1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Real Time Clock interface for Linux on Atmel AT91RM9200 4 * 5 * Copyright (C) 2002 Rick Bronson 6 * 7 * Converted to RTC class model by Andrew Victor 8 * 9 * Ported to Linux 2.6 by Steven Scholz 10 * Based on s3c2410-rtc.c Simtec Electronics 11 * 12 * Based on sa1100-rtc.c by Nils Faerber 13 * Based on rtc.c by Paul Gortmaker 14 */ 15 16 #include <linux/bcd.h> 17 #include <linux/bitfield.h> 18 #include <linux/clk.h> 19 #include <linux/completion.h> 20 #include <linux/interrupt.h> 21 #include <linux/ioctl.h> 22 #include <linux/io.h> 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/of.h> 26 #include <linux/platform_device.h> 27 #include <linux/rtc.h> 28 #include <linux/spinlock.h> 29 #include <linux/suspend.h> 30 #include <linux/time.h> 31 #include <linux/uaccess.h> 32 33 #define AT91_RTC_CR 0x00 /* Control Register */ 34 #define AT91_RTC_UPDTIM BIT(0) /* Update Request Time Register */ 35 #define AT91_RTC_UPDCAL BIT(1) /* Update Request Calendar Register */ 36 37 #define AT91_RTC_MR 0x04 /* Mode Register */ 38 #define AT91_RTC_HRMOD BIT(0) /* 12/24 hour mode */ 39 #define AT91_RTC_NEGPPM BIT(4) /* Negative PPM correction */ 40 #define AT91_RTC_CORRECTION GENMASK(14, 8) /* Slow clock correction */ 41 #define AT91_RTC_HIGHPPM BIT(15) /* High PPM correction */ 42 43 #define AT91_RTC_TIMR 0x08 /* Time Register */ 44 #define AT91_RTC_SEC GENMASK(6, 0) /* Current Second */ 45 #define AT91_RTC_MIN GENMASK(14, 8) /* Current Minute */ 46 #define AT91_RTC_HOUR GENMASK(21, 16) /* Current Hour */ 47 #define AT91_RTC_AMPM BIT(22) /* Ante Meridiem Post Meridiem Indicator */ 48 49 #define AT91_RTC_CALR 0x0c /* Calendar Register */ 50 #define AT91_RTC_CENT GENMASK(6, 0) /* Current Century */ 51 #define AT91_RTC_YEAR GENMASK(15, 8) /* Current Year */ 52 #define AT91_RTC_MONTH GENMASK(20, 16) /* Current Month */ 53 #define AT91_RTC_DAY GENMASK(23, 21) /* Current Day */ 54 #define AT91_RTC_DATE GENMASK(29, 24) /* Current Date */ 55 56 #define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ 57 #define AT91_RTC_SECEN BIT(7) /* Second Alarm Enable */ 58 #define AT91_RTC_MINEN BIT(15) /* Minute Alarm Enable */ 59 #define AT91_RTC_HOUREN BIT(23) /* Hour Alarm Enable */ 60 61 #define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ 62 #define AT91_RTC_MTHEN BIT(23) /* Month Alarm Enable */ 63 #define AT91_RTC_DATEEN BIT(31) /* Date Alarm Enable */ 64 65 #define AT91_RTC_SR 0x18 /* Status Register */ 66 #define AT91_RTC_ACKUPD BIT(0) /* Acknowledge for Update */ 67 #define AT91_RTC_ALARM BIT(1) /* Alarm Flag */ 68 #define AT91_RTC_SECEV BIT(2) /* Second Event */ 69 #define AT91_RTC_TIMEV BIT(3) /* Time Event */ 70 #define AT91_RTC_CALEV BIT(4) /* Calendar Event */ 71 72 #define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ 73 #define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ 74 #define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ 75 #define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ 76 77 #define AT91_RTC_VER 0x2c /* Valid Entry Register */ 78 #define AT91_RTC_NVTIM BIT(0) /* Non valid Time */ 79 #define AT91_RTC_NVCAL BIT(1) /* Non valid Calendar */ 80 #define AT91_RTC_NVTIMALR BIT(2) /* Non valid Time Alarm */ 81 #define AT91_RTC_NVCALALR BIT(3) /* Non valid Calendar Alarm */ 82 83 #define AT91_RTC_CORR_DIVIDEND 3906000 84 #define AT91_RTC_CORR_LOW_RATIO 20 85 86 #define at91_rtc_read(field) \ 87 readl_relaxed(at91_rtc_regs + field) 88 #define at91_rtc_write(field, val) \ 89 writel_relaxed((val), at91_rtc_regs + field) 90 91 struct at91_rtc_config { 92 bool use_shadow_imr; 93 bool has_correction; 94 }; 95 96 static const struct at91_rtc_config *at91_rtc_config; 97 static DECLARE_COMPLETION(at91_rtc_updated); 98 static DECLARE_COMPLETION(at91_rtc_upd_rdy); 99 static void __iomem *at91_rtc_regs; 100 static int irq; 101 static DEFINE_SPINLOCK(at91_rtc_lock); 102 static u32 at91_rtc_shadow_imr; 103 static bool suspended; 104 static DEFINE_SPINLOCK(suspended_lock); 105 static unsigned long cached_events; 106 static u32 at91_rtc_imr; 107 static struct clk *sclk; 108 109 static void at91_rtc_write_ier(u32 mask) 110 { 111 unsigned long flags; 112 113 spin_lock_irqsave(&at91_rtc_lock, flags); 114 at91_rtc_shadow_imr |= mask; 115 at91_rtc_write(AT91_RTC_IER, mask); 116 spin_unlock_irqrestore(&at91_rtc_lock, flags); 117 } 118 119 static void at91_rtc_write_idr(u32 mask) 120 { 121 unsigned long flags; 122 123 spin_lock_irqsave(&at91_rtc_lock, flags); 124 at91_rtc_write(AT91_RTC_IDR, mask); 125 /* 126 * Register read back (of any RTC-register) needed to make sure 127 * IDR-register write has reached the peripheral before updating 128 * shadow mask. 129 * 130 * Note that there is still a possibility that the mask is updated 131 * before interrupts have actually been disabled in hardware. The only 132 * way to be certain would be to poll the IMR-register, which is 133 * the very register we are trying to emulate. The register read back 134 * is a reasonable heuristic. 135 */ 136 at91_rtc_read(AT91_RTC_SR); 137 at91_rtc_shadow_imr &= ~mask; 138 spin_unlock_irqrestore(&at91_rtc_lock, flags); 139 } 140 141 static u32 at91_rtc_read_imr(void) 142 { 143 unsigned long flags; 144 u32 mask; 145 146 if (at91_rtc_config->use_shadow_imr) { 147 spin_lock_irqsave(&at91_rtc_lock, flags); 148 mask = at91_rtc_shadow_imr; 149 spin_unlock_irqrestore(&at91_rtc_lock, flags); 150 } else { 151 mask = at91_rtc_read(AT91_RTC_IMR); 152 } 153 154 return mask; 155 } 156 157 /* 158 * Decode time/date into rtc_time structure 159 */ 160 static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg, 161 struct rtc_time *tm) 162 { 163 unsigned int time, date; 164 165 /* must read twice in case it changes */ 166 do { 167 time = at91_rtc_read(timereg); 168 date = at91_rtc_read(calreg); 169 } while ((time != at91_rtc_read(timereg)) || 170 (date != at91_rtc_read(calreg))); 171 172 tm->tm_sec = bcd2bin(FIELD_GET(AT91_RTC_SEC, time)); 173 tm->tm_min = bcd2bin(FIELD_GET(AT91_RTC_MIN, time)); 174 tm->tm_hour = bcd2bin(FIELD_GET(AT91_RTC_HOUR, time)); 175 176 /* 177 * The Calendar Alarm register does not have a field for 178 * the year - so these will return an invalid value. 179 */ 180 tm->tm_year = bcd2bin(date & AT91_RTC_CENT) * 100; /* century */ 181 tm->tm_year += bcd2bin(FIELD_GET(AT91_RTC_YEAR, date)); /* year */ 182 183 tm->tm_wday = bcd2bin(FIELD_GET(AT91_RTC_DAY, date)) - 1; /* day of the week [0-6], Sunday=0 */ 184 tm->tm_mon = bcd2bin(FIELD_GET(AT91_RTC_MONTH, date)) - 1; 185 tm->tm_mday = bcd2bin(FIELD_GET(AT91_RTC_DATE, date)); 186 } 187 188 /* 189 * Read current time and date in RTC 190 */ 191 static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm) 192 { 193 at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, tm); 194 tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); 195 tm->tm_year = tm->tm_year - 1900; 196 197 dev_dbg(dev, "%s(): %ptR\n", __func__, tm); 198 199 return 0; 200 } 201 202 /* 203 * Set current time and date in RTC 204 */ 205 static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) 206 { 207 unsigned long cr; 208 209 dev_dbg(dev, "%s(): %ptR\n", __func__, tm); 210 211 wait_for_completion(&at91_rtc_upd_rdy); 212 213 /* Stop Time/Calendar from counting */ 214 cr = at91_rtc_read(AT91_RTC_CR); 215 at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM); 216 217 at91_rtc_write_ier(AT91_RTC_ACKUPD); 218 wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */ 219 at91_rtc_write_idr(AT91_RTC_ACKUPD); 220 221 at91_rtc_write(AT91_RTC_TIMR, 222 FIELD_PREP(AT91_RTC_SEC, bin2bcd(tm->tm_sec)) 223 | FIELD_PREP(AT91_RTC_MIN, bin2bcd(tm->tm_min)) 224 | FIELD_PREP(AT91_RTC_HOUR, bin2bcd(tm->tm_hour))); 225 226 at91_rtc_write(AT91_RTC_CALR, 227 FIELD_PREP(AT91_RTC_CENT, 228 bin2bcd((tm->tm_year + 1900) / 100)) 229 | FIELD_PREP(AT91_RTC_YEAR, bin2bcd(tm->tm_year % 100)) 230 | FIELD_PREP(AT91_RTC_MONTH, bin2bcd(tm->tm_mon + 1)) 231 | FIELD_PREP(AT91_RTC_DAY, bin2bcd(tm->tm_wday + 1)) 232 | FIELD_PREP(AT91_RTC_DATE, bin2bcd(tm->tm_mday))); 233 234 /* Restart Time/Calendar */ 235 cr = at91_rtc_read(AT91_RTC_CR); 236 at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_SECEV); 237 at91_rtc_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM)); 238 at91_rtc_write_ier(AT91_RTC_SECEV); 239 240 return 0; 241 } 242 243 /* 244 * Read alarm time and date in RTC 245 */ 246 static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) 247 { 248 struct rtc_time *tm = &alrm->time; 249 250 at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm); 251 tm->tm_year = -1; 252 253 alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM) 254 ? 1 : 0; 255 256 dev_dbg(dev, "%s(): %ptR %sabled\n", __func__, tm, 257 alrm->enabled ? "en" : "dis"); 258 259 return 0; 260 } 261 262 /* 263 * Set alarm time and date in RTC 264 */ 265 static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) 266 { 267 struct rtc_time tm = alrm->time; 268 269 at91_rtc_write_idr(AT91_RTC_ALARM); 270 at91_rtc_write(AT91_RTC_TIMALR, 271 FIELD_PREP(AT91_RTC_SEC, bin2bcd(alrm->time.tm_sec)) 272 | FIELD_PREP(AT91_RTC_MIN, bin2bcd(alrm->time.tm_min)) 273 | FIELD_PREP(AT91_RTC_HOUR, bin2bcd(alrm->time.tm_hour)) 274 | AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN); 275 at91_rtc_write(AT91_RTC_CALALR, 276 FIELD_PREP(AT91_RTC_MONTH, bin2bcd(alrm->time.tm_mon + 1)) 277 | FIELD_PREP(AT91_RTC_DATE, bin2bcd(alrm->time.tm_mday)) 278 | AT91_RTC_DATEEN | AT91_RTC_MTHEN); 279 280 if (alrm->enabled) { 281 at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); 282 at91_rtc_write_ier(AT91_RTC_ALARM); 283 } 284 285 dev_dbg(dev, "%s(): %ptR\n", __func__, &tm); 286 287 return 0; 288 } 289 290 static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) 291 { 292 dev_dbg(dev, "%s(): cmd=%08x\n", __func__, enabled); 293 294 if (enabled) { 295 at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); 296 at91_rtc_write_ier(AT91_RTC_ALARM); 297 } else 298 at91_rtc_write_idr(AT91_RTC_ALARM); 299 300 return 0; 301 } 302 303 static int at91_rtc_readoffset(struct device *dev, long *offset) 304 { 305 u32 mr = at91_rtc_read(AT91_RTC_MR); 306 long val = FIELD_GET(AT91_RTC_CORRECTION, mr); 307 308 if (!val) { 309 *offset = 0; 310 return 0; 311 } 312 313 val++; 314 315 if (!(mr & AT91_RTC_NEGPPM)) 316 val = -val; 317 318 if (!(mr & AT91_RTC_HIGHPPM)) 319 val *= AT91_RTC_CORR_LOW_RATIO; 320 321 *offset = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, val); 322 323 return 0; 324 } 325 326 static int at91_rtc_setoffset(struct device *dev, long offset) 327 { 328 long corr; 329 u32 mr; 330 331 if (offset > AT91_RTC_CORR_DIVIDEND / 2) 332 return -ERANGE; 333 if (offset < -AT91_RTC_CORR_DIVIDEND / 2) 334 return -ERANGE; 335 336 mr = at91_rtc_read(AT91_RTC_MR); 337 mr &= ~(AT91_RTC_NEGPPM | AT91_RTC_CORRECTION | AT91_RTC_HIGHPPM); 338 339 if (offset > 0) 340 mr |= AT91_RTC_NEGPPM; 341 else 342 offset = -offset; 343 344 /* offset less than 764 ppb, disable correction*/ 345 if (offset < 764) { 346 at91_rtc_write(AT91_RTC_MR, mr & ~AT91_RTC_NEGPPM); 347 348 return 0; 349 } 350 351 /* 352 * 29208 ppb is the perfect cutoff between low range and high range 353 * low range values are never better than high range value after that. 354 */ 355 if (offset < 29208) { 356 corr = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, offset * AT91_RTC_CORR_LOW_RATIO); 357 } else { 358 corr = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, offset); 359 mr |= AT91_RTC_HIGHPPM; 360 } 361 362 if (corr > 128) 363 corr = 128; 364 365 mr |= FIELD_PREP(AT91_RTC_CORRECTION, corr - 1); 366 367 at91_rtc_write(AT91_RTC_MR, mr); 368 369 return 0; 370 } 371 372 /* 373 * IRQ handler for the RTC 374 */ 375 static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) 376 { 377 struct platform_device *pdev = dev_id; 378 struct rtc_device *rtc = platform_get_drvdata(pdev); 379 unsigned int rtsr; 380 unsigned long events = 0; 381 int ret = IRQ_NONE; 382 383 spin_lock(&suspended_lock); 384 rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read_imr(); 385 if (rtsr) { /* this interrupt is shared! Is it ours? */ 386 if (rtsr & AT91_RTC_ALARM) 387 events |= (RTC_AF | RTC_IRQF); 388 if (rtsr & AT91_RTC_SECEV) { 389 complete(&at91_rtc_upd_rdy); 390 at91_rtc_write_idr(AT91_RTC_SECEV); 391 } 392 if (rtsr & AT91_RTC_ACKUPD) 393 complete(&at91_rtc_updated); 394 395 at91_rtc_write(AT91_RTC_SCCR, rtsr); /* clear status reg */ 396 397 if (!suspended) { 398 rtc_update_irq(rtc, 1, events); 399 400 dev_dbg(&pdev->dev, "%s(): num=%ld, events=0x%02lx\n", 401 __func__, events >> 8, events & 0x000000FF); 402 } else { 403 cached_events |= events; 404 at91_rtc_write_idr(at91_rtc_imr); 405 pm_system_wakeup(); 406 } 407 408 ret = IRQ_HANDLED; 409 } 410 spin_unlock(&suspended_lock); 411 412 return ret; 413 } 414 415 static const struct at91_rtc_config at91rm9200_config = { 416 }; 417 418 static const struct at91_rtc_config at91sam9x5_config = { 419 .use_shadow_imr = true, 420 }; 421 422 static const struct at91_rtc_config sama5d4_config = { 423 .has_correction = true, 424 }; 425 426 static const struct of_device_id at91_rtc_dt_ids[] = { 427 { 428 .compatible = "atmel,at91rm9200-rtc", 429 .data = &at91rm9200_config, 430 }, { 431 .compatible = "atmel,at91sam9x5-rtc", 432 .data = &at91sam9x5_config, 433 }, { 434 .compatible = "atmel,sama5d4-rtc", 435 .data = &sama5d4_config, 436 }, { 437 .compatible = "atmel,sama5d2-rtc", 438 .data = &sama5d4_config, 439 }, { 440 .compatible = "microchip,sam9x60-rtc", 441 .data = &sama5d4_config, 442 }, { 443 /* sentinel */ 444 } 445 }; 446 MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); 447 448 static const struct rtc_class_ops at91_rtc_ops = { 449 .read_time = at91_rtc_readtime, 450 .set_time = at91_rtc_settime, 451 .read_alarm = at91_rtc_readalarm, 452 .set_alarm = at91_rtc_setalarm, 453 .alarm_irq_enable = at91_rtc_alarm_irq_enable, 454 }; 455 456 static const struct rtc_class_ops sama5d4_rtc_ops = { 457 .read_time = at91_rtc_readtime, 458 .set_time = at91_rtc_settime, 459 .read_alarm = at91_rtc_readalarm, 460 .set_alarm = at91_rtc_setalarm, 461 .alarm_irq_enable = at91_rtc_alarm_irq_enable, 462 .set_offset = at91_rtc_setoffset, 463 .read_offset = at91_rtc_readoffset, 464 }; 465 466 /* 467 * Initialize and install RTC driver 468 */ 469 static int __init at91_rtc_probe(struct platform_device *pdev) 470 { 471 struct rtc_device *rtc; 472 struct resource *regs; 473 int ret = 0; 474 475 at91_rtc_config = of_device_get_match_data(&pdev->dev); 476 if (!at91_rtc_config) 477 return -ENODEV; 478 479 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); 480 if (!regs) { 481 dev_err(&pdev->dev, "no mmio resource defined\n"); 482 return -ENXIO; 483 } 484 485 irq = platform_get_irq(pdev, 0); 486 if (irq < 0) 487 return -ENXIO; 488 489 at91_rtc_regs = devm_ioremap(&pdev->dev, regs->start, 490 resource_size(regs)); 491 if (!at91_rtc_regs) { 492 dev_err(&pdev->dev, "failed to map registers, aborting.\n"); 493 return -ENOMEM; 494 } 495 496 rtc = devm_rtc_allocate_device(&pdev->dev); 497 if (IS_ERR(rtc)) 498 return PTR_ERR(rtc); 499 platform_set_drvdata(pdev, rtc); 500 501 sclk = devm_clk_get(&pdev->dev, NULL); 502 if (IS_ERR(sclk)) 503 return PTR_ERR(sclk); 504 505 ret = clk_prepare_enable(sclk); 506 if (ret) { 507 dev_err(&pdev->dev, "Could not enable slow clock\n"); 508 return ret; 509 } 510 511 at91_rtc_write(AT91_RTC_CR, 0); 512 at91_rtc_write(AT91_RTC_MR, at91_rtc_read(AT91_RTC_MR) & ~AT91_RTC_HRMOD); 513 514 /* Disable all interrupts */ 515 at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | 516 AT91_RTC_SECEV | AT91_RTC_TIMEV | 517 AT91_RTC_CALEV); 518 519 ret = devm_request_irq(&pdev->dev, irq, at91_rtc_interrupt, 520 IRQF_SHARED | IRQF_COND_SUSPEND, 521 "at91_rtc", pdev); 522 if (ret) { 523 dev_err(&pdev->dev, "IRQ %d already in use.\n", irq); 524 goto err_clk; 525 } 526 527 /* cpu init code should really have flagged this device as 528 * being wake-capable; if it didn't, do that here. 529 */ 530 if (!device_can_wakeup(&pdev->dev)) 531 device_init_wakeup(&pdev->dev, 1); 532 533 if (at91_rtc_config->has_correction) 534 rtc->ops = &sama5d4_rtc_ops; 535 else 536 rtc->ops = &at91_rtc_ops; 537 538 rtc->range_min = RTC_TIMESTAMP_BEGIN_1900; 539 rtc->range_max = RTC_TIMESTAMP_END_2099; 540 ret = devm_rtc_register_device(rtc); 541 if (ret) 542 goto err_clk; 543 544 /* enable SECEV interrupt in order to initialize at91_rtc_upd_rdy 545 * completion. 546 */ 547 at91_rtc_write_ier(AT91_RTC_SECEV); 548 549 dev_info(&pdev->dev, "AT91 Real Time Clock driver.\n"); 550 return 0; 551 552 err_clk: 553 clk_disable_unprepare(sclk); 554 555 return ret; 556 } 557 558 /* 559 * Disable and remove the RTC driver 560 */ 561 static void __exit at91_rtc_remove(struct platform_device *pdev) 562 { 563 /* Disable all interrupts */ 564 at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | 565 AT91_RTC_SECEV | AT91_RTC_TIMEV | 566 AT91_RTC_CALEV); 567 568 clk_disable_unprepare(sclk); 569 } 570 571 static void at91_rtc_shutdown(struct platform_device *pdev) 572 { 573 /* Disable all interrupts */ 574 at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | 575 AT91_RTC_SECEV | AT91_RTC_TIMEV | 576 AT91_RTC_CALEV); 577 } 578 579 #ifdef CONFIG_PM_SLEEP 580 581 /* AT91RM9200 RTC Power management control */ 582 583 static int at91_rtc_suspend(struct device *dev) 584 { 585 /* this IRQ is shared with DBGU and other hardware which isn't 586 * necessarily doing PM like we are... 587 */ 588 at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); 589 590 at91_rtc_imr = at91_rtc_read_imr() 591 & (AT91_RTC_ALARM|AT91_RTC_SECEV); 592 if (at91_rtc_imr) { 593 if (device_may_wakeup(dev)) { 594 unsigned long flags; 595 596 enable_irq_wake(irq); 597 598 spin_lock_irqsave(&suspended_lock, flags); 599 suspended = true; 600 spin_unlock_irqrestore(&suspended_lock, flags); 601 } else { 602 at91_rtc_write_idr(at91_rtc_imr); 603 } 604 } 605 return 0; 606 } 607 608 static int at91_rtc_resume(struct device *dev) 609 { 610 struct rtc_device *rtc = dev_get_drvdata(dev); 611 612 if (at91_rtc_imr) { 613 if (device_may_wakeup(dev)) { 614 unsigned long flags; 615 616 spin_lock_irqsave(&suspended_lock, flags); 617 618 if (cached_events) { 619 rtc_update_irq(rtc, 1, cached_events); 620 cached_events = 0; 621 } 622 623 suspended = false; 624 spin_unlock_irqrestore(&suspended_lock, flags); 625 626 disable_irq_wake(irq); 627 } 628 at91_rtc_write_ier(at91_rtc_imr); 629 } 630 return 0; 631 } 632 #endif 633 634 static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); 635 636 /* 637 * at91_rtc_remove() lives in .exit.text. For drivers registered via 638 * module_platform_driver_probe() this is ok because they cannot get unbound at 639 * runtime. So mark the driver struct with __refdata to prevent modpost 640 * triggering a section mismatch warning. 641 */ 642 static struct platform_driver at91_rtc_driver __refdata = { 643 .remove_new = __exit_p(at91_rtc_remove), 644 .shutdown = at91_rtc_shutdown, 645 .driver = { 646 .name = "at91_rtc", 647 .pm = &at91_rtc_pm_ops, 648 .of_match_table = at91_rtc_dt_ids, 649 }, 650 }; 651 652 module_platform_driver_probe(at91_rtc_driver, at91_rtc_probe); 653 654 MODULE_AUTHOR("Rick Bronson"); 655 MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200"); 656 MODULE_LICENSE("GPL"); 657 MODULE_ALIAS("platform:at91_rtc"); 658