1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2022 Nuvoton Technology Corporation 3 4 #include <linux/bcd.h> 5 #include <linux/clk-provider.h> 6 #include <linux/err.h> 7 #include <linux/i2c.h> 8 #include <linux/module.h> 9 #include <linux/of.h> 10 #include <linux/rtc.h> 11 #include <linux/slab.h> 12 13 #define NCT3018Y_REG_SC 0x00 /* seconds */ 14 #define NCT3018Y_REG_SCA 0x01 /* alarm */ 15 #define NCT3018Y_REG_MN 0x02 16 #define NCT3018Y_REG_MNA 0x03 /* alarm */ 17 #define NCT3018Y_REG_HR 0x04 18 #define NCT3018Y_REG_HRA 0x05 /* alarm */ 19 #define NCT3018Y_REG_DW 0x06 20 #define NCT3018Y_REG_DM 0x07 21 #define NCT3018Y_REG_MO 0x08 22 #define NCT3018Y_REG_YR 0x09 23 #define NCT3018Y_REG_CTRL 0x0A /* timer control */ 24 #define NCT3018Y_REG_ST 0x0B /* status */ 25 #define NCT3018Y_REG_CLKO 0x0C /* clock out */ 26 #define NCT3018Y_REG_PART 0x21 /* part info */ 27 28 #define NCT3018Y_BIT_AF BIT(7) 29 #define NCT3018Y_BIT_ST BIT(7) 30 #define NCT3018Y_BIT_DM BIT(6) 31 #define NCT3018Y_BIT_HF BIT(5) 32 #define NCT3018Y_BIT_DSM BIT(4) 33 #define NCT3018Y_BIT_AIE BIT(3) 34 #define NCT3018Y_BIT_OFIE BIT(2) 35 #define NCT3018Y_BIT_CIE BIT(1) 36 #define NCT3018Y_BIT_TWO BIT(0) 37 38 #define NCT3018Y_REG_BAT_MASK 0x07 39 #define NCT3018Y_REG_CLKO_F_MASK 0x03 /* frequenc mask */ 40 #define NCT3018Y_REG_CLKO_CKE 0x80 /* clock out enabled */ 41 #define NCT3018Y_REG_PART_NCT3018Y 0x02 42 43 struct nct3018y { 44 struct rtc_device *rtc; 45 struct i2c_client *client; 46 int part_num; 47 #ifdef CONFIG_COMMON_CLK 48 struct clk_hw clkout_hw; 49 #endif 50 }; 51 52 static int nct3018y_set_alarm_mode(struct i2c_client *client, bool on) 53 { 54 int err, flags; 55 56 dev_dbg(&client->dev, "%s:on:%d\n", __func__, on); 57 58 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL); 59 if (flags < 0) { 60 dev_dbg(&client->dev, 61 "Failed to read NCT3018Y_REG_CTRL\n"); 62 return flags; 63 } 64 65 if (on) 66 flags |= NCT3018Y_BIT_AIE; 67 else 68 flags &= ~NCT3018Y_BIT_AIE; 69 70 flags |= NCT3018Y_BIT_CIE; 71 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags); 72 if (err < 0) { 73 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n"); 74 return err; 75 } 76 77 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST); 78 if (flags < 0) { 79 dev_dbg(&client->dev, 80 "Failed to read NCT3018Y_REG_ST\n"); 81 return flags; 82 } 83 84 flags &= ~(NCT3018Y_BIT_AF); 85 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_ST, flags); 86 if (err < 0) { 87 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_ST\n"); 88 return err; 89 } 90 91 return 0; 92 } 93 94 static int nct3018y_get_alarm_mode(struct i2c_client *client, unsigned char *alarm_enable, 95 unsigned char *alarm_flag) 96 { 97 int flags; 98 99 if (alarm_enable) { 100 dev_dbg(&client->dev, "%s:NCT3018Y_REG_CTRL\n", __func__); 101 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL); 102 if (flags < 0) 103 return flags; 104 *alarm_enable = flags & NCT3018Y_BIT_AIE; 105 } 106 107 if (alarm_flag) { 108 dev_dbg(&client->dev, "%s:NCT3018Y_REG_ST\n", __func__); 109 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST); 110 if (flags < 0) 111 return flags; 112 *alarm_flag = flags & NCT3018Y_BIT_AF; 113 } 114 115 dev_dbg(&client->dev, "%s:alarm_enable:%x alarm_flag:%x\n", 116 __func__, *alarm_enable, *alarm_flag); 117 118 return 0; 119 } 120 121 static irqreturn_t nct3018y_irq(int irq, void *dev_id) 122 { 123 struct nct3018y *nct3018y = i2c_get_clientdata(dev_id); 124 struct i2c_client *client = nct3018y->client; 125 int err; 126 unsigned char alarm_flag; 127 unsigned char alarm_enable; 128 129 dev_dbg(&client->dev, "%s:irq:%d\n", __func__, irq); 130 err = nct3018y_get_alarm_mode(nct3018y->client, &alarm_enable, &alarm_flag); 131 if (err) 132 return IRQ_NONE; 133 134 if (alarm_flag) { 135 dev_dbg(&client->dev, "%s:alarm flag:%x\n", 136 __func__, alarm_flag); 137 rtc_update_irq(nct3018y->rtc, 1, RTC_IRQF | RTC_AF); 138 nct3018y_set_alarm_mode(nct3018y->client, 0); 139 dev_dbg(&client->dev, "%s:IRQ_HANDLED\n", __func__); 140 return IRQ_HANDLED; 141 } 142 143 return IRQ_NONE; 144 } 145 146 /* 147 * In the routines that deal directly with the nct3018y hardware, we use 148 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. 149 */ 150 static int nct3018y_rtc_read_time(struct device *dev, struct rtc_time *tm) 151 { 152 struct i2c_client *client = to_i2c_client(dev); 153 unsigned char buf[10]; 154 int err; 155 156 err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_ST, 1, buf); 157 if (err < 0) 158 return err; 159 160 if (!buf[0]) { 161 dev_dbg(&client->dev, " voltage <=1.7, date/time is not reliable.\n"); 162 return -EINVAL; 163 } 164 165 err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_SC, sizeof(buf), buf); 166 if (err < 0) 167 return err; 168 169 tm->tm_sec = bcd2bin(buf[0] & 0x7F); 170 tm->tm_min = bcd2bin(buf[2] & 0x7F); 171 tm->tm_hour = bcd2bin(buf[4] & 0x3F); 172 tm->tm_wday = buf[6] & 0x07; 173 tm->tm_mday = bcd2bin(buf[7] & 0x3F); 174 tm->tm_mon = bcd2bin(buf[8] & 0x1F) - 1; 175 tm->tm_year = bcd2bin(buf[9]) + 100; 176 177 return 0; 178 } 179 180 static int nct3018y_rtc_set_time(struct device *dev, struct rtc_time *tm) 181 { 182 struct i2c_client *client = to_i2c_client(dev); 183 struct nct3018y *nct3018y = dev_get_drvdata(dev); 184 unsigned char buf[4] = {0}; 185 int err, flags; 186 int restore_flags = 0; 187 188 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL); 189 if (flags < 0) { 190 dev_dbg(&client->dev, "Failed to read NCT3018Y_REG_CTRL.\n"); 191 return flags; 192 } 193 194 /* Check and set TWO bit */ 195 if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y && !(flags & NCT3018Y_BIT_TWO)) { 196 restore_flags = 1; 197 flags |= NCT3018Y_BIT_TWO; 198 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags); 199 if (err < 0) { 200 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n"); 201 return err; 202 } 203 } 204 205 buf[0] = bin2bcd(tm->tm_sec); 206 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SC, buf[0]); 207 if (err < 0) { 208 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SC\n"); 209 return err; 210 } 211 212 buf[0] = bin2bcd(tm->tm_min); 213 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_MN, buf[0]); 214 if (err < 0) { 215 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MN\n"); 216 return err; 217 } 218 219 buf[0] = bin2bcd(tm->tm_hour); 220 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_HR, buf[0]); 221 if (err < 0) { 222 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HR\n"); 223 return err; 224 } 225 226 buf[0] = tm->tm_wday & 0x07; 227 buf[1] = bin2bcd(tm->tm_mday); 228 buf[2] = bin2bcd(tm->tm_mon + 1); 229 buf[3] = bin2bcd(tm->tm_year - 100); 230 err = i2c_smbus_write_i2c_block_data(client, NCT3018Y_REG_DW, 231 sizeof(buf), buf); 232 if (err < 0) { 233 dev_dbg(&client->dev, "Unable to write for day and mon and year\n"); 234 return -EIO; 235 } 236 237 /* Restore TWO bit */ 238 if (restore_flags) { 239 if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y) 240 flags &= ~NCT3018Y_BIT_TWO; 241 242 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags); 243 if (err < 0) { 244 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n"); 245 return err; 246 } 247 } 248 249 return err; 250 } 251 252 static int nct3018y_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) 253 { 254 struct i2c_client *client = to_i2c_client(dev); 255 unsigned char buf[5]; 256 int err; 257 258 err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_SCA, 259 sizeof(buf), buf); 260 if (err < 0) { 261 dev_dbg(&client->dev, "Unable to read date\n"); 262 return -EIO; 263 } 264 265 dev_dbg(&client->dev, "%s: raw data is sec=%02x, min=%02x hr=%02x\n", 266 __func__, buf[0], buf[2], buf[4]); 267 268 tm->time.tm_sec = bcd2bin(buf[0] & 0x7F); 269 tm->time.tm_min = bcd2bin(buf[2] & 0x7F); 270 tm->time.tm_hour = bcd2bin(buf[4] & 0x3F); 271 272 err = nct3018y_get_alarm_mode(client, &tm->enabled, &tm->pending); 273 if (err < 0) 274 return err; 275 276 dev_dbg(&client->dev, "%s:s=%d m=%d, hr=%d, enabled=%d, pending=%d\n", 277 __func__, tm->time.tm_sec, tm->time.tm_min, 278 tm->time.tm_hour, tm->enabled, tm->pending); 279 280 return 0; 281 } 282 283 static int nct3018y_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm) 284 { 285 struct i2c_client *client = to_i2c_client(dev); 286 int err; 287 288 dev_dbg(dev, "%s, sec=%d, min=%d hour=%d tm->enabled:%d\n", 289 __func__, tm->time.tm_sec, tm->time.tm_min, tm->time.tm_hour, 290 tm->enabled); 291 292 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SCA, bin2bcd(tm->time.tm_sec)); 293 if (err < 0) { 294 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SCA\n"); 295 return err; 296 } 297 298 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_MNA, bin2bcd(tm->time.tm_min)); 299 if (err < 0) { 300 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MNA\n"); 301 return err; 302 } 303 304 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_HRA, bin2bcd(tm->time.tm_hour)); 305 if (err < 0) { 306 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HRA\n"); 307 return err; 308 } 309 310 return nct3018y_set_alarm_mode(client, tm->enabled); 311 } 312 313 static int nct3018y_irq_enable(struct device *dev, unsigned int enabled) 314 { 315 dev_dbg(dev, "%s: alarm enable=%d\n", __func__, enabled); 316 317 return nct3018y_set_alarm_mode(to_i2c_client(dev), enabled); 318 } 319 320 static int nct3018y_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) 321 { 322 struct i2c_client *client = to_i2c_client(dev); 323 int status, flags = 0; 324 325 switch (cmd) { 326 case RTC_VL_READ: 327 status = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST); 328 if (status < 0) 329 return status; 330 331 if (!(status & NCT3018Y_REG_BAT_MASK)) 332 flags |= RTC_VL_DATA_INVALID; 333 334 return put_user(flags, (unsigned int __user *)arg); 335 336 default: 337 return -ENOIOCTLCMD; 338 } 339 } 340 341 #ifdef CONFIG_COMMON_CLK 342 /* 343 * Handling of the clkout 344 */ 345 346 #define clkout_hw_to_nct3018y(_hw) container_of(_hw, struct nct3018y, clkout_hw) 347 348 static const int clkout_rates[] = { 349 32768, 350 1024, 351 32, 352 1, 353 }; 354 355 static unsigned long nct3018y_clkout_recalc_rate(struct clk_hw *hw, 356 unsigned long parent_rate) 357 { 358 struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw); 359 struct i2c_client *client = nct3018y->client; 360 int flags; 361 362 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO); 363 if (flags < 0) 364 return 0; 365 366 flags &= NCT3018Y_REG_CLKO_F_MASK; 367 return clkout_rates[flags]; 368 } 369 370 static long nct3018y_clkout_round_rate(struct clk_hw *hw, unsigned long rate, 371 unsigned long *prate) 372 { 373 int i; 374 375 for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) 376 if (clkout_rates[i] <= rate) 377 return clkout_rates[i]; 378 379 return 0; 380 } 381 382 static int nct3018y_clkout_set_rate(struct clk_hw *hw, unsigned long rate, 383 unsigned long parent_rate) 384 { 385 struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw); 386 struct i2c_client *client = nct3018y->client; 387 int i, flags; 388 389 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO); 390 if (flags < 0) 391 return flags; 392 393 for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) 394 if (clkout_rates[i] == rate) { 395 flags &= ~NCT3018Y_REG_CLKO_F_MASK; 396 flags |= i; 397 return i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags); 398 } 399 400 return -EINVAL; 401 } 402 403 static int nct3018y_clkout_control(struct clk_hw *hw, bool enable) 404 { 405 struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw); 406 struct i2c_client *client = nct3018y->client; 407 int flags; 408 409 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO); 410 if (flags < 0) 411 return flags; 412 413 if (enable) 414 flags |= NCT3018Y_REG_CLKO_CKE; 415 else 416 flags &= ~NCT3018Y_REG_CLKO_CKE; 417 418 return i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags); 419 } 420 421 static int nct3018y_clkout_prepare(struct clk_hw *hw) 422 { 423 return nct3018y_clkout_control(hw, 1); 424 } 425 426 static void nct3018y_clkout_unprepare(struct clk_hw *hw) 427 { 428 nct3018y_clkout_control(hw, 0); 429 } 430 431 static int nct3018y_clkout_is_prepared(struct clk_hw *hw) 432 { 433 struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw); 434 struct i2c_client *client = nct3018y->client; 435 int flags; 436 437 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO); 438 if (flags < 0) 439 return flags; 440 441 return flags & NCT3018Y_REG_CLKO_CKE; 442 } 443 444 static const struct clk_ops nct3018y_clkout_ops = { 445 .prepare = nct3018y_clkout_prepare, 446 .unprepare = nct3018y_clkout_unprepare, 447 .is_prepared = nct3018y_clkout_is_prepared, 448 .recalc_rate = nct3018y_clkout_recalc_rate, 449 .round_rate = nct3018y_clkout_round_rate, 450 .set_rate = nct3018y_clkout_set_rate, 451 }; 452 453 static struct clk *nct3018y_clkout_register_clk(struct nct3018y *nct3018y) 454 { 455 struct i2c_client *client = nct3018y->client; 456 struct device_node *node = client->dev.of_node; 457 struct clk *clk; 458 struct clk_init_data init; 459 460 init.name = "nct3018y-clkout"; 461 init.ops = &nct3018y_clkout_ops; 462 init.flags = 0; 463 init.parent_names = NULL; 464 init.num_parents = 0; 465 nct3018y->clkout_hw.init = &init; 466 467 /* optional override of the clockname */ 468 of_property_read_string(node, "clock-output-names", &init.name); 469 470 /* register the clock */ 471 clk = devm_clk_register(&client->dev, &nct3018y->clkout_hw); 472 473 if (!IS_ERR(clk)) 474 of_clk_add_provider(node, of_clk_src_simple_get, clk); 475 476 return clk; 477 } 478 #endif 479 480 static const struct rtc_class_ops nct3018y_rtc_ops = { 481 .read_time = nct3018y_rtc_read_time, 482 .set_time = nct3018y_rtc_set_time, 483 .read_alarm = nct3018y_rtc_read_alarm, 484 .set_alarm = nct3018y_rtc_set_alarm, 485 .alarm_irq_enable = nct3018y_irq_enable, 486 .ioctl = nct3018y_ioctl, 487 }; 488 489 static int nct3018y_probe(struct i2c_client *client) 490 { 491 struct nct3018y *nct3018y; 492 int err, flags; 493 494 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | 495 I2C_FUNC_SMBUS_BYTE | 496 I2C_FUNC_SMBUS_BLOCK_DATA)) 497 return -ENODEV; 498 499 nct3018y = devm_kzalloc(&client->dev, sizeof(struct nct3018y), 500 GFP_KERNEL); 501 if (!nct3018y) 502 return -ENOMEM; 503 504 i2c_set_clientdata(client, nct3018y); 505 nct3018y->client = client; 506 device_set_wakeup_capable(&client->dev, 1); 507 508 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL); 509 if (flags < 0) { 510 dev_dbg(&client->dev, "%s: read error\n", __func__); 511 return flags; 512 } else if (flags & NCT3018Y_BIT_TWO) { 513 dev_dbg(&client->dev, "%s: NCT3018Y_BIT_TWO is set\n", __func__); 514 } 515 516 nct3018y->part_num = i2c_smbus_read_byte_data(client, NCT3018Y_REG_PART); 517 if (nct3018y->part_num < 0) { 518 dev_dbg(&client->dev, "Failed to read NCT3018Y_REG_PART.\n"); 519 return nct3018y->part_num; 520 } else if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y) { 521 flags = NCT3018Y_BIT_HF; 522 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags); 523 if (err < 0) { 524 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n"); 525 return err; 526 } 527 } 528 529 flags = 0; 530 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_ST, flags); 531 if (err < 0) { 532 dev_dbg(&client->dev, "%s: write error\n", __func__); 533 return err; 534 } 535 536 nct3018y->rtc = devm_rtc_allocate_device(&client->dev); 537 if (IS_ERR(nct3018y->rtc)) 538 return PTR_ERR(nct3018y->rtc); 539 540 nct3018y->rtc->ops = &nct3018y_rtc_ops; 541 nct3018y->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; 542 nct3018y->rtc->range_max = RTC_TIMESTAMP_END_2099; 543 544 if (client->irq > 0) { 545 err = devm_request_threaded_irq(&client->dev, client->irq, 546 NULL, nct3018y_irq, 547 IRQF_ONESHOT | IRQF_TRIGGER_FALLING, 548 "nct3018y", client); 549 if (err) { 550 dev_dbg(&client->dev, "unable to request IRQ %d\n", client->irq); 551 return err; 552 } 553 } else { 554 clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, nct3018y->rtc->features); 555 clear_bit(RTC_FEATURE_ALARM, nct3018y->rtc->features); 556 } 557 558 #ifdef CONFIG_COMMON_CLK 559 /* register clk in common clk framework */ 560 nct3018y_clkout_register_clk(nct3018y); 561 #endif 562 563 return devm_rtc_register_device(nct3018y->rtc); 564 } 565 566 static const struct i2c_device_id nct3018y_id[] = { 567 { "nct3018y", 0 }, 568 { } 569 }; 570 MODULE_DEVICE_TABLE(i2c, nct3018y_id); 571 572 static const struct of_device_id nct3018y_of_match[] = { 573 { .compatible = "nuvoton,nct3018y" }, 574 {} 575 }; 576 MODULE_DEVICE_TABLE(of, nct3018y_of_match); 577 578 static struct i2c_driver nct3018y_driver = { 579 .driver = { 580 .name = "rtc-nct3018y", 581 .of_match_table = nct3018y_of_match, 582 }, 583 .probe = nct3018y_probe, 584 .id_table = nct3018y_id, 585 }; 586 587 module_i2c_driver(nct3018y_driver); 588 589 MODULE_AUTHOR("Medad CChien <ctcchien@nuvoton.com>"); 590 MODULE_AUTHOR("Mia Lin <mimi05633@gmail.com>"); 591 MODULE_DESCRIPTION("Nuvoton NCT3018Y RTC driver"); 592 MODULE_LICENSE("GPL"); 593