1 /************************************************************************** 2 * Initio 9100 device driver for Linux. 3 * 4 * Copyright (c) 1994-1998 Initio Corporation 5 * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl> 6 * Copyright (c) 2004 Christoph Hellwig <hch@lst.de> 7 * Copyright (c) 2007 Red Hat 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2, or (at your option) 12 * any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; see the file COPYING. If not, write to 21 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 22 * 23 * 24 ************************************************************************* 25 * 26 * DESCRIPTION: 27 * 28 * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host 29 * adapters 30 * 31 * 08/06/97 hc - v1.01h 32 * - Support inic-940 and inic-935 33 * 09/26/97 hc - v1.01i 34 * - Make correction from J.W. Schultz suggestion 35 * 10/13/97 hc - Support reset function 36 * 10/21/97 hc - v1.01j 37 * - Support 32 LUN (SCSI 3) 38 * 01/14/98 hc - v1.01k 39 * - Fix memory allocation problem 40 * 03/04/98 hc - v1.01l 41 * - Fix tape rewind which will hang the system problem 42 * - Set can_queue to initio_num_scb 43 * 06/25/98 hc - v1.01m 44 * - Get it work for kernel version >= 2.1.75 45 * - Dynamic assign SCSI bus reset holding time in initio_init() 46 * 07/02/98 hc - v1.01n 47 * - Support 0002134A 48 * 08/07/98 hc - v1.01o 49 * - Change the initio_abort_srb routine to use scsi_done. <01> 50 * 09/07/98 hl - v1.02 51 * - Change the INI9100U define and proc_dir_entry to 52 * reflect the newer Kernel 2.1.118, but the v1.o1o 53 * should work with Kernel 2.1.118. 54 * 09/20/98 wh - v1.02a 55 * - Support Abort command. 56 * - Handle reset routine. 57 * 09/21/98 hl - v1.03 58 * - remove comments. 59 * 12/09/98 bv - v1.03a 60 * - Removed unused code 61 * 12/13/98 bv - v1.03b 62 * - Remove cli() locking for kernels >= 2.1.95. This uses 63 * spinlocks to serialize access to the pSRB_head and 64 * pSRB_tail members of the HCS structure. 65 * 09/01/99 bv - v1.03d 66 * - Fixed a deadlock problem in SMP. 67 * 21/01/99 bv - v1.03e 68 * - Add support for the Domex 3192U PCI SCSI 69 * This is a slightly modified patch by 70 * Brian Macy <bmacy@sunshinecomputing.com> 71 * 22/02/99 bv - v1.03f 72 * - Didn't detect the INIC-950 in 2.0.x correctly. 73 * Now fixed. 74 * 05/07/99 bv - v1.03g 75 * - Changed the assumption that HZ = 100 76 * 10/17/03 mc - v1.04 77 * - added new DMA API support 78 * 06/01/04 jmd - v1.04a 79 * - Re-add reset_bus support 80 **************************************************************************/ 81 82 #include <linux/module.h> 83 #include <linux/errno.h> 84 #include <linux/delay.h> 85 #include <linux/pci.h> 86 #include <linux/init.h> 87 #include <linux/blkdev.h> 88 #include <linux/spinlock.h> 89 #include <linux/stat.h> 90 #include <linux/kernel.h> 91 #include <linux/proc_fs.h> 92 #include <linux/string.h> 93 #include <linux/interrupt.h> 94 #include <linux/ioport.h> 95 #include <linux/slab.h> 96 #include <linux/jiffies.h> 97 #include <linux/dma-mapping.h> 98 #include <asm/io.h> 99 100 #include <scsi/scsi.h> 101 #include <scsi/scsi_cmnd.h> 102 #include <scsi/scsi_device.h> 103 #include <scsi/scsi_host.h> 104 #include <scsi/scsi_tcq.h> 105 106 #include "initio.h" 107 108 #define SENSE_SIZE 14 109 110 #define i91u_MAXQUEUE 2 111 #define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a" 112 113 #define I950_DEVICE_ID 0x9500 /* Initio's inic-950 product ID */ 114 #define I940_DEVICE_ID 0x9400 /* Initio's inic-940 product ID */ 115 #define I935_DEVICE_ID 0x9401 /* Initio's inic-935 product ID */ 116 #define I920_DEVICE_ID 0x0002 /* Initio's other product ID */ 117 118 #ifdef DEBUG_i91u 119 static unsigned int i91u_debug = DEBUG_DEFAULT; 120 #endif 121 122 static int initio_tag_enable = 1; 123 124 #ifdef DEBUG_i91u 125 static int setup_debug = 0; 126 #endif 127 128 static void i91uSCBPost(u8 * pHcb, u8 * pScb); 129 130 /* PCI Devices supported by this driver */ 131 static struct pci_device_id i91u_pci_devices[] = { 132 { PCI_VENDOR_ID_INIT, I950_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 133 { PCI_VENDOR_ID_INIT, I940_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 134 { PCI_VENDOR_ID_INIT, I935_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 135 { PCI_VENDOR_ID_INIT, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 136 { PCI_VENDOR_ID_DOMEX, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 137 { } 138 }; 139 MODULE_DEVICE_TABLE(pci, i91u_pci_devices); 140 141 #define DEBUG_INTERRUPT 0 142 #define DEBUG_QUEUE 0 143 #define DEBUG_STATE 0 144 #define INT_DISC 0 145 146 /*--- forward references ---*/ 147 static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun); 148 static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host); 149 150 static int tulip_main(struct initio_host * host); 151 152 static int initio_next_state(struct initio_host * host); 153 static int initio_state_1(struct initio_host * host); 154 static int initio_state_2(struct initio_host * host); 155 static int initio_state_3(struct initio_host * host); 156 static int initio_state_4(struct initio_host * host); 157 static int initio_state_5(struct initio_host * host); 158 static int initio_state_6(struct initio_host * host); 159 static int initio_state_7(struct initio_host * host); 160 static int initio_xfer_data_in(struct initio_host * host); 161 static int initio_xfer_data_out(struct initio_host * host); 162 static int initio_xpad_in(struct initio_host * host); 163 static int initio_xpad_out(struct initio_host * host); 164 static int initio_status_msg(struct initio_host * host); 165 166 static int initio_msgin(struct initio_host * host); 167 static int initio_msgin_sync(struct initio_host * host); 168 static int initio_msgin_accept(struct initio_host * host); 169 static int initio_msgout_reject(struct initio_host * host); 170 static int initio_msgin_extend(struct initio_host * host); 171 172 static int initio_msgout_ide(struct initio_host * host); 173 static int initio_msgout_abort_targ(struct initio_host * host); 174 static int initio_msgout_abort_tag(struct initio_host * host); 175 176 static int initio_bus_device_reset(struct initio_host * host); 177 static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb); 178 static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb); 179 static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb); 180 static int int_initio_busfree(struct initio_host * host); 181 static int int_initio_scsi_rst(struct initio_host * host); 182 static int int_initio_bad_seq(struct initio_host * host); 183 static int int_initio_resel(struct initio_host * host); 184 static int initio_sync_done(struct initio_host * host); 185 static int wdtr_done(struct initio_host * host); 186 static int wait_tulip(struct initio_host * host); 187 static int initio_wait_done_disc(struct initio_host * host); 188 static int initio_wait_disc(struct initio_host * host); 189 static void tulip_scsi(struct initio_host * host); 190 static int initio_post_scsi_rst(struct initio_host * host); 191 192 static void initio_se2_ew_en(unsigned long base); 193 static void initio_se2_ew_ds(unsigned long base); 194 static int initio_se2_rd_all(unsigned long base); 195 static void initio_se2_update_all(unsigned long base); /* setup default pattern */ 196 static void initio_read_eeprom(unsigned long base); 197 198 /* ---- INTERNAL VARIABLES ---- */ 199 200 static NVRAM i91unvram; 201 static NVRAM *i91unvramp; 202 203 static u8 i91udftNvRam[64] = 204 { 205 /*----------- header -----------*/ 206 0x25, 0xc9, /* Signature */ 207 0x40, /* Size */ 208 0x01, /* Revision */ 209 /* -- Host Adapter Structure -- */ 210 0x95, /* ModelByte0 */ 211 0x00, /* ModelByte1 */ 212 0x00, /* ModelInfo */ 213 0x01, /* NumOfCh */ 214 NBC1_DEFAULT, /* BIOSConfig1 */ 215 0, /* BIOSConfig2 */ 216 0, /* HAConfig1 */ 217 0, /* HAConfig2 */ 218 /* SCSI channel 0 and target Structure */ 219 7, /* SCSIid */ 220 NCC1_DEFAULT, /* SCSIconfig1 */ 221 0, /* SCSIconfig2 */ 222 0x10, /* NumSCSItarget */ 223 224 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 225 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 226 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 227 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 228 229 /* SCSI channel 1 and target Structure */ 230 7, /* SCSIid */ 231 NCC1_DEFAULT, /* SCSIconfig1 */ 232 0, /* SCSIconfig2 */ 233 0x10, /* NumSCSItarget */ 234 235 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 236 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 237 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 238 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, 239 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 240 0, 0}; /* - CheckSum - */ 241 242 243 static u8 initio_rate_tbl[8] = /* fast 20 */ 244 { 245 /* nanosecond devide by 4 */ 246 12, /* 50ns, 20M */ 247 18, /* 75ns, 13.3M */ 248 25, /* 100ns, 10M */ 249 31, /* 125ns, 8M */ 250 37, /* 150ns, 6.6M */ 251 43, /* 175ns, 5.7M */ 252 50, /* 200ns, 5M */ 253 62 /* 250ns, 4M */ 254 }; 255 256 static void initio_do_pause(unsigned amount) 257 { 258 /* Pause for amount jiffies */ 259 unsigned long the_time = jiffies + amount; 260 261 while (time_before_eq(jiffies, the_time)) 262 cpu_relax(); 263 } 264 265 /*-- forward reference --*/ 266 267 /****************************************************************** 268 Input: instruction for Serial E2PROM 269 270 EX: se2_rd(0 call se2_instr() to send address and read command 271 272 StartBit OP_Code Address Data 273 --------- -------- ------------------ ------- 274 1 1 , 0 A5,A4,A3,A2,A1,A0 D15-D0 275 276 +----------------------------------------------------- 277 | 278 CS -----+ 279 +--+ +--+ +--+ +--+ +--+ 280 ^ | ^ | ^ | ^ | ^ | 281 | | | | | | | | | | 282 CLK -------+ +--+ +--+ +--+ +--+ +-- 283 (leading edge trigger) 284 285 +--1-----1--+ 286 | SB OP | OP A5 A4 287 DI ----+ +--0------------------ 288 (address and cmd sent to nvram) 289 290 -------------------------------------------+ 291 | 292 DO +--- 293 (data sent from nvram) 294 295 296 ******************************************************************/ 297 298 /** 299 * initio_se2_instr - bitbang an instruction 300 * @base: Base of InitIO controller 301 * @instr: Instruction for serial E2PROM 302 * 303 * Bitbang an instruction out to the serial E2Prom 304 */ 305 306 static void initio_se2_instr(unsigned long base, u8 instr) 307 { 308 int i; 309 u8 b; 310 311 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* cs+start bit */ 312 udelay(30); 313 outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */ 314 udelay(30); 315 316 for (i = 0; i < 8; i++) { 317 if (instr & 0x80) 318 b = SE2CS | SE2DO; /* -CLK+dataBit */ 319 else 320 b = SE2CS; /* -CLK */ 321 outb(b, base + TUL_NVRAM); 322 udelay(30); 323 outb(b | SE2CLK, base + TUL_NVRAM); /* +CLK */ 324 udelay(30); 325 instr <<= 1; 326 } 327 outb(SE2CS, base + TUL_NVRAM); /* -CLK */ 328 udelay(30); 329 } 330 331 332 /** 333 * initio_se2_ew_en - Enable erase/write 334 * @base: Base address of InitIO controller 335 * 336 * Enable erase/write state of serial EEPROM 337 */ 338 void initio_se2_ew_en(unsigned long base) 339 { 340 initio_se2_instr(base, 0x30); /* EWEN */ 341 outb(0, base + TUL_NVRAM); /* -CS */ 342 udelay(30); 343 } 344 345 346 /** 347 * initio_se2_ew_ds - Disable erase/write 348 * @base: Base address of InitIO controller 349 * 350 * Disable erase/write state of serial EEPROM 351 */ 352 void initio_se2_ew_ds(unsigned long base) 353 { 354 initio_se2_instr(base, 0); /* EWDS */ 355 outb(0, base + TUL_NVRAM); /* -CS */ 356 udelay(30); 357 } 358 359 360 /** 361 * initio_se2_rd - read E2PROM word 362 * @base: Base of InitIO controller 363 * @addr: Address of word in E2PROM 364 * 365 * Read a word from the NV E2PROM device 366 */ 367 static u16 initio_se2_rd(unsigned long base, u8 addr) 368 { 369 u8 instr, rb; 370 u16 val = 0; 371 int i; 372 373 instr = (u8) (addr | 0x80); 374 initio_se2_instr(base, instr); /* READ INSTR */ 375 376 for (i = 15; i >= 0; i--) { 377 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ 378 udelay(30); 379 outb(SE2CS, base + TUL_NVRAM); /* -CLK */ 380 381 /* sample data after the following edge of clock */ 382 rb = inb(base + TUL_NVRAM); 383 rb &= SE2DI; 384 val += (rb << i); 385 udelay(30); /* 6/20/95 */ 386 } 387 388 outb(0, base + TUL_NVRAM); /* no chip select */ 389 udelay(30); 390 return val; 391 } 392 393 /** 394 * initio_se2_wr - read E2PROM word 395 * @base: Base of InitIO controller 396 * @addr: Address of word in E2PROM 397 * @val: Value to write 398 * 399 * Write a word to the NV E2PROM device. Used when recovering from 400 * a problem with the NV. 401 */ 402 static void initio_se2_wr(unsigned long base, u8 addr, u16 val) 403 { 404 u8 rb; 405 u8 instr; 406 int i; 407 408 instr = (u8) (addr | 0x40); 409 initio_se2_instr(base, instr); /* WRITE INSTR */ 410 for (i = 15; i >= 0; i--) { 411 if (val & 0x8000) 412 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* -CLK+dataBit 1 */ 413 else 414 outb(SE2CS, base + TUL_NVRAM); /* -CLK+dataBit 0 */ 415 udelay(30); 416 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ 417 udelay(30); 418 val <<= 1; 419 } 420 outb(SE2CS, base + TUL_NVRAM); /* -CLK */ 421 udelay(30); 422 outb(0, base + TUL_NVRAM); /* -CS */ 423 udelay(30); 424 425 outb(SE2CS, base + TUL_NVRAM); /* +CS */ 426 udelay(30); 427 428 for (;;) { 429 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ 430 udelay(30); 431 outb(SE2CS, base + TUL_NVRAM); /* -CLK */ 432 udelay(30); 433 if ((rb = inb(base + TUL_NVRAM)) & SE2DI) 434 break; /* write complete */ 435 } 436 outb(0, base + TUL_NVRAM); /* -CS */ 437 } 438 439 /** 440 * initio_se2_rd_all - read hostadapter NV configuration 441 * @base: Base address of InitIO controller 442 * 443 * Reads the E2PROM data into main memory. Ensures that the checksum 444 * and header marker are valid. Returns 1 on success -1 on error. 445 */ 446 447 static int initio_se2_rd_all(unsigned long base) 448 { 449 int i; 450 u16 chksum = 0; 451 u16 *np; 452 453 i91unvramp = &i91unvram; 454 np = (u16 *) i91unvramp; 455 for (i = 0; i < 32; i++) 456 *np++ = initio_se2_rd(base, i); 457 458 /* Is signature "ini" ok ? */ 459 if (i91unvramp->NVM_Signature != INI_SIGNATURE) 460 return -1; 461 /* Is ckecksum ok ? */ 462 np = (u16 *) i91unvramp; 463 for (i = 0; i < 31; i++) 464 chksum += *np++; 465 if (i91unvramp->NVM_CheckSum != chksum) 466 return -1; 467 return 1; 468 } 469 470 /** 471 * initio_se2_update_all - Update E2PROM 472 * @base: Base of InitIO controller 473 * 474 * Update the E2PROM by wrting any changes into the E2PROM 475 * chip, rewriting the checksum. 476 */ 477 static void initio_se2_update_all(unsigned long base) 478 { /* setup default pattern */ 479 int i; 480 u16 chksum = 0; 481 u16 *np, *np1; 482 483 i91unvramp = &i91unvram; 484 /* Calculate checksum first */ 485 np = (u16 *) i91udftNvRam; 486 for (i = 0; i < 31; i++) 487 chksum += *np++; 488 *np = chksum; 489 initio_se2_ew_en(base); /* Enable write */ 490 491 np = (u16 *) i91udftNvRam; 492 np1 = (u16 *) i91unvramp; 493 for (i = 0; i < 32; i++, np++, np1++) { 494 if (*np != *np1) 495 initio_se2_wr(base, i, *np); 496 } 497 initio_se2_ew_ds(base); /* Disable write */ 498 } 499 500 /** 501 * initio_read_eeprom - Retrieve configuration 502 * @base: Base of InitIO Host Adapter 503 * 504 * Retrieve the host adapter configuration data from E2Prom. If the 505 * data is invalid then the defaults are used and are also restored 506 * into the E2PROM. This forms the access point for the SCSI driver 507 * into the E2PROM layer, the other functions for the E2PROM are all 508 * internal use. 509 * 510 * Must be called single threaded, uses a shared global area. 511 */ 512 513 static void initio_read_eeprom(unsigned long base) 514 { 515 u8 gctrl; 516 517 i91unvramp = &i91unvram; 518 /* Enable EEProm programming */ 519 gctrl = inb(base + TUL_GCTRL); 520 outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL); 521 if (initio_se2_rd_all(base) != 1) { 522 initio_se2_update_all(base); /* setup default pattern */ 523 initio_se2_rd_all(base); /* load again */ 524 } 525 /* Disable EEProm programming */ 526 gctrl = inb(base + TUL_GCTRL); 527 outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL); 528 } 529 530 /** 531 * initio_stop_bm - stop bus master 532 * @host: InitIO we are stopping 533 * 534 * Stop any pending DMA operation, aborting the DMA if necessary 535 */ 536 537 static void initio_stop_bm(struct initio_host * host) 538 { 539 540 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */ 541 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd); 542 /* wait Abort DMA xfer done */ 543 while ((inb(host->addr + TUL_Int) & XABT) == 0) 544 cpu_relax(); 545 } 546 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 547 } 548 549 /** 550 * initio_reset_scsi - Reset SCSI host controller 551 * @host: InitIO host to reset 552 * @seconds: Recovery time 553 * 554 * Perform a full reset of the SCSI subsystem. 555 */ 556 557 static int initio_reset_scsi(struct initio_host * host, int seconds) 558 { 559 outb(TSC_RST_BUS, host->addr + TUL_SCtrl0); 560 561 while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT)) 562 cpu_relax(); 563 564 /* reset tulip chip */ 565 outb(0, host->addr + TUL_SSignal); 566 567 /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */ 568 /* SONY 5200 tape drive won't work if only stall for 1 sec */ 569 /* FIXME: this is a very long busy wait right now */ 570 initio_do_pause(seconds * HZ); 571 572 inb(host->addr + TUL_SInt); 573 return SCSI_RESET_SUCCESS; 574 } 575 576 /** 577 * initio_init - set up an InitIO host adapter 578 * @host: InitIO host adapter 579 * @num_scbs: Number of SCBS 580 * @bios_addr: BIOS address 581 * 582 * Set up the host adapter and devices according to the configuration 583 * retrieved from the E2PROM. 584 * 585 * Locking: Calls E2PROM layer code which is not re-enterable so must 586 * run single threaded for now. 587 */ 588 589 static void initio_init(struct initio_host * host, u8 *bios_addr) 590 { 591 int i; 592 u8 *flags; 593 u8 *heads; 594 595 /* Get E2Prom configuration */ 596 initio_read_eeprom(host->addr); 597 if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8) 598 host->max_tar = 8; 599 else 600 host->max_tar = 16; 601 602 host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1; 603 604 host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID; 605 host->idmask = ~(1 << host->scsi_id); 606 607 #ifdef CHK_PARITY 608 /* Enable parity error response */ 609 outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD); 610 #endif 611 612 /* Mask all the interrupt */ 613 outb(0x1F, host->addr + TUL_Mask); 614 615 initio_stop_bm(host); 616 /* --- Initialize the tulip --- */ 617 outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0); 618 619 /* program HBA's SCSI ID */ 620 outb(host->scsi_id << 4, host->addr + TUL_SScsiId); 621 622 /* Enable Initiator Mode ,phase latch,alternate sync period mode, 623 disable SCSI reset */ 624 if (host->config & HCC_EN_PAR) 625 host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR); 626 else 627 host->sconf1 = (TSC_INITDEFAULT); 628 outb(host->sconf1, host->addr + TUL_SConfig); 629 630 /* Enable HW reselect */ 631 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); 632 633 outb(0, host->addr + TUL_SPeriod); 634 635 /* selection time out = 250 ms */ 636 outb(153, host->addr + TUL_STimeOut); 637 638 /* Enable SCSI terminator */ 639 outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)), 640 host->addr + TUL_XCtrl); 641 outb(((host->config & HCC_AUTO_TERM) >> 4) | 642 (inb(host->addr + TUL_GCTRL1) & 0xFE), 643 host->addr + TUL_GCTRL1); 644 645 for (i = 0, 646 flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config), 647 heads = bios_addr + 0x180; 648 i < host->max_tar; 649 i++, flags++) { 650 host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE); 651 if (host->targets[i].flags & TCF_EN_255) 652 host->targets[i].drv_flags = TCF_DRV_255_63; 653 else 654 host->targets[i].drv_flags = 0; 655 host->targets[i].js_period = 0; 656 host->targets[i].sconfig0 = host->sconf1; 657 host->targets[i].heads = *heads++; 658 if (host->targets[i].heads == 255) 659 host->targets[i].drv_flags = TCF_DRV_255_63; 660 else 661 host->targets[i].drv_flags = 0; 662 host->targets[i].sectors = *heads++; 663 host->targets[i].flags &= ~TCF_BUSY; 664 host->act_tags[i] = 0; 665 host->max_tags[i] = 0xFF; 666 } /* for */ 667 printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n", 668 host->addr, host->pci_dev->irq, 669 host->bios_addr, host->scsi_id); 670 /* Reset SCSI Bus */ 671 if (host->config & HCC_SCSI_RESET) { 672 printk(KERN_INFO "i91u: Reset SCSI Bus ... \n"); 673 initio_reset_scsi(host, 10); 674 } 675 outb(0x17, host->addr + TUL_SCFG1); 676 outb(0xE9, host->addr + TUL_SIntEnable); 677 } 678 679 /** 680 * initio_alloc_scb - Allocate an SCB 681 * @host: InitIO host we are allocating for 682 * 683 * Walk the SCB list for the controller and allocate a free SCB if 684 * one exists. 685 */ 686 static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host) 687 { 688 struct scsi_ctrl_blk *scb; 689 unsigned long flags; 690 691 spin_lock_irqsave(&host->avail_lock, flags); 692 if ((scb = host->first_avail) != NULL) { 693 #if DEBUG_QUEUE 694 printk("find scb at %p\n", scb); 695 #endif 696 if ((host->first_avail = scb->next) == NULL) 697 host->last_avail = NULL; 698 scb->next = NULL; 699 scb->status = SCB_RENT; 700 } 701 spin_unlock_irqrestore(&host->avail_lock, flags); 702 return scb; 703 } 704 705 /** 706 * initio_release_scb - Release an SCB 707 * @host: InitIO host that owns the SCB 708 * @cmnd: SCB command block being returned 709 * 710 * Return an allocated SCB to the host free list 711 */ 712 713 static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd) 714 { 715 unsigned long flags; 716 717 #if DEBUG_QUEUE 718 printk("Release SCB %p; ", cmnd); 719 #endif 720 spin_lock_irqsave(&(host->avail_lock), flags); 721 cmnd->srb = NULL; 722 cmnd->status = 0; 723 cmnd->next = NULL; 724 if (host->last_avail != NULL) { 725 host->last_avail->next = cmnd; 726 host->last_avail = cmnd; 727 } else { 728 host->first_avail = cmnd; 729 host->last_avail = cmnd; 730 } 731 spin_unlock_irqrestore(&(host->avail_lock), flags); 732 } 733 734 /***************************************************************************/ 735 static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) 736 { 737 738 #if DEBUG_QUEUE 739 printk("Append pend SCB %p; ", scbp); 740 #endif 741 scbp->status = SCB_PEND; 742 scbp->next = NULL; 743 if (host->last_pending != NULL) { 744 host->last_pending->next = scbp; 745 host->last_pending = scbp; 746 } else { 747 host->first_pending = scbp; 748 host->last_pending = scbp; 749 } 750 } 751 752 /***************************************************************************/ 753 static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) 754 { 755 756 #if DEBUG_QUEUE 757 printk("Push pend SCB %p; ", scbp); 758 #endif 759 scbp->status = SCB_PEND; 760 if ((scbp->next = host->first_pending) != NULL) { 761 host->first_pending = scbp; 762 } else { 763 host->first_pending = scbp; 764 host->last_pending = scbp; 765 } 766 } 767 768 static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host) 769 { 770 struct scsi_ctrl_blk *first; 771 772 773 first = host->first_pending; 774 while (first != NULL) { 775 if (first->opcode != ExecSCSI) 776 return first; 777 if (first->tagmsg == 0) { 778 if ((host->act_tags[first->target] == 0) && 779 !(host->targets[first->target].flags & TCF_BUSY)) 780 return first; 781 } else { 782 if ((host->act_tags[first->target] >= 783 host->max_tags[first->target]) | 784 (host->targets[first->target].flags & TCF_BUSY)) { 785 first = first->next; 786 continue; 787 } 788 return first; 789 } 790 first = first->next; 791 } 792 return first; 793 } 794 795 static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) 796 { 797 struct scsi_ctrl_blk *tmp, *prev; 798 799 #if DEBUG_QUEUE 800 printk("unlink pend SCB %p; ", scb); 801 #endif 802 803 prev = tmp = host->first_pending; 804 while (tmp != NULL) { 805 if (scb == tmp) { /* Unlink this SCB */ 806 if (tmp == host->first_pending) { 807 if ((host->first_pending = tmp->next) == NULL) 808 host->last_pending = NULL; 809 } else { 810 prev->next = tmp->next; 811 if (tmp == host->last_pending) 812 host->last_pending = prev; 813 } 814 tmp->next = NULL; 815 break; 816 } 817 prev = tmp; 818 tmp = tmp->next; 819 } 820 } 821 822 static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) 823 { 824 825 #if DEBUG_QUEUE 826 printk("append busy SCB %p; ", scbp); 827 #endif 828 if (scbp->tagmsg) 829 host->act_tags[scbp->target]++; 830 else 831 host->targets[scbp->target].flags |= TCF_BUSY; 832 scbp->status = SCB_BUSY; 833 scbp->next = NULL; 834 if (host->last_busy != NULL) { 835 host->last_busy->next = scbp; 836 host->last_busy = scbp; 837 } else { 838 host->first_busy = scbp; 839 host->last_busy = scbp; 840 } 841 } 842 843 /***************************************************************************/ 844 static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host) 845 { 846 struct scsi_ctrl_blk *tmp; 847 848 849 if ((tmp = host->first_busy) != NULL) { 850 if ((host->first_busy = tmp->next) == NULL) 851 host->last_busy = NULL; 852 tmp->next = NULL; 853 if (tmp->tagmsg) 854 host->act_tags[tmp->target]--; 855 else 856 host->targets[tmp->target].flags &= ~TCF_BUSY; 857 } 858 #if DEBUG_QUEUE 859 printk("Pop busy SCB %p; ", tmp); 860 #endif 861 return tmp; 862 } 863 864 /***************************************************************************/ 865 static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) 866 { 867 struct scsi_ctrl_blk *tmp, *prev; 868 869 #if DEBUG_QUEUE 870 printk("unlink busy SCB %p; ", scb); 871 #endif 872 873 prev = tmp = host->first_busy; 874 while (tmp != NULL) { 875 if (scb == tmp) { /* Unlink this SCB */ 876 if (tmp == host->first_busy) { 877 if ((host->first_busy = tmp->next) == NULL) 878 host->last_busy = NULL; 879 } else { 880 prev->next = tmp->next; 881 if (tmp == host->last_busy) 882 host->last_busy = prev; 883 } 884 tmp->next = NULL; 885 if (tmp->tagmsg) 886 host->act_tags[tmp->target]--; 887 else 888 host->targets[tmp->target].flags &= ~TCF_BUSY; 889 break; 890 } 891 prev = tmp; 892 tmp = tmp->next; 893 } 894 return; 895 } 896 897 struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun) 898 { 899 struct scsi_ctrl_blk *tmp, *prev; 900 u16 scbp_tarlun; 901 902 903 prev = tmp = host->first_busy; 904 while (tmp != NULL) { 905 scbp_tarlun = (tmp->lun << 8) | (tmp->target); 906 if (scbp_tarlun == tarlun) { /* Unlink this SCB */ 907 break; 908 } 909 prev = tmp; 910 tmp = tmp->next; 911 } 912 #if DEBUG_QUEUE 913 printk("find busy SCB %p; ", tmp); 914 #endif 915 return tmp; 916 } 917 918 static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) 919 { 920 #if DEBUG_QUEUE 921 printk("append done SCB %p; ", scbp); 922 #endif 923 924 scbp->status = SCB_DONE; 925 scbp->next = NULL; 926 if (host->last_done != NULL) { 927 host->last_done->next = scbp; 928 host->last_done = scbp; 929 } else { 930 host->first_done = scbp; 931 host->last_done = scbp; 932 } 933 } 934 935 struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host) 936 { 937 struct scsi_ctrl_blk *tmp; 938 939 if ((tmp = host->first_done) != NULL) { 940 if ((host->first_done = tmp->next) == NULL) 941 host->last_done = NULL; 942 tmp->next = NULL; 943 } 944 #if DEBUG_QUEUE 945 printk("find done SCB %p; ",tmp); 946 #endif 947 return tmp; 948 } 949 950 static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp) 951 { 952 unsigned long flags; 953 struct scsi_ctrl_blk *tmp, *prev; 954 955 spin_lock_irqsave(&host->semaph_lock, flags); 956 957 if ((host->semaph == 0) && (host->active == NULL)) { 958 /* disable Jasmin SCSI Int */ 959 outb(0x1F, host->addr + TUL_Mask); 960 spin_unlock_irqrestore(&host->semaph_lock, flags); 961 /* FIXME: synchronize_irq needed ? */ 962 tulip_main(host); 963 spin_lock_irqsave(&host->semaph_lock, flags); 964 host->semaph = 1; 965 outb(0x0F, host->addr + TUL_Mask); 966 spin_unlock_irqrestore(&host->semaph_lock, flags); 967 return SCSI_ABORT_SNOOZE; 968 } 969 prev = tmp = host->first_pending; /* Check Pend queue */ 970 while (tmp != NULL) { 971 /* 07/27/98 */ 972 if (tmp->srb == srbp) { 973 if (tmp == host->active) { 974 spin_unlock_irqrestore(&host->semaph_lock, flags); 975 return SCSI_ABORT_BUSY; 976 } else if (tmp == host->first_pending) { 977 if ((host->first_pending = tmp->next) == NULL) 978 host->last_pending = NULL; 979 } else { 980 prev->next = tmp->next; 981 if (tmp == host->last_pending) 982 host->last_pending = prev; 983 } 984 tmp->hastat = HOST_ABORTED; 985 tmp->flags |= SCF_DONE; 986 if (tmp->flags & SCF_POST) 987 (*tmp->post) ((u8 *) host, (u8 *) tmp); 988 spin_unlock_irqrestore(&host->semaph_lock, flags); 989 return SCSI_ABORT_SUCCESS; 990 } 991 prev = tmp; 992 tmp = tmp->next; 993 } 994 995 prev = tmp = host->first_busy; /* Check Busy queue */ 996 while (tmp != NULL) { 997 if (tmp->srb == srbp) { 998 if (tmp == host->active) { 999 spin_unlock_irqrestore(&host->semaph_lock, flags); 1000 return SCSI_ABORT_BUSY; 1001 } else if (tmp->tagmsg == 0) { 1002 spin_unlock_irqrestore(&host->semaph_lock, flags); 1003 return SCSI_ABORT_BUSY; 1004 } else { 1005 host->act_tags[tmp->target]--; 1006 if (tmp == host->first_busy) { 1007 if ((host->first_busy = tmp->next) == NULL) 1008 host->last_busy = NULL; 1009 } else { 1010 prev->next = tmp->next; 1011 if (tmp == host->last_busy) 1012 host->last_busy = prev; 1013 } 1014 tmp->next = NULL; 1015 1016 1017 tmp->hastat = HOST_ABORTED; 1018 tmp->flags |= SCF_DONE; 1019 if (tmp->flags & SCF_POST) 1020 (*tmp->post) ((u8 *) host, (u8 *) tmp); 1021 spin_unlock_irqrestore(&host->semaph_lock, flags); 1022 return SCSI_ABORT_SUCCESS; 1023 } 1024 } 1025 prev = tmp; 1026 tmp = tmp->next; 1027 } 1028 spin_unlock_irqrestore(&host->semaph_lock, flags); 1029 return SCSI_ABORT_NOT_RUNNING; 1030 } 1031 1032 /***************************************************************************/ 1033 static int initio_bad_seq(struct initio_host * host) 1034 { 1035 struct scsi_ctrl_blk *scb; 1036 1037 printk("initio_bad_seg c=%d\n", host->index); 1038 1039 if ((scb = host->active) != NULL) { 1040 initio_unlink_busy_scb(host, scb); 1041 scb->hastat = HOST_BAD_PHAS; 1042 scb->tastat = 0; 1043 initio_append_done_scb(host, scb); 1044 } 1045 initio_stop_bm(host); 1046 initio_reset_scsi(host, 8); /* 7/29/98 */ 1047 return initio_post_scsi_rst(host); 1048 } 1049 1050 1051 /************************************************************************/ 1052 static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) 1053 { 1054 unsigned long flags; 1055 1056 scb->mode = 0; 1057 1058 scb->sgidx = 0; 1059 scb->sgmax = scb->sglen; 1060 1061 spin_lock_irqsave(&host->semaph_lock, flags); 1062 1063 initio_append_pend_scb(host, scb); /* Append this SCB to Pending queue */ 1064 1065 /* VVVVV 07/21/98 */ 1066 if (host->semaph == 1) { 1067 /* Disable Jasmin SCSI Int */ 1068 outb(0x1F, host->addr + TUL_Mask); 1069 host->semaph = 0; 1070 spin_unlock_irqrestore(&host->semaph_lock, flags); 1071 1072 tulip_main(host); 1073 1074 spin_lock_irqsave(&host->semaph_lock, flags); 1075 host->semaph = 1; 1076 outb(0x0F, host->addr + TUL_Mask); 1077 } 1078 spin_unlock_irqrestore(&host->semaph_lock, flags); 1079 return; 1080 } 1081 1082 /***************************************************************************/ 1083 static int initio_isr(struct initio_host * host) 1084 { 1085 if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) { 1086 if (host->semaph == 1) { 1087 outb(0x1F, host->addr + TUL_Mask); 1088 /* Disable Tulip SCSI Int */ 1089 host->semaph = 0; 1090 1091 tulip_main(host); 1092 1093 host->semaph = 1; 1094 outb(0x0F, host->addr + TUL_Mask); 1095 return 1; 1096 } 1097 } 1098 return 0; 1099 } 1100 1101 static int tulip_main(struct initio_host * host) 1102 { 1103 struct scsi_ctrl_blk *scb; 1104 1105 for (;;) { 1106 tulip_scsi(host); /* Call tulip_scsi */ 1107 1108 /* Walk the list of completed SCBs */ 1109 while ((scb = initio_find_done_scb(host)) != NULL) { /* find done entry */ 1110 if (scb->tastat == INI_QUEUE_FULL) { 1111 host->max_tags[scb->target] = 1112 host->act_tags[scb->target] - 1; 1113 scb->tastat = 0; 1114 initio_append_pend_scb(host, scb); 1115 continue; 1116 } 1117 if (!(scb->mode & SCM_RSENS)) { /* not in auto req. sense mode */ 1118 if (scb->tastat == 2) { 1119 1120 /* clr sync. nego flag */ 1121 1122 if (scb->flags & SCF_SENSE) { 1123 u8 len; 1124 len = scb->senselen; 1125 if (len == 0) 1126 len = 1; 1127 scb->buflen = scb->senselen; 1128 scb->bufptr = scb->senseptr; 1129 scb->flags &= ~(SCF_SG | SCF_DIR); /* for xfer_data_in */ 1130 /* so, we won't report wrong direction in xfer_data_in, 1131 and won't report HOST_DO_DU in state_6 */ 1132 scb->mode = SCM_RSENS; 1133 scb->ident &= 0xBF; /* Disable Disconnect */ 1134 scb->tagmsg = 0; 1135 scb->tastat = 0; 1136 scb->cdblen = 6; 1137 scb->cdb[0] = SCSICMD_RequestSense; 1138 scb->cdb[1] = 0; 1139 scb->cdb[2] = 0; 1140 scb->cdb[3] = 0; 1141 scb->cdb[4] = len; 1142 scb->cdb[5] = 0; 1143 initio_push_pend_scb(host, scb); 1144 break; 1145 } 1146 } 1147 } else { /* in request sense mode */ 1148 1149 if (scb->tastat == 2) { /* check contition status again after sending 1150 requset sense cmd 0x3 */ 1151 scb->hastat = HOST_BAD_PHAS; 1152 } 1153 scb->tastat = 2; 1154 } 1155 scb->flags |= SCF_DONE; 1156 if (scb->flags & SCF_POST) { 1157 /* FIXME: only one post method and lose casts */ 1158 (*scb->post) ((u8 *) host, (u8 *) scb); 1159 } 1160 } /* while */ 1161 /* find_active: */ 1162 if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING) 1163 continue; 1164 if (host->active) /* return to OS and wait for xfer_done_ISR/Selected_ISR */ 1165 return 1; /* return to OS, enable interrupt */ 1166 /* Check pending SCB */ 1167 if (initio_find_first_pend_scb(host) == NULL) 1168 return 1; /* return to OS, enable interrupt */ 1169 } /* End of for loop */ 1170 /* statement won't reach here */ 1171 } 1172 1173 static void tulip_scsi(struct initio_host * host) 1174 { 1175 struct scsi_ctrl_blk *scb; 1176 struct target_control *active_tc; 1177 1178 /* make sure to service interrupt asap */ 1179 if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) { 1180 host->phase = host->jsstatus0 & TSS_PH_MASK; 1181 host->jsstatus1 = inb(host->addr + TUL_SStatus1); 1182 host->jsint = inb(host->addr + TUL_SInt); 1183 if (host->jsint & TSS_SCSIRST_INT) { /* SCSI bus reset detected */ 1184 int_initio_scsi_rst(host); 1185 return; 1186 } 1187 if (host->jsint & TSS_RESEL_INT) { /* if selected/reselected interrupt */ 1188 if (int_initio_resel(host) == 0) 1189 initio_next_state(host); 1190 return; 1191 } 1192 if (host->jsint & TSS_SEL_TIMEOUT) { 1193 int_initio_busfree(host); 1194 return; 1195 } 1196 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ 1197 int_initio_busfree(host); /* unexpected bus free or sel timeout */ 1198 return; 1199 } 1200 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) { /* func complete or Bus service */ 1201 if ((scb = host->active) != NULL) 1202 initio_next_state(host); 1203 return; 1204 } 1205 } 1206 if (host->active != NULL) 1207 return; 1208 1209 if ((scb = initio_find_first_pend_scb(host)) == NULL) 1210 return; 1211 1212 /* program HBA's SCSI ID & target SCSI ID */ 1213 outb((host->scsi_id << 4) | (scb->target & 0x0F), 1214 host->addr + TUL_SScsiId); 1215 if (scb->opcode == ExecSCSI) { 1216 active_tc = &host->targets[scb->target]; 1217 1218 if (scb->tagmsg) 1219 active_tc->drv_flags |= TCF_DRV_EN_TAG; 1220 else 1221 active_tc->drv_flags &= ~TCF_DRV_EN_TAG; 1222 1223 outb(active_tc->js_period, host->addr + TUL_SPeriod); 1224 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { /* do wdtr negotiation */ 1225 initio_select_atn_stop(host, scb); 1226 } else { 1227 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { /* do sync negotiation */ 1228 initio_select_atn_stop(host, scb); 1229 } else { 1230 if (scb->tagmsg) 1231 initio_select_atn3(host, scb); 1232 else 1233 initio_select_atn(host, scb); 1234 } 1235 } 1236 if (scb->flags & SCF_POLL) { 1237 while (wait_tulip(host) != -1) { 1238 if (initio_next_state(host) == -1) 1239 break; 1240 } 1241 } 1242 } else if (scb->opcode == BusDevRst) { 1243 initio_select_atn_stop(host, scb); 1244 scb->next_state = 8; 1245 if (scb->flags & SCF_POLL) { 1246 while (wait_tulip(host) != -1) { 1247 if (initio_next_state(host) == -1) 1248 break; 1249 } 1250 } 1251 } else if (scb->opcode == AbortCmd) { 1252 if (initio_abort_srb(host, scb->srb) != 0) { 1253 initio_unlink_pend_scb(host, scb); 1254 initio_release_scb(host, scb); 1255 } else { 1256 scb->opcode = BusDevRst; 1257 initio_select_atn_stop(host, scb); 1258 scb->next_state = 8; 1259 } 1260 } else { 1261 initio_unlink_pend_scb(host, scb); 1262 scb->hastat = 0x16; /* bad command */ 1263 initio_append_done_scb(host, scb); 1264 } 1265 return; 1266 } 1267 1268 /** 1269 * initio_next_state - Next SCSI state 1270 * @host: InitIO host we are processing 1271 * 1272 * Progress the active command block along the state machine 1273 * until we hit a state which we must wait for activity to occur. 1274 * 1275 * Returns zero or a negative code. 1276 */ 1277 1278 static int initio_next_state(struct initio_host * host) 1279 { 1280 int next; 1281 1282 next = host->active->next_state; 1283 for (;;) { 1284 switch (next) { 1285 case 1: 1286 next = initio_state_1(host); 1287 break; 1288 case 2: 1289 next = initio_state_2(host); 1290 break; 1291 case 3: 1292 next = initio_state_3(host); 1293 break; 1294 case 4: 1295 next = initio_state_4(host); 1296 break; 1297 case 5: 1298 next = initio_state_5(host); 1299 break; 1300 case 6: 1301 next = initio_state_6(host); 1302 break; 1303 case 7: 1304 next = initio_state_7(host); 1305 break; 1306 case 8: 1307 return initio_bus_device_reset(host); 1308 default: 1309 return initio_bad_seq(host); 1310 } 1311 if (next <= 0) 1312 return next; 1313 } 1314 } 1315 1316 1317 /** 1318 * initio_state_1 - SCSI state machine 1319 * @host: InitIO host we are controlling 1320 * 1321 * Perform SCSI state processing for Select/Attention/Stop 1322 */ 1323 1324 static int initio_state_1(struct initio_host * host) 1325 { 1326 struct scsi_ctrl_blk *scb = host->active; 1327 struct target_control *active_tc = host->active_tc; 1328 #if DEBUG_STATE 1329 printk("-s1-"); 1330 #endif 1331 1332 /* Move the SCB from pending to busy */ 1333 initio_unlink_pend_scb(host, scb); 1334 initio_append_busy_scb(host, scb); 1335 1336 outb(active_tc->sconfig0, host->addr + TUL_SConfig ); 1337 /* ATN on */ 1338 if (host->phase == MSG_OUT) { 1339 outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1); 1340 outb(scb->ident, host->addr + TUL_SFifo); 1341 1342 if (scb->tagmsg) { 1343 outb(scb->tagmsg, host->addr + TUL_SFifo); 1344 outb(scb->tagid, host->addr + TUL_SFifo); 1345 } 1346 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { 1347 active_tc->flags |= TCF_WDTR_DONE; 1348 outb(MSG_EXTEND, host->addr + TUL_SFifo); 1349 outb(2, host->addr + TUL_SFifo); /* Extended msg length */ 1350 outb(3, host->addr + TUL_SFifo); /* Sync request */ 1351 outb(1, host->addr + TUL_SFifo); /* Start from 16 bits */ 1352 } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { 1353 active_tc->flags |= TCF_SYNC_DONE; 1354 outb(MSG_EXTEND, host->addr + TUL_SFifo); 1355 outb(3, host->addr + TUL_SFifo); /* extended msg length */ 1356 outb(1, host->addr + TUL_SFifo); /* sync request */ 1357 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo); 1358 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */ 1359 } 1360 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1361 if (wait_tulip(host) == -1) 1362 return -1; 1363 } 1364 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1365 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); 1366 /* Into before CDB xfer */ 1367 return 3; 1368 } 1369 1370 1371 /** 1372 * initio_state_2 - SCSI state machine 1373 * @host: InitIO host we are controlling 1374 * 1375 * state after selection with attention 1376 * state after selection with attention3 1377 */ 1378 1379 static int initio_state_2(struct initio_host * host) 1380 { 1381 struct scsi_ctrl_blk *scb = host->active; 1382 struct target_control *active_tc = host->active_tc; 1383 #if DEBUG_STATE 1384 printk("-s2-"); 1385 #endif 1386 1387 initio_unlink_pend_scb(host, scb); 1388 initio_append_busy_scb(host, scb); 1389 1390 outb(active_tc->sconfig0, host->addr + TUL_SConfig); 1391 1392 if (host->jsstatus1 & TSS_CMD_PH_CMP) 1393 return 4; 1394 1395 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1396 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); 1397 /* Into before CDB xfer */ 1398 return 3; 1399 } 1400 1401 /** 1402 * initio_state_3 - SCSI state machine 1403 * @host: InitIO host we are controlling 1404 * 1405 * state before CDB xfer is done 1406 */ 1407 1408 static int initio_state_3(struct initio_host * host) 1409 { 1410 struct scsi_ctrl_blk *scb = host->active; 1411 struct target_control *active_tc = host->active_tc; 1412 int i; 1413 1414 #if DEBUG_STATE 1415 printk("-s3-"); 1416 #endif 1417 for (;;) { 1418 switch (host->phase) { 1419 case CMD_OUT: /* Command out phase */ 1420 for (i = 0; i < (int) scb->cdblen; i++) 1421 outb(scb->cdb[i], host->addr + TUL_SFifo); 1422 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1423 if (wait_tulip(host) == -1) 1424 return -1; 1425 if (host->phase == CMD_OUT) 1426 return initio_bad_seq(host); 1427 return 4; 1428 1429 case MSG_IN: /* Message in phase */ 1430 scb->next_state = 3; 1431 if (initio_msgin(host) == -1) 1432 return -1; 1433 break; 1434 1435 case STATUS_IN: /* Status phase */ 1436 if (initio_status_msg(host) == -1) 1437 return -1; 1438 break; 1439 1440 case MSG_OUT: /* Message out phase */ 1441 if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) { 1442 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ 1443 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1444 if (wait_tulip(host) == -1) 1445 return -1; 1446 } else { 1447 active_tc->flags |= TCF_SYNC_DONE; 1448 1449 outb(MSG_EXTEND, host->addr + TUL_SFifo); 1450 outb(3, host->addr + TUL_SFifo); /* ext. msg len */ 1451 outb(1, host->addr + TUL_SFifo); /* sync request */ 1452 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo); 1453 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */ 1454 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1455 if (wait_tulip(host) == -1) 1456 return -1; 1457 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1458 outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal); 1459 1460 } 1461 break; 1462 default: 1463 return initio_bad_seq(host); 1464 } 1465 } 1466 } 1467 1468 /** 1469 * initio_state_4 - SCSI state machine 1470 * @host: InitIO host we are controlling 1471 * 1472 * SCSI state machine. State 4 1473 */ 1474 1475 static int initio_state_4(struct initio_host * host) 1476 { 1477 struct scsi_ctrl_blk *scb = host->active; 1478 1479 #if DEBUG_STATE 1480 printk("-s4-"); 1481 #endif 1482 if ((scb->flags & SCF_DIR) == SCF_NO_XF) { 1483 return 6; /* Go to state 6 (After data) */ 1484 } 1485 for (;;) { 1486 if (scb->buflen == 0) 1487 return 6; 1488 1489 switch (host->phase) { 1490 1491 case STATUS_IN: /* Status phase */ 1492 if ((scb->flags & SCF_DIR) != 0) /* if direction bit set then report data underrun */ 1493 scb->hastat = HOST_DO_DU; 1494 if ((initio_status_msg(host)) == -1) 1495 return -1; 1496 break; 1497 1498 case MSG_IN: /* Message in phase */ 1499 scb->next_state = 0x4; 1500 if (initio_msgin(host) == -1) 1501 return -1; 1502 break; 1503 1504 case MSG_OUT: /* Message out phase */ 1505 if (host->jsstatus0 & TSS_PAR_ERROR) { 1506 scb->buflen = 0; 1507 scb->hastat = HOST_DO_DU; 1508 if (initio_msgout_ide(host) == -1) 1509 return -1; 1510 return 6; 1511 } else { 1512 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ 1513 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1514 if (wait_tulip(host) == -1) 1515 return -1; 1516 } 1517 break; 1518 1519 case DATA_IN: /* Data in phase */ 1520 return initio_xfer_data_in(host); 1521 1522 case DATA_OUT: /* Data out phase */ 1523 return initio_xfer_data_out(host); 1524 1525 default: 1526 return initio_bad_seq(host); 1527 } 1528 } 1529 } 1530 1531 1532 /** 1533 * initio_state_5 - SCSI state machine 1534 * @host: InitIO host we are controlling 1535 * 1536 * State after dma xfer done or phase change before xfer done 1537 */ 1538 1539 static int initio_state_5(struct initio_host * host) 1540 { 1541 struct scsi_ctrl_blk *scb = host->active; 1542 long cnt, xcnt; /* cannot use unsigned !! code: if (xcnt < 0) */ 1543 1544 #if DEBUG_STATE 1545 printk("-s5-"); 1546 #endif 1547 /*------ get remaining count -------*/ 1548 cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF; 1549 1550 if (inb(host->addr + TUL_XCmd) & 0x20) { 1551 /* ----------------------- DATA_IN ----------------------------- */ 1552 /* check scsi parity error */ 1553 if (host->jsstatus0 & TSS_PAR_ERROR) 1554 scb->hastat = HOST_DO_DU; 1555 if (inb(host->addr + TUL_XStatus) & XPEND) { /* DMA xfer pending, Send STOP */ 1556 /* tell Hardware scsi xfer has been terminated */ 1557 outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl); 1558 /* wait until DMA xfer not pending */ 1559 while (inb(host->addr + TUL_XStatus) & XPEND) 1560 cpu_relax(); 1561 } 1562 } else { 1563 /*-------- DATA OUT -----------*/ 1564 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) { 1565 if (host->active_tc->js_period & TSC_WIDE_SCSI) 1566 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1; 1567 else 1568 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F); 1569 } 1570 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */ 1571 outb(TAX_X_ABT, host->addr + TUL_XCmd); 1572 /* wait Abort DMA xfer done */ 1573 while ((inb(host->addr + TUL_Int) & XABT) == 0) 1574 cpu_relax(); 1575 } 1576 if ((cnt == 1) && (host->phase == DATA_OUT)) { 1577 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1578 if (wait_tulip(host) == -1) 1579 return -1; 1580 cnt = 0; 1581 } else { 1582 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) 1583 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1584 } 1585 } 1586 if (cnt == 0) { 1587 scb->buflen = 0; 1588 return 6; /* After Data */ 1589 } 1590 /* Update active data pointer */ 1591 xcnt = (long) scb->buflen - cnt; /* xcnt== bytes already xferred */ 1592 scb->buflen = (u32) cnt; /* cnt == bytes left to be xferred */ 1593 if (scb->flags & SCF_SG) { 1594 struct sg_entry *sgp; 1595 unsigned long i; 1596 1597 sgp = &scb->sglist[scb->sgidx]; 1598 for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) { 1599 xcnt -= (long) sgp->len; 1600 if (xcnt < 0) { /* this sgp xfer half done */ 1601 xcnt += (long) sgp->len; /* xcnt == bytes xferred in this sgp */ 1602 sgp->data += (u32) xcnt; /* new ptr to be xfer */ 1603 sgp->len -= (u32) xcnt; /* new len to be xfer */ 1604 scb->bufptr += ((u32) (i - scb->sgidx) << 3); 1605 /* new SG table ptr */ 1606 scb->sglen = (u8) (scb->sgmax - i); 1607 /* new SG table len */ 1608 scb->sgidx = (u16) i; 1609 /* for next disc and come in this loop */ 1610 return 4; /* Go to state 4 */ 1611 } 1612 /* else (xcnt >= 0 , i.e. this sgp already xferred */ 1613 } /* for */ 1614 return 6; /* Go to state 6 */ 1615 } else { 1616 scb->bufptr += (u32) xcnt; 1617 } 1618 return 4; /* Go to state 4 */ 1619 } 1620 1621 /** 1622 * initio_state_6 - SCSI state machine 1623 * @host: InitIO host we are controlling 1624 * 1625 * State after Data phase 1626 */ 1627 1628 static int initio_state_6(struct initio_host * host) 1629 { 1630 struct scsi_ctrl_blk *scb = host->active; 1631 1632 #if DEBUG_STATE 1633 printk("-s6-"); 1634 #endif 1635 for (;;) { 1636 switch (host->phase) { 1637 case STATUS_IN: /* Status phase */ 1638 if ((initio_status_msg(host)) == -1) 1639 return -1; 1640 break; 1641 1642 case MSG_IN: /* Message in phase */ 1643 scb->next_state = 6; 1644 if ((initio_msgin(host)) == -1) 1645 return -1; 1646 break; 1647 1648 case MSG_OUT: /* Message out phase */ 1649 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */ 1650 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1651 if (wait_tulip(host) == -1) 1652 return -1; 1653 break; 1654 1655 case DATA_IN: /* Data in phase */ 1656 return initio_xpad_in(host); 1657 1658 case DATA_OUT: /* Data out phase */ 1659 return initio_xpad_out(host); 1660 1661 default: 1662 return initio_bad_seq(host); 1663 } 1664 } 1665 } 1666 1667 /** 1668 * initio_state_7 - SCSI state machine 1669 * @host: InitIO host we are controlling 1670 * 1671 */ 1672 1673 int initio_state_7(struct initio_host * host) 1674 { 1675 int cnt, i; 1676 1677 #if DEBUG_STATE 1678 printk("-s7-"); 1679 #endif 1680 /* flush SCSI FIFO */ 1681 cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F; 1682 if (cnt) { 1683 for (i = 0; i < cnt; i++) 1684 inb(host->addr + TUL_SFifo); 1685 } 1686 switch (host->phase) { 1687 case DATA_IN: /* Data in phase */ 1688 case DATA_OUT: /* Data out phase */ 1689 return initio_bad_seq(host); 1690 default: 1691 return 6; /* Go to state 6 */ 1692 } 1693 } 1694 1695 /** 1696 * initio_xfer_data_in - Commence data input 1697 * @host: InitIO host in use 1698 * 1699 * Commence a block of data transfer. The transfer itself will 1700 * be managed by the controller and we will get a completion (or 1701 * failure) interrupt. 1702 */ 1703 static int initio_xfer_data_in(struct initio_host * host) 1704 { 1705 struct scsi_ctrl_blk *scb = host->active; 1706 1707 if ((scb->flags & SCF_DIR) == SCF_DOUT) 1708 return 6; /* wrong direction */ 1709 1710 outl(scb->buflen, host->addr + TUL_SCnt0); 1711 outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd); /* 7/25/95 */ 1712 1713 if (scb->flags & SCF_SG) { /* S/G xfer */ 1714 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH); 1715 outl(scb->bufptr, host->addr + TUL_XAddH); 1716 outb(TAX_SG_IN, host->addr + TUL_XCmd); 1717 } else { 1718 outl(scb->buflen, host->addr + TUL_XCntH); 1719 outl(scb->bufptr, host->addr + TUL_XAddH); 1720 outb(TAX_X_IN, host->addr + TUL_XCmd); 1721 } 1722 scb->next_state = 0x5; 1723 return 0; /* return to OS, wait xfer done , let jas_isr come in */ 1724 } 1725 1726 /** 1727 * initio_xfer_data_out - Commence data output 1728 * @host: InitIO host in use 1729 * 1730 * Commence a block of data transfer. The transfer itself will 1731 * be managed by the controller and we will get a completion (or 1732 * failure) interrupt. 1733 */ 1734 1735 static int initio_xfer_data_out(struct initio_host * host) 1736 { 1737 struct scsi_ctrl_blk *scb = host->active; 1738 1739 if ((scb->flags & SCF_DIR) == SCF_DIN) 1740 return 6; /* wrong direction */ 1741 1742 outl(scb->buflen, host->addr + TUL_SCnt0); 1743 outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd); 1744 1745 if (scb->flags & SCF_SG) { /* S/G xfer */ 1746 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH); 1747 outl(scb->bufptr, host->addr + TUL_XAddH); 1748 outb(TAX_SG_OUT, host->addr + TUL_XCmd); 1749 } else { 1750 outl(scb->buflen, host->addr + TUL_XCntH); 1751 outl(scb->bufptr, host->addr + TUL_XAddH); 1752 outb(TAX_X_OUT, host->addr + TUL_XCmd); 1753 } 1754 1755 scb->next_state = 0x5; 1756 return 0; /* return to OS, wait xfer done , let jas_isr come in */ 1757 } 1758 1759 int initio_xpad_in(struct initio_host * host) 1760 { 1761 struct scsi_ctrl_blk *scb = host->active; 1762 struct target_control *active_tc = host->active_tc; 1763 1764 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK) 1765 scb->hastat = HOST_DO_DU; /* over run */ 1766 for (;;) { 1767 if (active_tc->js_period & TSC_WIDE_SCSI) 1768 outl(2, host->addr + TUL_SCnt0); 1769 else 1770 outl(1, host->addr + TUL_SCnt0); 1771 1772 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 1773 if (wait_tulip(host) == -1) 1774 return -1; 1775 if (host->phase != DATA_IN) { 1776 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1777 return 6; 1778 } 1779 inb(host->addr + TUL_SFifo); 1780 } 1781 } 1782 1783 int initio_xpad_out(struct initio_host * host) 1784 { 1785 struct scsi_ctrl_blk *scb = host->active; 1786 struct target_control *active_tc = host->active_tc; 1787 1788 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK) 1789 scb->hastat = HOST_DO_DU; /* over run */ 1790 for (;;) { 1791 if (active_tc->js_period & TSC_WIDE_SCSI) 1792 outl(2, host->addr + TUL_SCnt0); 1793 else 1794 outl(1, host->addr + TUL_SCnt0); 1795 1796 outb(0, host->addr + TUL_SFifo); 1797 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1798 if ((wait_tulip(host)) == -1) 1799 return -1; 1800 if (host->phase != DATA_OUT) { /* Disable wide CPU to allow read 16 bits */ 1801 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); 1802 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1803 return 6; 1804 } 1805 } 1806 } 1807 1808 int initio_status_msg(struct initio_host * host) 1809 { /* status & MSG_IN */ 1810 struct scsi_ctrl_blk *scb = host->active; 1811 u8 msg; 1812 1813 outb(TSC_CMD_COMP, host->addr + TUL_SCmd); 1814 if (wait_tulip(host) == -1) 1815 return -1; 1816 1817 /* get status */ 1818 scb->tastat = inb(host->addr + TUL_SFifo); 1819 1820 if (host->phase == MSG_OUT) { 1821 if (host->jsstatus0 & TSS_PAR_ERROR) 1822 outb(MSG_PARITY, host->addr + TUL_SFifo); 1823 else 1824 outb(MSG_NOP, host->addr + TUL_SFifo); 1825 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1826 return wait_tulip(host); 1827 } 1828 if (host->phase == MSG_IN) { 1829 msg = inb(host->addr + TUL_SFifo); 1830 if (host->jsstatus0 & TSS_PAR_ERROR) { /* Parity error */ 1831 if ((initio_msgin_accept(host)) == -1) 1832 return -1; 1833 if (host->phase != MSG_OUT) 1834 return initio_bad_seq(host); 1835 outb(MSG_PARITY, host->addr + TUL_SFifo); 1836 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 1837 return wait_tulip(host); 1838 } 1839 if (msg == 0) { /* Command complete */ 1840 1841 if ((scb->tastat & 0x18) == 0x10) /* No link support */ 1842 return initio_bad_seq(host); 1843 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1844 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); 1845 return initio_wait_done_disc(host); 1846 1847 } 1848 if (msg == MSG_LINK_COMP || msg == MSG_LINK_FLAG) { 1849 if ((scb->tastat & 0x18) == 0x10) 1850 return initio_msgin_accept(host); 1851 } 1852 } 1853 return initio_bad_seq(host); 1854 } 1855 1856 1857 /* scsi bus free */ 1858 int int_initio_busfree(struct initio_host * host) 1859 { 1860 struct scsi_ctrl_blk *scb = host->active; 1861 1862 if (scb != NULL) { 1863 if (scb->status & SCB_SELECT) { /* selection timeout */ 1864 initio_unlink_pend_scb(host, scb); 1865 scb->hastat = HOST_SEL_TOUT; 1866 initio_append_done_scb(host, scb); 1867 } else { /* Unexpected bus free */ 1868 initio_unlink_busy_scb(host, scb); 1869 scb->hastat = HOST_BUS_FREE; 1870 initio_append_done_scb(host, scb); 1871 } 1872 host->active = NULL; 1873 host->active_tc = NULL; 1874 } 1875 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 1876 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 1877 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 1878 return -1; 1879 } 1880 1881 1882 /** 1883 * int_initio_scsi_rst - SCSI reset occurred 1884 * @host: Host seeing the reset 1885 * 1886 * A SCSI bus reset has occurred. Clean up any pending transfer 1887 * the hardware is doing by DMA and then abort all active and 1888 * disconnected commands. The mid layer should sort the rest out 1889 * for us 1890 */ 1891 1892 static int int_initio_scsi_rst(struct initio_host * host) 1893 { 1894 struct scsi_ctrl_blk *scb; 1895 int i; 1896 1897 /* if DMA xfer is pending, abort DMA xfer */ 1898 if (inb(host->addr + TUL_XStatus) & 0x01) { 1899 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd); 1900 /* wait Abort DMA xfer done */ 1901 while ((inb(host->addr + TUL_Int) & 0x04) == 0) 1902 cpu_relax(); 1903 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 1904 } 1905 /* Abort all active & disconnected scb */ 1906 while ((scb = initio_pop_busy_scb(host)) != NULL) { 1907 scb->hastat = HOST_BAD_PHAS; 1908 initio_append_done_scb(host, scb); 1909 } 1910 host->active = NULL; 1911 host->active_tc = NULL; 1912 1913 /* clr sync nego. done flag */ 1914 for (i = 0; i < host->max_tar; i++) 1915 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); 1916 return -1; 1917 } 1918 1919 /** 1920 * int_initio_scsi_resel - Reselection occured 1921 * @host: InitIO host adapter 1922 * 1923 * A SCSI reselection event has been signalled and the interrupt 1924 * is now being processed. Work out which command block needs attention 1925 * and continue processing that command. 1926 */ 1927 1928 int int_initio_resel(struct initio_host * host) 1929 { 1930 struct scsi_ctrl_blk *scb; 1931 struct target_control *active_tc; 1932 u8 tag, msg = 0; 1933 u8 tar, lun; 1934 1935 if ((scb = host->active) != NULL) { 1936 /* FIXME: Why check and not just clear ? */ 1937 if (scb->status & SCB_SELECT) /* if waiting for selection complete */ 1938 scb->status &= ~SCB_SELECT; 1939 host->active = NULL; 1940 } 1941 /* --------- get target id---------------------- */ 1942 tar = inb(host->addr + TUL_SBusId); 1943 /* ------ get LUN from Identify message----------- */ 1944 lun = inb(host->addr + TUL_SIdent) & 0x0F; 1945 /* 07/22/98 from 0x1F -> 0x0F */ 1946 active_tc = &host->targets[tar]; 1947 host->active_tc = active_tc; 1948 outb(active_tc->sconfig0, host->addr + TUL_SConfig); 1949 outb(active_tc->js_period, host->addr + TUL_SPeriod); 1950 1951 /* ------------- tag queueing ? ------------------- */ 1952 if (active_tc->drv_flags & TCF_DRV_EN_TAG) { 1953 if ((initio_msgin_accept(host)) == -1) 1954 return -1; 1955 if (host->phase != MSG_IN) 1956 goto no_tag; 1957 outl(1, host->addr + TUL_SCnt0); 1958 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 1959 if (wait_tulip(host) == -1) 1960 return -1; 1961 msg = inb(host->addr + TUL_SFifo); /* Read Tag Message */ 1962 1963 if (msg < MSG_STAG || msg > MSG_OTAG) /* Is simple Tag */ 1964 goto no_tag; 1965 1966 if (initio_msgin_accept(host) == -1) 1967 return -1; 1968 1969 if (host->phase != MSG_IN) 1970 goto no_tag; 1971 1972 outl(1, host->addr + TUL_SCnt0); 1973 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 1974 if (wait_tulip(host) == -1) 1975 return -1; 1976 tag = inb(host->addr + TUL_SFifo); /* Read Tag ID */ 1977 scb = host->scb + tag; 1978 if (scb->target != tar || scb->lun != lun) { 1979 return initio_msgout_abort_tag(host); 1980 } 1981 if (scb->status != SCB_BUSY) { /* 03/24/95 */ 1982 return initio_msgout_abort_tag(host); 1983 } 1984 host->active = scb; 1985 if ((initio_msgin_accept(host)) == -1) 1986 return -1; 1987 } else { /* No tag */ 1988 no_tag: 1989 if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) { 1990 return initio_msgout_abort_targ(host); 1991 } 1992 host->active = scb; 1993 if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) { 1994 if ((initio_msgin_accept(host)) == -1) 1995 return -1; 1996 } 1997 } 1998 return 0; 1999 } 2000 2001 /** 2002 * int_initio_bad_seq - out of phase 2003 * @host: InitIO host flagging event 2004 * 2005 * We have ended up out of phase somehow. Reset the host controller 2006 * and throw all our toys out of the pram. Let the midlayer clean up 2007 */ 2008 2009 static int int_initio_bad_seq(struct initio_host * host) 2010 { /* target wrong phase */ 2011 struct scsi_ctrl_blk *scb; 2012 int i; 2013 2014 initio_reset_scsi(host, 10); 2015 2016 while ((scb = initio_pop_busy_scb(host)) != NULL) { 2017 scb->hastat = HOST_BAD_PHAS; 2018 initio_append_done_scb(host, scb); 2019 } 2020 for (i = 0; i < host->max_tar; i++) 2021 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); 2022 return -1; 2023 } 2024 2025 2026 /** 2027 * initio_msgout_abort_targ - abort a tag 2028 * @host: InitIO host 2029 * 2030 * Abort when the target/lun does not match or when our SCB is not 2031 * busy. Used by untagged commands. 2032 */ 2033 2034 static int initio_msgout_abort_targ(struct initio_host * host) 2035 { 2036 2037 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2038 if (initio_msgin_accept(host) == -1) 2039 return -1; 2040 if (host->phase != MSG_OUT) 2041 return initio_bad_seq(host); 2042 2043 outb(MSG_ABORT, host->addr + TUL_SFifo); 2044 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2045 2046 return initio_wait_disc(host); 2047 } 2048 2049 /** 2050 * initio_msgout_abort_tag - abort a tag 2051 * @host: InitIO host 2052 * 2053 * Abort when the target/lun does not match or when our SCB is not 2054 * busy. Used for tagged commands. 2055 */ 2056 2057 static int initio_msgout_abort_tag(struct initio_host * host) 2058 { 2059 2060 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2061 if (initio_msgin_accept(host) == -1) 2062 return -1; 2063 if (host->phase != MSG_OUT) 2064 return initio_bad_seq(host); 2065 2066 outb(MSG_ABORT_TAG, host->addr + TUL_SFifo); 2067 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2068 2069 return initio_wait_disc(host); 2070 2071 } 2072 2073 /** 2074 * initio_msgin - Message in 2075 * @host: InitIO Host 2076 * 2077 * Process incoming message 2078 */ 2079 static int initio_msgin(struct initio_host * host) 2080 { 2081 struct target_control *active_tc; 2082 2083 for (;;) { 2084 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 2085 2086 outl(1, host->addr + TUL_SCnt0); 2087 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 2088 if (wait_tulip(host) == -1) 2089 return -1; 2090 2091 switch (inb(host->addr + TUL_SFifo)) { 2092 case MSG_DISC: /* Disconnect msg */ 2093 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); 2094 return initio_wait_disc(host); 2095 case MSG_SDP: 2096 case MSG_RESTORE: 2097 case MSG_NOP: 2098 initio_msgin_accept(host); 2099 break; 2100 case MSG_REJ: /* Clear ATN first */ 2101 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), 2102 host->addr + TUL_SSignal); 2103 active_tc = host->active_tc; 2104 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) /* do sync nego */ 2105 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), 2106 host->addr + TUL_SSignal); 2107 initio_msgin_accept(host); 2108 break; 2109 case MSG_EXTEND: /* extended msg */ 2110 initio_msgin_extend(host); 2111 break; 2112 case MSG_IGNOREWIDE: 2113 initio_msgin_accept(host); 2114 break; 2115 case MSG_COMP: 2116 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 2117 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); 2118 return initio_wait_done_disc(host); 2119 default: 2120 initio_msgout_reject(host); 2121 break; 2122 } 2123 if (host->phase != MSG_IN) 2124 return host->phase; 2125 } 2126 /* statement won't reach here */ 2127 } 2128 2129 static int initio_msgout_reject(struct initio_host * host) 2130 { 2131 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2132 2133 if (initio_msgin_accept(host) == -1) 2134 return -1; 2135 2136 if (host->phase == MSG_OUT) { 2137 outb(MSG_REJ, host->addr + TUL_SFifo); /* Msg reject */ 2138 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2139 return wait_tulip(host); 2140 } 2141 return host->phase; 2142 } 2143 2144 static int initio_msgout_ide(struct initio_host * host) 2145 { 2146 outb(MSG_IDE, host->addr + TUL_SFifo); /* Initiator Detected Error */ 2147 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2148 return wait_tulip(host); 2149 } 2150 2151 static int initio_msgin_extend(struct initio_host * host) 2152 { 2153 u8 len, idx; 2154 2155 if (initio_msgin_accept(host) != MSG_IN) 2156 return host->phase; 2157 2158 /* Get extended msg length */ 2159 outl(1, host->addr + TUL_SCnt0); 2160 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 2161 if (wait_tulip(host) == -1) 2162 return -1; 2163 2164 len = inb(host->addr + TUL_SFifo); 2165 host->msg[0] = len; 2166 for (idx = 1; len != 0; len--) { 2167 2168 if ((initio_msgin_accept(host)) != MSG_IN) 2169 return host->phase; 2170 outl(1, host->addr + TUL_SCnt0); 2171 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); 2172 if (wait_tulip(host) == -1) 2173 return -1; 2174 host->msg[idx++] = inb(host->addr + TUL_SFifo); 2175 } 2176 if (host->msg[1] == 1) { /* if it's synchronous data transfer request */ 2177 u8 r; 2178 if (host->msg[0] != 3) /* if length is not right */ 2179 return initio_msgout_reject(host); 2180 if (host->active_tc->flags & TCF_NO_SYNC_NEGO) { /* Set OFFSET=0 to do async, nego back */ 2181 host->msg[3] = 0; 2182 } else { 2183 if (initio_msgin_sync(host) == 0 && 2184 (host->active_tc->flags & TCF_SYNC_DONE)) { 2185 initio_sync_done(host); 2186 return initio_msgin_accept(host); 2187 } 2188 } 2189 2190 r = inb(host->addr + TUL_SSignal); 2191 outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN, 2192 host->addr + TUL_SSignal); 2193 if (initio_msgin_accept(host) != MSG_OUT) 2194 return host->phase; 2195 /* sync msg out */ 2196 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); 2197 2198 initio_sync_done(host); 2199 2200 outb(MSG_EXTEND, host->addr + TUL_SFifo); 2201 outb(3, host->addr + TUL_SFifo); 2202 outb(1, host->addr + TUL_SFifo); 2203 outb(host->msg[2], host->addr + TUL_SFifo); 2204 outb(host->msg[3], host->addr + TUL_SFifo); 2205 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2206 return wait_tulip(host); 2207 } 2208 if (host->msg[0] != 2 || host->msg[1] != 3) 2209 return initio_msgout_reject(host); 2210 /* if it's WIDE DATA XFER REQ */ 2211 if (host->active_tc->flags & TCF_NO_WDTR) { 2212 host->msg[2] = 0; 2213 } else { 2214 if (host->msg[2] > 2) /* > 32 bits */ 2215 return initio_msgout_reject(host); 2216 if (host->msg[2] == 2) { /* == 32 */ 2217 host->msg[2] = 1; 2218 } else { 2219 if ((host->active_tc->flags & TCF_NO_WDTR) == 0) { 2220 wdtr_done(host); 2221 if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) 2222 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2223 return initio_msgin_accept(host); 2224 } 2225 } 2226 } 2227 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); 2228 2229 if (initio_msgin_accept(host) != MSG_OUT) 2230 return host->phase; 2231 /* WDTR msg out */ 2232 outb(MSG_EXTEND, host->addr + TUL_SFifo); 2233 outb(2, host->addr + TUL_SFifo); 2234 outb(3, host->addr + TUL_SFifo); 2235 outb(host->msg[2], host->addr + TUL_SFifo); 2236 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2237 return wait_tulip(host); 2238 } 2239 2240 static int initio_msgin_sync(struct initio_host * host) 2241 { 2242 char default_period; 2243 2244 default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE]; 2245 if (host->msg[3] > MAX_OFFSET) { 2246 host->msg[3] = MAX_OFFSET; 2247 if (host->msg[2] < default_period) { 2248 host->msg[2] = default_period; 2249 return 1; 2250 } 2251 if (host->msg[2] >= 59) /* Change to async */ 2252 host->msg[3] = 0; 2253 return 1; 2254 } 2255 /* offset requests asynchronous transfers ? */ 2256 if (host->msg[3] == 0) { 2257 return 0; 2258 } 2259 if (host->msg[2] < default_period) { 2260 host->msg[2] = default_period; 2261 return 1; 2262 } 2263 if (host->msg[2] >= 59) { 2264 host->msg[3] = 0; 2265 return 1; 2266 } 2267 return 0; 2268 } 2269 2270 static int wdtr_done(struct initio_host * host) 2271 { 2272 host->active_tc->flags &= ~TCF_SYNC_DONE; 2273 host->active_tc->flags |= TCF_WDTR_DONE; 2274 2275 host->active_tc->js_period = 0; 2276 if (host->msg[2]) /* if 16 bit */ 2277 host->active_tc->js_period |= TSC_WIDE_SCSI; 2278 host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD; 2279 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig); 2280 outb(host->active_tc->js_period, host->addr + TUL_SPeriod); 2281 2282 return 1; 2283 } 2284 2285 static int initio_sync_done(struct initio_host * host) 2286 { 2287 int i; 2288 2289 host->active_tc->flags |= TCF_SYNC_DONE; 2290 2291 if (host->msg[3]) { 2292 host->active_tc->js_period |= host->msg[3]; 2293 for (i = 0; i < 8; i++) { 2294 if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */ 2295 break; 2296 } 2297 host->active_tc->js_period |= (i << 4); 2298 host->active_tc->sconfig0 |= TSC_ALT_PERIOD; 2299 } 2300 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig); 2301 outb(host->active_tc->js_period, host->addr + TUL_SPeriod); 2302 2303 return -1; 2304 } 2305 2306 2307 static int initio_post_scsi_rst(struct initio_host * host) 2308 { 2309 struct scsi_ctrl_blk *scb; 2310 struct target_control *active_tc; 2311 int i; 2312 2313 host->active = NULL; 2314 host->active_tc = NULL; 2315 host->flags = 0; 2316 2317 while ((scb = initio_pop_busy_scb(host)) != NULL) { 2318 scb->hastat = HOST_BAD_PHAS; 2319 initio_append_done_scb(host, scb); 2320 } 2321 /* clear sync done flag */ 2322 active_tc = &host->targets[0]; 2323 for (i = 0; i < host->max_tar; active_tc++, i++) { 2324 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); 2325 /* Initialize the sync. xfer register values to an asyn xfer */ 2326 active_tc->js_period = 0; 2327 active_tc->sconfig0 = host->sconf1; 2328 host->act_tags[0] = 0; /* 07/22/98 */ 2329 host->targets[i].flags &= ~TCF_BUSY; /* 07/22/98 */ 2330 } /* for */ 2331 2332 return -1; 2333 } 2334 2335 static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb) 2336 { 2337 scb->status |= SCB_SELECT; 2338 scb->next_state = 0x1; 2339 host->active = scb; 2340 host->active_tc = &host->targets[scb->target]; 2341 outb(TSC_SELATNSTOP, host->addr + TUL_SCmd); 2342 } 2343 2344 2345 static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb) 2346 { 2347 int i; 2348 2349 scb->status |= SCB_SELECT; 2350 scb->next_state = 0x2; 2351 2352 outb(scb->ident, host->addr + TUL_SFifo); 2353 for (i = 0; i < (int) scb->cdblen; i++) 2354 outb(scb->cdb[i], host->addr + TUL_SFifo); 2355 host->active_tc = &host->targets[scb->target]; 2356 host->active = scb; 2357 outb(TSC_SEL_ATN, host->addr + TUL_SCmd); 2358 } 2359 2360 static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb) 2361 { 2362 int i; 2363 2364 scb->status |= SCB_SELECT; 2365 scb->next_state = 0x2; 2366 2367 outb(scb->ident, host->addr + TUL_SFifo); 2368 outb(scb->tagmsg, host->addr + TUL_SFifo); 2369 outb(scb->tagid, host->addr + TUL_SFifo); 2370 for (i = 0; i < scb->cdblen; i++) 2371 outb(scb->cdb[i], host->addr + TUL_SFifo); 2372 host->active_tc = &host->targets[scb->target]; 2373 host->active = scb; 2374 outb(TSC_SEL_ATN3, host->addr + TUL_SCmd); 2375 } 2376 2377 /** 2378 * initio_bus_device_reset - SCSI Bus Device Reset 2379 * @host: InitIO host to reset 2380 * 2381 * Perform a device reset and abort all pending SCBs for the 2382 * victim device 2383 */ 2384 int initio_bus_device_reset(struct initio_host * host) 2385 { 2386 struct scsi_ctrl_blk *scb = host->active; 2387 struct target_control *active_tc = host->active_tc; 2388 struct scsi_ctrl_blk *tmp, *prev; 2389 u8 tar; 2390 2391 if (host->phase != MSG_OUT) 2392 return int_initio_bad_seq(host); /* Unexpected phase */ 2393 2394 initio_unlink_pend_scb(host, scb); 2395 initio_release_scb(host, scb); 2396 2397 2398 tar = scb->target; /* target */ 2399 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY); 2400 /* clr sync. nego & WDTR flags 07/22/98 */ 2401 2402 /* abort all SCB with same target */ 2403 prev = tmp = host->first_busy; /* Check Busy queue */ 2404 while (tmp != NULL) { 2405 if (tmp->target == tar) { 2406 /* unlink it */ 2407 if (tmp == host->first_busy) { 2408 if ((host->first_busy = tmp->next) == NULL) 2409 host->last_busy = NULL; 2410 } else { 2411 prev->next = tmp->next; 2412 if (tmp == host->last_busy) 2413 host->last_busy = prev; 2414 } 2415 tmp->hastat = HOST_ABORTED; 2416 initio_append_done_scb(host, tmp); 2417 } 2418 /* Previous haven't change */ 2419 else { 2420 prev = tmp; 2421 } 2422 tmp = tmp->next; 2423 } 2424 outb(MSG_DEVRST, host->addr + TUL_SFifo); 2425 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); 2426 return initio_wait_disc(host); 2427 2428 } 2429 2430 static int initio_msgin_accept(struct initio_host * host) 2431 { 2432 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); 2433 return wait_tulip(host); 2434 } 2435 2436 static int wait_tulip(struct initio_host * host) 2437 { 2438 2439 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) 2440 & TSS_INT_PENDING)) 2441 cpu_relax(); 2442 2443 host->jsint = inb(host->addr + TUL_SInt); 2444 host->phase = host->jsstatus0 & TSS_PH_MASK; 2445 host->jsstatus1 = inb(host->addr + TUL_SStatus1); 2446 2447 if (host->jsint & TSS_RESEL_INT) /* if SCSI bus reset detected */ 2448 return int_initio_resel(host); 2449 if (host->jsint & TSS_SEL_TIMEOUT) /* if selected/reselected timeout interrupt */ 2450 return int_initio_busfree(host); 2451 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ 2452 return int_initio_scsi_rst(host); 2453 2454 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ 2455 if (host->flags & HCF_EXPECT_DONE_DISC) { 2456 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 2457 initio_unlink_busy_scb(host, host->active); 2458 host->active->hastat = 0; 2459 initio_append_done_scb(host, host->active); 2460 host->active = NULL; 2461 host->active_tc = NULL; 2462 host->flags &= ~HCF_EXPECT_DONE_DISC; 2463 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 2464 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 2465 return -1; 2466 } 2467 if (host->flags & HCF_EXPECT_DISC) { 2468 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 2469 host->active = NULL; 2470 host->active_tc = NULL; 2471 host->flags &= ~HCF_EXPECT_DISC; 2472 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 2473 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 2474 return -1; 2475 } 2476 return int_initio_busfree(host); 2477 } 2478 /* The old code really does the below. Can probably be removed */ 2479 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) 2480 return host->phase; 2481 return host->phase; 2482 } 2483 2484 static int initio_wait_disc(struct initio_host * host) 2485 { 2486 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING)) 2487 cpu_relax(); 2488 2489 host->jsint = inb(host->addr + TUL_SInt); 2490 2491 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ 2492 return int_initio_scsi_rst(host); 2493 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ 2494 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 2495 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 2496 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 2497 host->active = NULL; 2498 return -1; 2499 } 2500 return initio_bad_seq(host); 2501 } 2502 2503 static int initio_wait_done_disc(struct initio_host * host) 2504 { 2505 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) 2506 & TSS_INT_PENDING)) 2507 cpu_relax(); 2508 2509 host->jsint = inb(host->addr + TUL_SInt); 2510 2511 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ 2512 return int_initio_scsi_rst(host); 2513 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ 2514 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ 2515 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); 2516 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ 2517 initio_unlink_busy_scb(host, host->active); 2518 2519 initio_append_done_scb(host, host->active); 2520 host->active = NULL; 2521 return -1; 2522 } 2523 return initio_bad_seq(host); 2524 } 2525 2526 /** 2527 * i91u_intr - IRQ handler 2528 * @irqno: IRQ number 2529 * @dev_id: IRQ identifier 2530 * 2531 * Take the relevant locks and then invoke the actual isr processing 2532 * code under the lock. 2533 */ 2534 2535 static irqreturn_t i91u_intr(int irqno, void *dev_id) 2536 { 2537 struct Scsi_Host *dev = dev_id; 2538 unsigned long flags; 2539 int r; 2540 2541 spin_lock_irqsave(dev->host_lock, flags); 2542 r = initio_isr((struct initio_host *)dev->hostdata); 2543 spin_unlock_irqrestore(dev->host_lock, flags); 2544 if (r) 2545 return IRQ_HANDLED; 2546 else 2547 return IRQ_NONE; 2548 } 2549 2550 2551 /** 2552 * initio_build_scb - Build the mappings and SCB 2553 * @host: InitIO host taking the command 2554 * @cblk: Firmware command block 2555 * @cmnd: SCSI midlayer command block 2556 * 2557 * Translate the abstract SCSI command into a firmware command block 2558 * suitable for feeding to the InitIO host controller. This also requires 2559 * we build the scatter gather lists and ensure they are mapped properly. 2560 */ 2561 2562 static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd) 2563 { /* Create corresponding SCB */ 2564 struct scatterlist *sglist; 2565 struct sg_entry *sg; /* Pointer to SG list */ 2566 int i, nseg; 2567 long total_len; 2568 dma_addr_t dma_addr; 2569 2570 /* Fill in the command headers */ 2571 cblk->post = i91uSCBPost; /* i91u's callback routine */ 2572 cblk->srb = cmnd; 2573 cblk->opcode = ExecSCSI; 2574 cblk->flags = SCF_POST; /* After SCSI done, call post routine */ 2575 cblk->target = cmnd->device->id; 2576 cblk->lun = cmnd->device->lun; 2577 cblk->ident = cmnd->device->lun | DISC_ALLOW; 2578 2579 cblk->flags |= SCF_SENSE; /* Turn on auto request sense */ 2580 2581 /* Map the sense buffer into bus memory */ 2582 dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer, 2583 SENSE_SIZE, DMA_FROM_DEVICE); 2584 cblk->senseptr = (u32)dma_addr; 2585 cblk->senselen = SENSE_SIZE; 2586 cmnd->SCp.ptr = (char *)(unsigned long)dma_addr; 2587 cblk->cdblen = cmnd->cmd_len; 2588 2589 /* Clear the returned status */ 2590 cblk->hastat = 0; 2591 cblk->tastat = 0; 2592 /* Command the command */ 2593 memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len); 2594 2595 /* Set up tags */ 2596 if (cmnd->device->tagged_supported) { /* Tag Support */ 2597 cblk->tagmsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */ 2598 } else { 2599 cblk->tagmsg = 0; /* No tag support */ 2600 } 2601 2602 /* todo handle map_sg error */ 2603 nseg = scsi_dma_map(cmnd); 2604 BUG_ON(nseg < 0); 2605 if (nseg) { 2606 dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0], 2607 sizeof(struct sg_entry) * TOTAL_SG_ENTRY, 2608 DMA_BIDIRECTIONAL); 2609 cblk->bufptr = (u32)dma_addr; 2610 cmnd->SCp.dma_handle = dma_addr; 2611 2612 cblk->sglen = nseg; 2613 2614 cblk->flags |= SCF_SG; /* Turn on SG list flag */ 2615 total_len = 0; 2616 sg = &cblk->sglist[0]; 2617 scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) { 2618 sg->data = cpu_to_le32((u32)sg_dma_address(sglist)); 2619 sg->len = cpu_to_le32((u32)sg_dma_len(sglist)); 2620 total_len += sg_dma_len(sglist); 2621 ++sg; 2622 } 2623 2624 cblk->buflen = (scsi_bufflen(cmnd) > total_len) ? 2625 total_len : scsi_bufflen(cmnd); 2626 } else { /* No data transfer required */ 2627 cblk->buflen = 0; 2628 cblk->sglen = 0; 2629 } 2630 } 2631 2632 /** 2633 * i91u_queuecommand - Queue a new command if possible 2634 * @cmd: SCSI command block from the mid layer 2635 * @done: Completion handler 2636 * 2637 * Attempts to queue a new command with the host adapter. Will return 2638 * zero if successful or indicate a host busy condition if not (which 2639 * will cause the mid layer to call us again later with the command) 2640 */ 2641 2642 static int i91u_queuecommand_lck(struct scsi_cmnd *cmd, 2643 void (*done)(struct scsi_cmnd *)) 2644 { 2645 struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata; 2646 struct scsi_ctrl_blk *cmnd; 2647 2648 cmd->scsi_done = done; 2649 2650 cmnd = initio_alloc_scb(host); 2651 if (!cmnd) 2652 return SCSI_MLQUEUE_HOST_BUSY; 2653 2654 initio_build_scb(host, cmnd, cmd); 2655 initio_exec_scb(host, cmnd); 2656 return 0; 2657 } 2658 2659 static DEF_SCSI_QCMD(i91u_queuecommand) 2660 2661 /** 2662 * i91u_bus_reset - reset the SCSI bus 2663 * @cmnd: Command block we want to trigger the reset for 2664 * 2665 * Initiate a SCSI bus reset sequence 2666 */ 2667 2668 static int i91u_bus_reset(struct scsi_cmnd * cmnd) 2669 { 2670 struct initio_host *host; 2671 2672 host = (struct initio_host *) cmnd->device->host->hostdata; 2673 2674 spin_lock_irq(cmnd->device->host->host_lock); 2675 initio_reset_scsi(host, 0); 2676 spin_unlock_irq(cmnd->device->host->host_lock); 2677 2678 return SUCCESS; 2679 } 2680 2681 /** 2682 * i91u_biospararm - return the "logical geometry 2683 * @sdev: SCSI device 2684 * @dev; Matching block device 2685 * @capacity: Sector size of drive 2686 * @info_array: Return space for BIOS geometry 2687 * 2688 * Map the device geometry in a manner compatible with the host 2689 * controller BIOS behaviour. 2690 * 2691 * FIXME: limited to 2^32 sector devices. 2692 */ 2693 2694 static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev, 2695 sector_t capacity, int *info_array) 2696 { 2697 struct initio_host *host; /* Point to Host adapter control block */ 2698 struct target_control *tc; 2699 2700 host = (struct initio_host *) sdev->host->hostdata; 2701 tc = &host->targets[sdev->id]; 2702 2703 if (tc->heads) { 2704 info_array[0] = tc->heads; 2705 info_array[1] = tc->sectors; 2706 info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors; 2707 } else { 2708 if (tc->drv_flags & TCF_DRV_255_63) { 2709 info_array[0] = 255; 2710 info_array[1] = 63; 2711 info_array[2] = (unsigned long)capacity / 255 / 63; 2712 } else { 2713 info_array[0] = 64; 2714 info_array[1] = 32; 2715 info_array[2] = (unsigned long)capacity >> 11; 2716 } 2717 } 2718 2719 #if defined(DEBUG_BIOSPARAM) 2720 if (i91u_debug & debug_biosparam) { 2721 printk("bios geometry: head=%d, sec=%d, cyl=%d\n", 2722 info_array[0], info_array[1], info_array[2]); 2723 printk("WARNING: check, if the bios geometry is correct.\n"); 2724 } 2725 #endif 2726 2727 return 0; 2728 } 2729 2730 /** 2731 * i91u_unmap_scb - Unmap a command 2732 * @pci_dev: PCI device the command is for 2733 * @cmnd: The command itself 2734 * 2735 * Unmap any PCI mapping/IOMMU resources allocated when the command 2736 * was mapped originally as part of initio_build_scb 2737 */ 2738 2739 static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd) 2740 { 2741 /* auto sense buffer */ 2742 if (cmnd->SCp.ptr) { 2743 dma_unmap_single(&pci_dev->dev, 2744 (dma_addr_t)((unsigned long)cmnd->SCp.ptr), 2745 SENSE_SIZE, DMA_FROM_DEVICE); 2746 cmnd->SCp.ptr = NULL; 2747 } 2748 2749 /* request buffer */ 2750 if (scsi_sg_count(cmnd)) { 2751 dma_unmap_single(&pci_dev->dev, cmnd->SCp.dma_handle, 2752 sizeof(struct sg_entry) * TOTAL_SG_ENTRY, 2753 DMA_BIDIRECTIONAL); 2754 2755 scsi_dma_unmap(cmnd); 2756 } 2757 } 2758 2759 /** 2760 * i91uSCBPost - SCSI callback 2761 * @host: Pointer to host adapter control block. 2762 * @cmnd: Pointer to SCSI control block. 2763 * 2764 * This is callback routine be called when tulip finish one 2765 * SCSI command. 2766 */ 2767 2768 static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem) 2769 { 2770 struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */ 2771 struct initio_host *host; 2772 struct scsi_ctrl_blk *cblk; 2773 2774 host = (struct initio_host *) host_mem; 2775 cblk = (struct scsi_ctrl_blk *) cblk_mem; 2776 if ((cmnd = cblk->srb) == NULL) { 2777 printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n"); 2778 WARN_ON(1); 2779 initio_release_scb(host, cblk); /* Release SCB for current channel */ 2780 return; 2781 } 2782 2783 /* 2784 * Remap the firmware error status into a mid layer one 2785 */ 2786 switch (cblk->hastat) { 2787 case 0x0: 2788 case 0xa: /* Linked command complete without error and linked normally */ 2789 case 0xb: /* Linked command complete without error interrupt generated */ 2790 cblk->hastat = 0; 2791 break; 2792 2793 case 0x11: /* Selection time out-The initiator selection or target 2794 reselection was not complete within the SCSI Time out period */ 2795 cblk->hastat = DID_TIME_OUT; 2796 break; 2797 2798 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus 2799 phase sequence was requested by the target. The host adapter 2800 will generate a SCSI Reset Condition, notifying the host with 2801 a SCRD interrupt */ 2802 cblk->hastat = DID_RESET; 2803 break; 2804 2805 case 0x1a: /* SCB Aborted. 07/21/98 */ 2806 cblk->hastat = DID_ABORT; 2807 break; 2808 2809 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data 2810 than was allocated by the Data Length field or the sum of the 2811 Scatter / Gather Data Length fields. */ 2812 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ 2813 case 0x16: /* Invalid SCB Operation Code. */ 2814 2815 default: 2816 printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat); 2817 cblk->hastat = DID_ERROR; /* Couldn't find any better */ 2818 break; 2819 } 2820 2821 cmnd->result = cblk->tastat | (cblk->hastat << 16); 2822 i91u_unmap_scb(host->pci_dev, cmnd); 2823 cmnd->scsi_done(cmnd); /* Notify system DONE */ 2824 initio_release_scb(host, cblk); /* Release SCB for current channel */ 2825 } 2826 2827 static struct scsi_host_template initio_template = { 2828 .proc_name = "INI9100U", 2829 .name = "Initio INI-9X00U/UW SCSI device driver", 2830 .queuecommand = i91u_queuecommand, 2831 .eh_bus_reset_handler = i91u_bus_reset, 2832 .bios_param = i91u_biosparam, 2833 .can_queue = MAX_TARGETS * i91u_MAXQUEUE, 2834 .this_id = 1, 2835 .sg_tablesize = SG_ALL, 2836 .cmd_per_lun = 1, 2837 .use_clustering = ENABLE_CLUSTERING, 2838 }; 2839 2840 static int initio_probe_one(struct pci_dev *pdev, 2841 const struct pci_device_id *id) 2842 { 2843 struct Scsi_Host *shost; 2844 struct initio_host *host; 2845 u32 reg; 2846 u16 bios_seg; 2847 struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */; 2848 int num_scb, i, error; 2849 2850 error = pci_enable_device(pdev); 2851 if (error) 2852 return error; 2853 2854 pci_read_config_dword(pdev, 0x44, (u32 *) & reg); 2855 bios_seg = (u16) (reg & 0xFF); 2856 if (((reg & 0xFF00) >> 8) == 0xFF) 2857 reg = 0; 2858 bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8)); 2859 2860 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { 2861 printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n"); 2862 error = -ENODEV; 2863 goto out_disable_device; 2864 } 2865 shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host)); 2866 if (!shost) { 2867 printk(KERN_WARNING "initio: Could not allocate host structure.\n"); 2868 error = -ENOMEM; 2869 goto out_disable_device; 2870 } 2871 host = (struct initio_host *)shost->hostdata; 2872 memset(host, 0, sizeof(struct initio_host)); 2873 host->addr = pci_resource_start(pdev, 0); 2874 host->bios_addr = bios_seg; 2875 2876 if (!request_region(host->addr, 256, "i91u")) { 2877 printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr); 2878 error = -ENODEV; 2879 goto out_host_put; 2880 } 2881 2882 if (initio_tag_enable) /* 1.01i */ 2883 num_scb = MAX_TARGETS * i91u_MAXQUEUE; 2884 else 2885 num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */ 2886 2887 for (; num_scb >= MAX_TARGETS + 3; num_scb--) { 2888 i = num_scb * sizeof(struct scsi_ctrl_blk); 2889 if ((scb = kzalloc(i, GFP_DMA)) != NULL) 2890 break; 2891 } 2892 2893 if (!scb) { 2894 printk(KERN_WARNING "initio: Cannot allocate SCB array.\n"); 2895 error = -ENOMEM; 2896 goto out_release_region; 2897 } 2898 2899 host->pci_dev = pdev; 2900 2901 host->semaph = 1; 2902 spin_lock_init(&host->semaph_lock); 2903 host->num_scbs = num_scb; 2904 host->scb = scb; 2905 host->next_pending = scb; 2906 host->next_avail = scb; 2907 for (i = 0, tmp = scb; i < num_scb; i++, tmp++) { 2908 tmp->tagid = i; 2909 if (i != 0) 2910 prev->next = tmp; 2911 prev = tmp; 2912 } 2913 prev->next = NULL; 2914 host->scb_end = tmp; 2915 host->first_avail = scb; 2916 host->last_avail = prev; 2917 spin_lock_init(&host->avail_lock); 2918 2919 initio_init(host, phys_to_virt(((u32)bios_seg << 4))); 2920 2921 host->jsstatus0 = 0; 2922 2923 shost->io_port = host->addr; 2924 shost->n_io_port = 0xff; 2925 shost->can_queue = num_scb; /* 03/05/98 */ 2926 shost->unique_id = host->addr; 2927 shost->max_id = host->max_tar; 2928 shost->max_lun = 32; /* 10/21/97 */ 2929 shost->irq = pdev->irq; 2930 shost->this_id = host->scsi_id; /* Assign HCS index */ 2931 shost->base = host->addr; 2932 shost->sg_tablesize = TOTAL_SG_ENTRY; 2933 2934 error = request_irq(pdev->irq, i91u_intr, IRQF_DISABLED|IRQF_SHARED, "i91u", shost); 2935 if (error < 0) { 2936 printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq); 2937 goto out_free_scbs; 2938 } 2939 2940 pci_set_drvdata(pdev, shost); 2941 2942 error = scsi_add_host(shost, &pdev->dev); 2943 if (error) 2944 goto out_free_irq; 2945 scsi_scan_host(shost); 2946 return 0; 2947 out_free_irq: 2948 free_irq(pdev->irq, shost); 2949 out_free_scbs: 2950 kfree(host->scb); 2951 out_release_region: 2952 release_region(host->addr, 256); 2953 out_host_put: 2954 scsi_host_put(shost); 2955 out_disable_device: 2956 pci_disable_device(pdev); 2957 return error; 2958 } 2959 2960 /** 2961 * initio_remove_one - control shutdown 2962 * @pdev: PCI device being released 2963 * 2964 * Release the resources assigned to this adapter after it has 2965 * finished being used. 2966 */ 2967 2968 static void initio_remove_one(struct pci_dev *pdev) 2969 { 2970 struct Scsi_Host *host = pci_get_drvdata(pdev); 2971 struct initio_host *s = (struct initio_host *)host->hostdata; 2972 scsi_remove_host(host); 2973 free_irq(pdev->irq, host); 2974 release_region(s->addr, 256); 2975 scsi_host_put(host); 2976 pci_disable_device(pdev); 2977 } 2978 2979 MODULE_LICENSE("GPL"); 2980 2981 static struct pci_device_id initio_pci_tbl[] = { 2982 {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2983 {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2984 {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2985 {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2986 {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 2987 {0,} 2988 }; 2989 MODULE_DEVICE_TABLE(pci, initio_pci_tbl); 2990 2991 static struct pci_driver initio_pci_driver = { 2992 .name = "initio", 2993 .id_table = initio_pci_tbl, 2994 .probe = initio_probe_one, 2995 .remove = __devexit_p(initio_remove_one), 2996 }; 2997 2998 static int __init initio_init_driver(void) 2999 { 3000 return pci_register_driver(&initio_pci_driver); 3001 } 3002 3003 static void __exit initio_exit_driver(void) 3004 { 3005 pci_unregister_driver(&initio_pci_driver); 3006 } 3007 3008 MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver"); 3009 MODULE_AUTHOR("Initio Corporation"); 3010 MODULE_LICENSE("GPL"); 3011 3012 module_init(initio_init_driver); 3013 module_exit(initio_exit_driver); 3014