1 /* 2 * Copyright(c) 2007 Intel Corporation. All rights reserved. 3 * Copyright(c) 2008 Red Hat, Inc. All rights reserved. 4 * Copyright(c) 2008 Mike Christie 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms and conditions of the GNU General Public License, 8 * version 2, as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope it will be useful, but WITHOUT 11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 * more details. 14 * 15 * You should have received a copy of the GNU General Public License along with 16 * this program; if not, write to the Free Software Foundation, Inc., 17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Maintained at www.Open-FCoE.org 20 */ 21 22 #include <linux/module.h> 23 #include <linux/delay.h> 24 #include <linux/kernel.h> 25 #include <linux/types.h> 26 #include <linux/spinlock.h> 27 #include <linux/scatterlist.h> 28 #include <linux/err.h> 29 #include <linux/crc32.h> 30 #include <linux/slab.h> 31 32 #include <scsi/scsi_tcq.h> 33 #include <scsi/scsi.h> 34 #include <scsi/scsi_host.h> 35 #include <scsi/scsi_device.h> 36 #include <scsi/scsi_cmnd.h> 37 38 #include <scsi/fc/fc_fc2.h> 39 40 #include <scsi/libfc.h> 41 #include <scsi/fc_encode.h> 42 43 #include "fc_libfc.h" 44 45 struct kmem_cache *scsi_pkt_cachep; 46 47 /* SRB state definitions */ 48 #define FC_SRB_FREE 0 /* cmd is free */ 49 #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */ 50 #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */ 51 #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */ 52 #define FC_SRB_ABORTED (1 << 3) /* abort acknowledged */ 53 #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */ 54 #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */ 55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */ 56 57 #define FC_SRB_READ (1 << 1) 58 #define FC_SRB_WRITE (1 << 0) 59 60 /* 61 * The SCp.ptr should be tested and set under the scsi_pkt_queue lock 62 */ 63 #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr) 64 #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) 65 #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual) 66 #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status) 67 #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual) 68 69 /** 70 * struct fc_fcp_internal - FCP layer internal data 71 * @scsi_pkt_pool: Memory pool to draw FCP packets from 72 * @scsi_queue_lock: Protects the scsi_pkt_queue 73 * @scsi_pkt_queue: Current FCP packets 74 * @last_can_queue_ramp_down_time: ramp down time 75 * @last_can_queue_ramp_up_time: ramp up time 76 * @max_can_queue: max can_queue size 77 */ 78 struct fc_fcp_internal { 79 mempool_t *scsi_pkt_pool; 80 spinlock_t scsi_queue_lock; 81 struct list_head scsi_pkt_queue; 82 unsigned long last_can_queue_ramp_down_time; 83 unsigned long last_can_queue_ramp_up_time; 84 int max_can_queue; 85 }; 86 87 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv) 88 89 /* 90 * function prototypes 91 * FC scsi I/O related functions 92 */ 93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *); 94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *); 95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *); 96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *); 97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *); 98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *); 99 static void fc_fcp_recovery(struct fc_fcp_pkt *); 100 static void fc_fcp_timeout(unsigned long); 101 static void fc_fcp_rec(struct fc_fcp_pkt *); 102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *); 103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *); 104 static void fc_io_compl(struct fc_fcp_pkt *); 105 106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32); 107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *); 108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *); 109 110 /* 111 * command status codes 112 */ 113 #define FC_COMPLETE 0 114 #define FC_CMD_ABORTED 1 115 #define FC_CMD_RESET 2 116 #define FC_CMD_PLOGO 3 117 #define FC_SNS_RCV 4 118 #define FC_TRANS_ERR 5 119 #define FC_DATA_OVRRUN 6 120 #define FC_DATA_UNDRUN 7 121 #define FC_ERROR 8 122 #define FC_HRD_ERROR 9 123 #define FC_CMD_RECOVERY 10 124 125 /* 126 * Error recovery timeout values. 127 */ 128 #define FC_SCSI_ER_TIMEOUT (10 * HZ) 129 #define FC_SCSI_TM_TOV (10 * HZ) 130 #define FC_SCSI_REC_TOV (2 * HZ) 131 #define FC_HOST_RESET_TIMEOUT (30 * HZ) 132 #define FC_CAN_QUEUE_PERIOD (60 * HZ) 133 134 #define FC_MAX_ERROR_CNT 5 135 #define FC_MAX_RECOV_RETRY 3 136 137 #define FC_FCP_DFLT_QUEUE_DEPTH 32 138 139 /** 140 * fc_fcp_pkt_alloc() - Allocate a fcp_pkt 141 * @lport: The local port that the FCP packet is for 142 * @gfp: GFP flags for allocation 143 * 144 * Return value: fcp_pkt structure or null on allocation failure. 145 * Context: Can be called from process context, no lock is required. 146 */ 147 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp) 148 { 149 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 150 struct fc_fcp_pkt *fsp; 151 152 fsp = mempool_alloc(si->scsi_pkt_pool, gfp); 153 if (fsp) { 154 memset(fsp, 0, sizeof(*fsp)); 155 fsp->lp = lport; 156 atomic_set(&fsp->ref_cnt, 1); 157 init_timer(&fsp->timer); 158 INIT_LIST_HEAD(&fsp->list); 159 spin_lock_init(&fsp->scsi_pkt_lock); 160 } 161 return fsp; 162 } 163 164 /** 165 * fc_fcp_pkt_release() - Release hold on a fcp_pkt 166 * @fsp: The FCP packet to be released 167 * 168 * Context: Can be called from process or interrupt context, 169 * no lock is required. 170 */ 171 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp) 172 { 173 if (atomic_dec_and_test(&fsp->ref_cnt)) { 174 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp); 175 176 mempool_free(fsp, si->scsi_pkt_pool); 177 } 178 } 179 180 /** 181 * fc_fcp_pkt_hold() - Hold a fcp_pkt 182 * @fsp: The FCP packet to be held 183 */ 184 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp) 185 { 186 atomic_inc(&fsp->ref_cnt); 187 } 188 189 /** 190 * fc_fcp_pkt_destory() - Release hold on a fcp_pkt 191 * @seq: The sequence that the FCP packet is on (required by destructor API) 192 * @fsp: The FCP packet to be released 193 * 194 * This routine is called by a destructor callback in the exch_seq_send() 195 * routine of the libfc Transport Template. The 'struct fc_seq' is a required 196 * argument even though it is not used by this routine. 197 * 198 * Context: No locking required. 199 */ 200 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp) 201 { 202 fc_fcp_pkt_release(fsp); 203 } 204 205 /** 206 * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count 207 * @fsp: The FCP packet to be locked and incremented 208 * 209 * We should only return error if we return a command to SCSI-ml before 210 * getting a response. This can happen in cases where we send a abort, but 211 * do not wait for the response and the abort and command can be passing 212 * each other on the wire/network-layer. 213 * 214 * Note: this function locks the packet and gets a reference to allow 215 * callers to call the completion function while the lock is held and 216 * not have to worry about the packets refcount. 217 * 218 * TODO: Maybe we should just have callers grab/release the lock and 219 * have a function that they call to verify the fsp and grab a ref if 220 * needed. 221 */ 222 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp) 223 { 224 spin_lock_bh(&fsp->scsi_pkt_lock); 225 if (fsp->state & FC_SRB_COMPL) { 226 spin_unlock_bh(&fsp->scsi_pkt_lock); 227 return -EPERM; 228 } 229 230 fc_fcp_pkt_hold(fsp); 231 return 0; 232 } 233 234 /** 235 * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its 236 * reference count 237 * @fsp: The FCP packet to be unlocked and decremented 238 */ 239 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp) 240 { 241 spin_unlock_bh(&fsp->scsi_pkt_lock); 242 fc_fcp_pkt_release(fsp); 243 } 244 245 /** 246 * fc_fcp_timer_set() - Start a timer for a fcp_pkt 247 * @fsp: The FCP packet to start a timer for 248 * @delay: The timeout period for the timer 249 */ 250 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay) 251 { 252 if (!(fsp->state & FC_SRB_COMPL)) 253 mod_timer(&fsp->timer, jiffies + delay); 254 } 255 256 /** 257 * fc_fcp_send_abort() - Send an abort for exchanges associated with a 258 * fcp_pkt 259 * @fsp: The FCP packet to abort exchanges on 260 */ 261 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp) 262 { 263 if (!fsp->seq_ptr) 264 return -EINVAL; 265 266 fsp->state |= FC_SRB_ABORT_PENDING; 267 return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0); 268 } 269 270 /** 271 * fc_fcp_retry_cmd() - Retry a fcp_pkt 272 * @fsp: The FCP packet to be retried 273 * 274 * Sets the status code to be FC_ERROR and then calls 275 * fc_fcp_complete_locked() which in turn calls fc_io_compl(). 276 * fc_io_compl() will notify the SCSI-ml that the I/O is done. 277 * The SCSI-ml will retry the command. 278 */ 279 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp) 280 { 281 if (fsp->seq_ptr) { 282 fsp->lp->tt.exch_done(fsp->seq_ptr); 283 fsp->seq_ptr = NULL; 284 } 285 286 fsp->state &= ~FC_SRB_ABORT_PENDING; 287 fsp->io_status = 0; 288 fsp->status_code = FC_ERROR; 289 fc_fcp_complete_locked(fsp); 290 } 291 292 /** 293 * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context 294 * @fsp: The FCP packet that will manage the DDP frames 295 * @xid: The XID that will be used for the DDP exchange 296 */ 297 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) 298 { 299 struct fc_lport *lport; 300 301 lport = fsp->lp; 302 if ((fsp->req_flags & FC_SRB_READ) && 303 (lport->lro_enabled) && (lport->tt.ddp_setup)) { 304 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd), 305 scsi_sg_count(fsp->cmd))) 306 fsp->xfer_ddp = xid; 307 } 308 } 309 310 /** 311 * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any 312 * DDP related resources for a fcp_pkt 313 * @fsp: The FCP packet that DDP had been used on 314 */ 315 static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) 316 { 317 struct fc_lport *lport; 318 319 if (!fsp) 320 return; 321 322 if (fsp->xfer_ddp == FC_XID_UNKNOWN) 323 return; 324 325 lport = fsp->lp; 326 if (lport->tt.ddp_done) { 327 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp); 328 fsp->xfer_ddp = FC_XID_UNKNOWN; 329 } 330 } 331 332 /** 333 * fc_fcp_can_queue_ramp_up() - increases can_queue 334 * @lport: lport to ramp up can_queue 335 * 336 * Locking notes: Called with Scsi_Host lock held 337 */ 338 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport) 339 { 340 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 341 int can_queue; 342 343 if (si->last_can_queue_ramp_up_time && 344 (time_before(jiffies, si->last_can_queue_ramp_up_time + 345 FC_CAN_QUEUE_PERIOD))) 346 return; 347 348 if (time_before(jiffies, si->last_can_queue_ramp_down_time + 349 FC_CAN_QUEUE_PERIOD)) 350 return; 351 352 si->last_can_queue_ramp_up_time = jiffies; 353 354 can_queue = lport->host->can_queue << 1; 355 if (can_queue >= si->max_can_queue) { 356 can_queue = si->max_can_queue; 357 si->last_can_queue_ramp_down_time = 0; 358 } 359 lport->host->can_queue = can_queue; 360 shost_printk(KERN_ERR, lport->host, "libfc: increased " 361 "can_queue to %d.\n", can_queue); 362 } 363 364 /** 365 * fc_fcp_can_queue_ramp_down() - reduces can_queue 366 * @lport: lport to reduce can_queue 367 * 368 * If we are getting memory allocation failures, then we may 369 * be trying to execute too many commands. We let the running 370 * commands complete or timeout, then try again with a reduced 371 * can_queue. Eventually we will hit the point where we run 372 * on all reserved structs. 373 * 374 * Locking notes: Called with Scsi_Host lock held 375 */ 376 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport) 377 { 378 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 379 int can_queue; 380 381 if (si->last_can_queue_ramp_down_time && 382 (time_before(jiffies, si->last_can_queue_ramp_down_time + 383 FC_CAN_QUEUE_PERIOD))) 384 return; 385 386 si->last_can_queue_ramp_down_time = jiffies; 387 388 can_queue = lport->host->can_queue; 389 can_queue >>= 1; 390 if (!can_queue) 391 can_queue = 1; 392 lport->host->can_queue = can_queue; 393 shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n" 394 "Reducing can_queue to %d.\n", can_queue); 395 } 396 397 /* 398 * fc_fcp_frame_alloc() - Allocates fc_frame structure and buffer. 399 * @lport: fc lport struct 400 * @len: payload length 401 * 402 * Allocates fc_frame structure and buffer but if fails to allocate 403 * then reduce can_queue. 404 */ 405 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport, 406 size_t len) 407 { 408 struct fc_frame *fp; 409 unsigned long flags; 410 411 fp = fc_frame_alloc(lport, len); 412 if (likely(fp)) 413 return fp; 414 415 /* error case */ 416 spin_lock_irqsave(lport->host->host_lock, flags); 417 fc_fcp_can_queue_ramp_down(lport); 418 spin_unlock_irqrestore(lport->host->host_lock, flags); 419 return NULL; 420 } 421 422 /** 423 * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target 424 * @fsp: The FCP packet the data is on 425 * @fp: The data frame 426 */ 427 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 428 { 429 struct scsi_cmnd *sc = fsp->cmd; 430 struct fc_lport *lport = fsp->lp; 431 struct fcoe_dev_stats *stats; 432 struct fc_frame_header *fh; 433 size_t start_offset; 434 size_t offset; 435 u32 crc; 436 u32 copy_len = 0; 437 size_t len; 438 void *buf; 439 struct scatterlist *sg; 440 u32 nents; 441 442 fh = fc_frame_header_get(fp); 443 offset = ntohl(fh->fh_parm_offset); 444 start_offset = offset; 445 len = fr_len(fp) - sizeof(*fh); 446 buf = fc_frame_payload_get(fp, 0); 447 448 /* 449 * if this I/O is ddped then clear it 450 * and initiate recovery since data 451 * frames are expected to be placed 452 * directly in that case. 453 */ 454 if (fsp->xfer_ddp != FC_XID_UNKNOWN) { 455 fc_fcp_ddp_done(fsp); 456 goto err; 457 } 458 if (offset + len > fsp->data_len) { 459 /* this should never happen */ 460 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && 461 fc_frame_crc_check(fp)) 462 goto crc_err; 463 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx " 464 "data_len %x\n", len, offset, fsp->data_len); 465 goto err; 466 } 467 if (offset != fsp->xfer_len) 468 fsp->state |= FC_SRB_DISCONTIG; 469 470 sg = scsi_sglist(sc); 471 nents = scsi_sg_count(sc); 472 473 if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) { 474 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents, 475 &offset, KM_SOFTIRQ0, NULL); 476 } else { 477 crc = crc32(~0, (u8 *) fh, sizeof(*fh)); 478 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents, 479 &offset, KM_SOFTIRQ0, &crc); 480 buf = fc_frame_payload_get(fp, 0); 481 if (len % 4) 482 crc = crc32(crc, buf + len, 4 - (len % 4)); 483 484 if (~crc != le32_to_cpu(fr_crc(fp))) { 485 crc_err: 486 stats = per_cpu_ptr(lport->dev_stats, get_cpu()); 487 stats->ErrorFrames++; 488 /* per cpu count, not total count, but OK for limit */ 489 if (stats->InvalidCRCCount++ < 5) 490 printk(KERN_WARNING "libfc: CRC error on data " 491 "frame for port (%6.6x)\n", 492 lport->port_id); 493 put_cpu(); 494 /* 495 * Assume the frame is total garbage. 496 * We may have copied it over the good part 497 * of the buffer. 498 * If so, we need to retry the entire operation. 499 * Otherwise, ignore it. 500 */ 501 if (fsp->state & FC_SRB_DISCONTIG) 502 goto err; 503 return; 504 } 505 } 506 507 if (fsp->xfer_contig_end == start_offset) 508 fsp->xfer_contig_end += copy_len; 509 fsp->xfer_len += copy_len; 510 511 /* 512 * In the very rare event that this data arrived after the response 513 * and completes the transfer, call the completion handler. 514 */ 515 if (unlikely(fsp->state & FC_SRB_RCV_STATUS) && 516 fsp->xfer_len == fsp->data_len - fsp->scsi_resid) 517 fc_fcp_complete_locked(fsp); 518 return; 519 err: 520 fc_fcp_recovery(fsp); 521 } 522 523 /** 524 * fc_fcp_send_data() - Send SCSI data to a target 525 * @fsp: The FCP packet the data is on 526 * @sp: The sequence the data is to be sent on 527 * @offset: The starting offset for this data request 528 * @seq_blen: The burst length for this data request 529 * 530 * Called after receiving a Transfer Ready data descriptor. 531 * If the LLD is capable of sequence offload then send down the 532 * seq_blen amount of data in single frame, otherwise send 533 * multiple frames of the maximum frame payload supported by 534 * the target port. 535 */ 536 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq, 537 size_t offset, size_t seq_blen) 538 { 539 struct fc_exch *ep; 540 struct scsi_cmnd *sc; 541 struct scatterlist *sg; 542 struct fc_frame *fp = NULL; 543 struct fc_lport *lport = fsp->lp; 544 struct page *page; 545 size_t remaining; 546 size_t t_blen; 547 size_t tlen; 548 size_t sg_bytes; 549 size_t frame_offset, fh_parm_offset; 550 size_t off; 551 int error; 552 void *data = NULL; 553 void *page_addr; 554 int using_sg = lport->sg_supp; 555 u32 f_ctl; 556 557 WARN_ON(seq_blen <= 0); 558 if (unlikely(offset + seq_blen > fsp->data_len)) { 559 /* this should never happen */ 560 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx " 561 "offset %zx\n", seq_blen, offset); 562 fc_fcp_send_abort(fsp); 563 return 0; 564 } else if (offset != fsp->xfer_len) { 565 /* Out of Order Data Request - no problem, but unexpected. */ 566 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. " 567 "seq_blen %zx offset %zx\n", seq_blen, offset); 568 } 569 570 /* 571 * if LLD is capable of seq_offload then set transport 572 * burst length (t_blen) to seq_blen, otherwise set t_blen 573 * to max FC frame payload previously set in fsp->max_payload. 574 */ 575 t_blen = fsp->max_payload; 576 if (lport->seq_offload) { 577 t_blen = min(seq_blen, (size_t)lport->lso_max); 578 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n", 579 fsp, seq_blen, lport->lso_max, t_blen); 580 } 581 582 if (t_blen > 512) 583 t_blen &= ~(512 - 1); /* round down to block size */ 584 sc = fsp->cmd; 585 586 remaining = seq_blen; 587 fh_parm_offset = frame_offset = offset; 588 tlen = 0; 589 seq = lport->tt.seq_start_next(seq); 590 f_ctl = FC_FC_REL_OFF; 591 WARN_ON(!seq); 592 593 sg = scsi_sglist(sc); 594 595 while (remaining > 0 && sg) { 596 if (offset >= sg->length) { 597 offset -= sg->length; 598 sg = sg_next(sg); 599 continue; 600 } 601 if (!fp) { 602 tlen = min(t_blen, remaining); 603 604 /* 605 * TODO. Temporary workaround. fc_seq_send() can't 606 * handle odd lengths in non-linear skbs. 607 * This will be the final fragment only. 608 */ 609 if (tlen % 4) 610 using_sg = 0; 611 fp = fc_frame_alloc(lport, using_sg ? 0 : tlen); 612 if (!fp) 613 return -ENOMEM; 614 615 data = fc_frame_header_get(fp) + 1; 616 fh_parm_offset = frame_offset; 617 fr_max_payload(fp) = fsp->max_payload; 618 } 619 620 off = offset + sg->offset; 621 sg_bytes = min(tlen, sg->length - offset); 622 sg_bytes = min(sg_bytes, 623 (size_t) (PAGE_SIZE - (off & ~PAGE_MASK))); 624 page = sg_page(sg) + (off >> PAGE_SHIFT); 625 if (using_sg) { 626 get_page(page); 627 skb_fill_page_desc(fp_skb(fp), 628 skb_shinfo(fp_skb(fp))->nr_frags, 629 page, off & ~PAGE_MASK, sg_bytes); 630 fp_skb(fp)->data_len += sg_bytes; 631 fr_len(fp) += sg_bytes; 632 fp_skb(fp)->truesize += PAGE_SIZE; 633 } else { 634 /* 635 * The scatterlist item may be bigger than PAGE_SIZE, 636 * but we must not cross pages inside the kmap. 637 */ 638 page_addr = kmap_atomic(page, KM_SOFTIRQ0); 639 memcpy(data, (char *)page_addr + (off & ~PAGE_MASK), 640 sg_bytes); 641 kunmap_atomic(page_addr, KM_SOFTIRQ0); 642 data += sg_bytes; 643 } 644 offset += sg_bytes; 645 frame_offset += sg_bytes; 646 tlen -= sg_bytes; 647 remaining -= sg_bytes; 648 649 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) && 650 (tlen)) 651 continue; 652 653 /* 654 * Send sequence with transfer sequence initiative in case 655 * this is last FCP frame of the sequence. 656 */ 657 if (remaining == 0) 658 f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ; 659 660 ep = fc_seq_exch(seq); 661 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid, 662 FC_TYPE_FCP, f_ctl, fh_parm_offset); 663 664 /* 665 * send fragment using for a sequence. 666 */ 667 error = lport->tt.seq_send(lport, seq, fp); 668 if (error) { 669 WARN_ON(1); /* send error should be rare */ 670 fc_fcp_retry_cmd(fsp); 671 return 0; 672 } 673 fp = NULL; 674 } 675 fsp->xfer_len += seq_blen; /* premature count? */ 676 return 0; 677 } 678 679 /** 680 * fc_fcp_abts_resp() - Send an ABTS response 681 * @fsp: The FCP packet that is being aborted 682 * @fp: The response frame 683 */ 684 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 685 { 686 int ba_done = 1; 687 struct fc_ba_rjt *brp; 688 struct fc_frame_header *fh; 689 690 fh = fc_frame_header_get(fp); 691 switch (fh->fh_r_ctl) { 692 case FC_RCTL_BA_ACC: 693 break; 694 case FC_RCTL_BA_RJT: 695 brp = fc_frame_payload_get(fp, sizeof(*brp)); 696 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR) 697 break; 698 /* fall thru */ 699 default: 700 /* 701 * we will let the command timeout 702 * and scsi-ml recover in this case, 703 * therefore cleared the ba_done flag. 704 */ 705 ba_done = 0; 706 } 707 708 if (ba_done) { 709 fsp->state |= FC_SRB_ABORTED; 710 fsp->state &= ~FC_SRB_ABORT_PENDING; 711 712 if (fsp->wait_for_comp) 713 complete(&fsp->tm_done); 714 else 715 fc_fcp_complete_locked(fsp); 716 } 717 } 718 719 /** 720 * fc_fcp_recv() - Reveive an FCP frame 721 * @seq: The sequence the frame is on 722 * @fp: The received frame 723 * @arg: The related FCP packet 724 * 725 * Context: Called from Soft IRQ context. Can not be called 726 * holding the FCP packet list lock. 727 */ 728 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) 729 { 730 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; 731 struct fc_lport *lport = fsp->lp; 732 struct fc_frame_header *fh; 733 struct fcp_txrdy *dd; 734 u8 r_ctl; 735 int rc = 0; 736 737 if (IS_ERR(fp)) { 738 fc_fcp_error(fsp, fp); 739 return; 740 } 741 742 fh = fc_frame_header_get(fp); 743 r_ctl = fh->fh_r_ctl; 744 745 if (lport->state != LPORT_ST_READY) 746 goto out; 747 if (fc_fcp_lock_pkt(fsp)) 748 goto out; 749 fsp->last_pkt_time = jiffies; 750 751 if (fh->fh_type == FC_TYPE_BLS) { 752 fc_fcp_abts_resp(fsp, fp); 753 goto unlock; 754 } 755 756 if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) 757 goto unlock; 758 759 if (r_ctl == FC_RCTL_DD_DATA_DESC) { 760 /* 761 * received XFER RDY from the target 762 * need to send data to the target 763 */ 764 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED); 765 dd = fc_frame_payload_get(fp, sizeof(*dd)); 766 WARN_ON(!dd); 767 768 rc = fc_fcp_send_data(fsp, seq, 769 (size_t) ntohl(dd->ft_data_ro), 770 (size_t) ntohl(dd->ft_burst_len)); 771 if (!rc) 772 seq->rec_data = fsp->xfer_len; 773 } else if (r_ctl == FC_RCTL_DD_SOL_DATA) { 774 /* 775 * received a DATA frame 776 * next we will copy the data to the system buffer 777 */ 778 WARN_ON(fr_len(fp) < sizeof(*fh)); /* len may be 0 */ 779 fc_fcp_recv_data(fsp, fp); 780 seq->rec_data = fsp->xfer_contig_end; 781 } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) { 782 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED); 783 784 fc_fcp_resp(fsp, fp); 785 } else { 786 FC_FCP_DBG(fsp, "unexpected frame. r_ctl %x\n", r_ctl); 787 } 788 unlock: 789 fc_fcp_unlock_pkt(fsp); 790 out: 791 fc_frame_free(fp); 792 } 793 794 /** 795 * fc_fcp_resp() - Handler for FCP responses 796 * @fsp: The FCP packet the response is for 797 * @fp: The response frame 798 */ 799 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 800 { 801 struct fc_frame_header *fh; 802 struct fcp_resp *fc_rp; 803 struct fcp_resp_ext *rp_ex; 804 struct fcp_resp_rsp_info *fc_rp_info; 805 u32 plen; 806 u32 expected_len; 807 u32 respl = 0; 808 u32 snsl = 0; 809 u8 flags = 0; 810 811 plen = fr_len(fp); 812 fh = (struct fc_frame_header *)fr_hdr(fp); 813 if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp))) 814 goto len_err; 815 plen -= sizeof(*fh); 816 fc_rp = (struct fcp_resp *)(fh + 1); 817 fsp->cdb_status = fc_rp->fr_status; 818 flags = fc_rp->fr_flags; 819 fsp->scsi_comp_flags = flags; 820 expected_len = fsp->data_len; 821 822 /* if ddp, update xfer len */ 823 fc_fcp_ddp_done(fsp); 824 825 if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) { 826 rp_ex = (void *)(fc_rp + 1); 827 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) { 828 if (plen < sizeof(*fc_rp) + sizeof(*rp_ex)) 829 goto len_err; 830 fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1); 831 if (flags & FCP_RSP_LEN_VAL) { 832 respl = ntohl(rp_ex->fr_rsp_len); 833 if (respl != sizeof(*fc_rp_info)) 834 goto len_err; 835 if (fsp->wait_for_comp) { 836 /* Abuse cdb_status for rsp code */ 837 fsp->cdb_status = fc_rp_info->rsp_code; 838 complete(&fsp->tm_done); 839 /* 840 * tmfs will not have any scsi cmd so 841 * exit here 842 */ 843 return; 844 } 845 } 846 if (flags & FCP_SNS_LEN_VAL) { 847 snsl = ntohl(rp_ex->fr_sns_len); 848 if (snsl > SCSI_SENSE_BUFFERSIZE) 849 snsl = SCSI_SENSE_BUFFERSIZE; 850 memcpy(fsp->cmd->sense_buffer, 851 (char *)fc_rp_info + respl, snsl); 852 } 853 } 854 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) { 855 if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid)) 856 goto len_err; 857 if (flags & FCP_RESID_UNDER) { 858 fsp->scsi_resid = ntohl(rp_ex->fr_resid); 859 /* 860 * The cmnd->underflow is the minimum number of 861 * bytes that must be transfered for this 862 * command. Provided a sense condition is not 863 * present, make sure the actual amount 864 * transferred is at least the underflow value 865 * or fail. 866 */ 867 if (!(flags & FCP_SNS_LEN_VAL) && 868 (fc_rp->fr_status == 0) && 869 (scsi_bufflen(fsp->cmd) - 870 fsp->scsi_resid) < fsp->cmd->underflow) 871 goto err; 872 expected_len -= fsp->scsi_resid; 873 } else { 874 fsp->status_code = FC_ERROR; 875 } 876 } 877 } 878 fsp->state |= FC_SRB_RCV_STATUS; 879 880 /* 881 * Check for missing or extra data frames. 882 */ 883 if (unlikely(fsp->xfer_len != expected_len)) { 884 if (fsp->xfer_len < expected_len) { 885 /* 886 * Some data may be queued locally, 887 * Wait a at least one jiffy to see if it is delivered. 888 * If this expires without data, we may do SRR. 889 */ 890 fc_fcp_timer_set(fsp, 2); 891 return; 892 } 893 fsp->status_code = FC_DATA_OVRRUN; 894 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, " 895 "len %x, data len %x\n", 896 fsp->rport->port_id, 897 fsp->xfer_len, expected_len, fsp->data_len); 898 } 899 fc_fcp_complete_locked(fsp); 900 return; 901 902 len_err: 903 FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u " 904 "snsl %u\n", flags, fr_len(fp), respl, snsl); 905 err: 906 fsp->status_code = FC_ERROR; 907 fc_fcp_complete_locked(fsp); 908 } 909 910 /** 911 * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the 912 * fcp_pkt lock held 913 * @fsp: The FCP packet to be completed 914 * 915 * This function may sleep if a timer is pending. The packet lock must be 916 * held, and the host lock must not be held. 917 */ 918 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp) 919 { 920 struct fc_lport *lport = fsp->lp; 921 struct fc_seq *seq; 922 struct fc_exch *ep; 923 u32 f_ctl; 924 925 if (fsp->state & FC_SRB_ABORT_PENDING) 926 return; 927 928 if (fsp->state & FC_SRB_ABORTED) { 929 if (!fsp->status_code) 930 fsp->status_code = FC_CMD_ABORTED; 931 } else { 932 /* 933 * Test for transport underrun, independent of response 934 * underrun status. 935 */ 936 if (fsp->xfer_len < fsp->data_len && !fsp->io_status && 937 (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) || 938 fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) { 939 fsp->status_code = FC_DATA_UNDRUN; 940 fsp->io_status = 0; 941 } 942 } 943 944 seq = fsp->seq_ptr; 945 if (seq) { 946 fsp->seq_ptr = NULL; 947 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) { 948 struct fc_frame *conf_frame; 949 struct fc_seq *csp; 950 951 csp = lport->tt.seq_start_next(seq); 952 conf_frame = fc_fcp_frame_alloc(fsp->lp, 0); 953 if (conf_frame) { 954 f_ctl = FC_FC_SEQ_INIT; 955 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ; 956 ep = fc_seq_exch(seq); 957 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL, 958 ep->did, ep->sid, 959 FC_TYPE_FCP, f_ctl, 0); 960 lport->tt.seq_send(lport, csp, conf_frame); 961 } 962 } 963 lport->tt.exch_done(seq); 964 } 965 fc_io_compl(fsp); 966 } 967 968 /** 969 * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt 970 * @fsp: The FCP packet whose exchanges should be canceled 971 * @error: The reason for the cancellation 972 */ 973 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error) 974 { 975 struct fc_lport *lport = fsp->lp; 976 977 if (fsp->seq_ptr) { 978 lport->tt.exch_done(fsp->seq_ptr); 979 fsp->seq_ptr = NULL; 980 } 981 fsp->status_code = error; 982 } 983 984 /** 985 * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port 986 * @lport: The local port whose exchanges should be canceled 987 * @id: The target's ID 988 * @lun: The LUN 989 * @error: The reason for cancellation 990 * 991 * If lun or id is -1, they are ignored. 992 */ 993 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id, 994 unsigned int lun, int error) 995 { 996 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 997 struct fc_fcp_pkt *fsp; 998 struct scsi_cmnd *sc_cmd; 999 unsigned long flags; 1000 1001 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1002 restart: 1003 list_for_each_entry(fsp, &si->scsi_pkt_queue, list) { 1004 sc_cmd = fsp->cmd; 1005 if (id != -1 && scmd_id(sc_cmd) != id) 1006 continue; 1007 1008 if (lun != -1 && sc_cmd->device->lun != lun) 1009 continue; 1010 1011 fc_fcp_pkt_hold(fsp); 1012 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1013 1014 if (!fc_fcp_lock_pkt(fsp)) { 1015 fc_fcp_cleanup_cmd(fsp, error); 1016 fc_io_compl(fsp); 1017 fc_fcp_unlock_pkt(fsp); 1018 } 1019 1020 fc_fcp_pkt_release(fsp); 1021 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1022 /* 1023 * while we dropped the lock multiple pkts could 1024 * have been released, so we have to start over. 1025 */ 1026 goto restart; 1027 } 1028 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1029 } 1030 1031 /** 1032 * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port 1033 * @lport: The local port whose exchanges are to be aborted 1034 */ 1035 static void fc_fcp_abort_io(struct fc_lport *lport) 1036 { 1037 fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR); 1038 } 1039 1040 /** 1041 * fc_fcp_pkt_send() - Send a fcp_pkt 1042 * @lport: The local port to send the FCP packet on 1043 * @fsp: The FCP packet to send 1044 * 1045 * Return: Zero for success and -1 for failure 1046 * Locks: Called without locks held 1047 */ 1048 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp) 1049 { 1050 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 1051 unsigned long flags; 1052 int rc; 1053 1054 fsp->cmd->SCp.ptr = (char *)fsp; 1055 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len); 1056 fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK; 1057 1058 int_to_scsilun(fsp->cmd->device->lun, 1059 (struct scsi_lun *)fsp->cdb_cmd.fc_lun); 1060 memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len); 1061 1062 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1063 list_add_tail(&fsp->list, &si->scsi_pkt_queue); 1064 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1065 rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv); 1066 if (unlikely(rc)) { 1067 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1068 list_del(&fsp->list); 1069 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1070 } 1071 1072 return rc; 1073 } 1074 1075 /** 1076 * fc_fcp_cmd_send() - Send a FCP command 1077 * @lport: The local port to send the command on 1078 * @fsp: The FCP packet the command is on 1079 * @resp: The handler for the response 1080 */ 1081 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp, 1082 void (*resp)(struct fc_seq *, 1083 struct fc_frame *fp, 1084 void *arg)) 1085 { 1086 struct fc_frame *fp; 1087 struct fc_seq *seq; 1088 struct fc_rport *rport; 1089 struct fc_rport_libfc_priv *rpriv; 1090 const size_t len = sizeof(fsp->cdb_cmd); 1091 int rc = 0; 1092 1093 if (fc_fcp_lock_pkt(fsp)) 1094 return 0; 1095 1096 fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd)); 1097 if (!fp) { 1098 rc = -1; 1099 goto unlock; 1100 } 1101 1102 memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len); 1103 fr_fsp(fp) = fsp; 1104 rport = fsp->rport; 1105 fsp->max_payload = rport->maxframe_size; 1106 rpriv = rport->dd_data; 1107 1108 fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id, 1109 rpriv->local_port->port_id, FC_TYPE_FCP, 1110 FC_FCTL_REQ, 0); 1111 1112 seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, 1113 fsp, 0); 1114 if (!seq) { 1115 rc = -1; 1116 goto unlock; 1117 } 1118 fsp->last_pkt_time = jiffies; 1119 fsp->seq_ptr = seq; 1120 fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */ 1121 1122 setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp); 1123 fc_fcp_timer_set(fsp, 1124 (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ? 1125 FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT); 1126 unlock: 1127 fc_fcp_unlock_pkt(fsp); 1128 return rc; 1129 } 1130 1131 /** 1132 * fc_fcp_error() - Handler for FCP layer errors 1133 * @fsp: The FCP packet the error is on 1134 * @fp: The frame that has errored 1135 */ 1136 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 1137 { 1138 int error = PTR_ERR(fp); 1139 1140 if (fc_fcp_lock_pkt(fsp)) 1141 return; 1142 1143 if (error == -FC_EX_CLOSED) { 1144 fc_fcp_retry_cmd(fsp); 1145 goto unlock; 1146 } 1147 1148 /* 1149 * clear abort pending, because the lower layer 1150 * decided to force completion. 1151 */ 1152 fsp->state &= ~FC_SRB_ABORT_PENDING; 1153 fsp->status_code = FC_CMD_PLOGO; 1154 fc_fcp_complete_locked(fsp); 1155 unlock: 1156 fc_fcp_unlock_pkt(fsp); 1157 } 1158 1159 /** 1160 * fc_fcp_pkt_abort() - Abort a fcp_pkt 1161 * @fsp: The FCP packet to abort on 1162 * 1163 * Called to send an abort and then wait for abort completion 1164 */ 1165 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp) 1166 { 1167 int rc = FAILED; 1168 1169 if (fc_fcp_send_abort(fsp)) 1170 return FAILED; 1171 1172 init_completion(&fsp->tm_done); 1173 fsp->wait_for_comp = 1; 1174 1175 spin_unlock_bh(&fsp->scsi_pkt_lock); 1176 rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV); 1177 spin_lock_bh(&fsp->scsi_pkt_lock); 1178 fsp->wait_for_comp = 0; 1179 1180 if (!rc) { 1181 FC_FCP_DBG(fsp, "target abort cmd failed\n"); 1182 rc = FAILED; 1183 } else if (fsp->state & FC_SRB_ABORTED) { 1184 FC_FCP_DBG(fsp, "target abort cmd passed\n"); 1185 rc = SUCCESS; 1186 fc_fcp_complete_locked(fsp); 1187 } 1188 1189 return rc; 1190 } 1191 1192 /** 1193 * fc_lun_reset_send() - Send LUN reset command 1194 * @data: The FCP packet that identifies the LUN to be reset 1195 */ 1196 static void fc_lun_reset_send(unsigned long data) 1197 { 1198 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data; 1199 struct fc_lport *lport = fsp->lp; 1200 if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) { 1201 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY) 1202 return; 1203 if (fc_fcp_lock_pkt(fsp)) 1204 return; 1205 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp); 1206 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); 1207 fc_fcp_unlock_pkt(fsp); 1208 } 1209 } 1210 1211 /** 1212 * fc_lun_reset() - Send a LUN RESET command to a device 1213 * and wait for the reply 1214 * @lport: The local port to sent the comand on 1215 * @fsp: The FCP packet that identifies the LUN to be reset 1216 * @id: The SCSI command ID 1217 * @lun: The LUN ID to be reset 1218 */ 1219 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp, 1220 unsigned int id, unsigned int lun) 1221 { 1222 int rc; 1223 1224 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len); 1225 fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET; 1226 int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun); 1227 1228 fsp->wait_for_comp = 1; 1229 init_completion(&fsp->tm_done); 1230 1231 fc_lun_reset_send((unsigned long)fsp); 1232 1233 /* 1234 * wait for completion of reset 1235 * after that make sure all commands are terminated 1236 */ 1237 rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV); 1238 1239 spin_lock_bh(&fsp->scsi_pkt_lock); 1240 fsp->state |= FC_SRB_COMPL; 1241 spin_unlock_bh(&fsp->scsi_pkt_lock); 1242 1243 del_timer_sync(&fsp->timer); 1244 1245 spin_lock_bh(&fsp->scsi_pkt_lock); 1246 if (fsp->seq_ptr) { 1247 lport->tt.exch_done(fsp->seq_ptr); 1248 fsp->seq_ptr = NULL; 1249 } 1250 fsp->wait_for_comp = 0; 1251 spin_unlock_bh(&fsp->scsi_pkt_lock); 1252 1253 if (!rc) { 1254 FC_SCSI_DBG(lport, "lun reset failed\n"); 1255 return FAILED; 1256 } 1257 1258 /* cdb_status holds the tmf's rsp code */ 1259 if (fsp->cdb_status != FCP_TMF_CMPL) 1260 return FAILED; 1261 1262 FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun); 1263 fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED); 1264 return SUCCESS; 1265 } 1266 1267 /** 1268 * fc_tm_done() - Task Managment response handler 1269 * @seq: The sequence that the response is on 1270 * @fp: The response frame 1271 * @arg: The FCP packet the response is for 1272 */ 1273 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg) 1274 { 1275 struct fc_fcp_pkt *fsp = arg; 1276 struct fc_frame_header *fh; 1277 1278 if (IS_ERR(fp)) { 1279 /* 1280 * If there is an error just let it timeout or wait 1281 * for TMF to be aborted if it timedout. 1282 * 1283 * scsi-eh will escalate for when either happens. 1284 */ 1285 return; 1286 } 1287 1288 if (fc_fcp_lock_pkt(fsp)) 1289 return; 1290 1291 /* 1292 * raced with eh timeout handler. 1293 */ 1294 if (!fsp->seq_ptr || !fsp->wait_for_comp) { 1295 spin_unlock_bh(&fsp->scsi_pkt_lock); 1296 return; 1297 } 1298 1299 fh = fc_frame_header_get(fp); 1300 if (fh->fh_type != FC_TYPE_BLS) 1301 fc_fcp_resp(fsp, fp); 1302 fsp->seq_ptr = NULL; 1303 fsp->lp->tt.exch_done(seq); 1304 fc_frame_free(fp); 1305 fc_fcp_unlock_pkt(fsp); 1306 } 1307 1308 /** 1309 * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port 1310 * @lport: The local port to be cleaned up 1311 */ 1312 static void fc_fcp_cleanup(struct fc_lport *lport) 1313 { 1314 fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR); 1315 } 1316 1317 /** 1318 * fc_fcp_timeout() - Handler for fcp_pkt timeouts 1319 * @data: The FCP packet that has timed out 1320 * 1321 * If REC is supported then just issue it and return. The REC exchange will 1322 * complete or time out and recovery can continue at that point. Otherwise, 1323 * if the response has been received without all the data it has been 1324 * ER_TIMEOUT since the response was received. If the response has not been 1325 * received we see if data was received recently. If it has been then we 1326 * continue waiting, otherwise, we abort the command. 1327 */ 1328 static void fc_fcp_timeout(unsigned long data) 1329 { 1330 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data; 1331 struct fc_rport *rport = fsp->rport; 1332 struct fc_rport_libfc_priv *rpriv = rport->dd_data; 1333 1334 if (fc_fcp_lock_pkt(fsp)) 1335 return; 1336 1337 if (fsp->cdb_cmd.fc_tm_flags) 1338 goto unlock; 1339 1340 fsp->state |= FC_SRB_FCP_PROCESSING_TMO; 1341 1342 if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED) 1343 fc_fcp_rec(fsp); 1344 else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2), 1345 jiffies)) 1346 fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT); 1347 else if (fsp->state & FC_SRB_RCV_STATUS) 1348 fc_fcp_complete_locked(fsp); 1349 else 1350 fc_fcp_recovery(fsp); 1351 fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO; 1352 unlock: 1353 fc_fcp_unlock_pkt(fsp); 1354 } 1355 1356 /** 1357 * fc_fcp_rec() - Send a REC ELS request 1358 * @fsp: The FCP packet to send the REC request on 1359 */ 1360 static void fc_fcp_rec(struct fc_fcp_pkt *fsp) 1361 { 1362 struct fc_lport *lport; 1363 struct fc_frame *fp; 1364 struct fc_rport *rport; 1365 struct fc_rport_libfc_priv *rpriv; 1366 1367 lport = fsp->lp; 1368 rport = fsp->rport; 1369 rpriv = rport->dd_data; 1370 if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) { 1371 fsp->status_code = FC_HRD_ERROR; 1372 fsp->io_status = 0; 1373 fc_fcp_complete_locked(fsp); 1374 return; 1375 } 1376 fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec)); 1377 if (!fp) 1378 goto retry; 1379 1380 fr_seq(fp) = fsp->seq_ptr; 1381 fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id, 1382 rpriv->local_port->port_id, FC_TYPE_ELS, 1383 FC_FCTL_REQ, 0); 1384 if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC, 1385 fc_fcp_rec_resp, fsp, 1386 jiffies_to_msecs(FC_SCSI_REC_TOV))) { 1387 fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */ 1388 return; 1389 } 1390 retry: 1391 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) 1392 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); 1393 else 1394 fc_fcp_recovery(fsp); 1395 } 1396 1397 /** 1398 * fc_fcp_rec_resp() - Handler for REC ELS responses 1399 * @seq: The sequence the response is on 1400 * @fp: The response frame 1401 * @arg: The FCP packet the response is on 1402 * 1403 * If the response is a reject then the scsi layer will handle 1404 * the timeout. If the response is a LS_ACC then if the I/O was not completed 1405 * set the timeout and return. If the I/O was completed then complete the 1406 * exchange and tell the SCSI layer. 1407 */ 1408 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) 1409 { 1410 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; 1411 struct fc_els_rec_acc *recp; 1412 struct fc_els_ls_rjt *rjt; 1413 u32 e_stat; 1414 u8 opcode; 1415 u32 offset; 1416 enum dma_data_direction data_dir; 1417 enum fc_rctl r_ctl; 1418 struct fc_rport_libfc_priv *rpriv; 1419 1420 if (IS_ERR(fp)) { 1421 fc_fcp_rec_error(fsp, fp); 1422 return; 1423 } 1424 1425 if (fc_fcp_lock_pkt(fsp)) 1426 goto out; 1427 1428 fsp->recov_retry = 0; 1429 opcode = fc_frame_payload_op(fp); 1430 if (opcode == ELS_LS_RJT) { 1431 rjt = fc_frame_payload_get(fp, sizeof(*rjt)); 1432 switch (rjt->er_reason) { 1433 default: 1434 FC_FCP_DBG(fsp, "device %x unexpected REC reject " 1435 "reason %d expl %d\n", 1436 fsp->rport->port_id, rjt->er_reason, 1437 rjt->er_explan); 1438 /* fall through */ 1439 case ELS_RJT_UNSUP: 1440 FC_FCP_DBG(fsp, "device does not support REC\n"); 1441 rpriv = fsp->rport->dd_data; 1442 /* 1443 * if we do not spport RECs or got some bogus 1444 * reason then resetup timer so we check for 1445 * making progress. 1446 */ 1447 rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED; 1448 fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT); 1449 break; 1450 case ELS_RJT_LOGIC: 1451 case ELS_RJT_UNAB: 1452 /* 1453 * If no data transfer, the command frame got dropped 1454 * so we just retry. If data was transferred, we 1455 * lost the response but the target has no record, 1456 * so we abort and retry. 1457 */ 1458 if (rjt->er_explan == ELS_EXPL_OXID_RXID && 1459 fsp->xfer_len == 0) { 1460 fc_fcp_retry_cmd(fsp); 1461 break; 1462 } 1463 fc_fcp_recovery(fsp); 1464 break; 1465 } 1466 } else if (opcode == ELS_LS_ACC) { 1467 if (fsp->state & FC_SRB_ABORTED) 1468 goto unlock_out; 1469 1470 data_dir = fsp->cmd->sc_data_direction; 1471 recp = fc_frame_payload_get(fp, sizeof(*recp)); 1472 offset = ntohl(recp->reca_fc4value); 1473 e_stat = ntohl(recp->reca_e_stat); 1474 1475 if (e_stat & ESB_ST_COMPLETE) { 1476 1477 /* 1478 * The exchange is complete. 1479 * 1480 * For output, we must've lost the response. 1481 * For input, all data must've been sent. 1482 * We lost may have lost the response 1483 * (and a confirmation was requested) and maybe 1484 * some data. 1485 * 1486 * If all data received, send SRR 1487 * asking for response. If partial data received, 1488 * or gaps, SRR requests data at start of gap. 1489 * Recovery via SRR relies on in-order-delivery. 1490 */ 1491 if (data_dir == DMA_TO_DEVICE) { 1492 r_ctl = FC_RCTL_DD_CMD_STATUS; 1493 } else if (fsp->xfer_contig_end == offset) { 1494 r_ctl = FC_RCTL_DD_CMD_STATUS; 1495 } else { 1496 offset = fsp->xfer_contig_end; 1497 r_ctl = FC_RCTL_DD_SOL_DATA; 1498 } 1499 fc_fcp_srr(fsp, r_ctl, offset); 1500 } else if (e_stat & ESB_ST_SEQ_INIT) { 1501 1502 /* 1503 * The remote port has the initiative, so just 1504 * keep waiting for it to complete. 1505 */ 1506 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); 1507 } else { 1508 1509 /* 1510 * The exchange is incomplete, we have seq. initiative. 1511 * Lost response with requested confirmation, 1512 * lost confirmation, lost transfer ready or 1513 * lost write data. 1514 * 1515 * For output, if not all data was received, ask 1516 * for transfer ready to be repeated. 1517 * 1518 * If we received or sent all the data, send SRR to 1519 * request response. 1520 * 1521 * If we lost a response, we may have lost some read 1522 * data as well. 1523 */ 1524 r_ctl = FC_RCTL_DD_SOL_DATA; 1525 if (data_dir == DMA_TO_DEVICE) { 1526 r_ctl = FC_RCTL_DD_CMD_STATUS; 1527 if (offset < fsp->data_len) 1528 r_ctl = FC_RCTL_DD_DATA_DESC; 1529 } else if (offset == fsp->xfer_contig_end) { 1530 r_ctl = FC_RCTL_DD_CMD_STATUS; 1531 } else if (fsp->xfer_contig_end < offset) { 1532 offset = fsp->xfer_contig_end; 1533 } 1534 fc_fcp_srr(fsp, r_ctl, offset); 1535 } 1536 } 1537 unlock_out: 1538 fc_fcp_unlock_pkt(fsp); 1539 out: 1540 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */ 1541 fc_frame_free(fp); 1542 } 1543 1544 /** 1545 * fc_fcp_rec_error() - Handler for REC errors 1546 * @fsp: The FCP packet the error is on 1547 * @fp: The REC frame 1548 */ 1549 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 1550 { 1551 int error = PTR_ERR(fp); 1552 1553 if (fc_fcp_lock_pkt(fsp)) 1554 goto out; 1555 1556 switch (error) { 1557 case -FC_EX_CLOSED: 1558 fc_fcp_retry_cmd(fsp); 1559 break; 1560 1561 default: 1562 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n", 1563 fsp, fsp->rport->port_id, error); 1564 fsp->status_code = FC_CMD_PLOGO; 1565 /* fall through */ 1566 1567 case -FC_EX_TIMEOUT: 1568 /* 1569 * Assume REC or LS_ACC was lost. 1570 * The exchange manager will have aborted REC, so retry. 1571 */ 1572 FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n", 1573 fsp->rport->port_id, error, fsp->recov_retry, 1574 FC_MAX_RECOV_RETRY); 1575 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) 1576 fc_fcp_rec(fsp); 1577 else 1578 fc_fcp_recovery(fsp); 1579 break; 1580 } 1581 fc_fcp_unlock_pkt(fsp); 1582 out: 1583 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */ 1584 } 1585 1586 /** 1587 * fc_fcp_recovery() - Handler for fcp_pkt recovery 1588 * @fsp: The FCP pkt that needs to be aborted 1589 */ 1590 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp) 1591 { 1592 fsp->status_code = FC_CMD_RECOVERY; 1593 fsp->cdb_status = 0; 1594 fsp->io_status = 0; 1595 /* 1596 * if this fails then we let the scsi command timer fire and 1597 * scsi-ml escalate. 1598 */ 1599 fc_fcp_send_abort(fsp); 1600 } 1601 1602 /** 1603 * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request) 1604 * @fsp: The FCP packet the SRR is to be sent on 1605 * @r_ctl: The R_CTL field for the SRR request 1606 * This is called after receiving status but insufficient data, or 1607 * when expecting status but the request has timed out. 1608 */ 1609 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset) 1610 { 1611 struct fc_lport *lport = fsp->lp; 1612 struct fc_rport *rport; 1613 struct fc_rport_libfc_priv *rpriv; 1614 struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr); 1615 struct fc_seq *seq; 1616 struct fcp_srr *srr; 1617 struct fc_frame *fp; 1618 u8 cdb_op; 1619 1620 rport = fsp->rport; 1621 rpriv = rport->dd_data; 1622 cdb_op = fsp->cdb_cmd.fc_cdb[0]; 1623 1624 if (!(rpriv->flags & FC_RP_FLAGS_RETRY) || 1625 rpriv->rp_state != RPORT_ST_READY) 1626 goto retry; /* shouldn't happen */ 1627 fp = fc_fcp_frame_alloc(lport, sizeof(*srr)); 1628 if (!fp) 1629 goto retry; 1630 1631 srr = fc_frame_payload_get(fp, sizeof(*srr)); 1632 memset(srr, 0, sizeof(*srr)); 1633 srr->srr_op = ELS_SRR; 1634 srr->srr_ox_id = htons(ep->oxid); 1635 srr->srr_rx_id = htons(ep->rxid); 1636 srr->srr_r_ctl = r_ctl; 1637 srr->srr_rel_off = htonl(offset); 1638 1639 fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id, 1640 rpriv->local_port->port_id, FC_TYPE_FCP, 1641 FC_FCTL_REQ, 0); 1642 1643 seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL, 1644 fsp, jiffies_to_msecs(FC_SCSI_REC_TOV)); 1645 if (!seq) 1646 goto retry; 1647 1648 fsp->recov_seq = seq; 1649 fsp->xfer_len = offset; 1650 fsp->xfer_contig_end = offset; 1651 fsp->state &= ~FC_SRB_RCV_STATUS; 1652 fc_fcp_pkt_hold(fsp); /* hold for outstanding SRR */ 1653 return; 1654 retry: 1655 fc_fcp_retry_cmd(fsp); 1656 } 1657 1658 /** 1659 * fc_fcp_srr_resp() - Handler for SRR response 1660 * @seq: The sequence the SRR is on 1661 * @fp: The SRR frame 1662 * @arg: The FCP packet the SRR is on 1663 */ 1664 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) 1665 { 1666 struct fc_fcp_pkt *fsp = arg; 1667 struct fc_frame_header *fh; 1668 1669 if (IS_ERR(fp)) { 1670 fc_fcp_srr_error(fsp, fp); 1671 return; 1672 } 1673 1674 if (fc_fcp_lock_pkt(fsp)) 1675 goto out; 1676 1677 fh = fc_frame_header_get(fp); 1678 /* 1679 * BUG? fc_fcp_srr_error calls exch_done which would release 1680 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT, 1681 * then fc_exch_timeout would be sending an abort. The exch_done 1682 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing 1683 * an abort response though. 1684 */ 1685 if (fh->fh_type == FC_TYPE_BLS) { 1686 fc_fcp_unlock_pkt(fsp); 1687 return; 1688 } 1689 1690 fsp->recov_seq = NULL; 1691 switch (fc_frame_payload_op(fp)) { 1692 case ELS_LS_ACC: 1693 fsp->recov_retry = 0; 1694 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); 1695 break; 1696 case ELS_LS_RJT: 1697 default: 1698 fc_fcp_recovery(fsp); 1699 break; 1700 } 1701 fc_fcp_unlock_pkt(fsp); 1702 fsp->lp->tt.exch_done(seq); 1703 out: 1704 fc_frame_free(fp); 1705 fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ 1706 } 1707 1708 /** 1709 * fc_fcp_srr_error() - Handler for SRR errors 1710 * @fsp: The FCP packet that the SRR error is on 1711 * @fp: The SRR frame 1712 */ 1713 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) 1714 { 1715 if (fc_fcp_lock_pkt(fsp)) 1716 goto out; 1717 fsp->lp->tt.exch_done(fsp->recov_seq); 1718 fsp->recov_seq = NULL; 1719 switch (PTR_ERR(fp)) { 1720 case -FC_EX_TIMEOUT: 1721 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) 1722 fc_fcp_rec(fsp); 1723 else 1724 fc_fcp_recovery(fsp); 1725 break; 1726 case -FC_EX_CLOSED: /* e.g., link failure */ 1727 /* fall through */ 1728 default: 1729 fc_fcp_retry_cmd(fsp); 1730 break; 1731 } 1732 fc_fcp_unlock_pkt(fsp); 1733 out: 1734 fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ 1735 } 1736 1737 /** 1738 * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready 1739 * @lport: The local port to be checked 1740 */ 1741 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport) 1742 { 1743 /* lock ? */ 1744 return (lport->state == LPORT_ST_READY) && 1745 lport->link_up && !lport->qfull; 1746 } 1747 1748 /** 1749 * fc_queuecommand() - The queuecommand function of the SCSI template 1750 * @cmd: The scsi_cmnd to be executed 1751 * @done: The callback function to be called when the scsi_cmnd is complete 1752 * 1753 * This is the i/o strategy routine, called by the SCSI layer. This routine 1754 * is called with the host_lock held. 1755 */ 1756 int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) 1757 { 1758 struct fc_lport *lport; 1759 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); 1760 struct fc_fcp_pkt *fsp; 1761 struct fc_rport_libfc_priv *rpriv; 1762 int rval; 1763 int rc = 0; 1764 struct fcoe_dev_stats *stats; 1765 1766 lport = shost_priv(sc_cmd->device->host); 1767 1768 rval = fc_remote_port_chkready(rport); 1769 if (rval) { 1770 sc_cmd->result = rval; 1771 done(sc_cmd); 1772 return 0; 1773 } 1774 spin_unlock_irq(lport->host->host_lock); 1775 1776 if (!*(struct fc_remote_port **)rport->dd_data) { 1777 /* 1778 * rport is transitioning from blocked/deleted to 1779 * online 1780 */ 1781 sc_cmd->result = DID_IMM_RETRY << 16; 1782 done(sc_cmd); 1783 goto out; 1784 } 1785 1786 rpriv = rport->dd_data; 1787 1788 if (!fc_fcp_lport_queue_ready(lport)) { 1789 if (lport->qfull) 1790 fc_fcp_can_queue_ramp_down(lport); 1791 rc = SCSI_MLQUEUE_HOST_BUSY; 1792 goto out; 1793 } 1794 1795 fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC); 1796 if (fsp == NULL) { 1797 rc = SCSI_MLQUEUE_HOST_BUSY; 1798 goto out; 1799 } 1800 1801 /* 1802 * build the libfc request pkt 1803 */ 1804 fsp->cmd = sc_cmd; /* save the cmd */ 1805 fsp->lp = lport; /* save the softc ptr */ 1806 fsp->rport = rport; /* set the remote port ptr */ 1807 fsp->xfer_ddp = FC_XID_UNKNOWN; 1808 sc_cmd->scsi_done = done; 1809 1810 /* 1811 * set up the transfer length 1812 */ 1813 fsp->data_len = scsi_bufflen(sc_cmd); 1814 fsp->xfer_len = 0; 1815 1816 /* 1817 * setup the data direction 1818 */ 1819 stats = per_cpu_ptr(lport->dev_stats, get_cpu()); 1820 if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) { 1821 fsp->req_flags = FC_SRB_READ; 1822 stats->InputRequests++; 1823 stats->InputMegabytes = fsp->data_len; 1824 } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) { 1825 fsp->req_flags = FC_SRB_WRITE; 1826 stats->OutputRequests++; 1827 stats->OutputMegabytes = fsp->data_len; 1828 } else { 1829 fsp->req_flags = 0; 1830 stats->ControlRequests++; 1831 } 1832 put_cpu(); 1833 1834 fsp->tgt_flags = rpriv->flags; 1835 1836 init_timer(&fsp->timer); 1837 fsp->timer.data = (unsigned long)fsp; 1838 1839 /* 1840 * send it to the lower layer 1841 * if we get -1 return then put the request in the pending 1842 * queue. 1843 */ 1844 rval = fc_fcp_pkt_send(lport, fsp); 1845 if (rval != 0) { 1846 fsp->state = FC_SRB_FREE; 1847 fc_fcp_pkt_release(fsp); 1848 rc = SCSI_MLQUEUE_HOST_BUSY; 1849 } 1850 out: 1851 spin_lock_irq(lport->host->host_lock); 1852 return rc; 1853 } 1854 EXPORT_SYMBOL(fc_queuecommand); 1855 1856 /** 1857 * fc_io_compl() - Handle responses for completed commands 1858 * @fsp: The FCP packet that is complete 1859 * 1860 * Translates fcp_pkt errors to a Linux SCSI errors. 1861 * The fcp packet lock must be held when calling. 1862 */ 1863 static void fc_io_compl(struct fc_fcp_pkt *fsp) 1864 { 1865 struct fc_fcp_internal *si; 1866 struct scsi_cmnd *sc_cmd; 1867 struct fc_lport *lport; 1868 unsigned long flags; 1869 1870 /* release outstanding ddp context */ 1871 fc_fcp_ddp_done(fsp); 1872 1873 fsp->state |= FC_SRB_COMPL; 1874 if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) { 1875 spin_unlock_bh(&fsp->scsi_pkt_lock); 1876 del_timer_sync(&fsp->timer); 1877 spin_lock_bh(&fsp->scsi_pkt_lock); 1878 } 1879 1880 lport = fsp->lp; 1881 si = fc_get_scsi_internal(lport); 1882 1883 /* 1884 * if can_queue ramp down is done then try can_queue ramp up 1885 * since commands are completing now. 1886 */ 1887 if (si->last_can_queue_ramp_down_time) 1888 fc_fcp_can_queue_ramp_up(lport); 1889 1890 sc_cmd = fsp->cmd; 1891 CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status; 1892 switch (fsp->status_code) { 1893 case FC_COMPLETE: 1894 if (fsp->cdb_status == 0) { 1895 /* 1896 * good I/O status 1897 */ 1898 sc_cmd->result = DID_OK << 16; 1899 if (fsp->scsi_resid) 1900 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; 1901 } else { 1902 /* 1903 * transport level I/O was ok but scsi 1904 * has non zero status 1905 */ 1906 sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; 1907 } 1908 break; 1909 case FC_ERROR: 1910 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1911 "due to FC_ERROR\n"); 1912 sc_cmd->result = DID_ERROR << 16; 1913 break; 1914 case FC_DATA_UNDRUN: 1915 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) { 1916 /* 1917 * scsi status is good but transport level 1918 * underrun. 1919 */ 1920 if (fsp->state & FC_SRB_RCV_STATUS) { 1921 sc_cmd->result = DID_OK << 16; 1922 } else { 1923 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml" 1924 " due to FC_DATA_UNDRUN (trans)\n"); 1925 sc_cmd->result = DID_ERROR << 16; 1926 } 1927 } else { 1928 /* 1929 * scsi got underrun, this is an error 1930 */ 1931 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1932 "due to FC_DATA_UNDRUN (scsi)\n"); 1933 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; 1934 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; 1935 } 1936 break; 1937 case FC_DATA_OVRRUN: 1938 /* 1939 * overrun is an error 1940 */ 1941 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1942 "due to FC_DATA_OVRRUN\n"); 1943 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; 1944 break; 1945 case FC_CMD_ABORTED: 1946 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1947 "due to FC_CMD_ABORTED\n"); 1948 sc_cmd->result = (DID_ERROR << 16) | fsp->io_status; 1949 break; 1950 case FC_CMD_RECOVERY: 1951 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status; 1952 break; 1953 case FC_CMD_RESET: 1954 sc_cmd->result = (DID_RESET << 16); 1955 break; 1956 case FC_HRD_ERROR: 1957 sc_cmd->result = (DID_NO_CONNECT << 16); 1958 break; 1959 default: 1960 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " 1961 "due to unknown error\n"); 1962 sc_cmd->result = (DID_ERROR << 16); 1963 break; 1964 } 1965 1966 if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE) 1967 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16); 1968 1969 spin_lock_irqsave(&si->scsi_queue_lock, flags); 1970 list_del(&fsp->list); 1971 sc_cmd->SCp.ptr = NULL; 1972 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 1973 sc_cmd->scsi_done(sc_cmd); 1974 1975 /* release ref from initial allocation in queue command */ 1976 fc_fcp_pkt_release(fsp); 1977 } 1978 1979 /** 1980 * fc_eh_abort() - Abort a command 1981 * @sc_cmd: The SCSI command to abort 1982 * 1983 * From SCSI host template. 1984 * Send an ABTS to the target device and wait for the response. 1985 */ 1986 int fc_eh_abort(struct scsi_cmnd *sc_cmd) 1987 { 1988 struct fc_fcp_pkt *fsp; 1989 struct fc_lport *lport; 1990 struct fc_fcp_internal *si; 1991 int rc = FAILED; 1992 unsigned long flags; 1993 1994 lport = shost_priv(sc_cmd->device->host); 1995 if (lport->state != LPORT_ST_READY) 1996 return rc; 1997 else if (!lport->link_up) 1998 return rc; 1999 2000 si = fc_get_scsi_internal(lport); 2001 spin_lock_irqsave(&si->scsi_queue_lock, flags); 2002 fsp = CMD_SP(sc_cmd); 2003 if (!fsp) { 2004 /* command completed while scsi eh was setting up */ 2005 spin_unlock_irqrestore(lport->host->host_lock, flags); 2006 return SUCCESS; 2007 } 2008 /* grab a ref so the fsp and sc_cmd cannot be relased from under us */ 2009 fc_fcp_pkt_hold(fsp); 2010 spin_unlock_irqrestore(&si->scsi_queue_lock, flags); 2011 2012 if (fc_fcp_lock_pkt(fsp)) { 2013 /* completed while we were waiting for timer to be deleted */ 2014 rc = SUCCESS; 2015 goto release_pkt; 2016 } 2017 2018 rc = fc_fcp_pkt_abort(fsp); 2019 fc_fcp_unlock_pkt(fsp); 2020 2021 release_pkt: 2022 fc_fcp_pkt_release(fsp); 2023 return rc; 2024 } 2025 EXPORT_SYMBOL(fc_eh_abort); 2026 2027 /** 2028 * fc_eh_device_reset() - Reset a single LUN 2029 * @sc_cmd: The SCSI command which identifies the device whose 2030 * LUN is to be reset 2031 * 2032 * Set from SCSI host template. 2033 */ 2034 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd) 2035 { 2036 struct fc_lport *lport; 2037 struct fc_fcp_pkt *fsp; 2038 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); 2039 int rc = FAILED; 2040 int rval; 2041 2042 rval = fc_remote_port_chkready(rport); 2043 if (rval) 2044 goto out; 2045 2046 lport = shost_priv(sc_cmd->device->host); 2047 2048 if (lport->state != LPORT_ST_READY) 2049 return rc; 2050 2051 FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id); 2052 2053 fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO); 2054 if (fsp == NULL) { 2055 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n"); 2056 goto out; 2057 } 2058 2059 /* 2060 * Build the libfc request pkt. Do not set the scsi cmnd, because 2061 * the sc passed in is not setup for execution like when sent 2062 * through the queuecommand callout. 2063 */ 2064 fsp->lp = lport; /* save the softc ptr */ 2065 fsp->rport = rport; /* set the remote port ptr */ 2066 2067 /* 2068 * flush outstanding commands 2069 */ 2070 rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun); 2071 fsp->state = FC_SRB_FREE; 2072 fc_fcp_pkt_release(fsp); 2073 2074 out: 2075 return rc; 2076 } 2077 EXPORT_SYMBOL(fc_eh_device_reset); 2078 2079 /** 2080 * fc_eh_host_reset() - Reset a Scsi_Host. 2081 * @sc_cmd: The SCSI command that identifies the SCSI host to be reset 2082 */ 2083 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) 2084 { 2085 struct Scsi_Host *shost = sc_cmd->device->host; 2086 struct fc_lport *lport = shost_priv(shost); 2087 unsigned long wait_tmo; 2088 2089 FC_SCSI_DBG(lport, "Resetting host\n"); 2090 2091 lport->tt.lport_reset(lport); 2092 wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT; 2093 while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies, 2094 wait_tmo)) 2095 msleep(1000); 2096 2097 if (fc_fcp_lport_queue_ready(lport)) { 2098 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded " 2099 "on port (%6.6x)\n", lport->port_id); 2100 return SUCCESS; 2101 } else { 2102 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, " 2103 "port (%6.6x) is not ready.\n", 2104 lport->port_id); 2105 return FAILED; 2106 } 2107 } 2108 EXPORT_SYMBOL(fc_eh_host_reset); 2109 2110 /** 2111 * fc_slave_alloc() - Configure the queue depth of a Scsi_Host 2112 * @sdev: The SCSI device that identifies the SCSI host 2113 * 2114 * Configures queue depth based on host's cmd_per_len. If not set 2115 * then we use the libfc default. 2116 */ 2117 int fc_slave_alloc(struct scsi_device *sdev) 2118 { 2119 struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); 2120 2121 if (!rport || fc_remote_port_chkready(rport)) 2122 return -ENXIO; 2123 2124 if (sdev->tagged_supported) 2125 scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH); 2126 else 2127 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), 2128 FC_FCP_DFLT_QUEUE_DEPTH); 2129 2130 return 0; 2131 } 2132 EXPORT_SYMBOL(fc_slave_alloc); 2133 2134 /** 2135 * fc_change_queue_depth() - Change a device's queue depth 2136 * @sdev: The SCSI device whose queue depth is to change 2137 * @qdepth: The new queue depth 2138 * @reason: The resason for the change 2139 */ 2140 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) 2141 { 2142 switch (reason) { 2143 case SCSI_QDEPTH_DEFAULT: 2144 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); 2145 break; 2146 case SCSI_QDEPTH_QFULL: 2147 scsi_track_queue_full(sdev, qdepth); 2148 break; 2149 case SCSI_QDEPTH_RAMP_UP: 2150 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); 2151 break; 2152 default: 2153 return -EOPNOTSUPP; 2154 } 2155 return sdev->queue_depth; 2156 } 2157 EXPORT_SYMBOL(fc_change_queue_depth); 2158 2159 /** 2160 * fc_change_queue_type() - Change a device's queue type 2161 * @sdev: The SCSI device whose queue depth is to change 2162 * @tag_type: Identifier for queue type 2163 */ 2164 int fc_change_queue_type(struct scsi_device *sdev, int tag_type) 2165 { 2166 if (sdev->tagged_supported) { 2167 scsi_set_tag_type(sdev, tag_type); 2168 if (tag_type) 2169 scsi_activate_tcq(sdev, sdev->queue_depth); 2170 else 2171 scsi_deactivate_tcq(sdev, sdev->queue_depth); 2172 } else 2173 tag_type = 0; 2174 2175 return tag_type; 2176 } 2177 EXPORT_SYMBOL(fc_change_queue_type); 2178 2179 /** 2180 * fc_fcp_destory() - Tear down the FCP layer for a given local port 2181 * @lport: The local port that no longer needs the FCP layer 2182 */ 2183 void fc_fcp_destroy(struct fc_lport *lport) 2184 { 2185 struct fc_fcp_internal *si = fc_get_scsi_internal(lport); 2186 2187 if (!list_empty(&si->scsi_pkt_queue)) 2188 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying " 2189 "port (%6.6x)\n", lport->port_id); 2190 2191 mempool_destroy(si->scsi_pkt_pool); 2192 kfree(si); 2193 lport->scsi_priv = NULL; 2194 } 2195 EXPORT_SYMBOL(fc_fcp_destroy); 2196 2197 int fc_setup_fcp() 2198 { 2199 int rc = 0; 2200 2201 scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt", 2202 sizeof(struct fc_fcp_pkt), 2203 0, SLAB_HWCACHE_ALIGN, NULL); 2204 if (!scsi_pkt_cachep) { 2205 printk(KERN_ERR "libfc: Unable to allocate SRB cache, " 2206 "module load failed!"); 2207 rc = -ENOMEM; 2208 } 2209 2210 return rc; 2211 } 2212 2213 void fc_destroy_fcp() 2214 { 2215 if (scsi_pkt_cachep) 2216 kmem_cache_destroy(scsi_pkt_cachep); 2217 } 2218 2219 /** 2220 * fc_fcp_init() - Initialize the FCP layer for a local port 2221 * @lport: The local port to initialize the exchange layer for 2222 */ 2223 int fc_fcp_init(struct fc_lport *lport) 2224 { 2225 int rc; 2226 struct fc_fcp_internal *si; 2227 2228 if (!lport->tt.fcp_cmd_send) 2229 lport->tt.fcp_cmd_send = fc_fcp_cmd_send; 2230 2231 if (!lport->tt.fcp_cleanup) 2232 lport->tt.fcp_cleanup = fc_fcp_cleanup; 2233 2234 if (!lport->tt.fcp_abort_io) 2235 lport->tt.fcp_abort_io = fc_fcp_abort_io; 2236 2237 si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL); 2238 if (!si) 2239 return -ENOMEM; 2240 lport->scsi_priv = si; 2241 si->max_can_queue = lport->host->can_queue; 2242 INIT_LIST_HEAD(&si->scsi_pkt_queue); 2243 spin_lock_init(&si->scsi_queue_lock); 2244 2245 si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep); 2246 if (!si->scsi_pkt_pool) { 2247 rc = -ENOMEM; 2248 goto free_internal; 2249 } 2250 return 0; 2251 2252 free_internal: 2253 kfree(si); 2254 return rc; 2255 } 2256 EXPORT_SYMBOL(fc_fcp_init); 2257