1 /* 2 * Copyright (C) 2017 Spreadtrum Communications Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0 5 */ 6 7 #include <linux/bitops.h> 8 #include <linux/delay.h> 9 #include <linux/err.h> 10 #include <linux/module.h> 11 #include <linux/of.h> 12 #include <linux/platform_device.h> 13 #include <linux/regmap.h> 14 #include <linux/rtc.h> 15 16 #define SPRD_RTC_SEC_CNT_VALUE 0x0 17 #define SPRD_RTC_MIN_CNT_VALUE 0x4 18 #define SPRD_RTC_HOUR_CNT_VALUE 0x8 19 #define SPRD_RTC_DAY_CNT_VALUE 0xc 20 #define SPRD_RTC_SEC_CNT_UPD 0x10 21 #define SPRD_RTC_MIN_CNT_UPD 0x14 22 #define SPRD_RTC_HOUR_CNT_UPD 0x18 23 #define SPRD_RTC_DAY_CNT_UPD 0x1c 24 #define SPRD_RTC_SEC_ALM_UPD 0x20 25 #define SPRD_RTC_MIN_ALM_UPD 0x24 26 #define SPRD_RTC_HOUR_ALM_UPD 0x28 27 #define SPRD_RTC_DAY_ALM_UPD 0x2c 28 #define SPRD_RTC_INT_EN 0x30 29 #define SPRD_RTC_INT_RAW_STS 0x34 30 #define SPRD_RTC_INT_CLR 0x38 31 #define SPRD_RTC_INT_MASK_STS 0x3C 32 #define SPRD_RTC_SEC_ALM_VALUE 0x40 33 #define SPRD_RTC_MIN_ALM_VALUE 0x44 34 #define SPRD_RTC_HOUR_ALM_VALUE 0x48 35 #define SPRD_RTC_DAY_ALM_VALUE 0x4c 36 #define SPRD_RTC_SPG_VALUE 0x50 37 #define SPRD_RTC_SPG_UPD 0x54 38 #define SPRD_RTC_PWR_CTRL 0x58 39 #define SPRD_RTC_PWR_STS 0x5c 40 #define SPRD_RTC_SEC_AUXALM_UPD 0x60 41 #define SPRD_RTC_MIN_AUXALM_UPD 0x64 42 #define SPRD_RTC_HOUR_AUXALM_UPD 0x68 43 #define SPRD_RTC_DAY_AUXALM_UPD 0x6c 44 45 /* BIT & MASK definition for SPRD_RTC_INT_* registers */ 46 #define SPRD_RTC_SEC_EN BIT(0) 47 #define SPRD_RTC_MIN_EN BIT(1) 48 #define SPRD_RTC_HOUR_EN BIT(2) 49 #define SPRD_RTC_DAY_EN BIT(3) 50 #define SPRD_RTC_ALARM_EN BIT(4) 51 #define SPRD_RTC_HRS_FORMAT_EN BIT(5) 52 #define SPRD_RTC_AUXALM_EN BIT(6) 53 #define SPRD_RTC_SPG_UPD_EN BIT(7) 54 #define SPRD_RTC_SEC_UPD_EN BIT(8) 55 #define SPRD_RTC_MIN_UPD_EN BIT(9) 56 #define SPRD_RTC_HOUR_UPD_EN BIT(10) 57 #define SPRD_RTC_DAY_UPD_EN BIT(11) 58 #define SPRD_RTC_ALMSEC_UPD_EN BIT(12) 59 #define SPRD_RTC_ALMMIN_UPD_EN BIT(13) 60 #define SPRD_RTC_ALMHOUR_UPD_EN BIT(14) 61 #define SPRD_RTC_ALMDAY_UPD_EN BIT(15) 62 #define SPRD_RTC_INT_MASK GENMASK(15, 0) 63 64 #define SPRD_RTC_TIME_INT_MASK \ 65 (SPRD_RTC_SEC_UPD_EN | SPRD_RTC_MIN_UPD_EN | \ 66 SPRD_RTC_HOUR_UPD_EN | SPRD_RTC_DAY_UPD_EN) 67 68 #define SPRD_RTC_ALMTIME_INT_MASK \ 69 (SPRD_RTC_ALMSEC_UPD_EN | SPRD_RTC_ALMMIN_UPD_EN | \ 70 SPRD_RTC_ALMHOUR_UPD_EN | SPRD_RTC_ALMDAY_UPD_EN) 71 72 #define SPRD_RTC_ALM_INT_MASK \ 73 (SPRD_RTC_SEC_EN | SPRD_RTC_MIN_EN | \ 74 SPRD_RTC_HOUR_EN | SPRD_RTC_DAY_EN | \ 75 SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN) 76 77 /* second/minute/hour/day values mask definition */ 78 #define SPRD_RTC_SEC_MASK GENMASK(5, 0) 79 #define SPRD_RTC_MIN_MASK GENMASK(5, 0) 80 #define SPRD_RTC_HOUR_MASK GENMASK(4, 0) 81 #define SPRD_RTC_DAY_MASK GENMASK(15, 0) 82 83 /* alarm lock definition for SPRD_RTC_SPG_UPD register */ 84 #define SPRD_RTC_ALMLOCK_MASK GENMASK(7, 0) 85 #define SPRD_RTC_ALM_UNLOCK 0xa5 86 #define SPRD_RTC_ALM_LOCK (~SPRD_RTC_ALM_UNLOCK & \ 87 SPRD_RTC_ALMLOCK_MASK) 88 89 /* SPG values definition for SPRD_RTC_SPG_UPD register */ 90 #define SPRD_RTC_POWEROFF_ALM_FLAG BIT(8) 91 92 /* power control/status definition */ 93 #define SPRD_RTC_POWER_RESET_VALUE 0x96 94 #define SPRD_RTC_POWER_STS_CLEAR GENMASK(7, 0) 95 #define SPRD_RTC_POWER_STS_SHIFT 8 96 #define SPRD_RTC_POWER_STS_VALID \ 97 (~SPRD_RTC_POWER_RESET_VALUE << SPRD_RTC_POWER_STS_SHIFT) 98 99 /* timeout of synchronizing time and alarm registers (us) */ 100 #define SPRD_RTC_POLL_TIMEOUT 200000 101 #define SPRD_RTC_POLL_DELAY_US 20000 102 103 struct sprd_rtc { 104 struct rtc_device *rtc; 105 struct regmap *regmap; 106 struct device *dev; 107 u32 base; 108 int irq; 109 bool valid; 110 }; 111 112 /* 113 * The Spreadtrum RTC controller has 3 groups registers, including time, normal 114 * alarm and auxiliary alarm. The time group registers are used to set RTC time, 115 * the normal alarm registers are used to set normal alarm, and the auxiliary 116 * alarm registers are used to set auxiliary alarm. Both alarm event and 117 * auxiliary alarm event can wake up system from deep sleep, but only alarm 118 * event can power up system from power down status. 119 */ 120 enum sprd_rtc_reg_types { 121 SPRD_RTC_TIME, 122 SPRD_RTC_ALARM, 123 SPRD_RTC_AUX_ALARM, 124 }; 125 126 static int sprd_rtc_clear_alarm_ints(struct sprd_rtc *rtc) 127 { 128 return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, 129 SPRD_RTC_ALM_INT_MASK); 130 } 131 132 static int sprd_rtc_lock_alarm(struct sprd_rtc *rtc, bool lock) 133 { 134 int ret; 135 u32 val; 136 137 ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_SPG_VALUE, &val); 138 if (ret) 139 return ret; 140 141 val &= ~SPRD_RTC_ALMLOCK_MASK; 142 if (lock) 143 val |= SPRD_RTC_ALM_LOCK; 144 else 145 val |= SPRD_RTC_ALM_UNLOCK | SPRD_RTC_POWEROFF_ALM_FLAG; 146 147 ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_SPG_UPD, val); 148 if (ret) 149 return ret; 150 151 /* wait until the SPG value is updated successfully */ 152 ret = regmap_read_poll_timeout(rtc->regmap, 153 rtc->base + SPRD_RTC_INT_RAW_STS, val, 154 (val & SPRD_RTC_SPG_UPD_EN), 155 SPRD_RTC_POLL_DELAY_US, 156 SPRD_RTC_POLL_TIMEOUT); 157 if (ret) { 158 dev_err(rtc->dev, "failed to update SPG value:%d\n", ret); 159 return ret; 160 } 161 162 return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, 163 SPRD_RTC_SPG_UPD_EN); 164 } 165 166 static int sprd_rtc_get_secs(struct sprd_rtc *rtc, enum sprd_rtc_reg_types type, 167 time64_t *secs) 168 { 169 u32 sec_reg, min_reg, hour_reg, day_reg; 170 u32 val, sec, min, hour, day; 171 int ret; 172 173 switch (type) { 174 case SPRD_RTC_TIME: 175 sec_reg = SPRD_RTC_SEC_CNT_VALUE; 176 min_reg = SPRD_RTC_MIN_CNT_VALUE; 177 hour_reg = SPRD_RTC_HOUR_CNT_VALUE; 178 day_reg = SPRD_RTC_DAY_CNT_VALUE; 179 break; 180 case SPRD_RTC_ALARM: 181 sec_reg = SPRD_RTC_SEC_ALM_VALUE; 182 min_reg = SPRD_RTC_MIN_ALM_VALUE; 183 hour_reg = SPRD_RTC_HOUR_ALM_VALUE; 184 day_reg = SPRD_RTC_DAY_ALM_VALUE; 185 break; 186 case SPRD_RTC_AUX_ALARM: 187 sec_reg = SPRD_RTC_SEC_AUXALM_UPD; 188 min_reg = SPRD_RTC_MIN_AUXALM_UPD; 189 hour_reg = SPRD_RTC_HOUR_AUXALM_UPD; 190 day_reg = SPRD_RTC_DAY_AUXALM_UPD; 191 break; 192 default: 193 return -EINVAL; 194 } 195 196 ret = regmap_read(rtc->regmap, rtc->base + sec_reg, &val); 197 if (ret) 198 return ret; 199 200 sec = val & SPRD_RTC_SEC_MASK; 201 202 ret = regmap_read(rtc->regmap, rtc->base + min_reg, &val); 203 if (ret) 204 return ret; 205 206 min = val & SPRD_RTC_MIN_MASK; 207 208 ret = regmap_read(rtc->regmap, rtc->base + hour_reg, &val); 209 if (ret) 210 return ret; 211 212 hour = val & SPRD_RTC_HOUR_MASK; 213 214 ret = regmap_read(rtc->regmap, rtc->base + day_reg, &val); 215 if (ret) 216 return ret; 217 218 day = val & SPRD_RTC_DAY_MASK; 219 *secs = (((time64_t)(day * 24) + hour) * 60 + min) * 60 + sec; 220 return 0; 221 } 222 223 static int sprd_rtc_set_secs(struct sprd_rtc *rtc, enum sprd_rtc_reg_types type, 224 time64_t secs) 225 { 226 u32 sec_reg, min_reg, hour_reg, day_reg, sts_mask; 227 u32 sec, min, hour, day, val; 228 int ret, rem; 229 230 /* convert seconds to RTC time format */ 231 day = div_s64_rem(secs, 86400, &rem); 232 hour = rem / 3600; 233 rem -= hour * 3600; 234 min = rem / 60; 235 sec = rem - min * 60; 236 237 switch (type) { 238 case SPRD_RTC_TIME: 239 sec_reg = SPRD_RTC_SEC_CNT_UPD; 240 min_reg = SPRD_RTC_MIN_CNT_UPD; 241 hour_reg = SPRD_RTC_HOUR_CNT_UPD; 242 day_reg = SPRD_RTC_DAY_CNT_UPD; 243 sts_mask = SPRD_RTC_TIME_INT_MASK; 244 break; 245 case SPRD_RTC_ALARM: 246 sec_reg = SPRD_RTC_SEC_ALM_UPD; 247 min_reg = SPRD_RTC_MIN_ALM_UPD; 248 hour_reg = SPRD_RTC_HOUR_ALM_UPD; 249 day_reg = SPRD_RTC_DAY_ALM_UPD; 250 sts_mask = SPRD_RTC_ALMTIME_INT_MASK; 251 break; 252 case SPRD_RTC_AUX_ALARM: 253 sec_reg = SPRD_RTC_SEC_AUXALM_UPD; 254 min_reg = SPRD_RTC_MIN_AUXALM_UPD; 255 hour_reg = SPRD_RTC_HOUR_AUXALM_UPD; 256 day_reg = SPRD_RTC_DAY_AUXALM_UPD; 257 sts_mask = 0; 258 break; 259 default: 260 return -EINVAL; 261 } 262 263 ret = regmap_write(rtc->regmap, rtc->base + sec_reg, sec); 264 if (ret) 265 return ret; 266 267 ret = regmap_write(rtc->regmap, rtc->base + min_reg, min); 268 if (ret) 269 return ret; 270 271 ret = regmap_write(rtc->regmap, rtc->base + hour_reg, hour); 272 if (ret) 273 return ret; 274 275 ret = regmap_write(rtc->regmap, rtc->base + day_reg, day); 276 if (ret) 277 return ret; 278 279 if (type == SPRD_RTC_AUX_ALARM) 280 return 0; 281 282 /* 283 * Since the time and normal alarm registers are put in always-power-on 284 * region supplied by VDDRTC, then these registers changing time will 285 * be very long, about 125ms. Thus here we should wait until all 286 * values are updated successfully. 287 */ 288 ret = regmap_read_poll_timeout(rtc->regmap, 289 rtc->base + SPRD_RTC_INT_RAW_STS, val, 290 ((val & sts_mask) == sts_mask), 291 SPRD_RTC_POLL_DELAY_US, 292 SPRD_RTC_POLL_TIMEOUT); 293 if (ret < 0) { 294 dev_err(rtc->dev, "set time/alarm values timeout\n"); 295 return ret; 296 } 297 298 return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, 299 sts_mask); 300 } 301 302 static int sprd_rtc_set_aux_alarm(struct device *dev, struct rtc_wkalrm *alrm) 303 { 304 struct sprd_rtc *rtc = dev_get_drvdata(dev); 305 time64_t secs = rtc_tm_to_time64(&alrm->time); 306 int ret; 307 308 /* clear the auxiliary alarm interrupt status */ 309 ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, 310 SPRD_RTC_AUXALM_EN); 311 if (ret) 312 return ret; 313 314 ret = sprd_rtc_set_secs(rtc, SPRD_RTC_AUX_ALARM, secs); 315 if (ret) 316 return ret; 317 318 if (alrm->enabled) { 319 ret = regmap_update_bits(rtc->regmap, 320 rtc->base + SPRD_RTC_INT_EN, 321 SPRD_RTC_AUXALM_EN, 322 SPRD_RTC_AUXALM_EN); 323 } else { 324 ret = regmap_update_bits(rtc->regmap, 325 rtc->base + SPRD_RTC_INT_EN, 326 SPRD_RTC_AUXALM_EN, 0); 327 } 328 329 return ret; 330 } 331 332 static int sprd_rtc_read_time(struct device *dev, struct rtc_time *tm) 333 { 334 struct sprd_rtc *rtc = dev_get_drvdata(dev); 335 time64_t secs; 336 int ret; 337 338 if (!rtc->valid) { 339 dev_warn(dev, "RTC values are invalid\n"); 340 return -EINVAL; 341 } 342 343 ret = sprd_rtc_get_secs(rtc, SPRD_RTC_TIME, &secs); 344 if (ret) 345 return ret; 346 347 rtc_time64_to_tm(secs, tm); 348 return 0; 349 } 350 351 static int sprd_rtc_set_time(struct device *dev, struct rtc_time *tm) 352 { 353 struct sprd_rtc *rtc = dev_get_drvdata(dev); 354 time64_t secs = rtc_tm_to_time64(tm); 355 int ret; 356 357 ret = sprd_rtc_set_secs(rtc, SPRD_RTC_TIME, secs); 358 if (ret) 359 return ret; 360 361 if (!rtc->valid) { 362 /* Clear RTC power status firstly */ 363 ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_PWR_CTRL, 364 SPRD_RTC_POWER_STS_CLEAR); 365 if (ret) 366 return ret; 367 368 /* 369 * Set RTC power status to indicate now RTC has valid time 370 * values. 371 */ 372 ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_PWR_CTRL, 373 SPRD_RTC_POWER_STS_VALID); 374 if (ret) 375 return ret; 376 377 rtc->valid = true; 378 } 379 380 return 0; 381 } 382 383 static int sprd_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) 384 { 385 struct sprd_rtc *rtc = dev_get_drvdata(dev); 386 time64_t secs; 387 int ret; 388 u32 val; 389 390 /* 391 * The RTC core checks to see if there is an alarm already set in RTC 392 * hardware, and we always read the normal alarm at this time. 393 */ 394 ret = sprd_rtc_get_secs(rtc, SPRD_RTC_ALARM, &secs); 395 if (ret) 396 return ret; 397 398 rtc_time64_to_tm(secs, &alrm->time); 399 400 ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, &val); 401 if (ret) 402 return ret; 403 404 alrm->enabled = !!(val & SPRD_RTC_ALARM_EN); 405 406 ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_RAW_STS, &val); 407 if (ret) 408 return ret; 409 410 alrm->pending = !!(val & SPRD_RTC_ALARM_EN); 411 return 0; 412 } 413 414 static int sprd_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) 415 { 416 struct sprd_rtc *rtc = dev_get_drvdata(dev); 417 time64_t secs = rtc_tm_to_time64(&alrm->time); 418 struct rtc_time aie_time = 419 rtc_ktime_to_tm(rtc->rtc->aie_timer.node.expires); 420 int ret; 421 422 /* 423 * We have 2 groups alarms: normal alarm and auxiliary alarm. Since 424 * both normal alarm event and auxiliary alarm event can wake up system 425 * from deep sleep, but only alarm event can power up system from power 426 * down status. Moreover we do not need to poll about 125ms when 427 * updating auxiliary alarm registers. Thus we usually set auxiliary 428 * alarm when wake up system from deep sleep, and for other scenarios, 429 * we should set normal alarm with polling status. 430 * 431 * So here we check if the alarm time is set by aie_timer, if yes, we 432 * should set normal alarm, if not, we should set auxiliary alarm which 433 * means it is just a wake event. 434 */ 435 if (!rtc->rtc->aie_timer.enabled || rtc_tm_sub(&aie_time, &alrm->time)) 436 return sprd_rtc_set_aux_alarm(dev, alrm); 437 438 /* clear the alarm interrupt status firstly */ 439 ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, 440 SPRD_RTC_ALARM_EN); 441 if (ret) 442 return ret; 443 444 ret = sprd_rtc_set_secs(rtc, SPRD_RTC_ALARM, secs); 445 if (ret) 446 return ret; 447 448 if (alrm->enabled) { 449 ret = regmap_update_bits(rtc->regmap, 450 rtc->base + SPRD_RTC_INT_EN, 451 SPRD_RTC_ALARM_EN, 452 SPRD_RTC_ALARM_EN); 453 if (ret) 454 return ret; 455 456 /* unlock the alarm to enable the alarm function. */ 457 ret = sprd_rtc_lock_alarm(rtc, false); 458 } else { 459 regmap_update_bits(rtc->regmap, 460 rtc->base + SPRD_RTC_INT_EN, 461 SPRD_RTC_ALARM_EN, 0); 462 463 /* 464 * Lock the alarm function in case fake alarm event will power 465 * up systems. 466 */ 467 ret = sprd_rtc_lock_alarm(rtc, true); 468 } 469 470 return ret; 471 } 472 473 static int sprd_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) 474 { 475 struct sprd_rtc *rtc = dev_get_drvdata(dev); 476 int ret; 477 478 if (enabled) { 479 ret = regmap_update_bits(rtc->regmap, 480 rtc->base + SPRD_RTC_INT_EN, 481 SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN, 482 SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN); 483 if (ret) 484 return ret; 485 486 ret = sprd_rtc_lock_alarm(rtc, false); 487 } else { 488 regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, 489 SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN, 0); 490 491 ret = sprd_rtc_lock_alarm(rtc, true); 492 } 493 494 return ret; 495 } 496 497 static const struct rtc_class_ops sprd_rtc_ops = { 498 .read_time = sprd_rtc_read_time, 499 .set_time = sprd_rtc_set_time, 500 .read_alarm = sprd_rtc_read_alarm, 501 .set_alarm = sprd_rtc_set_alarm, 502 .alarm_irq_enable = sprd_rtc_alarm_irq_enable, 503 }; 504 505 static irqreturn_t sprd_rtc_handler(int irq, void *dev_id) 506 { 507 struct sprd_rtc *rtc = dev_id; 508 int ret; 509 510 ret = sprd_rtc_clear_alarm_ints(rtc); 511 if (ret) 512 return IRQ_RETVAL(ret); 513 514 rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF); 515 return IRQ_HANDLED; 516 } 517 518 static int sprd_rtc_check_power_down(struct sprd_rtc *rtc) 519 { 520 u32 val; 521 int ret; 522 523 ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_PWR_STS, &val); 524 if (ret) 525 return ret; 526 527 /* 528 * If the RTC power status value is SPRD_RTC_POWER_RESET_VALUE, which 529 * means the RTC has been powered down, so the RTC time values are 530 * invalid. 531 */ 532 rtc->valid = val != SPRD_RTC_POWER_RESET_VALUE; 533 return 0; 534 } 535 536 static int sprd_rtc_check_alarm_int(struct sprd_rtc *rtc) 537 { 538 u32 val; 539 int ret; 540 541 ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_SPG_VALUE, &val); 542 if (ret) 543 return ret; 544 545 /* 546 * The SPRD_RTC_INT_EN register is not put in always-power-on region 547 * supplied by VDDRTC, so we should check if we need enable the alarm 548 * interrupt when system booting. 549 * 550 * If we have set SPRD_RTC_POWEROFF_ALM_FLAG which is saved in 551 * always-power-on region, that means we have set one alarm last time, 552 * so we should enable the alarm interrupt to help RTC core to see if 553 * there is an alarm already set in RTC hardware. 554 */ 555 if (!(val & SPRD_RTC_POWEROFF_ALM_FLAG)) 556 return 0; 557 558 return regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, 559 SPRD_RTC_ALARM_EN, SPRD_RTC_ALARM_EN); 560 } 561 562 static int sprd_rtc_probe(struct platform_device *pdev) 563 { 564 struct device_node *node = pdev->dev.of_node; 565 struct sprd_rtc *rtc; 566 int ret; 567 568 rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL); 569 if (!rtc) 570 return -ENOMEM; 571 572 rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL); 573 if (!rtc->regmap) 574 return -ENODEV; 575 576 ret = of_property_read_u32(node, "reg", &rtc->base); 577 if (ret) { 578 dev_err(&pdev->dev, "failed to get RTC base address\n"); 579 return ret; 580 } 581 582 rtc->irq = platform_get_irq(pdev, 0); 583 if (rtc->irq < 0) 584 return rtc->irq; 585 586 rtc->rtc = devm_rtc_allocate_device(&pdev->dev); 587 if (IS_ERR(rtc->rtc)) 588 return PTR_ERR(rtc->rtc); 589 590 rtc->dev = &pdev->dev; 591 platform_set_drvdata(pdev, rtc); 592 593 /* check if we need set the alarm interrupt */ 594 ret = sprd_rtc_check_alarm_int(rtc); 595 if (ret) { 596 dev_err(&pdev->dev, "failed to check RTC alarm interrupt\n"); 597 return ret; 598 } 599 600 /* check if RTC time values are valid */ 601 ret = sprd_rtc_check_power_down(rtc); 602 if (ret) { 603 dev_err(&pdev->dev, "failed to check RTC time values\n"); 604 return ret; 605 } 606 607 ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL, 608 sprd_rtc_handler, 609 IRQF_ONESHOT | IRQF_EARLY_RESUME, 610 pdev->name, rtc); 611 if (ret < 0) { 612 dev_err(&pdev->dev, "failed to request RTC irq\n"); 613 return ret; 614 } 615 616 device_init_wakeup(&pdev->dev, 1); 617 618 rtc->rtc->ops = &sprd_rtc_ops; 619 rtc->rtc->range_min = 0; 620 rtc->rtc->range_max = 5662310399LL; 621 ret = devm_rtc_register_device(rtc->rtc); 622 if (ret) { 623 device_init_wakeup(&pdev->dev, 0); 624 return ret; 625 } 626 627 return 0; 628 } 629 630 static const struct of_device_id sprd_rtc_of_match[] = { 631 { .compatible = "sprd,sc2731-rtc", }, 632 { }, 633 }; 634 MODULE_DEVICE_TABLE(of, sprd_rtc_of_match); 635 636 static struct platform_driver sprd_rtc_driver = { 637 .driver = { 638 .name = "sprd-rtc", 639 .of_match_table = sprd_rtc_of_match, 640 }, 641 .probe = sprd_rtc_probe, 642 }; 643 module_platform_driver(sprd_rtc_driver); 644 645 MODULE_LICENSE("GPL v2"); 646 MODULE_DESCRIPTION("Spreadtrum RTC Device Driver"); 647 MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>"); 648