1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for Adaptec AHA-1542 SCSI host adapters 4 * 5 * Copyright (C) 1992 Tommy Thorn 6 * Copyright (C) 1993, 1994, 1995 Eric Youngdale 7 * Copyright (C) 2015 Ondrej Zary 8 */ 9 10 #include <linux/module.h> 11 #include <linux/interrupt.h> 12 #include <linux/kernel.h> 13 #include <linux/types.h> 14 #include <linux/string.h> 15 #include <linux/delay.h> 16 #include <linux/init.h> 17 #include <linux/spinlock.h> 18 #include <linux/isa.h> 19 #include <linux/pnp.h> 20 #include <linux/slab.h> 21 #include <linux/io.h> 22 #include <asm/dma.h> 23 #include <scsi/scsi_cmnd.h> 24 #include <scsi/scsi_device.h> 25 #include <scsi/scsi_host.h> 26 #include "aha1542.h" 27 28 #define MAXBOARDS 4 29 30 static bool isapnp = 1; 31 module_param(isapnp, bool, 0); 32 MODULE_PARM_DESC(isapnp, "enable PnP support (default=1)"); 33 34 static int io[MAXBOARDS] = { 0x330, 0x334, 0, 0 }; 35 module_param_hw_array(io, int, ioport, NULL, 0); 36 MODULE_PARM_DESC(io, "base IO address of controller (0x130,0x134,0x230,0x234,0x330,0x334, default=0x330,0x334)"); 37 38 /* time AHA spends on the AT-bus during data transfer */ 39 static int bus_on[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 11us */ 40 module_param_array(bus_on, int, NULL, 0); 41 MODULE_PARM_DESC(bus_on, "bus on time [us] (2-15, default=-1 [HW default: 11])"); 42 43 /* time AHA spends off the bus (not to monopolize it) during data transfer */ 44 static int bus_off[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 4us */ 45 module_param_array(bus_off, int, NULL, 0); 46 MODULE_PARM_DESC(bus_off, "bus off time [us] (1-64, default=-1 [HW default: 4])"); 47 48 /* default is jumper selected (J1 on 1542A), factory default = 5 MB/s */ 49 static int dma_speed[MAXBOARDS] = { -1, -1, -1, -1 }; 50 module_param_array(dma_speed, int, NULL, 0); 51 MODULE_PARM_DESC(dma_speed, "DMA speed [MB/s] (5,6,7,8,10, default=-1 [by jumper])"); 52 53 #define BIOS_TRANSLATION_6432 1 /* Default case these days */ 54 #define BIOS_TRANSLATION_25563 2 /* Big disk case */ 55 56 struct aha1542_hostdata { 57 /* This will effectively start both of them at the first mailbox */ 58 int bios_translation; /* Mapping bios uses - for compatibility */ 59 int aha1542_last_mbi_used; 60 int aha1542_last_mbo_used; 61 struct scsi_cmnd *int_cmds[AHA1542_MAILBOXES]; 62 struct mailbox *mb; 63 dma_addr_t mb_handle; 64 struct ccb *ccb; 65 dma_addr_t ccb_handle; 66 }; 67 68 #define AHA1542_MAX_SECTORS 16 69 70 struct aha1542_cmd { 71 /* bounce buffer */ 72 void *data_buffer; 73 dma_addr_t data_buffer_handle; 74 }; 75 76 static inline void aha1542_intr_reset(u16 base) 77 { 78 outb(IRST, CONTROL(base)); 79 } 80 81 static inline bool wait_mask(u16 port, u8 mask, u8 allof, u8 noneof, int timeout) 82 { 83 bool delayed = true; 84 85 if (timeout == 0) { 86 timeout = 3000000; 87 delayed = false; 88 } 89 90 while (1) { 91 u8 bits = inb(port) & mask; 92 if ((bits & allof) == allof && ((bits & noneof) == 0)) 93 break; 94 if (delayed) 95 mdelay(1); 96 if (--timeout == 0) 97 return false; 98 } 99 100 return true; 101 } 102 103 static int aha1542_outb(unsigned int base, u8 val) 104 { 105 if (!wait_mask(STATUS(base), CDF, 0, CDF, 0)) 106 return 1; 107 outb(val, DATA(base)); 108 109 return 0; 110 } 111 112 static int aha1542_out(unsigned int base, u8 *buf, int len) 113 { 114 while (len--) { 115 if (!wait_mask(STATUS(base), CDF, 0, CDF, 0)) 116 return 1; 117 outb(*buf++, DATA(base)); 118 } 119 if (!wait_mask(INTRFLAGS(base), INTRMASK, HACC, 0, 0)) 120 return 1; 121 122 return 0; 123 } 124 125 /* 126 * Only used at boot time, so we do not need to worry about latency as much 127 * here 128 */ 129 130 static int aha1542_in(unsigned int base, u8 *buf, int len, int timeout) 131 { 132 while (len--) { 133 if (!wait_mask(STATUS(base), DF, DF, 0, timeout)) 134 return 1; 135 *buf++ = inb(DATA(base)); 136 } 137 return 0; 138 } 139 140 static int makecode(unsigned hosterr, unsigned scsierr) 141 { 142 switch (hosterr) { 143 case 0x0: 144 case 0xa: /* Linked command complete without error and linked normally */ 145 case 0xb: /* Linked command complete without error, interrupt generated */ 146 hosterr = 0; 147 break; 148 149 case 0x11: /* Selection time out-The initiator selection or target 150 * reselection was not complete within the SCSI Time out period 151 */ 152 hosterr = DID_TIME_OUT; 153 break; 154 155 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data 156 * than was allocated by the Data Length field or the sum of the 157 * Scatter / Gather Data Length fields. 158 */ 159 160 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ 161 162 case 0x15: /* MBO command was not 00, 01 or 02-The first byte of the CB was 163 * invalid. This usually indicates a software failure. 164 */ 165 166 case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid. 167 * This usually indicates a software failure. 168 */ 169 170 case 0x17: /* Linked CCB does not have the same LUN-A subsequent CCB of a set 171 * of linked CCB's does not specify the same logical unit number as 172 * the first. 173 */ 174 case 0x18: /* Invalid Target Direction received from Host-The direction of a 175 * Target Mode CCB was invalid. 176 */ 177 178 case 0x19: /* Duplicate CCB Received in Target Mode-More than once CCB was 179 * received to service data transfer between the same target LUN 180 * and initiator SCSI ID in the same direction. 181 */ 182 183 case 0x1a: /* Invalid CCB or Segment List Parameter-A segment list with a zero 184 * length segment or invalid segment list boundaries was received. 185 * A CCB parameter was invalid. 186 */ 187 #ifdef DEBUG 188 printk("Aha1542: %x %x\n", hosterr, scsierr); 189 #endif 190 hosterr = DID_ERROR; /* Couldn't find any better */ 191 break; 192 193 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus 194 * phase sequence was requested by the target. The host adapter 195 * will generate a SCSI Reset Condition, notifying the host with 196 * a SCRD interrupt 197 */ 198 hosterr = DID_RESET; 199 break; 200 default: 201 printk(KERN_ERR "aha1542: makecode: unknown hoststatus %x\n", hosterr); 202 break; 203 } 204 return scsierr | (hosterr << 16); 205 } 206 207 static int aha1542_test_port(struct Scsi_Host *sh) 208 { 209 int i; 210 211 /* Quick and dirty test for presence of the card. */ 212 if (inb(STATUS(sh->io_port)) == 0xff) 213 return 0; 214 215 /* Reset the adapter. I ought to make a hard reset, but it's not really necessary */ 216 217 /* In case some other card was probing here, reset interrupts */ 218 aha1542_intr_reset(sh->io_port); /* reset interrupts, so they don't block */ 219 220 outb(SRST | IRST /*|SCRST */ , CONTROL(sh->io_port)); 221 222 mdelay(20); /* Wait a little bit for things to settle down. */ 223 224 /* Expect INIT and IDLE, any of the others are bad */ 225 if (!wait_mask(STATUS(sh->io_port), STATMASK, INIT | IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) 226 return 0; 227 228 /* Shouldn't have generated any interrupts during reset */ 229 if (inb(INTRFLAGS(sh->io_port)) & INTRMASK) 230 return 0; 231 232 /* 233 * Perform a host adapter inquiry instead so we do not need to set 234 * up the mailboxes ahead of time 235 */ 236 237 aha1542_outb(sh->io_port, CMD_INQUIRY); 238 239 for (i = 0; i < 4; i++) { 240 if (!wait_mask(STATUS(sh->io_port), DF, DF, 0, 0)) 241 return 0; 242 (void)inb(DATA(sh->io_port)); 243 } 244 245 /* Reading port should reset DF */ 246 if (inb(STATUS(sh->io_port)) & DF) 247 return 0; 248 249 /* When HACC, command is completed, and we're though testing */ 250 if (!wait_mask(INTRFLAGS(sh->io_port), HACC, HACC, 0, 0)) 251 return 0; 252 253 /* Clear interrupts */ 254 outb(IRST, CONTROL(sh->io_port)); 255 256 return 1; 257 } 258 259 static void aha1542_free_cmd(struct scsi_cmnd *cmd) 260 { 261 struct aha1542_cmd *acmd = scsi_cmd_priv(cmd); 262 263 if (cmd->sc_data_direction == DMA_FROM_DEVICE) { 264 struct request *rq = scsi_cmd_to_rq(cmd); 265 void *buf = acmd->data_buffer; 266 struct req_iterator iter; 267 struct bio_vec bv; 268 269 rq_for_each_segment(bv, rq, iter) { 270 memcpy_to_bvec(&bv, buf); 271 buf += bv.bv_len; 272 } 273 } 274 275 scsi_dma_unmap(cmd); 276 } 277 278 static irqreturn_t aha1542_interrupt(int irq, void *dev_id) 279 { 280 struct Scsi_Host *sh = dev_id; 281 struct aha1542_hostdata *aha1542 = shost_priv(sh); 282 int errstatus, mbi, mbo, mbistatus; 283 int number_serviced; 284 unsigned long flags; 285 struct scsi_cmnd *tmp_cmd; 286 int flag; 287 struct mailbox *mb = aha1542->mb; 288 struct ccb *ccb = aha1542->ccb; 289 290 #ifdef DEBUG 291 { 292 flag = inb(INTRFLAGS(sh->io_port)); 293 shost_printk(KERN_DEBUG, sh, "aha1542_intr_handle: "); 294 if (!(flag & ANYINTR)) 295 printk("no interrupt?"); 296 if (flag & MBIF) 297 printk("MBIF "); 298 if (flag & MBOA) 299 printk("MBOF "); 300 if (flag & HACC) 301 printk("HACC "); 302 if (flag & SCRD) 303 printk("SCRD "); 304 printk("status %02x\n", inb(STATUS(sh->io_port))); 305 } 306 #endif 307 number_serviced = 0; 308 309 spin_lock_irqsave(sh->host_lock, flags); 310 while (1) { 311 flag = inb(INTRFLAGS(sh->io_port)); 312 313 /* 314 * Check for unusual interrupts. If any of these happen, we should 315 * probably do something special, but for now just printing a message 316 * is sufficient. A SCSI reset detected is something that we really 317 * need to deal with in some way. 318 */ 319 if (flag & ~MBIF) { 320 if (flag & MBOA) 321 printk("MBOF "); 322 if (flag & HACC) 323 printk("HACC "); 324 if (flag & SCRD) 325 printk("SCRD "); 326 } 327 aha1542_intr_reset(sh->io_port); 328 329 mbi = aha1542->aha1542_last_mbi_used + 1; 330 if (mbi >= 2 * AHA1542_MAILBOXES) 331 mbi = AHA1542_MAILBOXES; 332 333 do { 334 if (mb[mbi].status != 0) 335 break; 336 mbi++; 337 if (mbi >= 2 * AHA1542_MAILBOXES) 338 mbi = AHA1542_MAILBOXES; 339 } while (mbi != aha1542->aha1542_last_mbi_used); 340 341 if (mb[mbi].status == 0) { 342 spin_unlock_irqrestore(sh->host_lock, flags); 343 /* Hmm, no mail. Must have read it the last time around */ 344 if (!number_serviced) 345 shost_printk(KERN_WARNING, sh, "interrupt received, but no mail.\n"); 346 return IRQ_HANDLED; 347 } 348 349 mbo = (scsi2int(mb[mbi].ccbptr) - (unsigned long)aha1542->ccb_handle) / sizeof(struct ccb); 350 mbistatus = mb[mbi].status; 351 mb[mbi].status = 0; 352 aha1542->aha1542_last_mbi_used = mbi; 353 354 #ifdef DEBUG 355 if (ccb[mbo].tarstat | ccb[mbo].hastat) 356 shost_printk(KERN_DEBUG, sh, "aha1542_command: returning %x (status %d)\n", 357 ccb[mbo].tarstat + ((int) ccb[mbo].hastat << 16), mb[mbi].status); 358 #endif 359 360 if (mbistatus == 3) 361 continue; /* Aborted command not found */ 362 363 #ifdef DEBUG 364 shost_printk(KERN_DEBUG, sh, "...done %d %d\n", mbo, mbi); 365 #endif 366 367 tmp_cmd = aha1542->int_cmds[mbo]; 368 369 if (!tmp_cmd) { 370 spin_unlock_irqrestore(sh->host_lock, flags); 371 shost_printk(KERN_WARNING, sh, "Unexpected interrupt\n"); 372 shost_printk(KERN_WARNING, sh, "tarstat=%x, hastat=%x idlun=%x ccb#=%d\n", ccb[mbo].tarstat, 373 ccb[mbo].hastat, ccb[mbo].idlun, mbo); 374 return IRQ_HANDLED; 375 } 376 aha1542_free_cmd(tmp_cmd); 377 /* 378 * Fetch the sense data, and tuck it away, in the required slot. The 379 * Adaptec automatically fetches it, and there is no guarantee that 380 * we will still have it in the cdb when we come back 381 */ 382 if (ccb[mbo].tarstat == 2) 383 memcpy(tmp_cmd->sense_buffer, &ccb[mbo].cdb[ccb[mbo].cdblen], 384 SCSI_SENSE_BUFFERSIZE); 385 386 387 /* is there mail :-) */ 388 389 /* more error checking left out here */ 390 if (mbistatus != 1) 391 /* This is surely wrong, but I don't know what's right */ 392 errstatus = makecode(ccb[mbo].hastat, ccb[mbo].tarstat); 393 else 394 errstatus = 0; 395 396 #ifdef DEBUG 397 if (errstatus) 398 shost_printk(KERN_DEBUG, sh, "(aha1542 error:%x %x %x) ", errstatus, 399 ccb[mbo].hastat, ccb[mbo].tarstat); 400 if (ccb[mbo].tarstat == 2) 401 print_hex_dump_bytes("sense: ", DUMP_PREFIX_NONE, &ccb[mbo].cdb[ccb[mbo].cdblen], 12); 402 if (errstatus) 403 printk("aha1542_intr_handle: returning %6x\n", errstatus); 404 #endif 405 tmp_cmd->result = errstatus; 406 aha1542->int_cmds[mbo] = NULL; /* This effectively frees up the mailbox slot, as 407 * far as queuecommand is concerned 408 */ 409 scsi_done(tmp_cmd); 410 number_serviced++; 411 } 412 } 413 414 static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd) 415 { 416 struct aha1542_cmd *acmd = scsi_cmd_priv(cmd); 417 struct aha1542_hostdata *aha1542 = shost_priv(sh); 418 u8 direction; 419 u8 target = cmd->device->id; 420 u8 lun = cmd->device->lun; 421 unsigned long flags; 422 int bufflen = scsi_bufflen(cmd); 423 int mbo; 424 struct mailbox *mb = aha1542->mb; 425 struct ccb *ccb = aha1542->ccb; 426 427 if (*cmd->cmnd == REQUEST_SENSE) { 428 /* Don't do the command - we have the sense data already */ 429 cmd->result = 0; 430 scsi_done(cmd); 431 return 0; 432 } 433 #ifdef DEBUG 434 { 435 int i = -1; 436 if (*cmd->cmnd == READ_10 || *cmd->cmnd == WRITE_10) 437 i = xscsi2int(cmd->cmnd + 2); 438 else if (*cmd->cmnd == READ_6 || *cmd->cmnd == WRITE_6) 439 i = scsi2int(cmd->cmnd + 2); 440 shost_printk(KERN_DEBUG, sh, "aha1542_queuecommand: dev %d cmd %02x pos %d len %d", 441 target, *cmd->cmnd, i, bufflen); 442 print_hex_dump_bytes("command: ", DUMP_PREFIX_NONE, cmd->cmnd, cmd->cmd_len); 443 } 444 #endif 445 446 if (cmd->sc_data_direction == DMA_TO_DEVICE) { 447 struct request *rq = scsi_cmd_to_rq(cmd); 448 void *buf = acmd->data_buffer; 449 struct req_iterator iter; 450 struct bio_vec bv; 451 452 rq_for_each_segment(bv, rq, iter) { 453 memcpy_from_bvec(buf, &bv); 454 buf += bv.bv_len; 455 } 456 } 457 458 /* 459 * Use the outgoing mailboxes in a round-robin fashion, because this 460 * is how the host adapter will scan for them 461 */ 462 463 spin_lock_irqsave(sh->host_lock, flags); 464 mbo = aha1542->aha1542_last_mbo_used + 1; 465 if (mbo >= AHA1542_MAILBOXES) 466 mbo = 0; 467 468 do { 469 if (mb[mbo].status == 0 && aha1542->int_cmds[mbo] == NULL) 470 break; 471 mbo++; 472 if (mbo >= AHA1542_MAILBOXES) 473 mbo = 0; 474 } while (mbo != aha1542->aha1542_last_mbo_used); 475 476 if (mb[mbo].status || aha1542->int_cmds[mbo]) 477 panic("Unable to find empty mailbox for aha1542.\n"); 478 479 aha1542->int_cmds[mbo] = cmd; /* This will effectively prevent someone else from 480 * screwing with this cdb. 481 */ 482 483 aha1542->aha1542_last_mbo_used = mbo; 484 485 #ifdef DEBUG 486 shost_printk(KERN_DEBUG, sh, "Sending command (%d)...", mbo); 487 #endif 488 489 /* This gets trashed for some reason */ 490 any2scsi(mb[mbo].ccbptr, aha1542->ccb_handle + mbo * sizeof(*ccb)); 491 492 memset(&ccb[mbo], 0, sizeof(struct ccb)); 493 494 ccb[mbo].cdblen = cmd->cmd_len; 495 496 direction = 0; 497 if (*cmd->cmnd == READ_10 || *cmd->cmnd == READ_6) 498 direction = 8; 499 else if (*cmd->cmnd == WRITE_10 || *cmd->cmnd == WRITE_6) 500 direction = 16; 501 502 memcpy(ccb[mbo].cdb, cmd->cmnd, ccb[mbo].cdblen); 503 ccb[mbo].op = 0; /* SCSI Initiator Command */ 504 any2scsi(ccb[mbo].datalen, bufflen); 505 if (bufflen) 506 any2scsi(ccb[mbo].dataptr, acmd->data_buffer_handle); 507 else 508 any2scsi(ccb[mbo].dataptr, 0); 509 ccb[mbo].idlun = (target & 7) << 5 | direction | (lun & 7); /*SCSI Target Id */ 510 ccb[mbo].rsalen = 16; 511 ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0; 512 ccb[mbo].commlinkid = 0; 513 514 #ifdef DEBUG 515 print_hex_dump_bytes("sending: ", DUMP_PREFIX_NONE, &ccb[mbo], sizeof(ccb[mbo]) - 10); 516 printk("aha1542_queuecommand: now waiting for interrupt "); 517 #endif 518 mb[mbo].status = 1; 519 aha1542_outb(cmd->device->host->io_port, CMD_START_SCSI); 520 spin_unlock_irqrestore(sh->host_lock, flags); 521 522 return 0; 523 } 524 525 /* Initialize mailboxes */ 526 static void setup_mailboxes(struct Scsi_Host *sh) 527 { 528 struct aha1542_hostdata *aha1542 = shost_priv(sh); 529 u8 mb_cmd[5] = { CMD_MBINIT, AHA1542_MAILBOXES, 0, 0, 0}; 530 int i; 531 532 for (i = 0; i < AHA1542_MAILBOXES; i++) { 533 aha1542->mb[i].status = 0; 534 any2scsi(aha1542->mb[i].ccbptr, 535 aha1542->ccb_handle + i * sizeof(struct ccb)); 536 aha1542->mb[AHA1542_MAILBOXES + i].status = 0; 537 } 538 aha1542_intr_reset(sh->io_port); /* reset interrupts, so they don't block */ 539 any2scsi(mb_cmd + 2, aha1542->mb_handle); 540 if (aha1542_out(sh->io_port, mb_cmd, 5)) 541 shost_printk(KERN_ERR, sh, "failed setting up mailboxes\n"); 542 aha1542_intr_reset(sh->io_port); 543 } 544 545 static int aha1542_getconfig(struct Scsi_Host *sh) 546 { 547 u8 inquiry_result[3]; 548 int i; 549 i = inb(STATUS(sh->io_port)); 550 if (i & DF) { 551 i = inb(DATA(sh->io_port)); 552 } 553 aha1542_outb(sh->io_port, CMD_RETCONF); 554 aha1542_in(sh->io_port, inquiry_result, 3, 0); 555 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0)) 556 shost_printk(KERN_ERR, sh, "error querying board settings\n"); 557 aha1542_intr_reset(sh->io_port); 558 switch (inquiry_result[0]) { 559 case 0x80: 560 sh->dma_channel = 7; 561 break; 562 case 0x40: 563 sh->dma_channel = 6; 564 break; 565 case 0x20: 566 sh->dma_channel = 5; 567 break; 568 case 0x01: 569 sh->dma_channel = 0; 570 break; 571 case 0: 572 /* 573 * This means that the adapter, although Adaptec 1542 compatible, doesn't use a DMA channel. 574 * Currently only aware of the BusLogic BT-445S VL-Bus adapter which needs this. 575 */ 576 sh->dma_channel = 0xFF; 577 break; 578 default: 579 shost_printk(KERN_ERR, sh, "Unable to determine DMA channel.\n"); 580 return -1; 581 } 582 switch (inquiry_result[1]) { 583 case 0x40: 584 sh->irq = 15; 585 break; 586 case 0x20: 587 sh->irq = 14; 588 break; 589 case 0x8: 590 sh->irq = 12; 591 break; 592 case 0x4: 593 sh->irq = 11; 594 break; 595 case 0x2: 596 sh->irq = 10; 597 break; 598 case 0x1: 599 sh->irq = 9; 600 break; 601 default: 602 shost_printk(KERN_ERR, sh, "Unable to determine IRQ level.\n"); 603 return -1; 604 } 605 sh->this_id = inquiry_result[2] & 7; 606 return 0; 607 } 608 609 /* 610 * This function should only be called for 1542C boards - we can detect 611 * the special firmware settings and unlock the board 612 */ 613 614 static int aha1542_mbenable(struct Scsi_Host *sh) 615 { 616 static u8 mbenable_cmd[3]; 617 static u8 mbenable_result[2]; 618 int retval; 619 620 retval = BIOS_TRANSLATION_6432; 621 622 aha1542_outb(sh->io_port, CMD_EXTBIOS); 623 if (aha1542_in(sh->io_port, mbenable_result, 2, 100)) 624 return retval; 625 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 100)) 626 goto fail; 627 aha1542_intr_reset(sh->io_port); 628 629 if ((mbenable_result[0] & 0x08) || mbenable_result[1]) { 630 mbenable_cmd[0] = CMD_MBENABLE; 631 mbenable_cmd[1] = 0; 632 mbenable_cmd[2] = mbenable_result[1]; 633 634 if ((mbenable_result[0] & 0x08) && (mbenable_result[1] & 0x03)) 635 retval = BIOS_TRANSLATION_25563; 636 637 if (aha1542_out(sh->io_port, mbenable_cmd, 3)) 638 goto fail; 639 } 640 while (0) { 641 fail: 642 shost_printk(KERN_ERR, sh, "Mailbox init failed\n"); 643 } 644 aha1542_intr_reset(sh->io_port); 645 return retval; 646 } 647 648 /* Query the board to find out if it is a 1542 or a 1740, or whatever. */ 649 static int aha1542_query(struct Scsi_Host *sh) 650 { 651 struct aha1542_hostdata *aha1542 = shost_priv(sh); 652 u8 inquiry_result[4]; 653 int i; 654 i = inb(STATUS(sh->io_port)); 655 if (i & DF) { 656 i = inb(DATA(sh->io_port)); 657 } 658 aha1542_outb(sh->io_port, CMD_INQUIRY); 659 aha1542_in(sh->io_port, inquiry_result, 4, 0); 660 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0)) 661 shost_printk(KERN_ERR, sh, "error querying card type\n"); 662 aha1542_intr_reset(sh->io_port); 663 664 aha1542->bios_translation = BIOS_TRANSLATION_6432; /* Default case */ 665 666 /* 667 * For an AHA1740 series board, we ignore the board since there is a 668 * hardware bug which can lead to wrong blocks being returned if the board 669 * is operating in the 1542 emulation mode. Since there is an extended mode 670 * driver, we simply ignore the board and let the 1740 driver pick it up. 671 */ 672 673 if (inquiry_result[0] == 0x43) { 674 shost_printk(KERN_INFO, sh, "Emulation mode not supported for AHA-1740 hardware, use aha1740 driver instead.\n"); 675 return 1; 676 } 677 678 /* 679 * Always call this - boards that do not support extended bios translation 680 * will ignore the command, and we will set the proper default 681 */ 682 683 aha1542->bios_translation = aha1542_mbenable(sh); 684 685 return 0; 686 } 687 688 static u8 dma_speed_hw(int dma_speed) 689 { 690 switch (dma_speed) { 691 case 5: 692 return 0x00; 693 case 6: 694 return 0x04; 695 case 7: 696 return 0x01; 697 case 8: 698 return 0x02; 699 case 10: 700 return 0x03; 701 } 702 703 return 0xff; /* invalid */ 704 } 705 706 /* Set the Bus on/off-times as not to ruin floppy performance */ 707 static void aha1542_set_bus_times(struct Scsi_Host *sh, int bus_on, int bus_off, int dma_speed) 708 { 709 if (bus_on > 0) { 710 u8 oncmd[] = { CMD_BUSON_TIME, clamp(bus_on, 2, 15) }; 711 712 aha1542_intr_reset(sh->io_port); 713 if (aha1542_out(sh->io_port, oncmd, 2)) 714 goto fail; 715 } 716 717 if (bus_off > 0) { 718 u8 offcmd[] = { CMD_BUSOFF_TIME, clamp(bus_off, 1, 64) }; 719 720 aha1542_intr_reset(sh->io_port); 721 if (aha1542_out(sh->io_port, offcmd, 2)) 722 goto fail; 723 } 724 725 if (dma_speed_hw(dma_speed) != 0xff) { 726 u8 dmacmd[] = { CMD_DMASPEED, dma_speed_hw(dma_speed) }; 727 728 aha1542_intr_reset(sh->io_port); 729 if (aha1542_out(sh->io_port, dmacmd, 2)) 730 goto fail; 731 } 732 aha1542_intr_reset(sh->io_port); 733 return; 734 fail: 735 shost_printk(KERN_ERR, sh, "setting bus on/off-time failed\n"); 736 aha1542_intr_reset(sh->io_port); 737 } 738 739 /* return non-zero on detection */ 740 static struct Scsi_Host *aha1542_hw_init(const struct scsi_host_template *tpnt, 741 struct device *pdev, int indx) 742 { 743 unsigned int base_io = io[indx]; 744 struct Scsi_Host *sh; 745 struct aha1542_hostdata *aha1542; 746 char dma_info[] = "no DMA"; 747 748 if (base_io == 0) 749 return NULL; 750 751 if (!request_region(base_io, AHA1542_REGION_SIZE, "aha1542")) 752 return NULL; 753 754 sh = scsi_host_alloc(tpnt, sizeof(struct aha1542_hostdata)); 755 if (!sh) 756 goto release; 757 aha1542 = shost_priv(sh); 758 759 sh->unique_id = base_io; 760 sh->io_port = base_io; 761 sh->n_io_port = AHA1542_REGION_SIZE; 762 aha1542->aha1542_last_mbi_used = 2 * AHA1542_MAILBOXES - 1; 763 aha1542->aha1542_last_mbo_used = AHA1542_MAILBOXES - 1; 764 765 if (!aha1542_test_port(sh)) 766 goto unregister; 767 768 aha1542_set_bus_times(sh, bus_on[indx], bus_off[indx], dma_speed[indx]); 769 if (aha1542_query(sh)) 770 goto unregister; 771 if (aha1542_getconfig(sh) == -1) 772 goto unregister; 773 774 if (sh->dma_channel != 0xFF) 775 snprintf(dma_info, sizeof(dma_info), "DMA %d", sh->dma_channel); 776 shost_printk(KERN_INFO, sh, "Adaptec AHA-1542 (SCSI-ID %d) at IO 0x%x, IRQ %d, %s\n", 777 sh->this_id, base_io, sh->irq, dma_info); 778 if (aha1542->bios_translation == BIOS_TRANSLATION_25563) 779 shost_printk(KERN_INFO, sh, "Using extended bios translation\n"); 780 781 if (dma_set_mask_and_coherent(pdev, DMA_BIT_MASK(24)) < 0) 782 goto unregister; 783 784 aha1542->mb = dma_alloc_coherent(pdev, 785 AHA1542_MAILBOXES * 2 * sizeof(struct mailbox), 786 &aha1542->mb_handle, GFP_KERNEL); 787 if (!aha1542->mb) 788 goto unregister; 789 790 aha1542->ccb = dma_alloc_coherent(pdev, 791 AHA1542_MAILBOXES * sizeof(struct ccb), 792 &aha1542->ccb_handle, GFP_KERNEL); 793 if (!aha1542->ccb) 794 goto free_mb; 795 796 setup_mailboxes(sh); 797 798 if (request_irq(sh->irq, aha1542_interrupt, 0, "aha1542", sh)) { 799 shost_printk(KERN_ERR, sh, "Unable to allocate IRQ.\n"); 800 goto free_ccb; 801 } 802 if (sh->dma_channel != 0xFF) { 803 if (request_dma(sh->dma_channel, "aha1542")) { 804 shost_printk(KERN_ERR, sh, "Unable to allocate DMA channel.\n"); 805 goto free_irq; 806 } 807 if (sh->dma_channel == 0 || sh->dma_channel >= 5) { 808 set_dma_mode(sh->dma_channel, DMA_MODE_CASCADE); 809 enable_dma(sh->dma_channel); 810 } 811 } 812 813 if (scsi_add_host(sh, pdev)) 814 goto free_dma; 815 816 scsi_scan_host(sh); 817 818 return sh; 819 820 free_dma: 821 if (sh->dma_channel != 0xff) 822 free_dma(sh->dma_channel); 823 free_irq: 824 free_irq(sh->irq, sh); 825 free_ccb: 826 dma_free_coherent(pdev, AHA1542_MAILBOXES * sizeof(struct ccb), 827 aha1542->ccb, aha1542->ccb_handle); 828 free_mb: 829 dma_free_coherent(pdev, AHA1542_MAILBOXES * 2 * sizeof(struct mailbox), 830 aha1542->mb, aha1542->mb_handle); 831 unregister: 832 scsi_host_put(sh); 833 release: 834 release_region(base_io, AHA1542_REGION_SIZE); 835 836 return NULL; 837 } 838 839 static int aha1542_release(struct Scsi_Host *sh) 840 { 841 struct aha1542_hostdata *aha1542 = shost_priv(sh); 842 struct device *dev = sh->dma_dev; 843 844 scsi_remove_host(sh); 845 if (sh->dma_channel != 0xff) 846 free_dma(sh->dma_channel); 847 dma_free_coherent(dev, AHA1542_MAILBOXES * sizeof(struct ccb), 848 aha1542->ccb, aha1542->ccb_handle); 849 dma_free_coherent(dev, AHA1542_MAILBOXES * 2 * sizeof(struct mailbox), 850 aha1542->mb, aha1542->mb_handle); 851 if (sh->irq) 852 free_irq(sh->irq, sh); 853 if (sh->io_port && sh->n_io_port) 854 release_region(sh->io_port, sh->n_io_port); 855 scsi_host_put(sh); 856 return 0; 857 } 858 859 860 /* 861 * This is a device reset. This is handled by sending a special command 862 * to the device. 863 */ 864 static int aha1542_dev_reset(struct scsi_cmnd *cmd) 865 { 866 struct Scsi_Host *sh = cmd->device->host; 867 struct aha1542_hostdata *aha1542 = shost_priv(sh); 868 unsigned long flags; 869 struct mailbox *mb = aha1542->mb; 870 u8 target = cmd->device->id; 871 u8 lun = cmd->device->lun; 872 int mbo; 873 struct ccb *ccb = aha1542->ccb; 874 875 spin_lock_irqsave(sh->host_lock, flags); 876 mbo = aha1542->aha1542_last_mbo_used + 1; 877 if (mbo >= AHA1542_MAILBOXES) 878 mbo = 0; 879 880 do { 881 if (mb[mbo].status == 0 && aha1542->int_cmds[mbo] == NULL) 882 break; 883 mbo++; 884 if (mbo >= AHA1542_MAILBOXES) 885 mbo = 0; 886 } while (mbo != aha1542->aha1542_last_mbo_used); 887 888 if (mb[mbo].status || aha1542->int_cmds[mbo]) 889 panic("Unable to find empty mailbox for aha1542.\n"); 890 891 aha1542->int_cmds[mbo] = cmd; /* This will effectively 892 * prevent someone else from 893 * screwing with this cdb. 894 */ 895 896 aha1542->aha1542_last_mbo_used = mbo; 897 898 /* This gets trashed for some reason */ 899 any2scsi(mb[mbo].ccbptr, aha1542->ccb_handle + mbo * sizeof(*ccb)); 900 901 memset(&ccb[mbo], 0, sizeof(struct ccb)); 902 903 ccb[mbo].op = 0x81; /* BUS DEVICE RESET */ 904 905 ccb[mbo].idlun = (target & 7) << 5 | (lun & 7); /*SCSI Target Id */ 906 907 ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0; 908 ccb[mbo].commlinkid = 0; 909 910 /* 911 * Now tell the 1542 to flush all pending commands for this 912 * target 913 */ 914 aha1542_outb(sh->io_port, CMD_START_SCSI); 915 spin_unlock_irqrestore(sh->host_lock, flags); 916 917 scmd_printk(KERN_WARNING, cmd, 918 "Trying device reset for target\n"); 919 920 return SUCCESS; 921 } 922 923 static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd) 924 { 925 struct Scsi_Host *sh = cmd->device->host; 926 struct aha1542_hostdata *aha1542 = shost_priv(sh); 927 unsigned long flags; 928 int i; 929 930 spin_lock_irqsave(sh->host_lock, flags); 931 /* 932 * This does a scsi reset for all devices on the bus. 933 * In principle, we could also reset the 1542 - should 934 * we do this? Try this first, and we can add that later 935 * if it turns out to be useful. 936 */ 937 outb(reset_cmd, CONTROL(cmd->device->host->io_port)); 938 939 if (!wait_mask(STATUS(cmd->device->host->io_port), 940 STATMASK, IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) { 941 spin_unlock_irqrestore(sh->host_lock, flags); 942 return FAILED; 943 } 944 945 /* 946 * We need to do this too before the 1542 can interact with 947 * us again after host reset. 948 */ 949 if (reset_cmd & HRST) 950 setup_mailboxes(cmd->device->host); 951 952 /* 953 * Now try to pick up the pieces. For all pending commands, 954 * free any internal data structures, and basically clear things 955 * out. We do not try and restart any commands or anything - 956 * the strategy handler takes care of that crap. 957 */ 958 shost_printk(KERN_WARNING, cmd->device->host, "Sent BUS RESET to scsi host %d\n", cmd->device->host->host_no); 959 960 for (i = 0; i < AHA1542_MAILBOXES; i++) { 961 if (aha1542->int_cmds[i] != NULL) { 962 struct scsi_cmnd *tmp_cmd; 963 tmp_cmd = aha1542->int_cmds[i]; 964 965 if (tmp_cmd->device->soft_reset) { 966 /* 967 * If this device implements the soft reset option, 968 * then it is still holding onto the command, and 969 * may yet complete it. In this case, we don't 970 * flush the data. 971 */ 972 continue; 973 } 974 aha1542_free_cmd(tmp_cmd); 975 aha1542->int_cmds[i] = NULL; 976 aha1542->mb[i].status = 0; 977 } 978 } 979 980 spin_unlock_irqrestore(sh->host_lock, flags); 981 return SUCCESS; 982 } 983 984 static int aha1542_bus_reset(struct scsi_cmnd *cmd) 985 { 986 return aha1542_reset(cmd, SCRST); 987 } 988 989 static int aha1542_host_reset(struct scsi_cmnd *cmd) 990 { 991 return aha1542_reset(cmd, HRST | SCRST); 992 } 993 994 static int aha1542_biosparam(struct scsi_device *sdev, 995 struct block_device *bdev, sector_t capacity, int geom[]) 996 { 997 struct aha1542_hostdata *aha1542 = shost_priv(sdev->host); 998 999 if (capacity >= 0x200000 && 1000 aha1542->bios_translation == BIOS_TRANSLATION_25563) { 1001 /* Please verify that this is the same as what DOS returns */ 1002 geom[0] = 255; /* heads */ 1003 geom[1] = 63; /* sectors */ 1004 } else { 1005 geom[0] = 64; /* heads */ 1006 geom[1] = 32; /* sectors */ 1007 } 1008 geom[2] = sector_div(capacity, geom[0] * geom[1]); /* cylinders */ 1009 1010 return 0; 1011 } 1012 MODULE_LICENSE("GPL"); 1013 1014 static int aha1542_init_cmd_priv(struct Scsi_Host *shost, struct scsi_cmnd *cmd) 1015 { 1016 struct aha1542_cmd *acmd = scsi_cmd_priv(cmd); 1017 1018 acmd->data_buffer = dma_alloc_coherent(shost->dma_dev, 1019 SECTOR_SIZE * AHA1542_MAX_SECTORS, 1020 &acmd->data_buffer_handle, GFP_KERNEL); 1021 if (!acmd->data_buffer) 1022 return -ENOMEM; 1023 return 0; 1024 } 1025 1026 static int aha1542_exit_cmd_priv(struct Scsi_Host *shost, struct scsi_cmnd *cmd) 1027 { 1028 struct aha1542_cmd *acmd = scsi_cmd_priv(cmd); 1029 1030 dma_free_coherent(shost->dma_dev, SECTOR_SIZE * AHA1542_MAX_SECTORS, 1031 acmd->data_buffer, acmd->data_buffer_handle); 1032 return 0; 1033 } 1034 1035 static const struct scsi_host_template driver_template = { 1036 .module = THIS_MODULE, 1037 .proc_name = "aha1542", 1038 .name = "Adaptec 1542", 1039 .cmd_size = sizeof(struct aha1542_cmd), 1040 .queuecommand = aha1542_queuecommand, 1041 .eh_device_reset_handler= aha1542_dev_reset, 1042 .eh_bus_reset_handler = aha1542_bus_reset, 1043 .eh_host_reset_handler = aha1542_host_reset, 1044 .bios_param = aha1542_biosparam, 1045 .init_cmd_priv = aha1542_init_cmd_priv, 1046 .exit_cmd_priv = aha1542_exit_cmd_priv, 1047 .can_queue = AHA1542_MAILBOXES, 1048 .this_id = 7, 1049 .max_sectors = AHA1542_MAX_SECTORS, 1050 .sg_tablesize = SG_ALL, 1051 }; 1052 1053 static int aha1542_isa_match(struct device *pdev, unsigned int ndev) 1054 { 1055 struct Scsi_Host *sh = aha1542_hw_init(&driver_template, pdev, ndev); 1056 1057 if (!sh) 1058 return 0; 1059 1060 dev_set_drvdata(pdev, sh); 1061 return 1; 1062 } 1063 1064 static void aha1542_isa_remove(struct device *pdev, 1065 unsigned int ndev) 1066 { 1067 aha1542_release(dev_get_drvdata(pdev)); 1068 dev_set_drvdata(pdev, NULL); 1069 } 1070 1071 static struct isa_driver aha1542_isa_driver = { 1072 .match = aha1542_isa_match, 1073 .remove = aha1542_isa_remove, 1074 .driver = { 1075 .name = "aha1542" 1076 }, 1077 }; 1078 static int isa_registered; 1079 1080 #ifdef CONFIG_PNP 1081 static const struct pnp_device_id aha1542_pnp_ids[] = { 1082 { .id = "ADP1542" }, 1083 { .id = "" } 1084 }; 1085 MODULE_DEVICE_TABLE(pnp, aha1542_pnp_ids); 1086 1087 static int aha1542_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id) 1088 { 1089 int indx; 1090 struct Scsi_Host *sh; 1091 1092 for (indx = 0; indx < ARRAY_SIZE(io); indx++) { 1093 if (io[indx]) 1094 continue; 1095 1096 if (pnp_activate_dev(pdev) < 0) 1097 continue; 1098 1099 io[indx] = pnp_port_start(pdev, 0); 1100 1101 /* 1102 * The card can be queried for its DMA, we have 1103 * the DMA set up that is enough 1104 */ 1105 1106 dev_info(&pdev->dev, "ISAPnP found an AHA1535 at I/O 0x%03X", io[indx]); 1107 } 1108 1109 sh = aha1542_hw_init(&driver_template, &pdev->dev, indx); 1110 if (!sh) 1111 return -ENODEV; 1112 1113 pnp_set_drvdata(pdev, sh); 1114 return 0; 1115 } 1116 1117 static void aha1542_pnp_remove(struct pnp_dev *pdev) 1118 { 1119 aha1542_release(pnp_get_drvdata(pdev)); 1120 pnp_set_drvdata(pdev, NULL); 1121 } 1122 1123 static struct pnp_driver aha1542_pnp_driver = { 1124 .name = "aha1542", 1125 .id_table = aha1542_pnp_ids, 1126 .probe = aha1542_pnp_probe, 1127 .remove = aha1542_pnp_remove, 1128 }; 1129 static int pnp_registered; 1130 #endif /* CONFIG_PNP */ 1131 1132 static int __init aha1542_init(void) 1133 { 1134 int ret = 0; 1135 1136 #ifdef CONFIG_PNP 1137 if (isapnp) { 1138 ret = pnp_register_driver(&aha1542_pnp_driver); 1139 if (!ret) 1140 pnp_registered = 1; 1141 } 1142 #endif 1143 ret = isa_register_driver(&aha1542_isa_driver, MAXBOARDS); 1144 if (!ret) 1145 isa_registered = 1; 1146 1147 #ifdef CONFIG_PNP 1148 if (pnp_registered) 1149 ret = 0; 1150 #endif 1151 if (isa_registered) 1152 ret = 0; 1153 1154 return ret; 1155 } 1156 1157 static void __exit aha1542_exit(void) 1158 { 1159 #ifdef CONFIG_PNP 1160 if (pnp_registered) 1161 pnp_unregister_driver(&aha1542_pnp_driver); 1162 #endif 1163 if (isa_registered) 1164 isa_unregister_driver(&aha1542_isa_driver); 1165 } 1166 1167 module_init(aha1542_init); 1168 module_exit(aha1542_exit); 1169