xref: /linux/drivers/scsi/libfc/fc_fcp.c (revision 60e13231561b3a4c5269bfa1ef6c0569ad6f28ec)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21 
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31 
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 
38 #include <scsi/fc/fc_fc2.h>
39 
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42 
43 #include "fc_libfc.h"
44 
45 static struct kmem_cache *scsi_pkt_cachep;
46 
47 /* SRB state definitions */
48 #define FC_SRB_FREE		0		/* cmd is free */
49 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
50 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
51 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
52 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
53 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
54 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
56 
57 #define FC_SRB_READ		(1 << 1)
58 #define FC_SRB_WRITE		(1 << 0)
59 
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
68 
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79 	mempool_t		*scsi_pkt_pool;
80 	spinlock_t		scsi_queue_lock;
81 	struct list_head	scsi_pkt_queue;
82 	unsigned long		last_can_queue_ramp_down_time;
83 	unsigned long		last_can_queue_ramp_up_time;
84 	int			max_can_queue;
85 };
86 
87 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
88 
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105 
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109 
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE		0
114 #define FC_CMD_ABORTED		1
115 #define FC_CMD_RESET		2
116 #define FC_CMD_PLOGO		3
117 #define FC_SNS_RCV		4
118 #define FC_TRANS_ERR		5
119 #define FC_DATA_OVRRUN		6
120 #define FC_DATA_UNDRUN		7
121 #define FC_ERROR		8
122 #define FC_HRD_ERROR		9
123 #define FC_CRC_ERROR		10
124 #define FC_TIMED_OUT		11
125 
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_TM_TOV		(10 * HZ)
130 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
131 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
132 
133 #define FC_MAX_ERROR_CNT	5
134 #define FC_MAX_RECOV_RETRY	3
135 
136 #define FC_FCP_DFLT_QUEUE_DEPTH 32
137 
138 /**
139  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
140  * @lport: The local port that the FCP packet is for
141  * @gfp:   GFP flags for allocation
142  *
143  * Return value: fcp_pkt structure or null on allocation failure.
144  * Context:	 Can be called from process context, no lock is required.
145  */
146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
147 {
148 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
149 	struct fc_fcp_pkt *fsp;
150 
151 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
152 	if (fsp) {
153 		memset(fsp, 0, sizeof(*fsp));
154 		fsp->lp = lport;
155 		fsp->xfer_ddp = FC_XID_UNKNOWN;
156 		atomic_set(&fsp->ref_cnt, 1);
157 		init_timer(&fsp->timer);
158 		INIT_LIST_HEAD(&fsp->list);
159 		spin_lock_init(&fsp->scsi_pkt_lock);
160 	}
161 	return fsp;
162 }
163 
164 /**
165  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
166  * @fsp: The FCP packet to be released
167  *
168  * Context: Can be called from process or interrupt context,
169  *	    no lock is required.
170  */
171 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
172 {
173 	if (atomic_dec_and_test(&fsp->ref_cnt)) {
174 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
175 
176 		mempool_free(fsp, si->scsi_pkt_pool);
177 	}
178 }
179 
180 /**
181  * fc_fcp_pkt_hold() - Hold a fcp_pkt
182  * @fsp: The FCP packet to be held
183  */
184 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
185 {
186 	atomic_inc(&fsp->ref_cnt);
187 }
188 
189 /**
190  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
191  * @seq: The sequence that the FCP packet is on (required by destructor API)
192  * @fsp: The FCP packet to be released
193  *
194  * This routine is called by a destructor callback in the exch_seq_send()
195  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
196  * argument even though it is not used by this routine.
197  *
198  * Context: No locking required.
199  */
200 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
201 {
202 	fc_fcp_pkt_release(fsp);
203 }
204 
205 /**
206  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
207  * @fsp: The FCP packet to be locked and incremented
208  *
209  * We should only return error if we return a command to SCSI-ml before
210  * getting a response. This can happen in cases where we send a abort, but
211  * do not wait for the response and the abort and command can be passing
212  * each other on the wire/network-layer.
213  *
214  * Note: this function locks the packet and gets a reference to allow
215  * callers to call the completion function while the lock is held and
216  * not have to worry about the packets refcount.
217  *
218  * TODO: Maybe we should just have callers grab/release the lock and
219  * have a function that they call to verify the fsp and grab a ref if
220  * needed.
221  */
222 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
223 {
224 	spin_lock_bh(&fsp->scsi_pkt_lock);
225 	if (fsp->state & FC_SRB_COMPL) {
226 		spin_unlock_bh(&fsp->scsi_pkt_lock);
227 		return -EPERM;
228 	}
229 
230 	fc_fcp_pkt_hold(fsp);
231 	return 0;
232 }
233 
234 /**
235  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
236  *			 reference count
237  * @fsp: The FCP packet to be unlocked and decremented
238  */
239 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
240 {
241 	spin_unlock_bh(&fsp->scsi_pkt_lock);
242 	fc_fcp_pkt_release(fsp);
243 }
244 
245 /**
246  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
247  * @fsp:   The FCP packet to start a timer for
248  * @delay: The timeout period in jiffies
249  */
250 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
251 {
252 	if (!(fsp->state & FC_SRB_COMPL))
253 		mod_timer(&fsp->timer, jiffies + delay);
254 }
255 
256 /**
257  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
258  *			 fcp_pkt
259  * @fsp: The FCP packet to abort exchanges on
260  */
261 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
262 {
263 	if (!fsp->seq_ptr)
264 		return -EINVAL;
265 
266 	fsp->state |= FC_SRB_ABORT_PENDING;
267 	return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
268 }
269 
270 /**
271  * fc_fcp_retry_cmd() - Retry a fcp_pkt
272  * @fsp: The FCP packet to be retried
273  *
274  * Sets the status code to be FC_ERROR and then calls
275  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
276  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
277  * The SCSI-ml will retry the command.
278  */
279 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
280 {
281 	if (fsp->seq_ptr) {
282 		fsp->lp->tt.exch_done(fsp->seq_ptr);
283 		fsp->seq_ptr = NULL;
284 	}
285 
286 	fsp->state &= ~FC_SRB_ABORT_PENDING;
287 	fsp->io_status = 0;
288 	fsp->status_code = FC_ERROR;
289 	fc_fcp_complete_locked(fsp);
290 }
291 
292 /**
293  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
294  * @fsp: The FCP packet that will manage the DDP frames
295  * @xid: The XID that will be used for the DDP exchange
296  */
297 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
298 {
299 	struct fc_lport *lport;
300 
301 	lport = fsp->lp;
302 	if ((fsp->req_flags & FC_SRB_READ) &&
303 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
304 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
305 					scsi_sg_count(fsp->cmd)))
306 			fsp->xfer_ddp = xid;
307 	}
308 }
309 
310 /**
311  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
312  *		       DDP related resources for a fcp_pkt
313  * @fsp: The FCP packet that DDP had been used on
314  */
315 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
316 {
317 	struct fc_lport *lport;
318 
319 	if (!fsp)
320 		return;
321 
322 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
323 		return;
324 
325 	lport = fsp->lp;
326 	if (lport->tt.ddp_done) {
327 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
328 		fsp->xfer_ddp = FC_XID_UNKNOWN;
329 	}
330 }
331 
332 /**
333  * fc_fcp_can_queue_ramp_up() - increases can_queue
334  * @lport: lport to ramp up can_queue
335  */
336 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
337 {
338 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
339 	unsigned long flags;
340 	int can_queue;
341 
342 	spin_lock_irqsave(lport->host->host_lock, flags);
343 
344 	if (si->last_can_queue_ramp_up_time &&
345 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
346 			 FC_CAN_QUEUE_PERIOD)))
347 		goto unlock;
348 
349 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
350 			FC_CAN_QUEUE_PERIOD))
351 		goto unlock;
352 
353 	si->last_can_queue_ramp_up_time = jiffies;
354 
355 	can_queue = lport->host->can_queue << 1;
356 	if (can_queue >= si->max_can_queue) {
357 		can_queue = si->max_can_queue;
358 		si->last_can_queue_ramp_down_time = 0;
359 	}
360 	lport->host->can_queue = can_queue;
361 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
362 		     "can_queue to %d.\n", can_queue);
363 
364 unlock:
365 	spin_unlock_irqrestore(lport->host->host_lock, flags);
366 }
367 
368 /**
369  * fc_fcp_can_queue_ramp_down() - reduces can_queue
370  * @lport: lport to reduce can_queue
371  *
372  * If we are getting memory allocation failures, then we may
373  * be trying to execute too many commands. We let the running
374  * commands complete or timeout, then try again with a reduced
375  * can_queue. Eventually we will hit the point where we run
376  * on all reserved structs.
377  */
378 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
379 {
380 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
381 	unsigned long flags;
382 	int can_queue;
383 
384 	spin_lock_irqsave(lport->host->host_lock, flags);
385 
386 	if (si->last_can_queue_ramp_down_time &&
387 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
388 			 FC_CAN_QUEUE_PERIOD)))
389 		goto unlock;
390 
391 	si->last_can_queue_ramp_down_time = jiffies;
392 
393 	can_queue = lport->host->can_queue;
394 	can_queue >>= 1;
395 	if (!can_queue)
396 		can_queue = 1;
397 	lport->host->can_queue = can_queue;
398 	shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
399 		     "Reducing can_queue to %d.\n", can_queue);
400 
401 unlock:
402 	spin_unlock_irqrestore(lport->host->host_lock, flags);
403 }
404 
405 /*
406  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
407  * @lport:	fc lport struct
408  * @len:	payload length
409  *
410  * Allocates fc_frame structure and buffer but if fails to allocate
411  * then reduce can_queue.
412  */
413 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
414 						  size_t len)
415 {
416 	struct fc_frame *fp;
417 
418 	fp = fc_frame_alloc(lport, len);
419 	if (likely(fp))
420 		return fp;
421 
422 	/* error case */
423 	fc_fcp_can_queue_ramp_down(lport);
424 	return NULL;
425 }
426 
427 /**
428  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
429  * @fsp: The FCP packet the data is on
430  * @fp:	 The data frame
431  */
432 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
433 {
434 	struct scsi_cmnd *sc = fsp->cmd;
435 	struct fc_lport *lport = fsp->lp;
436 	struct fcoe_dev_stats *stats;
437 	struct fc_frame_header *fh;
438 	size_t start_offset;
439 	size_t offset;
440 	u32 crc;
441 	u32 copy_len = 0;
442 	size_t len;
443 	void *buf;
444 	struct scatterlist *sg;
445 	u32 nents;
446 	u8 host_bcode = FC_COMPLETE;
447 
448 	fh = fc_frame_header_get(fp);
449 	offset = ntohl(fh->fh_parm_offset);
450 	start_offset = offset;
451 	len = fr_len(fp) - sizeof(*fh);
452 	buf = fc_frame_payload_get(fp, 0);
453 
454 	/*
455 	 * if this I/O is ddped then clear it and initiate recovery since data
456 	 * frames are expected to be placed directly in that case.
457 	 *
458 	 * Indicate error to scsi-ml because something went wrong with the
459 	 * ddp handling to get us here.
460 	 */
461 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
462 		fc_fcp_ddp_done(fsp);
463 		FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
464 		host_bcode = FC_ERROR;
465 		goto err;
466 	}
467 	if (offset + len > fsp->data_len) {
468 		/* this should never happen */
469 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
470 		    fc_frame_crc_check(fp))
471 			goto crc_err;
472 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
473 			   "data_len %x\n", len, offset, fsp->data_len);
474 
475 		/* Data is corrupted indicate scsi-ml should retry */
476 		host_bcode = FC_DATA_OVRRUN;
477 		goto err;
478 	}
479 	if (offset != fsp->xfer_len)
480 		fsp->state |= FC_SRB_DISCONTIG;
481 
482 	sg = scsi_sglist(sc);
483 	nents = scsi_sg_count(sc);
484 
485 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
486 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
487 						    &offset, KM_SOFTIRQ0, NULL);
488 	} else {
489 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
490 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
491 						    &offset, KM_SOFTIRQ0, &crc);
492 		buf = fc_frame_payload_get(fp, 0);
493 		if (len % 4)
494 			crc = crc32(crc, buf + len, 4 - (len % 4));
495 
496 		if (~crc != le32_to_cpu(fr_crc(fp))) {
497 crc_err:
498 			stats = per_cpu_ptr(lport->dev_stats, get_cpu());
499 			stats->ErrorFrames++;
500 			/* per cpu count, not total count, but OK for limit */
501 			if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
502 				printk(KERN_WARNING "libfc: CRC error on data "
503 				       "frame for port (%6.6x)\n",
504 				       lport->port_id);
505 			put_cpu();
506 			/*
507 			 * Assume the frame is total garbage.
508 			 * We may have copied it over the good part
509 			 * of the buffer.
510 			 * If so, we need to retry the entire operation.
511 			 * Otherwise, ignore it.
512 			 */
513 			if (fsp->state & FC_SRB_DISCONTIG) {
514 				host_bcode = FC_CRC_ERROR;
515 				goto err;
516 			}
517 			return;
518 		}
519 	}
520 
521 	if (fsp->xfer_contig_end == start_offset)
522 		fsp->xfer_contig_end += copy_len;
523 	fsp->xfer_len += copy_len;
524 
525 	/*
526 	 * In the very rare event that this data arrived after the response
527 	 * and completes the transfer, call the completion handler.
528 	 */
529 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
530 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
531 		fc_fcp_complete_locked(fsp);
532 	return;
533 err:
534 	fc_fcp_recovery(fsp, host_bcode);
535 }
536 
537 /**
538  * fc_fcp_send_data() - Send SCSI data to a target
539  * @fsp:      The FCP packet the data is on
540  * @sp:	      The sequence the data is to be sent on
541  * @offset:   The starting offset for this data request
542  * @seq_blen: The burst length for this data request
543  *
544  * Called after receiving a Transfer Ready data descriptor.
545  * If the LLD is capable of sequence offload then send down the
546  * seq_blen amount of data in single frame, otherwise send
547  * multiple frames of the maximum frame payload supported by
548  * the target port.
549  */
550 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
551 			    size_t offset, size_t seq_blen)
552 {
553 	struct fc_exch *ep;
554 	struct scsi_cmnd *sc;
555 	struct scatterlist *sg;
556 	struct fc_frame *fp = NULL;
557 	struct fc_lport *lport = fsp->lp;
558 	struct page *page;
559 	size_t remaining;
560 	size_t t_blen;
561 	size_t tlen;
562 	size_t sg_bytes;
563 	size_t frame_offset, fh_parm_offset;
564 	size_t off;
565 	int error;
566 	void *data = NULL;
567 	void *page_addr;
568 	int using_sg = lport->sg_supp;
569 	u32 f_ctl;
570 
571 	WARN_ON(seq_blen <= 0);
572 	if (unlikely(offset + seq_blen > fsp->data_len)) {
573 		/* this should never happen */
574 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
575 			   "offset %zx\n", seq_blen, offset);
576 		fc_fcp_send_abort(fsp);
577 		return 0;
578 	} else if (offset != fsp->xfer_len) {
579 		/* Out of Order Data Request - no problem, but unexpected. */
580 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
581 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
582 	}
583 
584 	/*
585 	 * if LLD is capable of seq_offload then set transport
586 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
587 	 * to max FC frame payload previously set in fsp->max_payload.
588 	 */
589 	t_blen = fsp->max_payload;
590 	if (lport->seq_offload) {
591 		t_blen = min(seq_blen, (size_t)lport->lso_max);
592 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
593 			   fsp, seq_blen, lport->lso_max, t_blen);
594 	}
595 
596 	if (t_blen > 512)
597 		t_blen &= ~(512 - 1);	/* round down to block size */
598 	sc = fsp->cmd;
599 
600 	remaining = seq_blen;
601 	fh_parm_offset = frame_offset = offset;
602 	tlen = 0;
603 	seq = lport->tt.seq_start_next(seq);
604 	f_ctl = FC_FC_REL_OFF;
605 	WARN_ON(!seq);
606 
607 	sg = scsi_sglist(sc);
608 
609 	while (remaining > 0 && sg) {
610 		if (offset >= sg->length) {
611 			offset -= sg->length;
612 			sg = sg_next(sg);
613 			continue;
614 		}
615 		if (!fp) {
616 			tlen = min(t_blen, remaining);
617 
618 			/*
619 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
620 			 * handle odd lengths in non-linear skbs.
621 			 * This will be the final fragment only.
622 			 */
623 			if (tlen % 4)
624 				using_sg = 0;
625 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
626 			if (!fp)
627 				return -ENOMEM;
628 
629 			data = fc_frame_header_get(fp) + 1;
630 			fh_parm_offset = frame_offset;
631 			fr_max_payload(fp) = fsp->max_payload;
632 		}
633 
634 		off = offset + sg->offset;
635 		sg_bytes = min(tlen, sg->length - offset);
636 		sg_bytes = min(sg_bytes,
637 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
638 		page = sg_page(sg) + (off >> PAGE_SHIFT);
639 		if (using_sg) {
640 			get_page(page);
641 			skb_fill_page_desc(fp_skb(fp),
642 					   skb_shinfo(fp_skb(fp))->nr_frags,
643 					   page, off & ~PAGE_MASK, sg_bytes);
644 			fp_skb(fp)->data_len += sg_bytes;
645 			fr_len(fp) += sg_bytes;
646 			fp_skb(fp)->truesize += PAGE_SIZE;
647 		} else {
648 			/*
649 			 * The scatterlist item may be bigger than PAGE_SIZE,
650 			 * but we must not cross pages inside the kmap.
651 			 */
652 			page_addr = kmap_atomic(page, KM_SOFTIRQ0);
653 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
654 			       sg_bytes);
655 			kunmap_atomic(page_addr, KM_SOFTIRQ0);
656 			data += sg_bytes;
657 		}
658 		offset += sg_bytes;
659 		frame_offset += sg_bytes;
660 		tlen -= sg_bytes;
661 		remaining -= sg_bytes;
662 
663 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
664 		    (tlen))
665 			continue;
666 
667 		/*
668 		 * Send sequence with transfer sequence initiative in case
669 		 * this is last FCP frame of the sequence.
670 		 */
671 		if (remaining == 0)
672 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
673 
674 		ep = fc_seq_exch(seq);
675 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
676 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
677 
678 		/*
679 		 * send fragment using for a sequence.
680 		 */
681 		error = lport->tt.seq_send(lport, seq, fp);
682 		if (error) {
683 			WARN_ON(1);		/* send error should be rare */
684 			return error;
685 		}
686 		fp = NULL;
687 	}
688 	fsp->xfer_len += seq_blen;	/* premature count? */
689 	return 0;
690 }
691 
692 /**
693  * fc_fcp_abts_resp() - Receive an ABTS response
694  * @fsp: The FCP packet that is being aborted
695  * @fp:	 The response frame
696  */
697 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
698 {
699 	int ba_done = 1;
700 	struct fc_ba_rjt *brp;
701 	struct fc_frame_header *fh;
702 
703 	fh = fc_frame_header_get(fp);
704 	switch (fh->fh_r_ctl) {
705 	case FC_RCTL_BA_ACC:
706 		break;
707 	case FC_RCTL_BA_RJT:
708 		brp = fc_frame_payload_get(fp, sizeof(*brp));
709 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
710 			break;
711 		/* fall thru */
712 	default:
713 		/*
714 		 * we will let the command timeout
715 		 * and scsi-ml recover in this case,
716 		 * therefore cleared the ba_done flag.
717 		 */
718 		ba_done = 0;
719 	}
720 
721 	if (ba_done) {
722 		fsp->state |= FC_SRB_ABORTED;
723 		fsp->state &= ~FC_SRB_ABORT_PENDING;
724 
725 		if (fsp->wait_for_comp)
726 			complete(&fsp->tm_done);
727 		else
728 			fc_fcp_complete_locked(fsp);
729 	}
730 }
731 
732 /**
733  * fc_fcp_recv() - Receive an FCP frame
734  * @seq: The sequence the frame is on
735  * @fp:	 The received frame
736  * @arg: The related FCP packet
737  *
738  * Context: Called from Soft IRQ context. Can not be called
739  *	    holding the FCP packet list lock.
740  */
741 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
742 {
743 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
744 	struct fc_lport *lport = fsp->lp;
745 	struct fc_frame_header *fh;
746 	struct fcp_txrdy *dd;
747 	u8 r_ctl;
748 	int rc = 0;
749 
750 	if (IS_ERR(fp)) {
751 		fc_fcp_error(fsp, fp);
752 		return;
753 	}
754 
755 	fh = fc_frame_header_get(fp);
756 	r_ctl = fh->fh_r_ctl;
757 
758 	if (lport->state != LPORT_ST_READY)
759 		goto out;
760 	if (fc_fcp_lock_pkt(fsp))
761 		goto out;
762 	fsp->last_pkt_time = jiffies;
763 
764 	if (fh->fh_type == FC_TYPE_BLS) {
765 		fc_fcp_abts_resp(fsp, fp);
766 		goto unlock;
767 	}
768 
769 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
770 		goto unlock;
771 
772 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
773 		/*
774 		 * received XFER RDY from the target
775 		 * need to send data to the target
776 		 */
777 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
778 		dd = fc_frame_payload_get(fp, sizeof(*dd));
779 		WARN_ON(!dd);
780 
781 		rc = fc_fcp_send_data(fsp, seq,
782 				      (size_t) ntohl(dd->ft_data_ro),
783 				      (size_t) ntohl(dd->ft_burst_len));
784 		if (!rc)
785 			seq->rec_data = fsp->xfer_len;
786 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
787 		/*
788 		 * received a DATA frame
789 		 * next we will copy the data to the system buffer
790 		 */
791 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
792 		fc_fcp_recv_data(fsp, fp);
793 		seq->rec_data = fsp->xfer_contig_end;
794 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
795 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
796 
797 		fc_fcp_resp(fsp, fp);
798 	} else {
799 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
800 	}
801 unlock:
802 	fc_fcp_unlock_pkt(fsp);
803 out:
804 	fc_frame_free(fp);
805 }
806 
807 /**
808  * fc_fcp_resp() - Handler for FCP responses
809  * @fsp: The FCP packet the response is for
810  * @fp:	 The response frame
811  */
812 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
813 {
814 	struct fc_frame_header *fh;
815 	struct fcp_resp *fc_rp;
816 	struct fcp_resp_ext *rp_ex;
817 	struct fcp_resp_rsp_info *fc_rp_info;
818 	u32 plen;
819 	u32 expected_len;
820 	u32 respl = 0;
821 	u32 snsl = 0;
822 	u8 flags = 0;
823 
824 	plen = fr_len(fp);
825 	fh = (struct fc_frame_header *)fr_hdr(fp);
826 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
827 		goto len_err;
828 	plen -= sizeof(*fh);
829 	fc_rp = (struct fcp_resp *)(fh + 1);
830 	fsp->cdb_status = fc_rp->fr_status;
831 	flags = fc_rp->fr_flags;
832 	fsp->scsi_comp_flags = flags;
833 	expected_len = fsp->data_len;
834 
835 	/* if ddp, update xfer len */
836 	fc_fcp_ddp_done(fsp);
837 
838 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
839 		rp_ex = (void *)(fc_rp + 1);
840 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
841 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
842 				goto len_err;
843 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
844 			if (flags & FCP_RSP_LEN_VAL) {
845 				respl = ntohl(rp_ex->fr_rsp_len);
846 				if (respl != sizeof(*fc_rp_info))
847 					goto len_err;
848 				if (fsp->wait_for_comp) {
849 					/* Abuse cdb_status for rsp code */
850 					fsp->cdb_status = fc_rp_info->rsp_code;
851 					complete(&fsp->tm_done);
852 					/*
853 					 * tmfs will not have any scsi cmd so
854 					 * exit here
855 					 */
856 					return;
857 				}
858 			}
859 			if (flags & FCP_SNS_LEN_VAL) {
860 				snsl = ntohl(rp_ex->fr_sns_len);
861 				if (snsl > SCSI_SENSE_BUFFERSIZE)
862 					snsl = SCSI_SENSE_BUFFERSIZE;
863 				memcpy(fsp->cmd->sense_buffer,
864 				       (char *)fc_rp_info + respl, snsl);
865 			}
866 		}
867 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
868 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
869 				goto len_err;
870 			if (flags & FCP_RESID_UNDER) {
871 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
872 				/*
873 				 * The cmnd->underflow is the minimum number of
874 				 * bytes that must be transferred for this
875 				 * command.  Provided a sense condition is not
876 				 * present, make sure the actual amount
877 				 * transferred is at least the underflow value
878 				 * or fail.
879 				 */
880 				if (!(flags & FCP_SNS_LEN_VAL) &&
881 				    (fc_rp->fr_status == 0) &&
882 				    (scsi_bufflen(fsp->cmd) -
883 				     fsp->scsi_resid) < fsp->cmd->underflow)
884 					goto err;
885 				expected_len -= fsp->scsi_resid;
886 			} else {
887 				fsp->status_code = FC_ERROR;
888 			}
889 		}
890 	}
891 	fsp->state |= FC_SRB_RCV_STATUS;
892 
893 	/*
894 	 * Check for missing or extra data frames.
895 	 */
896 	if (unlikely(fsp->xfer_len != expected_len)) {
897 		if (fsp->xfer_len < expected_len) {
898 			/*
899 			 * Some data may be queued locally,
900 			 * Wait a at least one jiffy to see if it is delivered.
901 			 * If this expires without data, we may do SRR.
902 			 */
903 			fc_fcp_timer_set(fsp, 2);
904 			return;
905 		}
906 		fsp->status_code = FC_DATA_OVRRUN;
907 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
908 			   "len %x, data len %x\n",
909 			   fsp->rport->port_id,
910 			   fsp->xfer_len, expected_len, fsp->data_len);
911 	}
912 	fc_fcp_complete_locked(fsp);
913 	return;
914 
915 len_err:
916 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
917 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
918 err:
919 	fsp->status_code = FC_ERROR;
920 	fc_fcp_complete_locked(fsp);
921 }
922 
923 /**
924  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
925  *			      fcp_pkt lock held
926  * @fsp: The FCP packet to be completed
927  *
928  * This function may sleep if a timer is pending. The packet lock must be
929  * held, and the host lock must not be held.
930  */
931 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
932 {
933 	struct fc_lport *lport = fsp->lp;
934 	struct fc_seq *seq;
935 	struct fc_exch *ep;
936 	u32 f_ctl;
937 
938 	if (fsp->state & FC_SRB_ABORT_PENDING)
939 		return;
940 
941 	if (fsp->state & FC_SRB_ABORTED) {
942 		if (!fsp->status_code)
943 			fsp->status_code = FC_CMD_ABORTED;
944 	} else {
945 		/*
946 		 * Test for transport underrun, independent of response
947 		 * underrun status.
948 		 */
949 		if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
950 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
951 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
952 			fsp->status_code = FC_DATA_UNDRUN;
953 			fsp->io_status = 0;
954 		}
955 	}
956 
957 	seq = fsp->seq_ptr;
958 	if (seq) {
959 		fsp->seq_ptr = NULL;
960 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
961 			struct fc_frame *conf_frame;
962 			struct fc_seq *csp;
963 
964 			csp = lport->tt.seq_start_next(seq);
965 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
966 			if (conf_frame) {
967 				f_ctl = FC_FC_SEQ_INIT;
968 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
969 				ep = fc_seq_exch(seq);
970 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
971 					       ep->did, ep->sid,
972 					       FC_TYPE_FCP, f_ctl, 0);
973 				lport->tt.seq_send(lport, csp, conf_frame);
974 			}
975 		}
976 		lport->tt.exch_done(seq);
977 	}
978 	/*
979 	 * Some resets driven by SCSI are not I/Os and do not have
980 	 * SCSI commands associated with the requests. We should not
981 	 * call I/O completion if we do not have a SCSI command.
982 	 */
983 	if (fsp->cmd)
984 		fc_io_compl(fsp);
985 }
986 
987 /**
988  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
989  * @fsp:   The FCP packet whose exchanges should be canceled
990  * @error: The reason for the cancellation
991  */
992 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
993 {
994 	struct fc_lport *lport = fsp->lp;
995 
996 	if (fsp->seq_ptr) {
997 		lport->tt.exch_done(fsp->seq_ptr);
998 		fsp->seq_ptr = NULL;
999 	}
1000 	fsp->status_code = error;
1001 }
1002 
1003 /**
1004  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1005  * @lport: The local port whose exchanges should be canceled
1006  * @id:	   The target's ID
1007  * @lun:   The LUN
1008  * @error: The reason for cancellation
1009  *
1010  * If lun or id is -1, they are ignored.
1011  */
1012 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1013 				    unsigned int lun, int error)
1014 {
1015 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1016 	struct fc_fcp_pkt *fsp;
1017 	struct scsi_cmnd *sc_cmd;
1018 	unsigned long flags;
1019 
1020 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1021 restart:
1022 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1023 		sc_cmd = fsp->cmd;
1024 		if (id != -1 && scmd_id(sc_cmd) != id)
1025 			continue;
1026 
1027 		if (lun != -1 && sc_cmd->device->lun != lun)
1028 			continue;
1029 
1030 		fc_fcp_pkt_hold(fsp);
1031 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1032 
1033 		if (!fc_fcp_lock_pkt(fsp)) {
1034 			fc_fcp_cleanup_cmd(fsp, error);
1035 			fc_io_compl(fsp);
1036 			fc_fcp_unlock_pkt(fsp);
1037 		}
1038 
1039 		fc_fcp_pkt_release(fsp);
1040 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1041 		/*
1042 		 * while we dropped the lock multiple pkts could
1043 		 * have been released, so we have to start over.
1044 		 */
1045 		goto restart;
1046 	}
1047 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1048 }
1049 
1050 /**
1051  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1052  * @lport: The local port whose exchanges are to be aborted
1053  */
1054 static void fc_fcp_abort_io(struct fc_lport *lport)
1055 {
1056 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1057 }
1058 
1059 /**
1060  * fc_fcp_pkt_send() - Send a fcp_pkt
1061  * @lport: The local port to send the FCP packet on
1062  * @fsp:   The FCP packet to send
1063  *
1064  * Return:  Zero for success and -1 for failure
1065  * Locks:   Called without locks held
1066  */
1067 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1068 {
1069 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1070 	unsigned long flags;
1071 	int rc;
1072 
1073 	fsp->cmd->SCp.ptr = (char *)fsp;
1074 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1075 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1076 
1077 	int_to_scsilun(fsp->cmd->device->lun,
1078 		       (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1079 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1080 
1081 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1082 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1083 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1084 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1085 	if (unlikely(rc)) {
1086 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1087 		fsp->cmd->SCp.ptr = NULL;
1088 		list_del(&fsp->list);
1089 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1090 	}
1091 
1092 	return rc;
1093 }
1094 
1095 /**
1096  * get_fsp_rec_tov() - Helper function to get REC_TOV
1097  * @fsp: the FCP packet
1098  *
1099  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
1100  */
1101 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1102 {
1103 	struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
1104 
1105 	return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
1106 }
1107 
1108 /**
1109  * fc_fcp_cmd_send() - Send a FCP command
1110  * @lport: The local port to send the command on
1111  * @fsp:   The FCP packet the command is on
1112  * @resp:  The handler for the response
1113  */
1114 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1115 			   void (*resp)(struct fc_seq *,
1116 					struct fc_frame *fp,
1117 					void *arg))
1118 {
1119 	struct fc_frame *fp;
1120 	struct fc_seq *seq;
1121 	struct fc_rport *rport;
1122 	struct fc_rport_libfc_priv *rpriv;
1123 	const size_t len = sizeof(fsp->cdb_cmd);
1124 	int rc = 0;
1125 
1126 	if (fc_fcp_lock_pkt(fsp))
1127 		return 0;
1128 
1129 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1130 	if (!fp) {
1131 		rc = -1;
1132 		goto unlock;
1133 	}
1134 
1135 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1136 	fr_fsp(fp) = fsp;
1137 	rport = fsp->rport;
1138 	fsp->max_payload = rport->maxframe_size;
1139 	rpriv = rport->dd_data;
1140 
1141 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1142 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1143 		       FC_FCTL_REQ, 0);
1144 
1145 	seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1146 				      fsp, 0);
1147 	if (!seq) {
1148 		rc = -1;
1149 		goto unlock;
1150 	}
1151 	fsp->last_pkt_time = jiffies;
1152 	fsp->seq_ptr = seq;
1153 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1154 
1155 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1156 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1157 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1158 
1159 unlock:
1160 	fc_fcp_unlock_pkt(fsp);
1161 	return rc;
1162 }
1163 
1164 /**
1165  * fc_fcp_error() - Handler for FCP layer errors
1166  * @fsp: The FCP packet the error is on
1167  * @fp:	 The frame that has errored
1168  */
1169 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1170 {
1171 	int error = PTR_ERR(fp);
1172 
1173 	if (fc_fcp_lock_pkt(fsp))
1174 		return;
1175 
1176 	if (error == -FC_EX_CLOSED) {
1177 		fc_fcp_retry_cmd(fsp);
1178 		goto unlock;
1179 	}
1180 
1181 	/*
1182 	 * clear abort pending, because the lower layer
1183 	 * decided to force completion.
1184 	 */
1185 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1186 	fsp->status_code = FC_CMD_PLOGO;
1187 	fc_fcp_complete_locked(fsp);
1188 unlock:
1189 	fc_fcp_unlock_pkt(fsp);
1190 }
1191 
1192 /**
1193  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1194  * @fsp:   The FCP packet to abort on
1195  *
1196  * Called to send an abort and then wait for abort completion
1197  */
1198 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1199 {
1200 	int rc = FAILED;
1201 	unsigned long ticks_left;
1202 
1203 	if (fc_fcp_send_abort(fsp))
1204 		return FAILED;
1205 
1206 	init_completion(&fsp->tm_done);
1207 	fsp->wait_for_comp = 1;
1208 
1209 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1210 	ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1211 							FC_SCSI_TM_TOV);
1212 	spin_lock_bh(&fsp->scsi_pkt_lock);
1213 	fsp->wait_for_comp = 0;
1214 
1215 	if (!ticks_left) {
1216 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1217 	} else if (fsp->state & FC_SRB_ABORTED) {
1218 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1219 		rc = SUCCESS;
1220 		fc_fcp_complete_locked(fsp);
1221 	}
1222 
1223 	return rc;
1224 }
1225 
1226 /**
1227  * fc_lun_reset_send() - Send LUN reset command
1228  * @data: The FCP packet that identifies the LUN to be reset
1229  */
1230 static void fc_lun_reset_send(unsigned long data)
1231 {
1232 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1233 	struct fc_lport *lport = fsp->lp;
1234 
1235 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1236 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1237 			return;
1238 		if (fc_fcp_lock_pkt(fsp))
1239 			return;
1240 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1241 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1242 		fc_fcp_unlock_pkt(fsp);
1243 	}
1244 }
1245 
1246 /**
1247  * fc_lun_reset() - Send a LUN RESET command to a device
1248  *		    and wait for the reply
1249  * @lport: The local port to sent the command on
1250  * @fsp:   The FCP packet that identifies the LUN to be reset
1251  * @id:	   The SCSI command ID
1252  * @lun:   The LUN ID to be reset
1253  */
1254 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1255 			unsigned int id, unsigned int lun)
1256 {
1257 	int rc;
1258 
1259 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1260 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1261 	int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1262 
1263 	fsp->wait_for_comp = 1;
1264 	init_completion(&fsp->tm_done);
1265 
1266 	fc_lun_reset_send((unsigned long)fsp);
1267 
1268 	/*
1269 	 * wait for completion of reset
1270 	 * after that make sure all commands are terminated
1271 	 */
1272 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1273 
1274 	spin_lock_bh(&fsp->scsi_pkt_lock);
1275 	fsp->state |= FC_SRB_COMPL;
1276 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1277 
1278 	del_timer_sync(&fsp->timer);
1279 
1280 	spin_lock_bh(&fsp->scsi_pkt_lock);
1281 	if (fsp->seq_ptr) {
1282 		lport->tt.exch_done(fsp->seq_ptr);
1283 		fsp->seq_ptr = NULL;
1284 	}
1285 	fsp->wait_for_comp = 0;
1286 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1287 
1288 	if (!rc) {
1289 		FC_SCSI_DBG(lport, "lun reset failed\n");
1290 		return FAILED;
1291 	}
1292 
1293 	/* cdb_status holds the tmf's rsp code */
1294 	if (fsp->cdb_status != FCP_TMF_CMPL)
1295 		return FAILED;
1296 
1297 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1298 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1299 	return SUCCESS;
1300 }
1301 
1302 /**
1303  * fc_tm_done() - Task Management response handler
1304  * @seq: The sequence that the response is on
1305  * @fp:	 The response frame
1306  * @arg: The FCP packet the response is for
1307  */
1308 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1309 {
1310 	struct fc_fcp_pkt *fsp = arg;
1311 	struct fc_frame_header *fh;
1312 
1313 	if (IS_ERR(fp)) {
1314 		/*
1315 		 * If there is an error just let it timeout or wait
1316 		 * for TMF to be aborted if it timedout.
1317 		 *
1318 		 * scsi-eh will escalate for when either happens.
1319 		 */
1320 		return;
1321 	}
1322 
1323 	if (fc_fcp_lock_pkt(fsp))
1324 		goto out;
1325 
1326 	/*
1327 	 * raced with eh timeout handler.
1328 	 */
1329 	if (!fsp->seq_ptr || !fsp->wait_for_comp)
1330 		goto out_unlock;
1331 
1332 	fh = fc_frame_header_get(fp);
1333 	if (fh->fh_type != FC_TYPE_BLS)
1334 		fc_fcp_resp(fsp, fp);
1335 	fsp->seq_ptr = NULL;
1336 	fsp->lp->tt.exch_done(seq);
1337 out_unlock:
1338 	fc_fcp_unlock_pkt(fsp);
1339 out:
1340 	fc_frame_free(fp);
1341 }
1342 
1343 /**
1344  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1345  * @lport: The local port to be cleaned up
1346  */
1347 static void fc_fcp_cleanup(struct fc_lport *lport)
1348 {
1349 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1350 }
1351 
1352 /**
1353  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1354  * @data: The FCP packet that has timed out
1355  *
1356  * If REC is supported then just issue it and return. The REC exchange will
1357  * complete or time out and recovery can continue at that point. Otherwise,
1358  * if the response has been received without all the data it has been
1359  * ER_TIMEOUT since the response was received. If the response has not been
1360  * received we see if data was received recently. If it has been then we
1361  * continue waiting, otherwise, we abort the command.
1362  */
1363 static void fc_fcp_timeout(unsigned long data)
1364 {
1365 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1366 	struct fc_rport *rport = fsp->rport;
1367 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1368 
1369 	if (fc_fcp_lock_pkt(fsp))
1370 		return;
1371 
1372 	if (fsp->cdb_cmd.fc_tm_flags)
1373 		goto unlock;
1374 
1375 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1376 
1377 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1378 		fc_fcp_rec(fsp);
1379 	else if (fsp->state & FC_SRB_RCV_STATUS)
1380 		fc_fcp_complete_locked(fsp);
1381 	else
1382 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1383 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1384 unlock:
1385 	fc_fcp_unlock_pkt(fsp);
1386 }
1387 
1388 /**
1389  * fc_fcp_rec() - Send a REC ELS request
1390  * @fsp: The FCP packet to send the REC request on
1391  */
1392 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1393 {
1394 	struct fc_lport *lport;
1395 	struct fc_frame *fp;
1396 	struct fc_rport *rport;
1397 	struct fc_rport_libfc_priv *rpriv;
1398 
1399 	lport = fsp->lp;
1400 	rport = fsp->rport;
1401 	rpriv = rport->dd_data;
1402 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1403 		fsp->status_code = FC_HRD_ERROR;
1404 		fsp->io_status = 0;
1405 		fc_fcp_complete_locked(fsp);
1406 		return;
1407 	}
1408 
1409 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1410 	if (!fp)
1411 		goto retry;
1412 
1413 	fr_seq(fp) = fsp->seq_ptr;
1414 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1415 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1416 		       FC_FCTL_REQ, 0);
1417 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1418 				 fc_fcp_rec_resp, fsp,
1419 				 2 * lport->r_a_tov)) {
1420 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1421 		return;
1422 	}
1423 retry:
1424 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1425 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1426 	else
1427 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1428 }
1429 
1430 /**
1431  * fc_fcp_rec_resp() - Handler for REC ELS responses
1432  * @seq: The sequence the response is on
1433  * @fp:	 The response frame
1434  * @arg: The FCP packet the response is on
1435  *
1436  * If the response is a reject then the scsi layer will handle
1437  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1438  * set the timeout and return. If the I/O was completed then complete the
1439  * exchange and tell the SCSI layer.
1440  */
1441 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1442 {
1443 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1444 	struct fc_els_rec_acc *recp;
1445 	struct fc_els_ls_rjt *rjt;
1446 	u32 e_stat;
1447 	u8 opcode;
1448 	u32 offset;
1449 	enum dma_data_direction data_dir;
1450 	enum fc_rctl r_ctl;
1451 	struct fc_rport_libfc_priv *rpriv;
1452 
1453 	if (IS_ERR(fp)) {
1454 		fc_fcp_rec_error(fsp, fp);
1455 		return;
1456 	}
1457 
1458 	if (fc_fcp_lock_pkt(fsp))
1459 		goto out;
1460 
1461 	fsp->recov_retry = 0;
1462 	opcode = fc_frame_payload_op(fp);
1463 	if (opcode == ELS_LS_RJT) {
1464 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1465 		switch (rjt->er_reason) {
1466 		default:
1467 			FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1468 				   "reason %d expl %d\n",
1469 				   fsp->rport->port_id, rjt->er_reason,
1470 				   rjt->er_explan);
1471 			/* fall through */
1472 		case ELS_RJT_UNSUP:
1473 			FC_FCP_DBG(fsp, "device does not support REC\n");
1474 			rpriv = fsp->rport->dd_data;
1475 			/*
1476 			 * if we do not spport RECs or got some bogus
1477 			 * reason then resetup timer so we check for
1478 			 * making progress.
1479 			 */
1480 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1481 			break;
1482 		case ELS_RJT_LOGIC:
1483 		case ELS_RJT_UNAB:
1484 			/*
1485 			 * If no data transfer, the command frame got dropped
1486 			 * so we just retry.  If data was transferred, we
1487 			 * lost the response but the target has no record,
1488 			 * so we abort and retry.
1489 			 */
1490 			if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1491 			    fsp->xfer_len == 0) {
1492 				fc_fcp_retry_cmd(fsp);
1493 				break;
1494 			}
1495 			fc_fcp_recovery(fsp, FC_ERROR);
1496 			break;
1497 		}
1498 	} else if (opcode == ELS_LS_ACC) {
1499 		if (fsp->state & FC_SRB_ABORTED)
1500 			goto unlock_out;
1501 
1502 		data_dir = fsp->cmd->sc_data_direction;
1503 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1504 		offset = ntohl(recp->reca_fc4value);
1505 		e_stat = ntohl(recp->reca_e_stat);
1506 
1507 		if (e_stat & ESB_ST_COMPLETE) {
1508 
1509 			/*
1510 			 * The exchange is complete.
1511 			 *
1512 			 * For output, we must've lost the response.
1513 			 * For input, all data must've been sent.
1514 			 * We lost may have lost the response
1515 			 * (and a confirmation was requested) and maybe
1516 			 * some data.
1517 			 *
1518 			 * If all data received, send SRR
1519 			 * asking for response.	 If partial data received,
1520 			 * or gaps, SRR requests data at start of gap.
1521 			 * Recovery via SRR relies on in-order-delivery.
1522 			 */
1523 			if (data_dir == DMA_TO_DEVICE) {
1524 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1525 			} else if (fsp->xfer_contig_end == offset) {
1526 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1527 			} else {
1528 				offset = fsp->xfer_contig_end;
1529 				r_ctl = FC_RCTL_DD_SOL_DATA;
1530 			}
1531 			fc_fcp_srr(fsp, r_ctl, offset);
1532 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1533 			/*
1534 			 * The remote port has the initiative, so just
1535 			 * keep waiting for it to complete.
1536 			 */
1537 			fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1538 		} else {
1539 
1540 			/*
1541 			 * The exchange is incomplete, we have seq. initiative.
1542 			 * Lost response with requested confirmation,
1543 			 * lost confirmation, lost transfer ready or
1544 			 * lost write data.
1545 			 *
1546 			 * For output, if not all data was received, ask
1547 			 * for transfer ready to be repeated.
1548 			 *
1549 			 * If we received or sent all the data, send SRR to
1550 			 * request response.
1551 			 *
1552 			 * If we lost a response, we may have lost some read
1553 			 * data as well.
1554 			 */
1555 			r_ctl = FC_RCTL_DD_SOL_DATA;
1556 			if (data_dir == DMA_TO_DEVICE) {
1557 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1558 				if (offset < fsp->data_len)
1559 					r_ctl = FC_RCTL_DD_DATA_DESC;
1560 			} else if (offset == fsp->xfer_contig_end) {
1561 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1562 			} else if (fsp->xfer_contig_end < offset) {
1563 				offset = fsp->xfer_contig_end;
1564 			}
1565 			fc_fcp_srr(fsp, r_ctl, offset);
1566 		}
1567 	}
1568 unlock_out:
1569 	fc_fcp_unlock_pkt(fsp);
1570 out:
1571 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1572 	fc_frame_free(fp);
1573 }
1574 
1575 /**
1576  * fc_fcp_rec_error() - Handler for REC errors
1577  * @fsp: The FCP packet the error is on
1578  * @fp:	 The REC frame
1579  */
1580 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1581 {
1582 	int error = PTR_ERR(fp);
1583 
1584 	if (fc_fcp_lock_pkt(fsp))
1585 		goto out;
1586 
1587 	switch (error) {
1588 	case -FC_EX_CLOSED:
1589 		fc_fcp_retry_cmd(fsp);
1590 		break;
1591 
1592 	default:
1593 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1594 			   fsp, fsp->rport->port_id, error);
1595 		fsp->status_code = FC_CMD_PLOGO;
1596 		/* fall through */
1597 
1598 	case -FC_EX_TIMEOUT:
1599 		/*
1600 		 * Assume REC or LS_ACC was lost.
1601 		 * The exchange manager will have aborted REC, so retry.
1602 		 */
1603 		FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1604 			   fsp->rport->port_id, error, fsp->recov_retry,
1605 			   FC_MAX_RECOV_RETRY);
1606 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1607 			fc_fcp_rec(fsp);
1608 		else
1609 			fc_fcp_recovery(fsp, FC_ERROR);
1610 		break;
1611 	}
1612 	fc_fcp_unlock_pkt(fsp);
1613 out:
1614 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1615 }
1616 
1617 /**
1618  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1619  * @fsp: The FCP pkt that needs to be aborted
1620  */
1621 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1622 {
1623 	fsp->status_code = code;
1624 	fsp->cdb_status = 0;
1625 	fsp->io_status = 0;
1626 	/*
1627 	 * if this fails then we let the scsi command timer fire and
1628 	 * scsi-ml escalate.
1629 	 */
1630 	fc_fcp_send_abort(fsp);
1631 }
1632 
1633 /**
1634  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1635  * @fsp:   The FCP packet the SRR is to be sent on
1636  * @r_ctl: The R_CTL field for the SRR request
1637  * This is called after receiving status but insufficient data, or
1638  * when expecting status but the request has timed out.
1639  */
1640 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1641 {
1642 	struct fc_lport *lport = fsp->lp;
1643 	struct fc_rport *rport;
1644 	struct fc_rport_libfc_priv *rpriv;
1645 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1646 	struct fc_seq *seq;
1647 	struct fcp_srr *srr;
1648 	struct fc_frame *fp;
1649 	unsigned int rec_tov;
1650 
1651 	rport = fsp->rport;
1652 	rpriv = rport->dd_data;
1653 
1654 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1655 	    rpriv->rp_state != RPORT_ST_READY)
1656 		goto retry;			/* shouldn't happen */
1657 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1658 	if (!fp)
1659 		goto retry;
1660 
1661 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1662 	memset(srr, 0, sizeof(*srr));
1663 	srr->srr_op = ELS_SRR;
1664 	srr->srr_ox_id = htons(ep->oxid);
1665 	srr->srr_rx_id = htons(ep->rxid);
1666 	srr->srr_r_ctl = r_ctl;
1667 	srr->srr_rel_off = htonl(offset);
1668 
1669 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1670 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1671 		       FC_FCTL_REQ, 0);
1672 
1673 	rec_tov = get_fsp_rec_tov(fsp);
1674 	seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp,
1675 				      fc_fcp_pkt_destroy,
1676 				      fsp, jiffies_to_msecs(rec_tov));
1677 	if (!seq)
1678 		goto retry;
1679 
1680 	fsp->recov_seq = seq;
1681 	fsp->xfer_len = offset;
1682 	fsp->xfer_contig_end = offset;
1683 	fsp->state &= ~FC_SRB_RCV_STATUS;
1684 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1685 	return;
1686 retry:
1687 	fc_fcp_retry_cmd(fsp);
1688 }
1689 
1690 /**
1691  * fc_fcp_srr_resp() - Handler for SRR response
1692  * @seq: The sequence the SRR is on
1693  * @fp:	 The SRR frame
1694  * @arg: The FCP packet the SRR is on
1695  */
1696 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1697 {
1698 	struct fc_fcp_pkt *fsp = arg;
1699 	struct fc_frame_header *fh;
1700 
1701 	if (IS_ERR(fp)) {
1702 		fc_fcp_srr_error(fsp, fp);
1703 		return;
1704 	}
1705 
1706 	if (fc_fcp_lock_pkt(fsp))
1707 		goto out;
1708 
1709 	fh = fc_frame_header_get(fp);
1710 	/*
1711 	 * BUG? fc_fcp_srr_error calls exch_done which would release
1712 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1713 	 * then fc_exch_timeout would be sending an abort. The exch_done
1714 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1715 	 * an abort response though.
1716 	 */
1717 	if (fh->fh_type == FC_TYPE_BLS) {
1718 		fc_fcp_unlock_pkt(fsp);
1719 		return;
1720 	}
1721 
1722 	switch (fc_frame_payload_op(fp)) {
1723 	case ELS_LS_ACC:
1724 		fsp->recov_retry = 0;
1725 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1726 		break;
1727 	case ELS_LS_RJT:
1728 	default:
1729 		fc_fcp_recovery(fsp, FC_ERROR);
1730 		break;
1731 	}
1732 	fc_fcp_unlock_pkt(fsp);
1733 out:
1734 	fsp->lp->tt.exch_done(seq);
1735 	fc_frame_free(fp);
1736 }
1737 
1738 /**
1739  * fc_fcp_srr_error() - Handler for SRR errors
1740  * @fsp: The FCP packet that the SRR error is on
1741  * @fp:	 The SRR frame
1742  */
1743 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1744 {
1745 	if (fc_fcp_lock_pkt(fsp))
1746 		goto out;
1747 	switch (PTR_ERR(fp)) {
1748 	case -FC_EX_TIMEOUT:
1749 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1750 			fc_fcp_rec(fsp);
1751 		else
1752 			fc_fcp_recovery(fsp, FC_TIMED_OUT);
1753 		break;
1754 	case -FC_EX_CLOSED:			/* e.g., link failure */
1755 		/* fall through */
1756 	default:
1757 		fc_fcp_retry_cmd(fsp);
1758 		break;
1759 	}
1760 	fc_fcp_unlock_pkt(fsp);
1761 out:
1762 	fsp->lp->tt.exch_done(fsp->recov_seq);
1763 }
1764 
1765 /**
1766  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1767  * @lport: The local port to be checked
1768  */
1769 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1770 {
1771 	/* lock ? */
1772 	return (lport->state == LPORT_ST_READY) &&
1773 		lport->link_up && !lport->qfull;
1774 }
1775 
1776 /**
1777  * fc_queuecommand() - The queuecommand function of the SCSI template
1778  * @shost: The Scsi_Host that the command was issued to
1779  * @cmd:   The scsi_cmnd to be executed
1780  *
1781  * This is the i/o strategy routine, called by the SCSI layer.
1782  */
1783 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1784 {
1785 	struct fc_lport *lport = shost_priv(shost);
1786 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1787 	struct fc_fcp_pkt *fsp;
1788 	struct fc_rport_libfc_priv *rpriv;
1789 	int rval;
1790 	int rc = 0;
1791 	struct fcoe_dev_stats *stats;
1792 
1793 	rval = fc_remote_port_chkready(rport);
1794 	if (rval) {
1795 		sc_cmd->result = rval;
1796 		sc_cmd->scsi_done(sc_cmd);
1797 		return 0;
1798 	}
1799 
1800 	if (!*(struct fc_remote_port **)rport->dd_data) {
1801 		/*
1802 		 * rport is transitioning from blocked/deleted to
1803 		 * online
1804 		 */
1805 		sc_cmd->result = DID_IMM_RETRY << 16;
1806 		sc_cmd->scsi_done(sc_cmd);
1807 		goto out;
1808 	}
1809 
1810 	rpriv = rport->dd_data;
1811 
1812 	if (!fc_fcp_lport_queue_ready(lport)) {
1813 		if (lport->qfull)
1814 			fc_fcp_can_queue_ramp_down(lport);
1815 		rc = SCSI_MLQUEUE_HOST_BUSY;
1816 		goto out;
1817 	}
1818 
1819 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1820 	if (fsp == NULL) {
1821 		rc = SCSI_MLQUEUE_HOST_BUSY;
1822 		goto out;
1823 	}
1824 
1825 	/*
1826 	 * build the libfc request pkt
1827 	 */
1828 	fsp->cmd = sc_cmd;	/* save the cmd */
1829 	fsp->rport = rport;	/* set the remote port ptr */
1830 
1831 	/*
1832 	 * set up the transfer length
1833 	 */
1834 	fsp->data_len = scsi_bufflen(sc_cmd);
1835 	fsp->xfer_len = 0;
1836 
1837 	/*
1838 	 * setup the data direction
1839 	 */
1840 	stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1841 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1842 		fsp->req_flags = FC_SRB_READ;
1843 		stats->InputRequests++;
1844 		stats->InputBytes += fsp->data_len;
1845 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1846 		fsp->req_flags = FC_SRB_WRITE;
1847 		stats->OutputRequests++;
1848 		stats->OutputBytes += fsp->data_len;
1849 	} else {
1850 		fsp->req_flags = 0;
1851 		stats->ControlRequests++;
1852 	}
1853 	put_cpu();
1854 
1855 	init_timer(&fsp->timer);
1856 	fsp->timer.data = (unsigned long)fsp;
1857 
1858 	/*
1859 	 * send it to the lower layer
1860 	 * if we get -1 return then put the request in the pending
1861 	 * queue.
1862 	 */
1863 	rval = fc_fcp_pkt_send(lport, fsp);
1864 	if (rval != 0) {
1865 		fsp->state = FC_SRB_FREE;
1866 		fc_fcp_pkt_release(fsp);
1867 		rc = SCSI_MLQUEUE_HOST_BUSY;
1868 	}
1869 out:
1870 	return rc;
1871 }
1872 EXPORT_SYMBOL(fc_queuecommand);
1873 
1874 /**
1875  * fc_io_compl() - Handle responses for completed commands
1876  * @fsp: The FCP packet that is complete
1877  *
1878  * Translates fcp_pkt errors to a Linux SCSI errors.
1879  * The fcp packet lock must be held when calling.
1880  */
1881 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1882 {
1883 	struct fc_fcp_internal *si;
1884 	struct scsi_cmnd *sc_cmd;
1885 	struct fc_lport *lport;
1886 	unsigned long flags;
1887 
1888 	/* release outstanding ddp context */
1889 	fc_fcp_ddp_done(fsp);
1890 
1891 	fsp->state |= FC_SRB_COMPL;
1892 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1893 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1894 		del_timer_sync(&fsp->timer);
1895 		spin_lock_bh(&fsp->scsi_pkt_lock);
1896 	}
1897 
1898 	lport = fsp->lp;
1899 	si = fc_get_scsi_internal(lport);
1900 
1901 	/*
1902 	 * if can_queue ramp down is done then try can_queue ramp up
1903 	 * since commands are completing now.
1904 	 */
1905 	if (si->last_can_queue_ramp_down_time)
1906 		fc_fcp_can_queue_ramp_up(lport);
1907 
1908 	sc_cmd = fsp->cmd;
1909 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1910 	switch (fsp->status_code) {
1911 	case FC_COMPLETE:
1912 		if (fsp->cdb_status == 0) {
1913 			/*
1914 			 * good I/O status
1915 			 */
1916 			sc_cmd->result = DID_OK << 16;
1917 			if (fsp->scsi_resid)
1918 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1919 		} else {
1920 			/*
1921 			 * transport level I/O was ok but scsi
1922 			 * has non zero status
1923 			 */
1924 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1925 		}
1926 		break;
1927 	case FC_ERROR:
1928 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1929 			   "due to FC_ERROR\n");
1930 		sc_cmd->result = DID_ERROR << 16;
1931 		break;
1932 	case FC_DATA_UNDRUN:
1933 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1934 			/*
1935 			 * scsi status is good but transport level
1936 			 * underrun.
1937 			 */
1938 			if (fsp->state & FC_SRB_RCV_STATUS) {
1939 				sc_cmd->result = DID_OK << 16;
1940 			} else {
1941 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1942 					   " due to FC_DATA_UNDRUN (trans)\n");
1943 				sc_cmd->result = DID_ERROR << 16;
1944 			}
1945 		} else {
1946 			/*
1947 			 * scsi got underrun, this is an error
1948 			 */
1949 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1950 				   "due to FC_DATA_UNDRUN (scsi)\n");
1951 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1952 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1953 		}
1954 		break;
1955 	case FC_DATA_OVRRUN:
1956 		/*
1957 		 * overrun is an error
1958 		 */
1959 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1960 			   "due to FC_DATA_OVRRUN\n");
1961 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1962 		break;
1963 	case FC_CMD_ABORTED:
1964 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1965 			  "due to FC_CMD_ABORTED\n");
1966 		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1967 		break;
1968 	case FC_CMD_RESET:
1969 		FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1970 			   "due to FC_CMD_RESET\n");
1971 		sc_cmd->result = (DID_RESET << 16);
1972 		break;
1973 	case FC_HRD_ERROR:
1974 		FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1975 			   "due to FC_HRD_ERROR\n");
1976 		sc_cmd->result = (DID_NO_CONNECT << 16);
1977 		break;
1978 	case FC_CRC_ERROR:
1979 		FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1980 			   "due to FC_CRC_ERROR\n");
1981 		sc_cmd->result = (DID_PARITY << 16);
1982 		break;
1983 	case FC_TIMED_OUT:
1984 		FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1985 			   "due to FC_TIMED_OUT\n");
1986 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1987 		break;
1988 	default:
1989 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1990 			   "due to unknown error\n");
1991 		sc_cmd->result = (DID_ERROR << 16);
1992 		break;
1993 	}
1994 
1995 	if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
1996 		sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
1997 
1998 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1999 	list_del(&fsp->list);
2000 	sc_cmd->SCp.ptr = NULL;
2001 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2002 	sc_cmd->scsi_done(sc_cmd);
2003 
2004 	/* release ref from initial allocation in queue command */
2005 	fc_fcp_pkt_release(fsp);
2006 }
2007 
2008 /**
2009  * fc_eh_abort() - Abort a command
2010  * @sc_cmd: The SCSI command to abort
2011  *
2012  * From SCSI host template.
2013  * Send an ABTS to the target device and wait for the response.
2014  */
2015 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2016 {
2017 	struct fc_fcp_pkt *fsp;
2018 	struct fc_lport *lport;
2019 	struct fc_fcp_internal *si;
2020 	int rc = FAILED;
2021 	unsigned long flags;
2022 	int rval;
2023 
2024 	rval = fc_block_scsi_eh(sc_cmd);
2025 	if (rval)
2026 		return rval;
2027 
2028 	lport = shost_priv(sc_cmd->device->host);
2029 	if (lport->state != LPORT_ST_READY)
2030 		return rc;
2031 	else if (!lport->link_up)
2032 		return rc;
2033 
2034 	si = fc_get_scsi_internal(lport);
2035 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2036 	fsp = CMD_SP(sc_cmd);
2037 	if (!fsp) {
2038 		/* command completed while scsi eh was setting up */
2039 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2040 		return SUCCESS;
2041 	}
2042 	/* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2043 	fc_fcp_pkt_hold(fsp);
2044 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2045 
2046 	if (fc_fcp_lock_pkt(fsp)) {
2047 		/* completed while we were waiting for timer to be deleted */
2048 		rc = SUCCESS;
2049 		goto release_pkt;
2050 	}
2051 
2052 	rc = fc_fcp_pkt_abort(fsp);
2053 	fc_fcp_unlock_pkt(fsp);
2054 
2055 release_pkt:
2056 	fc_fcp_pkt_release(fsp);
2057 	return rc;
2058 }
2059 EXPORT_SYMBOL(fc_eh_abort);
2060 
2061 /**
2062  * fc_eh_device_reset() - Reset a single LUN
2063  * @sc_cmd: The SCSI command which identifies the device whose
2064  *	    LUN is to be reset
2065  *
2066  * Set from SCSI host template.
2067  */
2068 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2069 {
2070 	struct fc_lport *lport;
2071 	struct fc_fcp_pkt *fsp;
2072 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2073 	int rc = FAILED;
2074 	int rval;
2075 
2076 	rval = fc_block_scsi_eh(sc_cmd);
2077 	if (rval)
2078 		return rval;
2079 
2080 	lport = shost_priv(sc_cmd->device->host);
2081 
2082 	if (lport->state != LPORT_ST_READY)
2083 		return rc;
2084 
2085 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2086 
2087 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2088 	if (fsp == NULL) {
2089 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2090 		goto out;
2091 	}
2092 
2093 	/*
2094 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2095 	 * the sc passed in is not setup for execution like when sent
2096 	 * through the queuecommand callout.
2097 	 */
2098 	fsp->rport = rport;	/* set the remote port ptr */
2099 
2100 	/*
2101 	 * flush outstanding commands
2102 	 */
2103 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2104 	fsp->state = FC_SRB_FREE;
2105 	fc_fcp_pkt_release(fsp);
2106 
2107 out:
2108 	return rc;
2109 }
2110 EXPORT_SYMBOL(fc_eh_device_reset);
2111 
2112 /**
2113  * fc_eh_host_reset() - Reset a Scsi_Host.
2114  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2115  */
2116 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2117 {
2118 	struct Scsi_Host *shost = sc_cmd->device->host;
2119 	struct fc_lport *lport = shost_priv(shost);
2120 	unsigned long wait_tmo;
2121 
2122 	FC_SCSI_DBG(lport, "Resetting host\n");
2123 
2124 	fc_block_scsi_eh(sc_cmd);
2125 
2126 	lport->tt.lport_reset(lport);
2127 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2128 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2129 							       wait_tmo))
2130 		msleep(1000);
2131 
2132 	if (fc_fcp_lport_queue_ready(lport)) {
2133 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2134 			     "on port (%6.6x)\n", lport->port_id);
2135 		return SUCCESS;
2136 	} else {
2137 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2138 			     "port (%6.6x) is not ready.\n",
2139 			     lport->port_id);
2140 		return FAILED;
2141 	}
2142 }
2143 EXPORT_SYMBOL(fc_eh_host_reset);
2144 
2145 /**
2146  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2147  * @sdev: The SCSI device that identifies the SCSI host
2148  *
2149  * Configures queue depth based on host's cmd_per_len. If not set
2150  * then we use the libfc default.
2151  */
2152 int fc_slave_alloc(struct scsi_device *sdev)
2153 {
2154 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2155 
2156 	if (!rport || fc_remote_port_chkready(rport))
2157 		return -ENXIO;
2158 
2159 	if (sdev->tagged_supported)
2160 		scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2161 	else
2162 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2163 					FC_FCP_DFLT_QUEUE_DEPTH);
2164 
2165 	return 0;
2166 }
2167 EXPORT_SYMBOL(fc_slave_alloc);
2168 
2169 /**
2170  * fc_change_queue_depth() - Change a device's queue depth
2171  * @sdev:   The SCSI device whose queue depth is to change
2172  * @qdepth: The new queue depth
2173  * @reason: The resason for the change
2174  */
2175 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2176 {
2177 	switch (reason) {
2178 	case SCSI_QDEPTH_DEFAULT:
2179 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2180 		break;
2181 	case SCSI_QDEPTH_QFULL:
2182 		scsi_track_queue_full(sdev, qdepth);
2183 		break;
2184 	case SCSI_QDEPTH_RAMP_UP:
2185 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2186 		break;
2187 	default:
2188 		return -EOPNOTSUPP;
2189 	}
2190 	return sdev->queue_depth;
2191 }
2192 EXPORT_SYMBOL(fc_change_queue_depth);
2193 
2194 /**
2195  * fc_change_queue_type() - Change a device's queue type
2196  * @sdev:     The SCSI device whose queue depth is to change
2197  * @tag_type: Identifier for queue type
2198  */
2199 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2200 {
2201 	if (sdev->tagged_supported) {
2202 		scsi_set_tag_type(sdev, tag_type);
2203 		if (tag_type)
2204 			scsi_activate_tcq(sdev, sdev->queue_depth);
2205 		else
2206 			scsi_deactivate_tcq(sdev, sdev->queue_depth);
2207 	} else
2208 		tag_type = 0;
2209 
2210 	return tag_type;
2211 }
2212 EXPORT_SYMBOL(fc_change_queue_type);
2213 
2214 /**
2215  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2216  * @lport: The local port that no longer needs the FCP layer
2217  */
2218 void fc_fcp_destroy(struct fc_lport *lport)
2219 {
2220 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2221 
2222 	if (!list_empty(&si->scsi_pkt_queue))
2223 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2224 		       "port (%6.6x)\n", lport->port_id);
2225 
2226 	mempool_destroy(si->scsi_pkt_pool);
2227 	kfree(si);
2228 	lport->scsi_priv = NULL;
2229 }
2230 EXPORT_SYMBOL(fc_fcp_destroy);
2231 
2232 int fc_setup_fcp(void)
2233 {
2234 	int rc = 0;
2235 
2236 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2237 					    sizeof(struct fc_fcp_pkt),
2238 					    0, SLAB_HWCACHE_ALIGN, NULL);
2239 	if (!scsi_pkt_cachep) {
2240 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2241 		       "module load failed!");
2242 		rc = -ENOMEM;
2243 	}
2244 
2245 	return rc;
2246 }
2247 
2248 void fc_destroy_fcp(void)
2249 {
2250 	if (scsi_pkt_cachep)
2251 		kmem_cache_destroy(scsi_pkt_cachep);
2252 }
2253 
2254 /**
2255  * fc_fcp_init() - Initialize the FCP layer for a local port
2256  * @lport: The local port to initialize the exchange layer for
2257  */
2258 int fc_fcp_init(struct fc_lport *lport)
2259 {
2260 	int rc;
2261 	struct fc_fcp_internal *si;
2262 
2263 	if (!lport->tt.fcp_cmd_send)
2264 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2265 
2266 	if (!lport->tt.fcp_cleanup)
2267 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2268 
2269 	if (!lport->tt.fcp_abort_io)
2270 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2271 
2272 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2273 	if (!si)
2274 		return -ENOMEM;
2275 	lport->scsi_priv = si;
2276 	si->max_can_queue = lport->host->can_queue;
2277 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2278 	spin_lock_init(&si->scsi_queue_lock);
2279 
2280 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2281 	if (!si->scsi_pkt_pool) {
2282 		rc = -ENOMEM;
2283 		goto free_internal;
2284 	}
2285 	return 0;
2286 
2287 free_internal:
2288 	kfree(si);
2289 	return rc;
2290 }
2291 EXPORT_SYMBOL(fc_fcp_init);
2292