xref: /linux/drivers/remoteproc/da8xx_remoteproc.c (revision 26fbb4c8c7c3ee9a4c3b4de555a8587b5a19154e)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Remote processor machine-specific module for DA8XX
4  *
5  * Copyright (C) 2013 Texas Instruments, Inc.
6  */
7 
8 #include <linux/bitops.h>
9 #include <linux/clk.h>
10 #include <linux/reset.h>
11 #include <linux/err.h>
12 #include <linux/interrupt.h>
13 #include <linux/io.h>
14 #include <linux/irq.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/of_reserved_mem.h>
18 #include <linux/platform_device.h>
19 #include <linux/remoteproc.h>
20 
21 #include "remoteproc_internal.h"
22 
23 static char *da8xx_fw_name;
24 module_param(da8xx_fw_name, charp, 0444);
25 MODULE_PARM_DESC(da8xx_fw_name,
26 		 "Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')");
27 
28 /*
29  * OMAP-L138 Technical References:
30  * http://www.ti.com/product/omap-l138
31  */
32 #define SYSCFG_CHIPSIG0 BIT(0)
33 #define SYSCFG_CHIPSIG1 BIT(1)
34 #define SYSCFG_CHIPSIG2 BIT(2)
35 #define SYSCFG_CHIPSIG3 BIT(3)
36 #define SYSCFG_CHIPSIG4 BIT(4)
37 
38 #define DA8XX_RPROC_LOCAL_ADDRESS_MASK	(SZ_16M - 1)
39 
40 /**
41  * struct da8xx_rproc_mem - internal memory structure
42  * @cpu_addr: MPU virtual address of the memory region
43  * @bus_addr: Bus address used to access the memory region
44  * @dev_addr: Device address of the memory region from DSP view
45  * @size: Size of the memory region
46  */
47 struct da8xx_rproc_mem {
48 	void __iomem *cpu_addr;
49 	phys_addr_t bus_addr;
50 	u32 dev_addr;
51 	size_t size;
52 };
53 
54 /**
55  * struct da8xx_rproc - da8xx remote processor instance state
56  * @rproc: rproc handle
57  * @mem: internal memory regions data
58  * @num_mems: number of internal memory regions
59  * @dsp_clk: placeholder for platform's DSP clk
60  * @ack_fxn: chip-specific ack function for ack'ing irq
61  * @irq_data: ack_fxn function parameter
62  * @chipsig: virt ptr to DSP interrupt registers (CHIPSIG & CHIPSIG_CLR)
63  * @bootreg: virt ptr to DSP boot address register (HOST1CFG)
64  * @irq: irq # used by this instance
65  */
66 struct da8xx_rproc {
67 	struct rproc *rproc;
68 	struct da8xx_rproc_mem *mem;
69 	int num_mems;
70 	struct clk *dsp_clk;
71 	struct reset_control *dsp_reset;
72 	void (*ack_fxn)(struct irq_data *data);
73 	struct irq_data *irq_data;
74 	void __iomem *chipsig;
75 	void __iomem *bootreg;
76 	int irq;
77 };
78 
79 /**
80  * handle_event() - inbound virtqueue message workqueue function
81  *
82  * This function is registered as a kernel thread and is scheduled by the
83  * kernel handler.
84  */
85 static irqreturn_t handle_event(int irq, void *p)
86 {
87 	struct rproc *rproc = (struct rproc *)p;
88 
89 	/* Process incoming buffers on all our vrings */
90 	rproc_vq_interrupt(rproc, 0);
91 	rproc_vq_interrupt(rproc, 1);
92 
93 	return IRQ_HANDLED;
94 }
95 
96 /**
97  * da8xx_rproc_callback() - inbound virtqueue message handler
98  *
99  * This handler is invoked directly by the kernel whenever the remote
100  * core (DSP) has modified the state of a virtqueue.  There is no
101  * "payload" message indicating the virtqueue index as is the case with
102  * mailbox-based implementations on OMAP4.  As such, this handler "polls"
103  * each known virtqueue index for every invocation.
104  */
105 static irqreturn_t da8xx_rproc_callback(int irq, void *p)
106 {
107 	struct rproc *rproc = (struct rproc *)p;
108 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
109 	u32 chipsig;
110 
111 	chipsig = readl(drproc->chipsig);
112 	if (chipsig & SYSCFG_CHIPSIG0) {
113 		/* Clear interrupt level source */
114 		writel(SYSCFG_CHIPSIG0, drproc->chipsig + 4);
115 
116 		/*
117 		 * ACK intr to AINTC.
118 		 *
119 		 * It has already been ack'ed by the kernel before calling
120 		 * this function, but since the ARM<->DSP interrupts in the
121 		 * CHIPSIG register are "level" instead of "pulse" variety,
122 		 * we need to ack it after taking down the level else we'll
123 		 * be called again immediately after returning.
124 		 */
125 		drproc->ack_fxn(drproc->irq_data);
126 
127 		return IRQ_WAKE_THREAD;
128 	}
129 
130 	return IRQ_HANDLED;
131 }
132 
133 static int da8xx_rproc_start(struct rproc *rproc)
134 {
135 	struct device *dev = rproc->dev.parent;
136 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
137 	struct clk *dsp_clk = drproc->dsp_clk;
138 	struct reset_control *dsp_reset = drproc->dsp_reset;
139 	int ret;
140 
141 	/* hw requires the start (boot) address be on 1KB boundary */
142 	if (rproc->bootaddr & 0x3ff) {
143 		dev_err(dev, "invalid boot address: must be aligned to 1KB\n");
144 
145 		return -EINVAL;
146 	}
147 
148 	writel(rproc->bootaddr, drproc->bootreg);
149 
150 	ret = clk_prepare_enable(dsp_clk);
151 	if (ret) {
152 		dev_err(dev, "clk_prepare_enable() failed: %d\n", ret);
153 		return ret;
154 	}
155 
156 	ret = reset_control_deassert(dsp_reset);
157 	if (ret) {
158 		dev_err(dev, "reset_control_deassert() failed: %d\n", ret);
159 		clk_disable_unprepare(dsp_clk);
160 		return ret;
161 	}
162 
163 	return 0;
164 }
165 
166 static int da8xx_rproc_stop(struct rproc *rproc)
167 {
168 	struct da8xx_rproc *drproc = rproc->priv;
169 	struct device *dev = rproc->dev.parent;
170 	int ret;
171 
172 	ret = reset_control_assert(drproc->dsp_reset);
173 	if (ret) {
174 		dev_err(dev, "reset_control_assert() failed: %d\n", ret);
175 		return ret;
176 	}
177 
178 	clk_disable_unprepare(drproc->dsp_clk);
179 
180 	return 0;
181 }
182 
183 /* kick a virtqueue */
184 static void da8xx_rproc_kick(struct rproc *rproc, int vqid)
185 {
186 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
187 
188 	/* Interrupt remote proc */
189 	writel(SYSCFG_CHIPSIG2, drproc->chipsig);
190 }
191 
192 static const struct rproc_ops da8xx_rproc_ops = {
193 	.start = da8xx_rproc_start,
194 	.stop = da8xx_rproc_stop,
195 	.kick = da8xx_rproc_kick,
196 };
197 
198 static int da8xx_rproc_get_internal_memories(struct platform_device *pdev,
199 					     struct da8xx_rproc *drproc)
200 {
201 	static const char * const mem_names[] = {"l2sram", "l1pram", "l1dram"};
202 	int num_mems = ARRAY_SIZE(mem_names);
203 	struct device *dev = &pdev->dev;
204 	struct resource *res;
205 	int i;
206 
207 	drproc->mem = devm_kcalloc(dev, num_mems, sizeof(*drproc->mem),
208 				   GFP_KERNEL);
209 	if (!drproc->mem)
210 		return -ENOMEM;
211 
212 	for (i = 0; i < num_mems; i++) {
213 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
214 						   mem_names[i]);
215 		drproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
216 		if (IS_ERR(drproc->mem[i].cpu_addr)) {
217 			dev_err(dev, "failed to parse and map %s memory\n",
218 				mem_names[i]);
219 			return PTR_ERR(drproc->mem[i].cpu_addr);
220 		}
221 		drproc->mem[i].bus_addr = res->start;
222 		drproc->mem[i].dev_addr =
223 				res->start & DA8XX_RPROC_LOCAL_ADDRESS_MASK;
224 		drproc->mem[i].size = resource_size(res);
225 
226 		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %p da 0x%x\n",
227 			mem_names[i], &drproc->mem[i].bus_addr,
228 			drproc->mem[i].size, drproc->mem[i].cpu_addr,
229 			drproc->mem[i].dev_addr);
230 	}
231 	drproc->num_mems = num_mems;
232 
233 	return 0;
234 }
235 
236 static int da8xx_rproc_probe(struct platform_device *pdev)
237 {
238 	struct device *dev = &pdev->dev;
239 	struct da8xx_rproc *drproc;
240 	struct rproc *rproc;
241 	struct irq_data *irq_data;
242 	struct resource *bootreg_res;
243 	struct resource *chipsig_res;
244 	struct clk *dsp_clk;
245 	struct reset_control *dsp_reset;
246 	void __iomem *chipsig;
247 	void __iomem *bootreg;
248 	int irq;
249 	int ret;
250 
251 	irq = platform_get_irq(pdev, 0);
252 	if (irq < 0)
253 		return irq;
254 
255 	irq_data = irq_get_irq_data(irq);
256 	if (!irq_data) {
257 		dev_err(dev, "irq_get_irq_data(%d): NULL\n", irq);
258 		return -EINVAL;
259 	}
260 
261 	bootreg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
262 						   "host1cfg");
263 	bootreg = devm_ioremap_resource(dev, bootreg_res);
264 	if (IS_ERR(bootreg))
265 		return PTR_ERR(bootreg);
266 
267 	chipsig_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
268 						   "chipsig");
269 	chipsig = devm_ioremap_resource(dev, chipsig_res);
270 	if (IS_ERR(chipsig))
271 		return PTR_ERR(chipsig);
272 
273 	dsp_clk = devm_clk_get(dev, NULL);
274 	if (IS_ERR(dsp_clk)) {
275 		dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
276 
277 		return PTR_ERR(dsp_clk);
278 	}
279 
280 	dsp_reset = devm_reset_control_get_exclusive(dev, NULL);
281 	if (IS_ERR(dsp_reset)) {
282 		if (PTR_ERR(dsp_reset) != -EPROBE_DEFER)
283 			dev_err(dev, "unable to get reset control: %ld\n",
284 				PTR_ERR(dsp_reset));
285 
286 		return PTR_ERR(dsp_reset);
287 	}
288 
289 	if (dev->of_node) {
290 		ret = of_reserved_mem_device_init(dev);
291 		if (ret) {
292 			dev_err(dev, "device does not have specific CMA pool: %d\n",
293 				ret);
294 			return ret;
295 		}
296 	}
297 
298 	rproc = rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name,
299 		sizeof(*drproc));
300 	if (!rproc) {
301 		ret = -ENOMEM;
302 		goto free_mem;
303 	}
304 
305 	/* error recovery is not supported at present */
306 	rproc->recovery_disabled = true;
307 
308 	drproc = rproc->priv;
309 	drproc->rproc = rproc;
310 	drproc->dsp_clk = dsp_clk;
311 	drproc->dsp_reset = dsp_reset;
312 	rproc->has_iommu = false;
313 
314 	ret = da8xx_rproc_get_internal_memories(pdev, drproc);
315 	if (ret)
316 		goto free_rproc;
317 
318 	platform_set_drvdata(pdev, rproc);
319 
320 	/* everything the ISR needs is now setup, so hook it up */
321 	ret = devm_request_threaded_irq(dev, irq, da8xx_rproc_callback,
322 					handle_event, 0, "da8xx-remoteproc",
323 					rproc);
324 	if (ret) {
325 		dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
326 		goto free_rproc;
327 	}
328 
329 	/*
330 	 * rproc_add() can end up enabling the DSP's clk with the DSP
331 	 * *not* in reset, but da8xx_rproc_start() needs the DSP to be
332 	 * held in reset at the time it is called.
333 	 */
334 	ret = reset_control_assert(dsp_reset);
335 	if (ret)
336 		goto free_rproc;
337 
338 	drproc->chipsig = chipsig;
339 	drproc->bootreg = bootreg;
340 	drproc->ack_fxn = irq_data->chip->irq_ack;
341 	drproc->irq_data = irq_data;
342 	drproc->irq = irq;
343 
344 	ret = rproc_add(rproc);
345 	if (ret) {
346 		dev_err(dev, "rproc_add failed: %d\n", ret);
347 		goto free_rproc;
348 	}
349 
350 	return 0;
351 
352 free_rproc:
353 	rproc_free(rproc);
354 free_mem:
355 	if (dev->of_node)
356 		of_reserved_mem_device_release(dev);
357 	return ret;
358 }
359 
360 static int da8xx_rproc_remove(struct platform_device *pdev)
361 {
362 	struct rproc *rproc = platform_get_drvdata(pdev);
363 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
364 	struct device *dev = &pdev->dev;
365 
366 	/*
367 	 * The devm subsystem might end up releasing things before
368 	 * freeing the irq, thus allowing an interrupt to sneak in while
369 	 * the device is being removed.  This should prevent that.
370 	 */
371 	disable_irq(drproc->irq);
372 
373 	rproc_del(rproc);
374 	rproc_free(rproc);
375 	if (dev->of_node)
376 		of_reserved_mem_device_release(dev);
377 
378 	return 0;
379 }
380 
381 static const struct of_device_id davinci_rproc_of_match[] __maybe_unused = {
382 	{ .compatible = "ti,da850-dsp", },
383 	{ /* sentinel */ },
384 };
385 MODULE_DEVICE_TABLE(of, davinci_rproc_of_match);
386 
387 static struct platform_driver da8xx_rproc_driver = {
388 	.probe = da8xx_rproc_probe,
389 	.remove = da8xx_rproc_remove,
390 	.driver = {
391 		.name = "davinci-rproc",
392 		.of_match_table = of_match_ptr(davinci_rproc_of_match),
393 	},
394 };
395 
396 module_platform_driver(da8xx_rproc_driver);
397 
398 MODULE_LICENSE("GPL v2");
399 MODULE_DESCRIPTION("DA8XX Remote Processor control driver");
400