xref: /linux/drivers/scsi/aic7xxx/aic79xx_osm.c (revision fb72014d98afd51e85aab9c061344ef32d615606)
1 /*
2  * Adaptec AIC79xx device driver for Linux.
3  *
4  * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
5  *
6  * --------------------------------------------------------------------------
7  * Copyright (c) 1994-2000 Justin T. Gibbs.
8  * Copyright (c) 1997-1999 Doug Ledford
9  * Copyright (c) 2000-2003 Adaptec Inc.
10  * All rights reserved.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions, and the following disclaimer,
17  *    without modification.
18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19  *    substantially similar to the "NO WARRANTY" disclaimer below
20  *    ("Disclaimer") and any redistribution must be conditioned upon
21  *    including a substantially similar Disclaimer requirement for further
22  *    binary redistribution.
23  * 3. Neither the names of the above-listed copyright holders nor the names
24  *    of any contributors may be used to endorse or promote products derived
25  *    from this software without specific prior written permission.
26  *
27  * Alternatively, this software may be distributed under the terms of the
28  * GNU General Public License ("GPL") version 2 as published by the Free
29  * Software Foundation.
30  *
31  * NO WARRANTY
32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42  * POSSIBILITY OF SUCH DAMAGES.
43  */
44 
45 #include "aic79xx_osm.h"
46 #include "aic79xx_inline.h"
47 #include <scsi/scsicam.h>
48 
49 static struct scsi_transport_template *ahd_linux_transport_template = NULL;
50 
51 #include <linux/init.h>		/* __setup */
52 #include <linux/mm.h>		/* For fetching system memory size */
53 #include <linux/blkdev.h>		/* For block_size() */
54 #include <linux/delay.h>	/* For ssleep/msleep */
55 #include <linux/device.h>
56 #include <linux/slab.h>
57 
58 /*
59  * Bucket size for counting good commands in between bad ones.
60  */
61 #define AHD_LINUX_ERR_THRESH	1000
62 
63 /*
64  * Set this to the delay in seconds after SCSI bus reset.
65  * Note, we honor this only for the initial bus reset.
66  * The scsi error recovery code performs its own bus settle
67  * delay handling for error recovery actions.
68  */
69 #ifdef CONFIG_AIC79XX_RESET_DELAY_MS
70 #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
71 #else
72 #define AIC79XX_RESET_DELAY 5000
73 #endif
74 
75 /*
76  * To change the default number of tagged transactions allowed per-device,
77  * add a line to the lilo.conf file like:
78  * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
79  * which will result in the first four devices on the first two
80  * controllers being set to a tagged queue depth of 32.
81  *
82  * The tag_commands is an array of 16 to allow for wide and twin adapters.
83  * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
84  * for channel 1.
85  */
86 typedef struct {
87 	uint16_t tag_commands[16];	/* Allow for wide/twin adapters. */
88 } adapter_tag_info_t;
89 
90 /*
91  * Modify this as you see fit for your system.
92  *
93  * 0			tagged queuing disabled
94  * 1 <= n <= 253	n == max tags ever dispatched.
95  *
96  * The driver will throttle the number of commands dispatched to a
97  * device if it returns queue full.  For devices with a fixed maximum
98  * queue depth, the driver will eventually determine this depth and
99  * lock it in (a console message is printed to indicate that a lock
100  * has occurred).  On some devices, queue full is returned for a temporary
101  * resource shortage.  These devices will return queue full at varying
102  * depths.  The driver will throttle back when the queue fulls occur and
103  * attempt to slowly increase the depth over time as the device recovers
104  * from the resource shortage.
105  *
106  * In this example, the first line will disable tagged queueing for all
107  * the devices on the first probed aic79xx adapter.
108  *
109  * The second line enables tagged queueing with 4 commands/LUN for IDs
110  * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
111  * driver to attempt to use up to 64 tags for ID 1.
112  *
113  * The third line is the same as the first line.
114  *
115  * The fourth line disables tagged queueing for devices 0 and 3.  It
116  * enables tagged queueing for the other IDs, with 16 commands/LUN
117  * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
118  * IDs 2, 5-7, and 9-15.
119  */
120 
121 /*
122  * NOTE: The below structure is for reference only, the actual structure
123  *       to modify in order to change things is just below this comment block.
124 adapter_tag_info_t aic79xx_tag_info[] =
125 {
126 	{{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
127 	{{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
128 	{{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
129 	{{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
130 };
131 */
132 
133 #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
134 #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
135 #else
136 #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
137 #endif
138 
139 #define AIC79XX_CONFIGED_TAG_COMMANDS {					\
140 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
141 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
142 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
143 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
144 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
145 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
146 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\
147 	AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE		\
148 }
149 
150 /*
151  * By default, use the number of commands specified by
152  * the users kernel configuration.
153  */
154 static adapter_tag_info_t aic79xx_tag_info[] =
155 {
156 	{AIC79XX_CONFIGED_TAG_COMMANDS},
157 	{AIC79XX_CONFIGED_TAG_COMMANDS},
158 	{AIC79XX_CONFIGED_TAG_COMMANDS},
159 	{AIC79XX_CONFIGED_TAG_COMMANDS},
160 	{AIC79XX_CONFIGED_TAG_COMMANDS},
161 	{AIC79XX_CONFIGED_TAG_COMMANDS},
162 	{AIC79XX_CONFIGED_TAG_COMMANDS},
163 	{AIC79XX_CONFIGED_TAG_COMMANDS},
164 	{AIC79XX_CONFIGED_TAG_COMMANDS},
165 	{AIC79XX_CONFIGED_TAG_COMMANDS},
166 	{AIC79XX_CONFIGED_TAG_COMMANDS},
167 	{AIC79XX_CONFIGED_TAG_COMMANDS},
168 	{AIC79XX_CONFIGED_TAG_COMMANDS},
169 	{AIC79XX_CONFIGED_TAG_COMMANDS},
170 	{AIC79XX_CONFIGED_TAG_COMMANDS},
171 	{AIC79XX_CONFIGED_TAG_COMMANDS}
172 };
173 
174 /*
175  * The I/O cell on the chip is very configurable in respect to its analog
176  * characteristics.  Set the defaults here; they can be overriden with
177  * the proper insmod parameters.
178  */
179 struct ahd_linux_iocell_opts
180 {
181 	uint8_t	precomp;
182 	uint8_t	slewrate;
183 	uint8_t amplitude;
184 };
185 #define AIC79XX_DEFAULT_PRECOMP		0xFF
186 #define AIC79XX_DEFAULT_SLEWRATE	0xFF
187 #define AIC79XX_DEFAULT_AMPLITUDE	0xFF
188 #define AIC79XX_DEFAULT_IOOPTS			\
189 {						\
190 	AIC79XX_DEFAULT_PRECOMP,		\
191 	AIC79XX_DEFAULT_SLEWRATE,		\
192 	AIC79XX_DEFAULT_AMPLITUDE		\
193 }
194 #define AIC79XX_PRECOMP_INDEX	0
195 #define AIC79XX_SLEWRATE_INDEX	1
196 #define AIC79XX_AMPLITUDE_INDEX	2
197 static const struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
198 {
199 	AIC79XX_DEFAULT_IOOPTS,
200 	AIC79XX_DEFAULT_IOOPTS,
201 	AIC79XX_DEFAULT_IOOPTS,
202 	AIC79XX_DEFAULT_IOOPTS,
203 	AIC79XX_DEFAULT_IOOPTS,
204 	AIC79XX_DEFAULT_IOOPTS,
205 	AIC79XX_DEFAULT_IOOPTS,
206 	AIC79XX_DEFAULT_IOOPTS,
207 	AIC79XX_DEFAULT_IOOPTS,
208 	AIC79XX_DEFAULT_IOOPTS,
209 	AIC79XX_DEFAULT_IOOPTS,
210 	AIC79XX_DEFAULT_IOOPTS,
211 	AIC79XX_DEFAULT_IOOPTS,
212 	AIC79XX_DEFAULT_IOOPTS,
213 	AIC79XX_DEFAULT_IOOPTS,
214 	AIC79XX_DEFAULT_IOOPTS
215 };
216 
217 /*
218  * There should be a specific return value for this in scsi.h, but
219  * it seems that most drivers ignore it.
220  */
221 #define DID_UNDERFLOW   DID_ERROR
222 
223 void
224 ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
225 {
226 	printk("(scsi%d:%c:%d:%d): ",
227 	       ahd->platform_data->host->host_no,
228 	       scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
229 	       scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
230 	       scb != NULL ? SCB_GET_LUN(scb) : -1);
231 }
232 
233 /*
234  * XXX - these options apply unilaterally to _all_ adapters
235  *       cards in the system.  This should be fixed.  Exceptions to this
236  *       rule are noted in the comments.
237  */
238 
239 /*
240  * Skip the scsi bus reset.  Non 0 make us skip the reset at startup.  This
241  * has no effect on any later resets that might occur due to things like
242  * SCSI bus timeouts.
243  */
244 static uint32_t aic79xx_no_reset;
245 
246 /*
247  * Should we force EXTENDED translation on a controller.
248  *     0 == Use whatever is in the SEEPROM or default to off
249  *     1 == Use whatever is in the SEEPROM or default to on
250  */
251 static uint32_t aic79xx_extended;
252 
253 /*
254  * PCI bus parity checking of the Adaptec controllers.  This is somewhat
255  * dubious at best.  To my knowledge, this option has never actually
256  * solved a PCI parity problem, but on certain machines with broken PCI
257  * chipset configurations, it can generate tons of false error messages.
258  * It's included in the driver for completeness.
259  *   0	   = Shut off PCI parity check
260  *   non-0 = Enable PCI parity check
261  *
262  * NOTE: you can't actually pass -1 on the lilo prompt.  So, to set this
263  * variable to -1 you would actually want to simply pass the variable
264  * name without a number.  That will invert the 0 which will result in
265  * -1.
266  */
267 static uint32_t aic79xx_pci_parity = ~0;
268 
269 /*
270  * There are lots of broken chipsets in the world.  Some of them will
271  * violate the PCI spec when we issue byte sized memory writes to our
272  * controller.  I/O mapped register access, if allowed by the given
273  * platform, will work in almost all cases.
274  */
275 uint32_t aic79xx_allow_memio = ~0;
276 
277 /*
278  * So that we can set how long each device is given as a selection timeout.
279  * The table of values goes like this:
280  *   0 - 256ms
281  *   1 - 128ms
282  *   2 - 64ms
283  *   3 - 32ms
284  * We default to 256ms because some older devices need a longer time
285  * to respond to initial selection.
286  */
287 static uint32_t aic79xx_seltime;
288 
289 /*
290  * Certain devices do not perform any aging on commands.  Should the
291  * device be saturated by commands in one portion of the disk, it is
292  * possible for transactions on far away sectors to never be serviced.
293  * To handle these devices, we can periodically send an ordered tag to
294  * force all outstanding transactions to be serviced prior to a new
295  * transaction.
296  */
297 static uint32_t aic79xx_periodic_otag;
298 
299 /* Some storage boxes are using an LSI chip which has a bug making it
300  * impossible to use aic79xx Rev B chip in 320 speeds.  The following
301  * storage boxes have been reported to be buggy:
302  * EonStor 3U 16-Bay: U16U-G3A3
303  * EonStor 2U 12-Bay: U12U-G3A3
304  * SentinelRAID: 2500F R5 / R6
305  * SentinelRAID: 2500F R1
306  * SentinelRAID: 2500F/1500F
307  * SentinelRAID: 150F
308  *
309  * To get around this LSI bug, you can set your board to 160 mode
310  * or you can enable the SLOWCRC bit.
311  */
312 uint32_t aic79xx_slowcrc;
313 
314 /*
315  * Module information and settable options.
316  */
317 static char *aic79xx = NULL;
318 
319 MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
320 MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver");
321 MODULE_LICENSE("Dual BSD/GPL");
322 MODULE_VERSION(AIC79XX_DRIVER_VERSION);
323 module_param(aic79xx, charp, 0444);
324 MODULE_PARM_DESC(aic79xx,
325 "period-delimited options string:\n"
326 "	verbose			Enable verbose/diagnostic logging\n"
327 "	allow_memio		Allow device registers to be memory mapped\n"
328 "	debug			Bitmask of debug values to enable\n"
329 "	no_reset		Suppress initial bus resets\n"
330 "	extended		Enable extended geometry on all controllers\n"
331 "	periodic_otag		Send an ordered tagged transaction\n"
332 "				periodically to prevent tag starvation.\n"
333 "				This may be required by some older disk\n"
334 "				or drives/RAID arrays.\n"
335 "	tag_info:<tag_str>	Set per-target tag depth\n"
336 "	global_tag_depth:<int>	Global tag depth for all targets on all buses\n"
337 "	slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
338 "	precomp:<pcomp_list>	Set the signal precompensation (0-7).\n"
339 "	amplitude:<int>		Set the signal amplitude (0-7).\n"
340 "	seltime:<int>		Selection Timeout:\n"
341 "				(0/256ms,1/128ms,2/64ms,3/32ms)\n"
342 "	slowcrc			Turn on the SLOWCRC bit (Rev B only)\n"
343 "\n"
344 "	Sample /etc/modprobe.conf line:\n"
345 "		Enable verbose logging\n"
346 "		Set tag depth on Controller 2/Target 2 to 10 tags\n"
347 "		Shorten the selection timeout to 128ms\n"
348 "\n"
349 "	options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
350 );
351 
352 static void ahd_linux_handle_scsi_status(struct ahd_softc *,
353 					 struct scsi_device *,
354 					 struct scb *);
355 static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
356 					 struct scsi_cmnd *cmd);
357 static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
358 static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
359 static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
360 				     struct ahd_devinfo *devinfo);
361 static void ahd_linux_device_queue_depth(struct scsi_device *);
362 static int ahd_linux_run_command(struct ahd_softc*,
363 				 struct ahd_linux_device *,
364 				 struct scsi_cmnd *);
365 static void ahd_linux_setup_tag_info_global(char *p);
366 static int  aic79xx_setup(char *c);
367 static void ahd_freeze_simq(struct ahd_softc *ahd);
368 static void ahd_release_simq(struct ahd_softc *ahd);
369 
370 static int ahd_linux_unit;
371 
372 
373 /************************** OS Utility Wrappers *******************************/
374 void ahd_delay(long);
375 void
376 ahd_delay(long usec)
377 {
378 	/*
379 	 * udelay on Linux can have problems for
380 	 * multi-millisecond waits.  Wait at most
381 	 * 1024us per call.
382 	 */
383 	while (usec > 0) {
384 		udelay(usec % 1024);
385 		usec -= 1024;
386 	}
387 }
388 
389 
390 /***************************** Low Level I/O **********************************/
391 uint8_t ahd_inb(struct ahd_softc * ahd, long port);
392 void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
393 void ahd_outw_atomic(struct ahd_softc * ahd,
394 				     long port, uint16_t val);
395 void ahd_outsb(struct ahd_softc * ahd, long port,
396 			       uint8_t *, int count);
397 void ahd_insb(struct ahd_softc * ahd, long port,
398 			       uint8_t *, int count);
399 
400 uint8_t
401 ahd_inb(struct ahd_softc * ahd, long port)
402 {
403 	uint8_t x;
404 
405 	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
406 		x = readb(ahd->bshs[0].maddr + port);
407 	} else {
408 		x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
409 	}
410 	mb();
411 	return (x);
412 }
413 
414 #if 0 /* unused */
415 static uint16_t
416 ahd_inw_atomic(struct ahd_softc * ahd, long port)
417 {
418 	uint8_t x;
419 
420 	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
421 		x = readw(ahd->bshs[0].maddr + port);
422 	} else {
423 		x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
424 	}
425 	mb();
426 	return (x);
427 }
428 #endif
429 
430 void
431 ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
432 {
433 	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
434 		writeb(val, ahd->bshs[0].maddr + port);
435 	} else {
436 		outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
437 	}
438 	mb();
439 }
440 
441 void
442 ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
443 {
444 	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
445 		writew(val, ahd->bshs[0].maddr + port);
446 	} else {
447 		outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
448 	}
449 	mb();
450 }
451 
452 void
453 ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
454 {
455 	int i;
456 
457 	/*
458 	 * There is probably a more efficient way to do this on Linux
459 	 * but we don't use this for anything speed critical and this
460 	 * should work.
461 	 */
462 	for (i = 0; i < count; i++)
463 		ahd_outb(ahd, port, *array++);
464 }
465 
466 void
467 ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
468 {
469 	int i;
470 
471 	/*
472 	 * There is probably a more efficient way to do this on Linux
473 	 * but we don't use this for anything speed critical and this
474 	 * should work.
475 	 */
476 	for (i = 0; i < count; i++)
477 		*array++ = ahd_inb(ahd, port);
478 }
479 
480 /******************************* PCI Routines *********************************/
481 uint32_t
482 ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
483 {
484 	switch (width) {
485 	case 1:
486 	{
487 		uint8_t retval;
488 
489 		pci_read_config_byte(pci, reg, &retval);
490 		return (retval);
491 	}
492 	case 2:
493 	{
494 		uint16_t retval;
495 		pci_read_config_word(pci, reg, &retval);
496 		return (retval);
497 	}
498 	case 4:
499 	{
500 		uint32_t retval;
501 		pci_read_config_dword(pci, reg, &retval);
502 		return (retval);
503 	}
504 	default:
505 		panic("ahd_pci_read_config: Read size too big");
506 		/* NOTREACHED */
507 		return (0);
508 	}
509 }
510 
511 void
512 ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
513 {
514 	switch (width) {
515 	case 1:
516 		pci_write_config_byte(pci, reg, value);
517 		break;
518 	case 2:
519 		pci_write_config_word(pci, reg, value);
520 		break;
521 	case 4:
522 		pci_write_config_dword(pci, reg, value);
523 		break;
524 	default:
525 		panic("ahd_pci_write_config: Write size too big");
526 		/* NOTREACHED */
527 	}
528 }
529 
530 /****************************** Inlines ***************************************/
531 static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
532 
533 static void
534 ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
535 {
536 	struct scsi_cmnd *cmd;
537 
538 	cmd = scb->io_ctx;
539 	ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
540 	scsi_dma_unmap(cmd);
541 }
542 
543 /******************************** Macros **************************************/
544 #define BUILD_SCSIID(ahd, cmd)						\
545 	(((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id)
546 
547 /*
548  * Return a string describing the driver.
549  */
550 static const char *
551 ahd_linux_info(struct Scsi_Host *host)
552 {
553 	static char buffer[512];
554 	char	ahd_info[256];
555 	char   *bp;
556 	struct ahd_softc *ahd;
557 
558 	bp = &buffer[0];
559 	ahd = *(struct ahd_softc **)host->hostdata;
560 	memset(bp, 0, sizeof(buffer));
561 	strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION "\n"
562 			"        <");
563 	strcat(bp, ahd->description);
564 	strcat(bp, ">\n"
565 			"        ");
566 	ahd_controller_info(ahd, ahd_info);
567 	strcat(bp, ahd_info);
568 
569 	return (bp);
570 }
571 
572 /*
573  * Queue an SCB to the controller.
574  */
575 static int
576 ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
577 {
578 	struct	 ahd_softc *ahd;
579 	struct	 ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
580 	int rtn = SCSI_MLQUEUE_HOST_BUSY;
581 
582 	ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
583 
584 	cmd->scsi_done = scsi_done;
585 	cmd->result = CAM_REQ_INPROG << 16;
586 	rtn = ahd_linux_run_command(ahd, dev, cmd);
587 
588 	return rtn;
589 }
590 
591 static struct scsi_target **
592 ahd_linux_target_in_softc(struct scsi_target *starget)
593 {
594 	struct	ahd_softc *ahd =
595 		*((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
596 	unsigned int target_offset;
597 
598 	target_offset = starget->id;
599 	if (starget->channel != 0)
600 		target_offset += 8;
601 
602 	return &ahd->platform_data->starget[target_offset];
603 }
604 
605 static int
606 ahd_linux_target_alloc(struct scsi_target *starget)
607 {
608 	struct	ahd_softc *ahd =
609 		*((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
610 	struct seeprom_config *sc = ahd->seep_config;
611 	unsigned long flags;
612 	struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
613 	struct ahd_devinfo devinfo;
614 	struct ahd_initiator_tinfo *tinfo;
615 	struct ahd_tmode_tstate *tstate;
616 	char channel = starget->channel + 'A';
617 
618 	ahd_lock(ahd, &flags);
619 
620 	BUG_ON(*ahd_targp != NULL);
621 
622 	*ahd_targp = starget;
623 
624 	if (sc) {
625 		int flags = sc->device_flags[starget->id];
626 
627 		tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
628 					    starget->id, &tstate);
629 
630 		if ((flags  & CFPACKETIZED) == 0) {
631 			/* don't negotiate packetized (IU) transfers */
632 			spi_max_iu(starget) = 0;
633 		} else {
634 			if ((ahd->features & AHD_RTI) == 0)
635 				spi_rti(starget) = 0;
636 		}
637 
638 		if ((flags & CFQAS) == 0)
639 			spi_max_qas(starget) = 0;
640 
641 		/* Transinfo values have been set to BIOS settings */
642 		spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
643 		spi_min_period(starget) = tinfo->user.period;
644 		spi_max_offset(starget) = tinfo->user.offset;
645 	}
646 
647 	tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
648 				    starget->id, &tstate);
649 	ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
650 			    CAM_LUN_WILDCARD, channel,
651 			    ROLE_INITIATOR);
652 	ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
653 			 AHD_TRANS_GOAL, /*paused*/FALSE);
654 	ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
655 		      AHD_TRANS_GOAL, /*paused*/FALSE);
656 	ahd_unlock(ahd, &flags);
657 
658 	return 0;
659 }
660 
661 static void
662 ahd_linux_target_destroy(struct scsi_target *starget)
663 {
664 	struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
665 
666 	*ahd_targp = NULL;
667 }
668 
669 static int
670 ahd_linux_slave_alloc(struct scsi_device *sdev)
671 {
672 	struct	ahd_softc *ahd =
673 		*((struct ahd_softc **)sdev->host->hostdata);
674 	struct ahd_linux_device *dev;
675 
676 	if (bootverbose)
677 		printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
678 
679 	dev = scsi_transport_device_data(sdev);
680 	memset(dev, 0, sizeof(*dev));
681 
682 	/*
683 	 * We start out life using untagged
684 	 * transactions of which we allow one.
685 	 */
686 	dev->openings = 1;
687 
688 	/*
689 	 * Set maxtags to 0.  This will be changed if we
690 	 * later determine that we are dealing with
691 	 * a tagged queuing capable device.
692 	 */
693 	dev->maxtags = 0;
694 
695 	return (0);
696 }
697 
698 static int
699 ahd_linux_slave_configure(struct scsi_device *sdev)
700 {
701 	struct	ahd_softc *ahd;
702 
703 	ahd = *((struct ahd_softc **)sdev->host->hostdata);
704 	if (bootverbose)
705 		sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
706 
707 	ahd_linux_device_queue_depth(sdev);
708 
709 	/* Initial Domain Validation */
710 	if (!spi_initial_dv(sdev->sdev_target))
711 		spi_dv_device(sdev);
712 
713 	return 0;
714 }
715 
716 #if defined(__i386__)
717 /*
718  * Return the disk geometry for the given SCSI device.
719  */
720 static int
721 ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
722 		    sector_t capacity, int geom[])
723 {
724 	uint8_t *bh;
725 	int	 heads;
726 	int	 sectors;
727 	int	 cylinders;
728 	int	 ret;
729 	int	 extended;
730 	struct	 ahd_softc *ahd;
731 
732 	ahd = *((struct ahd_softc **)sdev->host->hostdata);
733 
734 	bh = scsi_bios_ptable(bdev);
735 	if (bh) {
736 		ret = scsi_partsize(bh, capacity,
737 				    &geom[2], &geom[0], &geom[1]);
738 		kfree(bh);
739 		if (ret != -1)
740 			return (ret);
741 	}
742 	heads = 64;
743 	sectors = 32;
744 	cylinders = aic_sector_div(capacity, heads, sectors);
745 
746 	if (aic79xx_extended != 0)
747 		extended = 1;
748 	else
749 		extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
750 	if (extended && cylinders >= 1024) {
751 		heads = 255;
752 		sectors = 63;
753 		cylinders = aic_sector_div(capacity, heads, sectors);
754 	}
755 	geom[0] = heads;
756 	geom[1] = sectors;
757 	geom[2] = cylinders;
758 	return (0);
759 }
760 #endif
761 
762 /*
763  * Abort the current SCSI command(s).
764  */
765 static int
766 ahd_linux_abort(struct scsi_cmnd *cmd)
767 {
768 	int error;
769 
770 	error = ahd_linux_queue_abort_cmd(cmd);
771 
772 	return error;
773 }
774 
775 /*
776  * Attempt to send a target reset message to the device that timed out.
777  */
778 static int
779 ahd_linux_dev_reset(struct scsi_cmnd *cmd)
780 {
781 	struct ahd_softc *ahd;
782 	struct ahd_linux_device *dev;
783 	struct scb *reset_scb;
784 	u_int  cdb_byte;
785 	int    retval = SUCCESS;
786 	int    paused;
787 	int    wait;
788 	struct	ahd_initiator_tinfo *tinfo;
789 	struct	ahd_tmode_tstate *tstate;
790 	unsigned long flags;
791 	DECLARE_COMPLETION_ONSTACK(done);
792 
793 	reset_scb = NULL;
794 	paused = FALSE;
795 	wait = FALSE;
796 	ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
797 
798 	scmd_printk(KERN_INFO, cmd,
799 		    "Attempting to queue a TARGET RESET message:");
800 
801 	printf("CDB:");
802 	for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
803 		printf(" 0x%x", cmd->cmnd[cdb_byte]);
804 	printf("\n");
805 
806 	/*
807 	 * Determine if we currently own this command.
808 	 */
809 	dev = scsi_transport_device_data(cmd->device);
810 
811 	if (dev == NULL) {
812 		/*
813 		 * No target device for this command exists,
814 		 * so we must not still own the command.
815 		 */
816 		scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
817 		return SUCCESS;
818 	}
819 
820 	/*
821 	 * Generate us a new SCB
822 	 */
823 	reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
824 	if (!reset_scb) {
825 		scmd_printk(KERN_INFO, cmd, "No SCB available\n");
826 		return FAILED;
827 	}
828 
829 	tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
830 				    cmd->device->id, &tstate);
831 	reset_scb->io_ctx = cmd;
832 	reset_scb->platform_data->dev = dev;
833 	reset_scb->sg_count = 0;
834 	ahd_set_residual(reset_scb, 0);
835 	ahd_set_sense_residual(reset_scb, 0);
836 	reset_scb->platform_data->xfer_len = 0;
837 	reset_scb->hscb->control = 0;
838 	reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd);
839 	reset_scb->hscb->lun = cmd->device->lun;
840 	reset_scb->hscb->cdb_len = 0;
841 	reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
842 	reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
843 	if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
844 		reset_scb->flags |= SCB_PACKETIZED;
845 	} else {
846 		reset_scb->hscb->control |= MK_MESSAGE;
847 	}
848 	dev->openings--;
849 	dev->active++;
850 	dev->commands_issued++;
851 
852 	ahd_lock(ahd, &flags);
853 
854 	LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
855 	ahd_queue_scb(ahd, reset_scb);
856 
857 	ahd->platform_data->eh_done = &done;
858 	ahd_unlock(ahd, &flags);
859 
860 	printf("%s: Device reset code sleeping\n", ahd_name(ahd));
861 	if (!wait_for_completion_timeout(&done, 5 * HZ)) {
862 		ahd_lock(ahd, &flags);
863 		ahd->platform_data->eh_done = NULL;
864 		ahd_unlock(ahd, &flags);
865 		printf("%s: Device reset timer expired (active %d)\n",
866 		       ahd_name(ahd), dev->active);
867 		retval = FAILED;
868 	}
869 	printf("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
870 
871 	return (retval);
872 }
873 
874 /*
875  * Reset the SCSI bus.
876  */
877 static int
878 ahd_linux_bus_reset(struct scsi_cmnd *cmd)
879 {
880 	struct ahd_softc *ahd;
881 	int    found;
882 	unsigned long flags;
883 
884 	ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
885 #ifdef AHD_DEBUG
886 	if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
887 		printf("%s: Bus reset called for cmd %p\n",
888 		       ahd_name(ahd), cmd);
889 #endif
890 	ahd_lock(ahd, &flags);
891 
892 	found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
893 				  /*initiate reset*/TRUE);
894 	ahd_unlock(ahd, &flags);
895 
896 	if (bootverbose)
897 		printf("%s: SCSI bus reset delivered. "
898 		       "%d SCBs aborted.\n", ahd_name(ahd), found);
899 
900 	return (SUCCESS);
901 }
902 
903 struct scsi_host_template aic79xx_driver_template = {
904 	.module			= THIS_MODULE,
905 	.name			= "aic79xx",
906 	.proc_name		= "aic79xx",
907 	.proc_info		= ahd_linux_proc_info,
908 	.info			= ahd_linux_info,
909 	.queuecommand		= ahd_linux_queue,
910 	.eh_abort_handler	= ahd_linux_abort,
911 	.eh_device_reset_handler = ahd_linux_dev_reset,
912 	.eh_bus_reset_handler	= ahd_linux_bus_reset,
913 #if defined(__i386__)
914 	.bios_param		= ahd_linux_biosparam,
915 #endif
916 	.can_queue		= AHD_MAX_QUEUE,
917 	.this_id		= -1,
918 	.max_sectors		= 8192,
919 	.cmd_per_lun		= 2,
920 	.use_clustering		= ENABLE_CLUSTERING,
921 	.slave_alloc		= ahd_linux_slave_alloc,
922 	.slave_configure	= ahd_linux_slave_configure,
923 	.target_alloc		= ahd_linux_target_alloc,
924 	.target_destroy		= ahd_linux_target_destroy,
925 };
926 
927 /******************************** Bus DMA *************************************/
928 int
929 ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
930 		   bus_size_t alignment, bus_size_t boundary,
931 		   dma_addr_t lowaddr, dma_addr_t highaddr,
932 		   bus_dma_filter_t *filter, void *filterarg,
933 		   bus_size_t maxsize, int nsegments,
934 		   bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
935 {
936 	bus_dma_tag_t dmat;
937 
938 	dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT);
939 	if (dmat == NULL)
940 		return (ENOMEM);
941 
942 	/*
943 	 * Linux is very simplistic about DMA memory.  For now don't
944 	 * maintain all specification information.  Once Linux supplies
945 	 * better facilities for doing these operations, or the
946 	 * needs of this particular driver change, we might need to do
947 	 * more here.
948 	 */
949 	dmat->alignment = alignment;
950 	dmat->boundary = boundary;
951 	dmat->maxsize = maxsize;
952 	*ret_tag = dmat;
953 	return (0);
954 }
955 
956 void
957 ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
958 {
959 	free(dmat, M_DEVBUF);
960 }
961 
962 int
963 ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
964 		 int flags, bus_dmamap_t *mapp)
965 {
966 	*vaddr = pci_alloc_consistent(ahd->dev_softc,
967 				      dmat->maxsize, mapp);
968 	if (*vaddr == NULL)
969 		return (ENOMEM);
970 	return(0);
971 }
972 
973 void
974 ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
975 		void* vaddr, bus_dmamap_t map)
976 {
977 	pci_free_consistent(ahd->dev_softc, dmat->maxsize,
978 			    vaddr, map);
979 }
980 
981 int
982 ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
983 		void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
984 		void *cb_arg, int flags)
985 {
986 	/*
987 	 * Assume for now that this will only be used during
988 	 * initialization and not for per-transaction buffer mapping.
989 	 */
990 	bus_dma_segment_t stack_sg;
991 
992 	stack_sg.ds_addr = map;
993 	stack_sg.ds_len = dmat->maxsize;
994 	cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
995 	return (0);
996 }
997 
998 void
999 ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
1000 {
1001 }
1002 
1003 int
1004 ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
1005 {
1006 	/* Nothing to do */
1007 	return (0);
1008 }
1009 
1010 /********************* Platform Dependent Functions ***************************/
1011 static void
1012 ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
1013 {
1014 
1015 	if ((instance >= 0)
1016 	 && (instance < ARRAY_SIZE(aic79xx_iocell_info))) {
1017 		uint8_t *iocell_info;
1018 
1019 		iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
1020 		iocell_info[index] = value & 0xFFFF;
1021 		if (bootverbose)
1022 			printf("iocell[%d:%ld] = %d\n", instance, index, value);
1023 	}
1024 }
1025 
1026 static void
1027 ahd_linux_setup_tag_info_global(char *p)
1028 {
1029 	int tags, i, j;
1030 
1031 	tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
1032 	printf("Setting Global Tags= %d\n", tags);
1033 
1034 	for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) {
1035 		for (j = 0; j < AHD_NUM_TARGETS; j++) {
1036 			aic79xx_tag_info[i].tag_commands[j] = tags;
1037 		}
1038 	}
1039 }
1040 
1041 static void
1042 ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
1043 {
1044 
1045 	if ((instance >= 0) && (targ >= 0)
1046 	 && (instance < ARRAY_SIZE(aic79xx_tag_info))
1047 	 && (targ < AHD_NUM_TARGETS)) {
1048 		aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
1049 		if (bootverbose)
1050 			printf("tag_info[%d:%d] = %d\n", instance, targ, value);
1051 	}
1052 }
1053 
1054 static char *
1055 ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
1056 		       void (*callback)(u_long, int, int, int32_t),
1057 		       u_long callback_arg)
1058 {
1059 	char	*tok_end;
1060 	char	*tok_end2;
1061 	int      i;
1062 	int      instance;
1063 	int	 targ;
1064 	int	 done;
1065 	char	 tok_list[] = {'.', ',', '{', '}', '\0'};
1066 
1067 	/* All options use a ':' name/arg separator */
1068 	if (*opt_arg != ':')
1069 		return (opt_arg);
1070 	opt_arg++;
1071 	instance = -1;
1072 	targ = -1;
1073 	done = FALSE;
1074 	/*
1075 	 * Restore separator that may be in
1076 	 * the middle of our option argument.
1077 	 */
1078 	tok_end = strchr(opt_arg, '\0');
1079 	if (tok_end < end)
1080 		*tok_end = ',';
1081 	while (!done) {
1082 		switch (*opt_arg) {
1083 		case '{':
1084 			if (instance == -1) {
1085 				instance = 0;
1086 			} else {
1087 				if (depth > 1) {
1088 					if (targ == -1)
1089 						targ = 0;
1090 				} else {
1091 					printf("Malformed Option %s\n",
1092 					       opt_name);
1093 					done = TRUE;
1094 				}
1095 			}
1096 			opt_arg++;
1097 			break;
1098 		case '}':
1099 			if (targ != -1)
1100 				targ = -1;
1101 			else if (instance != -1)
1102 				instance = -1;
1103 			opt_arg++;
1104 			break;
1105 		case ',':
1106 		case '.':
1107 			if (instance == -1)
1108 				done = TRUE;
1109 			else if (targ >= 0)
1110 				targ++;
1111 			else if (instance >= 0)
1112 				instance++;
1113 			opt_arg++;
1114 			break;
1115 		case '\0':
1116 			done = TRUE;
1117 			break;
1118 		default:
1119 			tok_end = end;
1120 			for (i = 0; tok_list[i]; i++) {
1121 				tok_end2 = strchr(opt_arg, tok_list[i]);
1122 				if ((tok_end2) && (tok_end2 < tok_end))
1123 					tok_end = tok_end2;
1124 			}
1125 			callback(callback_arg, instance, targ,
1126 				 simple_strtol(opt_arg, NULL, 0));
1127 			opt_arg = tok_end;
1128 			break;
1129 		}
1130 	}
1131 	return (opt_arg);
1132 }
1133 
1134 /*
1135  * Handle Linux boot parameters. This routine allows for assigning a value
1136  * to a parameter with a ':' between the parameter and the value.
1137  * ie. aic79xx=stpwlev:1,extended
1138  */
1139 static int
1140 aic79xx_setup(char *s)
1141 {
1142 	int	i, n;
1143 	char   *p;
1144 	char   *end;
1145 
1146 	static const struct {
1147 		const char *name;
1148 		uint32_t *flag;
1149 	} options[] = {
1150 		{ "extended", &aic79xx_extended },
1151 		{ "no_reset", &aic79xx_no_reset },
1152 		{ "verbose", &aic79xx_verbose },
1153 		{ "allow_memio", &aic79xx_allow_memio},
1154 #ifdef AHD_DEBUG
1155 		{ "debug", &ahd_debug },
1156 #endif
1157 		{ "periodic_otag", &aic79xx_periodic_otag },
1158 		{ "pci_parity", &aic79xx_pci_parity },
1159 		{ "seltime", &aic79xx_seltime },
1160 		{ "tag_info", NULL },
1161 		{ "global_tag_depth", NULL},
1162 		{ "slewrate", NULL },
1163 		{ "precomp", NULL },
1164 		{ "amplitude", NULL },
1165 		{ "slowcrc", &aic79xx_slowcrc },
1166 	};
1167 
1168 	end = strchr(s, '\0');
1169 
1170 	/*
1171 	 * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
1172 	 * will never be 0 in this case.
1173 	 */
1174 	n = 0;
1175 
1176 	while ((p = strsep(&s, ",.")) != NULL) {
1177 		if (*p == '\0')
1178 			continue;
1179 		for (i = 0; i < ARRAY_SIZE(options); i++) {
1180 
1181 			n = strlen(options[i].name);
1182 			if (strncmp(options[i].name, p, n) == 0)
1183 				break;
1184 		}
1185 		if (i == ARRAY_SIZE(options))
1186 			continue;
1187 
1188 		if (strncmp(p, "global_tag_depth", n) == 0) {
1189 			ahd_linux_setup_tag_info_global(p + n);
1190 		} else if (strncmp(p, "tag_info", n) == 0) {
1191 			s = ahd_parse_brace_option("tag_info", p + n, end,
1192 			    2, ahd_linux_setup_tag_info, 0);
1193 		} else if (strncmp(p, "slewrate", n) == 0) {
1194 			s = ahd_parse_brace_option("slewrate",
1195 			    p + n, end, 1, ahd_linux_setup_iocell_info,
1196 			    AIC79XX_SLEWRATE_INDEX);
1197 		} else if (strncmp(p, "precomp", n) == 0) {
1198 			s = ahd_parse_brace_option("precomp",
1199 			    p + n, end, 1, ahd_linux_setup_iocell_info,
1200 			    AIC79XX_PRECOMP_INDEX);
1201 		} else if (strncmp(p, "amplitude", n) == 0) {
1202 			s = ahd_parse_brace_option("amplitude",
1203 			    p + n, end, 1, ahd_linux_setup_iocell_info,
1204 			    AIC79XX_AMPLITUDE_INDEX);
1205 		} else if (p[n] == ':') {
1206 			*(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
1207 		} else if (!strncmp(p, "verbose", n)) {
1208 			*(options[i].flag) = 1;
1209 		} else {
1210 			*(options[i].flag) ^= 0xFFFFFFFF;
1211 		}
1212 	}
1213 	return 1;
1214 }
1215 
1216 __setup("aic79xx=", aic79xx_setup);
1217 
1218 uint32_t aic79xx_verbose;
1219 
1220 int
1221 ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
1222 {
1223 	char	buf[80];
1224 	struct	Scsi_Host *host;
1225 	char	*new_name;
1226 	u_long	s;
1227 	int	retval;
1228 
1229 	template->name = ahd->description;
1230 	host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
1231 	if (host == NULL)
1232 		return (ENOMEM);
1233 
1234 	*((struct ahd_softc **)host->hostdata) = ahd;
1235 	ahd->platform_data->host = host;
1236 	host->can_queue = AHD_MAX_QUEUE;
1237 	host->cmd_per_lun = 2;
1238 	host->sg_tablesize = AHD_NSEG;
1239 	host->this_id = ahd->our_id;
1240 	host->irq = ahd->platform_data->irq;
1241 	host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
1242 	host->max_lun = AHD_NUM_LUNS;
1243 	host->max_channel = 0;
1244 	host->sg_tablesize = AHD_NSEG;
1245 	ahd_lock(ahd, &s);
1246 	ahd_set_unit(ahd, ahd_linux_unit++);
1247 	ahd_unlock(ahd, &s);
1248 	sprintf(buf, "scsi%d", host->host_no);
1249 	new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
1250 	if (new_name != NULL) {
1251 		strcpy(new_name, buf);
1252 		ahd_set_name(ahd, new_name);
1253 	}
1254 	host->unique_id = ahd->unit;
1255 	ahd_linux_initialize_scsi_bus(ahd);
1256 	ahd_intr_enable(ahd, TRUE);
1257 
1258 	host->transportt = ahd_linux_transport_template;
1259 
1260 	retval = scsi_add_host(host, &ahd->dev_softc->dev);
1261 	if (retval) {
1262 		printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
1263 		scsi_host_put(host);
1264 		return retval;
1265 	}
1266 
1267 	scsi_scan_host(host);
1268 	return 0;
1269 }
1270 
1271 /*
1272  * Place the SCSI bus into a known state by either resetting it,
1273  * or forcing transfer negotiations on the next command to any
1274  * target.
1275  */
1276 static void
1277 ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
1278 {
1279 	u_int target_id;
1280 	u_int numtarg;
1281 	unsigned long s;
1282 
1283 	target_id = 0;
1284 	numtarg = 0;
1285 
1286 	if (aic79xx_no_reset != 0)
1287 		ahd->flags &= ~AHD_RESET_BUS_A;
1288 
1289 	if ((ahd->flags & AHD_RESET_BUS_A) != 0)
1290 		ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
1291 	else
1292 		numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
1293 
1294 	ahd_lock(ahd, &s);
1295 
1296 	/*
1297 	 * Force negotiation to async for all targets that
1298 	 * will not see an initial bus reset.
1299 	 */
1300 	for (; target_id < numtarg; target_id++) {
1301 		struct ahd_devinfo devinfo;
1302 		struct ahd_initiator_tinfo *tinfo;
1303 		struct ahd_tmode_tstate *tstate;
1304 
1305 		tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1306 					    target_id, &tstate);
1307 		ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
1308 				    CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
1309 		ahd_update_neg_request(ahd, &devinfo, tstate,
1310 				       tinfo, AHD_NEG_ALWAYS);
1311 	}
1312 	ahd_unlock(ahd, &s);
1313 	/* Give the bus some time to recover */
1314 	if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
1315 		ahd_freeze_simq(ahd);
1316 		msleep(AIC79XX_RESET_DELAY);
1317 		ahd_release_simq(ahd);
1318 	}
1319 }
1320 
1321 int
1322 ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
1323 {
1324 	ahd->platform_data =
1325 	    malloc(sizeof(struct ahd_platform_data), M_DEVBUF, M_NOWAIT);
1326 	if (ahd->platform_data == NULL)
1327 		return (ENOMEM);
1328 	memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
1329 	ahd->platform_data->irq = AHD_LINUX_NOIRQ;
1330 	ahd_lockinit(ahd);
1331 	ahd->seltime = (aic79xx_seltime & 0x3) << 4;
1332 	return (0);
1333 }
1334 
1335 void
1336 ahd_platform_free(struct ahd_softc *ahd)
1337 {
1338 	struct scsi_target *starget;
1339 	int i;
1340 
1341 	if (ahd->platform_data != NULL) {
1342 		/* destroy all of the device and target objects */
1343 		for (i = 0; i < AHD_NUM_TARGETS; i++) {
1344 			starget = ahd->platform_data->starget[i];
1345 			if (starget != NULL) {
1346 				ahd->platform_data->starget[i] = NULL;
1347 			}
1348 		}
1349 
1350 		if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
1351 			free_irq(ahd->platform_data->irq, ahd);
1352 		if (ahd->tags[0] == BUS_SPACE_PIO
1353 		 && ahd->bshs[0].ioport != 0)
1354 			release_region(ahd->bshs[0].ioport, 256);
1355 		if (ahd->tags[1] == BUS_SPACE_PIO
1356 		 && ahd->bshs[1].ioport != 0)
1357 			release_region(ahd->bshs[1].ioport, 256);
1358 		if (ahd->tags[0] == BUS_SPACE_MEMIO
1359 		 && ahd->bshs[0].maddr != NULL) {
1360 			iounmap(ahd->bshs[0].maddr);
1361 			release_mem_region(ahd->platform_data->mem_busaddr,
1362 					   0x1000);
1363 		}
1364 		if (ahd->platform_data->host)
1365 			scsi_host_put(ahd->platform_data->host);
1366 
1367 		free(ahd->platform_data, M_DEVBUF);
1368 	}
1369 }
1370 
1371 void
1372 ahd_platform_init(struct ahd_softc *ahd)
1373 {
1374 	/*
1375 	 * Lookup and commit any modified IO Cell options.
1376 	 */
1377 	if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
1378 		const struct ahd_linux_iocell_opts *iocell_opts;
1379 
1380 		iocell_opts = &aic79xx_iocell_info[ahd->unit];
1381 		if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
1382 			AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
1383 		if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
1384 			AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
1385 		if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
1386 			AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
1387 	}
1388 
1389 }
1390 
1391 void
1392 ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
1393 {
1394 	ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1395 				SCB_GET_CHANNEL(ahd, scb),
1396 				SCB_GET_LUN(scb), SCB_LIST_NULL,
1397 				ROLE_UNKNOWN, CAM_REQUEUE_REQ);
1398 }
1399 
1400 void
1401 ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
1402 		      struct ahd_devinfo *devinfo, ahd_queue_alg alg)
1403 {
1404 	struct ahd_linux_device *dev;
1405 	int was_queuing;
1406 	int now_queuing;
1407 
1408 	if (sdev == NULL)
1409 		return;
1410 
1411 	dev = scsi_transport_device_data(sdev);
1412 
1413 	if (dev == NULL)
1414 		return;
1415 	was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
1416 	switch (alg) {
1417 	default:
1418 	case AHD_QUEUE_NONE:
1419 		now_queuing = 0;
1420 		break;
1421 	case AHD_QUEUE_BASIC:
1422 		now_queuing = AHD_DEV_Q_BASIC;
1423 		break;
1424 	case AHD_QUEUE_TAGGED:
1425 		now_queuing = AHD_DEV_Q_TAGGED;
1426 		break;
1427 	}
1428 	if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
1429 	 && (was_queuing != now_queuing)
1430 	 && (dev->active != 0)) {
1431 		dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
1432 		dev->qfrozen++;
1433 	}
1434 
1435 	dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
1436 	if (now_queuing) {
1437 		u_int usertags;
1438 
1439 		usertags = ahd_linux_user_tagdepth(ahd, devinfo);
1440 		if (!was_queuing) {
1441 			/*
1442 			 * Start out agressively and allow our
1443 			 * dynamic queue depth algorithm to take
1444 			 * care of the rest.
1445 			 */
1446 			dev->maxtags = usertags;
1447 			dev->openings = dev->maxtags - dev->active;
1448 		}
1449 		if (dev->maxtags == 0) {
1450 			/*
1451 			 * Queueing is disabled by the user.
1452 			 */
1453 			dev->openings = 1;
1454 		} else if (alg == AHD_QUEUE_TAGGED) {
1455 			dev->flags |= AHD_DEV_Q_TAGGED;
1456 			if (aic79xx_periodic_otag != 0)
1457 				dev->flags |= AHD_DEV_PERIODIC_OTAG;
1458 		} else
1459 			dev->flags |= AHD_DEV_Q_BASIC;
1460 	} else {
1461 		/* We can only have one opening. */
1462 		dev->maxtags = 0;
1463 		dev->openings =  1 - dev->active;
1464 	}
1465 
1466 	switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
1467 	case AHD_DEV_Q_BASIC:
1468 		scsi_set_tag_type(sdev, MSG_SIMPLE_TASK);
1469 		scsi_activate_tcq(sdev, dev->openings + dev->active);
1470 		break;
1471 	case AHD_DEV_Q_TAGGED:
1472 		scsi_set_tag_type(sdev, MSG_ORDERED_TASK);
1473 		scsi_activate_tcq(sdev, dev->openings + dev->active);
1474 		break;
1475 	default:
1476 		/*
1477 		 * We allow the OS to queue 2 untagged transactions to
1478 		 * us at any time even though we can only execute them
1479 		 * serially on the controller/device.  This should
1480 		 * remove some latency.
1481 		 */
1482 		scsi_deactivate_tcq(sdev, 1);
1483 		break;
1484 	}
1485 }
1486 
1487 int
1488 ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
1489 			int lun, u_int tag, role_t role, uint32_t status)
1490 {
1491 	return 0;
1492 }
1493 
1494 static u_int
1495 ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
1496 {
1497 	static int warned_user;
1498 	u_int tags;
1499 
1500 	tags = 0;
1501 	if ((ahd->user_discenable & devinfo->target_mask) != 0) {
1502 		if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) {
1503 
1504 			if (warned_user == 0) {
1505 				printf(KERN_WARNING
1506 "aic79xx: WARNING: Insufficient tag_info instances\n"
1507 "aic79xx: for installed controllers.  Using defaults\n"
1508 "aic79xx: Please update the aic79xx_tag_info array in\n"
1509 "aic79xx: the aic79xx_osm.c source file.\n");
1510 				warned_user++;
1511 			}
1512 			tags = AHD_MAX_QUEUE;
1513 		} else {
1514 			adapter_tag_info_t *tag_info;
1515 
1516 			tag_info = &aic79xx_tag_info[ahd->unit];
1517 			tags = tag_info->tag_commands[devinfo->target_offset];
1518 			if (tags > AHD_MAX_QUEUE)
1519 				tags = AHD_MAX_QUEUE;
1520 		}
1521 	}
1522 	return (tags);
1523 }
1524 
1525 /*
1526  * Determines the queue depth for a given device.
1527  */
1528 static void
1529 ahd_linux_device_queue_depth(struct scsi_device *sdev)
1530 {
1531 	struct	ahd_devinfo devinfo;
1532 	u_int	tags;
1533 	struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
1534 
1535 	ahd_compile_devinfo(&devinfo,
1536 			    ahd->our_id,
1537 			    sdev->sdev_target->id, sdev->lun,
1538 			    sdev->sdev_target->channel == 0 ? 'A' : 'B',
1539 			    ROLE_INITIATOR);
1540 	tags = ahd_linux_user_tagdepth(ahd, &devinfo);
1541 	if (tags != 0 && sdev->tagged_supported != 0) {
1542 
1543 		ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
1544 		ahd_send_async(ahd, devinfo.channel, devinfo.target,
1545 			       devinfo.lun, AC_TRANSFER_NEG);
1546 		ahd_print_devinfo(ahd, &devinfo);
1547 		printf("Tagged Queuing enabled.  Depth %d\n", tags);
1548 	} else {
1549 		ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
1550 		ahd_send_async(ahd, devinfo.channel, devinfo.target,
1551 			       devinfo.lun, AC_TRANSFER_NEG);
1552 	}
1553 }
1554 
1555 static int
1556 ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
1557 		      struct scsi_cmnd *cmd)
1558 {
1559 	struct	 scb *scb;
1560 	struct	 hardware_scb *hscb;
1561 	struct	 ahd_initiator_tinfo *tinfo;
1562 	struct	 ahd_tmode_tstate *tstate;
1563 	u_int	 col_idx;
1564 	uint16_t mask;
1565 	unsigned long flags;
1566 	int nseg;
1567 
1568 	nseg = scsi_dma_map(cmd);
1569 	if (nseg < 0)
1570 		return SCSI_MLQUEUE_HOST_BUSY;
1571 
1572 	ahd_lock(ahd, &flags);
1573 
1574 	/*
1575 	 * Get an scb to use.
1576 	 */
1577 	tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1578 				    cmd->device->id, &tstate);
1579 	if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
1580 	 || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
1581 		col_idx = AHD_NEVER_COL_IDX;
1582 	} else {
1583 		col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
1584 					    cmd->device->lun);
1585 	}
1586 	if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
1587 		ahd->flags |= AHD_RESOURCE_SHORTAGE;
1588 		ahd_unlock(ahd, &flags);
1589 		scsi_dma_unmap(cmd);
1590 		return SCSI_MLQUEUE_HOST_BUSY;
1591 	}
1592 
1593 	scb->io_ctx = cmd;
1594 	scb->platform_data->dev = dev;
1595 	hscb = scb->hscb;
1596 	cmd->host_scribble = (char *)scb;
1597 
1598 	/*
1599 	 * Fill out basics of the HSCB.
1600 	 */
1601 	hscb->control = 0;
1602 	hscb->scsiid = BUILD_SCSIID(ahd, cmd);
1603 	hscb->lun = cmd->device->lun;
1604 	scb->hscb->task_management = 0;
1605 	mask = SCB_GET_TARGET_MASK(ahd, scb);
1606 
1607 	if ((ahd->user_discenable & mask) != 0)
1608 		hscb->control |= DISCENB;
1609 
1610 	if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
1611 		scb->flags |= SCB_PACKETIZED;
1612 
1613 	if ((tstate->auto_negotiate & mask) != 0) {
1614 		scb->flags |= SCB_AUTO_NEGOTIATE;
1615 		scb->hscb->control |= MK_MESSAGE;
1616 	}
1617 
1618 	if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
1619 		int	msg_bytes;
1620 		uint8_t tag_msgs[2];
1621 
1622 		msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
1623 		if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
1624 			hscb->control |= tag_msgs[0];
1625 			if (tag_msgs[0] == MSG_ORDERED_TASK)
1626 				dev->commands_since_idle_or_otag = 0;
1627 		} else
1628 		if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
1629 		 && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
1630 			hscb->control |= MSG_ORDERED_TASK;
1631 			dev->commands_since_idle_or_otag = 0;
1632 		} else {
1633 			hscb->control |= MSG_SIMPLE_TASK;
1634 		}
1635 	}
1636 
1637 	hscb->cdb_len = cmd->cmd_len;
1638 	memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
1639 
1640 	scb->platform_data->xfer_len = 0;
1641 	ahd_set_residual(scb, 0);
1642 	ahd_set_sense_residual(scb, 0);
1643 	scb->sg_count = 0;
1644 
1645 	if (nseg > 0) {
1646 		void *sg = scb->sg_list;
1647 		struct scatterlist *cur_seg;
1648 		int i;
1649 
1650 		scb->platform_data->xfer_len = 0;
1651 
1652 		scsi_for_each_sg(cmd, cur_seg, nseg, i) {
1653 			dma_addr_t addr;
1654 			bus_size_t len;
1655 
1656 			addr = sg_dma_address(cur_seg);
1657 			len = sg_dma_len(cur_seg);
1658 			scb->platform_data->xfer_len += len;
1659 			sg = ahd_sg_setup(ahd, scb, sg, addr, len,
1660 					  i == (nseg - 1));
1661 		}
1662 	}
1663 
1664 	LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
1665 	dev->openings--;
1666 	dev->active++;
1667 	dev->commands_issued++;
1668 
1669 	if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
1670 		dev->commands_since_idle_or_otag++;
1671 	scb->flags |= SCB_ACTIVE;
1672 	ahd_queue_scb(ahd, scb);
1673 
1674 	ahd_unlock(ahd, &flags);
1675 
1676 	return 0;
1677 }
1678 
1679 /*
1680  * SCSI controller interrupt handler.
1681  */
1682 irqreturn_t
1683 ahd_linux_isr(int irq, void *dev_id)
1684 {
1685 	struct	ahd_softc *ahd;
1686 	u_long	flags;
1687 	int	ours;
1688 
1689 	ahd = (struct ahd_softc *) dev_id;
1690 	ahd_lock(ahd, &flags);
1691 	ours = ahd_intr(ahd);
1692 	ahd_unlock(ahd, &flags);
1693 	return IRQ_RETVAL(ours);
1694 }
1695 
1696 void
1697 ahd_send_async(struct ahd_softc *ahd, char channel,
1698 	       u_int target, u_int lun, ac_code code)
1699 {
1700 	switch (code) {
1701 	case AC_TRANSFER_NEG:
1702 	{
1703 		char	buf[80];
1704 		struct  scsi_target *starget;
1705 		struct	info_str info;
1706 		struct	ahd_initiator_tinfo *tinfo;
1707 		struct	ahd_tmode_tstate *tstate;
1708 		unsigned int target_ppr_options;
1709 
1710 		BUG_ON(target == CAM_TARGET_WILDCARD);
1711 
1712 		info.buffer = buf;
1713 		info.length = sizeof(buf);
1714 		info.offset = 0;
1715 		info.pos = 0;
1716 		tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
1717 					    target, &tstate);
1718 
1719 		/*
1720 		 * Don't bother reporting results while
1721 		 * negotiations are still pending.
1722 		 */
1723 		if (tinfo->curr.period != tinfo->goal.period
1724 		 || tinfo->curr.width != tinfo->goal.width
1725 		 || tinfo->curr.offset != tinfo->goal.offset
1726 		 || tinfo->curr.ppr_options != tinfo->goal.ppr_options)
1727 			if (bootverbose == 0)
1728 				break;
1729 
1730 		/*
1731 		 * Don't bother reporting results that
1732 		 * are identical to those last reported.
1733 		 */
1734 		starget = ahd->platform_data->starget[target];
1735 		if (starget == NULL)
1736 			break;
1737 
1738 		target_ppr_options =
1739 			(spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
1740 			+ (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
1741 			+ (spi_iu(starget) ?  MSG_EXT_PPR_IU_REQ : 0)
1742 			+ (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
1743 			+ (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
1744 			+ (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
1745 			+ (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
1746 			+ (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
1747 
1748 		if (tinfo->curr.period == spi_period(starget)
1749 		    && tinfo->curr.width == spi_width(starget)
1750 		    && tinfo->curr.offset == spi_offset(starget)
1751 		 && tinfo->curr.ppr_options == target_ppr_options)
1752 			if (bootverbose == 0)
1753 				break;
1754 
1755 		spi_period(starget) = tinfo->curr.period;
1756 		spi_width(starget) = tinfo->curr.width;
1757 		spi_offset(starget) = tinfo->curr.offset;
1758 		spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
1759 		spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
1760 		spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
1761 		spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
1762 		spi_pcomp_en(starget) =  tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
1763 		spi_rti(starget) =  tinfo->curr.ppr_options &  MSG_EXT_PPR_RTI ? 1 : 0;
1764 		spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
1765 		spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
1766 		spi_display_xfer_agreement(starget);
1767 		break;
1768 	}
1769         case AC_SENT_BDR:
1770 	{
1771 		WARN_ON(lun != CAM_LUN_WILDCARD);
1772 		scsi_report_device_reset(ahd->platform_data->host,
1773 					 channel - 'A', target);
1774 		break;
1775 	}
1776         case AC_BUS_RESET:
1777 		if (ahd->platform_data->host != NULL) {
1778 			scsi_report_bus_reset(ahd->platform_data->host,
1779 					      channel - 'A');
1780 		}
1781                 break;
1782         default:
1783                 panic("ahd_send_async: Unexpected async event");
1784         }
1785 }
1786 
1787 /*
1788  * Calls the higher level scsi done function and frees the scb.
1789  */
1790 void
1791 ahd_done(struct ahd_softc *ahd, struct scb *scb)
1792 {
1793 	struct scsi_cmnd *cmd;
1794 	struct	  ahd_linux_device *dev;
1795 
1796 	if ((scb->flags & SCB_ACTIVE) == 0) {
1797 		printf("SCB %d done'd twice\n", SCB_GET_TAG(scb));
1798 		ahd_dump_card_state(ahd);
1799 		panic("Stopping for safety");
1800 	}
1801 	LIST_REMOVE(scb, pending_links);
1802 	cmd = scb->io_ctx;
1803 	dev = scb->platform_data->dev;
1804 	dev->active--;
1805 	dev->openings++;
1806 	if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
1807 		cmd->result &= ~(CAM_DEV_QFRZN << 16);
1808 		dev->qfrozen--;
1809 	}
1810 	ahd_linux_unmap_scb(ahd, scb);
1811 
1812 	/*
1813 	 * Guard against stale sense data.
1814 	 * The Linux mid-layer assumes that sense
1815 	 * was retrieved anytime the first byte of
1816 	 * the sense buffer looks "sane".
1817 	 */
1818 	cmd->sense_buffer[0] = 0;
1819 	if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
1820 		uint32_t amount_xferred;
1821 
1822 		amount_xferred =
1823 		    ahd_get_transfer_length(scb) - ahd_get_residual(scb);
1824 		if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
1825 #ifdef AHD_DEBUG
1826 			if ((ahd_debug & AHD_SHOW_MISC) != 0) {
1827 				ahd_print_path(ahd, scb);
1828 				printf("Set CAM_UNCOR_PARITY\n");
1829 			}
1830 #endif
1831 			ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
1832 #ifdef AHD_REPORT_UNDERFLOWS
1833 		/*
1834 		 * This code is disabled by default as some
1835 		 * clients of the SCSI system do not properly
1836 		 * initialize the underflow parameter.  This
1837 		 * results in spurious termination of commands
1838 		 * that complete as expected (e.g. underflow is
1839 		 * allowed as command can return variable amounts
1840 		 * of data.
1841 		 */
1842 		} else if (amount_xferred < scb->io_ctx->underflow) {
1843 			u_int i;
1844 
1845 			ahd_print_path(ahd, scb);
1846 			printf("CDB:");
1847 			for (i = 0; i < scb->io_ctx->cmd_len; i++)
1848 				printf(" 0x%x", scb->io_ctx->cmnd[i]);
1849 			printf("\n");
1850 			ahd_print_path(ahd, scb);
1851 			printf("Saw underflow (%ld of %ld bytes). "
1852 			       "Treated as error\n",
1853 				ahd_get_residual(scb),
1854 				ahd_get_transfer_length(scb));
1855 			ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1856 #endif
1857 		} else {
1858 			ahd_set_transaction_status(scb, CAM_REQ_CMP);
1859 		}
1860 	} else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
1861 		ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
1862 	}
1863 
1864 	if (dev->openings == 1
1865 	 && ahd_get_transaction_status(scb) == CAM_REQ_CMP
1866 	 && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
1867 		dev->tag_success_count++;
1868 	/*
1869 	 * Some devices deal with temporary internal resource
1870 	 * shortages by returning queue full.  When the queue
1871 	 * full occurrs, we throttle back.  Slowly try to get
1872 	 * back to our previous queue depth.
1873 	 */
1874 	if ((dev->openings + dev->active) < dev->maxtags
1875 	 && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
1876 		dev->tag_success_count = 0;
1877 		dev->openings++;
1878 	}
1879 
1880 	if (dev->active == 0)
1881 		dev->commands_since_idle_or_otag = 0;
1882 
1883 	if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
1884 		printf("Recovery SCB completes\n");
1885 		if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
1886 		 || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
1887 			ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
1888 
1889 		if (ahd->platform_data->eh_done)
1890 			complete(ahd->platform_data->eh_done);
1891 	}
1892 
1893 	ahd_free_scb(ahd, scb);
1894 	ahd_linux_queue_cmd_complete(ahd, cmd);
1895 }
1896 
1897 static void
1898 ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
1899 			     struct scsi_device *sdev, struct scb *scb)
1900 {
1901 	struct	ahd_devinfo devinfo;
1902 	struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
1903 
1904 	ahd_compile_devinfo(&devinfo,
1905 			    ahd->our_id,
1906 			    sdev->sdev_target->id, sdev->lun,
1907 			    sdev->sdev_target->channel == 0 ? 'A' : 'B',
1908 			    ROLE_INITIATOR);
1909 
1910 	/*
1911 	 * We don't currently trust the mid-layer to
1912 	 * properly deal with queue full or busy.  So,
1913 	 * when one occurs, we tell the mid-layer to
1914 	 * unconditionally requeue the command to us
1915 	 * so that we can retry it ourselves.  We also
1916 	 * implement our own throttling mechanism so
1917 	 * we don't clobber the device with too many
1918 	 * commands.
1919 	 */
1920 	switch (ahd_get_scsi_status(scb)) {
1921 	default:
1922 		break;
1923 	case SCSI_STATUS_CHECK_COND:
1924 	case SCSI_STATUS_CMD_TERMINATED:
1925 	{
1926 		struct scsi_cmnd *cmd;
1927 
1928 		/*
1929 		 * Copy sense information to the OS's cmd
1930 		 * structure if it is available.
1931 		 */
1932 		cmd = scb->io_ctx;
1933 		if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
1934 			struct scsi_status_iu_header *siu;
1935 			u_int sense_size;
1936 			u_int sense_offset;
1937 
1938 			if (scb->flags & SCB_SENSE) {
1939 				sense_size = min(sizeof(struct scsi_sense_data)
1940 					       - ahd_get_sense_residual(scb),
1941 						 (u_long)SCSI_SENSE_BUFFERSIZE);
1942 				sense_offset = 0;
1943 			} else {
1944 				/*
1945 				 * Copy only the sense data into the provided
1946 				 * buffer.
1947 				 */
1948 				siu = (struct scsi_status_iu_header *)
1949 				    scb->sense_data;
1950 				sense_size = min_t(size_t,
1951 						scsi_4btoul(siu->sense_length),
1952 						SCSI_SENSE_BUFFERSIZE);
1953 				sense_offset = SIU_SENSE_OFFSET(siu);
1954 			}
1955 
1956 			memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1957 			memcpy(cmd->sense_buffer,
1958 			       ahd_get_sense_buf(ahd, scb)
1959 			       + sense_offset, sense_size);
1960 			cmd->result |= (DRIVER_SENSE << 24);
1961 
1962 #ifdef AHD_DEBUG
1963 			if (ahd_debug & AHD_SHOW_SENSE) {
1964 				int i;
1965 
1966 				printf("Copied %d bytes of sense data at %d:",
1967 				       sense_size, sense_offset);
1968 				for (i = 0; i < sense_size; i++) {
1969 					if ((i & 0xF) == 0)
1970 						printf("\n");
1971 					printf("0x%x ", cmd->sense_buffer[i]);
1972 				}
1973 				printf("\n");
1974 			}
1975 #endif
1976 		}
1977 		break;
1978 	}
1979 	case SCSI_STATUS_QUEUE_FULL:
1980 		/*
1981 		 * By the time the core driver has returned this
1982 		 * command, all other commands that were queued
1983 		 * to us but not the device have been returned.
1984 		 * This ensures that dev->active is equal to
1985 		 * the number of commands actually queued to
1986 		 * the device.
1987 		 */
1988 		dev->tag_success_count = 0;
1989 		if (dev->active != 0) {
1990 			/*
1991 			 * Drop our opening count to the number
1992 			 * of commands currently outstanding.
1993 			 */
1994 			dev->openings = 0;
1995 #ifdef AHD_DEBUG
1996 			if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
1997 				ahd_print_path(ahd, scb);
1998 				printf("Dropping tag count to %d\n",
1999 				       dev->active);
2000 			}
2001 #endif
2002 			if (dev->active == dev->tags_on_last_queuefull) {
2003 
2004 				dev->last_queuefull_same_count++;
2005 				/*
2006 				 * If we repeatedly see a queue full
2007 				 * at the same queue depth, this
2008 				 * device has a fixed number of tag
2009 				 * slots.  Lock in this tag depth
2010 				 * so we stop seeing queue fulls from
2011 				 * this device.
2012 				 */
2013 				if (dev->last_queuefull_same_count
2014 				 == AHD_LOCK_TAGS_COUNT) {
2015 					dev->maxtags = dev->active;
2016 					ahd_print_path(ahd, scb);
2017 					printf("Locking max tag count at %d\n",
2018 					       dev->active);
2019 				}
2020 			} else {
2021 				dev->tags_on_last_queuefull = dev->active;
2022 				dev->last_queuefull_same_count = 0;
2023 			}
2024 			ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
2025 			ahd_set_scsi_status(scb, SCSI_STATUS_OK);
2026 			ahd_platform_set_tags(ahd, sdev, &devinfo,
2027 				     (dev->flags & AHD_DEV_Q_BASIC)
2028 				   ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2029 			break;
2030 		}
2031 		/*
2032 		 * Drop down to a single opening, and treat this
2033 		 * as if the target returned BUSY SCSI status.
2034 		 */
2035 		dev->openings = 1;
2036 		ahd_platform_set_tags(ahd, sdev, &devinfo,
2037 			     (dev->flags & AHD_DEV_Q_BASIC)
2038 			   ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2039 		ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
2040 	}
2041 }
2042 
2043 static void
2044 ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
2045 {
2046 	int status;
2047 	int new_status = DID_OK;
2048 	int do_fallback = 0;
2049 	int scsi_status;
2050 
2051 	/*
2052 	 * Map CAM error codes into Linux Error codes.  We
2053 	 * avoid the conversion so that the DV code has the
2054 	 * full error information available when making
2055 	 * state change decisions.
2056 	 */
2057 
2058 	status = ahd_cmd_get_transaction_status(cmd);
2059 	switch (status) {
2060 	case CAM_REQ_INPROG:
2061 	case CAM_REQ_CMP:
2062 		new_status = DID_OK;
2063 		break;
2064 	case CAM_AUTOSENSE_FAIL:
2065 		new_status = DID_ERROR;
2066 		/* Fallthrough */
2067 	case CAM_SCSI_STATUS_ERROR:
2068 		scsi_status = ahd_cmd_get_scsi_status(cmd);
2069 
2070 		switch(scsi_status) {
2071 		case SCSI_STATUS_CMD_TERMINATED:
2072 		case SCSI_STATUS_CHECK_COND:
2073 			if ((cmd->result >> 24) != DRIVER_SENSE) {
2074 				do_fallback = 1;
2075 			} else {
2076 				struct scsi_sense_data *sense;
2077 
2078 				sense = (struct scsi_sense_data *)
2079 					cmd->sense_buffer;
2080 				if (sense->extra_len >= 5 &&
2081 				    (sense->add_sense_code == 0x47
2082 				     || sense->add_sense_code == 0x48))
2083 					do_fallback = 1;
2084 			}
2085 			break;
2086 		default:
2087 			break;
2088 		}
2089 		break;
2090 	case CAM_REQ_ABORTED:
2091 		new_status = DID_ABORT;
2092 		break;
2093 	case CAM_BUSY:
2094 		new_status = DID_BUS_BUSY;
2095 		break;
2096 	case CAM_REQ_INVALID:
2097 	case CAM_PATH_INVALID:
2098 		new_status = DID_BAD_TARGET;
2099 		break;
2100 	case CAM_SEL_TIMEOUT:
2101 		new_status = DID_NO_CONNECT;
2102 		break;
2103 	case CAM_SCSI_BUS_RESET:
2104 	case CAM_BDR_SENT:
2105 		new_status = DID_RESET;
2106 		break;
2107 	case CAM_UNCOR_PARITY:
2108 		new_status = DID_PARITY;
2109 		do_fallback = 1;
2110 		break;
2111 	case CAM_CMD_TIMEOUT:
2112 		new_status = DID_TIME_OUT;
2113 		do_fallback = 1;
2114 		break;
2115 	case CAM_REQ_CMP_ERR:
2116 	case CAM_UNEXP_BUSFREE:
2117 	case CAM_DATA_RUN_ERR:
2118 		new_status = DID_ERROR;
2119 		do_fallback = 1;
2120 		break;
2121 	case CAM_UA_ABORT:
2122 	case CAM_NO_HBA:
2123 	case CAM_SEQUENCE_FAIL:
2124 	case CAM_CCB_LEN_ERR:
2125 	case CAM_PROVIDE_FAIL:
2126 	case CAM_REQ_TERMIO:
2127 	case CAM_UNREC_HBA_ERROR:
2128 	case CAM_REQ_TOO_BIG:
2129 		new_status = DID_ERROR;
2130 		break;
2131 	case CAM_REQUEUE_REQ:
2132 		new_status = DID_REQUEUE;
2133 		break;
2134 	default:
2135 		/* We should never get here */
2136 		new_status = DID_ERROR;
2137 		break;
2138 	}
2139 
2140 	if (do_fallback) {
2141 		printf("%s: device overrun (status %x) on %d:%d:%d\n",
2142 		       ahd_name(ahd), status, cmd->device->channel,
2143 		       cmd->device->id, cmd->device->lun);
2144 	}
2145 
2146 	ahd_cmd_set_transaction_status(cmd, new_status);
2147 
2148 	cmd->scsi_done(cmd);
2149 }
2150 
2151 static void
2152 ahd_freeze_simq(struct ahd_softc *ahd)
2153 {
2154 	scsi_block_requests(ahd->platform_data->host);
2155 }
2156 
2157 static void
2158 ahd_release_simq(struct ahd_softc *ahd)
2159 {
2160 	scsi_unblock_requests(ahd->platform_data->host);
2161 }
2162 
2163 static int
2164 ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
2165 {
2166 	struct ahd_softc *ahd;
2167 	struct ahd_linux_device *dev;
2168 	struct scb *pending_scb;
2169 	u_int  saved_scbptr;
2170 	u_int  active_scbptr;
2171 	u_int  last_phase;
2172 	u_int  saved_scsiid;
2173 	u_int  cdb_byte;
2174 	int    retval;
2175 	int    was_paused;
2176 	int    paused;
2177 	int    wait;
2178 	int    disconnected;
2179 	ahd_mode_state saved_modes;
2180 	unsigned long flags;
2181 
2182 	pending_scb = NULL;
2183 	paused = FALSE;
2184 	wait = FALSE;
2185 	ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
2186 
2187 	scmd_printk(KERN_INFO, cmd,
2188 		    "Attempting to queue an ABORT message:");
2189 
2190 	printf("CDB:");
2191 	for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
2192 		printf(" 0x%x", cmd->cmnd[cdb_byte]);
2193 	printf("\n");
2194 
2195 	ahd_lock(ahd, &flags);
2196 
2197 	/*
2198 	 * First determine if we currently own this command.
2199 	 * Start by searching the device queue.  If not found
2200 	 * there, check the pending_scb list.  If not found
2201 	 * at all, and the system wanted us to just abort the
2202 	 * command, return success.
2203 	 */
2204 	dev = scsi_transport_device_data(cmd->device);
2205 
2206 	if (dev == NULL) {
2207 		/*
2208 		 * No target device for this command exists,
2209 		 * so we must not still own the command.
2210 		 */
2211 		scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
2212 		retval = SUCCESS;
2213 		goto no_cmd;
2214 	}
2215 
2216 	/*
2217 	 * See if we can find a matching cmd in the pending list.
2218 	 */
2219 	LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2220 		if (pending_scb->io_ctx == cmd)
2221 			break;
2222 	}
2223 
2224 	if (pending_scb == NULL) {
2225 		scmd_printk(KERN_INFO, cmd, "Command not found\n");
2226 		goto no_cmd;
2227 	}
2228 
2229 	if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
2230 		/*
2231 		 * We can't queue two recovery actions using the same SCB
2232 		 */
2233 		retval = FAILED;
2234 		goto  done;
2235 	}
2236 
2237 	/*
2238 	 * Ensure that the card doesn't do anything
2239 	 * behind our back.  Also make sure that we
2240 	 * didn't "just" miss an interrupt that would
2241 	 * affect this cmd.
2242 	 */
2243 	was_paused = ahd_is_paused(ahd);
2244 	ahd_pause_and_flushwork(ahd);
2245 	paused = TRUE;
2246 
2247 	if ((pending_scb->flags & SCB_ACTIVE) == 0) {
2248 		scmd_printk(KERN_INFO, cmd, "Command already completed\n");
2249 		goto no_cmd;
2250 	}
2251 
2252 	printf("%s: At time of recovery, card was %spaused\n",
2253 	       ahd_name(ahd), was_paused ? "" : "not ");
2254 	ahd_dump_card_state(ahd);
2255 
2256 	disconnected = TRUE;
2257 	if (ahd_search_qinfifo(ahd, cmd->device->id,
2258 			       cmd->device->channel + 'A',
2259 			       cmd->device->lun,
2260 			       pending_scb->hscb->tag,
2261 			       ROLE_INITIATOR, CAM_REQ_ABORTED,
2262 			       SEARCH_COMPLETE) > 0) {
2263 		printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2264 		       ahd_name(ahd), cmd->device->channel,
2265 		       cmd->device->id, cmd->device->lun);
2266 		retval = SUCCESS;
2267 		goto done;
2268 	}
2269 
2270 	saved_modes = ahd_save_modes(ahd);
2271 	ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2272 	last_phase = ahd_inb(ahd, LASTPHASE);
2273 	saved_scbptr = ahd_get_scbptr(ahd);
2274 	active_scbptr = saved_scbptr;
2275 	if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
2276 		struct scb *bus_scb;
2277 
2278 		bus_scb = ahd_lookup_scb(ahd, active_scbptr);
2279 		if (bus_scb == pending_scb)
2280 			disconnected = FALSE;
2281 	}
2282 
2283 	/*
2284 	 * At this point, pending_scb is the scb associated with the
2285 	 * passed in command.  That command is currently active on the
2286 	 * bus or is in the disconnected state.
2287 	 */
2288 	saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2289 	if (last_phase != P_BUSFREE
2290 	    && SCB_GET_TAG(pending_scb) == active_scbptr) {
2291 
2292 		/*
2293 		 * We're active on the bus, so assert ATN
2294 		 * and hope that the target responds.
2295 		 */
2296 		pending_scb = ahd_lookup_scb(ahd, active_scbptr);
2297 		pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2298 		ahd_outb(ahd, MSG_OUT, HOST_MSG);
2299 		ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
2300 		scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
2301 		wait = TRUE;
2302 	} else if (disconnected) {
2303 
2304 		/*
2305 		 * Actually re-queue this SCB in an attempt
2306 		 * to select the device before it reconnects.
2307 		 */
2308 		pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2309 		ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
2310 		pending_scb->hscb->cdb_len = 0;
2311 		pending_scb->hscb->task_attribute = 0;
2312 		pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
2313 
2314 		if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
2315 			/*
2316 			 * Mark the SCB has having an outstanding
2317 			 * task management function.  Should the command
2318 			 * complete normally before the task management
2319 			 * function can be sent, the host will be notified
2320 			 * to abort our requeued SCB.
2321 			 */
2322 			ahd_outb(ahd, SCB_TASK_MANAGEMENT,
2323 				 pending_scb->hscb->task_management);
2324 		} else {
2325 			/*
2326 			 * If non-packetized, set the MK_MESSAGE control
2327 			 * bit indicating that we desire to send a message.
2328 			 * We also set the disconnected flag since there is
2329 			 * no guarantee that our SCB control byte matches
2330 			 * the version on the card.  We don't want the
2331 			 * sequencer to abort the command thinking an
2332 			 * unsolicited reselection occurred.
2333 			 */
2334 			pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
2335 
2336 			/*
2337 			 * The sequencer will never re-reference the
2338 			 * in-core SCB.  To make sure we are notified
2339 			 * during reselection, set the MK_MESSAGE flag in
2340 			 * the card's copy of the SCB.
2341 			 */
2342 			ahd_outb(ahd, SCB_CONTROL,
2343 				 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
2344 		}
2345 
2346 		/*
2347 		 * Clear out any entries in the QINFIFO first
2348 		 * so we are the next SCB for this target
2349 		 * to run.
2350 		 */
2351 		ahd_search_qinfifo(ahd, cmd->device->id,
2352 				   cmd->device->channel + 'A', cmd->device->lun,
2353 				   SCB_LIST_NULL, ROLE_INITIATOR,
2354 				   CAM_REQUEUE_REQ, SEARCH_COMPLETE);
2355 		ahd_qinfifo_requeue_tail(ahd, pending_scb);
2356 		ahd_set_scbptr(ahd, saved_scbptr);
2357 		ahd_print_path(ahd, pending_scb);
2358 		printf("Device is disconnected, re-queuing SCB\n");
2359 		wait = TRUE;
2360 	} else {
2361 		scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
2362 		retval = FAILED;
2363 		goto done;
2364 	}
2365 
2366 no_cmd:
2367 	/*
2368 	 * Our assumption is that if we don't have the command, no
2369 	 * recovery action was required, so we return success.  Again,
2370 	 * the semantics of the mid-layer recovery engine are not
2371 	 * well defined, so this may change in time.
2372 	 */
2373 	retval = SUCCESS;
2374 done:
2375 	if (paused)
2376 		ahd_unpause(ahd);
2377 	if (wait) {
2378 		DECLARE_COMPLETION_ONSTACK(done);
2379 
2380 		ahd->platform_data->eh_done = &done;
2381 		ahd_unlock(ahd, &flags);
2382 
2383 		printf("%s: Recovery code sleeping\n", ahd_name(ahd));
2384 		if (!wait_for_completion_timeout(&done, 5 * HZ)) {
2385 			ahd_lock(ahd, &flags);
2386 			ahd->platform_data->eh_done = NULL;
2387 			ahd_unlock(ahd, &flags);
2388 			printf("%s: Timer Expired (active %d)\n",
2389 			       ahd_name(ahd), dev->active);
2390 			retval = FAILED;
2391 		}
2392 		printf("Recovery code awake\n");
2393 	} else
2394 		ahd_unlock(ahd, &flags);
2395 
2396 	if (retval != SUCCESS)
2397 		printf("%s: Command abort returning 0x%x\n",
2398 		       ahd_name(ahd), retval);
2399 
2400 	return retval;
2401 }
2402 
2403 static void ahd_linux_set_width(struct scsi_target *starget, int width)
2404 {
2405 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2406 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2407 	struct ahd_devinfo devinfo;
2408 	unsigned long flags;
2409 
2410 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2411 			    starget->channel + 'A', ROLE_INITIATOR);
2412 	ahd_lock(ahd, &flags);
2413 	ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
2414 	ahd_unlock(ahd, &flags);
2415 }
2416 
2417 static void ahd_linux_set_period(struct scsi_target *starget, int period)
2418 {
2419 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2420 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2421 	struct ahd_tmode_tstate *tstate;
2422 	struct ahd_initiator_tinfo *tinfo
2423 		= ahd_fetch_transinfo(ahd,
2424 				      starget->channel + 'A',
2425 				      shost->this_id, starget->id, &tstate);
2426 	struct ahd_devinfo devinfo;
2427 	unsigned int ppr_options = tinfo->goal.ppr_options;
2428 	unsigned int dt;
2429 	unsigned long flags;
2430 	unsigned long offset = tinfo->goal.offset;
2431 
2432 #ifdef AHD_DEBUG
2433 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2434 		printf("%s: set period to %d\n", ahd_name(ahd), period);
2435 #endif
2436 	if (offset == 0)
2437 		offset = MAX_OFFSET;
2438 
2439 	if (period < 8)
2440 		period = 8;
2441 	if (period < 10) {
2442 		if (spi_max_width(starget)) {
2443 			ppr_options |= MSG_EXT_PPR_DT_REQ;
2444 			if (period == 8)
2445 				ppr_options |= MSG_EXT_PPR_IU_REQ;
2446 		} else
2447 			period = 10;
2448 	}
2449 
2450 	dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2451 
2452 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2453 			    starget->channel + 'A', ROLE_INITIATOR);
2454 
2455 	/* all PPR requests apart from QAS require wide transfers */
2456 	if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
2457 		if (spi_width(starget) == 0)
2458 			ppr_options &= MSG_EXT_PPR_QAS_REQ;
2459 	}
2460 
2461 	ahd_find_syncrate(ahd, &period, &ppr_options,
2462 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2463 
2464 	ahd_lock(ahd, &flags);
2465 	ahd_set_syncrate(ahd, &devinfo, period, offset,
2466 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2467 	ahd_unlock(ahd, &flags);
2468 }
2469 
2470 static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
2471 {
2472 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2473 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2474 	struct ahd_tmode_tstate *tstate;
2475 	struct ahd_initiator_tinfo *tinfo
2476 		= ahd_fetch_transinfo(ahd,
2477 				      starget->channel + 'A',
2478 				      shost->this_id, starget->id, &tstate);
2479 	struct ahd_devinfo devinfo;
2480 	unsigned int ppr_options = 0;
2481 	unsigned int period = 0;
2482 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2483 	unsigned long flags;
2484 
2485 #ifdef AHD_DEBUG
2486 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2487 		printf("%s: set offset to %d\n", ahd_name(ahd), offset);
2488 #endif
2489 
2490 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2491 			    starget->channel + 'A', ROLE_INITIATOR);
2492 	if (offset != 0) {
2493 		period = tinfo->goal.period;
2494 		ppr_options = tinfo->goal.ppr_options;
2495 		ahd_find_syncrate(ahd, &period, &ppr_options,
2496 				  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2497 	}
2498 
2499 	ahd_lock(ahd, &flags);
2500 	ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
2501 			 AHD_TRANS_GOAL, FALSE);
2502 	ahd_unlock(ahd, &flags);
2503 }
2504 
2505 static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
2506 {
2507 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2508 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2509 	struct ahd_tmode_tstate *tstate;
2510 	struct ahd_initiator_tinfo *tinfo
2511 		= ahd_fetch_transinfo(ahd,
2512 				      starget->channel + 'A',
2513 				      shost->this_id, starget->id, &tstate);
2514 	struct ahd_devinfo devinfo;
2515 	unsigned int ppr_options = tinfo->goal.ppr_options
2516 		& ~MSG_EXT_PPR_DT_REQ;
2517 	unsigned int period = tinfo->goal.period;
2518 	unsigned int width = tinfo->goal.width;
2519 	unsigned long flags;
2520 
2521 #ifdef AHD_DEBUG
2522 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2523 		printf("%s: %s DT\n", ahd_name(ahd),
2524 		       dt ? "enabling" : "disabling");
2525 #endif
2526 	if (dt && spi_max_width(starget)) {
2527 		ppr_options |= MSG_EXT_PPR_DT_REQ;
2528 		if (!width)
2529 			ahd_linux_set_width(starget, 1);
2530 	} else {
2531 		if (period <= 9)
2532 			period = 10; /* If resetting DT, period must be >= 25ns */
2533 		/* IU is invalid without DT set */
2534 		ppr_options &= ~MSG_EXT_PPR_IU_REQ;
2535 	}
2536 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2537 			    starget->channel + 'A', ROLE_INITIATOR);
2538 	ahd_find_syncrate(ahd, &period, &ppr_options,
2539 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2540 
2541 	ahd_lock(ahd, &flags);
2542 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2543 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2544 	ahd_unlock(ahd, &flags);
2545 }
2546 
2547 static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
2548 {
2549 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2550 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2551 	struct ahd_tmode_tstate *tstate;
2552 	struct ahd_initiator_tinfo *tinfo
2553 		= ahd_fetch_transinfo(ahd,
2554 				      starget->channel + 'A',
2555 				      shost->this_id, starget->id, &tstate);
2556 	struct ahd_devinfo devinfo;
2557 	unsigned int ppr_options = tinfo->goal.ppr_options
2558 		& ~MSG_EXT_PPR_QAS_REQ;
2559 	unsigned int period = tinfo->goal.period;
2560 	unsigned int dt;
2561 	unsigned long flags;
2562 
2563 #ifdef AHD_DEBUG
2564 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2565 		printf("%s: %s QAS\n", ahd_name(ahd),
2566 		       qas ? "enabling" : "disabling");
2567 #endif
2568 
2569 	if (qas) {
2570 		ppr_options |= MSG_EXT_PPR_QAS_REQ;
2571 	}
2572 
2573 	dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2574 
2575 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2576 			    starget->channel + 'A', ROLE_INITIATOR);
2577 	ahd_find_syncrate(ahd, &period, &ppr_options,
2578 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2579 
2580 	ahd_lock(ahd, &flags);
2581 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2582 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2583 	ahd_unlock(ahd, &flags);
2584 }
2585 
2586 static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
2587 {
2588 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2589 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2590 	struct ahd_tmode_tstate *tstate;
2591 	struct ahd_initiator_tinfo *tinfo
2592 		= ahd_fetch_transinfo(ahd,
2593 				      starget->channel + 'A',
2594 				      shost->this_id, starget->id, &tstate);
2595 	struct ahd_devinfo devinfo;
2596 	unsigned int ppr_options = tinfo->goal.ppr_options
2597 		& ~MSG_EXT_PPR_IU_REQ;
2598 	unsigned int period = tinfo->goal.period;
2599 	unsigned int dt;
2600 	unsigned long flags;
2601 
2602 #ifdef AHD_DEBUG
2603 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2604 		printf("%s: %s IU\n", ahd_name(ahd),
2605 		       iu ? "enabling" : "disabling");
2606 #endif
2607 
2608 	if (iu && spi_max_width(starget)) {
2609 		ppr_options |= MSG_EXT_PPR_IU_REQ;
2610 		ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
2611 	}
2612 
2613 	dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2614 
2615 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2616 			    starget->channel + 'A', ROLE_INITIATOR);
2617 	ahd_find_syncrate(ahd, &period, &ppr_options,
2618 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2619 
2620 	ahd_lock(ahd, &flags);
2621 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2622 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2623 	ahd_unlock(ahd, &flags);
2624 }
2625 
2626 static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
2627 {
2628 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2629 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2630 	struct ahd_tmode_tstate *tstate;
2631 	struct ahd_initiator_tinfo *tinfo
2632 		= ahd_fetch_transinfo(ahd,
2633 				      starget->channel + 'A',
2634 				      shost->this_id, starget->id, &tstate);
2635 	struct ahd_devinfo devinfo;
2636 	unsigned int ppr_options = tinfo->goal.ppr_options
2637 		& ~MSG_EXT_PPR_RD_STRM;
2638 	unsigned int period = tinfo->goal.period;
2639 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2640 	unsigned long flags;
2641 
2642 #ifdef AHD_DEBUG
2643 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2644 		printf("%s: %s Read Streaming\n", ahd_name(ahd),
2645 		       rdstrm  ? "enabling" : "disabling");
2646 #endif
2647 
2648 	if (rdstrm && spi_max_width(starget))
2649 		ppr_options |= MSG_EXT_PPR_RD_STRM;
2650 
2651 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2652 			    starget->channel + 'A', ROLE_INITIATOR);
2653 	ahd_find_syncrate(ahd, &period, &ppr_options,
2654 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2655 
2656 	ahd_lock(ahd, &flags);
2657 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2658 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2659 	ahd_unlock(ahd, &flags);
2660 }
2661 
2662 static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
2663 {
2664 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2665 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2666 	struct ahd_tmode_tstate *tstate;
2667 	struct ahd_initiator_tinfo *tinfo
2668 		= ahd_fetch_transinfo(ahd,
2669 				      starget->channel + 'A',
2670 				      shost->this_id, starget->id, &tstate);
2671 	struct ahd_devinfo devinfo;
2672 	unsigned int ppr_options = tinfo->goal.ppr_options
2673 		& ~MSG_EXT_PPR_WR_FLOW;
2674 	unsigned int period = tinfo->goal.period;
2675 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2676 	unsigned long flags;
2677 
2678 #ifdef AHD_DEBUG
2679 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2680 		printf("%s: %s Write Flow Control\n", ahd_name(ahd),
2681 		       wrflow ? "enabling" : "disabling");
2682 #endif
2683 
2684 	if (wrflow && spi_max_width(starget))
2685 		ppr_options |= MSG_EXT_PPR_WR_FLOW;
2686 
2687 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2688 			    starget->channel + 'A', ROLE_INITIATOR);
2689 	ahd_find_syncrate(ahd, &period, &ppr_options,
2690 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2691 
2692 	ahd_lock(ahd, &flags);
2693 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2694 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2695 	ahd_unlock(ahd, &flags);
2696 }
2697 
2698 static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
2699 {
2700 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2701 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2702 	struct ahd_tmode_tstate *tstate;
2703 	struct ahd_initiator_tinfo *tinfo
2704 		= ahd_fetch_transinfo(ahd,
2705 				      starget->channel + 'A',
2706 				      shost->this_id, starget->id, &tstate);
2707 	struct ahd_devinfo devinfo;
2708 	unsigned int ppr_options = tinfo->goal.ppr_options
2709 		& ~MSG_EXT_PPR_RTI;
2710 	unsigned int period = tinfo->goal.period;
2711 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2712 	unsigned long flags;
2713 
2714 	if ((ahd->features & AHD_RTI) == 0) {
2715 #ifdef AHD_DEBUG
2716 		if ((ahd_debug & AHD_SHOW_DV) != 0)
2717 			printf("%s: RTI not available\n", ahd_name(ahd));
2718 #endif
2719 		return;
2720 	}
2721 
2722 #ifdef AHD_DEBUG
2723 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2724 		printf("%s: %s RTI\n", ahd_name(ahd),
2725 		       rti ? "enabling" : "disabling");
2726 #endif
2727 
2728 	if (rti && spi_max_width(starget))
2729 		ppr_options |= MSG_EXT_PPR_RTI;
2730 
2731 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2732 			    starget->channel + 'A', ROLE_INITIATOR);
2733 	ahd_find_syncrate(ahd, &period, &ppr_options,
2734 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2735 
2736 	ahd_lock(ahd, &flags);
2737 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2738 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2739 	ahd_unlock(ahd, &flags);
2740 }
2741 
2742 static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
2743 {
2744 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2745 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2746 	struct ahd_tmode_tstate *tstate;
2747 	struct ahd_initiator_tinfo *tinfo
2748 		= ahd_fetch_transinfo(ahd,
2749 				      starget->channel + 'A',
2750 				      shost->this_id, starget->id, &tstate);
2751 	struct ahd_devinfo devinfo;
2752 	unsigned int ppr_options = tinfo->goal.ppr_options
2753 		& ~MSG_EXT_PPR_PCOMP_EN;
2754 	unsigned int period = tinfo->goal.period;
2755 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2756 	unsigned long flags;
2757 
2758 #ifdef AHD_DEBUG
2759 	if ((ahd_debug & AHD_SHOW_DV) != 0)
2760 		printf("%s: %s Precompensation\n", ahd_name(ahd),
2761 		       pcomp ? "Enable" : "Disable");
2762 #endif
2763 
2764 	if (pcomp && spi_max_width(starget)) {
2765 		uint8_t precomp;
2766 
2767 		if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
2768 			const struct ahd_linux_iocell_opts *iocell_opts;
2769 
2770 			iocell_opts = &aic79xx_iocell_info[ahd->unit];
2771 			precomp = iocell_opts->precomp;
2772 		} else {
2773 			precomp = AIC79XX_DEFAULT_PRECOMP;
2774 		}
2775 		ppr_options |= MSG_EXT_PPR_PCOMP_EN;
2776 		AHD_SET_PRECOMP(ahd, precomp);
2777 	} else {
2778 		AHD_SET_PRECOMP(ahd, 0);
2779 	}
2780 
2781 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2782 			    starget->channel + 'A', ROLE_INITIATOR);
2783 	ahd_find_syncrate(ahd, &period, &ppr_options,
2784 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2785 
2786 	ahd_lock(ahd, &flags);
2787 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2788 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2789 	ahd_unlock(ahd, &flags);
2790 }
2791 
2792 static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
2793 {
2794 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2795 	struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2796 	struct ahd_tmode_tstate *tstate;
2797 	struct ahd_initiator_tinfo *tinfo
2798 		= ahd_fetch_transinfo(ahd,
2799 				      starget->channel + 'A',
2800 				      shost->this_id, starget->id, &tstate);
2801 	struct ahd_devinfo devinfo;
2802 	unsigned int ppr_options = tinfo->goal.ppr_options
2803 		& ~MSG_EXT_PPR_HOLD_MCS;
2804 	unsigned int period = tinfo->goal.period;
2805 	unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2806 	unsigned long flags;
2807 
2808 	if (hold && spi_max_width(starget))
2809 		ppr_options |= MSG_EXT_PPR_HOLD_MCS;
2810 
2811 	ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2812 			    starget->channel + 'A', ROLE_INITIATOR);
2813 	ahd_find_syncrate(ahd, &period, &ppr_options,
2814 			  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2815 
2816 	ahd_lock(ahd, &flags);
2817 	ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2818 			 ppr_options, AHD_TRANS_GOAL, FALSE);
2819 	ahd_unlock(ahd, &flags);
2820 }
2821 
2822 static void ahd_linux_get_signalling(struct Scsi_Host *shost)
2823 {
2824 	struct ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata;
2825 	unsigned long flags;
2826 	u8 mode;
2827 
2828 	ahd_lock(ahd, &flags);
2829 	ahd_pause(ahd);
2830 	mode = ahd_inb(ahd, SBLKCTL);
2831 	ahd_unpause(ahd);
2832 	ahd_unlock(ahd, &flags);
2833 
2834 	if (mode & ENAB40)
2835 		spi_signalling(shost) = SPI_SIGNAL_LVD;
2836 	else if (mode & ENAB20)
2837 		spi_signalling(shost) = SPI_SIGNAL_SE;
2838 	else
2839 		spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
2840 }
2841 
2842 static struct spi_function_template ahd_linux_transport_functions = {
2843 	.set_offset	= ahd_linux_set_offset,
2844 	.show_offset	= 1,
2845 	.set_period	= ahd_linux_set_period,
2846 	.show_period	= 1,
2847 	.set_width	= ahd_linux_set_width,
2848 	.show_width	= 1,
2849 	.set_dt		= ahd_linux_set_dt,
2850 	.show_dt	= 1,
2851 	.set_iu		= ahd_linux_set_iu,
2852 	.show_iu	= 1,
2853 	.set_qas	= ahd_linux_set_qas,
2854 	.show_qas	= 1,
2855 	.set_rd_strm	= ahd_linux_set_rd_strm,
2856 	.show_rd_strm	= 1,
2857 	.set_wr_flow	= ahd_linux_set_wr_flow,
2858 	.show_wr_flow	= 1,
2859 	.set_rti	= ahd_linux_set_rti,
2860 	.show_rti	= 1,
2861 	.set_pcomp_en	= ahd_linux_set_pcomp_en,
2862 	.show_pcomp_en	= 1,
2863 	.set_hold_mcs	= ahd_linux_set_hold_mcs,
2864 	.show_hold_mcs	= 1,
2865 	.get_signalling = ahd_linux_get_signalling,
2866 };
2867 
2868 static int __init
2869 ahd_linux_init(void)
2870 {
2871 	int	error = 0;
2872 
2873 	/*
2874 	 * If we've been passed any parameters, process them now.
2875 	 */
2876 	if (aic79xx)
2877 		aic79xx_setup(aic79xx);
2878 
2879 	ahd_linux_transport_template =
2880 		spi_attach_transport(&ahd_linux_transport_functions);
2881 	if (!ahd_linux_transport_template)
2882 		return -ENODEV;
2883 
2884 	scsi_transport_reserve_device(ahd_linux_transport_template,
2885 				      sizeof(struct ahd_linux_device));
2886 
2887 	error = ahd_linux_pci_init();
2888 	if (error)
2889 		spi_release_transport(ahd_linux_transport_template);
2890 	return error;
2891 }
2892 
2893 static void __exit
2894 ahd_linux_exit(void)
2895 {
2896 	ahd_linux_pci_exit();
2897 	spi_release_transport(ahd_linux_transport_template);
2898 }
2899 
2900 module_init(ahd_linux_init);
2901 module_exit(ahd_linux_exit);
2902