1 /* -*- mode: c; c-basic-offset: 8 -*- */ 2 3 /* NCR (or Symbios) 53c700 and 53c700-66 Driver 4 * 5 * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com 6 **----------------------------------------------------------------------------- 7 ** 8 ** This program is free software; you can redistribute it and/or modify 9 ** it under the terms of the GNU General Public License as published by 10 ** the Free Software Foundation; either version 2 of the License, or 11 ** (at your option) any later version. 12 ** 13 ** This program is distributed in the hope that it will be useful, 14 ** but WITHOUT ANY WARRANTY; without even the implied warranty of 15 ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 ** GNU General Public License for more details. 17 ** 18 ** You should have received a copy of the GNU General Public License 19 ** along with this program; if not, write to the Free Software 20 ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 ** 22 **----------------------------------------------------------------------------- 23 */ 24 25 /* Notes: 26 * 27 * This driver is designed exclusively for these chips (virtually the 28 * earliest of the scripts engine chips). They need their own drivers 29 * because they are missing so many of the scripts and snazzy register 30 * features of their elder brothers (the 710, 720 and 770). 31 * 32 * The 700 is the lowliest of the line, it can only do async SCSI. 33 * The 700-66 can at least do synchronous SCSI up to 10MHz. 34 * 35 * The 700 chip has no host bus interface logic of its own. However, 36 * it is usually mapped to a location with well defined register 37 * offsets. Therefore, if you can determine the base address and the 38 * irq your board incorporating this chip uses, you can probably use 39 * this driver to run it (although you'll probably have to write a 40 * minimal wrapper for the purpose---see the NCR_D700 driver for 41 * details about how to do this). 42 * 43 * 44 * TODO List: 45 * 46 * 1. Better statistics in the proc fs 47 * 48 * 2. Implement message queue (queues SCSI messages like commands) and make 49 * the abort and device reset functions use them. 50 * */ 51 52 /* CHANGELOG 53 * 54 * Version 2.8 55 * 56 * Fixed bad bug affecting tag starvation processing (previously the 57 * driver would hang the system if too many tags starved. Also fixed 58 * bad bug having to do with 10 byte command processing and REQUEST 59 * SENSE (the command would loop forever getting a transfer length 60 * mismatch in the CMD phase). 61 * 62 * Version 2.7 63 * 64 * Fixed scripts problem which caused certain devices (notably CDRWs) 65 * to hang on initial INQUIRY. Updated NCR_700_readl/writel to use 66 * __raw_readl/writel for parisc compatibility (Thomas 67 * Bogendoerfer). Added missing SCp->request_bufflen initialisation 68 * for sense requests (Ryan Bradetich). 69 * 70 * Version 2.6 71 * 72 * Following test of the 64 bit parisc kernel by Richard Hirst, 73 * several problems have now been corrected. Also adds support for 74 * consistent memory allocation. 75 * 76 * Version 2.5 77 * 78 * More Compatibility changes for 710 (now actually works). Enhanced 79 * support for odd clock speeds which constrain SDTR negotiations. 80 * correct cacheline separation for scsi messages and status for 81 * incoherent architectures. Use of the pci mapping functions on 82 * buffers to begin support for 64 bit drivers. 83 * 84 * Version 2.4 85 * 86 * Added support for the 53c710 chip (in 53c700 emulation mode only---no 87 * special 53c710 instructions or registers are used). 88 * 89 * Version 2.3 90 * 91 * More endianness/cache coherency changes. 92 * 93 * Better bad device handling (handles devices lying about tag 94 * queueing support and devices which fail to provide sense data on 95 * contingent allegiance conditions) 96 * 97 * Many thanks to Richard Hirst <rhirst@linuxcare.com> for patiently 98 * debugging this driver on the parisc architecture and suggesting 99 * many improvements and bug fixes. 100 * 101 * Thanks also go to Linuxcare Inc. for providing several PARISC 102 * machines for me to debug the driver on. 103 * 104 * Version 2.2 105 * 106 * Made the driver mem or io mapped; added endian invariance; added 107 * dma cache flushing operations for architectures which need it; 108 * added support for more varied clocking speeds. 109 * 110 * Version 2.1 111 * 112 * Initial modularisation from the D700. See NCR_D700.c for the rest of 113 * the changelog. 114 * */ 115 #define NCR_700_VERSION "2.8" 116 117 #include <linux/kernel.h> 118 #include <linux/types.h> 119 #include <linux/string.h> 120 #include <linux/slab.h> 121 #include <linux/ioport.h> 122 #include <linux/delay.h> 123 #include <linux/spinlock.h> 124 #include <linux/completion.h> 125 #include <linux/init.h> 126 #include <linux/proc_fs.h> 127 #include <linux/blkdev.h> 128 #include <linux/module.h> 129 #include <linux/interrupt.h> 130 #include <linux/device.h> 131 #include <asm/dma.h> 132 #include <asm/io.h> 133 #include <asm/pgtable.h> 134 #include <asm/byteorder.h> 135 136 #include <scsi/scsi.h> 137 #include <scsi/scsi_cmnd.h> 138 #include <scsi/scsi_dbg.h> 139 #include <scsi/scsi_eh.h> 140 #include <scsi/scsi_host.h> 141 #include <scsi/scsi_tcq.h> 142 #include <scsi/scsi_transport.h> 143 #include <scsi/scsi_transport_spi.h> 144 145 #include "53c700.h" 146 147 /* NOTE: For 64 bit drivers there are points in the code where we use 148 * a non dereferenceable pointer to point to a structure in dma-able 149 * memory (which is 32 bits) so that we can use all of the structure 150 * operations but take the address at the end. This macro allows us 151 * to truncate the 64 bit pointer down to 32 bits without the compiler 152 * complaining */ 153 #define to32bit(x) ((__u32)((unsigned long)(x))) 154 155 #ifdef NCR_700_DEBUG 156 #define STATIC 157 #else 158 #define STATIC static 159 #endif 160 161 MODULE_AUTHOR("James Bottomley"); 162 MODULE_DESCRIPTION("53c700 and 53c700-66 Driver"); 163 MODULE_LICENSE("GPL"); 164 165 /* This is the script */ 166 #include "53c700_d.h" 167 168 169 STATIC int NCR_700_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *); 170 STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt); 171 STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt); 172 STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt); 173 STATIC void NCR_700_chip_setup(struct Scsi_Host *host); 174 STATIC void NCR_700_chip_reset(struct Scsi_Host *host); 175 STATIC int NCR_700_slave_alloc(struct scsi_device *SDpnt); 176 STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt); 177 STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt); 178 static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth); 179 180 STATIC struct device_attribute *NCR_700_dev_attrs[]; 181 182 STATIC struct scsi_transport_template *NCR_700_transport_template = NULL; 183 184 static char *NCR_700_phase[] = { 185 "", 186 "after selection", 187 "before command phase", 188 "after command phase", 189 "after status phase", 190 "after data in phase", 191 "after data out phase", 192 "during data phase", 193 }; 194 195 static char *NCR_700_condition[] = { 196 "", 197 "NOT MSG_OUT", 198 "UNEXPECTED PHASE", 199 "NOT MSG_IN", 200 "UNEXPECTED MSG", 201 "MSG_IN", 202 "SDTR_MSG RECEIVED", 203 "REJECT_MSG RECEIVED", 204 "DISCONNECT_MSG RECEIVED", 205 "MSG_OUT", 206 "DATA_IN", 207 208 }; 209 210 static char *NCR_700_fatal_messages[] = { 211 "unexpected message after reselection", 212 "still MSG_OUT after message injection", 213 "not MSG_IN after selection", 214 "Illegal message length received", 215 }; 216 217 static char *NCR_700_SBCL_bits[] = { 218 "IO ", 219 "CD ", 220 "MSG ", 221 "ATN ", 222 "SEL ", 223 "BSY ", 224 "ACK ", 225 "REQ ", 226 }; 227 228 static char *NCR_700_SBCL_to_phase[] = { 229 "DATA_OUT", 230 "DATA_IN", 231 "CMD_OUT", 232 "STATE", 233 "ILLEGAL PHASE", 234 "ILLEGAL PHASE", 235 "MSG OUT", 236 "MSG IN", 237 }; 238 239 /* This translates the SDTR message offset and period to a value 240 * which can be loaded into the SXFER_REG. 241 * 242 * NOTE: According to SCSI-2, the true transfer period (in ns) is 243 * actually four times this period value */ 244 static inline __u8 245 NCR_700_offset_period_to_sxfer(struct NCR_700_Host_Parameters *hostdata, 246 __u8 offset, __u8 period) 247 { 248 int XFERP; 249 250 __u8 min_xferp = (hostdata->chip710 251 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP); 252 __u8 max_offset = (hostdata->chip710 253 ? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET); 254 255 if(offset == 0) 256 return 0; 257 258 if(period < hostdata->min_period) { 259 printk(KERN_WARNING "53c700: Period %dns is less than this chip's minimum, setting to %d\n", period*4, NCR_700_MIN_PERIOD*4); 260 period = hostdata->min_period; 261 } 262 XFERP = (period*4 * hostdata->sync_clock)/1000 - 4; 263 if(offset > max_offset) { 264 printk(KERN_WARNING "53c700: Offset %d exceeds chip maximum, setting to %d\n", 265 offset, max_offset); 266 offset = max_offset; 267 } 268 if(XFERP < min_xferp) { 269 XFERP = min_xferp; 270 } 271 return (offset & 0x0f) | (XFERP & 0x07)<<4; 272 } 273 274 static inline __u8 275 NCR_700_get_SXFER(struct scsi_device *SDp) 276 { 277 struct NCR_700_Host_Parameters *hostdata = 278 (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0]; 279 280 return NCR_700_offset_period_to_sxfer(hostdata, 281 spi_offset(SDp->sdev_target), 282 spi_period(SDp->sdev_target)); 283 } 284 285 struct Scsi_Host * 286 NCR_700_detect(struct scsi_host_template *tpnt, 287 struct NCR_700_Host_Parameters *hostdata, struct device *dev) 288 { 289 dma_addr_t pScript, pSlots; 290 __u8 *memory; 291 __u32 *script; 292 struct Scsi_Host *host; 293 static int banner = 0; 294 int j; 295 296 if(tpnt->sdev_attrs == NULL) 297 tpnt->sdev_attrs = NCR_700_dev_attrs; 298 299 memory = dma_alloc_noncoherent(hostdata->dev, TOTAL_MEM_SIZE, 300 &pScript, GFP_KERNEL); 301 if(memory == NULL) { 302 printk(KERN_ERR "53c700: Failed to allocate memory for driver, detaching\n"); 303 return NULL; 304 } 305 306 script = (__u32 *)memory; 307 hostdata->msgin = memory + MSGIN_OFFSET; 308 hostdata->msgout = memory + MSGOUT_OFFSET; 309 hostdata->status = memory + STATUS_OFFSET; 310 hostdata->slots = (struct NCR_700_command_slot *)(memory + SLOTS_OFFSET); 311 hostdata->dev = dev; 312 313 pSlots = pScript + SLOTS_OFFSET; 314 315 /* Fill in the missing routines from the host template */ 316 tpnt->queuecommand = NCR_700_queuecommand; 317 tpnt->eh_abort_handler = NCR_700_abort; 318 tpnt->eh_bus_reset_handler = NCR_700_bus_reset; 319 tpnt->eh_host_reset_handler = NCR_700_host_reset; 320 tpnt->can_queue = NCR_700_COMMAND_SLOTS_PER_HOST; 321 tpnt->sg_tablesize = NCR_700_SG_SEGMENTS; 322 tpnt->cmd_per_lun = NCR_700_CMD_PER_LUN; 323 tpnt->use_clustering = ENABLE_CLUSTERING; 324 tpnt->slave_configure = NCR_700_slave_configure; 325 tpnt->slave_destroy = NCR_700_slave_destroy; 326 tpnt->slave_alloc = NCR_700_slave_alloc; 327 tpnt->change_queue_depth = NCR_700_change_queue_depth; 328 tpnt->use_blk_tags = 1; 329 330 if(tpnt->name == NULL) 331 tpnt->name = "53c700"; 332 if(tpnt->proc_name == NULL) 333 tpnt->proc_name = "53c700"; 334 335 host = scsi_host_alloc(tpnt, 4); 336 if (!host) 337 return NULL; 338 memset(hostdata->slots, 0, sizeof(struct NCR_700_command_slot) 339 * NCR_700_COMMAND_SLOTS_PER_HOST); 340 for (j = 0; j < NCR_700_COMMAND_SLOTS_PER_HOST; j++) { 341 dma_addr_t offset = (dma_addr_t)((unsigned long)&hostdata->slots[j].SG[0] 342 - (unsigned long)&hostdata->slots[0].SG[0]); 343 hostdata->slots[j].pSG = (struct NCR_700_SG_List *)((unsigned long)(pSlots + offset)); 344 if(j == 0) 345 hostdata->free_list = &hostdata->slots[j]; 346 else 347 hostdata->slots[j-1].ITL_forw = &hostdata->slots[j]; 348 hostdata->slots[j].state = NCR_700_SLOT_FREE; 349 } 350 351 for (j = 0; j < ARRAY_SIZE(SCRIPT); j++) 352 script[j] = bS_to_host(SCRIPT[j]); 353 354 /* adjust all labels to be bus physical */ 355 for (j = 0; j < PATCHES; j++) 356 script[LABELPATCHES[j]] = bS_to_host(pScript + SCRIPT[LABELPATCHES[j]]); 357 /* now patch up fixed addresses. */ 358 script_patch_32(hostdata->dev, script, MessageLocation, 359 pScript + MSGOUT_OFFSET); 360 script_patch_32(hostdata->dev, script, StatusAddress, 361 pScript + STATUS_OFFSET); 362 script_patch_32(hostdata->dev, script, ReceiveMsgAddress, 363 pScript + MSGIN_OFFSET); 364 365 hostdata->script = script; 366 hostdata->pScript = pScript; 367 dma_sync_single_for_device(hostdata->dev, pScript, sizeof(SCRIPT), DMA_TO_DEVICE); 368 hostdata->state = NCR_700_HOST_FREE; 369 hostdata->cmd = NULL; 370 host->max_id = 8; 371 host->max_lun = NCR_700_MAX_LUNS; 372 BUG_ON(NCR_700_transport_template == NULL); 373 host->transportt = NCR_700_transport_template; 374 host->unique_id = (unsigned long)hostdata->base; 375 hostdata->eh_complete = NULL; 376 host->hostdata[0] = (unsigned long)hostdata; 377 /* kick the chip */ 378 NCR_700_writeb(0xff, host, CTEST9_REG); 379 if (hostdata->chip710) 380 hostdata->rev = (NCR_700_readb(host, CTEST8_REG)>>4) & 0x0f; 381 else 382 hostdata->rev = (NCR_700_readb(host, CTEST7_REG)>>4) & 0x0f; 383 hostdata->fast = (NCR_700_readb(host, CTEST9_REG) == 0); 384 if (banner == 0) { 385 printk(KERN_NOTICE "53c700: Version " NCR_700_VERSION " By James.Bottomley@HansenPartnership.com\n"); 386 banner = 1; 387 } 388 printk(KERN_NOTICE "scsi%d: %s rev %d %s\n", host->host_no, 389 hostdata->chip710 ? "53c710" : 390 (hostdata->fast ? "53c700-66" : "53c700"), 391 hostdata->rev, hostdata->differential ? 392 "(Differential)" : ""); 393 /* reset the chip */ 394 NCR_700_chip_reset(host); 395 396 if (scsi_add_host(host, dev)) { 397 dev_printk(KERN_ERR, dev, "53c700: scsi_add_host failed\n"); 398 scsi_host_put(host); 399 return NULL; 400 } 401 402 spi_signalling(host) = hostdata->differential ? SPI_SIGNAL_HVD : 403 SPI_SIGNAL_SE; 404 405 return host; 406 } 407 408 int 409 NCR_700_release(struct Scsi_Host *host) 410 { 411 struct NCR_700_Host_Parameters *hostdata = 412 (struct NCR_700_Host_Parameters *)host->hostdata[0]; 413 414 dma_free_noncoherent(hostdata->dev, TOTAL_MEM_SIZE, 415 hostdata->script, hostdata->pScript); 416 return 1; 417 } 418 419 static inline __u8 420 NCR_700_identify(int can_disconnect, __u8 lun) 421 { 422 return IDENTIFY_BASE | 423 ((can_disconnect) ? 0x40 : 0) | 424 (lun & NCR_700_LUN_MASK); 425 } 426 427 /* 428 * Function : static int data_residual (Scsi_Host *host) 429 * 430 * Purpose : return residual data count of what's in the chip. If you 431 * really want to know what this function is doing, it's almost a 432 * direct transcription of the algorithm described in the 53c710 433 * guide, except that the DBC and DFIFO registers are only 6 bits 434 * wide on a 53c700. 435 * 436 * Inputs : host - SCSI host */ 437 static inline int 438 NCR_700_data_residual (struct Scsi_Host *host) { 439 struct NCR_700_Host_Parameters *hostdata = 440 (struct NCR_700_Host_Parameters *)host->hostdata[0]; 441 int count, synchronous = 0; 442 unsigned int ddir; 443 444 if(hostdata->chip710) { 445 count = ((NCR_700_readb(host, DFIFO_REG) & 0x7f) - 446 (NCR_700_readl(host, DBC_REG) & 0x7f)) & 0x7f; 447 } else { 448 count = ((NCR_700_readb(host, DFIFO_REG) & 0x3f) - 449 (NCR_700_readl(host, DBC_REG) & 0x3f)) & 0x3f; 450 } 451 452 if(hostdata->fast) 453 synchronous = NCR_700_readb(host, SXFER_REG) & 0x0f; 454 455 /* get the data direction */ 456 ddir = NCR_700_readb(host, CTEST0_REG) & 0x01; 457 458 if (ddir) { 459 /* Receive */ 460 if (synchronous) 461 count += (NCR_700_readb(host, SSTAT2_REG) & 0xf0) >> 4; 462 else 463 if (NCR_700_readb(host, SSTAT1_REG) & SIDL_REG_FULL) 464 ++count; 465 } else { 466 /* Send */ 467 __u8 sstat = NCR_700_readb(host, SSTAT1_REG); 468 if (sstat & SODL_REG_FULL) 469 ++count; 470 if (synchronous && (sstat & SODR_REG_FULL)) 471 ++count; 472 } 473 #ifdef NCR_700_DEBUG 474 if(count) 475 printk("RESIDUAL IS %d (ddir %d)\n", count, ddir); 476 #endif 477 return count; 478 } 479 480 /* print out the SCSI wires and corresponding phase from the SBCL register 481 * in the chip */ 482 static inline char * 483 sbcl_to_string(__u8 sbcl) 484 { 485 int i; 486 static char ret[256]; 487 488 ret[0]='\0'; 489 for(i=0; i<8; i++) { 490 if((1<<i) & sbcl) 491 strcat(ret, NCR_700_SBCL_bits[i]); 492 } 493 strcat(ret, NCR_700_SBCL_to_phase[sbcl & 0x07]); 494 return ret; 495 } 496 497 static inline __u8 498 bitmap_to_number(__u8 bitmap) 499 { 500 __u8 i; 501 502 for(i=0; i<8 && !(bitmap &(1<<i)); i++) 503 ; 504 return i; 505 } 506 507 /* Pull a slot off the free list */ 508 STATIC struct NCR_700_command_slot * 509 find_empty_slot(struct NCR_700_Host_Parameters *hostdata) 510 { 511 struct NCR_700_command_slot *slot = hostdata->free_list; 512 513 if(slot == NULL) { 514 /* sanity check */ 515 if(hostdata->command_slot_count != NCR_700_COMMAND_SLOTS_PER_HOST) 516 printk(KERN_ERR "SLOTS FULL, but count is %d, should be %d\n", hostdata->command_slot_count, NCR_700_COMMAND_SLOTS_PER_HOST); 517 return NULL; 518 } 519 520 if(slot->state != NCR_700_SLOT_FREE) 521 /* should panic! */ 522 printk(KERN_ERR "BUSY SLOT ON FREE LIST!!!\n"); 523 524 525 hostdata->free_list = slot->ITL_forw; 526 slot->ITL_forw = NULL; 527 528 529 /* NOTE: set the state to busy here, not queued, since this 530 * indicates the slot is in use and cannot be run by the IRQ 531 * finish routine. If we cannot queue the command when it 532 * is properly build, we then change to NCR_700_SLOT_QUEUED */ 533 slot->state = NCR_700_SLOT_BUSY; 534 slot->flags = 0; 535 hostdata->command_slot_count++; 536 537 return slot; 538 } 539 540 STATIC void 541 free_slot(struct NCR_700_command_slot *slot, 542 struct NCR_700_Host_Parameters *hostdata) 543 { 544 if((slot->state & NCR_700_SLOT_MASK) != NCR_700_SLOT_MAGIC) { 545 printk(KERN_ERR "53c700: SLOT %p is not MAGIC!!!\n", slot); 546 } 547 if(slot->state == NCR_700_SLOT_FREE) { 548 printk(KERN_ERR "53c700: SLOT %p is FREE!!!\n", slot); 549 } 550 551 slot->resume_offset = 0; 552 slot->cmnd = NULL; 553 slot->state = NCR_700_SLOT_FREE; 554 slot->ITL_forw = hostdata->free_list; 555 hostdata->free_list = slot; 556 hostdata->command_slot_count--; 557 } 558 559 560 /* This routine really does very little. The command is indexed on 561 the ITL and (if tagged) the ITLQ lists in _queuecommand */ 562 STATIC void 563 save_for_reselection(struct NCR_700_Host_Parameters *hostdata, 564 struct scsi_cmnd *SCp, __u32 dsp) 565 { 566 /* Its just possible that this gets executed twice */ 567 if(SCp != NULL) { 568 struct NCR_700_command_slot *slot = 569 (struct NCR_700_command_slot *)SCp->host_scribble; 570 571 slot->resume_offset = dsp; 572 } 573 hostdata->state = NCR_700_HOST_FREE; 574 hostdata->cmd = NULL; 575 } 576 577 STATIC inline void 578 NCR_700_unmap(struct NCR_700_Host_Parameters *hostdata, struct scsi_cmnd *SCp, 579 struct NCR_700_command_slot *slot) 580 { 581 if(SCp->sc_data_direction != DMA_NONE && 582 SCp->sc_data_direction != DMA_BIDIRECTIONAL) 583 scsi_dma_unmap(SCp); 584 } 585 586 STATIC inline void 587 NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata, 588 struct scsi_cmnd *SCp, int result) 589 { 590 hostdata->state = NCR_700_HOST_FREE; 591 hostdata->cmd = NULL; 592 593 if(SCp != NULL) { 594 struct NCR_700_command_slot *slot = 595 (struct NCR_700_command_slot *)SCp->host_scribble; 596 597 dma_unmap_single(hostdata->dev, slot->pCmd, 598 MAX_COMMAND_SIZE, DMA_TO_DEVICE); 599 if (slot->flags == NCR_700_FLAG_AUTOSENSE) { 600 char *cmnd = NCR_700_get_sense_cmnd(SCp->device); 601 602 dma_unmap_single(hostdata->dev, slot->dma_handle, 603 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); 604 /* restore the old result if the request sense was 605 * successful */ 606 if (result == 0) 607 result = cmnd[7]; 608 /* restore the original length */ 609 SCp->cmd_len = cmnd[8]; 610 } else 611 NCR_700_unmap(hostdata, SCp, slot); 612 613 free_slot(slot, hostdata); 614 #ifdef NCR_700_DEBUG 615 if(NCR_700_get_depth(SCp->device) == 0 || 616 NCR_700_get_depth(SCp->device) > SCp->device->queue_depth) 617 printk(KERN_ERR "Invalid depth in NCR_700_scsi_done(): %d\n", 618 NCR_700_get_depth(SCp->device)); 619 #endif /* NCR_700_DEBUG */ 620 NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) - 1); 621 622 SCp->host_scribble = NULL; 623 SCp->result = result; 624 SCp->scsi_done(SCp); 625 } else { 626 printk(KERN_ERR "53c700: SCSI DONE HAS NULL SCp\n"); 627 } 628 } 629 630 631 STATIC void 632 NCR_700_internal_bus_reset(struct Scsi_Host *host) 633 { 634 /* Bus reset */ 635 NCR_700_writeb(ASSERT_RST, host, SCNTL1_REG); 636 udelay(50); 637 NCR_700_writeb(0, host, SCNTL1_REG); 638 639 } 640 641 STATIC void 642 NCR_700_chip_setup(struct Scsi_Host *host) 643 { 644 struct NCR_700_Host_Parameters *hostdata = 645 (struct NCR_700_Host_Parameters *)host->hostdata[0]; 646 __u8 min_period; 647 __u8 min_xferp = (hostdata->chip710 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP); 648 649 if(hostdata->chip710) { 650 __u8 burst_disable = 0; 651 __u8 burst_length = 0; 652 653 switch (hostdata->burst_length) { 654 case 1: 655 burst_length = BURST_LENGTH_1; 656 break; 657 case 2: 658 burst_length = BURST_LENGTH_2; 659 break; 660 case 4: 661 burst_length = BURST_LENGTH_4; 662 break; 663 case 8: 664 burst_length = BURST_LENGTH_8; 665 break; 666 default: 667 burst_disable = BURST_DISABLE; 668 break; 669 } 670 hostdata->dcntl_extra |= COMPAT_700_MODE; 671 672 NCR_700_writeb(hostdata->dcntl_extra, host, DCNTL_REG); 673 NCR_700_writeb(burst_length | hostdata->dmode_extra, 674 host, DMODE_710_REG); 675 NCR_700_writeb(burst_disable | hostdata->ctest7_extra | 676 (hostdata->differential ? DIFF : 0), 677 host, CTEST7_REG); 678 NCR_700_writeb(BTB_TIMER_DISABLE, host, CTEST0_REG); 679 NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY | PARITY 680 | AUTO_ATN, host, SCNTL0_REG); 681 } else { 682 NCR_700_writeb(BURST_LENGTH_8 | hostdata->dmode_extra, 683 host, DMODE_700_REG); 684 NCR_700_writeb(hostdata->differential ? 685 DIFF : 0, host, CTEST7_REG); 686 if(hostdata->fast) { 687 /* this is for 700-66, does nothing on 700 */ 688 NCR_700_writeb(LAST_DIS_ENBL | ENABLE_ACTIVE_NEGATION 689 | GENERATE_RECEIVE_PARITY, host, 690 CTEST8_REG); 691 } else { 692 NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY 693 | PARITY | AUTO_ATN, host, SCNTL0_REG); 694 } 695 } 696 697 NCR_700_writeb(1 << host->this_id, host, SCID_REG); 698 NCR_700_writeb(0, host, SBCL_REG); 699 NCR_700_writeb(ASYNC_OPERATION, host, SXFER_REG); 700 701 NCR_700_writeb(PHASE_MM_INT | SEL_TIMEOUT_INT | GROSS_ERR_INT | UX_DISC_INT 702 | RST_INT | PAR_ERR_INT | SELECT_INT, host, SIEN_REG); 703 704 NCR_700_writeb(ABORT_INT | INT_INST_INT | ILGL_INST_INT, host, DIEN_REG); 705 NCR_700_writeb(ENABLE_SELECT, host, SCNTL1_REG); 706 if(hostdata->clock > 75) { 707 printk(KERN_ERR "53c700: Clock speed %dMHz is too high: 75Mhz is the maximum this chip can be driven at\n", hostdata->clock); 708 /* do the best we can, but the async clock will be out 709 * of spec: sync divider 2, async divider 3 */ 710 DEBUG(("53c700: sync 2 async 3\n")); 711 NCR_700_writeb(SYNC_DIV_2_0, host, SBCL_REG); 712 NCR_700_writeb(ASYNC_DIV_3_0 | hostdata->dcntl_extra, host, DCNTL_REG); 713 hostdata->sync_clock = hostdata->clock/2; 714 } else if(hostdata->clock > 50 && hostdata->clock <= 75) { 715 /* sync divider 1.5, async divider 3 */ 716 DEBUG(("53c700: sync 1.5 async 3\n")); 717 NCR_700_writeb(SYNC_DIV_1_5, host, SBCL_REG); 718 NCR_700_writeb(ASYNC_DIV_3_0 | hostdata->dcntl_extra, host, DCNTL_REG); 719 hostdata->sync_clock = hostdata->clock*2; 720 hostdata->sync_clock /= 3; 721 722 } else if(hostdata->clock > 37 && hostdata->clock <= 50) { 723 /* sync divider 1, async divider 2 */ 724 DEBUG(("53c700: sync 1 async 2\n")); 725 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG); 726 NCR_700_writeb(ASYNC_DIV_2_0 | hostdata->dcntl_extra, host, DCNTL_REG); 727 hostdata->sync_clock = hostdata->clock; 728 } else if(hostdata->clock > 25 && hostdata->clock <=37) { 729 /* sync divider 1, async divider 1.5 */ 730 DEBUG(("53c700: sync 1 async 1.5\n")); 731 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG); 732 NCR_700_writeb(ASYNC_DIV_1_5 | hostdata->dcntl_extra, host, DCNTL_REG); 733 hostdata->sync_clock = hostdata->clock; 734 } else { 735 DEBUG(("53c700: sync 1 async 1\n")); 736 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG); 737 NCR_700_writeb(ASYNC_DIV_1_0 | hostdata->dcntl_extra, host, DCNTL_REG); 738 /* sync divider 1, async divider 1 */ 739 hostdata->sync_clock = hostdata->clock; 740 } 741 /* Calculate the actual minimum period that can be supported 742 * by our synchronous clock speed. See the 710 manual for 743 * exact details of this calculation which is based on a 744 * setting of the SXFER register */ 745 min_period = 1000*(4+min_xferp)/(4*hostdata->sync_clock); 746 hostdata->min_period = NCR_700_MIN_PERIOD; 747 if(min_period > NCR_700_MIN_PERIOD) 748 hostdata->min_period = min_period; 749 } 750 751 STATIC void 752 NCR_700_chip_reset(struct Scsi_Host *host) 753 { 754 struct NCR_700_Host_Parameters *hostdata = 755 (struct NCR_700_Host_Parameters *)host->hostdata[0]; 756 if(hostdata->chip710) { 757 NCR_700_writeb(SOFTWARE_RESET_710, host, ISTAT_REG); 758 udelay(100); 759 760 NCR_700_writeb(0, host, ISTAT_REG); 761 } else { 762 NCR_700_writeb(SOFTWARE_RESET, host, DCNTL_REG); 763 udelay(100); 764 765 NCR_700_writeb(0, host, DCNTL_REG); 766 } 767 768 mdelay(1000); 769 770 NCR_700_chip_setup(host); 771 } 772 773 /* The heart of the message processing engine is that the instruction 774 * immediately after the INT is the normal case (and so must be CLEAR 775 * ACK). If we want to do something else, we call that routine in 776 * scripts and set temp to be the normal case + 8 (skipping the CLEAR 777 * ACK) so that the routine returns correctly to resume its activity 778 * */ 779 STATIC __u32 780 process_extended_message(struct Scsi_Host *host, 781 struct NCR_700_Host_Parameters *hostdata, 782 struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps) 783 { 784 __u32 resume_offset = dsp, temp = dsp + 8; 785 __u8 pun = 0xff, lun = 0xff; 786 787 if(SCp != NULL) { 788 pun = SCp->device->id; 789 lun = SCp->device->lun; 790 } 791 792 switch(hostdata->msgin[2]) { 793 case A_SDTR_MSG: 794 if(SCp != NULL && NCR_700_is_flag_set(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION)) { 795 struct scsi_target *starget = SCp->device->sdev_target; 796 __u8 period = hostdata->msgin[3]; 797 __u8 offset = hostdata->msgin[4]; 798 799 if(offset == 0 || period == 0) { 800 offset = 0; 801 period = 0; 802 } 803 804 spi_offset(starget) = offset; 805 spi_period(starget) = period; 806 807 if(NCR_700_is_flag_set(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION)) { 808 spi_display_xfer_agreement(starget); 809 NCR_700_clear_flag(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION); 810 } 811 812 NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC); 813 NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION); 814 815 NCR_700_writeb(NCR_700_get_SXFER(SCp->device), 816 host, SXFER_REG); 817 818 } else { 819 /* SDTR message out of the blue, reject it */ 820 shost_printk(KERN_WARNING, host, 821 "Unexpected SDTR msg\n"); 822 hostdata->msgout[0] = A_REJECT_MSG; 823 dma_cache_sync(hostdata->dev, hostdata->msgout, 1, DMA_TO_DEVICE); 824 script_patch_16(hostdata->dev, hostdata->script, 825 MessageCount, 1); 826 /* SendMsgOut returns, so set up the return 827 * address */ 828 resume_offset = hostdata->pScript + Ent_SendMessageWithATN; 829 } 830 break; 831 832 case A_WDTR_MSG: 833 printk(KERN_INFO "scsi%d: (%d:%d), Unsolicited WDTR after CMD, Rejecting\n", 834 host->host_no, pun, lun); 835 hostdata->msgout[0] = A_REJECT_MSG; 836 dma_cache_sync(hostdata->dev, hostdata->msgout, 1, DMA_TO_DEVICE); 837 script_patch_16(hostdata->dev, hostdata->script, MessageCount, 838 1); 839 resume_offset = hostdata->pScript + Ent_SendMessageWithATN; 840 841 break; 842 843 default: 844 printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ", 845 host->host_no, pun, lun, 846 NCR_700_phase[(dsps & 0xf00) >> 8]); 847 spi_print_msg(hostdata->msgin); 848 printk("\n"); 849 /* just reject it */ 850 hostdata->msgout[0] = A_REJECT_MSG; 851 dma_cache_sync(hostdata->dev, hostdata->msgout, 1, DMA_TO_DEVICE); 852 script_patch_16(hostdata->dev, hostdata->script, MessageCount, 853 1); 854 /* SendMsgOut returns, so set up the return 855 * address */ 856 resume_offset = hostdata->pScript + Ent_SendMessageWithATN; 857 } 858 NCR_700_writel(temp, host, TEMP_REG); 859 return resume_offset; 860 } 861 862 STATIC __u32 863 process_message(struct Scsi_Host *host, struct NCR_700_Host_Parameters *hostdata, 864 struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps) 865 { 866 /* work out where to return to */ 867 __u32 temp = dsp + 8, resume_offset = dsp; 868 __u8 pun = 0xff, lun = 0xff; 869 870 if(SCp != NULL) { 871 pun = SCp->device->id; 872 lun = SCp->device->lun; 873 } 874 875 #ifdef NCR_700_DEBUG 876 printk("scsi%d (%d:%d): message %s: ", host->host_no, pun, lun, 877 NCR_700_phase[(dsps & 0xf00) >> 8]); 878 spi_print_msg(hostdata->msgin); 879 printk("\n"); 880 #endif 881 882 switch(hostdata->msgin[0]) { 883 884 case A_EXTENDED_MSG: 885 resume_offset = process_extended_message(host, hostdata, SCp, 886 dsp, dsps); 887 break; 888 889 case A_REJECT_MSG: 890 if(SCp != NULL && NCR_700_is_flag_set(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION)) { 891 /* Rejected our sync negotiation attempt */ 892 spi_period(SCp->device->sdev_target) = 893 spi_offset(SCp->device->sdev_target) = 0; 894 NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC); 895 NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION); 896 } else if(SCp != NULL && NCR_700_get_tag_neg_state(SCp->device) == NCR_700_DURING_TAG_NEGOTIATION) { 897 /* rejected our first simple tag message */ 898 scmd_printk(KERN_WARNING, SCp, 899 "Rejected first tag queue attempt, turning off tag queueing\n"); 900 /* we're done negotiating */ 901 NCR_700_set_tag_neg_state(SCp->device, NCR_700_FINISHED_TAG_NEGOTIATION); 902 hostdata->tag_negotiated &= ~(1<<scmd_id(SCp)); 903 904 SCp->device->tagged_supported = 0; 905 SCp->device->simple_tags = 0; 906 scsi_change_queue_depth(SCp->device, host->cmd_per_lun); 907 } else { 908 shost_printk(KERN_WARNING, host, 909 "(%d:%d) Unexpected REJECT Message %s\n", 910 pun, lun, 911 NCR_700_phase[(dsps & 0xf00) >> 8]); 912 /* however, just ignore it */ 913 } 914 break; 915 916 case A_PARITY_ERROR_MSG: 917 printk(KERN_ERR "scsi%d (%d:%d) Parity Error!\n", host->host_no, 918 pun, lun); 919 NCR_700_internal_bus_reset(host); 920 break; 921 case A_SIMPLE_TAG_MSG: 922 printk(KERN_INFO "scsi%d (%d:%d) SIMPLE TAG %d %s\n", host->host_no, 923 pun, lun, hostdata->msgin[1], 924 NCR_700_phase[(dsps & 0xf00) >> 8]); 925 /* just ignore it */ 926 break; 927 default: 928 printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ", 929 host->host_no, pun, lun, 930 NCR_700_phase[(dsps & 0xf00) >> 8]); 931 932 spi_print_msg(hostdata->msgin); 933 printk("\n"); 934 /* just reject it */ 935 hostdata->msgout[0] = A_REJECT_MSG; 936 dma_cache_sync(hostdata->dev, hostdata->msgout, 1, DMA_TO_DEVICE); 937 script_patch_16(hostdata->dev, hostdata->script, MessageCount, 938 1); 939 /* SendMsgOut returns, so set up the return 940 * address */ 941 resume_offset = hostdata->pScript + Ent_SendMessageWithATN; 942 943 break; 944 } 945 NCR_700_writel(temp, host, TEMP_REG); 946 /* set us up to receive another message */ 947 dma_cache_sync(hostdata->dev, hostdata->msgin, MSG_ARRAY_SIZE, DMA_FROM_DEVICE); 948 return resume_offset; 949 } 950 951 STATIC __u32 952 process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp, 953 struct Scsi_Host *host, 954 struct NCR_700_Host_Parameters *hostdata) 955 { 956 __u32 resume_offset = 0; 957 __u8 pun = 0xff, lun=0xff; 958 959 if(SCp != NULL) { 960 pun = SCp->device->id; 961 lun = SCp->device->lun; 962 } 963 964 if(dsps == A_GOOD_STATUS_AFTER_STATUS) { 965 DEBUG((" COMMAND COMPLETE, status=%02x\n", 966 hostdata->status[0])); 967 /* OK, if TCQ still under negotiation, we now know it works */ 968 if (NCR_700_get_tag_neg_state(SCp->device) == NCR_700_DURING_TAG_NEGOTIATION) 969 NCR_700_set_tag_neg_state(SCp->device, 970 NCR_700_FINISHED_TAG_NEGOTIATION); 971 972 /* check for contingent allegiance contitions */ 973 if(status_byte(hostdata->status[0]) == CHECK_CONDITION || 974 status_byte(hostdata->status[0]) == COMMAND_TERMINATED) { 975 struct NCR_700_command_slot *slot = 976 (struct NCR_700_command_slot *)SCp->host_scribble; 977 if(slot->flags == NCR_700_FLAG_AUTOSENSE) { 978 /* OOPS: bad device, returning another 979 * contingent allegiance condition */ 980 scmd_printk(KERN_ERR, SCp, 981 "broken device is looping in contingent allegiance: ignoring\n"); 982 NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]); 983 } else { 984 char *cmnd = 985 NCR_700_get_sense_cmnd(SCp->device); 986 #ifdef NCR_DEBUG 987 scsi_print_command(SCp); 988 printk(" cmd %p has status %d, requesting sense\n", 989 SCp, hostdata->status[0]); 990 #endif 991 /* we can destroy the command here 992 * because the contingent allegiance 993 * condition will cause a retry which 994 * will re-copy the command from the 995 * saved data_cmnd. We also unmap any 996 * data associated with the command 997 * here */ 998 NCR_700_unmap(hostdata, SCp, slot); 999 dma_unmap_single(hostdata->dev, slot->pCmd, 1000 MAX_COMMAND_SIZE, 1001 DMA_TO_DEVICE); 1002 1003 cmnd[0] = REQUEST_SENSE; 1004 cmnd[1] = (lun & 0x7) << 5; 1005 cmnd[2] = 0; 1006 cmnd[3] = 0; 1007 cmnd[4] = SCSI_SENSE_BUFFERSIZE; 1008 cmnd[5] = 0; 1009 /* Here's a quiet hack: the 1010 * REQUEST_SENSE command is six bytes, 1011 * so store a flag indicating that 1012 * this was an internal sense request 1013 * and the original status at the end 1014 * of the command */ 1015 cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC; 1016 cmnd[7] = hostdata->status[0]; 1017 cmnd[8] = SCp->cmd_len; 1018 SCp->cmd_len = 6; /* command length for 1019 * REQUEST_SENSE */ 1020 slot->pCmd = dma_map_single(hostdata->dev, cmnd, MAX_COMMAND_SIZE, DMA_TO_DEVICE); 1021 slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); 1022 slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | SCSI_SENSE_BUFFERSIZE); 1023 slot->SG[0].pAddr = bS_to_host(slot->dma_handle); 1024 slot->SG[1].ins = bS_to_host(SCRIPT_RETURN); 1025 slot->SG[1].pAddr = 0; 1026 slot->resume_offset = hostdata->pScript; 1027 dma_cache_sync(hostdata->dev, slot->SG, sizeof(slot->SG[0])*2, DMA_TO_DEVICE); 1028 dma_cache_sync(hostdata->dev, SCp->sense_buffer, SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); 1029 1030 /* queue the command for reissue */ 1031 slot->state = NCR_700_SLOT_QUEUED; 1032 slot->flags = NCR_700_FLAG_AUTOSENSE; 1033 hostdata->state = NCR_700_HOST_FREE; 1034 hostdata->cmd = NULL; 1035 } 1036 } else { 1037 // Currently rely on the mid layer evaluation 1038 // of the tag queuing capability 1039 // 1040 //if(status_byte(hostdata->status[0]) == GOOD && 1041 // SCp->cmnd[0] == INQUIRY && SCp->use_sg == 0) { 1042 // /* Piggy back the tag queueing support 1043 // * on this command */ 1044 // dma_sync_single_for_cpu(hostdata->dev, 1045 // slot->dma_handle, 1046 // SCp->request_bufflen, 1047 // DMA_FROM_DEVICE); 1048 // if(((char *)SCp->request_buffer)[7] & 0x02) { 1049 // scmd_printk(KERN_INFO, SCp, 1050 // "Enabling Tag Command Queuing\n"); 1051 // hostdata->tag_negotiated |= (1<<scmd_id(SCp)); 1052 // NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_TAG_QUEUEING); 1053 // } else { 1054 // NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_TAG_QUEUEING); 1055 // hostdata->tag_negotiated &= ~(1<<scmd_id(SCp)); 1056 // } 1057 //} 1058 NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]); 1059 } 1060 } else if((dsps & 0xfffff0f0) == A_UNEXPECTED_PHASE) { 1061 __u8 i = (dsps & 0xf00) >> 8; 1062 1063 scmd_printk(KERN_ERR, SCp, "UNEXPECTED PHASE %s (%s)\n", 1064 NCR_700_phase[i], 1065 sbcl_to_string(NCR_700_readb(host, SBCL_REG))); 1066 scmd_printk(KERN_ERR, SCp, " len = %d, cmd =", 1067 SCp->cmd_len); 1068 scsi_print_command(SCp); 1069 1070 NCR_700_internal_bus_reset(host); 1071 } else if((dsps & 0xfffff000) == A_FATAL) { 1072 int i = (dsps & 0xfff); 1073 1074 printk(KERN_ERR "scsi%d: (%d:%d) FATAL ERROR: %s\n", 1075 host->host_no, pun, lun, NCR_700_fatal_messages[i]); 1076 if(dsps == A_FATAL_ILLEGAL_MSG_LENGTH) { 1077 printk(KERN_ERR " msg begins %02x %02x\n", 1078 hostdata->msgin[0], hostdata->msgin[1]); 1079 } 1080 NCR_700_internal_bus_reset(host); 1081 } else if((dsps & 0xfffff0f0) == A_DISCONNECT) { 1082 #ifdef NCR_700_DEBUG 1083 __u8 i = (dsps & 0xf00) >> 8; 1084 1085 printk("scsi%d: (%d:%d), DISCONNECTED (%d) %s\n", 1086 host->host_no, pun, lun, 1087 i, NCR_700_phase[i]); 1088 #endif 1089 save_for_reselection(hostdata, SCp, dsp); 1090 1091 } else if(dsps == A_RESELECTION_IDENTIFIED) { 1092 __u8 lun; 1093 struct NCR_700_command_slot *slot; 1094 __u8 reselection_id = hostdata->reselection_id; 1095 struct scsi_device *SDp; 1096 1097 lun = hostdata->msgin[0] & 0x1f; 1098 1099 hostdata->reselection_id = 0xff; 1100 DEBUG(("scsi%d: (%d:%d) RESELECTED!\n", 1101 host->host_no, reselection_id, lun)); 1102 /* clear the reselection indicator */ 1103 SDp = __scsi_device_lookup(host, 0, reselection_id, lun); 1104 if(unlikely(SDp == NULL)) { 1105 printk(KERN_ERR "scsi%d: (%d:%d) HAS NO device\n", 1106 host->host_no, reselection_id, lun); 1107 BUG(); 1108 } 1109 if(hostdata->msgin[1] == A_SIMPLE_TAG_MSG) { 1110 struct scsi_cmnd *SCp = scsi_find_tag(SDp, hostdata->msgin[2]); 1111 if(unlikely(SCp == NULL)) { 1112 printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n", 1113 host->host_no, reselection_id, lun, hostdata->msgin[2]); 1114 BUG(); 1115 } 1116 1117 slot = (struct NCR_700_command_slot *)SCp->host_scribble; 1118 DDEBUG(KERN_DEBUG, SDp, 1119 "reselection is tag %d, slot %p(%d)\n", 1120 hostdata->msgin[2], slot, slot->tag); 1121 } else { 1122 struct scsi_cmnd *SCp = scsi_find_tag(SDp, SCSI_NO_TAG); 1123 if(unlikely(SCp == NULL)) { 1124 sdev_printk(KERN_ERR, SDp, 1125 "no saved request for untagged cmd\n"); 1126 BUG(); 1127 } 1128 slot = (struct NCR_700_command_slot *)SCp->host_scribble; 1129 } 1130 1131 if(slot == NULL) { 1132 printk(KERN_ERR "scsi%d: (%d:%d) RESELECTED but no saved command (MSG = %02x %02x %02x)!!\n", 1133 host->host_no, reselection_id, lun, 1134 hostdata->msgin[0], hostdata->msgin[1], 1135 hostdata->msgin[2]); 1136 } else { 1137 if(hostdata->state != NCR_700_HOST_BUSY) 1138 printk(KERN_ERR "scsi%d: FATAL, host not busy during valid reselection!\n", 1139 host->host_no); 1140 resume_offset = slot->resume_offset; 1141 hostdata->cmd = slot->cmnd; 1142 1143 /* re-patch for this command */ 1144 script_patch_32_abs(hostdata->dev, hostdata->script, 1145 CommandAddress, slot->pCmd); 1146 script_patch_16(hostdata->dev, hostdata->script, 1147 CommandCount, slot->cmnd->cmd_len); 1148 script_patch_32_abs(hostdata->dev, hostdata->script, 1149 SGScriptStartAddress, 1150 to32bit(&slot->pSG[0].ins)); 1151 1152 /* Note: setting SXFER only works if we're 1153 * still in the MESSAGE phase, so it is vital 1154 * that ACK is still asserted when we process 1155 * the reselection message. The resume offset 1156 * should therefore always clear ACK */ 1157 NCR_700_writeb(NCR_700_get_SXFER(hostdata->cmd->device), 1158 host, SXFER_REG); 1159 dma_cache_sync(hostdata->dev, hostdata->msgin, 1160 MSG_ARRAY_SIZE, DMA_FROM_DEVICE); 1161 dma_cache_sync(hostdata->dev, hostdata->msgout, 1162 MSG_ARRAY_SIZE, DMA_TO_DEVICE); 1163 /* I'm just being paranoid here, the command should 1164 * already have been flushed from the cache */ 1165 dma_cache_sync(hostdata->dev, slot->cmnd->cmnd, 1166 slot->cmnd->cmd_len, DMA_TO_DEVICE); 1167 1168 1169 1170 } 1171 } else if(dsps == A_RESELECTED_DURING_SELECTION) { 1172 1173 /* This section is full of debugging code because I've 1174 * never managed to reach it. I think what happens is 1175 * that, because the 700 runs with selection 1176 * interrupts enabled the whole time that we take a 1177 * selection interrupt before we manage to get to the 1178 * reselected script interrupt */ 1179 1180 __u8 reselection_id = NCR_700_readb(host, SFBR_REG); 1181 struct NCR_700_command_slot *slot; 1182 1183 /* Take out our own ID */ 1184 reselection_id &= ~(1<<host->this_id); 1185 1186 /* I've never seen this happen, so keep this as a printk rather 1187 * than a debug */ 1188 printk(KERN_INFO "scsi%d: (%d:%d) RESELECTION DURING SELECTION, dsp=%08x[%04x] state=%d, count=%d\n", 1189 host->host_no, reselection_id, lun, dsp, dsp - hostdata->pScript, hostdata->state, hostdata->command_slot_count); 1190 1191 { 1192 /* FIXME: DEBUGGING CODE */ 1193 __u32 SG = (__u32)bS_to_cpu(hostdata->script[A_SGScriptStartAddress_used[0]]); 1194 int i; 1195 1196 for(i=0; i< NCR_700_COMMAND_SLOTS_PER_HOST; i++) { 1197 if(SG >= to32bit(&hostdata->slots[i].pSG[0]) 1198 && SG <= to32bit(&hostdata->slots[i].pSG[NCR_700_SG_SEGMENTS])) 1199 break; 1200 } 1201 printk(KERN_INFO "IDENTIFIED SG segment as being %08x in slot %p, cmd %p, slot->resume_offset=%08x\n", SG, &hostdata->slots[i], hostdata->slots[i].cmnd, hostdata->slots[i].resume_offset); 1202 SCp = hostdata->slots[i].cmnd; 1203 } 1204 1205 if(SCp != NULL) { 1206 slot = (struct NCR_700_command_slot *)SCp->host_scribble; 1207 /* change slot from busy to queued to redo command */ 1208 slot->state = NCR_700_SLOT_QUEUED; 1209 } 1210 hostdata->cmd = NULL; 1211 1212 if(reselection_id == 0) { 1213 if(hostdata->reselection_id == 0xff) { 1214 printk(KERN_ERR "scsi%d: Invalid reselection during selection!!\n", host->host_no); 1215 return 0; 1216 } else { 1217 printk(KERN_ERR "scsi%d: script reselected and we took a selection interrupt\n", 1218 host->host_no); 1219 reselection_id = hostdata->reselection_id; 1220 } 1221 } else { 1222 1223 /* convert to real ID */ 1224 reselection_id = bitmap_to_number(reselection_id); 1225 } 1226 hostdata->reselection_id = reselection_id; 1227 /* just in case we have a stale simple tag message, clear it */ 1228 hostdata->msgin[1] = 0; 1229 dma_cache_sync(hostdata->dev, hostdata->msgin, 1230 MSG_ARRAY_SIZE, DMA_BIDIRECTIONAL); 1231 if(hostdata->tag_negotiated & (1<<reselection_id)) { 1232 resume_offset = hostdata->pScript + Ent_GetReselectionWithTag; 1233 } else { 1234 resume_offset = hostdata->pScript + Ent_GetReselectionData; 1235 } 1236 } else if(dsps == A_COMPLETED_SELECTION_AS_TARGET) { 1237 /* we've just disconnected from the bus, do nothing since 1238 * a return here will re-run the queued command slot 1239 * that may have been interrupted by the initial selection */ 1240 DEBUG((" SELECTION COMPLETED\n")); 1241 } else if((dsps & 0xfffff0f0) == A_MSG_IN) { 1242 resume_offset = process_message(host, hostdata, SCp, 1243 dsp, dsps); 1244 } else if((dsps & 0xfffff000) == 0) { 1245 __u8 i = (dsps & 0xf0) >> 4, j = (dsps & 0xf00) >> 8; 1246 printk(KERN_ERR "scsi%d: (%d:%d), unhandled script condition %s %s at %04x\n", 1247 host->host_no, pun, lun, NCR_700_condition[i], 1248 NCR_700_phase[j], dsp - hostdata->pScript); 1249 if(SCp != NULL) { 1250 struct scatterlist *sg; 1251 1252 scsi_print_command(SCp); 1253 scsi_for_each_sg(SCp, sg, scsi_sg_count(SCp) + 1, i) { 1254 printk(KERN_INFO " SG[%d].length = %d, move_insn=%08x, addr %08x\n", i, sg->length, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].ins, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].pAddr); 1255 } 1256 } 1257 NCR_700_internal_bus_reset(host); 1258 } else if((dsps & 0xfffff000) == A_DEBUG_INTERRUPT) { 1259 printk(KERN_NOTICE "scsi%d (%d:%d) DEBUG INTERRUPT %d AT %08x[%04x], continuing\n", 1260 host->host_no, pun, lun, dsps & 0xfff, dsp, dsp - hostdata->pScript); 1261 resume_offset = dsp; 1262 } else { 1263 printk(KERN_ERR "scsi%d: (%d:%d), unidentified script interrupt 0x%x at %04x\n", 1264 host->host_no, pun, lun, dsps, dsp - hostdata->pScript); 1265 NCR_700_internal_bus_reset(host); 1266 } 1267 return resume_offset; 1268 } 1269 1270 /* We run the 53c700 with selection interrupts always enabled. This 1271 * means that the chip may be selected as soon as the bus frees. On a 1272 * busy bus, this can be before the scripts engine finishes its 1273 * processing. Therefore, part of the selection processing has to be 1274 * to find out what the scripts engine is doing and complete the 1275 * function if necessary (i.e. process the pending disconnect or save 1276 * the interrupted initial selection */ 1277 STATIC inline __u32 1278 process_selection(struct Scsi_Host *host, __u32 dsp) 1279 { 1280 __u8 id = 0; /* Squash compiler warning */ 1281 int count = 0; 1282 __u32 resume_offset = 0; 1283 struct NCR_700_Host_Parameters *hostdata = 1284 (struct NCR_700_Host_Parameters *)host->hostdata[0]; 1285 struct scsi_cmnd *SCp = hostdata->cmd; 1286 __u8 sbcl; 1287 1288 for(count = 0; count < 5; count++) { 1289 id = NCR_700_readb(host, hostdata->chip710 ? 1290 CTEST9_REG : SFBR_REG); 1291 1292 /* Take out our own ID */ 1293 id &= ~(1<<host->this_id); 1294 if(id != 0) 1295 break; 1296 udelay(5); 1297 } 1298 sbcl = NCR_700_readb(host, SBCL_REG); 1299 if((sbcl & SBCL_IO) == 0) { 1300 /* mark as having been selected rather than reselected */ 1301 id = 0xff; 1302 } else { 1303 /* convert to real ID */ 1304 hostdata->reselection_id = id = bitmap_to_number(id); 1305 DEBUG(("scsi%d: Reselected by %d\n", 1306 host->host_no, id)); 1307 } 1308 if(hostdata->state == NCR_700_HOST_BUSY && SCp != NULL) { 1309 struct NCR_700_command_slot *slot = 1310 (struct NCR_700_command_slot *)SCp->host_scribble; 1311 DEBUG((" ID %d WARNING: RESELECTION OF BUSY HOST, saving cmd %p, slot %p, addr %x [%04x], resume %x!\n", id, hostdata->cmd, slot, dsp, dsp - hostdata->pScript, resume_offset)); 1312 1313 switch(dsp - hostdata->pScript) { 1314 case Ent_Disconnect1: 1315 case Ent_Disconnect2: 1316 save_for_reselection(hostdata, SCp, Ent_Disconnect2 + hostdata->pScript); 1317 break; 1318 case Ent_Disconnect3: 1319 case Ent_Disconnect4: 1320 save_for_reselection(hostdata, SCp, Ent_Disconnect4 + hostdata->pScript); 1321 break; 1322 case Ent_Disconnect5: 1323 case Ent_Disconnect6: 1324 save_for_reselection(hostdata, SCp, Ent_Disconnect6 + hostdata->pScript); 1325 break; 1326 case Ent_Disconnect7: 1327 case Ent_Disconnect8: 1328 save_for_reselection(hostdata, SCp, Ent_Disconnect8 + hostdata->pScript); 1329 break; 1330 case Ent_Finish1: 1331 case Ent_Finish2: 1332 process_script_interrupt(A_GOOD_STATUS_AFTER_STATUS, dsp, SCp, host, hostdata); 1333 break; 1334 1335 default: 1336 slot->state = NCR_700_SLOT_QUEUED; 1337 break; 1338 } 1339 } 1340 hostdata->state = NCR_700_HOST_BUSY; 1341 hostdata->cmd = NULL; 1342 /* clear any stale simple tag message */ 1343 hostdata->msgin[1] = 0; 1344 dma_cache_sync(hostdata->dev, hostdata->msgin, MSG_ARRAY_SIZE, 1345 DMA_BIDIRECTIONAL); 1346 1347 if(id == 0xff) { 1348 /* Selected as target, Ignore */ 1349 resume_offset = hostdata->pScript + Ent_SelectedAsTarget; 1350 } else if(hostdata->tag_negotiated & (1<<id)) { 1351 resume_offset = hostdata->pScript + Ent_GetReselectionWithTag; 1352 } else { 1353 resume_offset = hostdata->pScript + Ent_GetReselectionData; 1354 } 1355 return resume_offset; 1356 } 1357 1358 static inline void 1359 NCR_700_clear_fifo(struct Scsi_Host *host) { 1360 const struct NCR_700_Host_Parameters *hostdata 1361 = (struct NCR_700_Host_Parameters *)host->hostdata[0]; 1362 if(hostdata->chip710) { 1363 NCR_700_writeb(CLR_FIFO_710, host, CTEST8_REG); 1364 } else { 1365 NCR_700_writeb(CLR_FIFO, host, DFIFO_REG); 1366 } 1367 } 1368 1369 static inline void 1370 NCR_700_flush_fifo(struct Scsi_Host *host) { 1371 const struct NCR_700_Host_Parameters *hostdata 1372 = (struct NCR_700_Host_Parameters *)host->hostdata[0]; 1373 if(hostdata->chip710) { 1374 NCR_700_writeb(FLUSH_DMA_FIFO_710, host, CTEST8_REG); 1375 udelay(10); 1376 NCR_700_writeb(0, host, CTEST8_REG); 1377 } else { 1378 NCR_700_writeb(FLUSH_DMA_FIFO, host, DFIFO_REG); 1379 udelay(10); 1380 NCR_700_writeb(0, host, DFIFO_REG); 1381 } 1382 } 1383 1384 1385 /* The queue lock with interrupts disabled must be held on entry to 1386 * this function */ 1387 STATIC int 1388 NCR_700_start_command(struct scsi_cmnd *SCp) 1389 { 1390 struct NCR_700_command_slot *slot = 1391 (struct NCR_700_command_slot *)SCp->host_scribble; 1392 struct NCR_700_Host_Parameters *hostdata = 1393 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0]; 1394 __u16 count = 1; /* for IDENTIFY message */ 1395 u8 lun = SCp->device->lun; 1396 1397 if(hostdata->state != NCR_700_HOST_FREE) { 1398 /* keep this inside the lock to close the race window where 1399 * the running command finishes on another CPU while we don't 1400 * change the state to queued on this one */ 1401 slot->state = NCR_700_SLOT_QUEUED; 1402 1403 DEBUG(("scsi%d: host busy, queueing command %p, slot %p\n", 1404 SCp->device->host->host_no, slot->cmnd, slot)); 1405 return 0; 1406 } 1407 hostdata->state = NCR_700_HOST_BUSY; 1408 hostdata->cmd = SCp; 1409 slot->state = NCR_700_SLOT_BUSY; 1410 /* keep interrupts disabled until we have the command correctly 1411 * set up so we cannot take a selection interrupt */ 1412 1413 hostdata->msgout[0] = NCR_700_identify((SCp->cmnd[0] != REQUEST_SENSE && 1414 slot->flags != NCR_700_FLAG_AUTOSENSE), 1415 lun); 1416 /* for INQUIRY or REQUEST_SENSE commands, we cannot be sure 1417 * if the negotiated transfer parameters still hold, so 1418 * always renegotiate them */ 1419 if(SCp->cmnd[0] == INQUIRY || SCp->cmnd[0] == REQUEST_SENSE || 1420 slot->flags == NCR_700_FLAG_AUTOSENSE) { 1421 NCR_700_clear_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC); 1422 } 1423 1424 /* REQUEST_SENSE is asking for contingent I_T_L(_Q) status. 1425 * If a contingent allegiance condition exists, the device 1426 * will refuse all tags, so send the request sense as untagged 1427 * */ 1428 if((hostdata->tag_negotiated & (1<<scmd_id(SCp))) 1429 && (slot->tag != SCSI_NO_TAG && SCp->cmnd[0] != REQUEST_SENSE && 1430 slot->flags != NCR_700_FLAG_AUTOSENSE)) { 1431 count += spi_populate_tag_msg(&hostdata->msgout[count], SCp); 1432 } 1433 1434 if(hostdata->fast && 1435 NCR_700_is_flag_clear(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC)) { 1436 count += spi_populate_sync_msg(&hostdata->msgout[count], 1437 spi_period(SCp->device->sdev_target), 1438 spi_offset(SCp->device->sdev_target)); 1439 NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION); 1440 } 1441 1442 script_patch_16(hostdata->dev, hostdata->script, MessageCount, count); 1443 1444 1445 script_patch_ID(hostdata->dev, hostdata->script, 1446 Device_ID, 1<<scmd_id(SCp)); 1447 1448 script_patch_32_abs(hostdata->dev, hostdata->script, CommandAddress, 1449 slot->pCmd); 1450 script_patch_16(hostdata->dev, hostdata->script, CommandCount, 1451 SCp->cmd_len); 1452 /* finally plumb the beginning of the SG list into the script 1453 * */ 1454 script_patch_32_abs(hostdata->dev, hostdata->script, 1455 SGScriptStartAddress, to32bit(&slot->pSG[0].ins)); 1456 NCR_700_clear_fifo(SCp->device->host); 1457 1458 if(slot->resume_offset == 0) 1459 slot->resume_offset = hostdata->pScript; 1460 /* now perform all the writebacks and invalidates */ 1461 dma_cache_sync(hostdata->dev, hostdata->msgout, count, DMA_TO_DEVICE); 1462 dma_cache_sync(hostdata->dev, hostdata->msgin, MSG_ARRAY_SIZE, 1463 DMA_FROM_DEVICE); 1464 dma_cache_sync(hostdata->dev, SCp->cmnd, SCp->cmd_len, DMA_TO_DEVICE); 1465 dma_cache_sync(hostdata->dev, hostdata->status, 1, DMA_FROM_DEVICE); 1466 1467 /* set the synchronous period/offset */ 1468 NCR_700_writeb(NCR_700_get_SXFER(SCp->device), 1469 SCp->device->host, SXFER_REG); 1470 NCR_700_writel(slot->temp, SCp->device->host, TEMP_REG); 1471 NCR_700_writel(slot->resume_offset, SCp->device->host, DSP_REG); 1472 1473 return 1; 1474 } 1475 1476 irqreturn_t 1477 NCR_700_intr(int irq, void *dev_id) 1478 { 1479 struct Scsi_Host *host = (struct Scsi_Host *)dev_id; 1480 struct NCR_700_Host_Parameters *hostdata = 1481 (struct NCR_700_Host_Parameters *)host->hostdata[0]; 1482 __u8 istat; 1483 __u32 resume_offset = 0; 1484 __u8 pun = 0xff, lun = 0xff; 1485 unsigned long flags; 1486 int handled = 0; 1487 1488 /* Use the host lock to serialise access to the 53c700 1489 * hardware. Note: In future, we may need to take the queue 1490 * lock to enter the done routines. When that happens, we 1491 * need to ensure that for this driver, the host lock and the 1492 * queue lock point to the same thing. */ 1493 spin_lock_irqsave(host->host_lock, flags); 1494 if((istat = NCR_700_readb(host, ISTAT_REG)) 1495 & (SCSI_INT_PENDING | DMA_INT_PENDING)) { 1496 __u32 dsps; 1497 __u8 sstat0 = 0, dstat = 0; 1498 __u32 dsp; 1499 struct scsi_cmnd *SCp = hostdata->cmd; 1500 enum NCR_700_Host_State state; 1501 1502 handled = 1; 1503 state = hostdata->state; 1504 SCp = hostdata->cmd; 1505 1506 if(istat & SCSI_INT_PENDING) { 1507 udelay(10); 1508 1509 sstat0 = NCR_700_readb(host, SSTAT0_REG); 1510 } 1511 1512 if(istat & DMA_INT_PENDING) { 1513 udelay(10); 1514 1515 dstat = NCR_700_readb(host, DSTAT_REG); 1516 } 1517 1518 dsps = NCR_700_readl(host, DSPS_REG); 1519 dsp = NCR_700_readl(host, DSP_REG); 1520 1521 DEBUG(("scsi%d: istat %02x sstat0 %02x dstat %02x dsp %04x[%08x] dsps 0x%x\n", 1522 host->host_no, istat, sstat0, dstat, 1523 (dsp - (__u32)(hostdata->pScript))/4, 1524 dsp, dsps)); 1525 1526 if(SCp != NULL) { 1527 pun = SCp->device->id; 1528 lun = SCp->device->lun; 1529 } 1530 1531 if(sstat0 & SCSI_RESET_DETECTED) { 1532 struct scsi_device *SDp; 1533 int i; 1534 1535 hostdata->state = NCR_700_HOST_BUSY; 1536 1537 printk(KERN_ERR "scsi%d: Bus Reset detected, executing command %p, slot %p, dsp %08x[%04x]\n", 1538 host->host_no, SCp, SCp == NULL ? NULL : SCp->host_scribble, dsp, dsp - hostdata->pScript); 1539 1540 scsi_report_bus_reset(host, 0); 1541 1542 /* clear all the negotiated parameters */ 1543 __shost_for_each_device(SDp, host) 1544 NCR_700_clear_flag(SDp, ~0); 1545 1546 /* clear all the slots and their pending commands */ 1547 for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) { 1548 struct scsi_cmnd *SCp; 1549 struct NCR_700_command_slot *slot = 1550 &hostdata->slots[i]; 1551 1552 if(slot->state == NCR_700_SLOT_FREE) 1553 continue; 1554 1555 SCp = slot->cmnd; 1556 printk(KERN_ERR " failing command because of reset, slot %p, cmnd %p\n", 1557 slot, SCp); 1558 free_slot(slot, hostdata); 1559 SCp->host_scribble = NULL; 1560 NCR_700_set_depth(SCp->device, 0); 1561 /* NOTE: deadlock potential here: we 1562 * rely on mid-layer guarantees that 1563 * scsi_done won't try to issue the 1564 * command again otherwise we'll 1565 * deadlock on the 1566 * hostdata->state_lock */ 1567 SCp->result = DID_RESET << 16; 1568 SCp->scsi_done(SCp); 1569 } 1570 mdelay(25); 1571 NCR_700_chip_setup(host); 1572 1573 hostdata->state = NCR_700_HOST_FREE; 1574 hostdata->cmd = NULL; 1575 /* signal back if this was an eh induced reset */ 1576 if(hostdata->eh_complete != NULL) 1577 complete(hostdata->eh_complete); 1578 goto out_unlock; 1579 } else if(sstat0 & SELECTION_TIMEOUT) { 1580 DEBUG(("scsi%d: (%d:%d) selection timeout\n", 1581 host->host_no, pun, lun)); 1582 NCR_700_scsi_done(hostdata, SCp, DID_NO_CONNECT<<16); 1583 } else if(sstat0 & PHASE_MISMATCH) { 1584 struct NCR_700_command_slot *slot = (SCp == NULL) ? NULL : 1585 (struct NCR_700_command_slot *)SCp->host_scribble; 1586 1587 if(dsp == Ent_SendMessage + 8 + hostdata->pScript) { 1588 /* It wants to reply to some part of 1589 * our message */ 1590 #ifdef NCR_700_DEBUG 1591 __u32 temp = NCR_700_readl(host, TEMP_REG); 1592 int count = (hostdata->script[Ent_SendMessage/4] & 0xffffff) - ((NCR_700_readl(host, DBC_REG) & 0xffffff) + NCR_700_data_residual(host)); 1593 printk("scsi%d (%d:%d) PHASE MISMATCH IN SEND MESSAGE %d remain, return %p[%04x], phase %s\n", host->host_no, pun, lun, count, (void *)temp, temp - hostdata->pScript, sbcl_to_string(NCR_700_readb(host, SBCL_REG))); 1594 #endif 1595 resume_offset = hostdata->pScript + Ent_SendMessagePhaseMismatch; 1596 } else if(dsp >= to32bit(&slot->pSG[0].ins) && 1597 dsp <= to32bit(&slot->pSG[NCR_700_SG_SEGMENTS].ins)) { 1598 int data_transfer = NCR_700_readl(host, DBC_REG) & 0xffffff; 1599 int SGcount = (dsp - to32bit(&slot->pSG[0].ins))/sizeof(struct NCR_700_SG_List); 1600 int residual = NCR_700_data_residual(host); 1601 int i; 1602 #ifdef NCR_700_DEBUG 1603 __u32 naddr = NCR_700_readl(host, DNAD_REG); 1604 1605 printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x\n", 1606 host->host_no, pun, lun, 1607 SGcount, data_transfer); 1608 scsi_print_command(SCp); 1609 if(residual) { 1610 printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x, residual %d\n", 1611 host->host_no, pun, lun, 1612 SGcount, data_transfer, residual); 1613 } 1614 #endif 1615 data_transfer += residual; 1616 1617 if(data_transfer != 0) { 1618 int count; 1619 __u32 pAddr; 1620 1621 SGcount--; 1622 1623 count = (bS_to_cpu(slot->SG[SGcount].ins) & 0x00ffffff); 1624 DEBUG(("DATA TRANSFER MISMATCH, count = %d, transferred %d\n", count, count-data_transfer)); 1625 slot->SG[SGcount].ins &= bS_to_host(0xff000000); 1626 slot->SG[SGcount].ins |= bS_to_host(data_transfer); 1627 pAddr = bS_to_cpu(slot->SG[SGcount].pAddr); 1628 pAddr += (count - data_transfer); 1629 #ifdef NCR_700_DEBUG 1630 if(pAddr != naddr) { 1631 printk("scsi%d (%d:%d) transfer mismatch pAddr=%lx, naddr=%lx, data_transfer=%d, residual=%d\n", host->host_no, pun, lun, (unsigned long)pAddr, (unsigned long)naddr, data_transfer, residual); 1632 } 1633 #endif 1634 slot->SG[SGcount].pAddr = bS_to_host(pAddr); 1635 } 1636 /* set the executed moves to nops */ 1637 for(i=0; i<SGcount; i++) { 1638 slot->SG[i].ins = bS_to_host(SCRIPT_NOP); 1639 slot->SG[i].pAddr = 0; 1640 } 1641 dma_cache_sync(hostdata->dev, slot->SG, sizeof(slot->SG), DMA_TO_DEVICE); 1642 /* and pretend we disconnected after 1643 * the command phase */ 1644 resume_offset = hostdata->pScript + Ent_MsgInDuringData; 1645 /* make sure all the data is flushed */ 1646 NCR_700_flush_fifo(host); 1647 } else { 1648 __u8 sbcl = NCR_700_readb(host, SBCL_REG); 1649 printk(KERN_ERR "scsi%d: (%d:%d) phase mismatch at %04x, phase %s\n", 1650 host->host_no, pun, lun, dsp - hostdata->pScript, sbcl_to_string(sbcl)); 1651 NCR_700_internal_bus_reset(host); 1652 } 1653 1654 } else if(sstat0 & SCSI_GROSS_ERROR) { 1655 printk(KERN_ERR "scsi%d: (%d:%d) GROSS ERROR\n", 1656 host->host_no, pun, lun); 1657 NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16); 1658 } else if(sstat0 & PARITY_ERROR) { 1659 printk(KERN_ERR "scsi%d: (%d:%d) PARITY ERROR\n", 1660 host->host_no, pun, lun); 1661 NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16); 1662 } else if(dstat & SCRIPT_INT_RECEIVED) { 1663 DEBUG(("scsi%d: (%d:%d) ====>SCRIPT INTERRUPT<====\n", 1664 host->host_no, pun, lun)); 1665 resume_offset = process_script_interrupt(dsps, dsp, SCp, host, hostdata); 1666 } else if(dstat & (ILGL_INST_DETECTED)) { 1667 printk(KERN_ERR "scsi%d: (%d:%d) Illegal Instruction detected at 0x%08x[0x%x]!!!\n" 1668 " Please email James.Bottomley@HansenPartnership.com with the details\n", 1669 host->host_no, pun, lun, 1670 dsp, dsp - hostdata->pScript); 1671 NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16); 1672 } else if(dstat & (WATCH_DOG_INTERRUPT|ABORTED)) { 1673 printk(KERN_ERR "scsi%d: (%d:%d) serious DMA problem, dstat=%02x\n", 1674 host->host_no, pun, lun, dstat); 1675 NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16); 1676 } 1677 1678 1679 /* NOTE: selection interrupt processing MUST occur 1680 * after script interrupt processing to correctly cope 1681 * with the case where we process a disconnect and 1682 * then get reselected before we process the 1683 * disconnection */ 1684 if(sstat0 & SELECTED) { 1685 /* FIXME: It currently takes at least FOUR 1686 * interrupts to complete a command that 1687 * disconnects: one for the disconnect, one 1688 * for the reselection, one to get the 1689 * reselection data and one to complete the 1690 * command. If we guess the reselected 1691 * command here and prepare it, we only need 1692 * to get a reselection data interrupt if we 1693 * guessed wrongly. Since the interrupt 1694 * overhead is much greater than the command 1695 * setup, this would be an efficient 1696 * optimisation particularly as we probably 1697 * only have one outstanding command on a 1698 * target most of the time */ 1699 1700 resume_offset = process_selection(host, dsp); 1701 1702 } 1703 1704 } 1705 1706 if(resume_offset) { 1707 if(hostdata->state != NCR_700_HOST_BUSY) { 1708 printk(KERN_ERR "scsi%d: Driver error: resume at 0x%08x [0x%04x] with non busy host!\n", 1709 host->host_no, resume_offset, resume_offset - hostdata->pScript); 1710 hostdata->state = NCR_700_HOST_BUSY; 1711 } 1712 1713 DEBUG(("Attempting to resume at %x\n", resume_offset)); 1714 NCR_700_clear_fifo(host); 1715 NCR_700_writel(resume_offset, host, DSP_REG); 1716 } 1717 /* There is probably a technical no-no about this: If we're a 1718 * shared interrupt and we got this interrupt because the 1719 * other device needs servicing not us, we're still going to 1720 * check our queued commands here---of course, there shouldn't 1721 * be any outstanding.... */ 1722 if(hostdata->state == NCR_700_HOST_FREE) { 1723 int i; 1724 1725 for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) { 1726 /* fairness: always run the queue from the last 1727 * position we left off */ 1728 int j = (i + hostdata->saved_slot_position) 1729 % NCR_700_COMMAND_SLOTS_PER_HOST; 1730 1731 if(hostdata->slots[j].state != NCR_700_SLOT_QUEUED) 1732 continue; 1733 if(NCR_700_start_command(hostdata->slots[j].cmnd)) { 1734 DEBUG(("scsi%d: Issuing saved command slot %p, cmd %p\t\n", 1735 host->host_no, &hostdata->slots[j], 1736 hostdata->slots[j].cmnd)); 1737 hostdata->saved_slot_position = j + 1; 1738 } 1739 1740 break; 1741 } 1742 } 1743 out_unlock: 1744 spin_unlock_irqrestore(host->host_lock, flags); 1745 return IRQ_RETVAL(handled); 1746 } 1747 1748 static int 1749 NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *)) 1750 { 1751 struct NCR_700_Host_Parameters *hostdata = 1752 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0]; 1753 __u32 move_ins; 1754 enum dma_data_direction direction; 1755 struct NCR_700_command_slot *slot; 1756 1757 if(hostdata->command_slot_count >= NCR_700_COMMAND_SLOTS_PER_HOST) { 1758 /* We're over our allocation, this should never happen 1759 * since we report the max allocation to the mid layer */ 1760 printk(KERN_WARNING "scsi%d: Command depth has gone over queue depth\n", SCp->device->host->host_no); 1761 return 1; 1762 } 1763 /* check for untagged commands. We cannot have any outstanding 1764 * commands if we accept them. Commands could be untagged because: 1765 * 1766 * - The tag negotiated bitmap is clear 1767 * - The blk layer sent and untagged command 1768 */ 1769 if(NCR_700_get_depth(SCp->device) != 0 1770 && (!(hostdata->tag_negotiated & (1<<scmd_id(SCp))) 1771 || !(SCp->flags & SCMD_TAGGED))) { 1772 CDEBUG(KERN_ERR, SCp, "has non zero depth %d\n", 1773 NCR_700_get_depth(SCp->device)); 1774 return SCSI_MLQUEUE_DEVICE_BUSY; 1775 } 1776 if(NCR_700_get_depth(SCp->device) >= SCp->device->queue_depth) { 1777 CDEBUG(KERN_ERR, SCp, "has max tag depth %d\n", 1778 NCR_700_get_depth(SCp->device)); 1779 return SCSI_MLQUEUE_DEVICE_BUSY; 1780 } 1781 NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) + 1); 1782 1783 /* begin the command here */ 1784 /* no need to check for NULL, test for command_slot_count above 1785 * ensures a slot is free */ 1786 slot = find_empty_slot(hostdata); 1787 1788 slot->cmnd = SCp; 1789 1790 SCp->scsi_done = done; 1791 SCp->host_scribble = (unsigned char *)slot; 1792 SCp->SCp.ptr = NULL; 1793 SCp->SCp.buffer = NULL; 1794 1795 #ifdef NCR_700_DEBUG 1796 printk("53c700: scsi%d, command ", SCp->device->host->host_no); 1797 scsi_print_command(SCp); 1798 #endif 1799 if ((SCp->flags & SCMD_TAGGED) 1800 && (hostdata->tag_negotiated &(1<<scmd_id(SCp))) == 0 1801 && NCR_700_get_tag_neg_state(SCp->device) == NCR_700_START_TAG_NEGOTIATION) { 1802 scmd_printk(KERN_ERR, SCp, "Enabling Tag Command Queuing\n"); 1803 hostdata->tag_negotiated |= (1<<scmd_id(SCp)); 1804 NCR_700_set_tag_neg_state(SCp->device, NCR_700_DURING_TAG_NEGOTIATION); 1805 } 1806 1807 /* here we may have to process an untagged command. The gate 1808 * above ensures that this will be the only one outstanding, 1809 * so clear the tag negotiated bit. 1810 * 1811 * FIXME: This will royally screw up on multiple LUN devices 1812 * */ 1813 if (!(SCp->flags & SCMD_TAGGED) 1814 && (hostdata->tag_negotiated &(1<<scmd_id(SCp)))) { 1815 scmd_printk(KERN_INFO, SCp, "Disabling Tag Command Queuing\n"); 1816 hostdata->tag_negotiated &= ~(1<<scmd_id(SCp)); 1817 } 1818 1819 if ((hostdata->tag_negotiated & (1<<scmd_id(SCp))) && 1820 SCp->device->simple_tags) { 1821 slot->tag = SCp->request->tag; 1822 CDEBUG(KERN_DEBUG, SCp, "sending out tag %d, slot %p\n", 1823 slot->tag, slot); 1824 } else { 1825 slot->tag = SCSI_NO_TAG; 1826 /* must populate current_cmnd for scsi_find_tag to work */ 1827 SCp->device->current_cmnd = SCp; 1828 } 1829 /* sanity check: some of the commands generated by the mid-layer 1830 * have an eccentric idea of their sc_data_direction */ 1831 if(!scsi_sg_count(SCp) && !scsi_bufflen(SCp) && 1832 SCp->sc_data_direction != DMA_NONE) { 1833 #ifdef NCR_700_DEBUG 1834 printk("53c700: Command"); 1835 scsi_print_command(SCp); 1836 printk("Has wrong data direction %d\n", SCp->sc_data_direction); 1837 #endif 1838 SCp->sc_data_direction = DMA_NONE; 1839 } 1840 1841 switch (SCp->cmnd[0]) { 1842 case REQUEST_SENSE: 1843 /* clear the internal sense magic */ 1844 SCp->cmnd[6] = 0; 1845 /* fall through */ 1846 default: 1847 /* OK, get it from the command */ 1848 switch(SCp->sc_data_direction) { 1849 case DMA_BIDIRECTIONAL: 1850 default: 1851 printk(KERN_ERR "53c700: Unknown command for data direction "); 1852 scsi_print_command(SCp); 1853 1854 move_ins = 0; 1855 break; 1856 case DMA_NONE: 1857 move_ins = 0; 1858 break; 1859 case DMA_FROM_DEVICE: 1860 move_ins = SCRIPT_MOVE_DATA_IN; 1861 break; 1862 case DMA_TO_DEVICE: 1863 move_ins = SCRIPT_MOVE_DATA_OUT; 1864 break; 1865 } 1866 } 1867 1868 /* now build the scatter gather list */ 1869 direction = SCp->sc_data_direction; 1870 if(move_ins != 0) { 1871 int i; 1872 int sg_count; 1873 dma_addr_t vPtr = 0; 1874 struct scatterlist *sg; 1875 __u32 count = 0; 1876 1877 sg_count = scsi_dma_map(SCp); 1878 BUG_ON(sg_count < 0); 1879 1880 scsi_for_each_sg(SCp, sg, sg_count, i) { 1881 vPtr = sg_dma_address(sg); 1882 count = sg_dma_len(sg); 1883 1884 slot->SG[i].ins = bS_to_host(move_ins | count); 1885 DEBUG((" scatter block %d: move %d[%08x] from 0x%lx\n", 1886 i, count, slot->SG[i].ins, (unsigned long)vPtr)); 1887 slot->SG[i].pAddr = bS_to_host(vPtr); 1888 } 1889 slot->SG[i].ins = bS_to_host(SCRIPT_RETURN); 1890 slot->SG[i].pAddr = 0; 1891 dma_cache_sync(hostdata->dev, slot->SG, sizeof(slot->SG), DMA_TO_DEVICE); 1892 DEBUG((" SETTING %08lx to %x\n", 1893 (&slot->pSG[i].ins), 1894 slot->SG[i].ins)); 1895 } 1896 slot->resume_offset = 0; 1897 slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd, 1898 MAX_COMMAND_SIZE, DMA_TO_DEVICE); 1899 NCR_700_start_command(SCp); 1900 return 0; 1901 } 1902 1903 STATIC DEF_SCSI_QCMD(NCR_700_queuecommand) 1904 1905 STATIC int 1906 NCR_700_abort(struct scsi_cmnd * SCp) 1907 { 1908 struct NCR_700_command_slot *slot; 1909 1910 scmd_printk(KERN_INFO, SCp, "abort command\n"); 1911 1912 slot = (struct NCR_700_command_slot *)SCp->host_scribble; 1913 1914 if(slot == NULL) 1915 /* no outstanding command to abort */ 1916 return SUCCESS; 1917 if(SCp->cmnd[0] == TEST_UNIT_READY) { 1918 /* FIXME: This is because of a problem in the new 1919 * error handler. When it is in error recovery, it 1920 * will send a TUR to a device it thinks may still be 1921 * showing a problem. If the TUR isn't responded to, 1922 * it will abort it and mark the device off line. 1923 * Unfortunately, it does no other error recovery, so 1924 * this would leave us with an outstanding command 1925 * occupying a slot. Rather than allow this to 1926 * happen, we issue a bus reset to force all 1927 * outstanding commands to terminate here. */ 1928 NCR_700_internal_bus_reset(SCp->device->host); 1929 /* still drop through and return failed */ 1930 } 1931 return FAILED; 1932 1933 } 1934 1935 STATIC int 1936 NCR_700_bus_reset(struct scsi_cmnd * SCp) 1937 { 1938 DECLARE_COMPLETION_ONSTACK(complete); 1939 struct NCR_700_Host_Parameters *hostdata = 1940 (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0]; 1941 1942 scmd_printk(KERN_INFO, SCp, 1943 "New error handler wants BUS reset, cmd %p\n\t", SCp); 1944 scsi_print_command(SCp); 1945 1946 /* In theory, eh_complete should always be null because the 1947 * eh is single threaded, but just in case we're handling a 1948 * reset via sg or something */ 1949 spin_lock_irq(SCp->device->host->host_lock); 1950 while (hostdata->eh_complete != NULL) { 1951 spin_unlock_irq(SCp->device->host->host_lock); 1952 msleep_interruptible(100); 1953 spin_lock_irq(SCp->device->host->host_lock); 1954 } 1955 1956 hostdata->eh_complete = &complete; 1957 NCR_700_internal_bus_reset(SCp->device->host); 1958 1959 spin_unlock_irq(SCp->device->host->host_lock); 1960 wait_for_completion(&complete); 1961 spin_lock_irq(SCp->device->host->host_lock); 1962 1963 hostdata->eh_complete = NULL; 1964 /* Revalidate the transport parameters of the failing device */ 1965 if(hostdata->fast) 1966 spi_schedule_dv_device(SCp->device); 1967 1968 spin_unlock_irq(SCp->device->host->host_lock); 1969 return SUCCESS; 1970 } 1971 1972 STATIC int 1973 NCR_700_host_reset(struct scsi_cmnd * SCp) 1974 { 1975 scmd_printk(KERN_INFO, SCp, "New error handler wants HOST reset\n\t"); 1976 scsi_print_command(SCp); 1977 1978 spin_lock_irq(SCp->device->host->host_lock); 1979 1980 NCR_700_internal_bus_reset(SCp->device->host); 1981 NCR_700_chip_reset(SCp->device->host); 1982 1983 spin_unlock_irq(SCp->device->host->host_lock); 1984 1985 return SUCCESS; 1986 } 1987 1988 STATIC void 1989 NCR_700_set_period(struct scsi_target *STp, int period) 1990 { 1991 struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent); 1992 struct NCR_700_Host_Parameters *hostdata = 1993 (struct NCR_700_Host_Parameters *)SHp->hostdata[0]; 1994 1995 if(!hostdata->fast) 1996 return; 1997 1998 if(period < hostdata->min_period) 1999 period = hostdata->min_period; 2000 2001 spi_period(STp) = period; 2002 spi_flags(STp) &= ~(NCR_700_DEV_NEGOTIATED_SYNC | 2003 NCR_700_DEV_BEGIN_SYNC_NEGOTIATION); 2004 spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION; 2005 } 2006 2007 STATIC void 2008 NCR_700_set_offset(struct scsi_target *STp, int offset) 2009 { 2010 struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent); 2011 struct NCR_700_Host_Parameters *hostdata = 2012 (struct NCR_700_Host_Parameters *)SHp->hostdata[0]; 2013 int max_offset = hostdata->chip710 2014 ? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET; 2015 2016 if(!hostdata->fast) 2017 return; 2018 2019 if(offset > max_offset) 2020 offset = max_offset; 2021 2022 /* if we're currently async, make sure the period is reasonable */ 2023 if(spi_offset(STp) == 0 && (spi_period(STp) < hostdata->min_period || 2024 spi_period(STp) > 0xff)) 2025 spi_period(STp) = hostdata->min_period; 2026 2027 spi_offset(STp) = offset; 2028 spi_flags(STp) &= ~(NCR_700_DEV_NEGOTIATED_SYNC | 2029 NCR_700_DEV_BEGIN_SYNC_NEGOTIATION); 2030 spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION; 2031 } 2032 2033 STATIC int 2034 NCR_700_slave_alloc(struct scsi_device *SDp) 2035 { 2036 SDp->hostdata = kzalloc(sizeof(struct NCR_700_Device_Parameters), 2037 GFP_KERNEL); 2038 2039 if (!SDp->hostdata) 2040 return -ENOMEM; 2041 2042 return 0; 2043 } 2044 2045 STATIC int 2046 NCR_700_slave_configure(struct scsi_device *SDp) 2047 { 2048 struct NCR_700_Host_Parameters *hostdata = 2049 (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0]; 2050 2051 /* to do here: allocate memory; build a queue_full list */ 2052 if(SDp->tagged_supported) { 2053 scsi_change_queue_depth(SDp, NCR_700_DEFAULT_TAGS); 2054 NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION); 2055 } 2056 2057 if(hostdata->fast) { 2058 /* Find the correct offset and period via domain validation */ 2059 if (!spi_initial_dv(SDp->sdev_target)) 2060 spi_dv_device(SDp); 2061 } else { 2062 spi_offset(SDp->sdev_target) = 0; 2063 spi_period(SDp->sdev_target) = 0; 2064 } 2065 return 0; 2066 } 2067 2068 STATIC void 2069 NCR_700_slave_destroy(struct scsi_device *SDp) 2070 { 2071 kfree(SDp->hostdata); 2072 SDp->hostdata = NULL; 2073 } 2074 2075 static int 2076 NCR_700_change_queue_depth(struct scsi_device *SDp, int depth) 2077 { 2078 if (depth > NCR_700_MAX_TAGS) 2079 depth = NCR_700_MAX_TAGS; 2080 return scsi_change_queue_depth(SDp, depth); 2081 } 2082 2083 static ssize_t 2084 NCR_700_show_active_tags(struct device *dev, struct device_attribute *attr, char *buf) 2085 { 2086 struct scsi_device *SDp = to_scsi_device(dev); 2087 2088 return snprintf(buf, 20, "%d\n", NCR_700_get_depth(SDp)); 2089 } 2090 2091 static struct device_attribute NCR_700_active_tags_attr = { 2092 .attr = { 2093 .name = "active_tags", 2094 .mode = S_IRUGO, 2095 }, 2096 .show = NCR_700_show_active_tags, 2097 }; 2098 2099 STATIC struct device_attribute *NCR_700_dev_attrs[] = { 2100 &NCR_700_active_tags_attr, 2101 NULL, 2102 }; 2103 2104 EXPORT_SYMBOL(NCR_700_detect); 2105 EXPORT_SYMBOL(NCR_700_release); 2106 EXPORT_SYMBOL(NCR_700_intr); 2107 2108 static struct spi_function_template NCR_700_transport_functions = { 2109 .set_period = NCR_700_set_period, 2110 .show_period = 1, 2111 .set_offset = NCR_700_set_offset, 2112 .show_offset = 1, 2113 }; 2114 2115 static int __init NCR_700_init(void) 2116 { 2117 NCR_700_transport_template = spi_attach_transport(&NCR_700_transport_functions); 2118 if(!NCR_700_transport_template) 2119 return -ENODEV; 2120 return 0; 2121 } 2122 2123 static void __exit NCR_700_exit(void) 2124 { 2125 spi_release_transport(NCR_700_transport_template); 2126 } 2127 2128 module_init(NCR_700_init); 2129 module_exit(NCR_700_exit); 2130 2131