buf; 444 struct scatterlist *sg; 445 u32 nents; 446 u8 host_bcode = FC_COMPLETE; 447 448 fh = fc_frame_header_get(fp); 449 offset = ntohl(fh->fh_parm_offset); 450 start_offset = offset; 451 len = fr_len(fp) - sizeof(*fh); 452 buf = fc_frame_payload_get(fp, 0); 453 454 /* 455 * if this I/O is ddped then clear it and initiate recovery since data 456 * frames are expected to be placed directly in that case. 457 * 458 * Indicate error to scsi-ml because something went wrong with the 459 * ddp handling to get us here. 460 */ 461 if (fsp->xfer_ddp != FC_XID_UNKNOWN) { 462 fc_fcp_ddp_done(fsp); 463 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n"); 464 host_bcode = FC_ERROR; 465 goto err; 466 } 467 if (offset + len > fsp->data_len) { 468 /* this should never happen */ 469 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && 470 fc_frame_crc_check(fp)) 471 goto crc_err; 472 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx " 473 "data_len %x\n", len, offset, fsp->data_len); 474 475 /* Data is corrupted indicate scsi-ml should retry */ 476 host_bcode = FC_DATA_OVRRUN; 477 goto err; 478 } 479 if (offset != fsp->xfer_len) 480 fsp->state |= FC_SRB_DISCONTIG; 481 482 sg = scsi_sglist(sc); 483 nents = scsi_sg_count(sc); 484 485 if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) { 486 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents, 487 &offset, KM_SOFTIRQ0, NULL); 488 } else { 489 crc = crc32(~0, (u8 *) fh, sizeof(*fh)); 490 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents, 491 &offset, KM_SOFTIRQ0, &crc); 492 buf = fc_frame_payload_get(fp, 0); 493 if (len % 4) 494 crc = crc32(crc, buf + len, 4 - (len % 4)); 495 496 if (~crc != le32_to_cpu(fr_crc(fp))) { 497 crc_err: 498 stats = per_cpu_ptr(lport->dev_stats, get_cpu()); 499 stats->ErrorFrames++; 500 /* per cpu count, not total count, but OK for limit */ 501 if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT) 502 printk(KERN_WARNING "libfc: CRC error on data " 503 "frame for port (%6.6x)\n", 504 lport->port_id); 505 put_cpu(); 506 /* 507 * Assume the frame is total garbage. 508 * We may have copied it over the good part 509 * of the buffer. 510 * If so, we need to retry the entire operation. 511 * Otherwise, ignore it. 512 */ 513 if (fsp->state & FC_SRB_DISCONTIG) { 514 host_bcode = FC_CRC_ERROR; 515 goto err; 516 } 517 return; 518 } 519 } 520 521 if (fsp->xfer_contig_end == start_offset) 522 fsp->xfer_contig_end += copy_len; 523 fsp->xfer_len += copy_len; 524 525 /* 526 * In the very rare event that this data arrived after the response 527 * and completes the transfer, call the completion handler. 528 */ 529 if (unlikely(fsp->state & FC_SRB_RCV_STATUS) && 530 fsp->xfer_len == fsp->data_len - fsp->scsi_resid) 531 fc_fcp_complete_locked(fsp); 532 return; 533 err: 534 fc_fcp_recovery(fsp, host_bcode); 535 } 536 537 /** 538 * fc_fcp_send_data() - Send SCSI data to a target 539 * @fsp: The FCP packet the data is on 540 * @sp: The sequence the data is to be sent on 541 * @offset: The starting offset for this data request 542 * @seq_blen: The burst length for this data request 543 * 544 * Called after receiving a Transfer Ready data descriptor. 545 * If the LLD is capable of sequence offload then send down the 546 * seq_blen amount of data in single frame, otherwise send 547 * multiple frames of the maximum frame payload supported by 548 * the target port. 549 */ 550 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq, 551 size_t offset, size_t seq_blen) 552 { 553 struct fc_exch *ep; 554 struct scsi_cmnd *sc; 555 struct scatterlist *sg; 556 struct fc_frame *fp = NULL; 557 struct fc_lport *lport = fsp->lp; 558 struct page *page; 559 size_t remaining; 560 size_t t_blen; 561 size_t tlen; 562 size_t sg_bytes; 563 size_t frame_offset, fh_parm_offset; 564 size_t off; 565 int error; 566 void *data = NULL; 567 void *page_addr; 568 int using_sg = lport->sg_supp; 569 u32 f_ctl; 570 571 WARN_ON(seq_blen <= 0); 572 if (unlikely(offset + seq_blen > fsp->data_len)) { 573 /* this should never happen */ 574 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx " 575 "offset %zx\n", seq_blen, offset); 576 fc_fcp_send_abort(fsp); 577 return 0; 578 } else if (offset != fsp->xfer_len) { 579 /* Out of Order Data Request - no problem, but unexpected. */ 580 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. " 581 "seq_blen %zx offset %zx\n", seq_blen, offset); 582 } 583 584 /* 585 * if LLD is capable of seq_offload then set transport 586 * burst length (t_blen) to seq_blen, otherwise set t_blen 587 * to max FC frame payload previously set in fsp->max_payload. 588 */ 589 t_blen = fsp->max_payload; 590 if (lport->seq_offload) { 591 t_blen = min(seq_blen, (size_t)lport->lso_max); 592 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n", 593 fsp, seq_blen, lport->lso_max, t_blen); 594 } 595 596 if (t_blen > 512) 597 t_blen &= ~(512 - 1); /* round down to block size */ 598 sc = fsp->cmd; 599 600 remaining = seq_blen; 601 fh_parm_offset = frame_offset = offset; 602 tlen = 0; 603 seq = lport->tt.seq_start_next(seq); 604 f_ctl = FC_FC_REL_OFF; 605 WARN_ON(!seq); 606 607 sg = scsi_sglist(sc); 608 609 while (remaining > 0 && sg) { 610 if (offset >= sg->length) { 611 offset -= sg->length; 612 sg = sg_next(sg); 613 continue; 614 } 615 if (!fp) { 616 tlen = min(t_blen, remaining); 617 618 /* 619 * TODO. Temporary workaround. fc_seq_send() can't 620 * handle odd lengths in non-linear skbs. 621 * This will be the final fragment only. 622 */ 623 if (tlen % 4) 624 using_sg = 0; 625 fp = fc_frame_alloc(lport, using_sg ? 0 : tlen); 626 if (!fp) 627 return -ENOMEM; 628 629 data = fc_frame_header_get(fp) + 1; 630 fh_parm_offset = frame_offset; 631 fr_max_payload(fp) = fsp->max_payload; 632 } 633 634 off = offset + sg->offset; 635 sg_bytes = min(tlen, sg->length - offset); 636 sg_bytes = min(sg_bytes, 637 (size_t) (PAGE_SIZE - (off & ~PAGE_MASK))); 638 page = sg_page(sg) + (off >> PAGE_SHIFT); 639 if (using_sg) { 640 get_page(page); 641 skb_fill_page_desc(fp_skb(fp), 642 skb_shinfo(fp_skb(fp))->nr_frags, 643 page, off & ~PAGE_MASK, sg_bytes); 644 fp_skb(fp)->data_len += sg_bytes; 645 fr_len(fp) += sg_bytes; 646 fp_skb(fp)->truesize += PAGE_SIZE; 647 } else { 648 /* 649 * The scatterlist item may be bigger than PAGE_SIZE, 650 * but we must not cross pages inside the kmap. 651 */ 652 page_addr = kmap_atomic(page, KM_SOFTIRQ0); 653 memcpy(data, (char *)page_addr + (off & ~PAGE_MASK), 654 sg_bytes); 655 kunmap_atomic(page_addr, KM_SOFTIRQ0); 656 data += sg_bytes; 657 } 658 offset += sg_bytes; 659 frame_offset += sg_bytes; 660 tlen -= sg_bytes; 661 remaining -= sg_bytes; 662 663 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) && 664 (tlen)) 665 continue; 666 667 /* 668 * Send sequence with transfer sequence initiative in case 669 * this is last FCP frame of the sequence. 670 */ 671 if (remaining == 0) 672 f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ; 673 674 ep = fc_seq_exch(seq); 675 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid, 676 FC_TYPE_FCP, f_ctl, fh_parm_offset); 677 678 /* 679 * send fragment using for a sequence. 680 */ 681 error = lport->tt.seq_send(lport, seq, fp); 682 if (error) { 683 WARN_ON(1); /* send error should be rare */ 684 return error; 685 } 686 fp = NULL; 687 } 688 fsp->xfer_len += seq_blen; /* premature count? */ 689 return 0; 690 } 691 692 /** 693 * fc_fcp_abts_resp() - Receive an ABTS response 694 * @fsp: The FCP packet that is being aborted 695 * @fp: The response frame 696 */ 697 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 698 { 699 int ba_done = 1; 700 struct fc_ba_rjt *brp; 701 struct fc_frame_header *fh; 702 703 fh = fc_frame_header_get(fp); 704 switch (fh->fh_r_ctl) { 705 case FC_RCTL_BA_ACC: 706 break; 707 case FC_RCTL_BA_RJT: 708 brp = fc_frame_payload_get(fp, sizeof(*brp)); 709 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR) 710 break; 711 /* fall thru */ 712 default: 713 /* 714 * we will let the command timeout 715 * and scsi-ml recover in this case, 716 * therefore cleared the ba_done flag. 717 */ 718 ba_done = 0; 719 } 720 721 if (ba_done) { 722 fsp->state |= FC_SRB_ABORTED; 723 fsp->state &= ~FC_SRB_ABORT_PENDING; 724 725 if (fsp->wait_for_comp) 726 complete(&fsp->tm_done); 727 else 728 fc_fcp_complete_locked(fsp); 729 } 730 } 731 732 /** 733 * fc_fcp_recv() - Receive an FCP frame 734 * @seq: The sequence the frame is on 735 * @fp: The received frame 736 * @arg: The related FCP packet 737 * 738 * Context: Called from Soft IRQ context. Can not be called 739 * holding the FCP packet list lock. 740 */ 741 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) 742 { 743 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; 744 struct fc_lport *lport = fsp->lp; 745 struct fc_frame_header *fh; 746 struct fcp_txrdy *dd; 747 u8 r_ctl; 748 int rc = 0; 749 750 if (IS_ERR(fp)) { 751 fc_fcp_error(fsp, fp); 752 return; 753 } 754 755 fh = fc_frame_header_get(fp); 756 r_ctl = fh->fh_r_ctl; 757 758 if (lport->state != LPORT_ST_READY) 759 goto out; 760 if (fc_fcp_lock_pkt(fsp)) 761 goto out; 762 763 if (fh->fh_type == FC_TYPE_BLS) { 764 fc_fcp_abts_resp(fsp, fp); 765 goto unlock; 766 } 767 768 if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) 769 goto unlock; 770 771 if (r_ctl == FC_RCTL_DD_DATA_DESC) { 772 /* 773 * received XFER RDY from the target 774 * need to send data to the target 775 */ 776 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED); 777 dd = fc_frame_payload_get(fp, sizeof(*dd)); 778 WARN_ON(!dd); 779 780 rc = fc_fcp_send_data(fsp, seq, 781 (size_t) ntohl(dd->ft_data_ro), 782 (size_t) ntohl(dd->ft_burst_len)); 783 if (!rc) 784 seq->rec_data = fsp->xfer_len; 785 } else if (r_ctl == FC_RCTL_DD_SOL_DATA) { 786 /* 787 * received a DATA frame 788 * next we will copy the data to the system buffer 789 */ 790 WARN_ON(fr_len(fp) < sizeof(*fh)); /* len may be 0 */ 791 fc_fcp_recv_data(fsp, fp); 792 seq->rec_data = fsp->xfer_contig_end; 793 } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) { 794 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED); 795 796 fc_fcp_resp(fsp, fp); 797 } else { 798 FC_FCP_DBG(fsp, "unexpected frame. r_ctl %x\n", r_ctl); 799 } 800 unlock: 801 fc_fcp_unlock_pkt(fsp); 802 out: 803 fc_frame_free(fp); 804 } 805 806 /** 807 * fc_fcp_resp() - Handler for FCP responses 808 * @fsp: The FCP packet the response is for 809 * @fp: The response frame 810 */ 811 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 812 { 813 struct fc_frame_header *fh; 814 struct fcp_resp *fc_rp; 815 struct fcp_resp_ext *rp_ex; 816 struct fcp_resp_rsp_info *fc_rp_info; 817 u32 plen; 818 u32 expected_len; 819 u32 respl = 0; 820 u32 snsl = 0; 821 u8 flags = 0; 822 823 plen = fr_len(fp); 824 fh = (struct fc_frame_header *)fr_hdr(fp); 825 if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp))) 826 goto len_err; 827 plen -= sizeof(*fh); 828 fc_rp = (struct fcp_resp *)(fh + 1); 829 fsp->cdb_status = fc_rp->fr_status; 830 flags = fc_rp->fr_flags; 831 fsp->scsi_comp_flags = flags; 832 expected_len = fsp->data_len; 833 834 /* if ddp, update xfer len */ 835 fc_fcp_ddp_done(fsp); 836 837 if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) { 838 rp_ex = (void *)(fc_rp + 1); 839 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) { 840 if (plen < sizeof(*fc_rp) + sizeof(*rp_ex)) 841 goto len_err; 842 fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1); 843 if (flags & FCP_RSP_LEN_VAL) { 844 respl = ntohl(rp_ex->fr_rsp_len); 845 if (respl != sizeof(*fc_rp_info)) 846 goto len_err; 847 if (fsp->wait_for_comp) { 848 /* Abuse cdb_status for rsp code */ 849 fsp->cdb_status = fc_rp_info->rsp_code; 850 complete(&fsp->tm_done); 851 /* 852 * tmfs will not have any scsi cmd so 853 * exit here 854 */ 855 return; 856 } 857 } 858 if (flags & FCP_SNS_LEN_VAL) { 859 snsl = ntohl(rp_ex->fr_sns_len); 860 if (snsl > SCSI_SENSE_BUFFERSIZE) 861 snsl = SCSI_SENSE_BUFFERSIZE; 862 memcpy(fsp->cmd->sense_buffer, 863 (char *)fc_rp_info + respl, snsl); 864 } 865 } 866 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) { 867 if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid)) 868 goto len_err; 869 if (flags & FCP_RESID_UNDER) { 870 fsp->scsi_resid = ntohl(rp_ex->fr_resid); 871 /* 872 * The cmnd->underflow is the minimum number of 873 * bytes that must be transferred for this 874 * command. Provided a sense condition is not 875 * present, make sure the actual amount 876 * transferred is at least the underflow value 877 * or fail. 878 */ 879 if (!(flags & FCP_SNS_LEN_VAL) && 880 (fc_rp->fr_status == 0) && 881 (scsi_bufflen(fsp->cmd) - 882 fsp->scsi_resid) < fsp->cmd->underflow) 883 goto err; 884 expected_len -= fsp->scsi_resid; 885 } else { 886 fsp->status_code = FC_ERROR; 887 } 888 } 889 } 890 fsp->state |= FC_SRB_RCV_STATUS; 891 892 /* 893 * Check for missing or extra data frames. 894 */ 895 if (unlikely(fsp->xfer_len != expected_len)) { 896 if (fsp->xfer_len < expected_len) { 897 /* 898 * Some data may be queued locally, 899 * Wait a at least one jiffy to see if it is delivered. 900 * If this expires without data, we may do SRR. 901 */ 902 fc_fcp_timer_set(fsp, 2); 903 return; 904 } 905 fsp->status_code = FC_DATA_OVRRUN; 906 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, " 907 "len %x, data len %x\n", 908 fsp->rport->port_id, 909 fsp->xfer_len, expected_len, fsp->data_len); 910 } 911 fc_fcp_complete_locked(fsp); 912 return; 913 914 len_err: 915 FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u " 916 "snsl %u\n", flags, fr_len(fp), respl, snsl); 917 err: 918 fsp->status_code = FC_ERROR; 919 fc_fcp_complete_locked(fsp); 920 } 921 922 /** 923 * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the 924 * fcp_pkt lock held 925 * @fsp: The FCP packet to be completed 926 * 927 * This function may sleep if a timer is pending. The packet lock must be 928 * held, and the host lock must not be held. 929 */ 930 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp) 931 { 932 struct fc_lport *lport = fsp->lp; 933 struct fc_seq *seq; 934 struct fc_exch *ep; 935 u32 f_ctl; 936 937 if (fsp->state & FC_SRB_ABORT_PENDING) 938 return; 939 940 if (fsp->state & FC_SRB_ABORTED) { 941 if (!fsp->status_code) 942 fsp->status_code = FC_CMD_ABORTED; 943 } else { 944 /* 945 * Test for transport underrun, independent of response 946 * underrun status. 947 */ 948 if (fsp->xfer_len < fsp->data_len && !fsp->io_status && 949 (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) || 950 fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) { 951 fsp->status_code = FC_DATA_UNDRUN; 952 fsp->io_status = 0; 953 } 954 } 955 956 seq = fsp->seq_ptr; 957 if (seq) { 958 fsp->seq_ptr = NULL; 959 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) { 960 struct fc_frame *conf_frame; 961 struct fc_seq *csp; 962 963 csp = lport->tt.seq_start_next(seq); 964 conf_frame = fc_fcp_frame_alloc(fsp->lp, 0); 965 if (conf_frame) { 966 f_ctl = FC_FC_SEQ_INIT; 967 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ; 968 ep = fc_seq_exch(seq); 969 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL, 970 ep->did, ep->sid, 971 FC_TYPE_FCP, f_ctl, 0); 972 lport->tt.seq_send(lport, csp, conf_frame); 973 } 974 } 975 lport->tt.exch_done(seq); 976 } 977 /* 978 * Some resets driven by SCSI are not I/Os and do not have 979 * SCSI commands associated with the requests. We should not 980 * call I/O completion if we do not have a SCSI command. 981 */ 982 if (fsp->cmd) 983 fc_io_compl(fsp); 984 } 985 986 /** 987 * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt 988 * @fsp: The FCP packet whose exchanges should be canceled 989 * @error: The reason for the cancellation 990 */ 991 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error) 992 { 993 struct fc_lport *lport = fsp->lp; 994 995 if (fsp->seq_ptr) { 996 lport->tt.exch_done(fsp->seq_ptr); 997 fsp->seq_ptr = NULL; 998 } 999 fsp->status_code = error; 1000 } 1001 1002 /** 1003 * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port 1004 * @lport: The local port whose exchanges should be canceled 1005 * @id: The target's ID 1006 * @lun: The LUN 1007 * @error: The reason for cancellation 1008 * 1009 * If lun or id is -1, they are ignored. 1010 */ 1011 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id, 1012 unsigned int lun, int error) 1013 { 1014 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 1015 struct fc_fcp_pkt *fsp; 1016 struct scsi_cmnd *sc_cmd; 1017 unsigned long flags; 1018 1019 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1020 restart: 1021 list_for_each_entry(fsp, &si->scsi_pkt_queue, list) { 1022 sc_cmd = fsp->cmd; 1023 if (id != -1 && scmd_id(sc_cmd) != id) 1024 continue; 1025 1026 if (lun != -1 && sc_cmd->device->lun != lun) 1027 continue; 1028 1029 fc_fcp_pkt_hold(fsp); 1030 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1031 1032 if (!fc_fcp_lock_pkt(fsp)) { 1033 fc_fcp_cleanup_cmd(fsp, error); 1034 fc_io_compl(fsp); 1035 fc_fcp_unlock_pkt(fsp); 1036 } 1037 1038 fc_fcp_pkt_release(fsp); 1039 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1040 /* 1041 * while we dropped the lock multiple pkts could 1042 * have been released, so we have to start over. 1043 */ 1044 goto restart; 1045 } 1046 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1047 } 1048 1049 /** 1050 * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port 1051 * @lport: The local port whose exchanges are to be aborted 1052 */ 1053 static void fc_fcp_abort_io(struct fc_lport *lport) 1054 { 1055 fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR); 1056 } 1057 1058 /** 1059 * fc_fcp_pkt_send() - Send a fcp_pkt 1060 * @lport: The local port to send the FCP packet on 1061 * @fsp: The FCP packet to send 1062 * 1063 * Return: Zero for success and -1 for failure 1064 * Locks: Called without locks held 1065 */ 1066 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp) 1067 { 1068 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 1069 unsigned long flags; 1070 int rc; 1071 1072 fsp->cmd->SCp.ptr = (char *)fsp; 1073 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len); 1074 fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK; 1075 1076 int_to_scsilun(fsp->cmd->device->lun, 1077 (struct scsi_lun *)fsp->cdb_cmd.fc_lun); 1078 memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len); 1079 1080 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1081 list_add_tail(&fsp->list, &si->scsi_pkt_queue); 1082 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1083 rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv); 1084 if (unlikely(rc)) { 1085 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1086 fsp->cmd->SCp.ptr = NULL; 1087 list_del(&fsp->list); 1088 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1089 } 1090 1091 return rc; 1092 } 1093 1094 /** 1095 * get_fsp_rec_tov() - Helper function to get REC_TOV 1096 * @fsp: the FCP packet 1097 * 1098 * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second 1099 */ 1100 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp) 1101 { 1102 struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data; 1103 1104 return msecs_to_jiffies(rpriv->e_d_tov) + HZ; 1105 } 1106 1107 /** 1108 * fc_fcp_cmd_send() - Send a FCP command 1109 * @lport: The local port to send the command on 1110 * @fsp: The FCP packet the command is on 1111 * @resp: The handler for the response 1112 */ 1113 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp, 1114 void (*resp)(struct fc_seq *, 1115 struct fc_frame *fp, 1116 void *arg)) 1117 { 1118 struct fc_frame *fp; 1119 struct fc_seq *seq; 1120 struct fc_rport *rport; 1121 struct fc_rport_libfc_priv *rpriv; 1122 const size_t len = sizeof(fsp->cdb_cmd); 1123 int rc = 0; 1124 1125 if (fc_fcp_lock_pkt(fsp)) 1126 return 0; 1127 1128 fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd)); 1129 if (!fp) { 1130 rc = -1; 1131 goto unlock; 1132 } 1133 1134 memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len); 1135 fr_fsp(fp) = fsp; 1136 rport = fsp->rport; 1137 fsp->max_payload = rport->maxframe_size; 1138 rpriv = rport->dd_data; 1139 1140 fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id, 1141 rpriv->local_port->port_id, FC_TYPE_FCP, 1142 FC_FCTL_REQ, 0); 1143 1144 seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, 1145 fsp, 0); 1146 if (!seq) { 1147 rc = -1; 1148 goto unlock; 1149 } 1150 fsp->seq_ptr = seq; 1151 fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */ 1152 1153 setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp); 1154 if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED) 1155 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp)); 1156 1157 unlock: 1158 fc_fcp_unlock_pkt(fsp); 1159 return rc; 1160 } 1161 1162 /** 1163 * fc_fcp_error() - Handler for FCP layer errors 1164 * @fsp: The FCP packet the error is on 1165 * @fp: The frame that has errored 1166 */ 1167 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 1168 { 1169 int error = PTR_ERR(fp); 1170 1171 if (fc_fcp_lock_pkt(fsp)) 1172 return; 1173 1174 if (error == -FC_EX_CLOSED) { 1175 fc_fcp_retry_cmd(fsp); 1176 goto unlock; 1177 } 1178 1179 /* 1180 * clear abort pending, because the lower layer 1181 * decided to force completion. 1182 */ 1183 fsp->state &= ~FC_SRB_ABORT_PENDING; 1184 fsp->status_code = FC_CMD_PLOGO; 1185 fc_fcp_complete_locked(fsp); 1186 unlock: 1187 fc_fcp_unlock_pkt(fsp); 1188 } 1189 1190 /** 1191 * fc_fcp_pkt_abort() - Abort a fcp_pkt 1192 * @fsp: The FCP packet to abort on 1193 * 1194 * Called to send an abort and then wait for abort completion 1195 */ 1196 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp) 1197 { 1198 int rc = FAILED; 1199 unsigned long ticks_left; 1200 1201 if (fc_fcp_send_abort(fsp)) 1202 return FAILED; 1203 1204 init_completion(&fsp->tm_done); 1205 fsp->wait_for_comp = 1; 1206 1207 spin_unlock_bh(&fsp->scsi_pkt_lock); 1208 ticks_left = wait_for_completion_timeout(&fsp->tm_done, 1209 FC_SCSI_TM_TOV); 1210 spin_lock_bh(&fsp->scsi_pkt_lock); 1211 fsp->wait_for_comp = 0; 1212 1213 if (!ticks_left) { 1214 FC_FCP_DBG(fsp, "target abort cmd failed\n"); 1215 } else if (fsp->state & FC_SRB_ABORTED) { 1216 FC_FCP_DBG(fsp, "target abort cmd passed\n"); 1217 rc = SUCCESS; 1218 fc_fcp_complete_locked(fsp); 1219 } 1220 1221 return rc; 1222 } 1223 1224 /** 1225 * fc_lun_reset_send() - Send LUN reset command 1226 * @data: The FCP packet that identifies the LUN to be reset 1227 */ 1228 static void fc_lun_reset_send(unsigned long data) 1229 { 1230 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data; 1231 struct fc_lport *lport = fsp->lp; 1232 1233 if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) { 1234 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY) 1235 return; 1236 if (fc_fcp_lock_pkt(fsp)) 1237 return; 1238 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp); 1239 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp)); 1240 fc_fcp_unlock_pkt(fsp); 1241 } 1242 } 1243 1244 /** 1245 * fc_lun_reset() - Send a LUN RESET command to a device 1246 * and wait for the reply 1247 * @lport: The local port to sent the command on 1248 * @fsp: The FCP packet that identifies the LUN to be reset 1249 * @id: The SCSI command ID 1250 * @lun: The LUN ID to be reset 1251 */ 1252 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp, 1253 unsigned int id, unsigned int lun) 1254 { 1255 int rc; 1256 1257 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len); 1258 fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET; 1259 int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun); 1260 1261 fsp->wait_for_comp = 1; 1262 init_completion(&fsp->tm_done); 1263 1264 fc_lun_reset_send((unsigned long)fsp); 1265 1266 /* 1267 * wait for completion of reset 1268 * after that make sure all commands are terminated 1269 */ 1270 rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV); 1271 1272 spin_lock_bh(&fsp->scsi_pkt_lock); 1273 fsp->state |= FC_SRB_COMPL; 1274 spin_unlock_bh(&fsp->scsi_pkt_lock); 1275 1276 del_timer_sync(&fsp->timer); 1277 1278 spin_lock_bh(&fsp->scsi_pkt_lock); 1279 if (fsp->seq_ptr) { 1280 lport->tt.exch_done(fsp->seq_ptr); 1281 fsp->seq_ptr = NULL; 1282 } 1283 fsp->wait_for_comp = 0; 1284 spin_unlock_bh(&fsp->scsi_pkt_lock); 1285 1286 if (!rc) { 1287 FC_SCSI_DBG(lport, "lun reset failed\n"); 1288 return FAILED; 1289 } 1290 1291 /* cdb_status holds the tmf's rsp code */ 1292 if (fsp->cdb_status != FCP_TMF_CMPL) 1293 return FAILED; 1294 1295 FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun); 1296 fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED); 1297 return SUCCESS; 1298 } 1299 1300 /** 1301 * fc_tm_done() - Task Management response handler 1302 * @seq: The sequence that the response is on 1303 * @fp: The response frame 1304 * @arg: The FCP packet the response is for 1305 */ 1306 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg) 1307 { 1308 struct fc_fcp_pkt *fsp = arg; 1309 struct fc_frame_header *fh; 1310 1311 if (IS_ERR(fp)) { 1312 /* 1313 * If there is an error just let it timeout or wait 1314 * for TMF to be aborted if it timedout. 1315 * 1316 * scsi-eh will escalate for when either happens. 1317 */ 1318 return; 1319 } 1320 1321 if (fc_fcp_lock_pkt(fsp)) 1322 goto out; 1323 1324 /* 1325 * raced with eh timeout handler. 1326 */ 1327 if (!fsp->seq_ptr || !fsp->wait_for_comp) 1328 goto out_unlock; 1329 1330 fh = fc_frame_header_get(fp); 1331 if (fh->fh_type != FC_TYPE_BLS) 1332 fc_fcp_resp(fsp, fp); 1333 fsp->seq_ptr = NULL; 1334 fsp->lp->tt.exch_done(seq); 1335 out_unlock: 1336 fc_fcp_unlock_pkt(fsp); 1337 out: 1338 fc_frame_free(fp); 1339 } 1340 1341 /** 1342 * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port 1343 * @lport: The local port to be cleaned up 1344 */ 1345 static void fc_fcp_cleanup(struct fc_lport *lport) 1346 { 1347 fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR); 1348 } 1349 1350 /** 1351 * fc_fcp_timeout() - Handler for fcp_pkt timeouts 1352 * @data: The FCP packet that has timed out 1353 * 1354 * If REC is supported then just issue it and return. The REC exchange will 1355 * complete or time out and recovery can continue at that point. Otherwise, 1356 * if the response has been received without all the data it has been 1357 * ER_TIMEOUT since the response was received. If the response has not been 1358 * received we see if data was received recently. If it has been then we 1359 * continue waiting, otherwise, we abort the command. 1360 */ 1361 static void fc_fcp_timeout(unsigned long data) 1362 { 1363 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data; 1364 struct fc_rport *rport = fsp->rport; 1365 struct fc_rport_libfc_priv *rpriv = rport->dd_data; 1366 1367 if (fc_fcp_lock_pkt(fsp)) 1368 return; 1369 1370 if (fsp->cdb_cmd.fc_tm_flags) 1371 goto unlock; 1372 1373 fsp->state |= FC_SRB_FCP_PROCESSING_TMO; 1374 1375 if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED) 1376 fc_fcp_rec(fsp); 1377 else if (fsp->state & FC_SRB_RCV_STATUS) 1378 fc_fcp_complete_locked(fsp); 1379 else 1380 fc_fcp_recovery(fsp, FC_TIMED_OUT); 1381 fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO; 1382 unlock: 1383 fc_fcp_unlock_pkt(fsp); 1384 } 1385 1386 /** 1387 * fc_fcp_rec() - Send a REC ELS request 1388 * @fsp: The FCP packet to send the REC request on 1389 */ 1390 static void fc_fcp_rec(struct fc_fcp_pkt *fsp) 1391 { 1392 struct fc_lport *lport; 1393 struct fc_frame *fp; 1394 struct fc_rport *rport; 1395 struct fc_rport_libfc_priv *rpriv; 1396 1397 lport = fsp->lp; 1398 rport = fsp->rport; 1399 rpriv = rport->dd_data; 1400 if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) { 1401 fsp->status_code = FC_HRD_ERROR; 1402 fsp->io_status = 0; 1403 fc_fcp_complete_locked(fsp); 1404 return; 1405 } 1406 1407 fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec)); 1408 if (!fp) 1409 goto retry; 1410 1411 fr_seq(fp) = fsp->seq_ptr; 1412 fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id, 1413 rpriv->local_port->port_id, FC_TYPE_ELS, 1414 FC_FCTL_REQ, 0); 1415 if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC, 1416 fc_fcp_rec_resp, fsp, 1417 2 * lport->r_a_tov)) { 1418 fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */ 1419 return; 1420 } 1421 retry: 1422 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) 1423 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp)); 1424 else 1425 fc_fcp_recovery(fsp, FC_TIMED_OUT); 1426 } 1427 1428 /** 1429 * fc_fcp_rec_resp() - Handler for REC ELS responses 1430 * @seq: The sequence the response is on 1431 * @fp: The response frame 1432 * @arg: The FCP packet the response is on 1433 * 1434 * If the response is a reject then the scsi layer will handle 1435 * the timeout. If the response is a LS_ACC then if the I/O was not completed 1436 * set the timeout and return. If the I/O was completed then complete the 1437 * exchange and tell the SCSI layer. 1438 */ 1439 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) 1440 { 1441 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; 1442 struct fc_els_rec_acc *recp; 1443 struct fc_els_ls_rjt *rjt; 1444 u32 e_stat; 1445 u8 opcode; 1446 u32 offset; 1447 enum dma_data_direction data_dir; 1448 enum fc_rctl r_ctl; 1449 struct fc_rport_libfc_priv *rpriv; 1450 1451 if (IS_ERR(fp)) { 1452 fc_fcp_rec_error(fsp, fp); 1453 return; 1454 } 1455 1456 if (fc_fcp_lock_pkt(fsp)) 1457 goto out; 1458 1459 fsp->recov_retry = 0; 1460 opcode = fc_frame_payload_op(fp); 1461 if (opcode == ELS_LS_RJT) { 1462 rjt = fc_frame_payload_get(fp, sizeof(*rjt)); 1463 switch (rjt->er_reason) { 1464 default: 1465 FC_FCP_DBG(fsp, "device %x unexpected REC reject " 1466 "reason %d expl %d\n", 1467 fsp->rport->port_id, rjt->er_reason, 1468 rjt->er_explan); 1469 /* fall through */ 1470 case ELS_RJT_UNSUP: 1471 FC_FCP_DBG(fsp, "device does not support REC\n"); 1472 rpriv = fsp->rport->dd_data; 1473 /* 1474 * if we do not spport RECs or got some bogus 1475 * reason then resetup timer so we check for 1476 * making progress. 1477 */ 1478 rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED; 1479 break; 1480 case ELS_RJT_LOGIC: 1481 case ELS_RJT_UNAB: 1482 /* 1483 * If no data transfer, the command frame got dropped 1484 * so we just retry. If data was transferred, we 1485 * lost the response but the target has no record, 1486 * so we abort and retry. 1487 */ 1488 if (rjt->er_explan == ELS_EXPL_OXID_RXID && 1489 fsp->xfer_len == 0) { 1490 fc_fcp_retry_cmd(fsp); 1491 break; 1492 } 1493 fc_fcp_recovery(fsp, FC_ERROR); 1494 break; 1495 } 1496 } else if (opcode == ELS_LS_ACC) { 1497 if (fsp->state & FC_SRB_ABORTED) 1498 goto unlock_out; 1499 1500 data_dir = fsp->cmd->sc_data_direction; 1501 recp = fc_frame_payload_get(fp, sizeof(*recp)); 1502 offset = ntohl(recp->reca_fc4value); 1503 e_stat = ntohl(recp->reca_e_stat); 1504 1505 if (e_stat & ESB_ST_COMPLETE) { 1506 1507 /* 1508 * The exchange is complete. 1509 * 1510 * For output, we must've lost the response. 1511 * For input, all data must've been sent. 1512 * We lost may have lost the response 1513 * (and a confirmation was requested) and maybe 1514 * some data. 1515 * 1516 * If all data received, send SRR 1517 * asking for response. If partial data received, 1518 * or gaps, SRR requests data at start of gap. 1519 * Recovery via SRR relies on in-order-delivery. 1520 */ 1521 if (data_dir == DMA_TO_DEVICE) { 1522 r_ctl = FC_RCTL_DD_CMD_STATUS; 1523 } else if (fsp->xfer_contig_end == offset) { 1524 r_ctl = FC_RCTL_DD_CMD_STATUS; 1525 } else { 1526 offset = fsp->xfer_contig_end; 1527 r_ctl = FC_RCTL_DD_SOL_DATA; 1528 } 1529 fc_fcp_srr(fsp, r_ctl, offset); 1530 } else if (e_stat & ESB_ST_SEQ_INIT) { 1531 /* 1532 * The remote port has the initiative, so just 1533 * keep waiting for it to complete. 1534 */ 1535 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp)); 1536 } else { 1537 1538 /* 1539 * The exchange is incomplete, we have seq. initiative. 1540 * Lost response with requested confirmation, 1541 * lost confirmation, lost transfer ready or 1542 * lost write data. 1543 * 1544 * For output, if not all data was received, ask 1545 * for transfer ready to be repeated. 1546 * 1547 * If we received or sent all the data, send SRR to 1548 * request response. 1549 * 1550 * If we lost a response, we may have lost some read 1551 * data as well. 1552 */ 1553 r_ctl = FC_RCTL_DD_SOL_DATA; 1554 if (data_dir == DMA_TO_DEVICE) { 1555 r_ctl = FC_RCTL_DD_CMD_STATUS; 1556 if (offset < fsp->data_len) 1557 r_ctl = FC_RCTL_DD_DATA_DESC; 1558 } else if (offset == fsp->xfer_contig_end) { 1559 r_ctl = FC_RCTL_DD_CMD_STATUS; 1560 } else if (fsp->xfer_contig_end < offset) { 1561 offset = fsp->xfer_contig_end; 1562 } 1563 fc_fcp_srr(fsp, r_ctl, offset); 1564 } 1565 } 1566 unlock_out: 1567 fc_fcp_unlock_pkt(fsp); 1568 out: 1569 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */ 1570 fc_frame_free(fp); 1571 } 1572 1573 /** 1574 * fc_fcp_rec_error() - Handler for REC errors 1575 * @fsp: The FCP packet the error is on 1576 * @fp: The REC frame 1577 */ 1578 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 1579 { 1580 int error = PTR_ERR(fp); 1581 1582 if (fc_fcp_lock_pkt(fsp)) 1583 goto out; 1584 1585 switch (error) { 1586 case -FC_EX_CLOSED: 1587 fc_fcp_retry_cmd(fsp); 1588 break; 1589 1590 default: 1591 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n", 1592 fsp, fsp->rport->port_id, error); 1593 fsp->status_code = FC_CMD_PLOGO; 1594 /* fall through */ 1595 1596 case -FC_EX_TIMEOUT: 1597 /* 1598 * Assume REC or LS_ACC was lost. 1599 * The exchange manager will have aborted REC, so retry. 1600 */ 1601 FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n", 1602 fsp->rport->port_id, error, fsp->recov_retry, 1603 FC_MAX_RECOV_RETRY); 1604 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) 1605 fc_fcp_rec(fsp); 1606 else 1607 fc_fcp_recovery(fsp, FC_ERROR); 1608 break; 1609 } 1610 fc_fcp_unlock_pkt(fsp); 1611 out: 1612 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */ 1613 } 1614 1615 /** 1616 * fc_fcp_recovery() - Handler for fcp_pkt recovery 1617 * @fsp: The FCP pkt that needs to be aborted 1618 */ 1619 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code) 1620 { 1621 fsp->status_code = code; 1622 fsp->cdb_status = 0; 1623 fsp->io_status = 0; 1624 /* 1625 * if this fails then we let the scsi command timer fire and 1626 * scsi-ml escalate. 1627 */ 1628 fc_fcp_send_abort(fsp); 1629 } 1630 1631 /** 1632 * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request) 1633 * @fsp: The FCP packet the SRR is to be sent on 1634 * @r_ctl: The R_CTL field for the SRR request 1635 * This is called after receiving status but insufficient data, or 1636 * when expecting status but the request has timed out. 1637 */ 1638 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset) 1639 { 1640 struct fc_lport *lport = fsp->lp; 1641 struct fc_rport *rport; 1642 struct fc_rport_libfc_priv *rpriv; 1643 struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr); 1644 struct fc_seq *seq; 1645 struct fcp_srr *srr; 1646 struct fc_frame *fp; 1647 unsigned int rec_tov; 1648 1649 rport = fsp->rport; 1650 rpriv = rport->dd_data; 1651 1652 if (!(rpriv->flags & FC_RP_FLAGS_RETRY) || 1653 rpriv->rp_state != RPORT_ST_READY) 1654 goto retry; /* shouldn't happen */ 1655 fp = fc_fcp_frame_alloc(lport, sizeof(*srr)); 1656 if (!fp) 1657 goto retry; 1658 1659 srr = fc_frame_payload_get(fp, sizeof(*srr)); 1660 memset(srr, 0, sizeof(*srr)); 1661 srr->srr_op = ELS_SRR; 1662 srr->srr_ox_id = htons(ep->oxid); 1663 srr->srr_rx_id = htons(ep->rxid); 1664 srr->srr_r_ctl = r_ctl; 1665 srr->srr_rel_off = htonl(offset); 1666 1667 fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id, 1668 rpriv->local_port->port_id, FC_TYPE_FCP, 1669 FC_FCTL_REQ, 0); 1670 1671 rec_tov = get_fsp_rec_tov(fsp); 1672 seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, 1673 fc_fcp_pkt_destroy, 1674 fsp, jiffies_to_msecs(rec_tov)); 1675 if (!seq) 1676 goto retry; 1677 1678 fsp->recov_seq = seq; 1679 fsp->xfer_len = offset; 1680 fsp->xfer_contig_end = offset; 1681 fsp->state &= ~FC_SRB_RCV_STATUS; 1682 fc_fcp_pkt_hold(fsp); /* hold for outstanding SRR */ 1683 return; 1684 retry: 1685 fc_fcp_retry_cmd(fsp); 1686 } 1687 1688 /** 1689 * fc_fcp_srr_resp() - Handler for SRR response 1690 * @seq: The sequence the SRR is on 1691 * @fp: The SRR frame 1692 * @arg: The FCP packet the SRR is on 1693 */ 1694 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) 1695 { 1696 struct fc_fcp_pkt *fsp = arg; 1697 struct fc_frame_header *fh; 1698 1699 if (IS_ERR(fp)) { 1700 fc_fcp_srr_error(fsp, fp); 1701 return; 1702 } 1703 1704 if (fc_fcp_lock_pkt(fsp)) 1705 goto out; 1706 1707 fh = fc_frame_header_get(fp); 1708 /* 1709 * BUG? fc_fcp_srr_error calls exch_done which would release 1710 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT, 1711 * then fc_exch_timeout would be sending an abort. The exch_done 1712 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing 1713 * an abort response though. 1714 */ 1715 if (fh->fh_type == FC_TYPE_BLS) { 1716 fc_fcp_unlock_pkt(fsp); 1717 return; 1718 } 1719 1720 switch (fc_frame_payload_op(fp)) { 1721 case ELS_LS_ACC: 1722 fsp->recov_retry = 0; 1723 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp)); 1724 break; 1725 case ELS_LS_RJT: 1726 default: 1727 fc_fcp_recovery(fsp, FC_ERROR); 1728 break; 1729 } 1730 fc_fcp_unlock_pkt(fsp); 1731 out: 1732 fsp->lp->tt.exch_done(seq); 1733 fc_frame_free(fp); 1734 } 1735 1736 /** 1737 * fc_fcp_srr_error() - Handler for SRR errors 1738 * @fsp: The FCP packet that the SRR error is on 1739 * @fp: The SRR frame 1740 */ 1741 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 1742 { 1743 if (fc_fcp_lock_pkt(fsp)) 1744 goto out; 1745 switch (PTR_ERR(fp)) { 1746 case -FC_EX_TIMEOUT: 1747 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) 1748 fc_fcp_rec(fsp); 1749 else 1750 fc_fcp_recovery(fsp, FC_TIMED_OUT); 1751 break; 1752 case -FC_EX_CLOSED: /* e.g., link failure */ 1753 /* fall through */ 1754 default: 1755 fc_fcp_retry_cmd(fsp); 1756 break; 1757 } 1758 fc_fcp_unlock_pkt(fsp); 1759 out: 1760 fsp->lp->tt.exch_done(fsp->recov_seq); 1761 } 1762 1763 /** 1764 * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready 1765 * @lport: The local port to be checked 1766 */ 1767 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport) 1768 { 1769 /* lock ? */ 1770 return (lport->state == LPORT_ST_READY) && 1771 lport->link_up && !lport->qfull; 1772 } 1773 1774 /** 1775 * fc_queuecommand() - The queuecommand function of the SCSI template 1776 * @shost: The Scsi_Host that the command was issued to 1777 * @cmd: The scsi_cmnd to be executed 1778 * 1779 * This is the i/o strategy routine, called by the SCSI layer. 1780 */ 1781 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd) 1782 { 1783 struct fc_lport *lport = shost_priv(shost); 1784 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); 1785 struct fc_fcp_pkt *fsp; 1786 struct fc_rport_libfc_priv *rpriv; 1787 int rval; 1788 int rc = 0; 1789 struct fcoe_dev_stats *stats; 1790 1791 rval = fc_remote_port_chkready(rport); 1792 if (rval) { 1793 sc_cmd->result = rval; 1794 sc_cmd->scsi_done(sc_cmd); 1795 return 0; 1796 } 1797 1798 if (!*(struct fc_remote_port **)rport->dd_data) { 1799 /* 1800 * rport is transitioning from blocked/deleted to 1801 * online 1802 */ 1803 sc_cmd->result = DID_IMM_RETRY << 16; 1804 sc_cmd->scsi_done(sc_cmd); 1805 goto out; 1806 } 1807 1808 rpriv = rport->dd_data; 1809 1810 if (!fc_fcp_lport_queue_ready(lport)) { 1811 if (lport->qfull) 1812 fc_fcp_can_queue_ramp_down(lport); 1813 rc = SCSI_MLQUEUE_HOST_BUSY; 1814 goto out; 1815 } 1816 1817 fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC); 1818 if (fsp == NULL) { 1819 rc = SCSI_MLQUEUE_HOST_BUSY; 1820 goto out; 1821 } 1822 1823 /* 1824 * build the libfc request pkt 1825 */ 1826 fsp->cmd = sc_cmd; /* save the cmd */ 1827 fsp->rport = rport; /* set the remote port ptr */ 1828 1829 /* 1830 * set up the transfer length 1831 */ 1832 fsp->data_len = scsi_bufflen(sc_cmd); 1833 fsp->xfer_len = 0; 1834 1835 /* 1836 * setup the data direction 1837 */ 1838 stats = per_cpu_ptr(lport->dev_stats, get_cpu()); 1839 if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) { 1840 fsp->req_flags = FC_SRB_READ; 1841 stats->InputRequests++; 1842 stats->InputBytes += fsp->data_len; 1843 } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) { 1844 fsp->req_flags = FC_SRB_WRITE; 1845 stats->OutputRequests++; 1846 stats->OutputBytes += fsp->data_len; 1847 } else { 1848 fsp->req_flags = 0; 1849 stats->ControlRequests++; 1850 } 1851 put_cpu(); 1852 1853 init_timer(&fsp->timer); 1854 fsp->timer.data = (unsigned long)fsp; 1855 1856 /* 1857 * send it to the lower layer 1858 * if we get -1 return then put the request in the pending 1859 * queue. 1860 */ 1861 rval = fc_fcp_pkt_send(lport, fsp); 1862 if (rval != 0) { 1863 fsp->state = FC_SRB_FREE; 1864 fc_fcp_pkt_release(fsp); 1865 rc = SCSI_MLQUEUE_HOST_BUSY; 1866 } 1867 out: 1868 return rc; 1869 } 1870 EXPORT_SYMBOL(fc_queuecommand); 1871 1872 /** 1873 * fc_io_compl() - Handle responses for completed commands 1874 * @fsp: The FCP packet that is complete 1875 * 1876 * Translates fcp_pkt errors to a Linux SCSI errors. 1877 * The fcp packet lock must be held when calling. 1878 */ 1879 static void fc_io_compl(struct fc_fcp_pkt *fsp) 1880 { 1881 struct fc_fcp_internal *si; 1882 struct scsi_cmnd *sc_cmd; 1883 struct fc_lport *lport; 1884 unsigned long flags; 1885 1886 /* release outstanding ddp context */ 1887 fc_fcp_ddp_done(fsp); 1888 1889 fsp->state |= FC_SRB_COMPL; 1890 if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) { 1891 spin_unlock_bh(&fsp->scsi_pkt_lock); 1892 del_timer_sync(&fsp->timer); 1893 spin_lock_bh(&fsp->scsi_pkt_lock); 1894 } 1895 1896 lport = fsp->lp; 1897 si = fc_get_scsi_internal(lport); 1898 1899 /* 1900 * if can_queue ramp down is done then try can_queue ramp up 1901 * since commands are completing now. 1902 */ 1903 if (si->last_can_queue_ramp_down_time) 1904 fc_fcp_can_queue_ramp_up(lport); 1905 1906 sc_cmd = fsp->cmd; 1907 CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status; 1908 switch (fsp->status_code) { 1909 case FC_COMPLETE: 1910 if (fsp->cdb_status == 0) { 1911 /* 1912 * good I/O status 1913 */ 1914 sc_cmd->result = DID_OK << 16; 1915 if (fsp->scsi_resid) 1916 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; 1917 } else { 1918 /* 1919 * transport level I/O was ok but scsi 1920 * has non zero status 1921 */ 1922 sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; 1923 } 1924 break; 1925 case FC_ERROR: 1926 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1927 "due to FC_ERROR\n"); 1928 sc_cmd->result = DID_ERROR << 16; 1929 break; 1930 case FC_DATA_UNDRUN: 1931 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) { 1932 /* 1933 * scsi status is good but transport level 1934 * underrun. 1935 */ 1936 if (fsp->state & FC_SRB_RCV_STATUS) { 1937 sc_cmd->result = DID_OK << 16; 1938 } else { 1939 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml" 1940 " due to FC_DATA_UNDRUN (trans)\n"); 1941 sc_cmd->result = DID_ERROR << 16; 1942 } 1943 } else { 1944 /* 1945 * scsi got underrun, this is an error 1946 */ 1947 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1948 "due to FC_DATA_UNDRUN (scsi)\n"); 1949 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; 1950 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; 1951 } 1952 break; 1953 case FC_DATA_OVRRUN: 1954 /* 1955 * overrun is an error 1956 */ 1957 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1958 "due to FC_DATA_OVRRUN\n"); 1959 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; 1960 break; 1961 case FC_CMD_ABORTED: 1962 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1963 "due to FC_CMD_ABORTED\n"); 1964 sc_cmd->result = (DID_ERROR << 16) | fsp->io_status; 1965 break; 1966 case FC_CMD_RESET: 1967 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml " 1968 "due to FC_CMD_RESET\n"); 1969 sc_cmd->result = (DID_RESET << 16); 1970 break; 1971 case FC_HRD_ERROR: 1972 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml " 1973 "due to FC_HRD_ERROR\n"); 1974 sc_cmd->result = (DID_NO_CONNECT << 16); 1975 break; 1976 case FC_CRC_ERROR: 1977 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml " 1978 "due to FC_CRC_ERROR\n"); 1979 sc_cmd->result = (DID_PARITY << 16); 1980 break; 1981 case FC_TIMED_OUT: 1982 FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml " 1983 "due to FC_TIMED_OUT\n"); 1984 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status; 1985 break; 1986 default: 1987 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1988 "due to unknown error\n"); 1989 sc_cmd->result = (DID_ERROR << 16); 1990 break; 1991 } 1992 1993 if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE) 1994 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16); 1995 1996 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1997 list_del(&fsp->list); 1998 sc_cmd->SCp.ptr = NULL; 1999 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 2000 sc_cmd->scsi_done(sc_cmd); 2001 2002 /* release ref from initial allocation in queue command */ 2003 fc_fcp_pkt_release(fsp); 2004 } 2005 2006 /** 2007 * fc_eh_abort() - Abort a command 2008 * @sc_cmd: The SCSI command to abort 2009 * 2010 * From SCSI host template. 2011 * Send an ABTS to the target device and wait for the response. 2012 */ 2013 int fc_eh_abort(struct scsi_cmnd *sc_cmd) 2014 { 2015 struct fc_fcp_pkt *fsp; 2016 struct fc_lport *lport; 2017 struct fc_fcp_internal *si; 2018 int rc = FAILED; 2019 unsigned long flags; 2020 int rval; 2021 2022 rval = fc_block_scsi_eh(sc_cmd); 2023 if (rval) 2024 return rval; 2025 2026 lport = shost_priv(sc_cmd->device->host); 2027 if (lport->state != LPORT_ST_READY) 2028 return rc; 2029 else if (!lport->link_up) 2030 return rc; 2031 2032 si = fc_get_scsi_internal(lport); 2033 spin_lock_irqsave(&si->scsi_queue_lock, flags); 2034 fsp = CMD_SP(sc_cmd); 2035 if (!fsp) { 2036 /* command completed while scsi eh was setting up */ 2037 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 2038 return SUCCESS; 2039 } 2040 /* grab a ref so the fsp and sc_cmd cannot be relased from under us */ 2041 fc_fcp_pkt_hold(fsp); 2042 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 2043 2044 if (fc_fcp_lock_pkt(fsp)) { 2045 /* completed while we were waiting for timer to be deleted */ 2046 rc = SUCCESS; 2047 goto release_pkt; 2048 } 2049 2050 rc = fc_fcp_pkt_abort(fsp); 2051 fc_fcp_unlock_pkt(fsp); 2052 2053 release_pkt: 2054 fc_fcp_pkt_release(fsp); 2055 return rc; 2056 } 2057 EXPORT_SYMBOL(fc_eh_abort); 2058 2059 /** 2060 * fc_eh_device_reset() - Reset a single LUN 2061 * @sc_cmd: The SCSI command which identifies the device whose 2062 * LUN is to be reset 2063 * 2064 * Set from SCSI host template. 2065 */ 2066 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd) 2067 { 2068 struct fc_lport *lport; 2069 struct fc_fcp_pkt *fsp; 2070 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); 2071 int rc = FAILED; 2072 int rval; 2073 2074 rval = fc_block_scsi_eh(sc_cmd); 2075 if (rval) 2076 return rval; 2077 2078 lport = shost_priv(sc_cmd->device->host); 2079 2080 if (lport->state != LPORT_ST_READY) 2081 return rc; 2082 2083 FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id); 2084 2085 fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO); 2086 if (fsp == NULL) { 2087 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n"); 2088 goto out; 2089 } 2090 2091 /* 2092 * Build the libfc request pkt. Do not set the scsi cmnd, because 2093 * the sc passed in is not setup for execution like when sent 2094 * through the queuecommand callout. 2095 */ 2096 fsp->rport = rport; /* set the remote port ptr */ 2097 2098 /* 2099 * flush outstanding commands 2100 */ 2101 rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun); 2102 fsp->state = FC_SRB_FREE; 2103 fc_fcp_pkt_release(fsp); 2104 2105 out: 2106 return rc; 2107 } 2108 EXPORT_SYMBOL(fc_eh_device_reset); 2109 2110 /** 2111 * fc_eh_host_reset() - Reset a Scsi_Host. 2112 * @sc_cmd: The SCSI command that identifies the SCSI host to be reset 2113 */ 2114 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) 2115 { 2116 struct Scsi_Host *shost = sc_cmd->device->host; 2117 struct fc_lport *lport = shost_priv(shost); 2118 unsigned long wait_tmo; 2119 2120 FC_SCSI_DBG(lport, "Resetting host\n"); 2121 2122 fc_block_scsi_eh(sc_cmd); 2123 2124 lport->tt.lport_reset(lport); 2125 wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT; 2126 while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies, 2127 wait_tmo)) 2128 msleep(1000); 2129 2130 if (fc_fcp_lport_queue_ready(lport)) { 2131 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded " 2132 "on port (%6.6x)\n", lport->port_id); 2133 return SUCCESS; 2134 } else { 2135 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, " 2136 "port (%6.6x) is not ready.\n", 2137 lport->port_id); 2138 return FAILED; 2139 } 2140 } 2141 EXPORT_SYMBOL(fc_eh_host_reset); 2142 2143 /** 2144 * fc_slave_alloc() - Configure the queue depth of a Scsi_Host 2145 * @sdev: The SCSI device that identifies the SCSI host 2146 * 2147 * Configures queue depth based on host's cmd_per_len. If not set 2148 * then we use the libfc default. 2149 */ 2150 int fc_slave_alloc(struct scsi_device *sdev) 2151 { 2152 struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); 2153 2154 if (!rport || fc_remote_port_chkready(rport)) 2155 return -ENXIO; 2156 2157 if (sdev->tagged_supported) 2158 scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH); 2159 else 2160 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), 2161 FC_FCP_DFLT_QUEUE_DEPTH); 2162 2163 return 0; 2164 } 2165 EXPORT_SYMBOL(fc_slave_alloc); 2166 2167 /** 2168 * fc_change_queue_depth() - Change a device's queue depth 2169 * @sdev: The SCSI device whose queue depth is to change 2170 * @qdepth: The new queue depth 2171 * @reason: The resason for the change 2172 */ 2173 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) 2174 { 2175 switch (reason) { 2176 case SCSI_QDEPTH_DEFAULT: 2177 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); 2178 break; 2179 case SCSI_QDEPTH_QFULL: 2180 scsi_track_queue_full(sdev, qdepth); 2181 break; 2182 case SCSI_QDEPTH_RAMP_UP: 2183 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); 2184 break; 2185 default: 2186 return -EOPNOTSUPP; 2187 } 2188 return sdev->queue_depth; 2189 } 2190 EXPORT_SYMBOL(fc_change_queue_depth); 2191 2192 /** 2193 * fc_change_queue_type() - Change a device's queue type 2194 * @sdev: The SCSI device whose queue depth is to change 2195 * @tag_type: Identifier for queue type 2196 */ 2197 int fc_change_queue_type(struct scsi_device *sdev, int tag_type) 2198 { 2199 if (sdev->tagged_supported) { 2200 scsi_set_tag_type(sdev, tag_type); 2201 if (tag_type) 2202 scsi_activate_tcq(sdev, sdev->queue_depth); 2203 else 2204 scsi_deactivate_tcq(sdev, sdev->queue_depth); 2205 } else 2206 tag_type = 0; 2207 2208 return tag_type; 2209 } 2210 EXPORT_SYMBOL(fc_change_queue_type); 2211 2212 /** 2213 * fc_fcp_destory() - Tear down the FCP layer for a given local port 2214 * @lport: The local port that no longer needs the FCP layer 2215 */ 2216 void fc_fcp_destroy(struct fc_lport *lport) 2217 { 2218 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 2219 2220 if (!list_empty(&si->scsi_pkt_queue)) 2221 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying " 2222 "port (%6.6x)\n", lport->port_id); 2223 2224 mempool_destroy(si->scsi_pkt_pool); 2225 kfree(si); 2226 lport->scsi_priv = NULL; 2227 } 2228 EXPORT_SYMBOL(fc_fcp_destroy); 2229 2230 int fc_setup_fcp(void) 2231 { 2232 int rc = 0; 2233 2234 scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt", 2235 sizeof(struct fc_fcp_pkt), 2236 0, SLAB_HWCACHE_ALIGN, NULL); 2237 if (!scsi_pkt_cachep) { 2238 printk(KERN_ERR "libfc: Unable to allocate SRB cache, " 2239 "module load failed!"); 2240 rc = -ENOMEM; 2241 } 2242 2243 return rc; 2244 } 2245 2246 void fc_destroy_fcp(void) 2247 { 2248 if (scsi_pkt_cachep) 2249 kmem_cache_destroy(scsi_pkt_cachep); 2250 } 2251 2252 /** 2253 * fc_fcp_init() - Initialize the FCP layer for a local port 2254 * @lport: The local port to initialize the exchange layer for 2255 */ 2256 int fc_fcp_init(struct fc_lport *lport) 2257 { 2258 int rc; 2259 struct fc_fcp_internal *si; 2260 2261 if (!lport->tt.fcp_cmd_send) 2262 lport->tt.fcp_cmd_send = fc_fcp_cmd_send; 2263 2264 if (!lport->tt.fcp_cleanup) 2265 lport->tt.fcp_cleanup = fc_fcp_cleanup; 2266 2267 if (!lport->tt.fcp_abort_io) 2268 lport->tt.fcp_abort_io = fc_fcp_abort_io; 2269 2270 si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL); 2271 if (!si) 2272 return -ENOMEM; 2273 lport->scsi_priv = si; 2274 si->max_can_queue = lport->host->can_queue; 2275 INIT_LIST_HEAD(&si->scsi_pkt_queue); 2276 spin_lock_init(&si->scsi_queue_lock); 2277 2278 si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep); 2279 if (!si->scsi_pkt_pool) { 2280 rc = -ENOMEM; 2281 goto free_internal; 2282 } 2283 return 0; 2284 2285 free_internal: 2286 kfree(si); 2287 return rc; 2288 } 2289 EXPORT_SYMBOL(fc_fcp_init); 2290