1 /* 2 * An rtc driver for the Dallas DS1511 3 * 4 * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp> 5 * Copyright (C) 2007 Andrew Sharp <andy.sharp@lsi.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 * 11 * Real time clock driver for the Dallas 1511 chip, which also 12 * contains a watchdog timer. There is a tiny amount of code that 13 * platform code could use to mess with the watchdog device a little 14 * bit, but not a full watchdog driver. 15 */ 16 17 #include <linux/bcd.h> 18 #include <linux/init.h> 19 #include <linux/kernel.h> 20 #include <linux/gfp.h> 21 #include <linux/delay.h> 22 #include <linux/interrupt.h> 23 #include <linux/rtc.h> 24 #include <linux/platform_device.h> 25 #include <linux/io.h> 26 27 #define DRV_VERSION "0.6" 28 29 enum ds1511reg { 30 DS1511_SEC = 0x0, 31 DS1511_MIN = 0x1, 32 DS1511_HOUR = 0x2, 33 DS1511_DOW = 0x3, 34 DS1511_DOM = 0x4, 35 DS1511_MONTH = 0x5, 36 DS1511_YEAR = 0x6, 37 DS1511_CENTURY = 0x7, 38 DS1511_AM1_SEC = 0x8, 39 DS1511_AM2_MIN = 0x9, 40 DS1511_AM3_HOUR = 0xa, 41 DS1511_AM4_DATE = 0xb, 42 DS1511_WD_MSEC = 0xc, 43 DS1511_WD_SEC = 0xd, 44 DS1511_CONTROL_A = 0xe, 45 DS1511_CONTROL_B = 0xf, 46 DS1511_RAMADDR_LSB = 0x10, 47 DS1511_RAMDATA = 0x13 48 }; 49 50 #define DS1511_BLF1 0x80 51 #define DS1511_BLF2 0x40 52 #define DS1511_PRS 0x20 53 #define DS1511_PAB 0x10 54 #define DS1511_TDF 0x08 55 #define DS1511_KSF 0x04 56 #define DS1511_WDF 0x02 57 #define DS1511_IRQF 0x01 58 #define DS1511_TE 0x80 59 #define DS1511_CS 0x40 60 #define DS1511_BME 0x20 61 #define DS1511_TPE 0x10 62 #define DS1511_TIE 0x08 63 #define DS1511_KIE 0x04 64 #define DS1511_WDE 0x02 65 #define DS1511_WDS 0x01 66 #define DS1511_RAM_MAX 0xff 67 68 #define RTC_CMD DS1511_CONTROL_B 69 #define RTC_CMD1 DS1511_CONTROL_A 70 71 #define RTC_ALARM_SEC DS1511_AM1_SEC 72 #define RTC_ALARM_MIN DS1511_AM2_MIN 73 #define RTC_ALARM_HOUR DS1511_AM3_HOUR 74 #define RTC_ALARM_DATE DS1511_AM4_DATE 75 76 #define RTC_SEC DS1511_SEC 77 #define RTC_MIN DS1511_MIN 78 #define RTC_HOUR DS1511_HOUR 79 #define RTC_DOW DS1511_DOW 80 #define RTC_DOM DS1511_DOM 81 #define RTC_MON DS1511_MONTH 82 #define RTC_YEAR DS1511_YEAR 83 #define RTC_CENTURY DS1511_CENTURY 84 85 #define RTC_TIE DS1511_TIE 86 #define RTC_TE DS1511_TE 87 88 struct rtc_plat_data { 89 struct rtc_device *rtc; 90 void __iomem *ioaddr; /* virtual base address */ 91 int size; /* amount of memory mapped */ 92 int irq; 93 unsigned int irqen; 94 int alrm_sec; 95 int alrm_min; 96 int alrm_hour; 97 int alrm_mday; 98 spinlock_t lock; 99 }; 100 101 static DEFINE_SPINLOCK(ds1511_lock); 102 103 static __iomem char *ds1511_base; 104 static u32 reg_spacing = 1; 105 106 static noinline void 107 rtc_write(uint8_t val, uint32_t reg) 108 { 109 writeb(val, ds1511_base + (reg * reg_spacing)); 110 } 111 112 static inline void 113 rtc_write_alarm(uint8_t val, enum ds1511reg reg) 114 { 115 rtc_write((val | 0x80), reg); 116 } 117 118 static noinline uint8_t 119 rtc_read(enum ds1511reg reg) 120 { 121 return readb(ds1511_base + (reg * reg_spacing)); 122 } 123 124 static inline void 125 rtc_disable_update(void) 126 { 127 rtc_write((rtc_read(RTC_CMD) & ~RTC_TE), RTC_CMD); 128 } 129 130 static void 131 rtc_enable_update(void) 132 { 133 rtc_write((rtc_read(RTC_CMD) | RTC_TE), RTC_CMD); 134 } 135 136 /* 137 * #define DS1511_WDOG_RESET_SUPPORT 138 * 139 * Uncomment this if you want to use these routines in 140 * some platform code. 141 */ 142 #ifdef DS1511_WDOG_RESET_SUPPORT 143 /* 144 * just enough code to set the watchdog timer so that it 145 * will reboot the system 146 */ 147 void 148 ds1511_wdog_set(unsigned long deciseconds) 149 { 150 /* 151 * the wdog timer can take 99.99 seconds 152 */ 153 deciseconds %= 10000; 154 /* 155 * set the wdog values in the wdog registers 156 */ 157 rtc_write(bin2bcd(deciseconds % 100), DS1511_WD_MSEC); 158 rtc_write(bin2bcd(deciseconds / 100), DS1511_WD_SEC); 159 /* 160 * set wdog enable and wdog 'steering' bit to issue a reset 161 */ 162 rtc_write(DS1511_WDE | DS1511_WDS, RTC_CMD); 163 } 164 165 void 166 ds1511_wdog_disable(void) 167 { 168 /* 169 * clear wdog enable and wdog 'steering' bits 170 */ 171 rtc_write(rtc_read(RTC_CMD) & ~(DS1511_WDE | DS1511_WDS), RTC_CMD); 172 /* 173 * clear the wdog counter 174 */ 175 rtc_write(0, DS1511_WD_MSEC); 176 rtc_write(0, DS1511_WD_SEC); 177 } 178 #endif 179 180 /* 181 * set the rtc chip's idea of the time. 182 * stupidly, some callers call with year unmolested; 183 * and some call with year = year - 1900. thanks. 184 */ 185 static int ds1511_rtc_set_time(struct device *dev, struct rtc_time *rtc_tm) 186 { 187 u8 mon, day, dow, hrs, min, sec, yrs, cen; 188 unsigned long flags; 189 190 /* 191 * won't have to change this for a while 192 */ 193 if (rtc_tm->tm_year < 1900) { 194 rtc_tm->tm_year += 1900; 195 } 196 197 if (rtc_tm->tm_year < 1970) { 198 return -EINVAL; 199 } 200 yrs = rtc_tm->tm_year % 100; 201 cen = rtc_tm->tm_year / 100; 202 mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */ 203 day = rtc_tm->tm_mday; 204 dow = rtc_tm->tm_wday & 0x7; /* automatic BCD */ 205 hrs = rtc_tm->tm_hour; 206 min = rtc_tm->tm_min; 207 sec = rtc_tm->tm_sec; 208 209 if ((mon > 12) || (day == 0)) { 210 return -EINVAL; 211 } 212 213 if (day > rtc_month_days(rtc_tm->tm_mon, rtc_tm->tm_year)) { 214 return -EINVAL; 215 } 216 217 if ((hrs >= 24) || (min >= 60) || (sec >= 60)) { 218 return -EINVAL; 219 } 220 221 /* 222 * each register is a different number of valid bits 223 */ 224 sec = bin2bcd(sec) & 0x7f; 225 min = bin2bcd(min) & 0x7f; 226 hrs = bin2bcd(hrs) & 0x3f; 227 day = bin2bcd(day) & 0x3f; 228 mon = bin2bcd(mon) & 0x1f; 229 yrs = bin2bcd(yrs) & 0xff; 230 cen = bin2bcd(cen) & 0xff; 231 232 spin_lock_irqsave(&ds1511_lock, flags); 233 rtc_disable_update(); 234 rtc_write(cen, RTC_CENTURY); 235 rtc_write(yrs, RTC_YEAR); 236 rtc_write((rtc_read(RTC_MON) & 0xe0) | mon, RTC_MON); 237 rtc_write(day, RTC_DOM); 238 rtc_write(hrs, RTC_HOUR); 239 rtc_write(min, RTC_MIN); 240 rtc_write(sec, RTC_SEC); 241 rtc_write(dow, RTC_DOW); 242 rtc_enable_update(); 243 spin_unlock_irqrestore(&ds1511_lock, flags); 244 245 return 0; 246 } 247 248 static int ds1511_rtc_read_time(struct device *dev, struct rtc_time *rtc_tm) 249 { 250 unsigned int century; 251 unsigned long flags; 252 253 spin_lock_irqsave(&ds1511_lock, flags); 254 rtc_disable_update(); 255 256 rtc_tm->tm_sec = rtc_read(RTC_SEC) & 0x7f; 257 rtc_tm->tm_min = rtc_read(RTC_MIN) & 0x7f; 258 rtc_tm->tm_hour = rtc_read(RTC_HOUR) & 0x3f; 259 rtc_tm->tm_mday = rtc_read(RTC_DOM) & 0x3f; 260 rtc_tm->tm_wday = rtc_read(RTC_DOW) & 0x7; 261 rtc_tm->tm_mon = rtc_read(RTC_MON) & 0x1f; 262 rtc_tm->tm_year = rtc_read(RTC_YEAR) & 0x7f; 263 century = rtc_read(RTC_CENTURY); 264 265 rtc_enable_update(); 266 spin_unlock_irqrestore(&ds1511_lock, flags); 267 268 rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); 269 rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); 270 rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); 271 rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); 272 rtc_tm->tm_wday = bcd2bin(rtc_tm->tm_wday); 273 rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); 274 rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); 275 century = bcd2bin(century) * 100; 276 277 /* 278 * Account for differences between how the RTC uses the values 279 * and how they are defined in a struct rtc_time; 280 */ 281 century += rtc_tm->tm_year; 282 rtc_tm->tm_year = century - 1900; 283 284 rtc_tm->tm_mon--; 285 286 if (rtc_valid_tm(rtc_tm) < 0) { 287 dev_err(dev, "retrieved date/time is not valid.\n"); 288 rtc_time_to_tm(0, rtc_tm); 289 } 290 return 0; 291 } 292 293 /* 294 * write the alarm register settings 295 * 296 * we only have the use to interrupt every second, otherwise 297 * known as the update interrupt, or the interrupt if the whole 298 * date/hours/mins/secs matches. the ds1511 has many more 299 * permutations, but the kernel doesn't. 300 */ 301 static void 302 ds1511_rtc_update_alarm(struct rtc_plat_data *pdata) 303 { 304 unsigned long flags; 305 306 spin_lock_irqsave(&pdata->lock, flags); 307 rtc_write(pdata->alrm_mday < 0 || (pdata->irqen & RTC_UF) ? 308 0x80 : bin2bcd(pdata->alrm_mday) & 0x3f, 309 RTC_ALARM_DATE); 310 rtc_write(pdata->alrm_hour < 0 || (pdata->irqen & RTC_UF) ? 311 0x80 : bin2bcd(pdata->alrm_hour) & 0x3f, 312 RTC_ALARM_HOUR); 313 rtc_write(pdata->alrm_min < 0 || (pdata->irqen & RTC_UF) ? 314 0x80 : bin2bcd(pdata->alrm_min) & 0x7f, 315 RTC_ALARM_MIN); 316 rtc_write(pdata->alrm_sec < 0 || (pdata->irqen & RTC_UF) ? 317 0x80 : bin2bcd(pdata->alrm_sec) & 0x7f, 318 RTC_ALARM_SEC); 319 rtc_write(rtc_read(RTC_CMD) | (pdata->irqen ? RTC_TIE : 0), RTC_CMD); 320 rtc_read(RTC_CMD1); /* clear interrupts */ 321 spin_unlock_irqrestore(&pdata->lock, flags); 322 } 323 324 static int 325 ds1511_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) 326 { 327 struct platform_device *pdev = to_platform_device(dev); 328 struct rtc_plat_data *pdata = platform_get_drvdata(pdev); 329 330 if (pdata->irq <= 0) 331 return -EINVAL; 332 333 pdata->alrm_mday = alrm->time.tm_mday; 334 pdata->alrm_hour = alrm->time.tm_hour; 335 pdata->alrm_min = alrm->time.tm_min; 336 pdata->alrm_sec = alrm->time.tm_sec; 337 if (alrm->enabled) { 338 pdata->irqen |= RTC_AF; 339 } 340 ds1511_rtc_update_alarm(pdata); 341 return 0; 342 } 343 344 static int 345 ds1511_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) 346 { 347 struct platform_device *pdev = to_platform_device(dev); 348 struct rtc_plat_data *pdata = platform_get_drvdata(pdev); 349 350 if (pdata->irq <= 0) 351 return -EINVAL; 352 353 alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday; 354 alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour; 355 alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min; 356 alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec; 357 alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0; 358 return 0; 359 } 360 361 static irqreturn_t 362 ds1511_interrupt(int irq, void *dev_id) 363 { 364 struct platform_device *pdev = dev_id; 365 struct rtc_plat_data *pdata = platform_get_drvdata(pdev); 366 unsigned long events = 0; 367 368 spin_lock(&pdata->lock); 369 /* 370 * read and clear interrupt 371 */ 372 if (rtc_read(RTC_CMD1) & DS1511_IRQF) { 373 events = RTC_IRQF; 374 if (rtc_read(RTC_ALARM_SEC) & 0x80) 375 events |= RTC_UF; 376 else 377 events |= RTC_AF; 378 if (likely(pdata->rtc)) 379 rtc_update_irq(pdata->rtc, 1, events); 380 } 381 spin_unlock(&pdata->lock); 382 return events ? IRQ_HANDLED : IRQ_NONE; 383 } 384 385 static int ds1511_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) 386 { 387 struct platform_device *pdev = to_platform_device(dev); 388 struct rtc_plat_data *pdata = platform_get_drvdata(pdev); 389 390 if (pdata->irq <= 0) 391 return -EINVAL; 392 if (enabled) 393 pdata->irqen |= RTC_AF; 394 else 395 pdata->irqen &= ~RTC_AF; 396 ds1511_rtc_update_alarm(pdata); 397 return 0; 398 } 399 400 static const struct rtc_class_ops ds1511_rtc_ops = { 401 .read_time = ds1511_rtc_read_time, 402 .set_time = ds1511_rtc_set_time, 403 .read_alarm = ds1511_rtc_read_alarm, 404 .set_alarm = ds1511_rtc_set_alarm, 405 .alarm_irq_enable = ds1511_rtc_alarm_irq_enable, 406 }; 407 408 static ssize_t 409 ds1511_nvram_read(struct file *filp, struct kobject *kobj, 410 struct bin_attribute *ba, 411 char *buf, loff_t pos, size_t size) 412 { 413 ssize_t count; 414 415 /* 416 * if count is more than one, turn on "burst" mode 417 * turn it off when you're done 418 */ 419 if (size > 1) { 420 rtc_write((rtc_read(RTC_CMD) | DS1511_BME), RTC_CMD); 421 } 422 if (pos > DS1511_RAM_MAX) { 423 pos = DS1511_RAM_MAX; 424 } 425 if (size + pos > DS1511_RAM_MAX + 1) { 426 size = DS1511_RAM_MAX - pos + 1; 427 } 428 rtc_write(pos, DS1511_RAMADDR_LSB); 429 for (count = 0; size > 0; count++, size--) { 430 *buf++ = rtc_read(DS1511_RAMDATA); 431 } 432 if (count > 1) { 433 rtc_write((rtc_read(RTC_CMD) & ~DS1511_BME), RTC_CMD); 434 } 435 return count; 436 } 437 438 static ssize_t 439 ds1511_nvram_write(struct file *filp, struct kobject *kobj, 440 struct bin_attribute *bin_attr, 441 char *buf, loff_t pos, size_t size) 442 { 443 ssize_t count; 444 445 /* 446 * if count is more than one, turn on "burst" mode 447 * turn it off when you're done 448 */ 449 if (size > 1) { 450 rtc_write((rtc_read(RTC_CMD) | DS1511_BME), RTC_CMD); 451 } 452 if (pos > DS1511_RAM_MAX) { 453 pos = DS1511_RAM_MAX; 454 } 455 if (size + pos > DS1511_RAM_MAX + 1) { 456 size = DS1511_RAM_MAX - pos + 1; 457 } 458 rtc_write(pos, DS1511_RAMADDR_LSB); 459 for (count = 0; size > 0; count++, size--) { 460 rtc_write(*buf++, DS1511_RAMDATA); 461 } 462 if (count > 1) { 463 rtc_write((rtc_read(RTC_CMD) & ~DS1511_BME), RTC_CMD); 464 } 465 return count; 466 } 467 468 static struct bin_attribute ds1511_nvram_attr = { 469 .attr = { 470 .name = "nvram", 471 .mode = S_IRUGO | S_IWUSR, 472 }, 473 .size = DS1511_RAM_MAX, 474 .read = ds1511_nvram_read, 475 .write = ds1511_nvram_write, 476 }; 477 478 static int __devinit 479 ds1511_rtc_probe(struct platform_device *pdev) 480 { 481 struct rtc_device *rtc; 482 struct resource *res; 483 struct rtc_plat_data *pdata; 484 int ret = 0; 485 486 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 487 if (!res) { 488 return -ENODEV; 489 } 490 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 491 if (!pdata) 492 return -ENOMEM; 493 pdata->size = resource_size(res); 494 if (!devm_request_mem_region(&pdev->dev, res->start, pdata->size, 495 pdev->name)) 496 return -EBUSY; 497 ds1511_base = devm_ioremap(&pdev->dev, res->start, pdata->size); 498 if (!ds1511_base) 499 return -ENOMEM; 500 pdata->ioaddr = ds1511_base; 501 pdata->irq = platform_get_irq(pdev, 0); 502 503 /* 504 * turn on the clock and the crystal, etc. 505 */ 506 rtc_write(0, RTC_CMD); 507 rtc_write(0, RTC_CMD1); 508 /* 509 * clear the wdog counter 510 */ 511 rtc_write(0, DS1511_WD_MSEC); 512 rtc_write(0, DS1511_WD_SEC); 513 /* 514 * start the clock 515 */ 516 rtc_enable_update(); 517 518 /* 519 * check for a dying bat-tree 520 */ 521 if (rtc_read(RTC_CMD1) & DS1511_BLF1) { 522 dev_warn(&pdev->dev, "voltage-low detected.\n"); 523 } 524 525 spin_lock_init(&pdata->lock); 526 platform_set_drvdata(pdev, pdata); 527 /* 528 * if the platform has an interrupt in mind for this device, 529 * then by all means, set it 530 */ 531 if (pdata->irq > 0) { 532 rtc_read(RTC_CMD1); 533 if (devm_request_irq(&pdev->dev, pdata->irq, ds1511_interrupt, 534 IRQF_DISABLED | IRQF_SHARED, pdev->name, pdev) < 0) { 535 536 dev_warn(&pdev->dev, "interrupt not available.\n"); 537 pdata->irq = 0; 538 } 539 } 540 541 rtc = rtc_device_register(pdev->name, &pdev->dev, &ds1511_rtc_ops, 542 THIS_MODULE); 543 if (IS_ERR(rtc)) 544 return PTR_ERR(rtc); 545 pdata->rtc = rtc; 546 547 ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); 548 if (ret) 549 rtc_device_unregister(pdata->rtc); 550 return ret; 551 } 552 553 static int __devexit 554 ds1511_rtc_remove(struct platform_device *pdev) 555 { 556 struct rtc_plat_data *pdata = platform_get_drvdata(pdev); 557 558 sysfs_remove_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); 559 rtc_device_unregister(pdata->rtc); 560 if (pdata->irq > 0) { 561 /* 562 * disable the alarm interrupt 563 */ 564 rtc_write(rtc_read(RTC_CMD) & ~RTC_TIE, RTC_CMD); 565 rtc_read(RTC_CMD1); 566 } 567 return 0; 568 } 569 570 /* work with hotplug and coldplug */ 571 MODULE_ALIAS("platform:ds1511"); 572 573 static struct platform_driver ds1511_rtc_driver = { 574 .probe = ds1511_rtc_probe, 575 .remove = __devexit_p(ds1511_rtc_remove), 576 .driver = { 577 .name = "ds1511", 578 .owner = THIS_MODULE, 579 }, 580 }; 581 582 static int __init 583 ds1511_rtc_init(void) 584 { 585 return platform_driver_register(&ds1511_rtc_driver); 586 } 587 588 static void __exit 589 ds1511_rtc_exit(void) 590 { 591 platform_driver_unregister(&ds1511_rtc_driver); 592 } 593 594 module_init(ds1511_rtc_init); 595 module_exit(ds1511_rtc_exit); 596 597 MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>"); 598 MODULE_DESCRIPTION("Dallas DS1511 RTC driver"); 599 MODULE_LICENSE("GPL"); 600 MODULE_VERSION(DRV_VERSION); 601