1 /* 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * * Neither the name of Intel Corporation nor the names of its 40 * contributors may be used to endorse or promote products derived 41 * from this software without specific prior written permission. 42 * 43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 54 */ 55 #ifndef _SCI_HOST_H_ 56 #define _SCI_HOST_H_ 57 58 #include <scsi/sas_ata.h> 59 #include "remote_device.h" 60 #include "phy.h" 61 #include "isci.h" 62 #include "remote_node_table.h" 63 #include "registers.h" 64 #include "unsolicited_frame_control.h" 65 #include "probe_roms.h" 66 67 struct isci_request; 68 struct scu_task_context; 69 70 71 /** 72 * struct sci_power_control - 73 * 74 * This structure defines the fields for managing power control for direct 75 * attached disk devices. 76 */ 77 struct sci_power_control { 78 /** 79 * This field is set when the power control timer is running and cleared when 80 * it is not. 81 */ 82 bool timer_started; 83 84 /** 85 * Timer to control when the directed attached disks can consume power. 86 */ 87 struct sci_timer timer; 88 89 /** 90 * This field is used to keep track of how many phys are put into the 91 * requesters field. 92 */ 93 u8 phys_waiting; 94 95 /** 96 * This field is used to keep track of how many phys have been granted to consume power 97 */ 98 u8 phys_granted_power; 99 100 /** 101 * This field is an array of phys that we are waiting on. The phys are direct 102 * mapped into requesters via struct sci_phy.phy_index 103 */ 104 struct isci_phy *requesters[SCI_MAX_PHYS]; 105 106 }; 107 108 struct sci_port_configuration_agent; 109 typedef void (*port_config_fn)(struct isci_host *, 110 struct sci_port_configuration_agent *, 111 struct isci_port *, struct isci_phy *); 112 bool is_port_config_apc(struct isci_host *ihost); 113 bool is_controller_start_complete(struct isci_host *ihost); 114 115 struct sci_port_configuration_agent { 116 u16 phy_configured_mask; 117 u16 phy_ready_mask; 118 struct { 119 u8 min_index; 120 u8 max_index; 121 } phy_valid_port_range[SCI_MAX_PHYS]; 122 bool timer_pending; 123 port_config_fn link_up_handler; 124 port_config_fn link_down_handler; 125 struct sci_timer timer; 126 }; 127 128 /** 129 * isci_host - primary host/controller object 130 * @timer: timeout start/stop operations 131 * @device_table: rni (hw remote node index) to remote device lookup table 132 * @available_remote_nodes: rni allocator 133 * @power_control: manage device spin up 134 * @io_request_sequence: generation number for tci's (task contexts) 135 * @task_context_table: hw task context table 136 * @remote_node_context_table: hw remote node context table 137 * @completion_queue: hw-producer driver-consumer communication ring 138 * @completion_queue_get: tracks the driver 'head' of the ring to notify hw 139 * @logical_port_entries: min({driver|silicon}-supported-port-count) 140 * @remote_node_entries: min({driver|silicon}-supported-node-count) 141 * @task_context_entries: min({driver|silicon}-supported-task-count) 142 * @phy_timer: phy startup timer 143 * @invalid_phy_mask: if an invalid_link_up notification is reported a bit for 144 * the phy index is set so further notifications are not 145 * made. Once the phy reports link up and is made part of a 146 * port then this bit is cleared. 147 148 */ 149 struct isci_host { 150 struct sci_base_state_machine sm; 151 /* XXX can we time this externally */ 152 struct sci_timer timer; 153 /* XXX drop reference module params directly */ 154 struct sci_user_parameters user_parameters; 155 /* XXX no need to be a union */ 156 struct sci_oem_params oem_parameters; 157 struct sci_port_configuration_agent port_agent; 158 struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; 159 struct sci_remote_node_table available_remote_nodes; 160 struct sci_power_control power_control; 161 u8 io_request_sequence[SCI_MAX_IO_REQUESTS]; 162 struct scu_task_context *task_context_table; 163 dma_addr_t tc_dma; 164 union scu_remote_node_context *remote_node_context_table; 165 dma_addr_t rnc_dma; 166 u32 *completion_queue; 167 dma_addr_t cq_dma; 168 u32 completion_queue_get; 169 u32 logical_port_entries; 170 u32 remote_node_entries; 171 u32 task_context_entries; 172 void *ufi_buf; 173 dma_addr_t ufi_dma; 174 struct sci_unsolicited_frame_control uf_control; 175 176 /* phy startup */ 177 struct sci_timer phy_timer; 178 /* XXX kill */ 179 bool phy_startup_timer_pending; 180 u32 next_phy_to_start; 181 /* XXX convert to unsigned long and use bitops */ 182 u8 invalid_phy_mask; 183 184 /* TODO attempt dynamic interrupt coalescing scheme */ 185 u16 interrupt_coalesce_number; 186 u32 interrupt_coalesce_timeout; 187 struct smu_registers __iomem *smu_registers; 188 struct scu_registers __iomem *scu_registers; 189 190 u16 tci_head; 191 u16 tci_tail; 192 u16 tci_pool[SCI_MAX_IO_REQUESTS]; 193 194 int id; /* unique within a given pci device */ 195 struct isci_phy phys[SCI_MAX_PHYS]; 196 struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ 197 struct asd_sas_port sas_ports[SCI_MAX_PORTS]; 198 struct sas_ha_struct sas_ha; 199 200 struct pci_dev *pdev; 201 #define IHOST_START_PENDING 0 202 #define IHOST_STOP_PENDING 1 203 #define IHOST_IRQ_ENABLED 2 204 unsigned long flags; 205 wait_queue_head_t eventq; 206 struct tasklet_struct completion_tasklet; 207 spinlock_t scic_lock; 208 struct isci_request *reqs[SCI_MAX_IO_REQUESTS]; 209 struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES]; 210 }; 211 212 /** 213 * enum sci_controller_states - This enumeration depicts all the states 214 * for the common controller state machine. 215 */ 216 enum sci_controller_states { 217 /** 218 * Simply the initial state for the base controller state machine. 219 */ 220 SCIC_INITIAL = 0, 221 222 /** 223 * This state indicates that the controller is reset. The memory for 224 * the controller is in it's initial state, but the controller requires 225 * initialization. 226 * This state is entered from the INITIAL state. 227 * This state is entered from the RESETTING state. 228 */ 229 SCIC_RESET, 230 231 /** 232 * This state is typically an action state that indicates the controller 233 * is in the process of initialization. In this state no new IO operations 234 * are permitted. 235 * This state is entered from the RESET state. 236 */ 237 SCIC_INITIALIZING, 238 239 /** 240 * This state indicates that the controller has been successfully 241 * initialized. In this state no new IO operations are permitted. 242 * This state is entered from the INITIALIZING state. 243 */ 244 SCIC_INITIALIZED, 245 246 /** 247 * This state indicates the the controller is in the process of becoming 248 * ready (i.e. starting). In this state no new IO operations are permitted. 249 * This state is entered from the INITIALIZED state. 250 */ 251 SCIC_STARTING, 252 253 /** 254 * This state indicates the controller is now ready. Thus, the user 255 * is able to perform IO operations on the controller. 256 * This state is entered from the STARTING state. 257 */ 258 SCIC_READY, 259 260 /** 261 * This state is typically an action state that indicates the controller 262 * is in the process of resetting. Thus, the user is unable to perform 263 * IO operations on the controller. A reset is considered destructive in 264 * most cases. 265 * This state is entered from the READY state. 266 * This state is entered from the FAILED state. 267 * This state is entered from the STOPPED state. 268 */ 269 SCIC_RESETTING, 270 271 /** 272 * This state indicates that the controller is in the process of stopping. 273 * In this state no new IO operations are permitted, but existing IO 274 * operations are allowed to complete. 275 * This state is entered from the READY state. 276 */ 277 SCIC_STOPPING, 278 279 /** 280 * This state indicates that the controller could not successfully be 281 * initialized. In this state no new IO operations are permitted. 282 * This state is entered from the INITIALIZING state. 283 * This state is entered from the STARTING state. 284 * This state is entered from the STOPPING state. 285 * This state is entered from the RESETTING state. 286 */ 287 SCIC_FAILED, 288 }; 289 290 /** 291 * struct isci_pci_info - This class represents the pci function containing the 292 * controllers. Depending on PCI SKU, there could be up to 2 controllers in 293 * the PCI function. 294 */ 295 #define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS) 296 297 struct isci_pci_info { 298 struct isci_host *hosts[SCI_MAX_CONTROLLERS]; 299 struct isci_orom *orom; 300 }; 301 302 static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) 303 { 304 return pci_get_drvdata(pdev); 305 } 306 307 static inline struct Scsi_Host *to_shost(struct isci_host *ihost) 308 { 309 return ihost->sas_ha.shost; 310 } 311 312 #define for_each_isci_host(id, ihost, pdev) \ 313 for (id = 0; id < SCI_MAX_CONTROLLERS && \ 314 (ihost = to_pci_info(pdev)->hosts[id]); id++) 315 316 static inline void wait_for_start(struct isci_host *ihost) 317 { 318 wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags)); 319 } 320 321 static inline void wait_for_stop(struct isci_host *ihost) 322 { 323 wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags)); 324 } 325 326 static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev) 327 { 328 wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags)); 329 } 330 331 static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) 332 { 333 wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags)); 334 } 335 336 static inline struct isci_host *dev_to_ihost(struct domain_device *dev) 337 { 338 return dev->port->ha->lldd_ha; 339 } 340 341 static inline struct isci_host *idev_to_ihost(struct isci_remote_device *idev) 342 { 343 return dev_to_ihost(idev->domain_dev); 344 } 345 346 /* we always use protocol engine group zero */ 347 #define ISCI_PEG 0 348 349 /* see sci_controller_io_tag_allocate|free for how seq and tci are built */ 350 #define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci) 351 352 /* these are returned by the hardware, so sanitize them */ 353 #define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1)) 354 #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) 355 356 /* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */ 357 #define ISCI_COALESCE_BASE 9 358 359 /* expander attached sata devices require 3 rnc slots */ 360 static inline int sci_remote_device_node_count(struct isci_remote_device *idev) 361 { 362 struct domain_device *dev = idev->domain_dev; 363 364 if (dev_is_sata(dev) && dev->parent) 365 return SCU_STP_REMOTE_NODE_COUNT; 366 return SCU_SSP_REMOTE_NODE_COUNT; 367 } 368 369 /** 370 * sci_controller_clear_invalid_phy() - 371 * 372 * This macro will clear the bit in the invalid phy mask for this controller 373 * object. This is used to control messages reported for invalid link up 374 * notifications. 375 */ 376 #define sci_controller_clear_invalid_phy(controller, phy) \ 377 ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) 378 379 static inline struct device *scirdev_to_dev(struct isci_remote_device *idev) 380 { 381 if (!idev || !idev->isci_port || !idev->isci_port->isci_host) 382 return NULL; 383 384 return &idev->isci_port->isci_host->pdev->dev; 385 } 386 387 static inline bool is_a2(struct pci_dev *pdev) 388 { 389 if (pdev->revision < 4) 390 return true; 391 return false; 392 } 393 394 static inline bool is_b0(struct pci_dev *pdev) 395 { 396 if (pdev->revision == 4) 397 return true; 398 return false; 399 } 400 401 static inline bool is_c0(struct pci_dev *pdev) 402 { 403 if (pdev->revision == 5) 404 return true; 405 return false; 406 } 407 408 static inline bool is_c1(struct pci_dev *pdev) 409 { 410 if (pdev->revision >= 6) 411 return true; 412 return false; 413 } 414 415 enum cable_selections { 416 short_cable = 0, 417 long_cable = 1, 418 medium_cable = 2, 419 undefined_cable = 3 420 }; 421 422 #define CABLE_OVERRIDE_DISABLED (0x10000) 423 424 static inline int is_cable_select_overridden(void) 425 { 426 return cable_selection_override < CABLE_OVERRIDE_DISABLED; 427 } 428 429 enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy); 430 void validate_cable_selections(struct isci_host *ihost); 431 char *lookup_cable_names(enum cable_selections); 432 433 /* set hw control for 'activity', even though active enclosures seem to drive 434 * the activity led on their own. Skip setting FSENG control on 'status' due 435 * to unexpected operation and 'error' due to not being a supported automatic 436 * FSENG output 437 */ 438 #define SGPIO_HW_CONTROL 0x00000443 439 440 static inline int isci_gpio_count(struct isci_host *ihost) 441 { 442 return ARRAY_SIZE(ihost->scu_registers->peg0.sgpio.output_data_select); 443 } 444 445 void sci_controller_post_request(struct isci_host *ihost, 446 u32 request); 447 void sci_controller_release_frame(struct isci_host *ihost, 448 u32 frame_index); 449 void sci_controller_copy_sata_response(void *response_buffer, 450 void *frame_header, 451 void *frame_buffer); 452 enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost, 453 struct isci_remote_device *idev, 454 u16 *node_id); 455 void sci_controller_free_remote_node_context( 456 struct isci_host *ihost, 457 struct isci_remote_device *idev, 458 u16 node_id); 459 460 struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag); 461 void sci_controller_power_control_queue_insert(struct isci_host *ihost, 462 struct isci_phy *iphy); 463 void sci_controller_power_control_queue_remove(struct isci_host *ihost, 464 struct isci_phy *iphy); 465 void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport, 466 struct isci_phy *iphy); 467 void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport, 468 struct isci_phy *iphy); 469 void sci_controller_remote_device_stopped(struct isci_host *ihost, 470 struct isci_remote_device *idev); 471 472 enum sci_status sci_controller_continue_io(struct isci_request *ireq); 473 int isci_host_scan_finished(struct Scsi_Host *, unsigned long); 474 void isci_host_start(struct Scsi_Host *); 475 u16 isci_alloc_tag(struct isci_host *ihost); 476 enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag); 477 void isci_tci_free(struct isci_host *ihost, u16 tci); 478 void ireq_done(struct isci_host *ihost, struct isci_request *ireq, struct sas_task *task); 479 480 int isci_host_init(struct isci_host *); 481 void isci_host_completion_routine(unsigned long data); 482 void isci_host_deinit(struct isci_host *); 483 void sci_controller_disable_interrupts(struct isci_host *ihost); 484 bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost); 485 void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status); 486 487 enum sci_status sci_controller_start_io( 488 struct isci_host *ihost, 489 struct isci_remote_device *idev, 490 struct isci_request *ireq); 491 492 enum sci_status sci_controller_start_task( 493 struct isci_host *ihost, 494 struct isci_remote_device *idev, 495 struct isci_request *ireq); 496 497 enum sci_status sci_controller_terminate_request( 498 struct isci_host *ihost, 499 struct isci_remote_device *idev, 500 struct isci_request *ireq); 501 502 enum sci_status sci_controller_complete_io( 503 struct isci_host *ihost, 504 struct isci_remote_device *idev, 505 struct isci_request *ireq); 506 507 void sci_port_configuration_agent_construct( 508 struct sci_port_configuration_agent *port_agent); 509 510 enum sci_status sci_port_configuration_agent_initialize( 511 struct isci_host *ihost, 512 struct sci_port_configuration_agent *port_agent); 513 514 int isci_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index, 515 u8 reg_count, u8 *write_data); 516 #endif 517