1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * An i2c driver for the Xicor/Intersil X1205 RTC
4 * Copyright 2004 Karen Spearel
5 * Copyright 2005 Alessandro Zummo
6 *
7 * please send all reports to:
8 * Karen Spearel <kas111 at gmail dot com>
9 * Alessandro Zummo <a.zummo@towertech.it>
10 *
11 * based on a lot of other RTC drivers.
12 *
13 * Information and datasheet:
14 * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
15 */
16
17 #include <linux/i2c.h>
18 #include <linux/bcd.h>
19 #include <linux/rtc.h>
20 #include <linux/delay.h>
21 #include <linux/module.h>
22 #include <linux/bitops.h>
23
24 /* offsets into CCR area */
25
26 #define CCR_SEC 0
27 #define CCR_MIN 1
28 #define CCR_HOUR 2
29 #define CCR_MDAY 3
30 #define CCR_MONTH 4
31 #define CCR_YEAR 5
32 #define CCR_WDAY 6
33 #define CCR_Y2K 7
34
35 #define X1205_REG_SR 0x3F /* status register */
36 #define X1205_REG_Y2K 0x37
37 #define X1205_REG_DW 0x36
38 #define X1205_REG_YR 0x35
39 #define X1205_REG_MO 0x34
40 #define X1205_REG_DT 0x33
41 #define X1205_REG_HR 0x32
42 #define X1205_REG_MN 0x31
43 #define X1205_REG_SC 0x30
44 #define X1205_REG_DTR 0x13
45 #define X1205_REG_ATR 0x12
46 #define X1205_REG_INT 0x11
47 #define X1205_REG_0 0x10
48 #define X1205_REG_Y2K1 0x0F
49 #define X1205_REG_DWA1 0x0E
50 #define X1205_REG_YRA1 0x0D
51 #define X1205_REG_MOA1 0x0C
52 #define X1205_REG_DTA1 0x0B
53 #define X1205_REG_HRA1 0x0A
54 #define X1205_REG_MNA1 0x09
55 #define X1205_REG_SCA1 0x08
56 #define X1205_REG_Y2K0 0x07
57 #define X1205_REG_DWA0 0x06
58 #define X1205_REG_YRA0 0x05
59 #define X1205_REG_MOA0 0x04
60 #define X1205_REG_DTA0 0x03
61 #define X1205_REG_HRA0 0x02
62 #define X1205_REG_MNA0 0x01
63 #define X1205_REG_SCA0 0x00
64
65 #define X1205_CCR_BASE 0x30 /* Base address of CCR */
66 #define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
67
68 #define X1205_SR_RTCF 0x01 /* Clock failure */
69 #define X1205_SR_WEL 0x02 /* Write Enable Latch */
70 #define X1205_SR_RWEL 0x04 /* Register Write Enable */
71 #define X1205_SR_AL0 0x20 /* Alarm 0 match */
72
73 #define X1205_DTR_DTR0 0x01
74 #define X1205_DTR_DTR1 0x02
75 #define X1205_DTR_DTR2 0x04
76
77 #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
78
79 #define X1205_INT_AL0E 0x20 /* Alarm 0 enable */
80
81 static struct i2c_driver x1205_driver;
82
83 /*
84 * In the routines that deal directly with the x1205 hardware, we use
85 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
86 * Epoch is initialized as 2000. Time is set to UTC.
87 */
x1205_get_datetime(struct i2c_client * client,struct rtc_time * tm,unsigned char reg_base)88 static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
89 unsigned char reg_base)
90 {
91 unsigned char dt_addr[2] = { 0, reg_base };
92 unsigned char buf[8];
93 int i;
94
95 struct i2c_msg msgs[] = {
96 {/* setup read ptr */
97 .addr = client->addr,
98 .len = 2,
99 .buf = dt_addr
100 },
101 {/* read date */
102 .addr = client->addr,
103 .flags = I2C_M_RD,
104 .len = 8,
105 .buf = buf
106 },
107 };
108
109 /* read date registers */
110 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
111 dev_err(&client->dev, "%s: read error\n", __func__);
112 return -EIO;
113 }
114
115 dev_dbg(&client->dev,
116 "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
117 "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
118 __func__,
119 buf[0], buf[1], buf[2], buf[3],
120 buf[4], buf[5], buf[6], buf[7]);
121
122 /* Mask out the enable bits if these are alarm registers */
123 if (reg_base < X1205_CCR_BASE)
124 for (i = 0; i <= 4; i++)
125 buf[i] &= 0x7F;
126
127 tm->tm_sec = bcd2bin(buf[CCR_SEC]);
128 tm->tm_min = bcd2bin(buf[CCR_MIN]);
129 tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
130 tm->tm_mday = bcd2bin(buf[CCR_MDAY]);
131 tm->tm_mon = bcd2bin(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
132 tm->tm_year = bcd2bin(buf[CCR_YEAR])
133 + (bcd2bin(buf[CCR_Y2K]) * 100) - 1900;
134 tm->tm_wday = buf[CCR_WDAY];
135
136 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
137 "mday=%d, mon=%d, year=%d, wday=%d\n",
138 __func__,
139 tm->tm_sec, tm->tm_min, tm->tm_hour,
140 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
141
142 return 0;
143 }
144
x1205_get_status(struct i2c_client * client,unsigned char * sr)145 static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
146 {
147 static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
148
149 struct i2c_msg msgs[] = {
150 { /* setup read ptr */
151 .addr = client->addr,
152 .len = 2,
153 .buf = sr_addr
154 },
155 { /* read status */
156 .addr = client->addr,
157 .flags = I2C_M_RD,
158 .len = 1,
159 .buf = sr
160 },
161 };
162
163 /* read status register */
164 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
165 dev_err(&client->dev, "%s: read error\n", __func__);
166 return -EIO;
167 }
168
169 return 0;
170 }
171
x1205_set_datetime(struct i2c_client * client,struct rtc_time * tm,u8 reg_base,unsigned char alm_enable)172 static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
173 u8 reg_base, unsigned char alm_enable)
174 {
175 int i, xfer;
176 unsigned char rdata[10] = { 0, reg_base };
177 unsigned char *buf = rdata + 2;
178
179 static const unsigned char wel[3] = { 0, X1205_REG_SR,
180 X1205_SR_WEL };
181
182 static const unsigned char rwel[3] = { 0, X1205_REG_SR,
183 X1205_SR_WEL | X1205_SR_RWEL };
184
185 static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
186
187 dev_dbg(&client->dev,
188 "%s: sec=%d min=%d hour=%d mday=%d mon=%d year=%d wday=%d\n",
189 __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday,
190 tm->tm_mon, tm->tm_year, tm->tm_wday);
191
192 buf[CCR_SEC] = bin2bcd(tm->tm_sec);
193 buf[CCR_MIN] = bin2bcd(tm->tm_min);
194
195 /* set hour and 24hr bit */
196 buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL;
197
198 buf[CCR_MDAY] = bin2bcd(tm->tm_mday);
199
200 /* month, 1 - 12 */
201 buf[CCR_MONTH] = bin2bcd(tm->tm_mon + 1);
202
203 /* year, since the rtc epoch*/
204 buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100);
205 buf[CCR_WDAY] = tm->tm_wday & 0x07;
206 buf[CCR_Y2K] = bin2bcd((tm->tm_year + 1900) / 100);
207
208 /* If writing alarm registers, set compare bits on registers 0-4 */
209 if (reg_base < X1205_CCR_BASE)
210 for (i = 0; i <= 4; i++)
211 buf[i] |= 0x80;
212
213 /* this sequence is required to unlock the chip */
214 xfer = i2c_master_send(client, wel, 3);
215 if (xfer != 3) {
216 dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
217 return -EIO;
218 }
219
220 xfer = i2c_master_send(client, rwel, 3);
221 if (xfer != 3) {
222 dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
223 return -EIO;
224 }
225
226 xfer = i2c_master_send(client, rdata, sizeof(rdata));
227 if (xfer != sizeof(rdata)) {
228 dev_err(&client->dev,
229 "%s: result=%d addr=%02x, data=%02x\n",
230 __func__,
231 xfer, rdata[1], rdata[2]);
232 return -EIO;
233 }
234
235 /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
236 if (reg_base < X1205_CCR_BASE) {
237 unsigned char al0e[3] = { 0, X1205_REG_INT, 0 };
238
239 msleep(10);
240
241 /* ...and set or clear the AL0E bit in the INT register */
242
243 /* Need to set RWEL again as the write has cleared it */
244 xfer = i2c_master_send(client, rwel, 3);
245 if (xfer != 3) {
246 dev_err(&client->dev,
247 "%s: aloe rwel - %d\n",
248 __func__,
249 xfer);
250 return -EIO;
251 }
252
253 if (alm_enable)
254 al0e[2] = X1205_INT_AL0E;
255
256 xfer = i2c_master_send(client, al0e, 3);
257 if (xfer != 3) {
258 dev_err(&client->dev,
259 "%s: al0e - %d\n",
260 __func__,
261 xfer);
262 return -EIO;
263 }
264
265 /* and wait 10msec again for this write to complete */
266 msleep(10);
267 }
268
269 /* disable further writes */
270 xfer = i2c_master_send(client, diswe, 3);
271 if (xfer != 3) {
272 dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
273 return -EIO;
274 }
275
276 return 0;
277 }
278
x1205_fix_osc(struct i2c_client * client)279 static int x1205_fix_osc(struct i2c_client *client)
280 {
281 int err;
282 struct rtc_time tm;
283
284 memset(&tm, 0, sizeof(tm));
285
286 err = x1205_set_datetime(client, &tm, X1205_CCR_BASE, 0);
287 if (err < 0)
288 dev_err(&client->dev, "unable to restart the oscillator\n");
289
290 return err;
291 }
292
x1205_get_dtrim(struct i2c_client * client,int * trim)293 static int x1205_get_dtrim(struct i2c_client *client, int *trim)
294 {
295 unsigned char dtr;
296 static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
297
298 struct i2c_msg msgs[] = {
299 { /* setup read ptr */
300 .addr = client->addr,
301 .len = 2,
302 .buf = dtr_addr
303 },
304 { /* read dtr */
305 .addr = client->addr,
306 .flags = I2C_M_RD,
307 .len = 1,
308 .buf = &dtr
309 },
310 };
311
312 /* read dtr register */
313 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
314 dev_err(&client->dev, "%s: read error\n", __func__);
315 return -EIO;
316 }
317
318 dev_dbg(&client->dev, "%s: raw dtr=%x\n", __func__, dtr);
319
320 *trim = 0;
321
322 if (dtr & X1205_DTR_DTR0)
323 *trim += 20;
324
325 if (dtr & X1205_DTR_DTR1)
326 *trim += 10;
327
328 if (dtr & X1205_DTR_DTR2)
329 *trim = -*trim;
330
331 return 0;
332 }
333
x1205_get_atrim(struct i2c_client * client,int * trim)334 static int x1205_get_atrim(struct i2c_client *client, int *trim)
335 {
336 s8 atr;
337 static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
338
339 struct i2c_msg msgs[] = {
340 {/* setup read ptr */
341 .addr = client->addr,
342 .len = 2,
343 .buf = atr_addr
344 },
345 {/* read atr */
346 .addr = client->addr,
347 .flags = I2C_M_RD,
348 .len = 1,
349 .buf = &atr
350 },
351 };
352
353 /* read atr register */
354 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
355 dev_err(&client->dev, "%s: read error\n", __func__);
356 return -EIO;
357 }
358
359 dev_dbg(&client->dev, "%s: raw atr=%x\n", __func__, atr);
360
361 /* atr is a two's complement value on 6 bits,
362 * perform sign extension. The formula is
363 * Catr = (atr * 0.25pF) + 11.00pF.
364 */
365 atr = sign_extend32(atr, 5);
366
367 dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __func__, atr, atr);
368
369 *trim = (atr * 250) + 11000;
370
371 dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim);
372
373 return 0;
374 }
375
376 struct x1205_limit {
377 unsigned char reg, mask, min, max;
378 };
379
x1205_validate_client(struct i2c_client * client)380 static int x1205_validate_client(struct i2c_client *client)
381 {
382 int i, xfer;
383
384 /* Probe array. We will read the register at the specified
385 * address and check if the given bits are zero.
386 */
387 static const unsigned char probe_zero_pattern[] = {
388 /* register, mask */
389 X1205_REG_SR, 0x18,
390 X1205_REG_DTR, 0xF8,
391 X1205_REG_ATR, 0xC0,
392 X1205_REG_INT, 0x18,
393 X1205_REG_0, 0xFF,
394 };
395
396 static const struct x1205_limit probe_limits_pattern[] = {
397 /* register, mask, min, max */
398 { X1205_REG_Y2K, 0xFF, 19, 20 },
399 { X1205_REG_DW, 0xFF, 0, 6 },
400 { X1205_REG_YR, 0xFF, 0, 99 },
401 { X1205_REG_MO, 0xFF, 0, 12 },
402 { X1205_REG_DT, 0xFF, 0, 31 },
403 { X1205_REG_HR, 0x7F, 0, 23 },
404 { X1205_REG_MN, 0xFF, 0, 59 },
405 { X1205_REG_SC, 0xFF, 0, 59 },
406 { X1205_REG_Y2K1, 0xFF, 19, 20 },
407 { X1205_REG_Y2K0, 0xFF, 19, 20 },
408 };
409
410 /* check that registers have bits a 0 where expected */
411 for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
412 unsigned char buf;
413
414 unsigned char addr[2] = { 0, probe_zero_pattern[i] };
415
416 struct i2c_msg msgs[2] = {
417 {
418 .addr = client->addr,
419 .len = 2,
420 .buf = addr
421 },
422 {
423 .addr = client->addr,
424 .flags = I2C_M_RD,
425 .len = 1,
426 .buf = &buf
427 },
428 };
429
430 xfer = i2c_transfer(client->adapter, msgs, 2);
431 if (xfer != 2) {
432 dev_err(&client->dev,
433 "%s: could not read register %x\n",
434 __func__, probe_zero_pattern[i]);
435
436 return -EIO;
437 }
438
439 if ((buf & probe_zero_pattern[i+1]) != 0) {
440 dev_err(&client->dev,
441 "%s: register=%02x, zero pattern=%d, value=%x\n",
442 __func__, probe_zero_pattern[i], i, buf);
443
444 return -ENODEV;
445 }
446 }
447
448 /* check limits (only registers with bcd values) */
449 for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
450 unsigned char reg, value;
451
452 unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
453
454 struct i2c_msg msgs[2] = {
455 {
456 .addr = client->addr,
457 .len = 2,
458 .buf = addr
459 },
460 {
461 .addr = client->addr,
462 .flags = I2C_M_RD,
463 .len = 1,
464 .buf = ®
465 },
466 };
467
468 xfer = i2c_transfer(client->adapter, msgs, 2);
469 if (xfer != 2) {
470 dev_err(&client->dev,
471 "%s: could not read register %x\n",
472 __func__, probe_limits_pattern[i].reg);
473
474 return -EIO;
475 }
476
477 value = bcd2bin(reg & probe_limits_pattern[i].mask);
478
479 if (value > probe_limits_pattern[i].max ||
480 value < probe_limits_pattern[i].min) {
481 dev_dbg(&client->dev,
482 "%s: register=%x, lim pattern=%d, value=%d\n",
483 __func__, probe_limits_pattern[i].reg,
484 i, value);
485
486 return -ENODEV;
487 }
488 }
489
490 return 0;
491 }
492
x1205_rtc_read_alarm(struct device * dev,struct rtc_wkalrm * alrm)493 static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
494 {
495 int err;
496 unsigned char intreg, status;
497 static unsigned char int_addr[2] = { 0, X1205_REG_INT };
498 struct i2c_client *client = to_i2c_client(dev);
499 struct i2c_msg msgs[] = {
500 { /* setup read ptr */
501 .addr = client->addr,
502 .len = 2,
503 .buf = int_addr
504 },
505 {/* read INT register */
506
507 .addr = client->addr,
508 .flags = I2C_M_RD,
509 .len = 1,
510 .buf = &intreg
511 },
512 };
513
514 /* read interrupt register and status register */
515 if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
516 dev_err(&client->dev, "%s: read error\n", __func__);
517 return -EIO;
518 }
519 err = x1205_get_status(client, &status);
520 if (err == 0) {
521 alrm->pending = (status & X1205_SR_AL0) ? 1 : 0;
522 alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0;
523 err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE);
524 }
525 return err;
526 }
527
x1205_rtc_set_alarm(struct device * dev,struct rtc_wkalrm * alrm)528 static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
529 {
530 return x1205_set_datetime(to_i2c_client(dev),
531 &alrm->time, X1205_ALM0_BASE, alrm->enabled);
532 }
533
x1205_rtc_read_time(struct device * dev,struct rtc_time * tm)534 static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
535 {
536 return x1205_get_datetime(to_i2c_client(dev),
537 tm, X1205_CCR_BASE);
538 }
539
x1205_rtc_set_time(struct device * dev,struct rtc_time * tm)540 static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
541 {
542 return x1205_set_datetime(to_i2c_client(dev),
543 tm, X1205_CCR_BASE, 0);
544 }
545
x1205_rtc_proc(struct device * dev,struct seq_file * seq)546 static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
547 {
548 int err, dtrim, atrim;
549
550 err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
551 if (!err)
552 seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
553
554 err = x1205_get_atrim(to_i2c_client(dev), &atrim);
555 if (!err)
556 seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
557 atrim / 1000, atrim % 1000);
558 return 0;
559 }
560
561 static const struct rtc_class_ops x1205_rtc_ops = {
562 .proc = x1205_rtc_proc,
563 .read_time = x1205_rtc_read_time,
564 .set_time = x1205_rtc_set_time,
565 .read_alarm = x1205_rtc_read_alarm,
566 .set_alarm = x1205_rtc_set_alarm,
567 };
568
x1205_sysfs_show_atrim(struct device * dev,struct device_attribute * attr,char * buf)569 static ssize_t x1205_sysfs_show_atrim(struct device *dev,
570 struct device_attribute *attr, char *buf)
571 {
572 int err, atrim;
573
574 err = x1205_get_atrim(to_i2c_client(dev), &atrim);
575 if (err)
576 return err;
577
578 return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
579 }
580 static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
581
x1205_sysfs_show_dtrim(struct device * dev,struct device_attribute * attr,char * buf)582 static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
583 struct device_attribute *attr, char *buf)
584 {
585 int err, dtrim;
586
587 err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
588 if (err)
589 return err;
590
591 return sprintf(buf, "%d ppm\n", dtrim);
592 }
593 static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
594
x1205_sysfs_register(struct device * dev)595 static int x1205_sysfs_register(struct device *dev)
596 {
597 int err;
598
599 err = device_create_file(dev, &dev_attr_atrim);
600 if (err)
601 return err;
602
603 err = device_create_file(dev, &dev_attr_dtrim);
604 if (err)
605 device_remove_file(dev, &dev_attr_atrim);
606
607 return err;
608 }
609
x1205_sysfs_unregister(struct device * dev)610 static void x1205_sysfs_unregister(struct device *dev)
611 {
612 device_remove_file(dev, &dev_attr_atrim);
613 device_remove_file(dev, &dev_attr_dtrim);
614 }
615
616
x1205_probe(struct i2c_client * client)617 static int x1205_probe(struct i2c_client *client)
618 {
619 int err = 0;
620 unsigned char sr;
621 struct rtc_device *rtc;
622
623 dev_dbg(&client->dev, "%s\n", __func__);
624
625 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
626 return -ENODEV;
627
628 if (x1205_validate_client(client) < 0)
629 return -ENODEV;
630
631 rtc = devm_rtc_device_register(&client->dev, x1205_driver.driver.name,
632 &x1205_rtc_ops, THIS_MODULE);
633
634 if (IS_ERR(rtc))
635 return PTR_ERR(rtc);
636
637 i2c_set_clientdata(client, rtc);
638
639 /* Check for power failures and eventually enable the osc */
640 err = x1205_get_status(client, &sr);
641 if (!err) {
642 if (sr & X1205_SR_RTCF) {
643 dev_err(&client->dev,
644 "power failure detected, "
645 "please set the clock\n");
646 udelay(50);
647 x1205_fix_osc(client);
648 }
649 } else {
650 dev_err(&client->dev, "couldn't read status\n");
651 }
652
653 err = x1205_sysfs_register(&client->dev);
654 if (err)
655 dev_err(&client->dev, "Unable to create sysfs entries\n");
656
657 return 0;
658 }
659
x1205_remove(struct i2c_client * client)660 static void x1205_remove(struct i2c_client *client)
661 {
662 x1205_sysfs_unregister(&client->dev);
663 }
664
665 static const struct i2c_device_id x1205_id[] = {
666 { "x1205" },
667 { }
668 };
669 MODULE_DEVICE_TABLE(i2c, x1205_id);
670
671 static const struct of_device_id x1205_dt_ids[] = {
672 { .compatible = "xircom,x1205", },
673 {},
674 };
675 MODULE_DEVICE_TABLE(of, x1205_dt_ids);
676
677 static struct i2c_driver x1205_driver = {
678 .driver = {
679 .name = "rtc-x1205",
680 .of_match_table = x1205_dt_ids,
681 },
682 .probe = x1205_probe,
683 .remove = x1205_remove,
684 .id_table = x1205_id,
685 };
686
687 module_i2c_driver(x1205_driver);
688
689 MODULE_AUTHOR(
690 "Karen Spearel <kas111 at gmail dot com>, "
691 "Alessandro Zummo <a.zummo@towertech.it>");
692 MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
693 MODULE_LICENSE("GPL");
694