1 /* 2 * Disk Array driver for HP Smart Array SAS controllers 3 * Copyright 2016 Microsemi Corporation 4 * Copyright 2014-2015 PMC-Sierra, Inc. 5 * Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; version 2 of the License. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 14 * NON INFRINGEMENT. See the GNU General Public License for more details. 15 * 16 * Questions/Comments/Bugfixes to esc.storagedev@microsemi.com 17 * 18 */ 19 #ifndef HPSA_H 20 #define HPSA_H 21 22 #include <scsi/scsicam.h> 23 24 #define IO_OK 0 25 #define IO_ERROR 1 26 27 struct ctlr_info; 28 29 struct access_method { 30 void (*submit_command)(struct ctlr_info *h, 31 struct CommandList *c); 32 void (*set_intr_mask)(struct ctlr_info *h, unsigned long val); 33 bool (*intr_pending)(struct ctlr_info *h); 34 unsigned long (*command_completed)(struct ctlr_info *h, u8 q); 35 }; 36 37 /* for SAS hosts and SAS expanders */ 38 struct hpsa_sas_node { 39 struct device *parent_dev; 40 struct list_head port_list_head; 41 }; 42 43 struct hpsa_sas_port { 44 struct list_head port_list_entry; 45 u64 sas_address; 46 struct sas_port *port; 47 int next_phy_index; 48 struct list_head phy_list_head; 49 struct hpsa_sas_node *parent_node; 50 struct sas_rphy *rphy; 51 }; 52 53 struct hpsa_sas_phy { 54 struct list_head phy_list_entry; 55 struct sas_phy *phy; 56 struct hpsa_sas_port *parent_port; 57 bool added_to_port; 58 }; 59 60 struct hpsa_scsi_dev_t { 61 unsigned int devtype; 62 int bus, target, lun; /* as presented to the OS */ 63 unsigned char scsi3addr[8]; /* as presented to the HW */ 64 u8 physical_device : 1; 65 u8 expose_device; 66 #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" 67 unsigned char device_id[16]; /* from inquiry pg. 0x83 */ 68 u64 sas_address; 69 unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ 70 unsigned char model[16]; /* bytes 16-31 of inquiry data */ 71 unsigned char raid_level; /* from inquiry page 0xC1 */ 72 unsigned char volume_offline; /* discovered via TUR or VPD */ 73 u16 queue_depth; /* max queue_depth for this device */ 74 atomic_t reset_cmds_out; /* Count of commands to-be affected */ 75 atomic_t ioaccel_cmds_out; /* Only used for physical devices 76 * counts commands sent to physical 77 * device via "ioaccel" path. 78 */ 79 u32 ioaccel_handle; 80 u8 active_path_index; 81 u8 path_map; 82 u8 bay; 83 u8 box[8]; 84 u16 phys_connector[8]; 85 int offload_config; /* I/O accel RAID offload configured */ 86 int offload_enabled; /* I/O accel RAID offload enabled */ 87 int offload_to_be_enabled; 88 int hba_ioaccel_enabled; 89 int offload_to_mirror; /* Send next I/O accelerator RAID 90 * offload request to mirror drive 91 */ 92 struct raid_map_data raid_map; /* I/O accelerator RAID map */ 93 94 /* 95 * Pointers from logical drive map indices to the phys drives that 96 * make those logical drives. Note, multiple logical drives may 97 * share physical drives. You can have for instance 5 physical 98 * drives with 3 logical drives each using those same 5 physical 99 * disks. We need these pointers for counting i/o's out to physical 100 * devices in order to honor physical device queue depth limits. 101 */ 102 struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES]; 103 int nphysical_disks; 104 int supports_aborts; 105 struct hpsa_sas_port *sas_port; 106 int external; /* 1-from external array 0-not <0-unknown */ 107 }; 108 109 struct reply_queue_buffer { 110 u64 *head; 111 size_t size; 112 u8 wraparound; 113 u32 current_entry; 114 dma_addr_t busaddr; 115 }; 116 117 #pragma pack(1) 118 struct bmic_controller_parameters { 119 u8 led_flags; 120 u8 enable_command_list_verification; 121 u8 backed_out_write_drives; 122 u16 stripes_for_parity; 123 u8 parity_distribution_mode_flags; 124 u16 max_driver_requests; 125 u16 elevator_trend_count; 126 u8 disable_elevator; 127 u8 force_scan_complete; 128 u8 scsi_transfer_mode; 129 u8 force_narrow; 130 u8 rebuild_priority; 131 u8 expand_priority; 132 u8 host_sdb_asic_fix; 133 u8 pdpi_burst_from_host_disabled; 134 char software_name[64]; 135 char hardware_name[32]; 136 u8 bridge_revision; 137 u8 snapshot_priority; 138 u32 os_specific; 139 u8 post_prompt_timeout; 140 u8 automatic_drive_slamming; 141 u8 reserved1; 142 u8 nvram_flags; 143 u8 cache_nvram_flags; 144 u8 drive_config_flags; 145 u16 reserved2; 146 u8 temp_warning_level; 147 u8 temp_shutdown_level; 148 u8 temp_condition_reset; 149 u8 max_coalesce_commands; 150 u32 max_coalesce_delay; 151 u8 orca_password[4]; 152 u8 access_id[16]; 153 u8 reserved[356]; 154 }; 155 #pragma pack() 156 157 struct ctlr_info { 158 int ctlr; 159 char devname[8]; 160 char *product_name; 161 struct pci_dev *pdev; 162 u32 board_id; 163 u64 sas_address; 164 void __iomem *vaddr; 165 unsigned long paddr; 166 int nr_cmds; /* Number of commands allowed on this controller */ 167 #define HPSA_CMDS_RESERVED_FOR_ABORTS 2 168 #define HPSA_CMDS_RESERVED_FOR_DRIVER 1 169 struct CfgTable __iomem *cfgtable; 170 int interrupts_enabled; 171 int max_commands; 172 atomic_t commands_outstanding; 173 # define PERF_MODE_INT 0 174 # define DOORBELL_INT 1 175 # define SIMPLE_MODE_INT 2 176 # define MEMQ_MODE_INT 3 177 unsigned int intr[MAX_REPLY_QUEUES]; 178 unsigned int msix_vector; 179 unsigned int msi_vector; 180 int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */ 181 struct access_method access; 182 183 /* queue and queue Info */ 184 unsigned int Qdepth; 185 unsigned int maxSG; 186 spinlock_t lock; 187 int maxsgentries; 188 u8 max_cmd_sg_entries; 189 int chainsize; 190 struct SGDescriptor **cmd_sg_list; 191 struct ioaccel2_sg_element **ioaccel2_cmd_sg_list; 192 193 /* pointers to command and error info pool */ 194 struct CommandList *cmd_pool; 195 dma_addr_t cmd_pool_dhandle; 196 struct io_accel1_cmd *ioaccel_cmd_pool; 197 dma_addr_t ioaccel_cmd_pool_dhandle; 198 struct io_accel2_cmd *ioaccel2_cmd_pool; 199 dma_addr_t ioaccel2_cmd_pool_dhandle; 200 struct ErrorInfo *errinfo_pool; 201 dma_addr_t errinfo_pool_dhandle; 202 unsigned long *cmd_pool_bits; 203 int scan_finished; 204 spinlock_t scan_lock; 205 wait_queue_head_t scan_wait_queue; 206 207 struct Scsi_Host *scsi_host; 208 spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */ 209 int ndevices; /* number of used elements in .dev[] array. */ 210 struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES]; 211 /* 212 * Performant mode tables. 213 */ 214 u32 trans_support; 215 u32 trans_offset; 216 struct TransTable_struct __iomem *transtable; 217 unsigned long transMethod; 218 219 /* cap concurrent passthrus at some reasonable maximum */ 220 #define HPSA_MAX_CONCURRENT_PASSTHRUS (10) 221 atomic_t passthru_cmds_avail; 222 223 /* 224 * Performant mode completion buffers 225 */ 226 size_t reply_queue_size; 227 struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES]; 228 u8 nreply_queues; 229 u32 *blockFetchTable; 230 u32 *ioaccel1_blockFetchTable; 231 u32 *ioaccel2_blockFetchTable; 232 u32 __iomem *ioaccel2_bft2_regs; 233 unsigned char *hba_inquiry_data; 234 u32 driver_support; 235 u32 fw_support; 236 int ioaccel_support; 237 int ioaccel_maxsg; 238 u64 last_intr_timestamp; 239 u32 last_heartbeat; 240 u64 last_heartbeat_timestamp; 241 u32 heartbeat_sample_interval; 242 atomic_t firmware_flash_in_progress; 243 u32 __percpu *lockup_detected; 244 struct delayed_work monitor_ctlr_work; 245 struct delayed_work rescan_ctlr_work; 246 int remove_in_progress; 247 /* Address of h->q[x] is passed to intr handler to know which queue */ 248 u8 q[MAX_REPLY_QUEUES]; 249 char intrname[MAX_REPLY_QUEUES][16]; /* "hpsa0-msix00" names */ 250 u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */ 251 #define HPSATMF_BITS_SUPPORTED (1 << 0) 252 #define HPSATMF_PHYS_LUN_RESET (1 << 1) 253 #define HPSATMF_PHYS_NEX_RESET (1 << 2) 254 #define HPSATMF_PHYS_TASK_ABORT (1 << 3) 255 #define HPSATMF_PHYS_TSET_ABORT (1 << 4) 256 #define HPSATMF_PHYS_CLEAR_ACA (1 << 5) 257 #define HPSATMF_PHYS_CLEAR_TSET (1 << 6) 258 #define HPSATMF_PHYS_QRY_TASK (1 << 7) 259 #define HPSATMF_PHYS_QRY_TSET (1 << 8) 260 #define HPSATMF_PHYS_QRY_ASYNC (1 << 9) 261 #define HPSATMF_IOACCEL_ENABLED (1 << 15) 262 #define HPSATMF_MASK_SUPPORTED (1 << 16) 263 #define HPSATMF_LOG_LUN_RESET (1 << 17) 264 #define HPSATMF_LOG_NEX_RESET (1 << 18) 265 #define HPSATMF_LOG_TASK_ABORT (1 << 19) 266 #define HPSATMF_LOG_TSET_ABORT (1 << 20) 267 #define HPSATMF_LOG_CLEAR_ACA (1 << 21) 268 #define HPSATMF_LOG_CLEAR_TSET (1 << 22) 269 #define HPSATMF_LOG_QRY_TASK (1 << 23) 270 #define HPSATMF_LOG_QRY_TSET (1 << 24) 271 #define HPSATMF_LOG_QRY_ASYNC (1 << 25) 272 u32 events; 273 #define CTLR_STATE_CHANGE_EVENT (1 << 0) 274 #define CTLR_ENCLOSURE_HOT_PLUG_EVENT (1 << 1) 275 #define CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV (1 << 4) 276 #define CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV (1 << 5) 277 #define CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL (1 << 6) 278 #define CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED (1 << 30) 279 #define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE (1 << 31) 280 281 #define RESCAN_REQUIRED_EVENT_BITS \ 282 (CTLR_ENCLOSURE_HOT_PLUG_EVENT | \ 283 CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \ 284 CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \ 285 CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \ 286 CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE) 287 spinlock_t offline_device_lock; 288 struct list_head offline_device_list; 289 int acciopath_status; 290 int drv_req_rescan; 291 int raid_offload_debug; 292 int discovery_polling; 293 struct ReportLUNdata *lastlogicals; 294 int needs_abort_tags_swizzled; 295 struct workqueue_struct *resubmit_wq; 296 struct workqueue_struct *rescan_ctlr_wq; 297 atomic_t abort_cmds_available; 298 wait_queue_head_t abort_cmd_wait_queue; 299 wait_queue_head_t event_sync_wait_queue; 300 struct mutex reset_mutex; 301 u8 reset_in_progress; 302 struct hpsa_sas_node *sas_host; 303 }; 304 305 struct offline_device_entry { 306 unsigned char scsi3addr[8]; 307 struct list_head offline_list; 308 }; 309 310 #define HPSA_ABORT_MSG 0 311 #define HPSA_DEVICE_RESET_MSG 1 312 #define HPSA_RESET_TYPE_CONTROLLER 0x00 313 #define HPSA_RESET_TYPE_BUS 0x01 314 #define HPSA_RESET_TYPE_TARGET 0x03 315 #define HPSA_RESET_TYPE_LUN 0x04 316 #define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */ 317 #define HPSA_MSG_SEND_RETRY_LIMIT 10 318 #define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000) 319 320 /* Maximum time in seconds driver will wait for command completions 321 * when polling before giving up. 322 */ 323 #define HPSA_MAX_POLL_TIME_SECS (20) 324 325 /* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines 326 * how many times to retry TEST UNIT READY on a device 327 * while waiting for it to become ready before giving up. 328 * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval 329 * between sending TURs while waiting for a device 330 * to become ready. 331 */ 332 #define HPSA_TUR_RETRY_LIMIT (20) 333 #define HPSA_MAX_WAIT_INTERVAL_SECS (30) 334 335 /* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board 336 * to become ready, in seconds, before giving up on it. 337 * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait 338 * between polling the board to see if it is ready, in 339 * milliseconds. HPSA_BOARD_READY_POLL_INTERVAL and 340 * HPSA_BOARD_READY_ITERATIONS are derived from those. 341 */ 342 #define HPSA_BOARD_READY_WAIT_SECS (120) 343 #define HPSA_BOARD_NOT_READY_WAIT_SECS (100) 344 #define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100) 345 #define HPSA_BOARD_READY_POLL_INTERVAL \ 346 ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000) 347 #define HPSA_BOARD_READY_ITERATIONS \ 348 ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \ 349 HPSA_BOARD_READY_POLL_INTERVAL_MSECS) 350 #define HPSA_BOARD_NOT_READY_ITERATIONS \ 351 ((HPSA_BOARD_NOT_READY_WAIT_SECS * 1000) / \ 352 HPSA_BOARD_READY_POLL_INTERVAL_MSECS) 353 #define HPSA_POST_RESET_PAUSE_MSECS (3000) 354 #define HPSA_POST_RESET_NOOP_RETRIES (12) 355 356 /* Defining the diffent access_menthods */ 357 /* 358 * Memory mapped FIFO interface (SMART 53xx cards) 359 */ 360 #define SA5_DOORBELL 0x20 361 #define SA5_REQUEST_PORT_OFFSET 0x40 362 #define SA5_REQUEST_PORT64_LO_OFFSET 0xC0 363 #define SA5_REQUEST_PORT64_HI_OFFSET 0xC4 364 #define SA5_REPLY_INTR_MASK_OFFSET 0x34 365 #define SA5_REPLY_PORT_OFFSET 0x44 366 #define SA5_INTR_STATUS 0x30 367 #define SA5_SCRATCHPAD_OFFSET 0xB0 368 369 #define SA5_CTCFG_OFFSET 0xB4 370 #define SA5_CTMEM_OFFSET 0xB8 371 372 #define SA5_INTR_OFF 0x08 373 #define SA5B_INTR_OFF 0x04 374 #define SA5_INTR_PENDING 0x08 375 #define SA5B_INTR_PENDING 0x04 376 #define FIFO_EMPTY 0xffffffff 377 #define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */ 378 379 #define HPSA_ERROR_BIT 0x02 380 381 /* Performant mode flags */ 382 #define SA5_PERF_INTR_PENDING 0x04 383 #define SA5_PERF_INTR_OFF 0x05 384 #define SA5_OUTDB_STATUS_PERF_BIT 0x01 385 #define SA5_OUTDB_CLEAR_PERF_BIT 0x01 386 #define SA5_OUTDB_CLEAR 0xA0 387 #define SA5_OUTDB_CLEAR_PERF_BIT 0x01 388 #define SA5_OUTDB_STATUS 0x9C 389 390 391 #define HPSA_INTR_ON 1 392 #define HPSA_INTR_OFF 0 393 394 /* 395 * Inbound Post Queue offsets for IO Accelerator Mode 2 396 */ 397 #define IOACCEL2_INBOUND_POSTQ_32 0x48 398 #define IOACCEL2_INBOUND_POSTQ_64_LOW 0xd0 399 #define IOACCEL2_INBOUND_POSTQ_64_HI 0xd4 400 401 #define HPSA_PHYSICAL_DEVICE_BUS 0 402 #define HPSA_RAID_VOLUME_BUS 1 403 #define HPSA_EXTERNAL_RAID_VOLUME_BUS 2 404 #define HPSA_HBA_BUS 0 405 406 /* 407 Send the command to the hardware 408 */ 409 static void SA5_submit_command(struct ctlr_info *h, 410 struct CommandList *c) 411 { 412 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); 413 (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); 414 } 415 416 static void SA5_submit_command_no_read(struct ctlr_info *h, 417 struct CommandList *c) 418 { 419 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); 420 } 421 422 static void SA5_submit_command_ioaccel2(struct ctlr_info *h, 423 struct CommandList *c) 424 { 425 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); 426 } 427 428 /* 429 * This card is the opposite of the other cards. 430 * 0 turns interrupts on... 431 * 0x08 turns them off... 432 */ 433 static void SA5_intr_mask(struct ctlr_info *h, unsigned long val) 434 { 435 if (val) { /* Turn interrupts on */ 436 h->interrupts_enabled = 1; 437 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); 438 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); 439 } else { /* Turn them off */ 440 h->interrupts_enabled = 0; 441 writel(SA5_INTR_OFF, 442 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); 443 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); 444 } 445 } 446 447 static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val) 448 { 449 if (val) { /* turn on interrupts */ 450 h->interrupts_enabled = 1; 451 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); 452 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); 453 } else { 454 h->interrupts_enabled = 0; 455 writel(SA5_PERF_INTR_OFF, 456 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); 457 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); 458 } 459 } 460 461 static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q) 462 { 463 struct reply_queue_buffer *rq = &h->reply_queue[q]; 464 unsigned long register_value = FIFO_EMPTY; 465 466 /* msi auto clears the interrupt pending bit. */ 467 if (unlikely(!(h->msi_vector || h->msix_vector))) { 468 /* flush the controller write of the reply queue by reading 469 * outbound doorbell status register. 470 */ 471 (void) readl(h->vaddr + SA5_OUTDB_STATUS); 472 writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR); 473 /* Do a read in order to flush the write to the controller 474 * (as per spec.) 475 */ 476 (void) readl(h->vaddr + SA5_OUTDB_STATUS); 477 } 478 479 if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) { 480 register_value = rq->head[rq->current_entry]; 481 rq->current_entry++; 482 atomic_dec(&h->commands_outstanding); 483 } else { 484 register_value = FIFO_EMPTY; 485 } 486 /* Check for wraparound */ 487 if (rq->current_entry == h->max_commands) { 488 rq->current_entry = 0; 489 rq->wraparound ^= 1; 490 } 491 return register_value; 492 } 493 494 /* 495 * returns value read from hardware. 496 * returns FIFO_EMPTY if there is nothing to read 497 */ 498 static unsigned long SA5_completed(struct ctlr_info *h, 499 __attribute__((unused)) u8 q) 500 { 501 unsigned long register_value 502 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET); 503 504 if (register_value != FIFO_EMPTY) 505 atomic_dec(&h->commands_outstanding); 506 507 #ifdef HPSA_DEBUG 508 if (register_value != FIFO_EMPTY) 509 dev_dbg(&h->pdev->dev, "Read %lx back from board\n", 510 register_value); 511 else 512 dev_dbg(&h->pdev->dev, "FIFO Empty read\n"); 513 #endif 514 515 return register_value; 516 } 517 /* 518 * Returns true if an interrupt is pending.. 519 */ 520 static bool SA5_intr_pending(struct ctlr_info *h) 521 { 522 unsigned long register_value = 523 readl(h->vaddr + SA5_INTR_STATUS); 524 return register_value & SA5_INTR_PENDING; 525 } 526 527 static bool SA5_performant_intr_pending(struct ctlr_info *h) 528 { 529 unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); 530 531 if (!register_value) 532 return false; 533 534 /* Read outbound doorbell to flush */ 535 register_value = readl(h->vaddr + SA5_OUTDB_STATUS); 536 return register_value & SA5_OUTDB_STATUS_PERF_BIT; 537 } 538 539 #define SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT 0x100 540 541 static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h) 542 { 543 unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); 544 545 return (register_value & SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT) ? 546 true : false; 547 } 548 549 #define IOACCEL_MODE1_REPLY_QUEUE_INDEX 0x1A0 550 #define IOACCEL_MODE1_PRODUCER_INDEX 0x1B8 551 #define IOACCEL_MODE1_CONSUMER_INDEX 0x1BC 552 #define IOACCEL_MODE1_REPLY_UNUSED 0xFFFFFFFFFFFFFFFFULL 553 554 static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q) 555 { 556 u64 register_value; 557 struct reply_queue_buffer *rq = &h->reply_queue[q]; 558 559 BUG_ON(q >= h->nreply_queues); 560 561 register_value = rq->head[rq->current_entry]; 562 if (register_value != IOACCEL_MODE1_REPLY_UNUSED) { 563 rq->head[rq->current_entry] = IOACCEL_MODE1_REPLY_UNUSED; 564 if (++rq->current_entry == rq->size) 565 rq->current_entry = 0; 566 /* 567 * @todo 568 * 569 * Don't really need to write the new index after each command, 570 * but with current driver design this is easiest. 571 */ 572 wmb(); 573 writel((q << 24) | rq->current_entry, h->vaddr + 574 IOACCEL_MODE1_CONSUMER_INDEX); 575 atomic_dec(&h->commands_outstanding); 576 } 577 return (unsigned long) register_value; 578 } 579 580 static struct access_method SA5_access = { 581 SA5_submit_command, 582 SA5_intr_mask, 583 SA5_intr_pending, 584 SA5_completed, 585 }; 586 587 static struct access_method SA5_ioaccel_mode1_access = { 588 SA5_submit_command, 589 SA5_performant_intr_mask, 590 SA5_ioaccel_mode1_intr_pending, 591 SA5_ioaccel_mode1_completed, 592 }; 593 594 static struct access_method SA5_ioaccel_mode2_access = { 595 SA5_submit_command_ioaccel2, 596 SA5_performant_intr_mask, 597 SA5_performant_intr_pending, 598 SA5_performant_completed, 599 }; 600 601 static struct access_method SA5_performant_access = { 602 SA5_submit_command, 603 SA5_performant_intr_mask, 604 SA5_performant_intr_pending, 605 SA5_performant_completed, 606 }; 607 608 static struct access_method SA5_performant_access_no_read = { 609 SA5_submit_command_no_read, 610 SA5_performant_intr_mask, 611 SA5_performant_intr_pending, 612 SA5_performant_completed, 613 }; 614 615 struct board_type { 616 u32 board_id; 617 char *product_name; 618 struct access_method *access; 619 }; 620 621 #endif /* HPSA_H */ 622 623