1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (C) STMicroelectronics 2018 3 // Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics. 4 5 #include <linux/interrupt.h> 6 #include <linux/mfd/stpmic1.h> 7 #include <linux/module.h> 8 #include <linux/of_irq.h> 9 #include <linux/platform_device.h> 10 #include <linux/regmap.h> 11 #include <linux/regulator/driver.h> 12 #include <linux/regulator/machine.h> 13 #include <linux/regulator/of_regulator.h> 14 15 #include <dt-bindings/mfd/st,stpmic1.h> 16 17 /** 18 * struct stpmic1 regulator description: this structure is used as driver data 19 * @desc: regulator framework description 20 * @mask_reset_reg: mask reset register address 21 * @mask_reset_mask: mask rank and mask reset register mask 22 * @icc_reg: icc register address 23 * @icc_mask: icc register mask 24 */ 25 struct stpmic1_regulator_cfg { 26 struct regulator_desc desc; 27 u8 mask_reset_reg; 28 u8 mask_reset_mask; 29 u8 icc_reg; 30 u8 icc_mask; 31 }; 32 33 static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode); 34 static unsigned int stpmic1_get_mode(struct regulator_dev *rdev); 35 static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity, 36 bool enable); 37 static unsigned int stpmic1_map_mode(unsigned int mode); 38 39 enum { 40 STPMIC1_BUCK1 = 0, 41 STPMIC1_BUCK2 = 1, 42 STPMIC1_BUCK3 = 2, 43 STPMIC1_BUCK4 = 3, 44 STPMIC1_LDO1 = 4, 45 STPMIC1_LDO2 = 5, 46 STPMIC1_LDO3 = 6, 47 STPMIC1_LDO4 = 7, 48 STPMIC1_LDO5 = 8, 49 STPMIC1_LDO6 = 9, 50 STPMIC1_VREF_DDR = 10, 51 STPMIC1_BOOST = 11, 52 STPMIC1_VBUS_OTG = 12, 53 STPMIC1_SW_OUT = 13, 54 }; 55 56 /* Enable time worst case is 5000mV/(2250uV/uS) */ 57 #define PMIC_ENABLE_TIME_US 2200 58 /* Ramp delay worst case is (2250uV/uS) */ 59 #define PMIC_RAMP_DELAY 2200 60 61 static const struct linear_range buck1_ranges[] = { 62 REGULATOR_LINEAR_RANGE(725000, 0, 4, 0), 63 REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000), 64 REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0), 65 }; 66 67 static const struct linear_range buck2_ranges[] = { 68 REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0), 69 REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0), 70 REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0), 71 REGULATOR_LINEAR_RANGE(1150000, 22, 23, 0), 72 REGULATOR_LINEAR_RANGE(1200000, 24, 25, 0), 73 REGULATOR_LINEAR_RANGE(1250000, 26, 27, 0), 74 REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), 75 REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), 76 REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0), 77 REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0), 78 REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0), 79 }; 80 81 static const struct linear_range buck3_ranges[] = { 82 REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0), 83 REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0), 84 REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0), 85 REGULATOR_LINEAR_RANGE(1300000, 28, 31, 0), 86 REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0), 87 REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000), 88 REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0), 89 }; 90 91 static const struct linear_range buck4_ranges[] = { 92 REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000), 93 REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), 94 REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), 95 REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0), 96 REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0), 97 REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000), 98 REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0), 99 }; 100 101 static const struct linear_range ldo1_ranges[] = { 102 REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), 103 REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), 104 REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), 105 }; 106 107 static const struct linear_range ldo2_ranges[] = { 108 REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), 109 REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), 110 REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), 111 }; 112 113 static const struct linear_range ldo3_ranges[] = { 114 REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), 115 REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), 116 REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), 117 /* with index 31 LDO3 is in DDR mode */ 118 REGULATOR_LINEAR_RANGE(500000, 31, 31, 0), 119 }; 120 121 static const struct linear_range ldo5_ranges[] = { 122 REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), 123 REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000), 124 REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0), 125 }; 126 127 static const struct linear_range ldo6_ranges[] = { 128 REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000), 129 REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), 130 }; 131 132 static const struct regulator_ops stpmic1_ldo_ops = { 133 .list_voltage = regulator_list_voltage_linear_range, 134 .map_voltage = regulator_map_voltage_linear_range, 135 .is_enabled = regulator_is_enabled_regmap, 136 .enable = regulator_enable_regmap, 137 .disable = regulator_disable_regmap, 138 .get_voltage_sel = regulator_get_voltage_sel_regmap, 139 .set_voltage_sel = regulator_set_voltage_sel_regmap, 140 .set_over_current_protection = stpmic1_set_icc, 141 }; 142 143 static const struct regulator_ops stpmic1_ldo3_ops = { 144 .list_voltage = regulator_list_voltage_linear_range, 145 .map_voltage = regulator_map_voltage_iterate, 146 .is_enabled = regulator_is_enabled_regmap, 147 .enable = regulator_enable_regmap, 148 .disable = regulator_disable_regmap, 149 .get_voltage_sel = regulator_get_voltage_sel_regmap, 150 .set_voltage_sel = regulator_set_voltage_sel_regmap, 151 .get_bypass = regulator_get_bypass_regmap, 152 .set_bypass = regulator_set_bypass_regmap, 153 .set_over_current_protection = stpmic1_set_icc, 154 }; 155 156 static const struct regulator_ops stpmic1_ldo4_fixed_regul_ops = { 157 .is_enabled = regulator_is_enabled_regmap, 158 .enable = regulator_enable_regmap, 159 .disable = regulator_disable_regmap, 160 .set_over_current_protection = stpmic1_set_icc, 161 }; 162 163 static const struct regulator_ops stpmic1_buck_ops = { 164 .list_voltage = regulator_list_voltage_linear_range, 165 .map_voltage = regulator_map_voltage_linear_range, 166 .is_enabled = regulator_is_enabled_regmap, 167 .enable = regulator_enable_regmap, 168 .disable = regulator_disable_regmap, 169 .get_voltage_sel = regulator_get_voltage_sel_regmap, 170 .set_voltage_sel = regulator_set_voltage_sel_regmap, 171 .set_pull_down = regulator_set_pull_down_regmap, 172 .set_mode = stpmic1_set_mode, 173 .get_mode = stpmic1_get_mode, 174 .set_over_current_protection = stpmic1_set_icc, 175 }; 176 177 static const struct regulator_ops stpmic1_vref_ddr_ops = { 178 .is_enabled = regulator_is_enabled_regmap, 179 .enable = regulator_enable_regmap, 180 .disable = regulator_disable_regmap, 181 }; 182 183 static const struct regulator_ops stpmic1_boost_regul_ops = { 184 .is_enabled = regulator_is_enabled_regmap, 185 .enable = regulator_enable_regmap, 186 .disable = regulator_disable_regmap, 187 .set_over_current_protection = stpmic1_set_icc, 188 }; 189 190 static const struct regulator_ops stpmic1_switch_regul_ops = { 191 .is_enabled = regulator_is_enabled_regmap, 192 .enable = regulator_enable_regmap, 193 .disable = regulator_disable_regmap, 194 .set_over_current_protection = stpmic1_set_icc, 195 .set_active_discharge = regulator_set_active_discharge_regmap, 196 }; 197 198 #define REG_LDO(ids, base) { \ 199 .name = #ids, \ 200 .id = STPMIC1_##ids, \ 201 .n_voltages = 32, \ 202 .ops = &stpmic1_ldo_ops, \ 203 .linear_ranges = base ## _ranges, \ 204 .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \ 205 .type = REGULATOR_VOLTAGE, \ 206 .owner = THIS_MODULE, \ 207 .vsel_reg = ids##_ACTIVE_CR, \ 208 .vsel_mask = LDO_VOLTAGE_MASK, \ 209 .enable_reg = ids##_ACTIVE_CR, \ 210 .enable_mask = LDO_ENABLE_MASK, \ 211 .enable_val = 1, \ 212 .disable_val = 0, \ 213 .enable_time = PMIC_ENABLE_TIME_US, \ 214 .ramp_delay = PMIC_RAMP_DELAY, \ 215 .supply_name = #base, \ 216 } 217 218 #define REG_LDO3(ids, base) { \ 219 .name = #ids, \ 220 .id = STPMIC1_##ids, \ 221 .n_voltages = 32, \ 222 .ops = &stpmic1_ldo3_ops, \ 223 .linear_ranges = ldo3_ranges, \ 224 .n_linear_ranges = ARRAY_SIZE(ldo3_ranges), \ 225 .type = REGULATOR_VOLTAGE, \ 226 .owner = THIS_MODULE, \ 227 .vsel_reg = LDO3_ACTIVE_CR, \ 228 .vsel_mask = LDO_VOLTAGE_MASK, \ 229 .enable_reg = LDO3_ACTIVE_CR, \ 230 .enable_mask = LDO_ENABLE_MASK, \ 231 .enable_val = 1, \ 232 .disable_val = 0, \ 233 .enable_time = PMIC_ENABLE_TIME_US, \ 234 .ramp_delay = PMIC_RAMP_DELAY, \ 235 .bypass_reg = LDO3_ACTIVE_CR, \ 236 .bypass_mask = LDO_BYPASS_MASK, \ 237 .bypass_val_on = LDO_BYPASS_MASK, \ 238 .bypass_val_off = 0, \ 239 .supply_name = #base, \ 240 } 241 242 #define REG_LDO4(ids, base) { \ 243 .name = #ids, \ 244 .id = STPMIC1_##ids, \ 245 .n_voltages = 1, \ 246 .ops = &stpmic1_ldo4_fixed_regul_ops, \ 247 .type = REGULATOR_VOLTAGE, \ 248 .owner = THIS_MODULE, \ 249 .min_uV = 3300000, \ 250 .fixed_uV = 3300000, \ 251 .enable_reg = LDO4_ACTIVE_CR, \ 252 .enable_mask = LDO_ENABLE_MASK, \ 253 .enable_val = 1, \ 254 .disable_val = 0, \ 255 .enable_time = PMIC_ENABLE_TIME_US, \ 256 .ramp_delay = PMIC_RAMP_DELAY, \ 257 .supply_name = #base, \ 258 } 259 260 #define REG_BUCK(ids, base) { \ 261 .name = #ids, \ 262 .id = STPMIC1_##ids, \ 263 .ops = &stpmic1_buck_ops, \ 264 .n_voltages = 64, \ 265 .linear_ranges = base ## _ranges, \ 266 .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \ 267 .type = REGULATOR_VOLTAGE, \ 268 .owner = THIS_MODULE, \ 269 .vsel_reg = ids##_ACTIVE_CR, \ 270 .vsel_mask = BUCK_VOLTAGE_MASK, \ 271 .enable_reg = ids##_ACTIVE_CR, \ 272 .enable_mask = BUCK_ENABLE_MASK, \ 273 .enable_val = 1, \ 274 .disable_val = 0, \ 275 .enable_time = PMIC_ENABLE_TIME_US, \ 276 .ramp_delay = PMIC_RAMP_DELAY, \ 277 .of_map_mode = stpmic1_map_mode, \ 278 .pull_down_reg = ids##_PULL_DOWN_REG, \ 279 .pull_down_mask = ids##_PULL_DOWN_MASK, \ 280 .supply_name = #base, \ 281 } 282 283 #define REG_VREF_DDR(ids, base) { \ 284 .name = #ids, \ 285 .id = STPMIC1_##ids, \ 286 .n_voltages = 1, \ 287 .ops = &stpmic1_vref_ddr_ops, \ 288 .type = REGULATOR_VOLTAGE, \ 289 .owner = THIS_MODULE, \ 290 .min_uV = 500000, \ 291 .fixed_uV = 500000, \ 292 .enable_reg = VREF_DDR_ACTIVE_CR, \ 293 .enable_mask = BUCK_ENABLE_MASK, \ 294 .enable_val = 1, \ 295 .disable_val = 0, \ 296 .enable_time = PMIC_ENABLE_TIME_US, \ 297 .supply_name = #base, \ 298 } 299 300 #define REG_BOOST(ids, base) { \ 301 .name = #ids, \ 302 .id = STPMIC1_##ids, \ 303 .n_voltages = 1, \ 304 .ops = &stpmic1_boost_regul_ops, \ 305 .type = REGULATOR_VOLTAGE, \ 306 .owner = THIS_MODULE, \ 307 .min_uV = 0, \ 308 .fixed_uV = 5000000, \ 309 .enable_reg = BST_SW_CR, \ 310 .enable_mask = BOOST_ENABLED, \ 311 .enable_val = BOOST_ENABLED, \ 312 .disable_val = 0, \ 313 .enable_time = PMIC_ENABLE_TIME_US, \ 314 .supply_name = #base, \ 315 } 316 317 #define REG_VBUS_OTG(ids, base) { \ 318 .name = #ids, \ 319 .id = STPMIC1_##ids, \ 320 .n_voltages = 1, \ 321 .ops = &stpmic1_switch_regul_ops, \ 322 .type = REGULATOR_VOLTAGE, \ 323 .owner = THIS_MODULE, \ 324 .min_uV = 0, \ 325 .fixed_uV = 5000000, \ 326 .enable_reg = BST_SW_CR, \ 327 .enable_mask = USBSW_OTG_SWITCH_ENABLED, \ 328 .enable_val = USBSW_OTG_SWITCH_ENABLED, \ 329 .disable_val = 0, \ 330 .enable_time = PMIC_ENABLE_TIME_US, \ 331 .supply_name = #base, \ 332 .active_discharge_reg = BST_SW_CR, \ 333 .active_discharge_mask = VBUS_OTG_DISCHARGE, \ 334 .active_discharge_on = VBUS_OTG_DISCHARGE, \ 335 } 336 337 #define REG_SW_OUT(ids, base) { \ 338 .name = #ids, \ 339 .id = STPMIC1_##ids, \ 340 .n_voltages = 1, \ 341 .ops = &stpmic1_switch_regul_ops, \ 342 .type = REGULATOR_VOLTAGE, \ 343 .owner = THIS_MODULE, \ 344 .min_uV = 0, \ 345 .fixed_uV = 5000000, \ 346 .enable_reg = BST_SW_CR, \ 347 .enable_mask = SWIN_SWOUT_ENABLED, \ 348 .enable_val = SWIN_SWOUT_ENABLED, \ 349 .disable_val = 0, \ 350 .enable_time = PMIC_ENABLE_TIME_US, \ 351 .supply_name = #base, \ 352 .active_discharge_reg = BST_SW_CR, \ 353 .active_discharge_mask = SW_OUT_DISCHARGE, \ 354 .active_discharge_on = SW_OUT_DISCHARGE, \ 355 } 356 357 static const struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = { 358 [STPMIC1_BUCK1] = { 359 .desc = REG_BUCK(BUCK1, buck1), 360 .icc_reg = BUCKS_ICCTO_CR, 361 .icc_mask = BIT(0), 362 .mask_reset_reg = BUCKS_MASK_RESET_CR, 363 .mask_reset_mask = BIT(0), 364 }, 365 [STPMIC1_BUCK2] = { 366 .desc = REG_BUCK(BUCK2, buck2), 367 .icc_reg = BUCKS_ICCTO_CR, 368 .icc_mask = BIT(1), 369 .mask_reset_reg = BUCKS_MASK_RESET_CR, 370 .mask_reset_mask = BIT(1), 371 }, 372 [STPMIC1_BUCK3] = { 373 .desc = REG_BUCK(BUCK3, buck3), 374 .icc_reg = BUCKS_ICCTO_CR, 375 .icc_mask = BIT(2), 376 .mask_reset_reg = BUCKS_MASK_RESET_CR, 377 .mask_reset_mask = BIT(2), 378 }, 379 [STPMIC1_BUCK4] = { 380 .desc = REG_BUCK(BUCK4, buck4), 381 .icc_reg = BUCKS_ICCTO_CR, 382 .icc_mask = BIT(3), 383 .mask_reset_reg = BUCKS_MASK_RESET_CR, 384 .mask_reset_mask = BIT(3), 385 }, 386 [STPMIC1_LDO1] = { 387 .desc = REG_LDO(LDO1, ldo1), 388 .icc_reg = LDOS_ICCTO_CR, 389 .icc_mask = BIT(0), 390 .mask_reset_reg = LDOS_MASK_RESET_CR, 391 .mask_reset_mask = BIT(0), 392 }, 393 [STPMIC1_LDO2] = { 394 .desc = REG_LDO(LDO2, ldo2), 395 .icc_reg = LDOS_ICCTO_CR, 396 .icc_mask = BIT(1), 397 .mask_reset_reg = LDOS_MASK_RESET_CR, 398 .mask_reset_mask = BIT(1), 399 }, 400 [STPMIC1_LDO3] = { 401 .desc = REG_LDO3(LDO3, ldo3), 402 .icc_reg = LDOS_ICCTO_CR, 403 .icc_mask = BIT(2), 404 .mask_reset_reg = LDOS_MASK_RESET_CR, 405 .mask_reset_mask = BIT(2), 406 }, 407 [STPMIC1_LDO4] = { 408 .desc = REG_LDO4(LDO4, ldo4), 409 .icc_reg = LDOS_ICCTO_CR, 410 .icc_mask = BIT(3), 411 .mask_reset_reg = LDOS_MASK_RESET_CR, 412 .mask_reset_mask = BIT(3), 413 }, 414 [STPMIC1_LDO5] = { 415 .desc = REG_LDO(LDO5, ldo5), 416 .icc_reg = LDOS_ICCTO_CR, 417 .icc_mask = BIT(4), 418 .mask_reset_reg = LDOS_MASK_RESET_CR, 419 .mask_reset_mask = BIT(4), 420 }, 421 [STPMIC1_LDO6] = { 422 .desc = REG_LDO(LDO6, ldo6), 423 .icc_reg = LDOS_ICCTO_CR, 424 .icc_mask = BIT(5), 425 .mask_reset_reg = LDOS_MASK_RESET_CR, 426 .mask_reset_mask = BIT(5), 427 }, 428 [STPMIC1_VREF_DDR] = { 429 .desc = REG_VREF_DDR(VREF_DDR, vref_ddr), 430 .mask_reset_reg = LDOS_MASK_RESET_CR, 431 .mask_reset_mask = BIT(6), 432 }, 433 [STPMIC1_BOOST] = { 434 .desc = REG_BOOST(BOOST, boost), 435 .icc_reg = BUCKS_ICCTO_CR, 436 .icc_mask = BIT(6), 437 }, 438 [STPMIC1_VBUS_OTG] = { 439 .desc = REG_VBUS_OTG(VBUS_OTG, pwr_sw1), 440 .icc_reg = BUCKS_ICCTO_CR, 441 .icc_mask = BIT(4), 442 }, 443 [STPMIC1_SW_OUT] = { 444 .desc = REG_SW_OUT(SW_OUT, pwr_sw2), 445 .icc_reg = BUCKS_ICCTO_CR, 446 .icc_mask = BIT(5), 447 }, 448 }; 449 450 static unsigned int stpmic1_map_mode(unsigned int mode) 451 { 452 switch (mode) { 453 case STPMIC1_BUCK_MODE_NORMAL: 454 return REGULATOR_MODE_NORMAL; 455 case STPMIC1_BUCK_MODE_LP: 456 return REGULATOR_MODE_STANDBY; 457 default: 458 return REGULATOR_MODE_INVALID; 459 } 460 } 461 462 static unsigned int stpmic1_get_mode(struct regulator_dev *rdev) 463 { 464 int value; 465 struct regmap *regmap = rdev_get_regmap(rdev); 466 467 regmap_read(regmap, rdev->desc->enable_reg, &value); 468 469 if (value & STPMIC1_BUCK_MODE_LP) 470 return REGULATOR_MODE_STANDBY; 471 472 return REGULATOR_MODE_NORMAL; 473 } 474 475 static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode) 476 { 477 int value; 478 struct regmap *regmap = rdev_get_regmap(rdev); 479 480 switch (mode) { 481 case REGULATOR_MODE_NORMAL: 482 value = STPMIC1_BUCK_MODE_NORMAL; 483 break; 484 case REGULATOR_MODE_STANDBY: 485 value = STPMIC1_BUCK_MODE_LP; 486 break; 487 default: 488 return -EINVAL; 489 } 490 491 return regmap_update_bits(regmap, rdev->desc->enable_reg, 492 STPMIC1_BUCK_MODE_LP, value); 493 } 494 495 static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity, 496 bool enable) 497 { 498 struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev); 499 struct regmap *regmap = rdev_get_regmap(rdev); 500 501 /* 502 * The code seems like one bit in a register controls whether OCP is 503 * enabled. So we might be able to turn it off here is if that 504 * was requested. I won't support this because I don't have the HW. 505 * Feel free to try and implement if you have the HW and need kernel 506 * to disable this. 507 * 508 * Also, I don't know if limit can be configured or if we support 509 * error/warning instead of protect. So I just keep existing logic 510 * and assume no. 511 */ 512 if (lim || severity != REGULATOR_SEVERITY_PROT || !enable) 513 return -EINVAL; 514 515 /* enable switch off in case of over current */ 516 return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask, 517 cfg->icc_mask); 518 } 519 520 static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data) 521 { 522 struct regulator_dev *rdev = (struct regulator_dev *)data; 523 524 /* Send an overcurrent notification */ 525 regulator_notifier_call_chain(rdev, 526 REGULATOR_EVENT_OVER_CURRENT, 527 NULL); 528 529 return IRQ_HANDLED; 530 } 531 532 #define MATCH(_name, _id) \ 533 [STPMIC1_##_id] = { \ 534 .name = #_name, \ 535 .desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \ 536 } 537 538 static struct of_regulator_match stpmic1_matches[] = { 539 MATCH(buck1, BUCK1), 540 MATCH(buck2, BUCK2), 541 MATCH(buck3, BUCK3), 542 MATCH(buck4, BUCK4), 543 MATCH(ldo1, LDO1), 544 MATCH(ldo2, LDO2), 545 MATCH(ldo3, LDO3), 546 MATCH(ldo4, LDO4), 547 MATCH(ldo5, LDO5), 548 MATCH(ldo6, LDO6), 549 MATCH(vref_ddr, VREF_DDR), 550 MATCH(boost, BOOST), 551 MATCH(pwr_sw1, VBUS_OTG), 552 MATCH(pwr_sw2, SW_OUT), 553 }; 554 555 static int stpmic1_regulator_register(struct platform_device *pdev, int id, 556 struct of_regulator_match *match, 557 const struct stpmic1_regulator_cfg *cfg) 558 { 559 struct stpmic1 *pmic_dev = dev_get_drvdata(pdev->dev.parent); 560 struct regulator_dev *rdev; 561 struct regulator_config config = {}; 562 int ret = 0; 563 int irq; 564 565 config.dev = &pdev->dev; 566 config.init_data = match->init_data; 567 config.of_node = match->of_node; 568 config.regmap = pmic_dev->regmap; 569 config.driver_data = (void *)cfg; 570 571 rdev = devm_regulator_register(&pdev->dev, &cfg->desc, &config); 572 if (IS_ERR(rdev)) { 573 dev_err(&pdev->dev, "failed to register %s regulator\n", 574 cfg->desc.name); 575 return PTR_ERR(rdev); 576 } 577 578 /* set mask reset */ 579 if (of_property_read_bool(config.of_node, "st,mask-reset") && 580 cfg->mask_reset_reg != 0) { 581 ret = regmap_update_bits(pmic_dev->regmap, 582 cfg->mask_reset_reg, 583 cfg->mask_reset_mask, 584 cfg->mask_reset_mask); 585 if (ret) { 586 dev_err(&pdev->dev, "set mask reset failed\n"); 587 return ret; 588 } 589 } 590 591 /* setup an irq handler for over-current detection */ 592 irq = of_irq_get(config.of_node, 0); 593 if (irq > 0) { 594 ret = devm_request_threaded_irq(&pdev->dev, 595 irq, NULL, 596 stpmic1_curlim_irq_handler, 597 IRQF_ONESHOT | IRQF_SHARED, 598 pdev->name, rdev); 599 if (ret) { 600 dev_err(&pdev->dev, "Request IRQ failed\n"); 601 return ret; 602 } 603 } 604 return 0; 605 } 606 607 static int stpmic1_regulator_probe(struct platform_device *pdev) 608 { 609 int i, ret; 610 611 ret = of_regulator_match(&pdev->dev, pdev->dev.of_node, stpmic1_matches, 612 ARRAY_SIZE(stpmic1_matches)); 613 if (ret < 0) { 614 dev_err(&pdev->dev, 615 "Error in PMIC regulator device tree node"); 616 return ret; 617 } 618 619 for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) { 620 ret = stpmic1_regulator_register(pdev, i, &stpmic1_matches[i], 621 &stpmic1_regulator_cfgs[i]); 622 if (ret < 0) 623 return ret; 624 } 625 626 dev_dbg(&pdev->dev, "stpmic1_regulator driver probed\n"); 627 628 return 0; 629 } 630 631 static const struct of_device_id of_pmic_regulator_match[] = { 632 { .compatible = "st,stpmic1-regulators" }, 633 { }, 634 }; 635 636 MODULE_DEVICE_TABLE(of, of_pmic_regulator_match); 637 638 static struct platform_driver stpmic1_regulator_driver = { 639 .driver = { 640 .name = "stpmic1-regulator", 641 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 642 .of_match_table = of_match_ptr(of_pmic_regulator_match), 643 }, 644 .probe = stpmic1_regulator_probe, 645 }; 646 647 module_platform_driver(stpmic1_regulator_driver); 648 649 MODULE_DESCRIPTION("STPMIC1 PMIC voltage regulator driver"); 650 MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>"); 651 MODULE_LICENSE("GPL v2"); 652