1menu "SCSI device support" 2 3config SCSI_MOD 4 tristate 5 default y if SCSI=n || SCSI=y 6 default m if SCSI=m 7 8config RAID_ATTRS 9 tristate "RAID Transport Class" 10 default n 11 depends on BLOCK 12 depends on SCSI_MOD 13 ---help--- 14 Provides RAID 15 16config SCSI 17 tristate "SCSI device support" 18 depends on BLOCK 19 select SCSI_DMA if HAS_DMA 20 ---help--- 21 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or 22 any other SCSI device under Linux, say Y and make sure that you know 23 the name of your SCSI host adapter (the card inside your computer 24 that "speaks" the SCSI protocol, also called SCSI controller), 25 because you will be asked for it. 26 27 You also need to say Y here if you have a device which speaks 28 the SCSI protocol. Examples of this include the parallel port 29 version of the IOMEGA ZIP drive, USB storage devices, Fibre 30 Channel, and FireWire storage. 31 32 To compile this driver as a module, choose M here and read 33 <file:Documentation/scsi/scsi.txt>. 34 The module will be called scsi_mod. 35 36 However, do not compile this as a module if your root file system 37 (the one containing the directory /) is located on a SCSI device. 38 39config SCSI_DMA 40 bool 41 default n 42 43config SCSI_TGT 44 tristate "SCSI target support" 45 depends on SCSI && EXPERIMENTAL 46 ---help--- 47 If you want to use SCSI target mode drivers enable this option. 48 If you choose M, the module will be called scsi_tgt. 49 50config SCSI_NETLINK 51 bool 52 default n 53 select NET 54 55config SCSI_PROC_FS 56 bool "legacy /proc/scsi/ support" 57 depends on SCSI && PROC_FS 58 default y 59 ---help--- 60 This option enables support for the various files in 61 /proc/scsi. In Linux 2.6 this has been superseded by 62 files in sysfs but many legacy applications rely on this. 63 64 If unsure say Y. 65 66comment "SCSI support type (disk, tape, CD-ROM)" 67 depends on SCSI 68 69config BLK_DEV_SD 70 tristate "SCSI disk support" 71 depends on SCSI 72 select CRC_T10DIF if BLK_DEV_INTEGRITY 73 ---help--- 74 If you want to use SCSI hard disks, Fibre Channel disks, 75 Serial ATA (SATA) or Parallel ATA (PATA) hard disks, 76 USB storage or the SCSI or parallel port version of 77 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, 78 the Disk-HOWTO and the Multi-Disk-HOWTO, available from 79 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI 80 CD-ROMs. 81 82 To compile this driver as a module, choose M here and read 83 <file:Documentation/scsi/scsi.txt>. 84 The module will be called sd_mod. 85 86 Do not compile this driver as a module if your root file system 87 (the one containing the directory /) is located on a SCSI disk. 88 In this case, do not compile the driver for your SCSI host adapter 89 (below) as a module either. 90 91config CHR_DEV_ST 92 tristate "SCSI tape support" 93 depends on SCSI 94 ---help--- 95 If you want to use a SCSI tape drive under Linux, say Y and read the 96 SCSI-HOWTO, available from 97 <http://www.tldp.org/docs.html#howto>, and 98 <file:Documentation/scsi/st.txt> in the kernel source. This is NOT 99 for SCSI CD-ROMs. 100 101 To compile this driver as a module, choose M here and read 102 <file:Documentation/scsi/scsi.txt>. The module will be called st. 103 104config CHR_DEV_OSST 105 tristate "SCSI OnStream SC-x0 tape support" 106 depends on SCSI 107 ---help--- 108 The OnStream SC-x0 SCSI tape drives cannot be driven by the 109 standard st driver, but instead need this special osst driver and 110 use the /dev/osstX char device nodes (major 206). Via usb-storage, 111 you may be able to drive the USB-x0 and DI-x0 drives as well. 112 Note that there is also a second generation of OnStream 113 tape drives (ADR-x0) that supports the standard SCSI-2 commands for 114 tapes (QIC-157) and can be driven by the standard driver st. 115 For more information, you may have a look at the SCSI-HOWTO 116 <http://www.tldp.org/docs.html#howto> and 117 <file:Documentation/scsi/osst.txt> in the kernel source. 118 More info on the OnStream driver may be found on 119 <http://sourceforge.net/projects/osst/> 120 Please also have a look at the standard st docu, as most of it 121 applies to osst as well. 122 123 To compile this driver as a module, choose M here and read 124 <file:Documentation/scsi/scsi.txt>. The module will be called osst. 125 126config BLK_DEV_SR 127 tristate "SCSI CDROM support" 128 depends on SCSI 129 ---help--- 130 If you want to use a CD or DVD drive attached to your computer 131 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO 132 and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>. 133 134 Make sure to say Y or M to "ISO 9660 CD-ROM file system support". 135 136 To compile this driver as a module, choose M here and read 137 <file:Documentation/scsi/scsi.txt>. 138 The module will be called sr_mod. 139 140config BLK_DEV_SR_VENDOR 141 bool "Enable vendor-specific extensions (for SCSI CDROM)" 142 depends on BLK_DEV_SR 143 help 144 This enables the usage of vendor specific SCSI commands. This is 145 required to support multisession CDs with old NEC/TOSHIBA cdrom 146 drives (and HP Writers). If you have such a drive and get the first 147 session only, try saying Y here; everybody else says N. 148 149config CHR_DEV_SG 150 tristate "SCSI generic support" 151 depends on SCSI 152 ---help--- 153 If you want to use SCSI scanners, synthesizers or CD-writers or just 154 about anything having "SCSI" in its name other than hard disks, 155 CD-ROMs or tapes, say Y here. These won't be supported by the kernel 156 directly, so you need some additional software which knows how to 157 talk to these devices using the SCSI protocol: 158 159 For scanners, look at SANE (<http://www.sane-project.org/>). For CD 160 writer software look at Cdrtools 161 (<http://cdrecord.berlios.de/private/cdrecord.html>) 162 and for burning a "disk at once": CDRDAO 163 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high 164 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). 165 For other devices, it's possible that you'll have to write the 166 driver software yourself. Please read the file 167 <file:Documentation/scsi/scsi-generic.txt> for more information. 168 169 To compile this driver as a module, choose M here and read 170 <file:Documentation/scsi/scsi.txt>. The module will be called sg. 171 172 If unsure, say N. 173 174config CHR_DEV_SCH 175 tristate "SCSI media changer support" 176 depends on SCSI 177 ---help--- 178 This is a driver for SCSI media changers. Most common devices are 179 tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you 180 don't need this for those tiny 6-slot cdrom changers. Media 181 changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. 182 If you have such hardware and want to use it with linux, say Y 183 here. Check <file:Documentation/scsi/scsi-changer.txt> for details. 184 185 If you want to compile this as a module ( = code which can be 186 inserted in and removed from the running kernel whenever you want), 187 say M here and read <file:Documentation/kbuild/modules.txt> and 188 <file:Documentation/scsi/scsi.txt>. The module will be called ch.o. 189 If unsure, say N. 190 191config SCSI_ENCLOSURE 192 tristate "SCSI Enclosure Support" 193 depends on SCSI && ENCLOSURE_SERVICES 194 help 195 Enclosures are devices sitting on or in SCSI backplanes that 196 manage devices. If you have a disk cage, the chances are that 197 it has an enclosure device. Selecting this option will just allow 198 certain enclosure conditions to be reported and is not required. 199 200config SCSI_MULTI_LUN 201 bool "Probe all LUNs on each SCSI device" 202 depends on SCSI 203 help 204 Some devices support more than one LUN (Logical Unit Number) in order 205 to allow access to several media, e.g. CD jukebox, USB card reader, 206 mobile phone in mass storage mode. This option forces the kernel to 207 probe for all LUNs by default. This setting can be overriden by 208 max_luns boot/module parameter. Note that this option does not affect 209 devices conforming to SCSI-3 or higher as they can explicitely report 210 their number of LUNs. It is safe to say Y here unless you have one of 211 those rare devices which reacts in an unexpected way when probed for 212 multiple LUNs. 213 214config SCSI_CONSTANTS 215 bool "Verbose SCSI error reporting (kernel size +=12K)" 216 depends on SCSI 217 help 218 The error messages regarding your SCSI hardware will be easier to 219 understand if you say Y here; it will enlarge your kernel by about 220 12 KB. If in doubt, say Y. 221 222config SCSI_LOGGING 223 bool "SCSI logging facility" 224 depends on SCSI 225 ---help--- 226 This turns on a logging facility that can be used to debug a number 227 of SCSI related problems. 228 229 If you say Y here, no logging output will appear by default, but you 230 can enable logging by saying Y to "/proc file system support" and 231 "Sysctl support" below and executing the command 232 233 echo <bitmask> > /proc/sys/dev/scsi/logging_level 234 235 where <bitmask> is a four byte value representing the logging type 236 and logging level for each type of logging selected. 237 238 There are a number of logging types and you can find them in the 239 source at <file:drivers/scsi/scsi_logging.h>. The logging levels 240 are also described in that file and they determine the verbosity of 241 the logging for each logging type. 242 243 If you say N here, it may be harder to track down some types of SCSI 244 problems. If you say Y here your kernel will be somewhat larger, but 245 there should be no noticeable performance impact as long as you have 246 logging turned off. 247 248config SCSI_SCAN_ASYNC 249 bool "Asynchronous SCSI scanning" 250 depends on SCSI 251 help 252 The SCSI subsystem can probe for devices while the rest of the 253 system continues booting, and even probe devices on different 254 busses in parallel, leading to a significant speed-up. 255 256 If you have built SCSI as modules, enabling this option can 257 be a problem as the devices may not have been found by the 258 time your system expects them to have been. You can load the 259 scsi_wait_scan module to ensure that all scans have completed. 260 If you build your SCSI drivers into the kernel, then everything 261 will work fine if you say Y here. 262 263 You can override this choice by specifying "scsi_mod.scan=sync" 264 or async on the kernel's command line. 265 266config SCSI_WAIT_SCAN 267 tristate # No prompt here, this is an invisible symbol. 268 default m 269 depends on SCSI 270 depends on MODULES 271# scsi_wait_scan is a loadable module which waits until all the async scans are 272# complete. The idea is to use it in initrd/ initramfs scripts. You modprobe 273# it after all the modprobes of the root SCSI drivers and it will wait until 274# they have all finished scanning their buses before allowing the boot to 275# proceed. (This method is not applicable if targets boot independently in 276# parallel with the initiator, or with transports with non-deterministic target 277# discovery schemes, or if a transport driver does not support scsi_wait_scan.) 278# 279# This symbol is not exposed as a prompt because little is to be gained by 280# disabling it, whereas people who accidentally switch it off may wonder why 281# their mkinitrd gets into trouble. 282 283menu "SCSI Transports" 284 depends on SCSI 285 286config SCSI_SPI_ATTRS 287 tristate "Parallel SCSI (SPI) Transport Attributes" 288 depends on SCSI 289 help 290 If you wish to export transport-specific information about 291 each attached SCSI device to sysfs, say Y. Otherwise, say N. 292 293config SCSI_FC_ATTRS 294 tristate "FiberChannel Transport Attributes" 295 depends on SCSI 296 select SCSI_NETLINK 297 help 298 If you wish to export transport-specific information about 299 each attached FiberChannel device to sysfs, say Y. 300 Otherwise, say N. 301 302config SCSI_FC_TGT_ATTRS 303 bool "SCSI target support for FiberChannel Transport Attributes" 304 depends on SCSI_FC_ATTRS 305 depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS 306 help 307 If you want to use SCSI target mode drivers enable this option. 308 309config SCSI_ISCSI_ATTRS 310 tristate "iSCSI Transport Attributes" 311 depends on SCSI && NET 312 help 313 If you wish to export transport-specific information about 314 each attached iSCSI device to sysfs, say Y. 315 Otherwise, say N. 316 317config SCSI_SAS_ATTRS 318 tristate "SAS Transport Attributes" 319 depends on SCSI 320 select BLK_DEV_BSG 321 help 322 If you wish to export transport-specific information about 323 each attached SAS device to sysfs, say Y. 324 325source "drivers/scsi/libsas/Kconfig" 326 327config SCSI_SRP_ATTRS 328 tristate "SRP Transport Attributes" 329 depends on SCSI 330 help 331 If you wish to export transport-specific information about 332 each attached SRP device to sysfs, say Y. 333 334config SCSI_SRP_TGT_ATTRS 335 bool "SCSI target support for SRP Transport Attributes" 336 depends on SCSI_SRP_ATTRS 337 depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS 338 help 339 If you want to use SCSI target mode drivers enable this option. 340 341endmenu 342 343menuconfig SCSI_LOWLEVEL 344 bool "SCSI low-level drivers" 345 depends on SCSI!=n 346 default y 347 348if SCSI_LOWLEVEL && SCSI 349 350config ISCSI_TCP 351 tristate "iSCSI Initiator over TCP/IP" 352 depends on SCSI && INET 353 select CRYPTO 354 select CRYPTO_MD5 355 select CRYPTO_CRC32C 356 select SCSI_ISCSI_ATTRS 357 help 358 The iSCSI Driver provides a host with the ability to access storage 359 through an IP network. The driver uses the iSCSI protocol to transport 360 SCSI requests and responses over a TCP/IP network between the host 361 (the "initiator") and "targets". Architecturally, the iSCSI driver 362 combines with the host's TCP/IP stack, network drivers, and Network 363 Interface Card (NIC) to provide the same functions as a SCSI or a 364 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). 365 366 To compile this driver as a module, choose M here: the 367 module will be called iscsi_tcp. 368 369 The userspace component needed to initialize the driver, documentation, 370 and sample configuration files can be found here: 371 372 http://open-iscsi.org 373 374config ISCSI_BOOT_SYSFS 375 tristate "iSCSI Boot Sysfs Interface" 376 default n 377 help 378 This option enables support for exposing iSCSI boot information 379 via sysfs to userspace. If you wish to export this information, 380 say Y. Otherwise, say N. 381 382source "drivers/scsi/cxgbi/Kconfig" 383source "drivers/scsi/bnx2i/Kconfig" 384source "drivers/scsi/bnx2fc/Kconfig" 385source "drivers/scsi/be2iscsi/Kconfig" 386 387config SGIWD93_SCSI 388 tristate "SGI WD93C93 SCSI Driver" 389 depends on SGI_HAS_WD93 && SCSI 390 help 391 If you have a Western Digital WD93 SCSI controller on 392 an SGI MIPS system, say Y. Otherwise, say N. 393 394config BLK_DEV_3W_XXXX_RAID 395 tristate "3ware 5/6/7/8xxx ATA-RAID support" 396 depends on PCI && SCSI 397 help 398 3ware is the only hardware ATA-Raid product in Linux to date. 399 This card is 2,4, or 8 channel master mode support only. 400 SCSI support required!!! 401 402 <http://www.3ware.com/> 403 404 Please read the comments at the top of 405 <file:drivers/scsi/3w-xxxx.c>. 406 407config SCSI_HPSA 408 tristate "HP Smart Array SCSI driver" 409 depends on PCI && SCSI 410 help 411 This driver supports HP Smart Array Controllers (circa 2009). 412 It is a SCSI alternative to the cciss driver, which is a block 413 driver. Anyone wishing to use HP Smart Array controllers who 414 would prefer the devices be presented to linux as SCSI devices, 415 rather than as generic block devices should say Y here. 416 417config SCSI_3W_9XXX 418 tristate "3ware 9xxx SATA-RAID support" 419 depends on PCI && SCSI 420 help 421 This driver supports the 9000 series 3ware SATA-RAID cards. 422 423 <http://www.amcc.com> 424 425 Please read the comments at the top of 426 <file:drivers/scsi/3w-9xxx.c>. 427 428config SCSI_3W_SAS 429 tristate "3ware 97xx SAS/SATA-RAID support" 430 depends on PCI && SCSI 431 help 432 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards. 433 434 <http://www.lsi.com> 435 436 Please read the comments at the top of 437 <file:drivers/scsi/3w-sas.c>. 438 439config SCSI_7000FASST 440 tristate "7000FASST SCSI support" 441 depends on ISA && SCSI && ISA_DMA_API 442 select CHECK_SIGNATURE 443 help 444 This driver supports the Western Digital 7000 SCSI host adapter 445 family. Some information is in the source: 446 <file:drivers/scsi/wd7000.c>. 447 448 To compile this driver as a module, choose M here: the 449 module will be called wd7000. 450 451config SCSI_ACARD 452 tristate "ACARD SCSI support" 453 depends on PCI && SCSI 454 help 455 This driver supports the ACARD SCSI host adapter. 456 Support Chip <ATP870 ATP876 ATP880 ATP885> 457 To compile this driver as a module, choose M here: the 458 module will be called atp870u. 459 460config SCSI_AHA152X 461 tristate "Adaptec AHA152X/2825 support" 462 depends on ISA && SCSI && !64BIT 463 select SCSI_SPI_ATTRS 464 select CHECK_SIGNATURE 465 ---help--- 466 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 467 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. 468 must be manually specified in this case. 469 470 It is explained in section 3.3 of the SCSI-HOWTO, available from 471 <http://www.tldp.org/docs.html#howto>. You might also want to 472 read the file <file:Documentation/scsi/aha152x.txt>. 473 474 To compile this driver as a module, choose M here: the 475 module will be called aha152x. 476 477config SCSI_AHA1542 478 tristate "Adaptec AHA1542 support" 479 depends on ISA && SCSI && ISA_DMA_API 480 ---help--- 481 This is support for a SCSI host adapter. It is explained in section 482 3.4 of the SCSI-HOWTO, available from 483 <http://www.tldp.org/docs.html#howto>. Note that Trantor was 484 purchased by Adaptec, and some former Trantor products are being 485 sold under the Adaptec name. If it doesn't work out of the box, you 486 may have to change some settings in <file:drivers/scsi/aha1542.h>. 487 488 To compile this driver as a module, choose M here: the 489 module will be called aha1542. 490 491config SCSI_AHA1740 492 tristate "Adaptec AHA1740 support" 493 depends on EISA && SCSI 494 ---help--- 495 This is support for a SCSI host adapter. It is explained in section 496 3.5 of the SCSI-HOWTO, available from 497 <http://www.tldp.org/docs.html#howto>. If it doesn't work out 498 of the box, you may have to change some settings in 499 <file:drivers/scsi/aha1740.h>. 500 501 To compile this driver as a module, choose M here: the 502 module will be called aha1740. 503 504config SCSI_AACRAID 505 tristate "Adaptec AACRAID support" 506 depends on SCSI && PCI 507 help 508 This driver supports a variety of Dell, HP, Adaptec, IBM and 509 ICP storage products. For a list of supported products, refer 510 to <file:Documentation/scsi/aacraid.txt>. 511 512 To compile this driver as a module, choose M here: the module 513 will be called aacraid. 514 515 516source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" 517 518config SCSI_AIC7XXX_OLD 519 tristate "Adaptec AIC7xxx support (old driver)" 520 depends on (ISA || EISA || PCI ) && SCSI 521 help 522 WARNING This driver is an older aic7xxx driver and is no longer 523 under active development. Adaptec, Inc. is writing a new driver to 524 take the place of this one, and it is recommended that whenever 525 possible, people should use the new Adaptec written driver instead 526 of this one. This driver will eventually be phased out entirely. 527 528 This is support for the various aic7xxx based Adaptec SCSI 529 controllers. These include the 274x EISA cards; 284x VLB cards; 530 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and 531 motherboard based SCSI controllers from Adaptec. It does not support 532 the AAA-13x RAID controllers from Adaptec, nor will it likely ever 533 support them. It does not support the 2920 cards from Adaptec that 534 use the Future Domain SCSI controller chip. For those cards, you 535 need the "Future Domain 16xx SCSI support" driver. 536 537 In general, if the controller is based on an Adaptec SCSI controller 538 chip from the aic777x series or the aic78xx series, this driver 539 should work. The only exception is the 7810 which is specifically 540 not supported (that's the RAID controller chip on the AAA-13x 541 cards). 542 543 Note that the AHA2920 SCSI host adapter is *not* supported by this 544 driver; choose "Future Domain 16xx SCSI support" instead if you have 545 one of those. 546 547 Information on the configuration options for this controller can be 548 found by checking the help file for each of the available 549 configuration options. You should read 550 <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before 551 contacting the maintainer with any questions. The SCSI-HOWTO, 552 available from <http://www.tldp.org/docs.html#howto>, can also 553 be of great help. 554 555 To compile this driver as a module, choose M here: the 556 module will be called aic7xxx_old. 557 558source "drivers/scsi/aic7xxx/Kconfig.aic79xx" 559source "drivers/scsi/aic94xx/Kconfig" 560source "drivers/scsi/mvsas/Kconfig" 561 562config SCSI_DPT_I2O 563 tristate "Adaptec I2O RAID support " 564 depends on SCSI && PCI && VIRT_TO_BUS 565 help 566 This driver supports all of Adaptec's I2O based RAID controllers as 567 well as the DPT SmartRaid V cards. This is an Adaptec maintained 568 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>. 569 570 To compile this driver as a module, choose M here: the 571 module will be called dpt_i2o. 572 573config SCSI_ADVANSYS 574 tristate "AdvanSys SCSI support" 575 depends on SCSI && VIRT_TO_BUS 576 depends on ISA || EISA || PCI 577 help 578 This is a driver for all SCSI host adapters manufactured by 579 AdvanSys. It is documented in the kernel source in 580 <file:drivers/scsi/advansys.c>. 581 582 To compile this driver as a module, choose M here: the 583 module will be called advansys. 584 585config SCSI_IN2000 586 tristate "Always IN2000 SCSI support" 587 depends on ISA && SCSI 588 help 589 This is support for an ISA bus SCSI host adapter. You'll find more 590 information in <file:Documentation/scsi/in2000.txt>. If it doesn't work 591 out of the box, you may have to change the jumpers for IRQ or 592 address selection. 593 594 To compile this driver as a module, choose M here: the 595 module will be called in2000. 596 597config SCSI_ARCMSR 598 tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter" 599 depends on PCI && SCSI 600 help 601 This driver supports all of ARECA's SATA/SAS RAID controller cards. 602 This is an ARECA-maintained driver by Erich Chen. 603 If you have any problems, please mail to: <erich@areca.com.tw>. 604 Areca supports Linux RAID config tools. 605 Please link <http://www.areca.com.tw> 606 607 To compile this driver as a module, choose M here: the 608 module will be called arcmsr (modprobe arcmsr). 609 610config SCSI_ARCMSR_AER 611 bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)" 612 depends on SCSI_ARCMSR && PCIEAER 613 default n 614 help 615 The advanced error reporting(AER) capability is "NOT" provided by 616 ARC1200/1201/1202 SATA RAID controllers cards. 617 If your card is one of ARC1200/1201/1202, please use the default setting, n. 618 If your card is other models, you could pick it 619 on condition that the kernel version is greater than 2.6.19. 620 This function is maintained driver by Nick Cheng. If you have any 621 problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>. 622 To enable this function, choose Y here. 623 624source "drivers/scsi/megaraid/Kconfig.megaraid" 625source "drivers/scsi/mpt2sas/Kconfig" 626 627config SCSI_HPTIOP 628 tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" 629 depends on SCSI && PCI 630 help 631 This option enables support for HighPoint RocketRAID 3xxx/4xxx 632 controllers. 633 634 To compile this driver as a module, choose M here; the module 635 will be called hptiop. If unsure, say N. 636 637config SCSI_BUSLOGIC 638 tristate "BusLogic SCSI support" 639 depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS 640 ---help--- 641 This is support for BusLogic MultiMaster and FlashPoint SCSI Host 642 Adapters. Consult the SCSI-HOWTO, available from 643 <http://www.tldp.org/docs.html#howto>, and the files 644 <file:Documentation/scsi/BusLogic.txt> and 645 <file:Documentation/scsi/FlashPoint.txt> for more information. 646 Note that support for FlashPoint is only available for 32-bit 647 x86 configurations. 648 649 To compile this driver as a module, choose M here: the 650 module will be called BusLogic. 651 652config SCSI_FLASHPOINT 653 bool "FlashPoint support" 654 depends on SCSI_BUSLOGIC && PCI && X86_32 655 help 656 This option allows you to add FlashPoint support to the 657 BusLogic SCSI driver. The FlashPoint SCCB Manager code is 658 substantial, so users of MultiMaster Host Adapters may not 659 wish to include it. 660 661config VMWARE_PVSCSI 662 tristate "VMware PVSCSI driver support" 663 depends on PCI && SCSI && X86 664 help 665 This driver supports VMware's para virtualized SCSI HBA. 666 To compile this driver as a module, choose M here: the 667 module will be called vmw_pvscsi. 668 669config LIBFC 670 tristate "LibFC module" 671 select SCSI_FC_ATTRS 672 select CRC32 673 ---help--- 674 Fibre Channel library module 675 676config LIBFCOE 677 tristate "LibFCoE module" 678 select LIBFC 679 ---help--- 680 Library for Fibre Channel over Ethernet module 681 682config FCOE 683 tristate "FCoE module" 684 depends on PCI 685 select LIBFCOE 686 ---help--- 687 Fibre Channel over Ethernet module 688 689config FCOE_FNIC 690 tristate "Cisco FNIC Driver" 691 depends on PCI && X86 692 select LIBFCOE 693 help 694 This is support for the Cisco PCI-Express FCoE HBA. 695 696 To compile this driver as a module, choose M here and read 697 <file:Documentation/scsi/scsi.txt>. 698 The module will be called fnic. 699 700config SCSI_DMX3191D 701 tristate "DMX3191D SCSI support" 702 depends on PCI && SCSI 703 select SCSI_SPI_ATTRS 704 help 705 This is support for Domex DMX3191D SCSI Host Adapters. 706 707 To compile this driver as a module, choose M here: the 708 module will be called dmx3191d. 709 710config SCSI_DTC3280 711 tristate "DTC3180/3280 SCSI support" 712 depends on ISA && SCSI 713 select SCSI_SPI_ATTRS 714 select CHECK_SIGNATURE 715 help 716 This is support for DTC 3180/3280 SCSI Host Adapters. Please read 717 the SCSI-HOWTO, available from 718 <http://www.tldp.org/docs.html#howto>, and the file 719 <file:Documentation/scsi/dtc3x80.txt>. 720 721 To compile this driver as a module, choose M here: the 722 module will be called dtc. 723 724config SCSI_EATA 725 tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support" 726 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API 727 ---help--- 728 This driver supports all EATA/DMA-compliant SCSI host adapters. DPT 729 ISA and all EISA I/O addresses are probed looking for the "EATA" 730 signature. The addresses of all the PCI SCSI controllers reported 731 by the PCI subsystem are probed as well. 732 733 You want to read the start of <file:drivers/scsi/eata.c> and the 734 SCSI-HOWTO, available from 735 <http://www.tldp.org/docs.html#howto>. 736 737 To compile this driver as a module, choose M here: the 738 module will be called eata. 739 740config SCSI_EATA_TAGGED_QUEUE 741 bool "enable tagged command queueing" 742 depends on SCSI_EATA 743 help 744 This is a feature of SCSI-2 which improves performance: the host 745 adapter can send several SCSI commands to a device's queue even if 746 previous commands haven't finished yet. 747 This is equivalent to the "eata=tc:y" boot option. 748 749config SCSI_EATA_LINKED_COMMANDS 750 bool "enable elevator sorting" 751 depends on SCSI_EATA 752 help 753 This option enables elevator sorting for all probed SCSI disks and 754 CD-ROMs. It definitely reduces the average seek distance when doing 755 random seeks, but this does not necessarily result in a noticeable 756 performance improvement: your mileage may vary... 757 This is equivalent to the "eata=lc:y" boot option. 758 759config SCSI_EATA_MAX_TAGS 760 int "maximum number of queued commands" 761 depends on SCSI_EATA 762 default "16" 763 help 764 This specifies how many SCSI commands can be maximally queued for 765 each probed SCSI device. You should reduce the default value of 16 766 only if you have disks with buggy or limited tagged command support. 767 Minimum is 2 and maximum is 62. This value is also the window size 768 used by the elevator sorting option above. The effective value used 769 by the driver for each probed SCSI device is reported at boot time. 770 This is equivalent to the "eata=mq:8" boot option. 771 772config SCSI_EATA_PIO 773 tristate "EATA-PIO (old DPT PM2001, PM2012A) support" 774 depends on (ISA || EISA || PCI) && SCSI && BROKEN 775 ---help--- 776 This driver supports all EATA-PIO protocol compliant SCSI Host 777 Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant 778 host adapters could also use this driver but are discouraged from 779 doing so, since this driver only supports hard disks and lacks 780 numerous features. You might want to have a look at the SCSI-HOWTO, 781 available from <http://www.tldp.org/docs.html#howto>. 782 783 To compile this driver as a module, choose M here: the 784 module will be called eata_pio. 785 786config SCSI_FUTURE_DOMAIN 787 tristate "Future Domain 16xx SCSI/AHA-2920A support" 788 depends on (ISA || PCI) && SCSI 789 select CHECK_SIGNATURE 790 ---help--- 791 This is support for Future Domain's 16-bit SCSI host adapters 792 (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and 793 other adapters based on the Future Domain chipsets (Quantum 794 ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board). 795 It is explained in section 3.7 of the SCSI-HOWTO, available from 796 <http://www.tldp.org/docs.html#howto>. 797 798 NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip 799 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI 800 controller support"). This Future Domain driver works with the older 801 Adaptec AHA-2920A boards with a Future Domain chip on them. 802 803 To compile this driver as a module, choose M here: the 804 module will be called fdomain. 805 806config SCSI_FD_MCS 807 tristate "Future Domain MCS-600/700 SCSI support" 808 depends on MCA_LEGACY && SCSI 809 ---help--- 810 This is support for Future Domain MCS 600/700 MCA SCSI adapters. 811 Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which 812 is identical to the MCS 700 and hence also supported by this driver. 813 This driver also supports the Reply SB16/SCSI card (the SCSI part). 814 It supports multiple adapters in the same system. 815 816 To compile this driver as a module, choose M here: the 817 module will be called fd_mcs. 818 819config SCSI_GDTH 820 tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" 821 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API 822 ---help--- 823 Formerly called GDT SCSI Disk Array Controller Support. 824 825 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) 826 manufactured by Intel Corporation/ICP vortex GmbH. It is documented 827 in the kernel source in <file:drivers/scsi/gdth.c> and 828 <file:drivers/scsi/gdth.h>. 829 830 To compile this driver as a module, choose M here: the 831 module will be called gdth. 832 833config SCSI_ISCI 834 tristate "Intel(R) C600 Series Chipset SAS Controller" 835 depends on PCI && SCSI 836 # little endian host assumptions 837 depends on X86 838 # (temporary): dma api misuse 839 depends on !DMAR 840 # (temporary): known alpha quality driver 841 depends on EXPERIMENTAL 842 select SCSI_SAS_LIBSAS 843 ---help--- 844 This driver supports the 6Gb/s SAS capabilities of the storage 845 control unit found in the Intel(R) C600 series chipset. 846 847 The experimental tag will be removed after the driver exits alpha 848 849choice 850 prompt "Default Silicon Revision" 851 depends on SCSI_ISCI 852 default PBG_HBA_A2 853 # temporary A-step silicon is pre-production 854 855config PBG_HBA_BETA 856 bool "B0" 857 858config PBG_HBA_A2 859 bool "A2" 860 861config PBG_HBA_A0 862 bool "A0" 863 864endchoice 865 866 867config SCSI_GENERIC_NCR5380 868 tristate "Generic NCR5380/53c400 SCSI PIO support" 869 depends on ISA && SCSI 870 select SCSI_SPI_ATTRS 871 ---help--- 872 This is a driver for the old NCR 53c80 series of SCSI controllers 873 on boards using PIO. Most boards such as the Trantor T130 fit this 874 category, along with a large number of ISA 8bit controllers shipped 875 for free with SCSI scanners. If you have a PAS16, T128 or DMX3191 876 you should select the specific driver for that card rather than 877 generic 5380 support. 878 879 It is explained in section 3.8 of the SCSI-HOWTO, available from 880 <http://www.tldp.org/docs.html#howto>. If it doesn't work out 881 of the box, you may have to change some settings in 882 <file:drivers/scsi/g_NCR5380.h>. 883 884 To compile this driver as a module, choose M here: the 885 module will be called g_NCR5380. 886 887config SCSI_GENERIC_NCR5380_MMIO 888 tristate "Generic NCR5380/53c400 SCSI MMIO support" 889 depends on ISA && SCSI 890 select SCSI_SPI_ATTRS 891 ---help--- 892 This is a driver for the old NCR 53c80 series of SCSI controllers 893 on boards using memory mapped I/O. 894 It is explained in section 3.8 of the SCSI-HOWTO, available from 895 <http://www.tldp.org/docs.html#howto>. If it doesn't work out 896 of the box, you may have to change some settings in 897 <file:drivers/scsi/g_NCR5380.h>. 898 899 To compile this driver as a module, choose M here: the 900 module will be called g_NCR5380_mmio. 901 902config SCSI_GENERIC_NCR53C400 903 bool "Enable NCR53c400 extensions" 904 depends on SCSI_GENERIC_NCR5380 905 help 906 This enables certain optimizations for the NCR53c400 SCSI cards. 907 You might as well try it out. Note that this driver will only probe 908 for the Trantor T130B in its default configuration; you might have 909 to pass a command line option to the kernel at boot time if it does 910 not detect your card. See the file 911 <file:Documentation/scsi/g_NCR5380.txt> for details. 912 913config SCSI_IBMMCA 914 tristate "IBMMCA SCSI support" 915 depends on MCA && SCSI 916 ---help--- 917 This is support for the IBM SCSI adapter found in many of the PS/2 918 series computers. These machines have an MCA bus, so you need to 919 answer Y to "MCA support" as well and read 920 <file:Documentation/mca.txt>. 921 922 If the adapter isn't found during boot (a common problem for models 923 56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel 924 option, where <pun> is the id of the SCSI subsystem (usually 7, but 925 if that doesn't work check your reference diskette). Owners of 926 model 95 with a LED-matrix-display can in addition activate some 927 activity info like under OS/2, but more informative, by setting 928 'ibmmcascsi=display' as an additional kernel parameter. Try "man 929 bootparam" or see the documentation of your boot loader about how to 930 pass options to the kernel. 931 932 To compile this driver as a module, choose M here: the 933 module will be called ibmmca. 934 935config IBMMCA_SCSI_ORDER_STANDARD 936 bool "Standard SCSI-order" 937 depends on SCSI_IBMMCA 938 ---help--- 939 In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks 940 are assigned to the drive letters, starting with the lowest SCSI-id 941 (physical number -- pun) to be drive C:, as seen from DOS and 942 similar operating systems. When looking into papers describing the 943 ANSI-SCSI-standard, this assignment of drives appears to be wrong. 944 The SCSI-standard follows a hardware-hierarchy which says that id 7 945 has the highest priority and id 0 the lowest. Therefore, the host 946 adapters are still today everywhere placed as SCSI-id 7 by default. 947 In the SCSI-standard, the drive letters express the priority of the 948 disk. C: should be the hard disk, or a partition on it, with the 949 highest priority. This must therefore be the disk with the highest 950 SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the 951 original definition of the SCSI-standard as also industrial- and 952 process-control-machines, like VME-CPUs running under realtime-OSes 953 (e.g. LynxOS, OS9) do. 954 955 If you like to run Linux on your MCA-machine with the same 956 assignment of hard disks as seen from e.g. DOS or OS/2 on your 957 machine, which is in addition conformant to the SCSI-standard, you 958 must say Y here. This is also necessary for MCA-Linux users who want 959 to keep downward compatibility to older releases of the 960 IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than 961 June 1997). 962 963 If you like to have the lowest SCSI-id assigned as drive C:, as 964 modern SCSI-BIOSes do, which does not conform to the standard, but 965 is widespread and common in the PC-world of today, you must say N 966 here. If unsure, say Y. 967 968config IBMMCA_SCSI_DEV_RESET 969 bool "Reset SCSI-devices at boottime" 970 depends on SCSI_IBMMCA 971 ---help--- 972 By default, SCSI-devices are reset when the machine is powered on. 973 However, some devices exist, like special-control-devices, 974 SCSI-CNC-machines, SCSI-printer or scanners of older type, that do 975 not reset when switched on. If you say Y here, each device connected 976 to your SCSI-bus will be issued a reset-command after it has been 977 probed, while the kernel is booting. This may cause problems with 978 more modern devices, like hard disks, which do not appreciate these 979 reset commands, and can cause your system to hang. So say Y only if 980 you know that one of your older devices needs it; N is the safe 981 answer. 982 983config SCSI_IPS 984 tristate "IBM ServeRAID support" 985 depends on PCI && SCSI 986 ---help--- 987 This is support for the IBM ServeRAID hardware RAID controllers. 988 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> 989 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> 990 for more information. If this driver does not work correctly 991 without modification please contact the author by email at 992 <ipslinux@adaptec.com>. 993 994 To compile this driver as a module, choose M here: the 995 module will be called ips. 996 997config SCSI_IBMVSCSI 998 tristate "IBM Virtual SCSI support" 999 depends on PPC_PSERIES || PPC_ISERIES 1000 select SCSI_SRP_ATTRS 1001 select VIOPATH if PPC_ISERIES 1002 help 1003 This is the IBM POWER Virtual SCSI Client 1004 1005 To compile this driver as a module, choose M here: the 1006 module will be called ibmvscsic. 1007 1008config SCSI_IBMVSCSIS 1009 tristate "IBM Virtual SCSI Server support" 1010 depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS 1011 help 1012 This is the SRP target driver for IBM pSeries virtual environments. 1013 1014 The userspace component needed to initialize the driver and 1015 documentation can be found: 1016 1017 http://stgt.berlios.de/ 1018 1019 To compile this driver as a module, choose M here: the 1020 module will be called ibmvstgt. 1021 1022config SCSI_IBMVFC 1023 tristate "IBM Virtual FC support" 1024 depends on PPC_PSERIES && SCSI 1025 select SCSI_FC_ATTRS 1026 help 1027 This is the IBM POWER Virtual FC Client 1028 1029 To compile this driver as a module, choose M here: the 1030 module will be called ibmvfc. 1031 1032config SCSI_IBMVFC_TRACE 1033 bool "enable driver internal trace" 1034 depends on SCSI_IBMVFC 1035 default y 1036 help 1037 If you say Y here, the driver will trace all commands issued 1038 to the adapter. Performance impact is minimal. Trace can be 1039 dumped using /sys/class/scsi_host/hostXX/trace. 1040 1041config SCSI_INITIO 1042 tristate "Initio 9100U(W) support" 1043 depends on PCI && SCSI 1044 help 1045 This is support for the Initio 91XXU(W) SCSI host adapter. Please 1046 read the SCSI-HOWTO, available from 1047 <http://www.tldp.org/docs.html#howto>. 1048 1049 To compile this driver as a module, choose M here: the 1050 module will be called initio. 1051 1052config SCSI_INIA100 1053 tristate "Initio INI-A100U2W support" 1054 depends on PCI && SCSI 1055 help 1056 This is support for the Initio INI-A100U2W SCSI host adapter. 1057 Please read the SCSI-HOWTO, available from 1058 <http://www.tldp.org/docs.html#howto>. 1059 1060 To compile this driver as a module, choose M here: the 1061 module will be called a100u2w. 1062 1063config SCSI_PPA 1064 tristate "IOMEGA parallel port (ppa - older drives)" 1065 depends on SCSI && PARPORT_PC 1066 ---help--- 1067 This driver supports older versions of IOMEGA's parallel port ZIP 1068 drive (a 100 MB removable media device). 1069 1070 Note that you can say N here if you have the SCSI version of the ZIP 1071 drive: it will be supported automatically if you said Y to the 1072 generic "SCSI disk support", above. 1073 1074 If you have the ZIP Plus drive or a more recent parallel port ZIP 1075 drive (if the supplied cable with the drive is labeled "AutoDetect") 1076 then you should say N here and Y to "IOMEGA parallel port (imm - 1077 newer drives)", below. 1078 1079 For more information about this driver and how to use it you should 1080 read the file <file:Documentation/scsi/ppa.txt>. You should also read 1081 the SCSI-HOWTO, which is available from 1082 <http://www.tldp.org/docs.html#howto>. If you use this driver, 1083 you will still be able to use the parallel port for other tasks, 1084 such as a printer; it is safe to compile both drivers into the 1085 kernel. 1086 1087 To compile this driver as a module, choose M here: the 1088 module will be called ppa. 1089 1090config SCSI_IMM 1091 tristate "IOMEGA parallel port (imm - newer drives)" 1092 depends on SCSI && PARPORT_PC 1093 ---help--- 1094 This driver supports newer versions of IOMEGA's parallel port ZIP 1095 drive (a 100 MB removable media device). 1096 1097 Note that you can say N here if you have the SCSI version of the ZIP 1098 drive: it will be supported automatically if you said Y to the 1099 generic "SCSI disk support", above. 1100 1101 If you have the ZIP Plus drive or a more recent parallel port ZIP 1102 drive (if the supplied cable with the drive is labeled "AutoDetect") 1103 then you should say Y here; if you have an older ZIP drive, say N 1104 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above. 1105 1106 For more information about this driver and how to use it you should 1107 read the file <file:Documentation/scsi/ppa.txt>. You should also read 1108 the SCSI-HOWTO, which is available from 1109 <http://www.tldp.org/docs.html#howto>. If you use this driver, 1110 you will still be able to use the parallel port for other tasks, 1111 such as a printer; it is safe to compile both drivers into the 1112 kernel. 1113 1114 To compile this driver as a module, choose M here: the 1115 module will be called imm. 1116 1117config SCSI_IZIP_EPP16 1118 bool "ppa/imm option - Use slow (but safe) EPP-16" 1119 depends on SCSI_PPA || SCSI_IMM 1120 ---help--- 1121 EPP (Enhanced Parallel Port) is a standard for parallel ports which 1122 allows them to act as expansion buses that can handle up to 64 1123 peripheral devices. 1124 1125 Some parallel port chipsets are slower than their motherboard, and 1126 so we have to control the state of the chipset's FIFO queue every 1127 now and then to avoid data loss. This will be done if you say Y 1128 here. 1129 1130 Generally, saying Y is the safe option and slows things down a bit. 1131 1132config SCSI_IZIP_SLOW_CTR 1133 bool "ppa/imm option - Assume slow parport control register" 1134 depends on SCSI_PPA || SCSI_IMM 1135 help 1136 Some parallel ports are known to have excessive delays between 1137 changing the parallel port control register and good data being 1138 available on the parallel port data/status register. This option 1139 forces a small delay (1.0 usec to be exact) after changing the 1140 control register to let things settle out. Enabling this option may 1141 result in a big drop in performance but some very old parallel ports 1142 (found in 386 vintage machines) will not work properly. 1143 1144 Generally, saying N is fine. 1145 1146config SCSI_NCR53C406A 1147 tristate "NCR53c406a SCSI support" 1148 depends on ISA && SCSI 1149 help 1150 This is support for the NCR53c406a SCSI host adapter. For user 1151 configurable parameters, check out <file:drivers/scsi/NCR53c406a.c> 1152 in the kernel source. Also read the SCSI-HOWTO, available from 1153 <http://www.tldp.org/docs.html#howto>. 1154 1155 To compile this driver as a module, choose M here: the 1156 module will be called NCR53c406. 1157 1158config SCSI_NCR_D700 1159 tristate "NCR Dual 700 MCA SCSI support" 1160 depends on MCA && SCSI 1161 select SCSI_SPI_ATTRS 1162 help 1163 This is a driver for the MicroChannel Dual 700 card produced by 1164 NCR and commonly used in 345x/35xx/4100 class machines. It always 1165 tries to negotiate sync and uses tag command queueing. 1166 1167 Unless you have an NCR manufactured machine, the chances are that 1168 you do not have this SCSI card, so say N. 1169 1170config SCSI_LASI700 1171 tristate "HP Lasi SCSI support for 53c700/710" 1172 depends on GSC && SCSI 1173 select SCSI_SPI_ATTRS 1174 help 1175 This is a driver for the SCSI controller in the Lasi chip found in 1176 many PA-RISC workstations & servers. If you do not know whether you 1177 have a Lasi chip, it is safe to say "Y" here. 1178 1179config SCSI_SNI_53C710 1180 tristate "SNI RM SCSI support for 53c710" 1181 depends on SNI_RM && SCSI 1182 select SCSI_SPI_ATTRS 1183 select 53C700_LE_ON_BE 1184 help 1185 This is a driver for the onboard SCSI controller found in older 1186 SNI RM workstations & servers. 1187 1188config 53C700_LE_ON_BE 1189 bool 1190 depends on SCSI_LASI700 1191 default y 1192 1193config SCSI_STEX 1194 tristate "Promise SuperTrak EX Series support" 1195 depends on PCI && SCSI 1196 ---help--- 1197 This driver supports Promise SuperTrak EX series storage controllers. 1198 1199 Promise provides Linux RAID configuration utility for these 1200 controllers. Please visit <http://www.promise.com> to download. 1201 1202 To compile this driver as a module, choose M here: the 1203 module will be called stex. 1204 1205config 53C700_BE_BUS 1206 bool 1207 depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI 1208 default y 1209 1210config SCSI_SYM53C8XX_2 1211 tristate "SYM53C8XX Version 2 SCSI support" 1212 depends on PCI && SCSI 1213 select SCSI_SPI_ATTRS 1214 ---help--- 1215 This driver supports the whole NCR53C8XX/SYM53C8XX family of 1216 PCI-SCSI controllers. It also supports the subset of LSI53C10XX 1217 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS 1218 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI 1219 controllers; you need to use the Fusion MPT driver for that. 1220 1221 Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more 1222 information. 1223 1224config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE 1225 int "DMA addressing mode" 1226 depends on SCSI_SYM53C8XX_2 1227 default "1" 1228 ---help--- 1229 This option only applies to PCI-SCSI chips that are PCI DAC 1230 capable (875A, 895A, 896, 1010-33, 1010-66, 1000). 1231 1232 When set to 0, the driver will program the chip to only perform 1233 32-bit DMA. When set to 1, the chip will be able to perform DMA 1234 to addresses up to 1TB. When set to 2, the driver supports the 1235 full 64-bit DMA address range, but can only address 16 segments 1236 of 4 GB each. This limits the total addressable range to 64 GB. 1237 1238 Most machines with less than 4GB of memory should use a setting 1239 of 0 for best performance. If your machine has 4GB of memory 1240 or more, you should set this option to 1 (the default). 1241 1242 The still experimental value 2 (64 bit DMA addressing with 16 1243 x 4GB segments limitation) can be used on systems that require 1244 PCI address bits past bit 39 to be set for the addressing of 1245 memory using PCI DAC cycles. 1246 1247config SCSI_SYM53C8XX_DEFAULT_TAGS 1248 int "Default tagged command queue depth" 1249 depends on SCSI_SYM53C8XX_2 1250 default "16" 1251 help 1252 This is the default value of the command queue depth the 1253 driver will announce to the generic SCSI layer for devices 1254 that support tagged command queueing. This value can be changed 1255 from the boot command line. This is a soft limit that cannot 1256 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS. 1257 1258config SCSI_SYM53C8XX_MAX_TAGS 1259 int "Maximum number of queued commands" 1260 depends on SCSI_SYM53C8XX_2 1261 default "64" 1262 help 1263 This option allows you to specify the maximum number of commands 1264 that can be queued to any device, when tagged command queuing is 1265 possible. The driver supports up to 256 queued commands per device. 1266 This value is used as a compiled-in hard limit. 1267 1268config SCSI_SYM53C8XX_MMIO 1269 bool "Use memory mapped IO" 1270 depends on SCSI_SYM53C8XX_2 1271 default y 1272 help 1273 Memory mapped IO is faster than Port IO. Most people should 1274 answer Y here, but some machines may have problems. If you have 1275 to answer N here, please report the problem to the maintainer. 1276 1277config SCSI_IPR 1278 tristate "IBM Power Linux RAID adapter support" 1279 depends on PCI && SCSI && ATA 1280 select FW_LOADER 1281 ---help--- 1282 This driver supports the IBM Power Linux family RAID adapters. 1283 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well 1284 as IBM iSeries 5702, 5703, 5709, and 570A. 1285 1286config SCSI_IPR_TRACE 1287 bool "enable driver internal trace" 1288 depends on SCSI_IPR 1289 default y 1290 help 1291 If you say Y here, the driver will trace all commands issued 1292 to the adapter. Performance impact is minimal. Trace can be 1293 dumped using /sys/bus/class/scsi_host/hostXX/trace. 1294 1295config SCSI_IPR_DUMP 1296 bool "enable adapter dump support" 1297 depends on SCSI_IPR 1298 default y 1299 help 1300 If you say Y here, the driver will support adapter crash dump. 1301 If you enable this support, the iprdump daemon can be used 1302 to capture adapter failure analysis information. 1303 1304config SCSI_ZALON 1305 tristate "Zalon SCSI support" 1306 depends on GSC && SCSI 1307 select SCSI_SPI_ATTRS 1308 help 1309 The Zalon is a GSC/HSC bus interface chip that sits between the 1310 PA-RISC processor and the NCR 53c720 SCSI controller on C100, 1311 C110, J200, J210 and some D, K & R-class machines. It's also 1312 used on the add-in Bluefish, Barracuda & Shrike SCSI cards. 1313 Say Y here if you have one of these machines or cards. 1314 1315config SCSI_NCR_Q720 1316 tristate "NCR Quad 720 MCA SCSI support" 1317 depends on MCA && SCSI 1318 select SCSI_SPI_ATTRS 1319 help 1320 This is a driver for the MicroChannel Quad 720 card produced by 1321 NCR and commonly used in 345x/35xx/4100 class machines. It always 1322 tries to negotiate sync and uses tag command queueing. 1323 1324 Unless you have an NCR manufactured machine, the chances are that 1325 you do not have this SCSI card, so say N. 1326 1327config SCSI_NCR53C8XX_DEFAULT_TAGS 1328 int "default tagged command queue depth" 1329 depends on SCSI_ZALON || SCSI_NCR_Q720 1330 default "8" 1331 ---help--- 1332 "Tagged command queuing" is a feature of SCSI-2 which improves 1333 performance: the host adapter can send several SCSI commands to a 1334 device's queue even if previous commands haven't finished yet. 1335 Because the device is intelligent, it can optimize its operations 1336 (like head positioning) based on its own request queue. Some SCSI 1337 devices don't implement this properly; if you want to disable this 1338 feature, enter 0 or 1 here (it doesn't matter which). 1339 1340 The default value is 8 and should be supported by most hard disks. 1341 This value can be overridden from the boot command line using the 1342 'tags' option as follows (example): 1343 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to 1344 4, set queue depth to 16 for target 2 and target 3 on controller 0 1345 and set queue depth to 10 for target 0 / lun 2 on controller 1. 1346 1347 The normal answer therefore is to go with the default 8 and to use 1348 a boot command line option for devices that need to use a different 1349 command queue depth. 1350 1351 There is no safe option other than using good SCSI devices. 1352 1353config SCSI_NCR53C8XX_MAX_TAGS 1354 int "maximum number of queued commands" 1355 depends on SCSI_ZALON || SCSI_NCR_Q720 1356 default "32" 1357 ---help--- 1358 This option allows you to specify the maximum number of commands 1359 that can be queued to any device, when tagged command queuing is 1360 possible. The default value is 32. Minimum is 2, maximum is 64. 1361 Modern hard disks are able to support 64 tags and even more, but 1362 do not seem to be faster when more than 32 tags are being used. 1363 1364 So, the normal answer here is to go with the default value 32 unless 1365 you are using very large hard disks with large cache (>= 1 MB) that 1366 are able to take advantage of more than 32 tagged commands. 1367 1368 There is no safe option and the default answer is recommended. 1369 1370config SCSI_NCR53C8XX_SYNC 1371 int "synchronous transfers frequency in MHz" 1372 depends on SCSI_ZALON || SCSI_NCR_Q720 1373 default "20" 1374 ---help--- 1375 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer 1376 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers 1377 are respectively the maximum data transfer rates in mega-transfers 1378 per second for each class. For example, a FAST-20 Wide 16 device is 1379 able to transfer data at 20 million 16 bit packets per second for a 1380 total rate of 40 MB/s. 1381 1382 You may specify 0 if you want to only use asynchronous data 1383 transfers. This is the safest and slowest option. Otherwise, specify 1384 a value between 5 and 80, depending on the capability of your SCSI 1385 controller. The higher the number, the faster the data transfer. 1386 Note that 80 should normally be ok since the driver decreases the 1387 value automatically according to the controller's capabilities. 1388 1389 Your answer to this question is ignored for controllers with NVRAM, 1390 since the driver will get this information from the user set-up. It 1391 also can be overridden using a boot setup option, as follows 1392 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate 1393 for FAST-20 synchronous data transfer (20 mega-transfers per 1394 second). 1395 1396 The normal answer therefore is not to go with the default but to 1397 select the maximum value 80 allowing the driver to use the maximum 1398 value supported by each controller. If this causes problems with 1399 your SCSI devices, you should come back and decrease the value. 1400 1401 There is no safe option other than using good cabling, right 1402 terminations and SCSI conformant devices. 1403 1404config SCSI_NCR53C8XX_NO_DISCONNECT 1405 bool "not allow targets to disconnect" 1406 depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0 1407 help 1408 This option is only provided for safety if you suspect some SCSI 1409 device of yours to not support properly the target-disconnect 1410 feature. In that case, you would say Y here. In general however, to 1411 not allow targets to disconnect is not reasonable if there is more 1412 than 1 device on a SCSI bus. The normal answer therefore is N. 1413 1414config SCSI_PAS16 1415 tristate "PAS16 SCSI support" 1416 depends on ISA && SCSI 1417 select SCSI_SPI_ATTRS 1418 ---help--- 1419 This is support for a SCSI host adapter. It is explained in section 1420 3.10 of the SCSI-HOWTO, available from 1421 <http://www.tldp.org/docs.html#howto>. If it doesn't work out 1422 of the box, you may have to change some settings in 1423 <file:drivers/scsi/pas16.h>. 1424 1425 To compile this driver as a module, choose M here: the 1426 module will be called pas16. 1427 1428config SCSI_QLOGIC_FAS 1429 tristate "Qlogic FAS SCSI support" 1430 depends on ISA && SCSI 1431 ---help--- 1432 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic 1433 FastSCSI! cards as well as any other card based on the FASXX chip 1434 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards). 1435 1436 This driver does NOT support the PCI versions of these cards. The 1437 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP 1438 SCSI support"), below. 1439 1440 Information about this driver is contained in 1441 <file:Documentation/scsi/qlogicfas.txt>. You should also read the 1442 SCSI-HOWTO, available from 1443 <http://www.tldp.org/docs.html#howto>. 1444 1445 To compile this driver as a module, choose M here: the 1446 module will be called qlogicfas. 1447 1448config SCSI_QLOGIC_1280 1449 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support" 1450 depends on PCI && SCSI 1451 help 1452 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter. 1453 1454 To compile this driver as a module, choose M here: the 1455 module will be called qla1280. 1456 1457config SCSI_QLOGICPTI 1458 tristate "PTI Qlogic, ISP Driver" 1459 depends on SBUS && SCSI 1460 help 1461 This driver supports SBUS SCSI controllers from PTI or QLogic. These 1462 controllers are known under Solaris as qpti and in the openprom as 1463 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are 1464 driven by a different driver. 1465 1466 To compile this driver as a module, choose M here: the 1467 module will be called qlogicpti. 1468 1469source "drivers/scsi/qla2xxx/Kconfig" 1470source "drivers/scsi/qla4xxx/Kconfig" 1471 1472config SCSI_LPFC 1473 tristate "Emulex LightPulse Fibre Channel Support" 1474 depends on PCI && SCSI 1475 select SCSI_FC_ATTRS 1476 help 1477 This lpfc driver supports the Emulex LightPulse 1478 Family of Fibre Channel PCI host adapters. 1479 1480config SCSI_LPFC_DEBUG_FS 1481 bool "Emulex LightPulse Fibre Channel debugfs Support" 1482 depends on SCSI_LPFC && DEBUG_FS 1483 help 1484 This makes debugging information from the lpfc driver 1485 available via the debugfs filesystem. 1486 1487config SCSI_SIM710 1488 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" 1489 depends on (EISA || MCA) && SCSI 1490 select SCSI_SPI_ATTRS 1491 ---help--- 1492 This driver is for NCR53c710 based SCSI host adapters. 1493 1494 It currently supports Compaq EISA cards and NCR MCA cards 1495 1496config SCSI_SYM53C416 1497 tristate "Symbios 53c416 SCSI support" 1498 depends on ISA && SCSI 1499 ---help--- 1500 This is support for the sym53c416 SCSI host adapter, the SCSI 1501 adapter that comes with some HP scanners. This driver requires that 1502 the sym53c416 is configured first using some sort of PnP 1503 configuration program (e.g. isapnp) or by a PnP aware BIOS. If you 1504 are using isapnp then you need to compile this driver as a module 1505 and then load it using insmod after isapnp has run. The parameters 1506 of the configured card(s) should be passed to the driver. The format 1507 is: 1508 1509 insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>] 1510 1511 To compile this driver as a module, choose M here: the 1512 module will be called sym53c416. 1513 1514config SCSI_DC395x 1515 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)" 1516 depends on PCI && SCSI && EXPERIMENTAL 1517 ---help--- 1518 This driver supports PCI SCSI host adapters based on the ASIC 1519 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants. 1520 1521 This driver works, but is still in experimental status. So better 1522 have a bootable disk and a backup in case of emergency. 1523 1524 Documentation can be found in <file:Documentation/scsi/dc395x.txt>. 1525 1526 To compile this driver as a module, choose M here: the 1527 module will be called dc395x. 1528 1529config SCSI_DC390T 1530 tristate "Tekram DC390(T) and Am53/79C974 SCSI support" 1531 depends on PCI && SCSI 1532 ---help--- 1533 This driver supports PCI SCSI host adapters based on the Am53C974A 1534 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard 1535 PCscsi/PCnet (Am53/79C974) solutions. 1536 1537 Documentation can be found in <file:Documentation/scsi/tmscsim.txt>. 1538 1539 Note that this driver does NOT support Tekram DC390W/U/F, which are 1540 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those. 1541 1542 To compile this driver as a module, choose M here: the 1543 module will be called tmscsim. 1544 1545config SCSI_T128 1546 tristate "Trantor T128/T128F/T228 SCSI support" 1547 depends on ISA && SCSI 1548 select SCSI_SPI_ATTRS 1549 select CHECK_SIGNATURE 1550 ---help--- 1551 This is support for a SCSI host adapter. It is explained in section 1552 3.11 of the SCSI-HOWTO, available from 1553 <http://www.tldp.org/docs.html#howto>. If it doesn't work out 1554 of the box, you may have to change some settings in 1555 <file:drivers/scsi/t128.h>. Note that Trantor was purchased by 1556 Adaptec, and some former Trantor products are being sold under the 1557 Adaptec name. 1558 1559 To compile this driver as a module, choose M here: the 1560 module will be called t128. 1561 1562config SCSI_U14_34F 1563 tristate "UltraStor 14F/34F support" 1564 depends on ISA && SCSI && ISA_DMA_API 1565 ---help--- 1566 This is support for the UltraStor 14F and 34F SCSI-2 host adapters. 1567 The source at <file:drivers/scsi/u14-34f.c> contains some 1568 information about this hardware. If the driver doesn't work out of 1569 the box, you may have to change some settings in 1570 <file: drivers/scsi/u14-34f.c>. Read the SCSI-HOWTO, available from 1571 <http://www.tldp.org/docs.html#howto>. Note that there is also 1572 another driver for the same hardware: "UltraStor SCSI support", 1573 below. You should say Y to both only if you want 24F support as 1574 well. 1575 1576 To compile this driver as a module, choose M here: the 1577 module will be called u14-34f. 1578 1579config SCSI_U14_34F_TAGGED_QUEUE 1580 bool "enable tagged command queueing" 1581 depends on SCSI_U14_34F 1582 help 1583 This is a feature of SCSI-2 which improves performance: the host 1584 adapter can send several SCSI commands to a device's queue even if 1585 previous commands haven't finished yet. 1586 This is equivalent to the "u14-34f=tc:y" boot option. 1587 1588config SCSI_U14_34F_LINKED_COMMANDS 1589 bool "enable elevator sorting" 1590 depends on SCSI_U14_34F 1591 help 1592 This option enables elevator sorting for all probed SCSI disks and 1593 CD-ROMs. It definitely reduces the average seek distance when doing 1594 random seeks, but this does not necessarily result in a noticeable 1595 performance improvement: your mileage may vary... 1596 This is equivalent to the "u14-34f=lc:y" boot option. 1597 1598config SCSI_U14_34F_MAX_TAGS 1599 int "maximum number of queued commands" 1600 depends on SCSI_U14_34F 1601 default "8" 1602 help 1603 This specifies how many SCSI commands can be maximally queued for 1604 each probed SCSI device. You should reduce the default value of 8 1605 only if you have disks with buggy or limited tagged command support. 1606 Minimum is 2 and maximum is 14. This value is also the window size 1607 used by the elevator sorting option above. The effective value used 1608 by the driver for each probed SCSI device is reported at boot time. 1609 This is equivalent to the "u14-34f=mq:8" boot option. 1610 1611config SCSI_ULTRASTOR 1612 tristate "UltraStor SCSI support" 1613 depends on X86 && ISA && SCSI 1614 ---help--- 1615 This is support for the UltraStor 14F, 24F and 34F SCSI-2 host 1616 adapter family. This driver is explained in section 3.12 of the 1617 SCSI-HOWTO, available from 1618 <http://www.tldp.org/docs.html#howto>. If it doesn't work out 1619 of the box, you may have to change some settings in 1620 <file:drivers/scsi/ultrastor.h>. 1621 1622 Note that there is also another driver for the same hardware: 1623 "UltraStor 14F/34F support", above. 1624 1625 To compile this driver as a module, choose M here: the 1626 module will be called ultrastor. 1627 1628config SCSI_NSP32 1629 tristate "Workbit NinjaSCSI-32Bi/UDE support" 1630 depends on PCI && SCSI && !64BIT 1631 help 1632 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus 1633 SCSI host adapter. Please read the SCSI-HOWTO, available from 1634 <http://www.tldp.org/docs.html#howto>. 1635 1636 To compile this driver as a module, choose M here: the 1637 module will be called nsp32. 1638 1639config SCSI_DEBUG 1640 tristate "SCSI debugging host simulator" 1641 depends on SCSI 1642 select CRC_T10DIF 1643 help 1644 This is a host adapter simulator that can simulate multiple hosts 1645 each with multiple dummy SCSI devices (disks). It defaults to one 1646 host adapter with one dummy SCSI disk. Each dummy disk uses kernel 1647 RAM as storage (i.e. it is a ramdisk). To save space when multiple 1648 dummy disks are simulated, they share the same kernel RAM for 1649 their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more 1650 information. This driver is primarily of use to those testing the 1651 SCSI and block subsystems. If unsure, say N. 1652 1653config SCSI_MESH 1654 tristate "MESH (Power Mac internal SCSI) support" 1655 depends on PPC32 && PPC_PMAC && SCSI 1656 help 1657 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced 1658 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the 1659 other Power Macintoshes do). Say Y to include support for this SCSI 1660 adaptor. 1661 1662 To compile this driver as a module, choose M here: the 1663 module will be called mesh. 1664 1665config SCSI_MESH_SYNC_RATE 1666 int "maximum synchronous transfer rate (MB/s) (0 = async)" 1667 depends on SCSI_MESH 1668 default "5" 1669 help 1670 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor 1671 drives a bus which is entirely internal to the machine (such as the 1672 7500, 7600, 8500, etc.), the MESH is capable of synchronous 1673 operation at up to 10 MB/s. On machines where the SCSI bus 1674 controlled by the MESH can have external devices connected, it is 1675 usually rated at 5 MB/s. 5 is a safe value here unless you know the 1676 MESH SCSI bus is internal only; in that case you can say 10. Say 0 1677 to disable synchronous operation. 1678 1679config SCSI_MESH_RESET_DELAY_MS 1680 int "initial bus reset delay (ms) (0 = no reset)" 1681 depends on SCSI_MESH 1682 default "4000" 1683 1684config SCSI_MAC53C94 1685 tristate "53C94 (Power Mac external SCSI) support" 1686 depends on PPC32 && PPC_PMAC && SCSI 1687 help 1688 On Power Macintoshes (and clones) with two SCSI buses, the external 1689 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older 1690 machines which only have one SCSI bus, such as the 7200, also use 1691 the 53C94. Say Y to include support for the 53C94. 1692 1693 To compile this driver as a module, choose M here: the 1694 module will be called mac53c94. 1695 1696source "drivers/scsi/arm/Kconfig" 1697 1698config JAZZ_ESP 1699 bool "MIPS JAZZ FAS216 SCSI support" 1700 depends on MACH_JAZZ && SCSI 1701 select SCSI_SPI_ATTRS 1702 help 1703 This is the driver for the onboard SCSI host adapter of MIPS Magnum 1704 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM 1705 systems. 1706 1707config A3000_SCSI 1708 tristate "A3000 WD33C93A support" 1709 depends on AMIGA && SCSI 1710 help 1711 If you have an Amiga 3000 and have SCSI devices connected to the 1712 built-in SCSI controller, say Y. Otherwise, say N. 1713 1714 To compile this driver as a module, choose M here: the 1715 module will be called a3000. 1716 1717config A2091_SCSI 1718 tristate "A2091/A590 WD33C93A support" 1719 depends on ZORRO && SCSI 1720 help 1721 If you have a Commodore A2091 SCSI controller, say Y. Otherwise, 1722 say N. 1723 1724 To compile this driver as a module, choose M here: the 1725 module will be called a2091. 1726 1727config GVP11_SCSI 1728 tristate "GVP Series II WD33C93A support" 1729 depends on ZORRO && SCSI 1730 ---help--- 1731 If you have a Great Valley Products Series II SCSI controller, 1732 answer Y. Also say Y if you have a later model of GVP SCSI 1733 controller (such as the GVP A4008 or a Combo board). Otherwise, 1734 answer N. This driver does NOT work for the T-Rex series of 1735 accelerators from TekMagic and GVP-M. 1736 1737 To compile this driver as a module, choose M here: the 1738 module will be called gvp11. 1739 1740config SCSI_A4000T 1741 tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)" 1742 depends on AMIGA && SCSI && EXPERIMENTAL 1743 select SCSI_SPI_ATTRS 1744 help 1745 If you have an Amiga 4000T and have SCSI devices connected to the 1746 built-in SCSI controller, say Y. Otherwise, say N. 1747 1748 To compile this driver as a module, choose M here: the 1749 module will be called a4000t. 1750 1751config SCSI_ZORRO7XX 1752 tristate "Zorro NCR53c710 SCSI support (EXPERIMENTAL)" 1753 depends on ZORRO && SCSI && EXPERIMENTAL 1754 select SCSI_SPI_ATTRS 1755 help 1756 Support for various NCR53c710-based SCSI controllers on Zorro 1757 expansion boards for the Amiga. 1758 This includes: 1759 - the Amiga 4091 Zorro III SCSI-2 controller, 1760 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller 1761 (info at 1762 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>), 1763 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+ 1764 accelerator card for the Amiga 1200, 1765 - the SCSI controller on the GVP Turbo 040/060 accelerator. 1766 1767config ATARI_SCSI 1768 tristate "Atari native SCSI support" 1769 depends on ATARI && SCSI 1770 select SCSI_SPI_ATTRS 1771 select NVRAM 1772 ---help--- 1773 If you have an Atari with built-in NCR5380 SCSI controller (TT, 1774 Falcon, ...) say Y to get it supported. Of course also, if you have 1775 a compatible SCSI controller (e.g. for Medusa). 1776 1777 To compile this driver as a module, choose M here: the 1778 module will be called atari_scsi. 1779 1780 This driver supports both styles of NCR integration into the 1781 system: the TT style (separate DMA), and the Falcon style (via 1782 ST-DMA, replacing ACSI). It does NOT support other schemes, like 1783 in the Hades (without DMA). 1784 1785config ATARI_SCSI_TOSHIBA_DELAY 1786 bool "Long delays for Toshiba CD-ROMs" 1787 depends on ATARI_SCSI 1788 help 1789 This option increases the delay after a SCSI arbitration to 1790 accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to 1791 use a Toshiba CD-ROM drive; otherwise, the option is not needed and 1792 would impact performance a bit, so say N. 1793 1794config ATARI_SCSI_RESET_BOOT 1795 bool "Reset SCSI-devices at boottime" 1796 depends on ATARI_SCSI 1797 help 1798 Reset the devices on your Atari whenever it boots. This makes the 1799 boot process fractionally longer but may assist recovery from errors 1800 that leave the devices with SCSI operations partway completed. 1801 1802config MAC_SCSI 1803 bool "Macintosh NCR5380 SCSI" 1804 depends on MAC && SCSI=y 1805 select SCSI_SPI_ATTRS 1806 help 1807 This is the NCR 5380 SCSI controller included on most of the 68030 1808 based Macintoshes. If you have one of these say Y and read the 1809 SCSI-HOWTO, available from 1810 <http://www.tldp.org/docs.html#howto>. 1811 1812config SCSI_MAC_ESP 1813 tristate "Macintosh NCR53c9[46] SCSI" 1814 depends on MAC && SCSI 1815 select SCSI_SPI_ATTRS 1816 help 1817 This is the NCR 53c9x SCSI controller found on most of the 68040 1818 based Macintoshes. 1819 1820 To compile this driver as a module, choose M here: the module 1821 will be called mac_esp. 1822 1823config MVME147_SCSI 1824 bool "WD33C93 SCSI driver for MVME147" 1825 depends on MVME147 && SCSI=y 1826 select SCSI_SPI_ATTRS 1827 help 1828 Support for the on-board SCSI controller on the Motorola MVME147 1829 single-board computer. 1830 1831config MVME16x_SCSI 1832 tristate "NCR53C710 SCSI driver for MVME16x" 1833 depends on MVME16x && SCSI 1834 select SCSI_SPI_ATTRS 1835 help 1836 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 1837 SCSI controller chip. Almost everyone using one of these boards 1838 will want to say Y to this question. 1839 1840config BVME6000_SCSI 1841 tristate "NCR53C710 SCSI driver for BVME6000" 1842 depends on BVME6000 && SCSI 1843 select SCSI_SPI_ATTRS 1844 help 1845 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 1846 SCSI controller chip. Almost everyone using one of these boards 1847 will want to say Y to this question. 1848 1849config SUN3_SCSI 1850 tristate "Sun3 NCR5380 SCSI" 1851 depends on SUN3 && SCSI 1852 select SCSI_SPI_ATTRS 1853 help 1854 This option will enable support for the OBIO (onboard io) NCR5380 1855 SCSI controller found in the Sun 3/50 and 3/60, as well as for 1856 "Sun3" type VME scsi controllers also based on the NCR5380. 1857 General Linux information on the Sun 3 series (now discontinued) 1858 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. 1859 1860config SUN3X_ESP 1861 bool "Sun3x ESP SCSI" 1862 depends on SUN3X && SCSI=y 1863 select SCSI_SPI_ATTRS 1864 help 1865 The ESP was an on-board SCSI controller used on Sun 3/80 1866 machines. Say Y here to compile in support for it. 1867 1868config SCSI_SUNESP 1869 tristate "Sparc ESP Scsi Driver" 1870 depends on SBUS && SCSI 1871 select SCSI_SPI_ATTRS 1872 help 1873 This is the driver for the Sun ESP SCSI host adapter. The ESP 1874 chipset is present in most SPARC SBUS-based computers and 1875 supports the Emulex family of ESP SCSI chips (esp100, esp100A, 1876 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip. 1877 1878 To compile this driver as a module, choose M here: the 1879 module will be called sun_esp. 1880 1881config ZFCP 1882 tristate "FCP host bus adapter driver for IBM eServer zSeries" 1883 depends on S390 && QDIO && SCSI 1884 select SCSI_FC_ATTRS 1885 help 1886 If you want to access SCSI devices attached to your IBM eServer 1887 zSeries by means of Fibre Channel interfaces say Y. 1888 For details please refer to the documentation provided by IBM at 1889 <http://oss.software.ibm.com/developerworks/opensource/linux390> 1890 1891 This driver is also available as a module. This module will be 1892 called zfcp. If you want to compile it as a module, say M here 1893 and read <file:Documentation/kbuild/modules.txt>. 1894 1895config ZFCP_DIF 1896 tristate "T10 DIF/DIX support for the zfcp driver (EXPERIMENTAL)" 1897 depends on ZFCP && EXPERIMENTAL 1898 1899config SCSI_PMCRAID 1900 tristate "PMC SIERRA Linux MaxRAID adapter support" 1901 depends on PCI && SCSI && NET 1902 ---help--- 1903 This driver supports the PMC SIERRA MaxRAID adapters. 1904 1905config SCSI_PM8001 1906 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver" 1907 depends on PCI && SCSI 1908 select SCSI_SAS_LIBSAS 1909 help 1910 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip 1911 based host adapters. 1912 1913config SCSI_SRP 1914 tristate "SCSI RDMA Protocol helper library" 1915 depends on SCSI && PCI 1916 select SCSI_TGT 1917 help 1918 If you wish to use SRP target drivers, say Y. 1919 1920 To compile this driver as a module, choose M here: the 1921 module will be called libsrp. 1922 1923config SCSI_BFA_FC 1924 tristate "Brocade BFA Fibre Channel Support" 1925 depends on PCI && SCSI 1926 select SCSI_FC_ATTRS 1927 help 1928 This bfa driver supports all Brocade PCIe FC/FCOE host adapters. 1929 1930 To compile this driver as a module, choose M here. The module will 1931 be called bfa. 1932 1933endif # SCSI_LOWLEVEL 1934 1935source "drivers/scsi/pcmcia/Kconfig" 1936 1937source "drivers/scsi/device_handler/Kconfig" 1938 1939source "drivers/scsi/osd/Kconfig" 1940 1941endmenu 1942