1 /* 2 * Adaptec AAC series RAID controller driver 3 * (c) Copyright 2001 Red Hat Inc. 4 * 5 * based on the old aacraid driver that is.. 6 * Adaptec aacraid device driver for Linux. 7 * 8 * Copyright (c) 2000-2010 Adaptec, Inc. 9 * 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2, or (at your option) 14 * any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; see the file COPYING. If not, write to 23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 24 * 25 * Module Name: 26 * sa.c 27 * 28 * Abstract: Drawbridge specific support functions 29 * 30 */ 31 32 #include <linux/kernel.h> 33 #include <linux/init.h> 34 #include <linux/types.h> 35 #include <linux/pci.h> 36 #include <linux/spinlock.h> 37 #include <linux/blkdev.h> 38 #include <linux/delay.h> 39 #include <linux/completion.h> 40 #include <linux/time.h> 41 #include <linux/interrupt.h> 42 43 #include <scsi/scsi_host.h> 44 45 #include "aacraid.h" 46 47 static irqreturn_t aac_sa_intr(int irq, void *dev_id) 48 { 49 struct aac_dev *dev = dev_id; 50 unsigned short intstat, mask; 51 52 intstat = sa_readw(dev, DoorbellReg_p); 53 /* 54 * Read mask and invert because drawbridge is reversed. 55 * This allows us to only service interrupts that have been enabled. 56 */ 57 mask = ~(sa_readw(dev, SaDbCSR.PRISETIRQMASK)); 58 59 /* Check to see if this is our interrupt. If it isn't just return */ 60 61 if (intstat & mask) { 62 if (intstat & PrintfReady) { 63 aac_printf(dev, sa_readl(dev, Mailbox5)); 64 sa_writew(dev, DoorbellClrReg_p, PrintfReady); /* clear PrintfReady */ 65 sa_writew(dev, DoorbellReg_s, PrintfDone); 66 } else if (intstat & DOORBELL_1) { // dev -> Host Normal Command Ready 67 sa_writew(dev, DoorbellClrReg_p, DOORBELL_1); 68 aac_command_normal(&dev->queues->queue[HostNormCmdQueue]); 69 } else if (intstat & DOORBELL_2) { // dev -> Host Normal Response Ready 70 sa_writew(dev, DoorbellClrReg_p, DOORBELL_2); 71 aac_response_normal(&dev->queues->queue[HostNormRespQueue]); 72 } else if (intstat & DOORBELL_3) { // dev -> Host Normal Command Not Full 73 sa_writew(dev, DoorbellClrReg_p, DOORBELL_3); 74 } else if (intstat & DOORBELL_4) { // dev -> Host Normal Response Not Full 75 sa_writew(dev, DoorbellClrReg_p, DOORBELL_4); 76 } 77 return IRQ_HANDLED; 78 } 79 return IRQ_NONE; 80 } 81 82 /** 83 * aac_sa_disable_interrupt - disable interrupt 84 * @dev: Which adapter to enable. 85 */ 86 87 static void aac_sa_disable_interrupt (struct aac_dev *dev) 88 { 89 sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff); 90 } 91 92 /** 93 * aac_sa_enable_interrupt - enable interrupt 94 * @dev: Which adapter to enable. 95 */ 96 97 static void aac_sa_enable_interrupt (struct aac_dev *dev) 98 { 99 sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | 100 DOORBELL_2 | DOORBELL_3 | DOORBELL_4)); 101 } 102 103 /** 104 * aac_sa_notify_adapter - handle adapter notification 105 * @dev: Adapter that notification is for 106 * @event: Event to notidy 107 * 108 * Notify the adapter of an event 109 */ 110 111 static void aac_sa_notify_adapter(struct aac_dev *dev, u32 event) 112 { 113 switch (event) { 114 115 case AdapNormCmdQue: 116 sa_writew(dev, DoorbellReg_s,DOORBELL_1); 117 break; 118 case HostNormRespNotFull: 119 sa_writew(dev, DoorbellReg_s,DOORBELL_4); 120 break; 121 case AdapNormRespQue: 122 sa_writew(dev, DoorbellReg_s,DOORBELL_2); 123 break; 124 case HostNormCmdNotFull: 125 sa_writew(dev, DoorbellReg_s,DOORBELL_3); 126 break; 127 case HostShutdown: 128 /* 129 sa_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, 130 NULL, NULL, NULL, NULL, NULL); 131 */ 132 break; 133 case FastIo: 134 sa_writew(dev, DoorbellReg_s,DOORBELL_6); 135 break; 136 case AdapPrintfDone: 137 sa_writew(dev, DoorbellReg_s,DOORBELL_5); 138 break; 139 default: 140 BUG(); 141 break; 142 } 143 } 144 145 146 /** 147 * sa_sync_cmd - send a command and wait 148 * @dev: Adapter 149 * @command: Command to execute 150 * @p1: first parameter 151 * @ret: adapter status 152 * 153 * This routine will send a synchronous command to the adapter and wait 154 * for its completion. 155 */ 156 157 static int sa_sync_cmd(struct aac_dev *dev, u32 command, 158 u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, 159 u32 *ret, u32 *r1, u32 *r2, u32 *r3, u32 *r4) 160 { 161 unsigned long start; 162 int ok; 163 /* 164 * Write the Command into Mailbox 0 165 */ 166 sa_writel(dev, Mailbox0, command); 167 /* 168 * Write the parameters into Mailboxes 1 - 4 169 */ 170 sa_writel(dev, Mailbox1, p1); 171 sa_writel(dev, Mailbox2, p2); 172 sa_writel(dev, Mailbox3, p3); 173 sa_writel(dev, Mailbox4, p4); 174 175 /* 176 * Clear the synch command doorbell to start on a clean slate. 177 */ 178 sa_writew(dev, DoorbellClrReg_p, DOORBELL_0); 179 /* 180 * Signal that there is a new synch command 181 */ 182 sa_writew(dev, DoorbellReg_s, DOORBELL_0); 183 184 ok = 0; 185 start = jiffies; 186 187 while(time_before(jiffies, start+30*HZ)) 188 { 189 /* 190 * Delay 5uS so that the monitor gets access 191 */ 192 udelay(5); 193 /* 194 * Mon110 will set doorbell0 bit when it has 195 * completed the command. 196 */ 197 if(sa_readw(dev, DoorbellReg_p) & DOORBELL_0) { 198 ok = 1; 199 break; 200 } 201 msleep(1); 202 } 203 204 if (ok != 1) 205 return -ETIMEDOUT; 206 /* 207 * Clear the synch command doorbell. 208 */ 209 sa_writew(dev, DoorbellClrReg_p, DOORBELL_0); 210 /* 211 * Pull the synch status from Mailbox 0. 212 */ 213 if (ret) 214 *ret = sa_readl(dev, Mailbox0); 215 if (r1) 216 *r1 = sa_readl(dev, Mailbox1); 217 if (r2) 218 *r2 = sa_readl(dev, Mailbox2); 219 if (r3) 220 *r3 = sa_readl(dev, Mailbox3); 221 if (r4) 222 *r4 = sa_readl(dev, Mailbox4); 223 return 0; 224 } 225 226 /** 227 * aac_sa_interrupt_adapter - interrupt an adapter 228 * @dev: Which adapter to enable. 229 * 230 * Breakpoint an adapter. 231 */ 232 233 static void aac_sa_interrupt_adapter (struct aac_dev *dev) 234 { 235 sa_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, 236 NULL, NULL, NULL, NULL, NULL); 237 } 238 239 /** 240 * aac_sa_start_adapter - activate adapter 241 * @dev: Adapter 242 * 243 * Start up processing on an ARM based AAC adapter 244 */ 245 246 static void aac_sa_start_adapter(struct aac_dev *dev) 247 { 248 struct aac_init *init; 249 /* 250 * Fill in the remaining pieces of the init. 251 */ 252 init = dev->init; 253 init->HostElapsedSeconds = cpu_to_le32(get_seconds()); 254 /* We can only use a 32 bit address here */ 255 sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, 256 (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, 257 NULL, NULL, NULL, NULL, NULL); 258 } 259 260 static int aac_sa_restart_adapter(struct aac_dev *dev, int bled) 261 { 262 return -EINVAL; 263 } 264 265 /** 266 * aac_sa_check_health 267 * @dev: device to check if healthy 268 * 269 * Will attempt to determine if the specified adapter is alive and 270 * capable of handling requests, returning 0 if alive. 271 */ 272 static int aac_sa_check_health(struct aac_dev *dev) 273 { 274 long status = sa_readl(dev, Mailbox7); 275 276 /* 277 * Check to see if the board failed any self tests. 278 */ 279 if (status & SELF_TEST_FAILED) 280 return -1; 281 /* 282 * Check to see if the board panic'd while booting. 283 */ 284 if (status & KERNEL_PANIC) 285 return -2; 286 /* 287 * Wait for the adapter to be up and running. Wait up to 3 minutes 288 */ 289 if (!(status & KERNEL_UP_AND_RUNNING)) 290 return -3; 291 /* 292 * Everything is OK 293 */ 294 return 0; 295 } 296 297 /** 298 * aac_sa_ioremap 299 * @size: mapping resize request 300 * 301 */ 302 static int aac_sa_ioremap(struct aac_dev * dev, u32 size) 303 { 304 if (!size) { 305 iounmap(dev->regs.sa); 306 return 0; 307 } 308 dev->base = dev->regs.sa = ioremap(dev->base_start, size); 309 return (dev->base == NULL) ? -1 : 0; 310 } 311 312 /** 313 * aac_sa_init - initialize an ARM based AAC card 314 * @dev: device to configure 315 * 316 * Allocate and set up resources for the ARM based AAC variants. The 317 * device_interface in the commregion will be allocated and linked 318 * to the comm region. 319 */ 320 321 int aac_sa_init(struct aac_dev *dev) 322 { 323 unsigned long start; 324 unsigned long status; 325 int instance; 326 const char *name; 327 328 instance = dev->id; 329 name = dev->name; 330 331 if (aac_sa_ioremap(dev, dev->base_size)) { 332 printk(KERN_WARNING "%s: unable to map adapter.\n", name); 333 goto error_iounmap; 334 } 335 336 /* 337 * Check to see if the board failed any self tests. 338 */ 339 if (sa_readl(dev, Mailbox7) & SELF_TEST_FAILED) { 340 printk(KERN_WARNING "%s%d: adapter self-test failed.\n", name, instance); 341 goto error_iounmap; 342 } 343 /* 344 * Check to see if the board panic'd while booting. 345 */ 346 if (sa_readl(dev, Mailbox7) & KERNEL_PANIC) { 347 printk(KERN_WARNING "%s%d: adapter kernel panic'd.\n", name, instance); 348 goto error_iounmap; 349 } 350 start = jiffies; 351 /* 352 * Wait for the adapter to be up and running. Wait up to 3 minutes. 353 */ 354 while (!(sa_readl(dev, Mailbox7) & KERNEL_UP_AND_RUNNING)) { 355 if (time_after(jiffies, start+startup_timeout*HZ)) { 356 status = sa_readl(dev, Mailbox7); 357 printk(KERN_WARNING "%s%d: adapter kernel failed to start, init status = %lx.\n", 358 name, instance, status); 359 goto error_iounmap; 360 } 361 msleep(1); 362 } 363 364 /* 365 * Fill in the function dispatch table. 366 */ 367 368 dev->a_ops.adapter_interrupt = aac_sa_interrupt_adapter; 369 dev->a_ops.adapter_disable_int = aac_sa_disable_interrupt; 370 dev->a_ops.adapter_enable_int = aac_sa_enable_interrupt; 371 dev->a_ops.adapter_notify = aac_sa_notify_adapter; 372 dev->a_ops.adapter_sync_cmd = sa_sync_cmd; 373 dev->a_ops.adapter_check_health = aac_sa_check_health; 374 dev->a_ops.adapter_restart = aac_sa_restart_adapter; 375 dev->a_ops.adapter_start = aac_sa_start_adapter; 376 dev->a_ops.adapter_intr = aac_sa_intr; 377 dev->a_ops.adapter_deliver = aac_rx_deliver_producer; 378 dev->a_ops.adapter_ioremap = aac_sa_ioremap; 379 380 /* 381 * First clear out all interrupts. Then enable the one's that 382 * we can handle. 383 */ 384 aac_adapter_disable_int(dev); 385 aac_adapter_enable_int(dev); 386 387 if(aac_init_adapter(dev) == NULL) 388 goto error_irq; 389 dev->sync_mode = 0; /* sync. mode not supported */ 390 if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, 391 IRQF_SHARED, "aacraid", (void *)dev) < 0) { 392 printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", 393 name, instance); 394 goto error_iounmap; 395 } 396 dev->dbg_base = dev->base_start; 397 dev->dbg_base_mapped = dev->base; 398 dev->dbg_size = dev->base_size; 399 400 aac_adapter_enable_int(dev); 401 402 /* 403 * Tell the adapter that all is configure, and it can start 404 * accepting requests 405 */ 406 aac_sa_start_adapter(dev); 407 return 0; 408 409 error_irq: 410 aac_sa_disable_interrupt(dev); 411 free_irq(dev->pdev->irq, (void *)dev); 412 413 error_iounmap: 414 415 return -1; 416 } 417 418