1 /* imm.c -- low level driver for the IOMEGA MatchMaker 2 * parallel port SCSI host adapter. 3 * 4 * (The IMM is the embedded controller in the ZIP Plus drive.) 5 * 6 * My unoffical company acronym list is 21 pages long: 7 * FLA: Four letter acronym with built in facility for 8 * future expansion to five letters. 9 */ 10 11 #include <linux/init.h> 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/blkdev.h> 15 #include <linux/parport.h> 16 #include <linux/workqueue.h> 17 #include <linux/delay.h> 18 #include <linux/slab.h> 19 #include <asm/io.h> 20 21 #include <scsi/scsi.h> 22 #include <scsi/scsi_cmnd.h> 23 #include <scsi/scsi_device.h> 24 #include <scsi/scsi_host.h> 25 26 /* The following #define is to avoid a clash with hosts.c */ 27 #define IMM_PROBE_SPP 0x0001 28 #define IMM_PROBE_PS2 0x0002 29 #define IMM_PROBE_ECR 0x0010 30 #define IMM_PROBE_EPP17 0x0100 31 #define IMM_PROBE_EPP19 0x0200 32 33 34 typedef struct { 35 struct pardevice *dev; /* Parport device entry */ 36 int base; /* Actual port address */ 37 int base_hi; /* Hi Base address for ECP-ISA chipset */ 38 int mode; /* Transfer mode */ 39 struct scsi_cmnd *cur_cmd; /* Current queued command */ 40 struct delayed_work imm_tq; /* Polling interrupt stuff */ 41 unsigned long jstart; /* Jiffies at start */ 42 unsigned failed:1; /* Failure flag */ 43 unsigned dp:1; /* Data phase present */ 44 unsigned rd:1; /* Read data in data phase */ 45 unsigned wanted:1; /* Parport sharing busy flag */ 46 wait_queue_head_t *waiting; 47 struct Scsi_Host *host; 48 struct list_head list; 49 } imm_struct; 50 51 static void imm_reset_pulse(unsigned int base); 52 static int device_check(imm_struct *dev); 53 54 #include "imm.h" 55 56 static inline imm_struct *imm_dev(struct Scsi_Host *host) 57 { 58 return *(imm_struct **)&host->hostdata; 59 } 60 61 static DEFINE_SPINLOCK(arbitration_lock); 62 63 static void got_it(imm_struct *dev) 64 { 65 dev->base = dev->dev->port->base; 66 if (dev->cur_cmd) 67 dev->cur_cmd->SCp.phase = 1; 68 else 69 wake_up(dev->waiting); 70 } 71 72 static void imm_wakeup(void *ref) 73 { 74 imm_struct *dev = (imm_struct *) ref; 75 unsigned long flags; 76 77 spin_lock_irqsave(&arbitration_lock, flags); 78 if (dev->wanted) { 79 parport_claim(dev->dev); 80 got_it(dev); 81 dev->wanted = 0; 82 } 83 spin_unlock_irqrestore(&arbitration_lock, flags); 84 } 85 86 static int imm_pb_claim(imm_struct *dev) 87 { 88 unsigned long flags; 89 int res = 1; 90 spin_lock_irqsave(&arbitration_lock, flags); 91 if (parport_claim(dev->dev) == 0) { 92 got_it(dev); 93 res = 0; 94 } 95 dev->wanted = res; 96 spin_unlock_irqrestore(&arbitration_lock, flags); 97 return res; 98 } 99 100 static void imm_pb_dismiss(imm_struct *dev) 101 { 102 unsigned long flags; 103 int wanted; 104 spin_lock_irqsave(&arbitration_lock, flags); 105 wanted = dev->wanted; 106 dev->wanted = 0; 107 spin_unlock_irqrestore(&arbitration_lock, flags); 108 if (!wanted) 109 parport_release(dev->dev); 110 } 111 112 static inline void imm_pb_release(imm_struct *dev) 113 { 114 parport_release(dev->dev); 115 } 116 117 /* This is to give the imm driver a way to modify the timings (and other 118 * parameters) by writing to the /proc/scsi/imm/0 file. 119 * Very simple method really... (Too simple, no error checking :( ) 120 * Reason: Kernel hackers HATE having to unload and reload modules for 121 * testing... 122 * Also gives a method to use a script to obtain optimum timings (TODO) 123 */ 124 static inline int imm_proc_write(imm_struct *dev, char *buffer, int length) 125 { 126 unsigned long x; 127 128 if ((length > 5) && (strncmp(buffer, "mode=", 5) == 0)) { 129 x = simple_strtoul(buffer + 5, NULL, 0); 130 dev->mode = x; 131 return length; 132 } 133 printk("imm /proc: invalid variable\n"); 134 return (-EINVAL); 135 } 136 137 static int imm_proc_info(struct Scsi_Host *host, char *buffer, char **start, 138 off_t offset, int length, int inout) 139 { 140 imm_struct *dev = imm_dev(host); 141 int len = 0; 142 143 if (inout) 144 return imm_proc_write(dev, buffer, length); 145 146 len += sprintf(buffer + len, "Version : %s\n", IMM_VERSION); 147 len += 148 sprintf(buffer + len, "Parport : %s\n", 149 dev->dev->port->name); 150 len += 151 sprintf(buffer + len, "Mode : %s\n", 152 IMM_MODE_STRING[dev->mode]); 153 154 /* Request for beyond end of buffer */ 155 if (offset > len) 156 return 0; 157 158 *start = buffer + offset; 159 len -= offset; 160 if (len > length) 161 len = length; 162 return len; 163 } 164 165 #if IMM_DEBUG > 0 166 #define imm_fail(x,y) printk("imm: imm_fail(%i) from %s at line %d\n",\ 167 y, __func__, __LINE__); imm_fail_func(x,y); 168 static inline void 169 imm_fail_func(imm_struct *dev, int error_code) 170 #else 171 static inline void 172 imm_fail(imm_struct *dev, int error_code) 173 #endif 174 { 175 /* If we fail a device then we trash status / message bytes */ 176 if (dev->cur_cmd) { 177 dev->cur_cmd->result = error_code << 16; 178 dev->failed = 1; 179 } 180 } 181 182 /* 183 * Wait for the high bit to be set. 184 * 185 * In principle, this could be tied to an interrupt, but the adapter 186 * doesn't appear to be designed to support interrupts. We spin on 187 * the 0x80 ready bit. 188 */ 189 static unsigned char imm_wait(imm_struct *dev) 190 { 191 int k; 192 unsigned short ppb = dev->base; 193 unsigned char r; 194 195 w_ctr(ppb, 0x0c); 196 197 k = IMM_SPIN_TMO; 198 do { 199 r = r_str(ppb); 200 k--; 201 udelay(1); 202 } 203 while (!(r & 0x80) && (k)); 204 205 /* 206 * STR register (LPT base+1) to SCSI mapping: 207 * 208 * STR imm imm 209 * =================================== 210 * 0x80 S_REQ S_REQ 211 * 0x40 !S_BSY (????) 212 * 0x20 !S_CD !S_CD 213 * 0x10 !S_IO !S_IO 214 * 0x08 (????) !S_BSY 215 * 216 * imm imm meaning 217 * ================================== 218 * 0xf0 0xb8 Bit mask 219 * 0xc0 0x88 ZIP wants more data 220 * 0xd0 0x98 ZIP wants to send more data 221 * 0xe0 0xa8 ZIP is expecting SCSI command data 222 * 0xf0 0xb8 end of transfer, ZIP is sending status 223 */ 224 w_ctr(ppb, 0x04); 225 if (k) 226 return (r & 0xb8); 227 228 /* Counter expired - Time out occurred */ 229 imm_fail(dev, DID_TIME_OUT); 230 printk("imm timeout in imm_wait\n"); 231 return 0; /* command timed out */ 232 } 233 234 static int imm_negotiate(imm_struct * tmp) 235 { 236 /* 237 * The following is supposedly the IEEE 1284-1994 negotiate 238 * sequence. I have yet to obtain a copy of the above standard 239 * so this is a bit of a guess... 240 * 241 * A fair chunk of this is based on the Linux parport implementation 242 * of IEEE 1284. 243 * 244 * Return 0 if data available 245 * 1 if no data available 246 */ 247 248 unsigned short base = tmp->base; 249 unsigned char a, mode; 250 251 switch (tmp->mode) { 252 case IMM_NIBBLE: 253 mode = 0x00; 254 break; 255 case IMM_PS2: 256 mode = 0x01; 257 break; 258 default: 259 return 0; 260 } 261 262 w_ctr(base, 0x04); 263 udelay(5); 264 w_dtr(base, mode); 265 udelay(100); 266 w_ctr(base, 0x06); 267 udelay(5); 268 a = (r_str(base) & 0x20) ? 0 : 1; 269 udelay(5); 270 w_ctr(base, 0x07); 271 udelay(5); 272 w_ctr(base, 0x06); 273 274 if (a) { 275 printk 276 ("IMM: IEEE1284 negotiate indicates no data available.\n"); 277 imm_fail(tmp, DID_ERROR); 278 } 279 return a; 280 } 281 282 /* 283 * Clear EPP timeout bit. 284 */ 285 static inline void epp_reset(unsigned short ppb) 286 { 287 int i; 288 289 i = r_str(ppb); 290 w_str(ppb, i); 291 w_str(ppb, i & 0xfe); 292 } 293 294 /* 295 * Wait for empty ECP fifo (if we are in ECP fifo mode only) 296 */ 297 static inline void ecp_sync(imm_struct *dev) 298 { 299 int i, ppb_hi = dev->base_hi; 300 301 if (ppb_hi == 0) 302 return; 303 304 if ((r_ecr(ppb_hi) & 0xe0) == 0x60) { /* mode 011 == ECP fifo mode */ 305 for (i = 0; i < 100; i++) { 306 if (r_ecr(ppb_hi) & 0x01) 307 return; 308 udelay(5); 309 } 310 printk("imm: ECP sync failed as data still present in FIFO.\n"); 311 } 312 } 313 314 static int imm_byte_out(unsigned short base, const char *buffer, int len) 315 { 316 int i; 317 318 w_ctr(base, 0x4); /* apparently a sane mode */ 319 for (i = len >> 1; i; i--) { 320 w_dtr(base, *buffer++); 321 w_ctr(base, 0x5); /* Drop STROBE low */ 322 w_dtr(base, *buffer++); 323 w_ctr(base, 0x0); /* STROBE high + INIT low */ 324 } 325 w_ctr(base, 0x4); /* apparently a sane mode */ 326 return 1; /* All went well - we hope! */ 327 } 328 329 static int imm_nibble_in(unsigned short base, char *buffer, int len) 330 { 331 unsigned char l; 332 int i; 333 334 /* 335 * The following is based on documented timing signals 336 */ 337 w_ctr(base, 0x4); 338 for (i = len; i; i--) { 339 w_ctr(base, 0x6); 340 l = (r_str(base) & 0xf0) >> 4; 341 w_ctr(base, 0x5); 342 *buffer++ = (r_str(base) & 0xf0) | l; 343 w_ctr(base, 0x4); 344 } 345 return 1; /* All went well - we hope! */ 346 } 347 348 static int imm_byte_in(unsigned short base, char *buffer, int len) 349 { 350 int i; 351 352 /* 353 * The following is based on documented timing signals 354 */ 355 w_ctr(base, 0x4); 356 for (i = len; i; i--) { 357 w_ctr(base, 0x26); 358 *buffer++ = r_dtr(base); 359 w_ctr(base, 0x25); 360 } 361 return 1; /* All went well - we hope! */ 362 } 363 364 static int imm_out(imm_struct *dev, char *buffer, int len) 365 { 366 unsigned short ppb = dev->base; 367 int r = imm_wait(dev); 368 369 /* 370 * Make sure that: 371 * a) the SCSI bus is BUSY (device still listening) 372 * b) the device is listening 373 */ 374 if ((r & 0x18) != 0x08) { 375 imm_fail(dev, DID_ERROR); 376 printk("IMM: returned SCSI status %2x\n", r); 377 return 0; 378 } 379 switch (dev->mode) { 380 case IMM_EPP_32: 381 case IMM_EPP_16: 382 case IMM_EPP_8: 383 epp_reset(ppb); 384 w_ctr(ppb, 0x4); 385 #ifdef CONFIG_SCSI_IZIP_EPP16 386 if (!(((long) buffer | len) & 0x01)) 387 outsw(ppb + 4, buffer, len >> 1); 388 #else 389 if (!(((long) buffer | len) & 0x03)) 390 outsl(ppb + 4, buffer, len >> 2); 391 #endif 392 else 393 outsb(ppb + 4, buffer, len); 394 w_ctr(ppb, 0xc); 395 r = !(r_str(ppb) & 0x01); 396 w_ctr(ppb, 0xc); 397 ecp_sync(dev); 398 break; 399 400 case IMM_NIBBLE: 401 case IMM_PS2: 402 /* 8 bit output, with a loop */ 403 r = imm_byte_out(ppb, buffer, len); 404 break; 405 406 default: 407 printk("IMM: bug in imm_out()\n"); 408 r = 0; 409 } 410 return r; 411 } 412 413 static int imm_in(imm_struct *dev, char *buffer, int len) 414 { 415 unsigned short ppb = dev->base; 416 int r = imm_wait(dev); 417 418 /* 419 * Make sure that: 420 * a) the SCSI bus is BUSY (device still listening) 421 * b) the device is sending data 422 */ 423 if ((r & 0x18) != 0x18) { 424 imm_fail(dev, DID_ERROR); 425 return 0; 426 } 427 switch (dev->mode) { 428 case IMM_NIBBLE: 429 /* 4 bit input, with a loop */ 430 r = imm_nibble_in(ppb, buffer, len); 431 w_ctr(ppb, 0xc); 432 break; 433 434 case IMM_PS2: 435 /* 8 bit input, with a loop */ 436 r = imm_byte_in(ppb, buffer, len); 437 w_ctr(ppb, 0xc); 438 break; 439 440 case IMM_EPP_32: 441 case IMM_EPP_16: 442 case IMM_EPP_8: 443 epp_reset(ppb); 444 w_ctr(ppb, 0x24); 445 #ifdef CONFIG_SCSI_IZIP_EPP16 446 if (!(((long) buffer | len) & 0x01)) 447 insw(ppb + 4, buffer, len >> 1); 448 #else 449 if (!(((long) buffer | len) & 0x03)) 450 insl(ppb + 4, buffer, len >> 2); 451 #endif 452 else 453 insb(ppb + 4, buffer, len); 454 w_ctr(ppb, 0x2c); 455 r = !(r_str(ppb) & 0x01); 456 w_ctr(ppb, 0x2c); 457 ecp_sync(dev); 458 break; 459 460 default: 461 printk("IMM: bug in imm_ins()\n"); 462 r = 0; 463 break; 464 } 465 return r; 466 } 467 468 static int imm_cpp(unsigned short ppb, unsigned char b) 469 { 470 /* 471 * Comments on udelay values refer to the 472 * Command Packet Protocol (CPP) timing diagram. 473 */ 474 475 unsigned char s1, s2, s3; 476 w_ctr(ppb, 0x0c); 477 udelay(2); /* 1 usec - infinite */ 478 w_dtr(ppb, 0xaa); 479 udelay(10); /* 7 usec - infinite */ 480 w_dtr(ppb, 0x55); 481 udelay(10); /* 7 usec - infinite */ 482 w_dtr(ppb, 0x00); 483 udelay(10); /* 7 usec - infinite */ 484 w_dtr(ppb, 0xff); 485 udelay(10); /* 7 usec - infinite */ 486 s1 = r_str(ppb) & 0xb8; 487 w_dtr(ppb, 0x87); 488 udelay(10); /* 7 usec - infinite */ 489 s2 = r_str(ppb) & 0xb8; 490 w_dtr(ppb, 0x78); 491 udelay(10); /* 7 usec - infinite */ 492 s3 = r_str(ppb) & 0x38; 493 /* 494 * Values for b are: 495 * 0000 00aa Assign address aa to current device 496 * 0010 00aa Select device aa in EPP Winbond mode 497 * 0010 10aa Select device aa in EPP mode 498 * 0011 xxxx Deselect all devices 499 * 0110 00aa Test device aa 500 * 1101 00aa Select device aa in ECP mode 501 * 1110 00aa Select device aa in Compatible mode 502 */ 503 w_dtr(ppb, b); 504 udelay(2); /* 1 usec - infinite */ 505 w_ctr(ppb, 0x0c); 506 udelay(10); /* 7 usec - infinite */ 507 w_ctr(ppb, 0x0d); 508 udelay(2); /* 1 usec - infinite */ 509 w_ctr(ppb, 0x0c); 510 udelay(10); /* 7 usec - infinite */ 511 w_dtr(ppb, 0xff); 512 udelay(10); /* 7 usec - infinite */ 513 514 /* 515 * The following table is electrical pin values. 516 * (BSY is inverted at the CTR register) 517 * 518 * BSY ACK POut SEL Fault 519 * S1 0 X 1 1 1 520 * S2 1 X 0 1 1 521 * S3 L X 1 1 S 522 * 523 * L => Last device in chain 524 * S => Selected 525 * 526 * Observered values for S1,S2,S3 are: 527 * Disconnect => f8/58/78 528 * Connect => f8/58/70 529 */ 530 if ((s1 == 0xb8) && (s2 == 0x18) && (s3 == 0x30)) 531 return 1; /* Connected */ 532 if ((s1 == 0xb8) && (s2 == 0x18) && (s3 == 0x38)) 533 return 0; /* Disconnected */ 534 535 return -1; /* No device present */ 536 } 537 538 static inline int imm_connect(imm_struct *dev, int flag) 539 { 540 unsigned short ppb = dev->base; 541 542 imm_cpp(ppb, 0xe0); /* Select device 0 in compatible mode */ 543 imm_cpp(ppb, 0x30); /* Disconnect all devices */ 544 545 if ((dev->mode == IMM_EPP_8) || 546 (dev->mode == IMM_EPP_16) || 547 (dev->mode == IMM_EPP_32)) 548 return imm_cpp(ppb, 0x28); /* Select device 0 in EPP mode */ 549 return imm_cpp(ppb, 0xe0); /* Select device 0 in compatible mode */ 550 } 551 552 static void imm_disconnect(imm_struct *dev) 553 { 554 imm_cpp(dev->base, 0x30); /* Disconnect all devices */ 555 } 556 557 static int imm_select(imm_struct *dev, int target) 558 { 559 int k; 560 unsigned short ppb = dev->base; 561 562 /* 563 * Firstly we want to make sure there is nothing 564 * holding onto the SCSI bus. 565 */ 566 w_ctr(ppb, 0xc); 567 568 k = IMM_SELECT_TMO; 569 do { 570 k--; 571 } while ((r_str(ppb) & 0x08) && (k)); 572 573 if (!k) 574 return 0; 575 576 /* 577 * Now assert the SCSI ID (HOST and TARGET) on the data bus 578 */ 579 w_ctr(ppb, 0x4); 580 w_dtr(ppb, 0x80 | (1 << target)); 581 udelay(1); 582 583 /* 584 * Deassert SELIN first followed by STROBE 585 */ 586 w_ctr(ppb, 0xc); 587 w_ctr(ppb, 0xd); 588 589 /* 590 * ACK should drop low while SELIN is deasserted. 591 * FAULT should drop low when the SCSI device latches the bus. 592 */ 593 k = IMM_SELECT_TMO; 594 do { 595 k--; 596 } 597 while (!(r_str(ppb) & 0x08) && (k)); 598 599 /* 600 * Place the interface back into a sane state (status mode) 601 */ 602 w_ctr(ppb, 0xc); 603 return (k) ? 1 : 0; 604 } 605 606 static int imm_init(imm_struct *dev) 607 { 608 if (imm_connect(dev, 0) != 1) 609 return -EIO; 610 imm_reset_pulse(dev->base); 611 mdelay(1); /* Delay to allow devices to settle */ 612 imm_disconnect(dev); 613 mdelay(1); /* Another delay to allow devices to settle */ 614 return device_check(dev); 615 } 616 617 static inline int imm_send_command(struct scsi_cmnd *cmd) 618 { 619 imm_struct *dev = imm_dev(cmd->device->host); 620 int k; 621 622 /* NOTE: IMM uses byte pairs */ 623 for (k = 0; k < cmd->cmd_len; k += 2) 624 if (!imm_out(dev, &cmd->cmnd[k], 2)) 625 return 0; 626 return 1; 627 } 628 629 /* 630 * The bulk flag enables some optimisations in the data transfer loops, 631 * it should be true for any command that transfers data in integral 632 * numbers of sectors. 633 * 634 * The driver appears to remain stable if we speed up the parallel port 635 * i/o in this function, but not elsewhere. 636 */ 637 static int imm_completion(struct scsi_cmnd *cmd) 638 { 639 /* Return codes: 640 * -1 Error 641 * 0 Told to schedule 642 * 1 Finished data transfer 643 */ 644 imm_struct *dev = imm_dev(cmd->device->host); 645 unsigned short ppb = dev->base; 646 unsigned long start_jiffies = jiffies; 647 648 unsigned char r, v; 649 int fast, bulk, status; 650 651 v = cmd->cmnd[0]; 652 bulk = ((v == READ_6) || 653 (v == READ_10) || (v == WRITE_6) || (v == WRITE_10)); 654 655 /* 656 * We only get here if the drive is ready to comunicate, 657 * hence no need for a full imm_wait. 658 */ 659 w_ctr(ppb, 0x0c); 660 r = (r_str(ppb) & 0xb8); 661 662 /* 663 * while (device is not ready to send status byte) 664 * loop; 665 */ 666 while (r != (unsigned char) 0xb8) { 667 /* 668 * If we have been running for more than a full timer tick 669 * then take a rest. 670 */ 671 if (time_after(jiffies, start_jiffies + 1)) 672 return 0; 673 674 /* 675 * FAIL if: 676 * a) Drive status is screwy (!ready && !present) 677 * b) Drive is requesting/sending more data than expected 678 */ 679 if (((r & 0x88) != 0x88) || (cmd->SCp.this_residual <= 0)) { 680 imm_fail(dev, DID_ERROR); 681 return -1; /* ERROR_RETURN */ 682 } 683 /* determine if we should use burst I/O */ 684 if (dev->rd == 0) { 685 fast = (bulk 686 && (cmd->SCp.this_residual >= 687 IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 2; 688 status = imm_out(dev, cmd->SCp.ptr, fast); 689 } else { 690 fast = (bulk 691 && (cmd->SCp.this_residual >= 692 IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 1; 693 status = imm_in(dev, cmd->SCp.ptr, fast); 694 } 695 696 cmd->SCp.ptr += fast; 697 cmd->SCp.this_residual -= fast; 698 699 if (!status) { 700 imm_fail(dev, DID_BUS_BUSY); 701 return -1; /* ERROR_RETURN */ 702 } 703 if (cmd->SCp.buffer && !cmd->SCp.this_residual) { 704 /* if scatter/gather, advance to the next segment */ 705 if (cmd->SCp.buffers_residual--) { 706 cmd->SCp.buffer++; 707 cmd->SCp.this_residual = 708 cmd->SCp.buffer->length; 709 cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); 710 711 /* 712 * Make sure that we transfer even number of bytes 713 * otherwise it makes imm_byte_out() messy. 714 */ 715 if (cmd->SCp.this_residual & 0x01) 716 cmd->SCp.this_residual++; 717 } 718 } 719 /* Now check to see if the drive is ready to comunicate */ 720 w_ctr(ppb, 0x0c); 721 r = (r_str(ppb) & 0xb8); 722 723 /* If not, drop back down to the scheduler and wait a timer tick */ 724 if (!(r & 0x80)) 725 return 0; 726 } 727 return 1; /* FINISH_RETURN */ 728 } 729 730 /* 731 * Since the IMM itself doesn't generate interrupts, we use 732 * the scheduler's task queue to generate a stream of call-backs and 733 * complete the request when the drive is ready. 734 */ 735 static void imm_interrupt(struct work_struct *work) 736 { 737 imm_struct *dev = container_of(work, imm_struct, imm_tq.work); 738 struct scsi_cmnd *cmd = dev->cur_cmd; 739 struct Scsi_Host *host = cmd->device->host; 740 unsigned long flags; 741 742 if (imm_engine(dev, cmd)) { 743 schedule_delayed_work(&dev->imm_tq, 1); 744 return; 745 } 746 /* Command must of completed hence it is safe to let go... */ 747 #if IMM_DEBUG > 0 748 switch ((cmd->result >> 16) & 0xff) { 749 case DID_OK: 750 break; 751 case DID_NO_CONNECT: 752 printk("imm: no device at SCSI ID %i\n", cmd->device->id); 753 break; 754 case DID_BUS_BUSY: 755 printk("imm: BUS BUSY - EPP timeout detected\n"); 756 break; 757 case DID_TIME_OUT: 758 printk("imm: unknown timeout\n"); 759 break; 760 case DID_ABORT: 761 printk("imm: told to abort\n"); 762 break; 763 case DID_PARITY: 764 printk("imm: parity error (???)\n"); 765 break; 766 case DID_ERROR: 767 printk("imm: internal driver error\n"); 768 break; 769 case DID_RESET: 770 printk("imm: told to reset device\n"); 771 break; 772 case DID_BAD_INTR: 773 printk("imm: bad interrupt (???)\n"); 774 break; 775 default: 776 printk("imm: bad return code (%02x)\n", 777 (cmd->result >> 16) & 0xff); 778 } 779 #endif 780 781 if (cmd->SCp.phase > 1) 782 imm_disconnect(dev); 783 784 imm_pb_dismiss(dev); 785 786 spin_lock_irqsave(host->host_lock, flags); 787 dev->cur_cmd = NULL; 788 cmd->scsi_done(cmd); 789 spin_unlock_irqrestore(host->host_lock, flags); 790 return; 791 } 792 793 static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd) 794 { 795 unsigned short ppb = dev->base; 796 unsigned char l = 0, h = 0; 797 int retv, x; 798 799 /* First check for any errors that may have occurred 800 * Here we check for internal errors 801 */ 802 if (dev->failed) 803 return 0; 804 805 switch (cmd->SCp.phase) { 806 case 0: /* Phase 0 - Waiting for parport */ 807 if (time_after(jiffies, dev->jstart + HZ)) { 808 /* 809 * We waited more than a second 810 * for parport to call us 811 */ 812 imm_fail(dev, DID_BUS_BUSY); 813 return 0; 814 } 815 return 1; /* wait until imm_wakeup claims parport */ 816 /* Phase 1 - Connected */ 817 case 1: 818 imm_connect(dev, CONNECT_EPP_MAYBE); 819 cmd->SCp.phase++; 820 821 /* Phase 2 - We are now talking to the scsi bus */ 822 case 2: 823 if (!imm_select(dev, scmd_id(cmd))) { 824 imm_fail(dev, DID_NO_CONNECT); 825 return 0; 826 } 827 cmd->SCp.phase++; 828 829 /* Phase 3 - Ready to accept a command */ 830 case 3: 831 w_ctr(ppb, 0x0c); 832 if (!(r_str(ppb) & 0x80)) 833 return 1; 834 835 if (!imm_send_command(cmd)) 836 return 0; 837 cmd->SCp.phase++; 838 839 /* Phase 4 - Setup scatter/gather buffers */ 840 case 4: 841 if (scsi_bufflen(cmd)) { 842 cmd->SCp.buffer = scsi_sglist(cmd); 843 cmd->SCp.this_residual = cmd->SCp.buffer->length; 844 cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); 845 } else { 846 cmd->SCp.buffer = NULL; 847 cmd->SCp.this_residual = 0; 848 cmd->SCp.ptr = NULL; 849 } 850 cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; 851 cmd->SCp.phase++; 852 if (cmd->SCp.this_residual & 0x01) 853 cmd->SCp.this_residual++; 854 /* Phase 5 - Pre-Data transfer stage */ 855 case 5: 856 /* Spin lock for BUSY */ 857 w_ctr(ppb, 0x0c); 858 if (!(r_str(ppb) & 0x80)) 859 return 1; 860 861 /* Require negotiation for read requests */ 862 x = (r_str(ppb) & 0xb8); 863 dev->rd = (x & 0x10) ? 1 : 0; 864 dev->dp = (x & 0x20) ? 0 : 1; 865 866 if ((dev->dp) && (dev->rd)) 867 if (imm_negotiate(dev)) 868 return 0; 869 cmd->SCp.phase++; 870 871 /* Phase 6 - Data transfer stage */ 872 case 6: 873 /* Spin lock for BUSY */ 874 w_ctr(ppb, 0x0c); 875 if (!(r_str(ppb) & 0x80)) 876 return 1; 877 878 if (dev->dp) { 879 retv = imm_completion(cmd); 880 if (retv == -1) 881 return 0; 882 if (retv == 0) 883 return 1; 884 } 885 cmd->SCp.phase++; 886 887 /* Phase 7 - Post data transfer stage */ 888 case 7: 889 if ((dev->dp) && (dev->rd)) { 890 if ((dev->mode == IMM_NIBBLE) || (dev->mode == IMM_PS2)) { 891 w_ctr(ppb, 0x4); 892 w_ctr(ppb, 0xc); 893 w_ctr(ppb, 0xe); 894 w_ctr(ppb, 0x4); 895 } 896 } 897 cmd->SCp.phase++; 898 899 /* Phase 8 - Read status/message */ 900 case 8: 901 /* Check for data overrun */ 902 if (imm_wait(dev) != (unsigned char) 0xb8) { 903 imm_fail(dev, DID_ERROR); 904 return 0; 905 } 906 if (imm_negotiate(dev)) 907 return 0; 908 if (imm_in(dev, &l, 1)) { /* read status byte */ 909 /* Check for optional message byte */ 910 if (imm_wait(dev) == (unsigned char) 0xb8) 911 imm_in(dev, &h, 1); 912 cmd->result = (DID_OK << 16) + (l & STATUS_MASK); 913 } 914 if ((dev->mode == IMM_NIBBLE) || (dev->mode == IMM_PS2)) { 915 w_ctr(ppb, 0x4); 916 w_ctr(ppb, 0xc); 917 w_ctr(ppb, 0xe); 918 w_ctr(ppb, 0x4); 919 } 920 return 0; /* Finished */ 921 break; 922 923 default: 924 printk("imm: Invalid scsi phase\n"); 925 } 926 return 0; 927 } 928 929 static int imm_queuecommand(struct scsi_cmnd *cmd, 930 void (*done)(struct scsi_cmnd *)) 931 { 932 imm_struct *dev = imm_dev(cmd->device->host); 933 934 if (dev->cur_cmd) { 935 printk("IMM: bug in imm_queuecommand\n"); 936 return 0; 937 } 938 dev->failed = 0; 939 dev->jstart = jiffies; 940 dev->cur_cmd = cmd; 941 cmd->scsi_done = done; 942 cmd->result = DID_ERROR << 16; /* default return code */ 943 cmd->SCp.phase = 0; /* bus free */ 944 945 schedule_delayed_work(&dev->imm_tq, 0); 946 947 imm_pb_claim(dev); 948 949 return 0; 950 } 951 952 /* 953 * Apparently the disk->capacity attribute is off by 1 sector 954 * for all disk drives. We add the one here, but it should really 955 * be done in sd.c. Even if it gets fixed there, this will still 956 * work. 957 */ 958 static int imm_biosparam(struct scsi_device *sdev, struct block_device *dev, 959 sector_t capacity, int ip[]) 960 { 961 ip[0] = 0x40; 962 ip[1] = 0x20; 963 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]); 964 if (ip[2] > 1024) { 965 ip[0] = 0xff; 966 ip[1] = 0x3f; 967 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]); 968 } 969 return 0; 970 } 971 972 static int imm_abort(struct scsi_cmnd *cmd) 973 { 974 imm_struct *dev = imm_dev(cmd->device->host); 975 /* 976 * There is no method for aborting commands since Iomega 977 * have tied the SCSI_MESSAGE line high in the interface 978 */ 979 980 switch (cmd->SCp.phase) { 981 case 0: /* Do not have access to parport */ 982 case 1: /* Have not connected to interface */ 983 dev->cur_cmd = NULL; /* Forget the problem */ 984 return SUCCESS; 985 break; 986 default: /* SCSI command sent, can not abort */ 987 return FAILED; 988 break; 989 } 990 } 991 992 static void imm_reset_pulse(unsigned int base) 993 { 994 w_ctr(base, 0x04); 995 w_dtr(base, 0x40); 996 udelay(1); 997 w_ctr(base, 0x0c); 998 w_ctr(base, 0x0d); 999 udelay(50); 1000 w_ctr(base, 0x0c); 1001 w_ctr(base, 0x04); 1002 } 1003 1004 static int imm_reset(struct scsi_cmnd *cmd) 1005 { 1006 imm_struct *dev = imm_dev(cmd->device->host); 1007 1008 if (cmd->SCp.phase) 1009 imm_disconnect(dev); 1010 dev->cur_cmd = NULL; /* Forget the problem */ 1011 1012 imm_connect(dev, CONNECT_NORMAL); 1013 imm_reset_pulse(dev->base); 1014 mdelay(1); /* device settle delay */ 1015 imm_disconnect(dev); 1016 mdelay(1); /* device settle delay */ 1017 return SUCCESS; 1018 } 1019 1020 static int device_check(imm_struct *dev) 1021 { 1022 /* This routine looks for a device and then attempts to use EPP 1023 to send a command. If all goes as planned then EPP is available. */ 1024 1025 static char cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; 1026 int loop, old_mode, status, k, ppb = dev->base; 1027 unsigned char l; 1028 1029 old_mode = dev->mode; 1030 for (loop = 0; loop < 8; loop++) { 1031 /* Attempt to use EPP for Test Unit Ready */ 1032 if ((ppb & 0x0007) == 0x0000) 1033 dev->mode = IMM_EPP_32; 1034 1035 second_pass: 1036 imm_connect(dev, CONNECT_EPP_MAYBE); 1037 /* Select SCSI device */ 1038 if (!imm_select(dev, loop)) { 1039 imm_disconnect(dev); 1040 continue; 1041 } 1042 printk("imm: Found device at ID %i, Attempting to use %s\n", 1043 loop, IMM_MODE_STRING[dev->mode]); 1044 1045 /* Send SCSI command */ 1046 status = 1; 1047 w_ctr(ppb, 0x0c); 1048 for (l = 0; (l < 3) && (status); l++) 1049 status = imm_out(dev, &cmd[l << 1], 2); 1050 1051 if (!status) { 1052 imm_disconnect(dev); 1053 imm_connect(dev, CONNECT_EPP_MAYBE); 1054 imm_reset_pulse(dev->base); 1055 udelay(1000); 1056 imm_disconnect(dev); 1057 udelay(1000); 1058 if (dev->mode == IMM_EPP_32) { 1059 dev->mode = old_mode; 1060 goto second_pass; 1061 } 1062 printk("imm: Unable to establish communication\n"); 1063 return -EIO; 1064 } 1065 w_ctr(ppb, 0x0c); 1066 1067 k = 1000000; /* 1 Second */ 1068 do { 1069 l = r_str(ppb); 1070 k--; 1071 udelay(1); 1072 } while (!(l & 0x80) && (k)); 1073 1074 l &= 0xb8; 1075 1076 if (l != 0xb8) { 1077 imm_disconnect(dev); 1078 imm_connect(dev, CONNECT_EPP_MAYBE); 1079 imm_reset_pulse(dev->base); 1080 udelay(1000); 1081 imm_disconnect(dev); 1082 udelay(1000); 1083 if (dev->mode == IMM_EPP_32) { 1084 dev->mode = old_mode; 1085 goto second_pass; 1086 } 1087 printk 1088 ("imm: Unable to establish communication\n"); 1089 return -EIO; 1090 } 1091 imm_disconnect(dev); 1092 printk 1093 ("imm: Communication established at 0x%x with ID %i using %s\n", 1094 ppb, loop, IMM_MODE_STRING[dev->mode]); 1095 imm_connect(dev, CONNECT_EPP_MAYBE); 1096 imm_reset_pulse(dev->base); 1097 udelay(1000); 1098 imm_disconnect(dev); 1099 udelay(1000); 1100 return 0; 1101 } 1102 printk("imm: No devices found\n"); 1103 return -ENODEV; 1104 } 1105 1106 /* 1107 * imm cannot deal with highmem, so this causes all IO pages for this host 1108 * to reside in low memory (hence mapped) 1109 */ 1110 static int imm_adjust_queue(struct scsi_device *device) 1111 { 1112 blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH); 1113 return 0; 1114 } 1115 1116 static struct scsi_host_template imm_template = { 1117 .module = THIS_MODULE, 1118 .proc_name = "imm", 1119 .proc_info = imm_proc_info, 1120 .name = "Iomega VPI2 (imm) interface", 1121 .queuecommand = imm_queuecommand, 1122 .eh_abort_handler = imm_abort, 1123 .eh_bus_reset_handler = imm_reset, 1124 .eh_host_reset_handler = imm_reset, 1125 .bios_param = imm_biosparam, 1126 .this_id = 7, 1127 .sg_tablesize = SG_ALL, 1128 .cmd_per_lun = 1, 1129 .use_clustering = ENABLE_CLUSTERING, 1130 .can_queue = 1, 1131 .slave_alloc = imm_adjust_queue, 1132 }; 1133 1134 /*************************************************************************** 1135 * Parallel port probing routines * 1136 ***************************************************************************/ 1137 1138 static LIST_HEAD(imm_hosts); 1139 1140 static int __imm_attach(struct parport *pb) 1141 { 1142 struct Scsi_Host *host; 1143 imm_struct *dev; 1144 DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting); 1145 DEFINE_WAIT(wait); 1146 int ports; 1147 int modes, ppb; 1148 int err = -ENOMEM; 1149 1150 init_waitqueue_head(&waiting); 1151 1152 dev = kzalloc(sizeof(imm_struct), GFP_KERNEL); 1153 if (!dev) 1154 return -ENOMEM; 1155 1156 1157 dev->base = -1; 1158 dev->mode = IMM_AUTODETECT; 1159 INIT_LIST_HEAD(&dev->list); 1160 1161 dev->dev = parport_register_device(pb, "imm", NULL, imm_wakeup, 1162 NULL, 0, dev); 1163 1164 if (!dev->dev) 1165 goto out; 1166 1167 1168 /* Claim the bus so it remembers what we do to the control 1169 * registers. [ CTR and ECP ] 1170 */ 1171 err = -EBUSY; 1172 dev->waiting = &waiting; 1173 prepare_to_wait(&waiting, &wait, TASK_UNINTERRUPTIBLE); 1174 if (imm_pb_claim(dev)) 1175 schedule_timeout(3 * HZ); 1176 if (dev->wanted) { 1177 printk(KERN_ERR "imm%d: failed to claim parport because " 1178 "a pardevice is owning the port for too long " 1179 "time!\n", pb->number); 1180 imm_pb_dismiss(dev); 1181 dev->waiting = NULL; 1182 finish_wait(&waiting, &wait); 1183 goto out1; 1184 } 1185 dev->waiting = NULL; 1186 finish_wait(&waiting, &wait); 1187 ppb = dev->base = dev->dev->port->base; 1188 dev->base_hi = dev->dev->port->base_hi; 1189 w_ctr(ppb, 0x0c); 1190 modes = dev->dev->port->modes; 1191 1192 /* Mode detection works up the chain of speed 1193 * This avoids a nasty if-then-else-if-... tree 1194 */ 1195 dev->mode = IMM_NIBBLE; 1196 1197 if (modes & PARPORT_MODE_TRISTATE) 1198 dev->mode = IMM_PS2; 1199 1200 /* Done configuration */ 1201 1202 err = imm_init(dev); 1203 1204 imm_pb_release(dev); 1205 1206 if (err) 1207 goto out1; 1208 1209 /* now the glue ... */ 1210 if (dev->mode == IMM_NIBBLE || dev->mode == IMM_PS2) 1211 ports = 3; 1212 else 1213 ports = 8; 1214 1215 INIT_DELAYED_WORK(&dev->imm_tq, imm_interrupt); 1216 1217 err = -ENOMEM; 1218 host = scsi_host_alloc(&imm_template, sizeof(imm_struct *)); 1219 if (!host) 1220 goto out1; 1221 host->io_port = pb->base; 1222 host->n_io_port = ports; 1223 host->dma_channel = -1; 1224 host->unique_id = pb->number; 1225 *(imm_struct **)&host->hostdata = dev; 1226 dev->host = host; 1227 list_add_tail(&dev->list, &imm_hosts); 1228 err = scsi_add_host(host, NULL); 1229 if (err) 1230 goto out2; 1231 scsi_scan_host(host); 1232 return 0; 1233 1234 out2: 1235 list_del_init(&dev->list); 1236 scsi_host_put(host); 1237 out1: 1238 parport_unregister_device(dev->dev); 1239 out: 1240 kfree(dev); 1241 return err; 1242 } 1243 1244 static void imm_attach(struct parport *pb) 1245 { 1246 __imm_attach(pb); 1247 } 1248 1249 static void imm_detach(struct parport *pb) 1250 { 1251 imm_struct *dev; 1252 list_for_each_entry(dev, &imm_hosts, list) { 1253 if (dev->dev->port == pb) { 1254 list_del_init(&dev->list); 1255 scsi_remove_host(dev->host); 1256 scsi_host_put(dev->host); 1257 parport_unregister_device(dev->dev); 1258 kfree(dev); 1259 break; 1260 } 1261 } 1262 } 1263 1264 static struct parport_driver imm_driver = { 1265 .name = "imm", 1266 .attach = imm_attach, 1267 .detach = imm_detach, 1268 }; 1269 1270 static int __init imm_driver_init(void) 1271 { 1272 printk("imm: Version %s\n", IMM_VERSION); 1273 return parport_register_driver(&imm_driver); 1274 } 1275 1276 static void __exit imm_driver_exit(void) 1277 { 1278 parport_unregister_driver(&imm_driver); 1279 } 1280 1281 module_init(imm_driver_init); 1282 module_exit(imm_driver_exit); 1283 1284 MODULE_LICENSE("GPL"); 1285