1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Texas Instruments K3 RTC driver 4 * 5 * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/ 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/delay.h> 10 #include <linux/mod_devicetable.h> 11 #include <linux/module.h> 12 #include <linux/of.h> 13 #include <linux/platform_device.h> 14 #include <linux/sys_soc.h> 15 #include <linux/property.h> 16 #include <linux/regmap.h> 17 #include <linux/rtc.h> 18 19 /* Registers */ 20 #define REG_K3RTC_S_CNT_LSW 0x08 21 #define REG_K3RTC_S_CNT_MSW 0x0c 22 #define REG_K3RTC_COMP 0x10 23 #define REG_K3RTC_ON_OFF_S_CNT_LSW 0x20 24 #define REG_K3RTC_ON_OFF_S_CNT_MSW 0x24 25 #define REG_K3RTC_SCRATCH0 0x30 26 #define REG_K3RTC_SCRATCH7 0x4c 27 #define REG_K3RTC_GENERAL_CTL 0x50 28 #define REG_K3RTC_IRQSTATUS_RAW_SYS 0x54 29 #define REG_K3RTC_IRQSTATUS_SYS 0x58 30 #define REG_K3RTC_IRQENABLE_SET_SYS 0x5c 31 #define REG_K3RTC_IRQENABLE_CLR_SYS 0x60 32 #define REG_K3RTC_SYNCPEND 0x68 33 #define REG_K3RTC_KICK0 0x70 34 #define REG_K3RTC_KICK1 0x74 35 36 /* Freeze when lsw is read and unfreeze when msw is read */ 37 #define K3RTC_CNT_FMODE_S_CNT_VALUE (0x2 << 24) 38 39 /* Magic values for lock/unlock */ 40 #define K3RTC_KICK0_UNLOCK_VALUE 0x83e70b13 41 #define K3RTC_KICK1_UNLOCK_VALUE 0x95a4f1e0 42 43 /* Multiplier for ppb conversions */ 44 #define K3RTC_PPB_MULT (1000000000LL) 45 /* Min and max values supported with 'offset' interface (swapped sign) */ 46 #define K3RTC_MIN_OFFSET (-277761) 47 #define K3RTC_MAX_OFFSET (277778) 48 49 static const struct regmap_config ti_k3_rtc_regmap_config = { 50 .name = "peripheral-registers", 51 .reg_bits = 32, 52 .val_bits = 32, 53 .reg_stride = 4, 54 .max_register = REG_K3RTC_KICK1, 55 }; 56 57 enum ti_k3_rtc_fields { 58 K3RTC_KICK0, 59 K3RTC_KICK1, 60 K3RTC_S_CNT_LSW, 61 K3RTC_S_CNT_MSW, 62 K3RTC_O32K_OSC_DEP_EN, 63 K3RTC_UNLOCK, 64 K3RTC_CNT_FMODE, 65 K3RTC_PEND, 66 K3RTC_RELOAD_FROM_BBD, 67 K3RTC_COMP, 68 69 K3RTC_ALM_S_CNT_LSW, 70 K3RTC_ALM_S_CNT_MSW, 71 K3RTC_IRQ_STATUS_RAW, 72 K3RTC_IRQ_STATUS, 73 K3RTC_IRQ_ENABLE_SET, 74 K3RTC_IRQ_ENABLE_CLR, 75 76 K3RTC_IRQ_STATUS_ALT, 77 K3RTC_IRQ_ENABLE_CLR_ALT, 78 79 K3_RTC_MAX_FIELDS 80 }; 81 82 static const struct reg_field ti_rtc_reg_fields[] = { 83 [K3RTC_KICK0] = REG_FIELD(REG_K3RTC_KICK0, 0, 31), 84 [K3RTC_KICK1] = REG_FIELD(REG_K3RTC_KICK1, 0, 31), 85 [K3RTC_S_CNT_LSW] = REG_FIELD(REG_K3RTC_S_CNT_LSW, 0, 31), 86 [K3RTC_S_CNT_MSW] = REG_FIELD(REG_K3RTC_S_CNT_MSW, 0, 15), 87 [K3RTC_O32K_OSC_DEP_EN] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 21, 21), 88 [K3RTC_UNLOCK] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 23, 23), 89 [K3RTC_CNT_FMODE] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 24, 25), 90 [K3RTC_PEND] = REG_FIELD(REG_K3RTC_SYNCPEND, 0, 1), 91 [K3RTC_RELOAD_FROM_BBD] = REG_FIELD(REG_K3RTC_SYNCPEND, 31, 31), 92 [K3RTC_COMP] = REG_FIELD(REG_K3RTC_COMP, 0, 31), 93 94 /* We use on to off as alarm trigger */ 95 [K3RTC_ALM_S_CNT_LSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_LSW, 0, 31), 96 [K3RTC_ALM_S_CNT_MSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_MSW, 0, 15), 97 [K3RTC_IRQ_STATUS_RAW] = REG_FIELD(REG_K3RTC_IRQSTATUS_RAW_SYS, 0, 0), 98 [K3RTC_IRQ_STATUS] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 0, 0), 99 [K3RTC_IRQ_ENABLE_SET] = REG_FIELD(REG_K3RTC_IRQENABLE_SET_SYS, 0, 0), 100 [K3RTC_IRQ_ENABLE_CLR] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 0, 0), 101 /* Off to on is alternate */ 102 [K3RTC_IRQ_STATUS_ALT] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 1, 1), 103 [K3RTC_IRQ_ENABLE_CLR_ALT] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 1, 1), 104 }; 105 106 /** 107 * struct ti_k3_rtc - Private data for ti-k3-rtc 108 * @irq: IRQ 109 * @sync_timeout_us: data sync timeout period in uSec 110 * @rate_32k: 32k clock rate in Hz 111 * @rtc_dev: rtc device 112 * @regmap: rtc mmio regmap 113 * @r_fields: rtc register fields 114 */ 115 struct ti_k3_rtc { 116 unsigned int irq; 117 u32 sync_timeout_us; 118 unsigned long rate_32k; 119 struct rtc_device *rtc_dev; 120 struct regmap *regmap; 121 struct regmap_field *r_fields[K3_RTC_MAX_FIELDS]; 122 }; 123 124 static int k3rtc_field_read(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f) 125 { 126 int ret; 127 int val; 128 129 ret = regmap_field_read(priv->r_fields[f], &val); 130 /* 131 * We shouldn't be seeing regmap fail on us for mmio reads 132 * This is possible if clock context fails, but that isn't the case for us 133 */ 134 if (WARN_ON_ONCE(ret)) 135 return ret; 136 return val; 137 } 138 139 static void k3rtc_field_write(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f, u32 val) 140 { 141 regmap_field_write(priv->r_fields[f], val); 142 } 143 144 /** 145 * k3rtc_fence - Ensure a register sync took place between the two domains 146 * @priv: pointer to priv data 147 * 148 * Return: 0 if the sync took place, else returns -ETIMEDOUT 149 */ 150 static int k3rtc_fence(struct ti_k3_rtc *priv) 151 { 152 int ret; 153 154 ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_PEND], ret, 155 !ret, 2, priv->sync_timeout_us); 156 157 return ret; 158 } 159 160 static inline int k3rtc_check_unlocked(struct ti_k3_rtc *priv) 161 { 162 int ret; 163 164 ret = k3rtc_field_read(priv, K3RTC_UNLOCK); 165 if (ret < 0) 166 return ret; 167 168 return (ret) ? 0 : 1; 169 } 170 171 static int k3rtc_unlock_rtc(struct ti_k3_rtc *priv) 172 { 173 int ret; 174 175 ret = k3rtc_check_unlocked(priv); 176 if (!ret) 177 return ret; 178 179 k3rtc_field_write(priv, K3RTC_KICK0, K3RTC_KICK0_UNLOCK_VALUE); 180 k3rtc_field_write(priv, K3RTC_KICK1, K3RTC_KICK1_UNLOCK_VALUE); 181 182 /* Skip fence since we are going to check the unlock bit as fence */ 183 ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_UNLOCK], ret, 184 ret, 2, priv->sync_timeout_us); 185 186 return ret; 187 } 188 189 /* 190 * This is the list of SoCs affected by TI's i2327 errata causing the RTC 191 * state-machine to break if not unlocked fast enough during boot. These 192 * SoCs must have the bootloader unlock this device very early in the 193 * boot-flow before we (Linux) can use this device. 194 */ 195 static const struct soc_device_attribute has_erratum_i2327[] = { 196 { .family = "AM62X", .revision = "SR1.0" }, 197 { /* sentinel */ } 198 }; 199 200 static int k3rtc_configure(struct device *dev) 201 { 202 int ret; 203 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 204 205 /* 206 * HWBUG: The compare state machine is broken if the RTC module 207 * is NOT unlocked in under one second of boot - which is pretty long 208 * time from the perspective of Linux driver (module load, u-boot 209 * shell all can take much longer than this. 210 * 211 * In such occurrence, it is assumed that the RTC module is unusable 212 */ 213 if (soc_device_match(has_erratum_i2327)) { 214 ret = k3rtc_check_unlocked(priv); 215 /* If there is an error OR if we are locked, return error */ 216 if (ret) { 217 dev_err(dev, 218 HW_ERR "Erratum i2327 unlock QUIRK! Cannot operate!!\n"); 219 return -EFAULT; 220 } 221 } else { 222 /* May need to explicitly unlock first time */ 223 ret = k3rtc_unlock_rtc(priv); 224 if (ret) { 225 dev_err(dev, "Failed to unlock(%d)!\n", ret); 226 return ret; 227 } 228 } 229 230 /* Enable Shadow register sync on 32k clock boundary */ 231 k3rtc_field_write(priv, K3RTC_O32K_OSC_DEP_EN, 0x1); 232 233 /* 234 * Wait at least clock sync time before proceeding further programming. 235 * This ensures that the 32k based sync is active. 236 */ 237 usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 5); 238 239 /* We need to ensure fence here to make sure sync here */ 240 ret = k3rtc_fence(priv); 241 if (ret) { 242 dev_err(dev, 243 "Failed fence osc_dep enable(%d) - is 32k clk working?!\n", ret); 244 return ret; 245 } 246 247 /* 248 * FMODE setting: Reading lower seconds will freeze value on higher 249 * seconds. This also implies that we must *ALWAYS* read lower seconds 250 * prior to reading higher seconds 251 */ 252 k3rtc_field_write(priv, K3RTC_CNT_FMODE, K3RTC_CNT_FMODE_S_CNT_VALUE); 253 254 /* Clear any spurious IRQ sources if any */ 255 k3rtc_field_write(priv, K3RTC_IRQ_STATUS_ALT, 0x1); 256 k3rtc_field_write(priv, K3RTC_IRQ_STATUS, 0x1); 257 /* Disable all IRQs */ 258 k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR_ALT, 0x1); 259 k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR, 0x1); 260 261 /* And.. Let us Sync the writes in */ 262 return k3rtc_fence(priv); 263 } 264 265 static int ti_k3_rtc_read_time(struct device *dev, struct rtc_time *tm) 266 { 267 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 268 u32 seconds_lo, seconds_hi; 269 270 seconds_lo = k3rtc_field_read(priv, K3RTC_S_CNT_LSW); 271 seconds_hi = k3rtc_field_read(priv, K3RTC_S_CNT_MSW); 272 273 rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, tm); 274 275 return 0; 276 } 277 278 static int ti_k3_rtc_set_time(struct device *dev, struct rtc_time *tm) 279 { 280 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 281 time64_t seconds; 282 283 seconds = rtc_tm_to_time64(tm); 284 285 /* 286 * Read operation on LSW will freeze the RTC, so to update 287 * the time, we cannot use field operations. Just write since the 288 * reserved bits are ignored. 289 */ 290 regmap_write(priv->regmap, REG_K3RTC_S_CNT_LSW, seconds); 291 regmap_write(priv->regmap, REG_K3RTC_S_CNT_MSW, seconds >> 32); 292 293 return k3rtc_fence(priv); 294 } 295 296 static int ti_k3_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) 297 { 298 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 299 u32 reg; 300 u32 offset = enabled ? K3RTC_IRQ_ENABLE_SET : K3RTC_IRQ_ENABLE_CLR; 301 302 reg = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET); 303 if ((enabled && reg) || (!enabled && !reg)) 304 return 0; 305 306 k3rtc_field_write(priv, offset, 0x1); 307 308 /* 309 * Ensure the write sync is through - NOTE: it should be OK to have 310 * ISR to fire as we are checking sync (which should be done in a 32k 311 * cycle or so). 312 */ 313 return k3rtc_fence(priv); 314 } 315 316 static int ti_k3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) 317 { 318 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 319 u32 seconds_lo, seconds_hi; 320 321 seconds_lo = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_LSW); 322 seconds_hi = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_MSW); 323 324 rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, &alarm->time); 325 326 alarm->enabled = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET); 327 328 return 0; 329 } 330 331 static int ti_k3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) 332 { 333 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 334 time64_t seconds; 335 int ret; 336 337 seconds = rtc_tm_to_time64(&alarm->time); 338 339 k3rtc_field_write(priv, K3RTC_ALM_S_CNT_LSW, seconds); 340 k3rtc_field_write(priv, K3RTC_ALM_S_CNT_MSW, (seconds >> 32)); 341 342 /* Make sure the alarm time is synced in */ 343 ret = k3rtc_fence(priv); 344 if (ret) { 345 dev_err(dev, "Failed to fence(%d)! Potential config issue?\n", ret); 346 return ret; 347 } 348 349 /* Alarm IRQ enable will do a sync */ 350 return ti_k3_rtc_alarm_irq_enable(dev, alarm->enabled); 351 } 352 353 static int ti_k3_rtc_read_offset(struct device *dev, long *offset) 354 { 355 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 356 u32 ticks_per_hr = priv->rate_32k * 3600; 357 int comp; 358 s64 tmp; 359 360 comp = k3rtc_field_read(priv, K3RTC_COMP); 361 362 /* Convert from RTC calibration register format to ppb format */ 363 tmp = comp * (s64)K3RTC_PPB_MULT; 364 if (tmp < 0) 365 tmp -= ticks_per_hr / 2LL; 366 else 367 tmp += ticks_per_hr / 2LL; 368 tmp = div_s64(tmp, ticks_per_hr); 369 370 /* Offset value operates in negative way, so swap sign */ 371 *offset = (long)-tmp; 372 373 return 0; 374 } 375 376 static int ti_k3_rtc_set_offset(struct device *dev, long offset) 377 { 378 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 379 u32 ticks_per_hr = priv->rate_32k * 3600; 380 int comp; 381 s64 tmp; 382 383 /* Make sure offset value is within supported range */ 384 if (offset < K3RTC_MIN_OFFSET || offset > K3RTC_MAX_OFFSET) 385 return -ERANGE; 386 387 /* Convert from ppb format to RTC calibration register format */ 388 tmp = offset * (s64)ticks_per_hr; 389 if (tmp < 0) 390 tmp -= K3RTC_PPB_MULT / 2LL; 391 else 392 tmp += K3RTC_PPB_MULT / 2LL; 393 tmp = div_s64(tmp, K3RTC_PPB_MULT); 394 395 /* Offset value operates in negative way, so swap sign */ 396 comp = (int)-tmp; 397 398 k3rtc_field_write(priv, K3RTC_COMP, comp); 399 400 return k3rtc_fence(priv); 401 } 402 403 static irqreturn_t ti_k3_rtc_interrupt(s32 irq, void *dev_id) 404 { 405 struct device *dev = dev_id; 406 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 407 u32 reg; 408 int ret; 409 410 /* 411 * IRQ assertion can be very fast, however, the IRQ Status clear 412 * de-assert depends on 32k clock edge in the 32k domain 413 * If we clear the status prior to the first 32k clock edge, 414 * the status bit is cleared, but the IRQ stays re-asserted. 415 * 416 * To prevent this condition, we need to wait for clock sync time. 417 * We can either do that by polling the 32k observability signal for 418 * a toggle OR we could just sleep and let the processor do other 419 * stuff. 420 */ 421 usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 2); 422 423 /* Lets make sure that this is a valid interrupt */ 424 reg = k3rtc_field_read(priv, K3RTC_IRQ_STATUS); 425 426 if (!reg) { 427 u32 raw = k3rtc_field_read(priv, K3RTC_IRQ_STATUS_RAW); 428 429 dev_err(dev, 430 HW_ERR 431 "Erratum i2327/IRQ trig: status: 0x%08x / 0x%08x\n", reg, raw); 432 return IRQ_NONE; 433 } 434 435 /* 436 * Write 1 to clear status reg 437 * We cannot use a field operation here due to a potential race between 438 * 32k domain and vbus domain. 439 */ 440 regmap_write(priv->regmap, REG_K3RTC_IRQSTATUS_SYS, 0x1); 441 442 /* Sync the write in */ 443 ret = k3rtc_fence(priv); 444 if (ret) { 445 dev_err(dev, "Failed to fence irq status clr(%d)!\n", ret); 446 return IRQ_NONE; 447 } 448 449 /* 450 * Force the 32k status to be reloaded back in to ensure status is 451 * reflected back correctly. 452 */ 453 k3rtc_field_write(priv, K3RTC_RELOAD_FROM_BBD, 0x1); 454 455 /* Ensure the write sync is through */ 456 ret = k3rtc_fence(priv); 457 if (ret) { 458 dev_err(dev, "Failed to fence reload from bbd(%d)!\n", ret); 459 return IRQ_NONE; 460 } 461 462 /* Now we ensure that the status bit is cleared */ 463 ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_IRQ_STATUS], 464 ret, !ret, 2, priv->sync_timeout_us); 465 if (ret) { 466 dev_err(dev, "Time out waiting for status clear\n"); 467 return IRQ_NONE; 468 } 469 470 /* Notify RTC core on event */ 471 rtc_update_irq(priv->rtc_dev, 1, RTC_IRQF | RTC_AF); 472 473 return IRQ_HANDLED; 474 } 475 476 static const struct rtc_class_ops ti_k3_rtc_ops = { 477 .read_time = ti_k3_rtc_read_time, 478 .set_time = ti_k3_rtc_set_time, 479 .read_alarm = ti_k3_rtc_read_alarm, 480 .set_alarm = ti_k3_rtc_set_alarm, 481 .read_offset = ti_k3_rtc_read_offset, 482 .set_offset = ti_k3_rtc_set_offset, 483 .alarm_irq_enable = ti_k3_rtc_alarm_irq_enable, 484 }; 485 486 static int ti_k3_rtc_scratch_read(void *priv_data, unsigned int offset, 487 void *val, size_t bytes) 488 { 489 struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data; 490 491 return regmap_bulk_read(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4); 492 } 493 494 static int ti_k3_rtc_scratch_write(void *priv_data, unsigned int offset, 495 void *val, size_t bytes) 496 { 497 struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data; 498 int ret; 499 500 ret = regmap_bulk_write(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4); 501 if (ret) 502 return ret; 503 504 return k3rtc_fence(priv); 505 } 506 507 static struct nvmem_config ti_k3_rtc_nvmem_config = { 508 .name = "ti_k3_rtc_scratch", 509 .word_size = 4, 510 .stride = 4, 511 .size = REG_K3RTC_SCRATCH7 - REG_K3RTC_SCRATCH0 + 4, 512 .reg_read = ti_k3_rtc_scratch_read, 513 .reg_write = ti_k3_rtc_scratch_write, 514 }; 515 516 static int k3rtc_get_32kclk(struct device *dev, struct ti_k3_rtc *priv) 517 { 518 struct clk *clk; 519 520 clk = devm_clk_get_enabled(dev, "osc32k"); 521 if (IS_ERR(clk)) 522 return PTR_ERR(clk); 523 524 priv->rate_32k = clk_get_rate(clk); 525 526 /* Make sure we are exact 32k clock. Else, try to compensate delay */ 527 if (priv->rate_32k != 32768) 528 dev_warn(dev, "Clock rate %ld is not 32768! Could misbehave!\n", 529 priv->rate_32k); 530 531 /* 532 * Sync timeout should be two 32k clk sync cycles = ~61uS. We double 533 * it to comprehend intermediate bus segment and cpu frequency 534 * deltas 535 */ 536 priv->sync_timeout_us = (u32)(DIV_ROUND_UP_ULL(1000000, priv->rate_32k) * 4); 537 538 return 0; 539 } 540 541 static int k3rtc_get_vbusclk(struct device *dev, struct ti_k3_rtc *priv) 542 { 543 struct clk *clk; 544 545 /* Note: VBUS isn't a context clock, it is needed for hardware operation */ 546 clk = devm_clk_get_enabled(dev, "vbus"); 547 if (IS_ERR(clk)) 548 return PTR_ERR(clk); 549 550 return 0; 551 } 552 553 static int ti_k3_rtc_probe(struct platform_device *pdev) 554 { 555 struct device *dev = &pdev->dev; 556 struct ti_k3_rtc *priv; 557 void __iomem *rtc_base; 558 int ret; 559 560 priv = devm_kzalloc(dev, sizeof(struct ti_k3_rtc), GFP_KERNEL); 561 if (!priv) 562 return -ENOMEM; 563 564 rtc_base = devm_platform_ioremap_resource(pdev, 0); 565 if (IS_ERR(rtc_base)) 566 return PTR_ERR(rtc_base); 567 568 priv->regmap = devm_regmap_init_mmio(dev, rtc_base, &ti_k3_rtc_regmap_config); 569 if (IS_ERR(priv->regmap)) 570 return PTR_ERR(priv->regmap); 571 572 ret = devm_regmap_field_bulk_alloc(dev, priv->regmap, priv->r_fields, 573 ti_rtc_reg_fields, K3_RTC_MAX_FIELDS); 574 if (ret) 575 return ret; 576 577 ret = k3rtc_get_32kclk(dev, priv); 578 if (ret) 579 return ret; 580 ret = k3rtc_get_vbusclk(dev, priv); 581 if (ret) 582 return ret; 583 584 ret = platform_get_irq(pdev, 0); 585 if (ret < 0) 586 return ret; 587 priv->irq = (unsigned int)ret; 588 589 priv->rtc_dev = devm_rtc_allocate_device(dev); 590 if (IS_ERR(priv->rtc_dev)) 591 return PTR_ERR(priv->rtc_dev); 592 593 priv->rtc_dev->ops = &ti_k3_rtc_ops; 594 priv->rtc_dev->range_max = (1ULL << 48) - 1; /* 48Bit seconds */ 595 ti_k3_rtc_nvmem_config.priv = priv; 596 597 ret = devm_request_threaded_irq(dev, priv->irq, NULL, 598 ti_k3_rtc_interrupt, 599 IRQF_TRIGGER_HIGH | IRQF_ONESHOT, 600 dev_name(dev), dev); 601 if (ret) { 602 dev_err(dev, "Could not request IRQ: %d\n", ret); 603 return ret; 604 } 605 606 platform_set_drvdata(pdev, priv); 607 608 ret = k3rtc_configure(dev); 609 if (ret) 610 return ret; 611 612 if (device_property_present(dev, "wakeup-source")) 613 device_init_wakeup(dev, true); 614 else 615 device_set_wakeup_capable(dev, true); 616 617 ret = devm_rtc_register_device(priv->rtc_dev); 618 if (ret) 619 return ret; 620 621 return devm_rtc_nvmem_register(priv->rtc_dev, &ti_k3_rtc_nvmem_config); 622 } 623 624 static const struct of_device_id ti_k3_rtc_of_match_table[] = { 625 {.compatible = "ti,am62-rtc" }, 626 {} 627 }; 628 MODULE_DEVICE_TABLE(of, ti_k3_rtc_of_match_table); 629 630 static int __maybe_unused ti_k3_rtc_suspend(struct device *dev) 631 { 632 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 633 634 if (device_may_wakeup(dev)) 635 return enable_irq_wake(priv->irq); 636 637 return 0; 638 } 639 640 static int __maybe_unused ti_k3_rtc_resume(struct device *dev) 641 { 642 struct ti_k3_rtc *priv = dev_get_drvdata(dev); 643 644 if (device_may_wakeup(dev)) 645 disable_irq_wake(priv->irq); 646 return 0; 647 } 648 649 static SIMPLE_DEV_PM_OPS(ti_k3_rtc_pm_ops, ti_k3_rtc_suspend, ti_k3_rtc_resume); 650 651 static struct platform_driver ti_k3_rtc_driver = { 652 .probe = ti_k3_rtc_probe, 653 .driver = { 654 .name = "rtc-ti-k3", 655 .of_match_table = ti_k3_rtc_of_match_table, 656 .pm = &ti_k3_rtc_pm_ops, 657 }, 658 }; 659 module_platform_driver(ti_k3_rtc_driver); 660 661 MODULE_LICENSE("GPL"); 662 MODULE_DESCRIPTION("TI K3 RTC driver"); 663 MODULE_AUTHOR("Nishanth Menon"); 664