xref: /linux/drivers/rtc/rtc-at91sam9.c (revision ed3174d93c342b8b2eeba6bbd124707d55304a7b)
1 /*
2  * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
3  *
4  * (C) 2007 Michel Benoit
5  *
6  * Based on rtc-at91rm9200.c by Rick Bronson
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * as published by the Free Software Foundation; either version
11  * 2 of the License, or (at your option) any later version.
12  */
13 
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/platform_device.h>
17 #include <linux/time.h>
18 #include <linux/rtc.h>
19 #include <linux/interrupt.h>
20 #include <linux/ioctl.h>
21 
22 #include <asm/mach/time.h>
23 #include <asm/arch/board.h>
24 #include <asm/arch/at91_rtt.h>
25 
26 
27 /*
28  * This driver uses two configurable hardware resources that live in the
29  * AT91SAM9 backup power domain (intended to be powered at all times)
30  * to implement the Real Time Clock interfaces
31  *
32  *  - A "Real-time Timer" (RTT) counts up in seconds from a base time.
33  *    We can't assign the counter value (CRTV) ... but we can reset it.
34  *
35  *  - One of the "General Purpose Backup Registers" (GPBRs) holds the
36  *    base time, normally an offset from the beginning of the POSIX
37  *    epoch (1970-Jan-1 00:00:00 UTC).  Some systems also include the
38  *    local timezone's offset.
39  *
40  * The RTC's value is the RTT counter plus that offset.  The RTC's alarm
41  * is likewise a base (ALMV) plus that offset.
42  *
43  * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
44  * choose from, or a "real" RTC module.  All systems have multiple GPBR
45  * registers available, likewise usable for more than "RTC" support.
46  */
47 
48 /*
49  * We store ALARM_DISABLED in ALMV to record that no alarm is set.
50  * It's also the reset value for that field.
51  */
52 #define ALARM_DISABLED	((u32)~0)
53 
54 
55 struct sam9_rtc {
56 	void __iomem		*rtt;
57 	struct rtc_device	*rtcdev;
58 	u32			imr;
59 };
60 
61 #define rtt_readl(rtc, field) \
62 	__raw_readl((rtc)->rtt + AT91_RTT_ ## field)
63 #define rtt_writel(rtc, field, val) \
64 	__raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field)
65 
66 #define gpbr_readl(rtc) \
67 	at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR)
68 #define gpbr_writel(rtc, val) \
69 	at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val))
70 
71 /*
72  * Read current time and date in RTC
73  */
74 static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
75 {
76 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
77 	u32 secs, secs2;
78 	u32 offset;
79 
80 	/* read current time offset */
81 	offset = gpbr_readl(rtc);
82 	if (offset == 0)
83 		return -EILSEQ;
84 
85 	/* reread the counter to help sync the two clock domains */
86 	secs = rtt_readl(rtc, VR);
87 	secs2 = rtt_readl(rtc, VR);
88 	if (secs != secs2)
89 		secs = rtt_readl(rtc, VR);
90 
91 	rtc_time_to_tm(offset + secs, tm);
92 
93 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
94 		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
95 		tm->tm_hour, tm->tm_min, tm->tm_sec);
96 
97 	return 0;
98 }
99 
100 /*
101  * Set current time and date in RTC
102  */
103 static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
104 {
105 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
106 	int err;
107 	u32 offset, alarm, mr;
108 	unsigned long secs;
109 
110 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
111 		1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
112 		tm->tm_hour, tm->tm_min, tm->tm_sec);
113 
114 	err = rtc_tm_to_time(tm, &secs);
115 	if (err != 0)
116 		return err;
117 
118 	mr = rtt_readl(rtc, MR);
119 
120 	/* disable interrupts */
121 	rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
122 
123 	/* read current time offset */
124 	offset = gpbr_readl(rtc);
125 
126 	/* store the new base time in a battery backup register */
127 	secs += 1;
128 	gpbr_writel(rtc, secs);
129 
130 	/* adjust the alarm time for the new base */
131 	alarm = rtt_readl(rtc, AR);
132 	if (alarm != ALARM_DISABLED) {
133 		if (offset > secs) {
134 			/* time jumped backwards, increase time until alarm */
135 			alarm += (offset - secs);
136 		} else if ((alarm + offset) > secs) {
137 			/* time jumped forwards, decrease time until alarm */
138 			alarm -= (secs - offset);
139 		} else {
140 			/* time jumped past the alarm, disable alarm */
141 			alarm = ALARM_DISABLED;
142 			mr &= ~AT91_RTT_ALMIEN;
143 		}
144 		rtt_writel(rtc, AR, alarm);
145 	}
146 
147 	/* reset the timer, and re-enable interrupts */
148 	rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
149 
150 	return 0;
151 }
152 
153 static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
154 {
155 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
156 	struct rtc_time *tm = &alrm->time;
157 	u32 alarm = rtt_readl(rtc, AR);
158 	u32 offset;
159 
160 	offset = gpbr_readl(rtc);
161 	if (offset == 0)
162 		return -EILSEQ;
163 
164 	memset(alrm, 0, sizeof(alrm));
165 	if (alarm != ALARM_DISABLED && offset != 0) {
166 		rtc_time_to_tm(offset + alarm, tm);
167 
168 		dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
169 			1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
170 			tm->tm_hour, tm->tm_min, tm->tm_sec);
171 
172 		if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
173 			alrm->enabled = 1;
174 	}
175 
176 	return 0;
177 }
178 
179 static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
180 {
181 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
182 	struct rtc_time *tm = &alrm->time;
183 	unsigned long secs;
184 	u32 offset;
185 	u32 mr;
186 	int err;
187 
188 	err = rtc_tm_to_time(tm, &secs);
189 	if (err != 0)
190 		return err;
191 
192 	offset = gpbr_readl(rtc);
193 	if (offset == 0) {
194 		/* time is not set */
195 		return -EILSEQ;
196 	}
197 	mr = rtt_readl(rtc, MR);
198 	rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
199 
200 	/* alarm in the past? finish and leave disabled */
201 	if (secs <= offset) {
202 		rtt_writel(rtc, AR, ALARM_DISABLED);
203 		return 0;
204 	}
205 
206 	/* else set alarm and maybe enable it */
207 	rtt_writel(rtc, AR, secs - offset);
208 	if (alrm->enabled)
209 		rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
210 
211 	dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
212 		tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
213 		tm->tm_min, tm->tm_sec);
214 
215 	return 0;
216 }
217 
218 /*
219  * Handle commands from user-space
220  */
221 static int at91_rtc_ioctl(struct device *dev, unsigned int cmd,
222 			unsigned long arg)
223 {
224 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
225 	int ret = 0;
226 	u32 mr = rtt_readl(rtc, MR);
227 
228 	dev_dbg(dev, "ioctl: cmd=%08x, arg=%08lx, mr %08x\n", cmd, arg, mr);
229 
230 	switch (cmd) {
231 	case RTC_AIE_OFF:		/* alarm off */
232 		rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
233 		break;
234 	case RTC_AIE_ON:		/* alarm on */
235 		rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
236 		break;
237 	case RTC_UIE_OFF:		/* update off */
238 		rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
239 		break;
240 	case RTC_UIE_ON:		/* update on */
241 		rtt_writel(rtc, MR, mr | AT91_RTT_RTTINCIEN);
242 		break;
243 	default:
244 		ret = -ENOIOCTLCMD;
245 		break;
246 	}
247 
248 	return ret;
249 }
250 
251 /*
252  * Provide additional RTC information in /proc/driver/rtc
253  */
254 static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
255 {
256 	struct sam9_rtc *rtc = dev_get_drvdata(dev);
257 	u32 mr = mr = rtt_readl(rtc, MR);
258 
259 	seq_printf(seq, "update_IRQ\t: %s\n",
260 			(mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
261 	return 0;
262 }
263 
264 /*
265  * IRQ handler for the RTC
266  */
267 static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
268 {
269 	struct sam9_rtc *rtc = _rtc;
270 	u32 sr, mr;
271 	unsigned long events = 0;
272 
273 	/* Shared interrupt may be for another device.  Note: reading
274 	 * SR clears it, so we must only read it in this irq handler!
275 	 */
276 	mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
277 	sr = rtt_readl(rtc, SR) & mr;
278 	if (!sr)
279 		return IRQ_NONE;
280 
281 	/* alarm status */
282 	if (sr & AT91_RTT_ALMS)
283 		events |= (RTC_AF | RTC_IRQF);
284 
285 	/* timer update/increment */
286 	if (sr & AT91_RTT_RTTINC)
287 		events |= (RTC_UF | RTC_IRQF);
288 
289 	rtc_update_irq(rtc->rtcdev, 1, events);
290 
291 	pr_debug("%s: num=%ld, events=0x%02lx\n", __FUNCTION__,
292 		events >> 8, events & 0x000000FF);
293 
294 	return IRQ_HANDLED;
295 }
296 
297 static const struct rtc_class_ops at91_rtc_ops = {
298 	.ioctl		= at91_rtc_ioctl,
299 	.read_time	= at91_rtc_readtime,
300 	.set_time	= at91_rtc_settime,
301 	.read_alarm	= at91_rtc_readalarm,
302 	.set_alarm	= at91_rtc_setalarm,
303 	.proc		= at91_rtc_proc,
304 };
305 
306 /*
307  * Initialize and install RTC driver
308  */
309 static int __init at91_rtc_probe(struct platform_device *pdev)
310 {
311 	struct resource	*r;
312 	struct sam9_rtc	*rtc;
313 	int		ret;
314 	u32		mr;
315 
316 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
317 	if (!r)
318 		return -ENODEV;
319 
320 	rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
321 	if (!rtc)
322 		return -ENOMEM;
323 
324 	platform_set_drvdata(pdev, rtc);
325 	rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
326 	rtc->rtt += r->start;
327 
328 	mr = rtt_readl(rtc, MR);
329 
330 	/* unless RTT is counting at 1 Hz, re-initialize it */
331 	if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) {
332 		mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES);
333 		gpbr_writel(rtc, 0);
334 	}
335 
336 	/* disable all interrupts (same as on shutdown path) */
337 	mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
338 	rtt_writel(rtc, MR, mr);
339 
340 	rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
341 				&at91_rtc_ops, THIS_MODULE);
342 	if (IS_ERR(rtc->rtcdev)) {
343 		ret = PTR_ERR(rtc->rtcdev);
344 		goto fail;
345 	}
346 
347 	/* register irq handler after we know what name we'll use */
348 	ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
349 				IRQF_DISABLED | IRQF_SHARED,
350 				rtc->rtcdev->dev.bus_id, rtc);
351 	if (ret) {
352 		dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS);
353 		rtc_device_unregister(rtc->rtcdev);
354 		goto fail;
355 	}
356 
357 	/* NOTE:  sam9260 rev A silicon has a ROM bug which resets the
358 	 * RTT on at least some reboots.  If you have that chip, you must
359 	 * initialize the time from some external source like a GPS, wall
360 	 * clock, discrete RTC, etc
361 	 */
362 
363 	if (gpbr_readl(rtc) == 0)
364 		dev_warn(&pdev->dev, "%s: SET TIME!\n",
365 				rtc->rtcdev->dev.bus_id);
366 
367 	return 0;
368 
369 fail:
370 	platform_set_drvdata(pdev, NULL);
371 	kfree(rtc);
372 	return ret;
373 }
374 
375 /*
376  * Disable and remove the RTC driver
377  */
378 static int __exit at91_rtc_remove(struct platform_device *pdev)
379 {
380 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
381 	u32		mr = rtt_readl(rtc, MR);
382 
383 	/* disable all interrupts */
384 	rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
385 	free_irq(AT91_ID_SYS, rtc);
386 
387 	rtc_device_unregister(rtc->rtcdev);
388 
389 	platform_set_drvdata(pdev, NULL);
390 	kfree(rtc);
391 	return 0;
392 }
393 
394 static void at91_rtc_shutdown(struct platform_device *pdev)
395 {
396 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
397 	u32		mr = rtt_readl(rtc, MR);
398 
399 	rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
400 	rtt_writel(rtc, MR, mr & ~rtc->imr);
401 }
402 
403 #ifdef CONFIG_PM
404 
405 /* AT91SAM9 RTC Power management control */
406 
407 static int at91_rtc_suspend(struct platform_device *pdev,
408 					pm_message_t state)
409 {
410 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
411 	u32		mr = rtt_readl(rtc, MR);
412 
413 	/*
414 	 * This IRQ is shared with DBGU and other hardware which isn't
415 	 * necessarily a wakeup event source.
416 	 */
417 	rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
418 	if (rtc->imr) {
419 		if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) {
420 			enable_irq_wake(AT91_ID_SYS);
421 			/* don't let RTTINC cause wakeups */
422 			if (mr & AT91_RTT_RTTINCIEN)
423 				rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
424 		} else
425 			rtt_writel(rtc, MR, mr & ~rtc->imr);
426 	}
427 
428 	return 0;
429 }
430 
431 static int at91_rtc_resume(struct platform_device *pdev)
432 {
433 	struct sam9_rtc	*rtc = platform_get_drvdata(pdev);
434 	u32		mr;
435 
436 	if (rtc->imr) {
437 		if (device_may_wakeup(&pdev->dev))
438 			disable_irq_wake(AT91_ID_SYS);
439 		mr = rtt_readl(rtc, MR);
440 		rtt_writel(rtc, MR, mr | rtc->imr);
441 	}
442 
443 	return 0;
444 }
445 #else
446 #define at91_rtc_suspend	NULL
447 #define at91_rtc_resume		NULL
448 #endif
449 
450 static struct platform_driver at91_rtc_driver = {
451 	.driver.name	= "rtc-at91sam9",
452 	.driver.owner	= THIS_MODULE,
453 	.remove		= __exit_p(at91_rtc_remove),
454 	.shutdown	= at91_rtc_shutdown,
455 	.suspend	= at91_rtc_suspend,
456 	.resume		= at91_rtc_resume,
457 };
458 
459 /* Chips can have more than one RTT module, and they can be used for more
460  * than just RTCs.  So we can't just register as "the" RTT driver.
461  *
462  * A normal approach in such cases is to create a library to allocate and
463  * free the modules.  Here we just use bus_find_device() as like such a
464  * library, binding directly ... no runtime "library" footprint is needed.
465  */
466 static int __init at91_rtc_match(struct device *dev, void *v)
467 {
468 	struct platform_device *pdev = to_platform_device(dev);
469 	int ret;
470 
471 	/* continue searching if this isn't the RTT we need */
472 	if (strcmp("at91_rtt", pdev->name) != 0
473 			|| pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT)
474 		goto fail;
475 
476 	/* else we found it ... but fail unless we can bind to the RTC driver */
477 	if (dev->driver) {
478 		dev_dbg(dev, "busy, can't use as RTC!\n");
479 		goto fail;
480 	}
481 	dev->driver = &at91_rtc_driver.driver;
482 	if (device_attach(dev) == 0) {
483 		dev_dbg(dev, "can't attach RTC!\n");
484 		goto fail;
485 	}
486 	ret = at91_rtc_probe(pdev);
487 	if (ret == 0)
488 		return true;
489 
490 	dev_dbg(dev, "RTC probe err %d!\n", ret);
491 fail:
492 	return false;
493 }
494 
495 static int __init at91_rtc_init(void)
496 {
497 	int status;
498 	struct device *rtc;
499 
500 	status = platform_driver_register(&at91_rtc_driver);
501 	if (status)
502 		return status;
503 	rtc = bus_find_device(&platform_bus_type, NULL,
504 			NULL, at91_rtc_match);
505 	if (!rtc)
506 		platform_driver_unregister(&at91_rtc_driver);
507 	return rtc ? 0 : -ENODEV;
508 }
509 module_init(at91_rtc_init);
510 
511 static void __exit at91_rtc_exit(void)
512 {
513 	platform_driver_unregister(&at91_rtc_driver);
514 }
515 module_exit(at91_rtc_exit);
516 
517 
518 MODULE_AUTHOR("Michel Benoit");
519 MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
520 MODULE_LICENSE("GPL");
521