xref: /linux/drivers/reset/reset-socfpga.c (revision fd7d598270724cc787982ea48bbe17ad383a8b7f)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2018, Intel Corporation
4  * Copied from reset-sunxi.c
5  */
6 
7 #include <linux/err.h>
8 #include <linux/io.h>
9 #include <linux/init.h>
10 #include <linux/of.h>
11 #include <linux/of_address.h>
12 #include <linux/platform_device.h>
13 #include <linux/reset-controller.h>
14 #include <linux/reset/reset-simple.h>
15 #include <linux/reset/socfpga.h>
16 #include <linux/slab.h>
17 #include <linux/spinlock.h>
18 #include <linux/types.h>
19 
20 #define SOCFPGA_NR_BANKS	8
21 
22 static int a10_reset_init(struct device_node *np)
23 {
24 	struct reset_simple_data *data;
25 	struct resource res;
26 	resource_size_t size;
27 	int ret;
28 	u32 reg_offset = 0x10;
29 
30 	data = kzalloc(sizeof(*data), GFP_KERNEL);
31 	if (!data)
32 		return -ENOMEM;
33 
34 	ret = of_address_to_resource(np, 0, &res);
35 	if (ret)
36 		goto err_alloc;
37 
38 	size = resource_size(&res);
39 	if (!request_mem_region(res.start, size, np->name)) {
40 		ret = -EBUSY;
41 		goto err_alloc;
42 	}
43 
44 	data->membase = ioremap(res.start, size);
45 	if (!data->membase) {
46 		ret = -ENOMEM;
47 		goto release_region;
48 	}
49 
50 	if (of_property_read_u32(np, "altr,modrst-offset", &reg_offset))
51 		pr_warn("missing altr,modrst-offset property, assuming 0x10\n");
52 	data->membase += reg_offset;
53 
54 	spin_lock_init(&data->lock);
55 
56 	data->rcdev.owner = THIS_MODULE;
57 	data->rcdev.nr_resets = SOCFPGA_NR_BANKS * 32;
58 	data->rcdev.ops = &reset_simple_ops;
59 	data->rcdev.of_node = np;
60 	data->status_active_low = true;
61 
62 	ret = reset_controller_register(&data->rcdev);
63 	if (ret)
64 		pr_err("unable to register device\n");
65 
66 	return ret;
67 
68 release_region:
69 	release_mem_region(res.start, size);
70 
71 err_alloc:
72 	kfree(data);
73 	return ret;
74 };
75 
76 /*
77  * These are the reset controller we need to initialize early on in
78  * our system, before we can even think of using a regular device
79  * driver for it.
80  * The controllers that we can register through the regular device
81  * model are handled by the simple reset driver directly.
82  */
83 static const struct of_device_id socfpga_early_reset_dt_ids[] __initconst = {
84 	{ .compatible = "altr,rst-mgr", },
85 	{ /* sentinel */ },
86 };
87 
88 void __init socfpga_reset_init(void)
89 {
90 	struct device_node *np;
91 
92 	for_each_matching_node(np, socfpga_early_reset_dt_ids)
93 		a10_reset_init(np);
94 }
95 
96 /*
97  * The early driver is problematic, because it doesn't register
98  * itself as a driver. This causes certain device links to prevent
99  * consumer devices from probing. The hacky solution is to register
100  * an empty driver, whose only job is to attach itself to the reset
101  * manager and call probe.
102  */
103 static const struct of_device_id socfpga_reset_dt_ids[] = {
104 	{ .compatible = "altr,rst-mgr", },
105 	{ /* sentinel */ },
106 };
107 
108 static int reset_simple_probe(struct platform_device *pdev)
109 {
110 	return 0;
111 }
112 
113 static struct platform_driver reset_socfpga_driver = {
114 	.probe	= reset_simple_probe,
115 	.driver = {
116 		.name		= "socfpga-reset",
117 		.of_match_table	= socfpga_reset_dt_ids,
118 	},
119 };
120 builtin_platform_driver(reset_socfpga_driver);
121