xref: /linux/drivers/rtc/rtc-zynqmp.c (revision 6a143a7cf94730f57544ea14a987dc025364dbb8)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
4  *
5  * Copyright (C) 2015 Xilinx, Inc.
6  *
7  */
8 
9 #include <linux/delay.h>
10 #include <linux/init.h>
11 #include <linux/io.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/platform_device.h>
15 #include <linux/rtc.h>
16 
17 /* RTC Registers */
18 #define RTC_SET_TM_WR		0x00
19 #define RTC_SET_TM_RD		0x04
20 #define RTC_CALIB_WR		0x08
21 #define RTC_CALIB_RD		0x0C
22 #define RTC_CUR_TM		0x10
23 #define RTC_CUR_TICK		0x14
24 #define RTC_ALRM		0x18
25 #define RTC_INT_STS		0x20
26 #define RTC_INT_MASK		0x24
27 #define RTC_INT_EN		0x28
28 #define RTC_INT_DIS		0x2C
29 #define RTC_CTRL		0x40
30 
31 #define RTC_FR_EN		BIT(20)
32 #define RTC_FR_DATSHIFT		16
33 #define RTC_TICK_MASK		0xFFFF
34 #define RTC_INT_SEC		BIT(0)
35 #define RTC_INT_ALRM		BIT(1)
36 #define RTC_OSC_EN		BIT(24)
37 #define RTC_BATT_EN		BIT(31)
38 
39 #define RTC_CALIB_DEF		0x198233
40 #define RTC_CALIB_MASK		0x1FFFFF
41 #define RTC_ALRM_MASK          BIT(1)
42 #define RTC_MSEC               1000
43 
44 struct xlnx_rtc_dev {
45 	struct rtc_device	*rtc;
46 	void __iomem		*reg_base;
47 	int			alarm_irq;
48 	int			sec_irq;
49 	unsigned int		calibval;
50 };
51 
52 static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
53 {
54 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
55 	unsigned long new_time;
56 
57 	/*
58 	 * The value written will be updated after 1 sec into the
59 	 * seconds read register, so we need to program time +1 sec
60 	 * to get the correct time on read.
61 	 */
62 	new_time = rtc_tm_to_time64(tm) + 1;
63 
64 	/*
65 	 * Writing into calibration register will clear the Tick Counter and
66 	 * force the next second to be signaled exactly in 1 second period
67 	 */
68 	xrtcdev->calibval &= RTC_CALIB_MASK;
69 	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
70 
71 	writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
72 
73 	/*
74 	 * Clear the rtc interrupt status register after setting the
75 	 * time. During a read_time function, the code should read the
76 	 * RTC_INT_STATUS register and if bit 0 is still 0, it means
77 	 * that one second has not elapsed yet since RTC was set and
78 	 * the current time should be read from SET_TIME_READ register;
79 	 * otherwise, CURRENT_TIME register is read to report the time
80 	 */
81 	writel(RTC_INT_SEC, xrtcdev->reg_base + RTC_INT_STS);
82 
83 	return 0;
84 }
85 
86 static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
87 {
88 	u32 status;
89 	unsigned long read_time;
90 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
91 
92 	status = readl(xrtcdev->reg_base + RTC_INT_STS);
93 
94 	if (status & RTC_INT_SEC) {
95 		/*
96 		 * RTC has updated the CURRENT_TIME with the time written into
97 		 * SET_TIME_WRITE register.
98 		 */
99 		read_time = readl(xrtcdev->reg_base + RTC_CUR_TM);
100 	} else {
101 		/*
102 		 * Time written in SET_TIME_WRITE has not yet updated into
103 		 * the seconds read register, so read the time from the
104 		 * SET_TIME_WRITE instead of CURRENT_TIME register.
105 		 * Since we add +1 sec while writing, we need to -1 sec while
106 		 * reading.
107 		 */
108 		read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
109 	}
110 	rtc_time64_to_tm(read_time, tm);
111 
112 	return 0;
113 }
114 
115 static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
116 {
117 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
118 
119 	rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
120 	alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;
121 
122 	return 0;
123 }
124 
125 static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
126 {
127 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
128 	unsigned int status;
129 	ulong timeout;
130 
131 	timeout = jiffies + msecs_to_jiffies(RTC_MSEC);
132 
133 	if (enabled) {
134 		while (1) {
135 			status = readl(xrtcdev->reg_base + RTC_INT_STS);
136 			if (!((status & RTC_ALRM_MASK) == RTC_ALRM_MASK))
137 				break;
138 
139 			if (time_after_eq(jiffies, timeout)) {
140 				dev_err(dev, "Time out occur, while clearing alarm status bit\n");
141 				return -ETIMEDOUT;
142 			}
143 			writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);
144 		}
145 
146 		writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
147 	} else {
148 		writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
149 	}
150 
151 	return 0;
152 }
153 
154 static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
155 {
156 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
157 	unsigned long alarm_time;
158 
159 	alarm_time = rtc_tm_to_time64(&alrm->time);
160 
161 	writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));
162 
163 	xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);
164 
165 	return 0;
166 }
167 
168 static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
169 {
170 	u32 rtc_ctrl;
171 
172 	/* Enable RTC switch to battery when VCC_PSAUX is not available */
173 	rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
174 	rtc_ctrl |= RTC_BATT_EN;
175 	writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
176 
177 	/*
178 	 * Based on crystal freq of 33.330 KHz
179 	 * set the seconds counter and enable, set fractions counter
180 	 * to default value suggested as per design spec
181 	 * to correct RTC delay in frequency over period of time.
182 	 */
183 	xrtcdev->calibval &= RTC_CALIB_MASK;
184 	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
185 }
186 
187 static const struct rtc_class_ops xlnx_rtc_ops = {
188 	.set_time	  = xlnx_rtc_set_time,
189 	.read_time	  = xlnx_rtc_read_time,
190 	.read_alarm	  = xlnx_rtc_read_alarm,
191 	.set_alarm	  = xlnx_rtc_set_alarm,
192 	.alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
193 };
194 
195 static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
196 {
197 	struct xlnx_rtc_dev *xrtcdev = (struct xlnx_rtc_dev *)id;
198 	unsigned int status;
199 
200 	status = readl(xrtcdev->reg_base + RTC_INT_STS);
201 	/* Check if interrupt asserted */
202 	if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
203 		return IRQ_NONE;
204 
205 	/* Disable RTC_INT_ALRM interrupt only */
206 	writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
207 
208 	if (status & RTC_INT_ALRM)
209 		rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);
210 
211 	return IRQ_HANDLED;
212 }
213 
214 static int xlnx_rtc_probe(struct platform_device *pdev)
215 {
216 	struct xlnx_rtc_dev *xrtcdev;
217 	int ret;
218 
219 	xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
220 	if (!xrtcdev)
221 		return -ENOMEM;
222 
223 	platform_set_drvdata(pdev, xrtcdev);
224 
225 	xrtcdev->rtc = devm_rtc_allocate_device(&pdev->dev);
226 	if (IS_ERR(xrtcdev->rtc))
227 		return PTR_ERR(xrtcdev->rtc);
228 
229 	xrtcdev->rtc->ops = &xlnx_rtc_ops;
230 	xrtcdev->rtc->range_max = U32_MAX;
231 
232 	xrtcdev->reg_base = devm_platform_ioremap_resource(pdev, 0);
233 	if (IS_ERR(xrtcdev->reg_base))
234 		return PTR_ERR(xrtcdev->reg_base);
235 
236 	xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
237 	if (xrtcdev->alarm_irq < 0)
238 		return xrtcdev->alarm_irq;
239 	ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
240 			       xlnx_rtc_interrupt, 0,
241 			       dev_name(&pdev->dev), xrtcdev);
242 	if (ret) {
243 		dev_err(&pdev->dev, "request irq failed\n");
244 		return ret;
245 	}
246 
247 	xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
248 	if (xrtcdev->sec_irq < 0)
249 		return xrtcdev->sec_irq;
250 	ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
251 			       xlnx_rtc_interrupt, 0,
252 			       dev_name(&pdev->dev), xrtcdev);
253 	if (ret) {
254 		dev_err(&pdev->dev, "request irq failed\n");
255 		return ret;
256 	}
257 
258 	ret = of_property_read_u32(pdev->dev.of_node, "calibration",
259 				   &xrtcdev->calibval);
260 	if (ret)
261 		xrtcdev->calibval = RTC_CALIB_DEF;
262 
263 	xlnx_init_rtc(xrtcdev);
264 
265 	device_init_wakeup(&pdev->dev, 1);
266 
267 	return devm_rtc_register_device(xrtcdev->rtc);
268 }
269 
270 static int xlnx_rtc_remove(struct platform_device *pdev)
271 {
272 	xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
273 	device_init_wakeup(&pdev->dev, 0);
274 
275 	return 0;
276 }
277 
278 static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
279 {
280 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
281 
282 	if (device_may_wakeup(dev))
283 		enable_irq_wake(xrtcdev->alarm_irq);
284 	else
285 		xlnx_rtc_alarm_irq_enable(dev, 0);
286 
287 	return 0;
288 }
289 
290 static int __maybe_unused xlnx_rtc_resume(struct device *dev)
291 {
292 	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
293 
294 	if (device_may_wakeup(dev))
295 		disable_irq_wake(xrtcdev->alarm_irq);
296 	else
297 		xlnx_rtc_alarm_irq_enable(dev, 1);
298 
299 	return 0;
300 }
301 
302 static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);
303 
304 static const struct of_device_id xlnx_rtc_of_match[] = {
305 	{.compatible = "xlnx,zynqmp-rtc" },
306 	{ }
307 };
308 MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);
309 
310 static struct platform_driver xlnx_rtc_driver = {
311 	.probe		= xlnx_rtc_probe,
312 	.remove		= xlnx_rtc_remove,
313 	.driver		= {
314 		.name	= KBUILD_MODNAME,
315 		.pm	= &xlnx_rtc_pm_ops,
316 		.of_match_table	= xlnx_rtc_of_match,
317 	},
318 };
319 
320 module_platform_driver(xlnx_rtc_driver);
321 
322 MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
323 MODULE_AUTHOR("Xilinx Inc.");
324 MODULE_LICENSE("GPL v2");
325