1 // SPDX-License-Identifier: GPL-2.0-only 2 /* envctrl.c: Temperature and Fan monitoring on Machines providing it. 3 * 4 * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) 5 * Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com) 6 * VT - The implementation is to support Sun Microelectronics (SME) platform 7 * environment monitoring. SME platforms use pcf8584 as the i2c bus 8 * controller to access pcf8591 (8-bit A/D and D/A converter) and 9 * pcf8571 (256 x 8-bit static low-voltage RAM with I2C-bus interface). 10 * At board level, it follows SME Firmware I2C Specification. Reference: 11 * http://www-eu2.semiconductors.com/pip/PCF8584P 12 * http://www-eu2.semiconductors.com/pip/PCF8574AP 13 * http://www-eu2.semiconductors.com/pip/PCF8591P 14 * 15 * EB - Added support for CP1500 Global Address and PS/Voltage monitoring. 16 * Eric Brower <ebrower@usa.net> 17 * 18 * DB - Audit every copy_to_user in envctrl_read. 19 * Daniele Bellucci <bellucda@tiscali.it> 20 */ 21 22 #include <linux/module.h> 23 #include <linux/kthread.h> 24 #include <linux/delay.h> 25 #include <linux/ioport.h> 26 #include <linux/miscdevice.h> 27 #include <linux/kmod.h> 28 #include <linux/reboot.h> 29 #include <linux/slab.h> 30 #include <linux/of.h> 31 #include <linux/platform_device.h> 32 33 #include <linux/uaccess.h> 34 #include <asm/envctrl.h> 35 #include <asm/io.h> 36 37 #define DRIVER_NAME "envctrl" 38 #define PFX DRIVER_NAME ": " 39 40 #define PCF8584_ADDRESS 0x55 41 42 #define CONTROL_PIN 0x80 43 #define CONTROL_ES0 0x40 44 #define CONTROL_ES1 0x20 45 #define CONTROL_ES2 0x10 46 #define CONTROL_ENI 0x08 47 #define CONTROL_STA 0x04 48 #define CONTROL_STO 0x02 49 #define CONTROL_ACK 0x01 50 51 #define STATUS_PIN 0x80 52 #define STATUS_STS 0x20 53 #define STATUS_BER 0x10 54 #define STATUS_LRB 0x08 55 #define STATUS_AD0 0x08 56 #define STATUS_AAB 0x04 57 #define STATUS_LAB 0x02 58 #define STATUS_BB 0x01 59 60 /* 61 * CLK Mode Register. 62 */ 63 #define BUS_CLK_90 0x00 64 #define BUS_CLK_45 0x01 65 #define BUS_CLK_11 0x02 66 #define BUS_CLK_1_5 0x03 67 68 #define CLK_3 0x00 69 #define CLK_4_43 0x10 70 #define CLK_6 0x14 71 #define CLK_8 0x18 72 #define CLK_12 0x1c 73 74 #define OBD_SEND_START 0xc5 /* value to generate I2c_bus START condition */ 75 #define OBD_SEND_STOP 0xc3 /* value to generate I2c_bus STOP condition */ 76 77 /* Monitor type of i2c child device. 78 * Firmware definitions. 79 */ 80 #define PCF8584_MAX_CHANNELS 8 81 #define PCF8584_GLOBALADDR_TYPE 6 /* global address monitor */ 82 #define PCF8584_FANSTAT_TYPE 3 /* fan status monitor */ 83 #define PCF8584_VOLTAGE_TYPE 2 /* voltage monitor */ 84 #define PCF8584_TEMP_TYPE 1 /* temperature monitor*/ 85 86 /* Monitor type of i2c child device. 87 * Driver definitions. 88 */ 89 #define ENVCTRL_NOMON 0 90 #define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */ 91 #define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */ 92 #define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */ 93 #define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */ 94 /* monitor */ 95 #define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */ 96 #define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */ 97 #define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */ 98 #define ENVCTRL_GLOBALADDR_MON 8 /* global address */ 99 100 /* Child device type. 101 * Driver definitions. 102 */ 103 #define I2C_ADC 0 /* pcf8591 */ 104 #define I2C_GPIO 1 /* pcf8571 */ 105 106 /* Data read from child device may need to decode 107 * through a data table and a scale. 108 * Translation type as defined by firmware. 109 */ 110 #define ENVCTRL_TRANSLATE_NO 0 111 #define ENVCTRL_TRANSLATE_PARTIAL 1 112 #define ENVCTRL_TRANSLATE_COMBINED 2 113 #define ENVCTRL_TRANSLATE_FULL 3 /* table[data] */ 114 #define ENVCTRL_TRANSLATE_SCALE 4 /* table[data]/scale */ 115 116 /* Driver miscellaneous definitions. */ 117 #define ENVCTRL_MAX_CPU 4 118 #define CHANNEL_DESC_SZ 256 119 120 /* Mask values for combined GlobalAddress/PowerStatus node */ 121 #define ENVCTRL_GLOBALADDR_ADDR_MASK 0x1F 122 #define ENVCTRL_GLOBALADDR_PSTAT_MASK 0x60 123 124 /* Node 0x70 ignored on CompactPCI CP1400/1500 platforms 125 * (see envctrl_init_i2c_child) 126 */ 127 #define ENVCTRL_CPCI_IGNORED_NODE 0x70 128 129 #define PCF8584_DATA 0x00 130 #define PCF8584_CSR 0x01 131 132 /* Each child device can be monitored by up to PCF8584_MAX_CHANNELS. 133 * Property of a port or channel as defined by the firmware. 134 */ 135 struct pcf8584_channel { 136 unsigned char chnl_no; 137 unsigned char io_direction; 138 unsigned char type; 139 unsigned char last; 140 }; 141 142 /* Each child device may have one or more tables of bytes to help decode 143 * data. Table property as defined by the firmware. 144 */ 145 struct pcf8584_tblprop { 146 unsigned int type; 147 unsigned int scale; 148 unsigned int offset; /* offset from the beginning of the table */ 149 unsigned int size; 150 }; 151 152 /* i2c child */ 153 struct i2c_child_t { 154 /* Either ADC or GPIO. */ 155 unsigned char i2ctype; 156 unsigned long addr; 157 struct pcf8584_channel chnl_array[PCF8584_MAX_CHANNELS]; 158 159 /* Channel info. */ 160 unsigned int total_chnls; /* Number of monitor channels. */ 161 unsigned char fan_mask; /* Byte mask for fan status channels. */ 162 unsigned char voltage_mask; /* Byte mask for voltage status channels. */ 163 struct pcf8584_tblprop tblprop_array[PCF8584_MAX_CHANNELS]; 164 165 /* Properties of all monitor channels. */ 166 unsigned int total_tbls; /* Number of monitor tables. */ 167 char *tables; /* Pointer to table(s). */ 168 char chnls_desc[CHANNEL_DESC_SZ]; /* Channel description. */ 169 char mon_type[PCF8584_MAX_CHANNELS]; 170 }; 171 172 static void __iomem *i2c; 173 static struct i2c_child_t i2c_childlist[ENVCTRL_MAX_CPU*2]; 174 static unsigned char chnls_mask[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; 175 static unsigned int warning_temperature = 0; 176 static unsigned int shutdown_temperature = 0; 177 static char read_cpu; 178 179 /* Forward declarations. */ 180 static struct i2c_child_t *envctrl_get_i2c_child(unsigned char); 181 182 /* Function Description: Test the PIN bit (Pending Interrupt Not) 183 * to test when serial transmission is completed . 184 * Return : None. 185 */ 186 static void envtrl_i2c_test_pin(void) 187 { 188 int limit = 1000000; 189 190 while (--limit > 0) { 191 if (!(readb(i2c + PCF8584_CSR) & STATUS_PIN)) 192 break; 193 udelay(1); 194 } 195 196 if (limit <= 0) 197 printk(KERN_INFO PFX "Pin status will not clear.\n"); 198 } 199 200 /* Function Description: Test busy bit. 201 * Return : None. 202 */ 203 static void envctrl_i2c_test_bb(void) 204 { 205 int limit = 1000000; 206 207 while (--limit > 0) { 208 /* Busy bit 0 means busy. */ 209 if (readb(i2c + PCF8584_CSR) & STATUS_BB) 210 break; 211 udelay(1); 212 } 213 214 if (limit <= 0) 215 printk(KERN_INFO PFX "Busy bit will not clear.\n"); 216 } 217 218 /* Function Description: Send the address for a read access. 219 * Return : 0 if not acknowledged, otherwise acknowledged. 220 */ 221 static int envctrl_i2c_read_addr(unsigned char addr) 222 { 223 envctrl_i2c_test_bb(); 224 225 /* Load address. */ 226 writeb(addr + 1, i2c + PCF8584_DATA); 227 228 envctrl_i2c_test_bb(); 229 230 writeb(OBD_SEND_START, i2c + PCF8584_CSR); 231 232 /* Wait for PIN. */ 233 envtrl_i2c_test_pin(); 234 235 /* CSR 0 means acknowledged. */ 236 if (!(readb(i2c + PCF8584_CSR) & STATUS_LRB)) { 237 return readb(i2c + PCF8584_DATA); 238 } else { 239 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR); 240 return 0; 241 } 242 } 243 244 /* Function Description: Send the address for write mode. 245 * Return : None. 246 */ 247 static void envctrl_i2c_write_addr(unsigned char addr) 248 { 249 envctrl_i2c_test_bb(); 250 writeb(addr, i2c + PCF8584_DATA); 251 252 /* Generate Start condition. */ 253 writeb(OBD_SEND_START, i2c + PCF8584_CSR); 254 } 255 256 /* Function Description: Read 1 byte of data from addr 257 * set by envctrl_i2c_read_addr() 258 * Return : Data from address set by envctrl_i2c_read_addr(). 259 */ 260 static unsigned char envctrl_i2c_read_data(void) 261 { 262 envtrl_i2c_test_pin(); 263 writeb(CONTROL_ES0, i2c + PCF8584_CSR); /* Send neg ack. */ 264 return readb(i2c + PCF8584_DATA); 265 } 266 267 /* Function Description: Instruct the device which port to read data from. 268 * Return : None. 269 */ 270 static void envctrl_i2c_write_data(unsigned char port) 271 { 272 envtrl_i2c_test_pin(); 273 writeb(port, i2c + PCF8584_DATA); 274 } 275 276 /* Function Description: Generate Stop condition after last byte is sent. 277 * Return : None. 278 */ 279 static void envctrl_i2c_stop(void) 280 { 281 envtrl_i2c_test_pin(); 282 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR); 283 } 284 285 /* Function Description: Read adc device. 286 * Return : Data at address and port. 287 */ 288 static unsigned char envctrl_i2c_read_8591(unsigned char addr, unsigned char port) 289 { 290 /* Send address. */ 291 envctrl_i2c_write_addr(addr); 292 293 /* Setup port to read. */ 294 envctrl_i2c_write_data(port); 295 envctrl_i2c_stop(); 296 297 /* Read port. */ 298 envctrl_i2c_read_addr(addr); 299 300 /* Do a single byte read and send stop. */ 301 envctrl_i2c_read_data(); 302 envctrl_i2c_stop(); 303 304 return readb(i2c + PCF8584_DATA); 305 } 306 307 /* Function Description: Read gpio device. 308 * Return : Data at address. 309 */ 310 static unsigned char envctrl_i2c_read_8574(unsigned char addr) 311 { 312 unsigned char rd; 313 314 envctrl_i2c_read_addr(addr); 315 316 /* Do a single byte read and send stop. */ 317 rd = envctrl_i2c_read_data(); 318 envctrl_i2c_stop(); 319 return rd; 320 } 321 322 /* Function Description: Decode data read from an adc device using firmware 323 * table. 324 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 325 */ 326 static int envctrl_i2c_data_translate(unsigned char data, int translate_type, 327 int scale, char *tbl, char *bufdata) 328 { 329 int len = 0; 330 331 switch (translate_type) { 332 case ENVCTRL_TRANSLATE_NO: 333 /* No decode necessary. */ 334 len = 1; 335 bufdata[0] = data; 336 break; 337 338 case ENVCTRL_TRANSLATE_FULL: 339 /* Decode this way: data = table[data]. */ 340 len = 1; 341 bufdata[0] = tbl[data]; 342 break; 343 344 case ENVCTRL_TRANSLATE_SCALE: 345 /* Decode this way: data = table[data]/scale */ 346 sprintf(bufdata,"%d ", (tbl[data] * 10) / (scale)); 347 len = strlen(bufdata); 348 bufdata[len - 1] = bufdata[len - 2]; 349 bufdata[len - 2] = '.'; 350 break; 351 352 default: 353 break; 354 } 355 356 return len; 357 } 358 359 /* Function Description: Read cpu-related data such as cpu temperature, voltage. 360 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 361 */ 362 static int envctrl_read_cpu_info(int cpu, struct i2c_child_t *pchild, 363 char mon_type, unsigned char *bufdata) 364 { 365 unsigned char data; 366 int i, j = -1; 367 char *tbl; 368 369 /* Find the right monitor type and channel. */ 370 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 371 if (pchild->mon_type[i] == mon_type) { 372 if (++j == cpu) { 373 break; 374 } 375 } 376 } 377 378 if (j != cpu) 379 return 0; 380 381 /* Read data from address and port. */ 382 data = envctrl_i2c_read_8591((unsigned char)pchild->addr, 383 (unsigned char)pchild->chnl_array[i].chnl_no); 384 385 /* Find decoding table. */ 386 tbl = pchild->tables + pchild->tblprop_array[i].offset; 387 388 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type, 389 pchild->tblprop_array[i].scale, 390 tbl, bufdata); 391 } 392 393 /* Function Description: Read noncpu-related data such as motherboard 394 * temperature. 395 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 396 */ 397 static int envctrl_read_noncpu_info(struct i2c_child_t *pchild, 398 char mon_type, unsigned char *bufdata) 399 { 400 unsigned char data; 401 int i; 402 char *tbl = NULL; 403 404 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 405 if (pchild->mon_type[i] == mon_type) 406 break; 407 } 408 409 if (i >= PCF8584_MAX_CHANNELS) 410 return 0; 411 412 /* Read data from address and port. */ 413 data = envctrl_i2c_read_8591((unsigned char)pchild->addr, 414 (unsigned char)pchild->chnl_array[i].chnl_no); 415 416 /* Find decoding table. */ 417 tbl = pchild->tables + pchild->tblprop_array[i].offset; 418 419 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type, 420 pchild->tblprop_array[i].scale, 421 tbl, bufdata); 422 } 423 424 /* Function Description: Read fan status. 425 * Return : Always 1 byte. Status stored in bufdata. 426 */ 427 static int envctrl_i2c_fan_status(struct i2c_child_t *pchild, 428 unsigned char data, 429 char *bufdata) 430 { 431 unsigned char tmp, ret = 0; 432 int i, j = 0; 433 434 tmp = data & pchild->fan_mask; 435 436 if (tmp == pchild->fan_mask) { 437 /* All bits are on. All fans are functioning. */ 438 ret = ENVCTRL_ALL_FANS_GOOD; 439 } else if (tmp == 0) { 440 /* No bits are on. No fans are functioning. */ 441 ret = ENVCTRL_ALL_FANS_BAD; 442 } else { 443 /* Go through all channels, mark 'on' the matched bits. 444 * Notice that fan_mask may have discontiguous bits but 445 * return mask are always contiguous. For example if we 446 * monitor 4 fans at channels 0,1,2,4, the return mask 447 * should be 00010000 if only fan at channel 4 is working. 448 */ 449 for (i = 0; i < PCF8584_MAX_CHANNELS;i++) { 450 if (pchild->fan_mask & chnls_mask[i]) { 451 if (!(chnls_mask[i] & tmp)) 452 ret |= chnls_mask[j]; 453 454 j++; 455 } 456 } 457 } 458 459 bufdata[0] = ret; 460 return 1; 461 } 462 463 /* Function Description: Read global addressing line. 464 * Return : Always 1 byte. Status stored in bufdata. 465 */ 466 static int envctrl_i2c_globaladdr(struct i2c_child_t *pchild, 467 unsigned char data, 468 char *bufdata) 469 { 470 /* Translatation table is not necessary, as global 471 * addr is the integer value of the GA# bits. 472 * 473 * NOTE: MSB is documented as zero, but I see it as '1' always.... 474 * 475 * ----------------------------------------------- 476 * | 0 | FAL | DEG | GA4 | GA3 | GA2 | GA1 | GA0 | 477 * ----------------------------------------------- 478 * GA0 - GA4 integer value of Global Address (backplane slot#) 479 * DEG 0 = cPCI Power supply output is starting to degrade 480 * 1 = cPCI Power supply output is OK 481 * FAL 0 = cPCI Power supply has failed 482 * 1 = cPCI Power supply output is OK 483 */ 484 bufdata[0] = (data & ENVCTRL_GLOBALADDR_ADDR_MASK); 485 return 1; 486 } 487 488 /* Function Description: Read standard voltage and power supply status. 489 * Return : Always 1 byte. Status stored in bufdata. 490 */ 491 static unsigned char envctrl_i2c_voltage_status(struct i2c_child_t *pchild, 492 unsigned char data, 493 char *bufdata) 494 { 495 unsigned char tmp, ret = 0; 496 int i, j = 0; 497 498 tmp = data & pchild->voltage_mask; 499 500 /* Two channels are used to monitor voltage and power supply. */ 501 if (tmp == pchild->voltage_mask) { 502 /* All bits are on. Voltage and power supply are okay. */ 503 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD; 504 } else if (tmp == 0) { 505 /* All bits are off. Voltage and power supply are bad */ 506 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_BAD; 507 } else { 508 /* Either voltage or power supply has problem. */ 509 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 510 if (pchild->voltage_mask & chnls_mask[i]) { 511 j++; 512 513 /* Break out when there is a mismatch. */ 514 if (!(chnls_mask[i] & tmp)) 515 break; 516 } 517 } 518 519 /* Make a wish that hardware will always use the 520 * first channel for voltage and the second for 521 * power supply. 522 */ 523 if (j == 1) 524 ret = ENVCTRL_VOLTAGE_BAD; 525 else 526 ret = ENVCTRL_POWERSUPPLY_BAD; 527 } 528 529 bufdata[0] = ret; 530 return 1; 531 } 532 533 /* Function Description: Read a byte from /dev/envctrl. Mapped to user read(). 534 * Return: Number of read bytes. 0 for error. 535 */ 536 static ssize_t 537 envctrl_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) 538 { 539 struct i2c_child_t *pchild; 540 unsigned char data[10]; 541 int ret = 0; 542 543 /* Get the type of read as decided in ioctl() call. 544 * Find the appropriate i2c child. 545 * Get the data and put back to the user buffer. 546 */ 547 548 switch ((int)(long)file->private_data) { 549 case ENVCTRL_RD_WARNING_TEMPERATURE: 550 if (warning_temperature == 0) 551 return 0; 552 553 data[0] = (unsigned char)(warning_temperature); 554 ret = 1; 555 if (copy_to_user(buf, data, ret)) 556 ret = -EFAULT; 557 break; 558 559 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE: 560 if (shutdown_temperature == 0) 561 return 0; 562 563 data[0] = (unsigned char)(shutdown_temperature); 564 ret = 1; 565 if (copy_to_user(buf, data, ret)) 566 ret = -EFAULT; 567 break; 568 569 case ENVCTRL_RD_MTHRBD_TEMPERATURE: 570 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_MTHRBDTEMP_MON))) 571 return 0; 572 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_MTHRBDTEMP_MON, data); 573 if (copy_to_user(buf, data, ret)) 574 ret = -EFAULT; 575 break; 576 577 case ENVCTRL_RD_CPU_TEMPERATURE: 578 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) 579 return 0; 580 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUTEMP_MON, data); 581 582 /* Reset cpu to the default cpu0. */ 583 if (copy_to_user(buf, data, ret)) 584 ret = -EFAULT; 585 break; 586 587 case ENVCTRL_RD_CPU_VOLTAGE: 588 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUVOLTAGE_MON))) 589 return 0; 590 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUVOLTAGE_MON, data); 591 592 /* Reset cpu to the default cpu0. */ 593 if (copy_to_user(buf, data, ret)) 594 ret = -EFAULT; 595 break; 596 597 case ENVCTRL_RD_SCSI_TEMPERATURE: 598 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_SCSITEMP_MON))) 599 return 0; 600 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_SCSITEMP_MON, data); 601 if (copy_to_user(buf, data, ret)) 602 ret = -EFAULT; 603 break; 604 605 case ENVCTRL_RD_ETHERNET_TEMPERATURE: 606 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_ETHERTEMP_MON))) 607 return 0; 608 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_ETHERTEMP_MON, data); 609 if (copy_to_user(buf, data, ret)) 610 ret = -EFAULT; 611 break; 612 613 case ENVCTRL_RD_FAN_STATUS: 614 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_FANSTAT_MON))) 615 return 0; 616 data[0] = envctrl_i2c_read_8574(pchild->addr); 617 ret = envctrl_i2c_fan_status(pchild,data[0], data); 618 if (copy_to_user(buf, data, ret)) 619 ret = -EFAULT; 620 break; 621 622 case ENVCTRL_RD_GLOBALADDRESS: 623 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON))) 624 return 0; 625 data[0] = envctrl_i2c_read_8574(pchild->addr); 626 ret = envctrl_i2c_globaladdr(pchild, data[0], data); 627 if (copy_to_user(buf, data, ret)) 628 ret = -EFAULT; 629 break; 630 631 case ENVCTRL_RD_VOLTAGE_STATUS: 632 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_VOLTAGESTAT_MON))) 633 /* If voltage monitor not present, check for CPCI equivalent */ 634 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON))) 635 return 0; 636 data[0] = envctrl_i2c_read_8574(pchild->addr); 637 ret = envctrl_i2c_voltage_status(pchild, data[0], data); 638 if (copy_to_user(buf, data, ret)) 639 ret = -EFAULT; 640 break; 641 642 default: 643 break; 644 645 } 646 647 return ret; 648 } 649 650 /* Function Description: Command what to read. Mapped to user ioctl(). 651 * Return: Gives 0 for implemented commands, -EINVAL otherwise. 652 */ 653 static long 654 envctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 655 { 656 char __user *infobuf; 657 658 switch (cmd) { 659 case ENVCTRL_RD_WARNING_TEMPERATURE: 660 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE: 661 case ENVCTRL_RD_MTHRBD_TEMPERATURE: 662 case ENVCTRL_RD_FAN_STATUS: 663 case ENVCTRL_RD_VOLTAGE_STATUS: 664 case ENVCTRL_RD_ETHERNET_TEMPERATURE: 665 case ENVCTRL_RD_SCSI_TEMPERATURE: 666 case ENVCTRL_RD_GLOBALADDRESS: 667 file->private_data = (void *)(long)cmd; 668 break; 669 670 case ENVCTRL_RD_CPU_TEMPERATURE: 671 case ENVCTRL_RD_CPU_VOLTAGE: 672 /* Check to see if application passes in any cpu number, 673 * the default is cpu0. 674 */ 675 infobuf = (char __user *) arg; 676 if (infobuf == NULL) { 677 read_cpu = 0; 678 }else { 679 get_user(read_cpu, infobuf); 680 } 681 682 /* Save the command for use when reading. */ 683 file->private_data = (void *)(long)cmd; 684 break; 685 686 default: 687 return -EINVAL; 688 } 689 690 return 0; 691 } 692 693 /* Function Description: open device. Mapped to user open(). 694 * Return: Always 0. 695 */ 696 static int 697 envctrl_open(struct inode *inode, struct file *file) 698 { 699 file->private_data = NULL; 700 return 0; 701 } 702 703 /* Function Description: Open device. Mapped to user close(). 704 * Return: Always 0. 705 */ 706 static int 707 envctrl_release(struct inode *inode, struct file *file) 708 { 709 return 0; 710 } 711 712 static const struct file_operations envctrl_fops = { 713 .owner = THIS_MODULE, 714 .read = envctrl_read, 715 .unlocked_ioctl = envctrl_ioctl, 716 .compat_ioctl = compat_ptr_ioctl, 717 .open = envctrl_open, 718 .release = envctrl_release, 719 .llseek = noop_llseek, 720 }; 721 722 static struct miscdevice envctrl_dev = { 723 ENVCTRL_MINOR, 724 "envctrl", 725 &envctrl_fops 726 }; 727 728 /* Function Description: Set monitor type based on firmware description. 729 * Return: None. 730 */ 731 static void envctrl_set_mon(struct i2c_child_t *pchild, 732 const char *chnl_desc, 733 int chnl_no) 734 { 735 /* Firmware only has temperature type. It does not distinguish 736 * different kinds of temperatures. We use channel description 737 * to disinguish them. 738 */ 739 if (!(strcmp(chnl_desc,"temp,cpu")) || 740 !(strcmp(chnl_desc,"temp,cpu0")) || 741 !(strcmp(chnl_desc,"temp,cpu1")) || 742 !(strcmp(chnl_desc,"temp,cpu2")) || 743 !(strcmp(chnl_desc,"temp,cpu3"))) 744 pchild->mon_type[chnl_no] = ENVCTRL_CPUTEMP_MON; 745 746 if (!(strcmp(chnl_desc,"vddcore,cpu0")) || 747 !(strcmp(chnl_desc,"vddcore,cpu1")) || 748 !(strcmp(chnl_desc,"vddcore,cpu2")) || 749 !(strcmp(chnl_desc,"vddcore,cpu3"))) 750 pchild->mon_type[chnl_no] = ENVCTRL_CPUVOLTAGE_MON; 751 752 if (!(strcmp(chnl_desc,"temp,motherboard"))) 753 pchild->mon_type[chnl_no] = ENVCTRL_MTHRBDTEMP_MON; 754 755 if (!(strcmp(chnl_desc,"temp,scsi"))) 756 pchild->mon_type[chnl_no] = ENVCTRL_SCSITEMP_MON; 757 758 if (!(strcmp(chnl_desc,"temp,ethernet"))) 759 pchild->mon_type[chnl_no] = ENVCTRL_ETHERTEMP_MON; 760 } 761 762 /* Function Description: Initialize monitor channel with channel desc, 763 * decoding tables, monitor type, optional properties. 764 * Return: None. 765 */ 766 static void envctrl_init_adc(struct i2c_child_t *pchild, struct device_node *dp) 767 { 768 int i = 0, len; 769 const char *pos; 770 const unsigned int *pval; 771 772 /* Firmware describe channels into a stream separated by a '\0'. */ 773 pos = of_get_property(dp, "channels-description", &len); 774 775 while (len > 0) { 776 int l = strlen(pos) + 1; 777 envctrl_set_mon(pchild, pos, i++); 778 len -= l; 779 pos += l; 780 } 781 782 /* Get optional properties. */ 783 pval = of_get_property(dp, "warning-temp", NULL); 784 if (pval) 785 warning_temperature = *pval; 786 787 pval = of_get_property(dp, "shutdown-temp", NULL); 788 if (pval) 789 shutdown_temperature = *pval; 790 } 791 792 /* Function Description: Initialize child device monitoring fan status. 793 * Return: None. 794 */ 795 static void envctrl_init_fanstat(struct i2c_child_t *pchild) 796 { 797 int i; 798 799 /* Go through all channels and set up the mask. */ 800 for (i = 0; i < pchild->total_chnls; i++) 801 pchild->fan_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no]; 802 803 /* We only need to know if this child has fan status monitored. 804 * We don't care which channels since we have the mask already. 805 */ 806 pchild->mon_type[0] = ENVCTRL_FANSTAT_MON; 807 } 808 809 /* Function Description: Initialize child device for global addressing line. 810 * Return: None. 811 */ 812 static void envctrl_init_globaladdr(struct i2c_child_t *pchild) 813 { 814 int i; 815 816 /* Voltage/PowerSupply monitoring is piggybacked 817 * with Global Address on CompactPCI. See comments 818 * within envctrl_i2c_globaladdr for bit assignments. 819 * 820 * The mask is created here by assigning mask bits to each 821 * bit position that represents PCF8584_VOLTAGE_TYPE data. 822 * Channel numbers are not consecutive within the globaladdr 823 * node (why?), so we use the actual counter value as chnls_mask 824 * index instead of the chnl_array[x].chnl_no value. 825 * 826 * NOTE: This loop could be replaced with a constant representing 827 * a mask of bits 5&6 (ENVCTRL_GLOBALADDR_PSTAT_MASK). 828 */ 829 for (i = 0; i < pchild->total_chnls; i++) { 830 if (PCF8584_VOLTAGE_TYPE == pchild->chnl_array[i].type) { 831 pchild->voltage_mask |= chnls_mask[i]; 832 } 833 } 834 835 /* We only need to know if this child has global addressing 836 * line monitored. We don't care which channels since we know 837 * the mask already (ENVCTRL_GLOBALADDR_ADDR_MASK). 838 */ 839 pchild->mon_type[0] = ENVCTRL_GLOBALADDR_MON; 840 } 841 842 /* Initialize child device monitoring voltage status. */ 843 static void envctrl_init_voltage_status(struct i2c_child_t *pchild) 844 { 845 int i; 846 847 /* Go through all channels and set up the mask. */ 848 for (i = 0; i < pchild->total_chnls; i++) 849 pchild->voltage_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no]; 850 851 /* We only need to know if this child has voltage status monitored. 852 * We don't care which channels since we have the mask already. 853 */ 854 pchild->mon_type[0] = ENVCTRL_VOLTAGESTAT_MON; 855 } 856 857 /* Function Description: Initialize i2c child device. 858 * Return: None. 859 */ 860 static void envctrl_init_i2c_child(struct device_node *dp, 861 struct i2c_child_t *pchild) 862 { 863 int len, i, tbls_size = 0; 864 const void *pval; 865 866 /* Get device address. */ 867 pval = of_get_property(dp, "reg", &len); 868 memcpy(&pchild->addr, pval, len); 869 870 /* Get tables property. Read firmware temperature tables. */ 871 pval = of_get_property(dp, "translation", &len); 872 if (pval && len > 0) { 873 memcpy(pchild->tblprop_array, pval, len); 874 pchild->total_tbls = len / sizeof(struct pcf8584_tblprop); 875 for (i = 0; i < pchild->total_tbls; i++) { 876 if ((pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset) > tbls_size) { 877 tbls_size = pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset; 878 } 879 } 880 881 pchild->tables = kmalloc(tbls_size, GFP_KERNEL); 882 if (pchild->tables == NULL){ 883 printk(KERN_ERR PFX "Failed to allocate table.\n"); 884 return; 885 } 886 pval = of_get_property(dp, "tables", &len); 887 if (!pval || len <= 0) { 888 printk(KERN_ERR PFX "Failed to get table.\n"); 889 return; 890 } 891 memcpy(pchild->tables, pval, len); 892 } 893 894 /* SPARCengine ASM Reference Manual (ref. SMI doc 805-7581-04) 895 * sections 2.5, 3.5, 4.5 state node 0x70 for CP1400/1500 is 896 * "For Factory Use Only." 897 * 898 * We ignore the node on these platforms by assigning the 899 * 'NULL' monitor type. 900 */ 901 if (ENVCTRL_CPCI_IGNORED_NODE == pchild->addr) { 902 struct device_node *root_node; 903 int len; 904 905 root_node = of_find_node_by_path("/"); 906 if (of_node_name_eq(root_node, "SUNW,UltraSPARC-IIi-cEngine")) { 907 for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) { 908 pchild->mon_type[len] = ENVCTRL_NOMON; 909 } 910 of_node_put(root_node); 911 return; 912 } 913 of_node_put(root_node); 914 } 915 916 /* Get the monitor channels. */ 917 pval = of_get_property(dp, "channels-in-use", &len); 918 memcpy(pchild->chnl_array, pval, len); 919 pchild->total_chnls = len / sizeof(struct pcf8584_channel); 920 921 for (i = 0; i < pchild->total_chnls; i++) { 922 switch (pchild->chnl_array[i].type) { 923 case PCF8584_TEMP_TYPE: 924 envctrl_init_adc(pchild, dp); 925 break; 926 927 case PCF8584_GLOBALADDR_TYPE: 928 envctrl_init_globaladdr(pchild); 929 i = pchild->total_chnls; 930 break; 931 932 case PCF8584_FANSTAT_TYPE: 933 envctrl_init_fanstat(pchild); 934 i = pchild->total_chnls; 935 break; 936 937 case PCF8584_VOLTAGE_TYPE: 938 if (pchild->i2ctype == I2C_ADC) { 939 envctrl_init_adc(pchild,dp); 940 } else { 941 envctrl_init_voltage_status(pchild); 942 } 943 i = pchild->total_chnls; 944 break; 945 946 default: 947 break; 948 } 949 } 950 } 951 952 /* Function Description: Search the child device list for a device. 953 * Return : The i2c child if found. NULL otherwise. 954 */ 955 static struct i2c_child_t *envctrl_get_i2c_child(unsigned char mon_type) 956 { 957 int i, j; 958 959 for (i = 0; i < ENVCTRL_MAX_CPU*2; i++) { 960 for (j = 0; j < PCF8584_MAX_CHANNELS; j++) { 961 if (i2c_childlist[i].mon_type[j] == mon_type) { 962 return (struct i2c_child_t *)(&(i2c_childlist[i])); 963 } 964 } 965 } 966 return NULL; 967 } 968 969 static void envctrl_do_shutdown(void) 970 { 971 static int inprog = 0; 972 973 if (inprog != 0) 974 return; 975 976 inprog = 1; 977 printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n"); 978 orderly_poweroff(true); 979 } 980 981 static struct task_struct *kenvctrld_task; 982 983 static int kenvctrld(void *__unused) 984 { 985 int poll_interval; 986 int whichcpu; 987 char tempbuf[10]; 988 struct i2c_child_t *cputemp; 989 990 if (NULL == (cputemp = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) { 991 printk(KERN_ERR PFX 992 "kenvctrld unable to monitor CPU temp-- exiting\n"); 993 return -ENODEV; 994 } 995 996 poll_interval = 5000; /* TODO env_mon_interval */ 997 998 printk(KERN_INFO PFX "%s starting...\n", current->comm); 999 for (;;) { 1000 msleep_interruptible(poll_interval); 1001 1002 if (kthread_should_stop()) 1003 break; 1004 1005 for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) { 1006 if (0 < envctrl_read_cpu_info(whichcpu, cputemp, 1007 ENVCTRL_CPUTEMP_MON, 1008 tempbuf)) { 1009 if (tempbuf[0] >= shutdown_temperature) { 1010 printk(KERN_CRIT 1011 "%s: WARNING: CPU%i temperature %i C meets or exceeds "\ 1012 "shutdown threshold %i C\n", 1013 current->comm, whichcpu, 1014 tempbuf[0], shutdown_temperature); 1015 envctrl_do_shutdown(); 1016 } 1017 } 1018 } 1019 } 1020 printk(KERN_INFO PFX "%s exiting...\n", current->comm); 1021 return 0; 1022 } 1023 1024 static int envctrl_probe(struct platform_device *op) 1025 { 1026 struct device_node *dp; 1027 int index, err; 1028 1029 if (i2c) 1030 return -EINVAL; 1031 1032 i2c = of_ioremap(&op->resource[0], 0, 0x2, DRIVER_NAME); 1033 if (!i2c) 1034 return -ENOMEM; 1035 1036 index = 0; 1037 dp = op->dev.of_node->child; 1038 while (dp) { 1039 if (of_node_name_eq(dp, "gpio")) { 1040 i2c_childlist[index].i2ctype = I2C_GPIO; 1041 envctrl_init_i2c_child(dp, &(i2c_childlist[index++])); 1042 } else if (of_node_name_eq(dp, "adc")) { 1043 i2c_childlist[index].i2ctype = I2C_ADC; 1044 envctrl_init_i2c_child(dp, &(i2c_childlist[index++])); 1045 } 1046 1047 dp = dp->sibling; 1048 } 1049 1050 /* Set device address. */ 1051 writeb(CONTROL_PIN, i2c + PCF8584_CSR); 1052 writeb(PCF8584_ADDRESS, i2c + PCF8584_DATA); 1053 1054 /* Set system clock and SCL frequencies. */ 1055 writeb(CONTROL_PIN | CONTROL_ES1, i2c + PCF8584_CSR); 1056 writeb(CLK_4_43 | BUS_CLK_90, i2c + PCF8584_DATA); 1057 1058 /* Enable serial interface. */ 1059 writeb(CONTROL_PIN | CONTROL_ES0 | CONTROL_ACK, i2c + PCF8584_CSR); 1060 udelay(200); 1061 1062 /* Register the device as a minor miscellaneous device. */ 1063 err = misc_register(&envctrl_dev); 1064 if (err) { 1065 printk(KERN_ERR PFX "Unable to get misc minor %d\n", 1066 envctrl_dev.minor); 1067 goto out_iounmap; 1068 } 1069 1070 /* Note above traversal routine post-incremented 'i' to accommodate 1071 * a next child device, so we decrement before reverse-traversal of 1072 * child devices. 1073 */ 1074 printk(KERN_INFO PFX "Initialized "); 1075 for (--index; index >= 0; --index) { 1076 printk("[%s 0x%lx]%s", 1077 (I2C_ADC == i2c_childlist[index].i2ctype) ? "adc" : 1078 ((I2C_GPIO == i2c_childlist[index].i2ctype) ? "gpio" : "unknown"), 1079 i2c_childlist[index].addr, (0 == index) ? "\n" : " "); 1080 } 1081 1082 kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld"); 1083 if (IS_ERR(kenvctrld_task)) { 1084 err = PTR_ERR(kenvctrld_task); 1085 goto out_deregister; 1086 } 1087 1088 return 0; 1089 1090 out_deregister: 1091 misc_deregister(&envctrl_dev); 1092 out_iounmap: 1093 of_iounmap(&op->resource[0], i2c, 0x2); 1094 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++) 1095 kfree(i2c_childlist[index].tables); 1096 1097 return err; 1098 } 1099 1100 static void envctrl_remove(struct platform_device *op) 1101 { 1102 int index; 1103 1104 kthread_stop(kenvctrld_task); 1105 1106 of_iounmap(&op->resource[0], i2c, 0x2); 1107 misc_deregister(&envctrl_dev); 1108 1109 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++) 1110 kfree(i2c_childlist[index].tables); 1111 } 1112 1113 static const struct of_device_id envctrl_match[] = { 1114 { 1115 .name = "i2c", 1116 .compatible = "i2cpcf,8584", 1117 }, 1118 {}, 1119 }; 1120 MODULE_DEVICE_TABLE(of, envctrl_match); 1121 1122 static struct platform_driver envctrl_driver = { 1123 .driver = { 1124 .name = DRIVER_NAME, 1125 .of_match_table = envctrl_match, 1126 }, 1127 .probe = envctrl_probe, 1128 .remove_new = envctrl_remove, 1129 }; 1130 1131 module_platform_driver(envctrl_driver); 1132 1133 MODULE_LICENSE("GPL"); 1134