1 /* 2 * Disk Array driver for HP Smart Array SAS controllers 3 * Copyright 2016 Microsemi Corporation 4 * Copyright 2014-2015 PMC-Sierra, Inc. 5 * Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; version 2 of the License. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 14 * NON INFRINGEMENT. See the GNU General Public License for more details. 15 * 16 * Questions/Comments/Bugfixes to esc.storagedev@microsemi.com 17 * 18 */ 19 #ifndef HPSA_CMD_H 20 #define HPSA_CMD_H 21 22 /* general boundary defintions */ 23 #define SENSEINFOBYTES 32 /* may vary between hbas */ 24 #define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */ 25 #define HPSA_SG_CHAIN 0x80000000 26 #define HPSA_SG_LAST 0x40000000 27 #define MAXREPLYQS 256 28 29 /* Command Status value */ 30 #define CMD_SUCCESS 0x0000 31 #define CMD_TARGET_STATUS 0x0001 32 #define CMD_DATA_UNDERRUN 0x0002 33 #define CMD_DATA_OVERRUN 0x0003 34 #define CMD_INVALID 0x0004 35 #define CMD_PROTOCOL_ERR 0x0005 36 #define CMD_HARDWARE_ERR 0x0006 37 #define CMD_CONNECTION_LOST 0x0007 38 #define CMD_ABORTED 0x0008 39 #define CMD_ABORT_FAILED 0x0009 40 #define CMD_UNSOLICITED_ABORT 0x000A 41 #define CMD_TIMEOUT 0x000B 42 #define CMD_UNABORTABLE 0x000C 43 #define CMD_TMF_STATUS 0x000D 44 #define CMD_IOACCEL_DISABLED 0x000E 45 #define CMD_CTLR_LOCKUP 0xffff 46 /* Note: CMD_CTLR_LOCKUP is not a value defined by the CISS spec 47 * it is a value defined by the driver that commands can be marked 48 * with when a controller lockup has been detected by the driver 49 */ 50 51 /* TMF function status values */ 52 #define CISS_TMF_COMPLETE 0x00 53 #define CISS_TMF_INVALID_FRAME 0x02 54 #define CISS_TMF_NOT_SUPPORTED 0x04 55 #define CISS_TMF_FAILED 0x05 56 #define CISS_TMF_SUCCESS 0x08 57 #define CISS_TMF_WRONG_LUN 0x09 58 #define CISS_TMF_OVERLAPPED_TAG 0x0a 59 60 /* Unit Attentions ASC's as defined for the MSA2012sa */ 61 #define POWER_OR_RESET 0x29 62 #define STATE_CHANGED 0x2a 63 #define UNIT_ATTENTION_CLEARED 0x2f 64 #define LUN_FAILED 0x3e 65 #define REPORT_LUNS_CHANGED 0x3f 66 67 /* Unit Attentions ASCQ's as defined for the MSA2012sa */ 68 69 /* These ASCQ's defined for ASC = POWER_OR_RESET */ 70 #define POWER_ON_RESET 0x00 71 #define POWER_ON_REBOOT 0x01 72 #define SCSI_BUS_RESET 0x02 73 #define MSA_TARGET_RESET 0x03 74 #define CONTROLLER_FAILOVER 0x04 75 #define TRANSCEIVER_SE 0x05 76 #define TRANSCEIVER_LVD 0x06 77 78 /* These ASCQ's defined for ASC = STATE_CHANGED */ 79 #define RESERVATION_PREEMPTED 0x03 80 #define ASYM_ACCESS_CHANGED 0x06 81 #define LUN_CAPACITY_CHANGED 0x09 82 83 /* transfer direction */ 84 #define XFER_NONE 0x00 85 #define XFER_WRITE 0x01 86 #define XFER_READ 0x02 87 #define XFER_RSVD 0x03 88 89 /* task attribute */ 90 #define ATTR_UNTAGGED 0x00 91 #define ATTR_SIMPLE 0x04 92 #define ATTR_HEADOFQUEUE 0x05 93 #define ATTR_ORDERED 0x06 94 #define ATTR_ACA 0x07 95 96 /* cdb type */ 97 #define TYPE_CMD 0x00 98 #define TYPE_MSG 0x01 99 #define TYPE_IOACCEL2_CMD 0x81 /* 0x81 is not used by hardware */ 100 101 /* Message Types */ 102 #define HPSA_TASK_MANAGEMENT 0x00 103 #define HPSA_RESET 0x01 104 #define HPSA_SCAN 0x02 105 #define HPSA_NOOP 0x03 106 107 #define HPSA_CTLR_RESET_TYPE 0x00 108 #define HPSA_BUS_RESET_TYPE 0x01 109 #define HPSA_TARGET_RESET_TYPE 0x03 110 #define HPSA_LUN_RESET_TYPE 0x04 111 #define HPSA_NEXUS_RESET_TYPE 0x05 112 113 /* Task Management Functions */ 114 #define HPSA_TMF_ABORT_TASK 0x00 115 #define HPSA_TMF_ABORT_TASK_SET 0x01 116 #define HPSA_TMF_CLEAR_ACA 0x02 117 #define HPSA_TMF_CLEAR_TASK_SET 0x03 118 #define HPSA_TMF_QUERY_TASK 0x04 119 #define HPSA_TMF_QUERY_TASK_SET 0x05 120 #define HPSA_TMF_QUERY_ASYNCEVENT 0x06 121 122 123 124 /* config space register offsets */ 125 #define CFG_VENDORID 0x00 126 #define CFG_DEVICEID 0x02 127 #define CFG_I2OBAR 0x10 128 #define CFG_MEM1BAR 0x14 129 130 /* i2o space register offsets */ 131 #define I2O_IBDB_SET 0x20 132 #define I2O_IBDB_CLEAR 0x70 133 #define I2O_INT_STATUS 0x30 134 #define I2O_INT_MASK 0x34 135 #define I2O_IBPOST_Q 0x40 136 #define I2O_OBPOST_Q 0x44 137 #define I2O_DMA1_CFG 0x214 138 139 /* Configuration Table */ 140 #define CFGTBL_ChangeReq 0x00000001l 141 #define CFGTBL_AccCmds 0x00000001l 142 #define DOORBELL_CTLR_RESET 0x00000004l 143 #define DOORBELL_CTLR_RESET2 0x00000020l 144 #define DOORBELL_CLEAR_EVENTS 0x00000040l 145 146 #define CFGTBL_Trans_Simple 0x00000002l 147 #define CFGTBL_Trans_Performant 0x00000004l 148 #define CFGTBL_Trans_io_accel1 0x00000080l 149 #define CFGTBL_Trans_io_accel2 0x00000100l 150 #define CFGTBL_Trans_use_short_tags 0x20000000l 151 #define CFGTBL_Trans_enable_directed_msix (1 << 30) 152 153 #define CFGTBL_BusType_Ultra2 0x00000001l 154 #define CFGTBL_BusType_Ultra3 0x00000002l 155 #define CFGTBL_BusType_Fibre1G 0x00000100l 156 #define CFGTBL_BusType_Fibre2G 0x00000200l 157 158 /* VPD Inquiry types */ 159 #define HPSA_INQUIRY_FAILED 0x02 160 #define HPSA_VPD_SUPPORTED_PAGES 0x00 161 #define HPSA_VPD_LV_DEVICE_ID 0x83 162 #define HPSA_VPD_LV_DEVICE_GEOMETRY 0xC1 163 #define HPSA_VPD_LV_IOACCEL_STATUS 0xC2 164 #define HPSA_VPD_LV_STATUS 0xC3 165 #define HPSA_VPD_HEADER_SZ 4 166 167 /* Logical volume states */ 168 #define HPSA_VPD_LV_STATUS_UNSUPPORTED 0xff 169 #define HPSA_LV_OK 0x0 170 #define HPSA_LV_FAILED 0x01 171 #define HPSA_LV_NOT_AVAILABLE 0x0b 172 #define HPSA_LV_UNDERGOING_ERASE 0x0F 173 #define HPSA_LV_UNDERGOING_RPI 0x12 174 #define HPSA_LV_PENDING_RPI 0x13 175 #define HPSA_LV_ENCRYPTED_NO_KEY 0x14 176 #define HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER 0x15 177 #define HPSA_LV_UNDERGOING_ENCRYPTION 0x16 178 #define HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING 0x17 179 #define HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER 0x18 180 #define HPSA_LV_PENDING_ENCRYPTION 0x19 181 #define HPSA_LV_PENDING_ENCRYPTION_REKEYING 0x1A 182 183 struct vals32 { 184 u32 lower; 185 u32 upper; 186 }; 187 188 union u64bit { 189 struct vals32 val32; 190 u64 val; 191 }; 192 193 /* FIXME this is a per controller value (barf!) */ 194 #define HPSA_MAX_LUN 1024 195 #define HPSA_MAX_PHYS_LUN 1024 196 #define MAX_EXT_TARGETS 32 197 #define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \ 198 MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */ 199 200 /* SCSI-3 Commands */ 201 #pragma pack(1) 202 203 #define HPSA_INQUIRY 0x12 204 struct InquiryData { 205 u8 data_byte[36]; 206 }; 207 208 #define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */ 209 #define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */ 210 #define HPSA_REPORT_PHYS_EXTENDED 0x02 211 #define HPSA_CISS_READ 0xc0 /* CISS Read */ 212 #define HPSA_GET_RAID_MAP 0xc8 /* CISS Get RAID Layout Map */ 213 214 #define RAID_MAP_MAX_ENTRIES 256 215 216 struct raid_map_disk_data { 217 u32 ioaccel_handle; /**< Handle to access this disk via the 218 * I/O accelerator */ 219 u8 xor_mult[2]; /**< XOR multipliers for this position, 220 * valid for data disks only */ 221 u8 reserved[2]; 222 }; 223 224 struct raid_map_data { 225 __le32 structure_size; /* Size of entire structure in bytes */ 226 __le32 volume_blk_size; /* bytes / block in the volume */ 227 __le64 volume_blk_cnt; /* logical blocks on the volume */ 228 u8 phys_blk_shift; /* Shift factor to convert between 229 * units of logical blocks and physical 230 * disk blocks */ 231 u8 parity_rotation_shift; /* Shift factor to convert between units 232 * of logical stripes and physical 233 * stripes */ 234 __le16 strip_size; /* blocks used on each disk / stripe */ 235 __le64 disk_starting_blk; /* First disk block used in volume */ 236 __le64 disk_blk_cnt; /* disk blocks used by volume / disk */ 237 __le16 data_disks_per_row; /* data disk entries / row in the map */ 238 __le16 metadata_disks_per_row;/* mirror/parity disk entries / row 239 * in the map */ 240 __le16 row_cnt; /* rows in each layout map */ 241 __le16 layout_map_count; /* layout maps (1 map per mirror/parity 242 * group) */ 243 __le16 flags; /* Bit 0 set if encryption enabled */ 244 #define RAID_MAP_FLAG_ENCRYPT_ON 0x01 245 __le16 dekindex; /* Data encryption key index. */ 246 u8 reserved[16]; 247 struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES]; 248 }; 249 250 struct ReportLUNdata { 251 u8 LUNListLength[4]; 252 u8 extended_response_flag; 253 u8 reserved[3]; 254 u8 LUN[HPSA_MAX_LUN][8]; 255 }; 256 257 struct ext_report_lun_entry { 258 u8 lunid[8]; 259 #define MASKED_DEVICE(x) ((x)[3] & 0xC0) 260 #define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F) 261 #define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6]) 262 #define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \ 263 GET_BMIC_LEVEL_TWO_TARGET((lunid))) 264 u8 wwid[8]; 265 u8 device_type; 266 u8 device_flags; 267 u8 lun_count; /* multi-lun device, how many luns */ 268 u8 redundant_paths; 269 u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */ 270 }; 271 272 struct ReportExtendedLUNdata { 273 u8 LUNListLength[4]; 274 u8 extended_response_flag; 275 u8 reserved[3]; 276 struct ext_report_lun_entry LUN[HPSA_MAX_PHYS_LUN]; 277 }; 278 279 struct SenseSubsystem_info { 280 u8 reserved[36]; 281 u8 portname[8]; 282 u8 reserved1[1108]; 283 }; 284 285 /* BMIC commands */ 286 #define BMIC_READ 0x26 287 #define BMIC_WRITE 0x27 288 #define BMIC_CACHE_FLUSH 0xc2 289 #define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */ 290 #define BMIC_FLASH_FIRMWARE 0xF7 291 #define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64 292 #define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15 293 #define BMIC_IDENTIFY_CONTROLLER 0x11 294 #define BMIC_SET_DIAG_OPTIONS 0xF4 295 #define BMIC_SENSE_DIAG_OPTIONS 0xF5 296 #define HPSA_DIAG_OPTS_DISABLE_RLD_CACHING 0x80000000 297 #define BMIC_SENSE_SUBSYSTEM_INFORMATION 0x66 298 #define BMIC_SENSE_STORAGE_BOX_PARAMS 0x65 299 300 /* Command List Structure */ 301 union SCSI3Addr { 302 struct { 303 u8 Dev; 304 u8 Bus:6; 305 u8 Mode:2; /* b00 */ 306 } PeripDev; 307 struct { 308 u8 DevLSB; 309 u8 DevMSB:6; 310 u8 Mode:2; /* b01 */ 311 } LogDev; 312 struct { 313 u8 Dev:5; 314 u8 Bus:3; 315 u8 Targ:6; 316 u8 Mode:2; /* b10 */ 317 } LogUnit; 318 }; 319 320 struct PhysDevAddr { 321 u32 TargetId:24; 322 u32 Bus:6; 323 u32 Mode:2; 324 /* 2 level target device addr */ 325 union SCSI3Addr Target[2]; 326 }; 327 328 struct LogDevAddr { 329 u32 VolId:30; 330 u32 Mode:2; 331 u8 reserved[4]; 332 }; 333 334 union LUNAddr { 335 u8 LunAddrBytes[8]; 336 union SCSI3Addr SCSI3Lun[4]; 337 struct PhysDevAddr PhysDev; 338 struct LogDevAddr LogDev; 339 }; 340 341 struct CommandListHeader { 342 u8 ReplyQueue; 343 u8 SGList; 344 __le16 SGTotal; 345 __le64 tag; 346 union LUNAddr LUN; 347 }; 348 349 struct RequestBlock { 350 u8 CDBLen; 351 /* 352 * type_attr_dir: 353 * type: low 3 bits 354 * attr: middle 3 bits 355 * dir: high 2 bits 356 */ 357 u8 type_attr_dir; 358 #define TYPE_ATTR_DIR(t, a, d) ((((d) & 0x03) << 6) |\ 359 (((a) & 0x07) << 3) |\ 360 ((t) & 0x07)) 361 #define GET_TYPE(tad) ((tad) & 0x07) 362 #define GET_ATTR(tad) (((tad) >> 3) & 0x07) 363 #define GET_DIR(tad) (((tad) >> 6) & 0x03) 364 u16 Timeout; 365 u8 CDB[16]; 366 }; 367 368 struct ErrDescriptor { 369 __le64 Addr; 370 __le32 Len; 371 }; 372 373 struct SGDescriptor { 374 __le64 Addr; 375 __le32 Len; 376 __le32 Ext; 377 }; 378 379 union MoreErrInfo { 380 struct { 381 u8 Reserved[3]; 382 u8 Type; 383 u32 ErrorInfo; 384 } Common_Info; 385 struct { 386 u8 Reserved[2]; 387 u8 offense_size; /* size of offending entry */ 388 u8 offense_num; /* byte # of offense 0-base */ 389 u32 offense_value; 390 } Invalid_Cmd; 391 }; 392 struct ErrorInfo { 393 u8 ScsiStatus; 394 u8 SenseLen; 395 u16 CommandStatus; 396 u32 ResidualCnt; 397 union MoreErrInfo MoreErrInfo; 398 u8 SenseInfo[SENSEINFOBYTES]; 399 }; 400 /* Command types */ 401 #define CMD_IOCTL_PEND 0x01 402 #define CMD_SCSI 0x03 403 #define CMD_IOACCEL1 0x04 404 #define CMD_IOACCEL2 0x05 405 #define IOACCEL2_TMF 0x06 406 407 #define DIRECT_LOOKUP_SHIFT 4 408 #define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1)) 409 410 #define HPSA_ERROR_BIT 0x02 411 struct ctlr_info; /* defined in hpsa.h */ 412 /* The size of this structure needs to be divisible by 128 413 * on all architectures. The low 4 bits of the addresses 414 * are used as follows: 415 * 416 * bit 0: to device, used to indicate "performant mode" command 417 * from device, indidcates error status. 418 * bit 1-3: to device, indicates block fetch table entry for 419 * reducing DMA in fetching commands from host memory. 420 */ 421 422 #define COMMANDLIST_ALIGNMENT 128 423 struct CommandList { 424 struct CommandListHeader Header; 425 struct RequestBlock Request; 426 struct ErrDescriptor ErrDesc; 427 struct SGDescriptor SG[SG_ENTRIES_IN_CMD]; 428 /* information associated with the command */ 429 u32 busaddr; /* physical addr of this record */ 430 struct ErrorInfo *err_info; /* pointer to the allocated mem */ 431 struct ctlr_info *h; 432 int cmd_type; 433 long cmdindex; 434 struct completion *waiting; 435 struct scsi_cmnd *scsi_cmd; 436 struct work_struct work; 437 438 /* 439 * For commands using either of the two "ioaccel" paths to 440 * bypass the RAID stack and go directly to the physical disk 441 * phys_disk is a pointer to the hpsa_scsi_dev_t to which the 442 * i/o is destined. We need to store that here because the command 443 * may potentially encounter TASK SET FULL and need to be resubmitted 444 * For "normal" i/o's not using the "ioaccel" paths, phys_disk is 445 * not used. 446 */ 447 struct hpsa_scsi_dev_t *phys_disk; 448 449 int abort_pending; 450 struct hpsa_scsi_dev_t *reset_pending; 451 atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */ 452 } __aligned(COMMANDLIST_ALIGNMENT); 453 454 /* Max S/G elements in I/O accelerator command */ 455 #define IOACCEL1_MAXSGENTRIES 24 456 #define IOACCEL2_MAXSGENTRIES 28 457 458 /* 459 * Structure for I/O accelerator (mode 1) commands. 460 * Note that this structure must be 128-byte aligned in size. 461 */ 462 #define IOACCEL1_COMMANDLIST_ALIGNMENT 128 463 struct io_accel1_cmd { 464 __le16 dev_handle; /* 0x00 - 0x01 */ 465 u8 reserved1; /* 0x02 */ 466 u8 function; /* 0x03 */ 467 u8 reserved2[8]; /* 0x04 - 0x0B */ 468 u32 err_info; /* 0x0C - 0x0F */ 469 u8 reserved3[2]; /* 0x10 - 0x11 */ 470 u8 err_info_len; /* 0x12 */ 471 u8 reserved4; /* 0x13 */ 472 u8 sgl_offset; /* 0x14 */ 473 u8 reserved5[7]; /* 0x15 - 0x1B */ 474 __le32 transfer_len; /* 0x1C - 0x1F */ 475 u8 reserved6[4]; /* 0x20 - 0x23 */ 476 __le16 io_flags; /* 0x24 - 0x25 */ 477 u8 reserved7[14]; /* 0x26 - 0x33 */ 478 u8 LUN[8]; /* 0x34 - 0x3B */ 479 __le32 control; /* 0x3C - 0x3F */ 480 u8 CDB[16]; /* 0x40 - 0x4F */ 481 u8 reserved8[16]; /* 0x50 - 0x5F */ 482 __le16 host_context_flags; /* 0x60 - 0x61 */ 483 __le16 timeout_sec; /* 0x62 - 0x63 */ 484 u8 ReplyQueue; /* 0x64 */ 485 u8 reserved9[3]; /* 0x65 - 0x67 */ 486 __le64 tag; /* 0x68 - 0x6F */ 487 __le64 host_addr; /* 0x70 - 0x77 */ 488 u8 CISS_LUN[8]; /* 0x78 - 0x7F */ 489 struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES]; 490 } __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT); 491 492 #define IOACCEL1_FUNCTION_SCSIIO 0x00 493 #define IOACCEL1_SGLOFFSET 32 494 495 #define IOACCEL1_IOFLAGS_IO_REQ 0x4000 496 #define IOACCEL1_IOFLAGS_CDBLEN_MASK 0x001F 497 #define IOACCEL1_IOFLAGS_CDBLEN_MAX 16 498 499 #define IOACCEL1_CONTROL_NODATAXFER 0x00000000 500 #define IOACCEL1_CONTROL_DATA_OUT 0x01000000 501 #define IOACCEL1_CONTROL_DATA_IN 0x02000000 502 #define IOACCEL1_CONTROL_TASKPRIO_MASK 0x00007800 503 #define IOACCEL1_CONTROL_TASKPRIO_SHIFT 11 504 #define IOACCEL1_CONTROL_SIMPLEQUEUE 0x00000000 505 #define IOACCEL1_CONTROL_HEADOFQUEUE 0x00000100 506 #define IOACCEL1_CONTROL_ORDEREDQUEUE 0x00000200 507 #define IOACCEL1_CONTROL_ACA 0x00000400 508 509 #define IOACCEL1_HCFLAGS_CISS_FORMAT 0x0013 510 511 #define IOACCEL1_BUSADDR_CMDTYPE 0x00000060 512 513 struct ioaccel2_sg_element { 514 __le64 address; 515 __le32 length; 516 u8 reserved[3]; 517 u8 chain_indicator; 518 #define IOACCEL2_CHAIN 0x80 519 }; 520 521 /* 522 * SCSI Response Format structure for IO Accelerator Mode 2 523 */ 524 struct io_accel2_scsi_response { 525 u8 IU_type; 526 #define IOACCEL2_IU_TYPE_SRF 0x60 527 u8 reserved1[3]; 528 u8 req_id[4]; /* request identifier */ 529 u8 reserved2[4]; 530 u8 serv_response; /* service response */ 531 #define IOACCEL2_SERV_RESPONSE_COMPLETE 0x000 532 #define IOACCEL2_SERV_RESPONSE_FAILURE 0x001 533 #define IOACCEL2_SERV_RESPONSE_TMF_COMPLETE 0x002 534 #define IOACCEL2_SERV_RESPONSE_TMF_SUCCESS 0x003 535 #define IOACCEL2_SERV_RESPONSE_TMF_REJECTED 0x004 536 #define IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN 0x005 537 u8 status; /* status */ 538 #define IOACCEL2_STATUS_SR_TASK_COMP_GOOD 0x00 539 #define IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND 0x02 540 #define IOACCEL2_STATUS_SR_TASK_COMP_BUSY 0x08 541 #define IOACCEL2_STATUS_SR_TASK_COMP_RES_CON 0x18 542 #define IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL 0x28 543 #define IOACCEL2_STATUS_SR_TASK_COMP_ABORTED 0x40 544 #define IOACCEL2_STATUS_SR_IOACCEL_DISABLED 0x0E 545 #define IOACCEL2_STATUS_SR_IO_ERROR 0x01 546 #define IOACCEL2_STATUS_SR_IO_ABORTED 0x02 547 #define IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE 0x03 548 #define IOACCEL2_STATUS_SR_INVALID_DEVICE 0x04 549 #define IOACCEL2_STATUS_SR_UNDERRUN 0x51 550 #define IOACCEL2_STATUS_SR_OVERRUN 0x75 551 u8 data_present; /* low 2 bits */ 552 #define IOACCEL2_NO_DATAPRESENT 0x000 553 #define IOACCEL2_RESPONSE_DATAPRESENT 0x001 554 #define IOACCEL2_SENSE_DATA_PRESENT 0x002 555 #define IOACCEL2_RESERVED 0x003 556 u8 sense_data_len; /* sense/response data length */ 557 u8 resid_cnt[4]; /* residual count */ 558 u8 sense_data_buff[32]; /* sense/response data buffer */ 559 }; 560 561 /* 562 * Structure for I/O accelerator (mode 2 or m2) commands. 563 * Note that this structure must be 128-byte aligned in size. 564 */ 565 #define IOACCEL2_COMMANDLIST_ALIGNMENT 128 566 struct io_accel2_cmd { 567 u8 IU_type; /* IU Type */ 568 u8 direction; /* direction, memtype, and encryption */ 569 #define IOACCEL2_DIRECTION_MASK 0x03 /* bits 0,1: direction */ 570 #define IOACCEL2_DIRECTION_MEMTYPE_MASK 0x04 /* bit 2: memtype source/dest */ 571 /* 0b=PCIe, 1b=DDR */ 572 #define IOACCEL2_DIRECTION_ENCRYPT_MASK 0x08 /* bit 3: encryption flag */ 573 /* 0=off, 1=on */ 574 u8 reply_queue; /* Reply Queue ID */ 575 u8 reserved1; /* Reserved */ 576 __le32 scsi_nexus; /* Device Handle */ 577 __le32 Tag; /* cciss tag, lower 4 bytes only */ 578 __le32 tweak_lower; /* Encryption tweak, lower 4 bytes */ 579 u8 cdb[16]; /* SCSI Command Descriptor Block */ 580 u8 cciss_lun[8]; /* 8 byte SCSI address */ 581 __le32 data_len; /* Total bytes to transfer */ 582 u8 cmd_priority_task_attr; /* priority and task attrs */ 583 #define IOACCEL2_PRIORITY_MASK 0x78 584 #define IOACCEL2_ATTR_MASK 0x07 585 u8 sg_count; /* Number of sg elements */ 586 __le16 dekindex; /* Data encryption key index */ 587 __le64 err_ptr; /* Error Pointer */ 588 __le32 err_len; /* Error Length*/ 589 __le32 tweak_upper; /* Encryption tweak, upper 4 bytes */ 590 struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES]; 591 struct io_accel2_scsi_response error_data; 592 } __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); 593 594 /* 595 * defines for Mode 2 command struct 596 * FIXME: this can't be all I need mfm 597 */ 598 #define IOACCEL2_IU_TYPE 0x40 599 #define IOACCEL2_IU_TMF_TYPE 0x41 600 #define IOACCEL2_DIR_NO_DATA 0x00 601 #define IOACCEL2_DIR_DATA_IN 0x01 602 #define IOACCEL2_DIR_DATA_OUT 0x02 603 #define IOACCEL2_TMF_ABORT 0x01 604 /* 605 * SCSI Task Management Request format for Accelerator Mode 2 606 */ 607 struct hpsa_tmf_struct { 608 u8 iu_type; /* Information Unit Type */ 609 u8 reply_queue; /* Reply Queue ID */ 610 u8 tmf; /* Task Management Function */ 611 u8 reserved1; /* byte 3 Reserved */ 612 __le32 it_nexus; /* SCSI I-T Nexus */ 613 u8 lun_id[8]; /* LUN ID for TMF request */ 614 __le64 tag; /* cciss tag associated w/ request */ 615 __le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */ 616 __le64 error_ptr; /* Error Pointer */ 617 __le32 error_len; /* Error Length */ 618 } __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); 619 620 /* Configuration Table Structure */ 621 struct HostWrite { 622 __le32 TransportRequest; 623 __le32 command_pool_addr_hi; 624 __le32 CoalIntDelay; 625 __le32 CoalIntCount; 626 }; 627 628 #define SIMPLE_MODE 0x02 629 #define PERFORMANT_MODE 0x04 630 #define MEMQ_MODE 0x08 631 #define IOACCEL_MODE_1 0x80 632 633 #define DRIVER_SUPPORT_UA_ENABLE 0x00000001 634 635 struct CfgTable { 636 u8 Signature[4]; 637 __le32 SpecValence; 638 __le32 TransportSupport; 639 __le32 TransportActive; 640 struct HostWrite HostWrite; 641 __le32 CmdsOutMax; 642 __le32 BusTypes; 643 __le32 TransMethodOffset; 644 u8 ServerName[16]; 645 __le32 HeartBeat; 646 __le32 driver_support; 647 #define ENABLE_SCSI_PREFETCH 0x100 648 #define ENABLE_UNIT_ATTN 0x01 649 __le32 MaxScatterGatherElements; 650 __le32 MaxLogicalUnits; 651 __le32 MaxPhysicalDevices; 652 __le32 MaxPhysicalDrivesPerLogicalUnit; 653 __le32 MaxPerformantModeCommands; 654 __le32 MaxBlockFetch; 655 __le32 PowerConservationSupport; 656 __le32 PowerConservationEnable; 657 __le32 TMFSupportFlags; 658 u8 TMFTagMask[8]; 659 u8 reserved[0x78 - 0x70]; 660 __le32 misc_fw_support; /* offset 0x78 */ 661 #define MISC_FW_DOORBELL_RESET 0x02 662 #define MISC_FW_DOORBELL_RESET2 0x010 663 #define MISC_FW_RAID_OFFLOAD_BASIC 0x020 664 #define MISC_FW_EVENT_NOTIFY 0x080 665 u8 driver_version[32]; 666 __le32 max_cached_write_size; 667 u8 driver_scratchpad[16]; 668 __le32 max_error_info_length; 669 __le32 io_accel_max_embedded_sg_count; 670 __le32 io_accel_request_size_offset; 671 __le32 event_notify; 672 #define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30) 673 #define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31) 674 __le32 clear_event_notify; 675 }; 676 677 #define NUM_BLOCKFETCH_ENTRIES 8 678 struct TransTable_struct { 679 __le32 BlockFetch[NUM_BLOCKFETCH_ENTRIES]; 680 __le32 RepQSize; 681 __le32 RepQCount; 682 __le32 RepQCtrAddrLow32; 683 __le32 RepQCtrAddrHigh32; 684 #define MAX_REPLY_QUEUES 64 685 struct vals32 RepQAddr[MAX_REPLY_QUEUES]; 686 }; 687 688 struct hpsa_pci_info { 689 unsigned char bus; 690 unsigned char dev_fn; 691 unsigned short domain; 692 u32 board_id; 693 }; 694 695 struct bmic_identify_controller { 696 u8 configured_logical_drive_count; /* offset 0 */ 697 u8 pad1[153]; 698 __le16 extended_logical_unit_count; /* offset 154 */ 699 u8 pad2[136]; 700 u8 controller_mode; /* offset 292 */ 701 u8 pad3[32]; 702 }; 703 704 705 struct bmic_identify_physical_device { 706 u8 scsi_bus; /* SCSI Bus number on controller */ 707 u8 scsi_id; /* SCSI ID on this bus */ 708 __le16 block_size; /* sector size in bytes */ 709 __le32 total_blocks; /* number for sectors on drive */ 710 __le32 reserved_blocks; /* controller reserved (RIS) */ 711 u8 model[40]; /* Physical Drive Model */ 712 u8 serial_number[40]; /* Drive Serial Number */ 713 u8 firmware_revision[8]; /* drive firmware revision */ 714 u8 scsi_inquiry_bits; /* inquiry byte 7 bits */ 715 u8 compaq_drive_stamp; /* 0 means drive not stamped */ 716 u8 last_failure_reason; 717 #define BMIC_LAST_FAILURE_TOO_SMALL_IN_LOAD_CONFIG 0x01 718 #define BMIC_LAST_FAILURE_ERROR_ERASING_RIS 0x02 719 #define BMIC_LAST_FAILURE_ERROR_SAVING_RIS 0x03 720 #define BMIC_LAST_FAILURE_FAIL_DRIVE_COMMAND 0x04 721 #define BMIC_LAST_FAILURE_MARK_BAD_FAILED 0x05 722 #define BMIC_LAST_FAILURE_MARK_BAD_FAILED_IN_FINISH_REMAP 0x06 723 #define BMIC_LAST_FAILURE_TIMEOUT 0x07 724 #define BMIC_LAST_FAILURE_AUTOSENSE_FAILED 0x08 725 #define BMIC_LAST_FAILURE_MEDIUM_ERROR_1 0x09 726 #define BMIC_LAST_FAILURE_MEDIUM_ERROR_2 0x0a 727 #define BMIC_LAST_FAILURE_NOT_READY_BAD_SENSE 0x0b 728 #define BMIC_LAST_FAILURE_NOT_READY 0x0c 729 #define BMIC_LAST_FAILURE_HARDWARE_ERROR 0x0d 730 #define BMIC_LAST_FAILURE_ABORTED_COMMAND 0x0e 731 #define BMIC_LAST_FAILURE_WRITE_PROTECTED 0x0f 732 #define BMIC_LAST_FAILURE_SPIN_UP_FAILURE_IN_RECOVER 0x10 733 #define BMIC_LAST_FAILURE_REBUILD_WRITE_ERROR 0x11 734 #define BMIC_LAST_FAILURE_TOO_SMALL_IN_HOT_PLUG 0x12 735 #define BMIC_LAST_FAILURE_BUS_RESET_RECOVERY_ABORTED 0x13 736 #define BMIC_LAST_FAILURE_REMOVED_IN_HOT_PLUG 0x14 737 #define BMIC_LAST_FAILURE_INIT_REQUEST_SENSE_FAILED 0x15 738 #define BMIC_LAST_FAILURE_INIT_START_UNIT_FAILED 0x16 739 #define BMIC_LAST_FAILURE_INQUIRY_FAILED 0x17 740 #define BMIC_LAST_FAILURE_NON_DISK_DEVICE 0x18 741 #define BMIC_LAST_FAILURE_READ_CAPACITY_FAILED 0x19 742 #define BMIC_LAST_FAILURE_INVALID_BLOCK_SIZE 0x1a 743 #define BMIC_LAST_FAILURE_HOT_PLUG_REQUEST_SENSE_FAILED 0x1b 744 #define BMIC_LAST_FAILURE_HOT_PLUG_START_UNIT_FAILED 0x1c 745 #define BMIC_LAST_FAILURE_WRITE_ERROR_AFTER_REMAP 0x1d 746 #define BMIC_LAST_FAILURE_INIT_RESET_RECOVERY_ABORTED 0x1e 747 #define BMIC_LAST_FAILURE_DEFERRED_WRITE_ERROR 0x1f 748 #define BMIC_LAST_FAILURE_MISSING_IN_SAVE_RIS 0x20 749 #define BMIC_LAST_FAILURE_WRONG_REPLACE 0x21 750 #define BMIC_LAST_FAILURE_GDP_VPD_INQUIRY_FAILED 0x22 751 #define BMIC_LAST_FAILURE_GDP_MODE_SENSE_FAILED 0x23 752 #define BMIC_LAST_FAILURE_DRIVE_NOT_IN_48BIT_MODE 0x24 753 #define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_HOT_PLUG 0x25 754 #define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_LOAD_CFG 0x26 755 #define BMIC_LAST_FAILURE_PROTOCOL_ADAPTER_FAILED 0x27 756 #define BMIC_LAST_FAILURE_FAULTY_ID_BAY_EMPTY 0x28 757 #define BMIC_LAST_FAILURE_FAULTY_ID_BAY_OCCUPIED 0x29 758 #define BMIC_LAST_FAILURE_FAULTY_ID_INVALID_BAY 0x2a 759 #define BMIC_LAST_FAILURE_WRITE_RETRIES_FAILED 0x2b 760 761 #define BMIC_LAST_FAILURE_SMART_ERROR_REPORTED 0x37 762 #define BMIC_LAST_FAILURE_PHY_RESET_FAILED 0x38 763 #define BMIC_LAST_FAILURE_ONLY_ONE_CTLR_CAN_SEE_DRIVE 0x40 764 #define BMIC_LAST_FAILURE_KC_VOLUME_FAILED 0x41 765 #define BMIC_LAST_FAILURE_UNEXPECTED_REPLACEMENT 0x42 766 #define BMIC_LAST_FAILURE_OFFLINE_ERASE 0x80 767 #define BMIC_LAST_FAILURE_OFFLINE_TOO_SMALL 0x81 768 #define BMIC_LAST_FAILURE_OFFLINE_DRIVE_TYPE_MIX 0x82 769 #define BMIC_LAST_FAILURE_OFFLINE_ERASE_COMPLETE 0x83 770 771 u8 flags; 772 u8 more_flags; 773 u8 scsi_lun; /* SCSI LUN for phys drive */ 774 u8 yet_more_flags; 775 u8 even_more_flags; 776 __le32 spi_speed_rules;/* SPI Speed data:Ultra disable diagnose */ 777 u8 phys_connector[2]; /* connector number on controller */ 778 u8 phys_box_on_bus; /* phys enclosure this drive resides */ 779 u8 phys_bay_in_box; /* phys drv bay this drive resides */ 780 __le32 rpm; /* Drive rotational speed in rpm */ 781 u8 device_type; /* type of drive */ 782 u8 sata_version; /* only valid when drive_type is SATA */ 783 __le64 big_total_block_count; 784 __le64 ris_starting_lba; 785 __le32 ris_size; 786 u8 wwid[20]; 787 u8 controller_phy_map[32]; 788 __le16 phy_count; 789 u8 phy_connected_dev_type[256]; 790 u8 phy_to_drive_bay_num[256]; 791 __le16 phy_to_attached_dev_index[256]; 792 u8 box_index; 793 u8 reserved; 794 __le16 extra_physical_drive_flags; 795 #define BMIC_PHYS_DRIVE_SUPPORTS_GAS_GAUGE(idphydrv) \ 796 (idphydrv->extra_physical_drive_flags & (1 << 10)) 797 u8 negotiated_link_rate[256]; 798 u8 phy_to_phy_map[256]; 799 u8 redundant_path_present_map; 800 u8 redundant_path_failure_map; 801 u8 active_path_number; 802 __le16 alternate_paths_phys_connector[8]; 803 u8 alternate_paths_phys_box_on_port[8]; 804 u8 multi_lun_device_lun_count; 805 u8 minimum_good_fw_revision[8]; 806 u8 unique_inquiry_bytes[20]; 807 u8 current_temperature_degreesC; 808 u8 temperature_threshold_degreesC; 809 u8 max_temperature_degreesC; 810 u8 logical_blocks_per_phys_block_exp; /* phyblocksize = 512*2^exp */ 811 __le16 current_queue_depth_limit; 812 u8 reserved_switch_stuff[60]; 813 __le16 power_on_hours; /* valid only if gas gauge supported */ 814 __le16 percent_endurance_used; /* valid only if gas gauge supported. */ 815 #define BMIC_PHYS_DRIVE_SSD_WEAROUT(idphydrv) \ 816 ((idphydrv->percent_endurance_used & 0x80) || \ 817 (idphydrv->percent_endurance_used > 10000)) 818 u8 drive_authentication; 819 #define BMIC_PHYS_DRIVE_AUTHENTICATED(idphydrv) \ 820 (idphydrv->drive_authentication == 0x80) 821 u8 smart_carrier_authentication; 822 #define BMIC_SMART_CARRIER_AUTHENTICATION_SUPPORTED(idphydrv) \ 823 (idphydrv->smart_carrier_authentication != 0x0) 824 #define BMIC_SMART_CARRIER_AUTHENTICATED(idphydrv) \ 825 (idphydrv->smart_carrier_authentication == 0x01) 826 u8 smart_carrier_app_fw_version; 827 u8 smart_carrier_bootloader_fw_version; 828 u8 sanitize_support_flags; 829 u8 drive_key_flags; 830 u8 encryption_key_name[64]; 831 __le32 misc_drive_flags; 832 __le16 dek_index; 833 __le16 hba_drive_encryption_flags; 834 __le16 max_overwrite_time; 835 __le16 max_block_erase_time; 836 __le16 max_crypto_erase_time; 837 u8 device_connector_info[5]; 838 u8 connector_name[8][8]; 839 u8 page_83_id[16]; 840 u8 max_link_rate[256]; 841 u8 neg_phys_link_rate[256]; 842 u8 box_conn_name[8]; 843 } __attribute((aligned(512))); 844 845 struct bmic_sense_subsystem_info { 846 u8 primary_slot_number; 847 u8 reserved[3]; 848 u8 chasis_serial_number[32]; 849 u8 primary_world_wide_id[8]; 850 u8 primary_array_serial_number[32]; /* NULL terminated */ 851 u8 primary_cache_serial_number[32]; /* NULL terminated */ 852 u8 reserved_2[8]; 853 u8 secondary_array_serial_number[32]; 854 u8 secondary_cache_serial_number[32]; 855 u8 pad[332]; 856 }; 857 858 struct bmic_sense_storage_box_params { 859 u8 reserved[36]; 860 u8 inquiry_valid; 861 u8 reserved_1[68]; 862 u8 phys_box_on_port; 863 u8 reserved_2[22]; 864 u16 connection_info; 865 u8 reserver_3[84]; 866 u8 phys_connector[2]; 867 u8 reserved_4[296]; 868 }; 869 870 #pragma pack() 871 #endif /* HPSA_CMD_H */ 872