xref: /linux/drivers/regulator/rt5120-regulator.c (revision 34dc1baba215b826e454b8d19e4f24adbeb7d00d)
1 // SPDX-License-Identifier: GPL-2.0+
2 
3 #include <linux/bits.h>
4 #include <linux/kernel.h>
5 #include <linux/module.h>
6 #include <linux/of.h>
7 #include <linux/platform_device.h>
8 #include <linux/regmap.h>
9 #include <linux/regulator/driver.h>
10 #include <linux/regulator/machine.h>
11 #include <linux/regulator/of_regulator.h>
12 
13 #define RT5120_REG_PGSTAT	0x03
14 #define RT5120_REG_CH1VID	0x06
15 #define RT5120_REG_CH1SLPVID	0x07
16 #define RT5120_REG_ENABLE	0x08
17 #define RT5120_REG_MODECTL	0x09
18 #define RT5120_REG_UVOVPROT	0x0A
19 #define RT5120_REG_SLPCTL	0x0C
20 #define RT5120_REG_INTSTAT	0x1E
21 #define RT5120_REG_DISCHG	0x1F
22 
23 #define RT5120_OUTPG_MASK(rid)	BIT(rid + 1)
24 #define RT5120_OUTUV_MASK(rid)	BIT(rid + 9)
25 #define RT5120_OUTOV_MASK(rid)	BIT(rid + 16)
26 #define RT5120_CH1VID_MASK	GENMASK(6, 0)
27 #define RT5120_RIDEN_MASK(rid)	BIT(rid + 1)
28 #define RT5120_RADEN_MASK(rid)	BIT(rid)
29 #define RT5120_FPWM_MASK(rid)	BIT(rid + 1)
30 #define RT5120_UVHICCUP_MASK	BIT(1)
31 #define RT5120_OVHICCUP_MASK	BIT(0)
32 #define RT5120_HOTDIE_MASK	BIT(1)
33 
34 #define RT5120_BUCK1_MINUV	600000
35 #define RT5120_BUCK1_MAXUV	1393750
36 #define RT5120_BUCK1_STEPUV	6250
37 #define RT5120_BUCK1_NUM_VOLT	0x80
38 
39 #define RT5120_AUTO_MODE	0
40 #define RT5120_FPWM_MODE	1
41 
42 enum {
43 	RT5120_REGULATOR_BUCK1 = 0,
44 	RT5120_REGULATOR_BUCK2,
45 	RT5120_REGULATOR_BUCK3,
46 	RT5120_REGULATOR_BUCK4,
47 	RT5120_REGULATOR_LDO,
48 	RT5120_REGULATOR_EXTEN,
49 	RT5120_MAX_REGULATOR
50 };
51 
52 struct rt5120_priv {
53 	struct device *dev;
54 	struct regmap *regmap;
55 	struct regulator_desc rdesc[RT5120_MAX_REGULATOR];
56 };
57 
58 static int rt5120_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
59 {
60 	struct regmap *regmap = rdev_get_regmap(rdev);
61 	int rid = rdev_get_id(rdev);
62 	unsigned int mask = RT5120_FPWM_MASK(rid), val;
63 
64 	switch (mode) {
65 	case REGULATOR_MODE_NORMAL:
66 		val = 0;
67 		break;
68 	case REGULATOR_MODE_FAST:
69 		val = RT5120_FPWM_MASK(rid);
70 		break;
71 	default:
72 		return -EINVAL;
73 	}
74 
75 	return regmap_update_bits(regmap, RT5120_REG_MODECTL, mask, val);
76 }
77 
78 static unsigned int rt5120_buck_get_mode(struct regulator_dev *rdev)
79 {
80 	struct regmap *regmap = rdev_get_regmap(rdev);
81 	int ret, rid = rdev_get_id(rdev);
82 	unsigned int val;
83 
84 	ret = regmap_read(regmap, RT5120_REG_MODECTL, &val);
85 	if (ret)
86 		return REGULATOR_MODE_INVALID;
87 
88 	if (val & RT5120_FPWM_MASK(rid))
89 		return REGULATOR_MODE_FAST;
90 
91 	return REGULATOR_MODE_NORMAL;
92 }
93 
94 static int rt5120_regulator_get_error_flags(struct regulator_dev *rdev,
95 					    unsigned int *flags)
96 {
97 	struct regmap *regmap = rdev_get_regmap(rdev);
98 	unsigned int stat, hd_stat, cur_flags = 0;
99 	int rid = rdev_get_id(rdev), ret;
100 
101 	/*
102 	 * reg 0x03/0x04/0x05 to indicate PG/UV/OV
103 	 * use block read to descrease I/O xfer time
104 	 */
105 	ret = regmap_raw_read(regmap, RT5120_REG_PGSTAT, &stat, 3);
106 	if (ret)
107 		return ret;
108 
109 	ret = regmap_read(regmap, RT5120_REG_INTSTAT, &hd_stat);
110 	if (ret)
111 		return ret;
112 
113 	if (!(stat & RT5120_OUTPG_MASK(rid))) {
114 		if (stat & RT5120_OUTUV_MASK(rid))
115 			cur_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
116 
117 		if (stat & RT5120_OUTOV_MASK(rid))
118 			cur_flags |= REGULATOR_ERROR_REGULATION_OUT;
119 	}
120 
121 	if (hd_stat & RT5120_HOTDIE_MASK)
122 		cur_flags |= REGULATOR_ERROR_OVER_TEMP;
123 
124 	*flags = cur_flags;
125 	return 0;
126 }
127 
128 static int rt5120_buck1_set_suspend_voltage(struct regulator_dev *rdev, int uV)
129 {
130 	struct regmap *regmap = rdev_get_regmap(rdev);
131 	int sel;
132 
133 	if (uV < RT5120_BUCK1_MINUV || uV > RT5120_BUCK1_MAXUV)
134 		return -EINVAL;
135 
136 	sel = (uV - RT5120_BUCK1_MINUV) / RT5120_BUCK1_STEPUV;
137 	return regmap_write(regmap, RT5120_REG_CH1SLPVID, sel);
138 }
139 
140 static int rt5120_regulator_set_suspend_enable(struct regulator_dev *rdev)
141 {
142 	struct regmap *regmap = rdev_get_regmap(rdev);
143 	int rid = rdev_get_id(rdev);
144 	unsigned int mask = RT5120_RIDEN_MASK(rid);
145 
146 	return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, mask);
147 }
148 
149 static int rt5120_regulator_set_suspend_disable(struct regulator_dev *rdev)
150 {
151 	struct regmap *regmap = rdev_get_regmap(rdev);
152 	int rid = rdev_get_id(rdev);
153 	unsigned int mask = RT5120_RIDEN_MASK(rid);
154 
155 	return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, 0);
156 }
157 
158 static const struct regulator_ops rt5120_buck1_ops = {
159 	.enable = regulator_enable_regmap,
160 	.disable = regulator_disable_regmap,
161 	.is_enabled = regulator_is_enabled_regmap,
162 	.list_voltage = regulator_list_voltage_linear,
163 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
164 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
165 	.set_active_discharge = regulator_set_active_discharge_regmap,
166 	.set_mode = rt5120_buck_set_mode,
167 	.get_mode = rt5120_buck_get_mode,
168 	.get_error_flags = rt5120_regulator_get_error_flags,
169 	.set_suspend_voltage = rt5120_buck1_set_suspend_voltage,
170 	.set_suspend_enable = rt5120_regulator_set_suspend_enable,
171 	.set_suspend_disable = rt5120_regulator_set_suspend_disable,
172 };
173 
174 static const struct regulator_ops rt5120_buck234_ops = {
175 	.enable = regulator_enable_regmap,
176 	.disable = regulator_disable_regmap,
177 	.is_enabled = regulator_is_enabled_regmap,
178 	.set_active_discharge = regulator_set_active_discharge_regmap,
179 	.set_mode = rt5120_buck_set_mode,
180 	.get_mode = rt5120_buck_get_mode,
181 	.get_error_flags = rt5120_regulator_get_error_flags,
182 	.set_suspend_enable = rt5120_regulator_set_suspend_enable,
183 	.set_suspend_disable = rt5120_regulator_set_suspend_disable,
184 };
185 
186 static const struct regulator_ops rt5120_ldo_ops = {
187 	.enable = regulator_enable_regmap,
188 	.disable = regulator_disable_regmap,
189 	.is_enabled = regulator_is_enabled_regmap,
190 	.set_active_discharge = regulator_set_active_discharge_regmap,
191 	.get_error_flags = rt5120_regulator_get_error_flags,
192 	.set_suspend_enable = rt5120_regulator_set_suspend_enable,
193 	.set_suspend_disable = rt5120_regulator_set_suspend_disable,
194 };
195 
196 static const struct regulator_ops rt5120_exten_ops = {
197 	.enable = regulator_enable_regmap,
198 	.disable = regulator_disable_regmap,
199 	.is_enabled = regulator_is_enabled_regmap,
200 	.set_suspend_enable = rt5120_regulator_set_suspend_enable,
201 	.set_suspend_disable = rt5120_regulator_set_suspend_disable,
202 };
203 
204 static unsigned int rt5120_buck_of_map_mode(unsigned int mode)
205 {
206 	switch (mode) {
207 	case RT5120_AUTO_MODE:
208 		return REGULATOR_MODE_NORMAL;
209 	case RT5120_FPWM_MODE:
210 		return REGULATOR_MODE_FAST;
211 	default:
212 		return REGULATOR_MODE_INVALID;
213 	}
214 }
215 
216 static void rt5120_fillin_regulator_desc(struct regulator_desc *desc, int rid)
217 {
218 	static const char * const name[] = {
219 		"buck1", "buck2", "buck3", "buck4", "ldo", "exten" };
220 	static const char * const sname[] = {
221 		"vin1", "vin2", "vin3", "vin4", "vinldo", NULL };
222 
223 	/* Common regulator property */
224 	desc->name = name[rid];
225 	desc->supply_name = sname[rid];
226 	desc->owner = THIS_MODULE;
227 	desc->type = REGULATOR_VOLTAGE;
228 	desc->id = rid;
229 	desc->enable_reg = RT5120_REG_ENABLE;
230 	desc->enable_mask = RT5120_RIDEN_MASK(rid);
231 	desc->active_discharge_reg = RT5120_REG_DISCHG;
232 	desc->active_discharge_mask = RT5120_RADEN_MASK(rid);
233 	desc->active_discharge_on = RT5120_RADEN_MASK(rid);
234 	/* Config n_voltages to 1 for all*/
235 	desc->n_voltages = 1;
236 
237 	/* Only buck support mode change */
238 	if (rid >= RT5120_REGULATOR_BUCK1 && rid <= RT5120_REGULATOR_BUCK4)
239 		desc->of_map_mode = rt5120_buck_of_map_mode;
240 
241 	/* RID specific property init */
242 	switch (rid) {
243 	case RT5120_REGULATOR_BUCK1:
244 		/* Only buck1 support voltage change by I2C */
245 		desc->n_voltages = RT5120_BUCK1_NUM_VOLT;
246 		desc->min_uV = RT5120_BUCK1_MINUV;
247 		desc->uV_step = RT5120_BUCK1_STEPUV;
248 		desc->vsel_reg = RT5120_REG_CH1VID,
249 		desc->vsel_mask = RT5120_CH1VID_MASK,
250 		desc->ops = &rt5120_buck1_ops;
251 		break;
252 	case RT5120_REGULATOR_BUCK2 ... RT5120_REGULATOR_BUCK4:
253 		desc->ops = &rt5120_buck234_ops;
254 		break;
255 	case RT5120_REGULATOR_LDO:
256 		desc->ops = &rt5120_ldo_ops;
257 		break;
258 	default:
259 		desc->ops = &rt5120_exten_ops;
260 	}
261 }
262 
263 static int rt5120_of_parse_cb(struct rt5120_priv *priv, int rid,
264 			      struct of_regulator_match *match)
265 {
266 	struct regulator_desc *desc = priv->rdesc + rid;
267 	struct regulator_init_data *init_data = match->init_data;
268 
269 	if (!init_data || rid == RT5120_REGULATOR_BUCK1)
270 		return 0;
271 
272 	if (init_data->constraints.min_uV != init_data->constraints.max_uV) {
273 		dev_err(priv->dev, "Variable voltage for fixed regulator\n");
274 		return -EINVAL;
275 	}
276 
277 	desc->fixed_uV = init_data->constraints.min_uV;
278 	return 0;
279 }
280 
281 static struct of_regulator_match rt5120_regu_match[RT5120_MAX_REGULATOR] = {
282 	[RT5120_REGULATOR_BUCK1] = { .name = "buck1", },
283 	[RT5120_REGULATOR_BUCK2] = { .name = "buck2", },
284 	[RT5120_REGULATOR_BUCK3] = { .name = "buck3", },
285 	[RT5120_REGULATOR_BUCK4] = { .name = "buck4", },
286 	[RT5120_REGULATOR_LDO] = { .name = "ldo", },
287 	[RT5120_REGULATOR_EXTEN] = { .name = "exten", }
288 };
289 
290 static int rt5120_parse_regulator_dt_data(struct rt5120_priv *priv)
291 {
292 	struct device *dev = priv->dev->parent;
293 	struct device_node *reg_node;
294 	int i, ret;
295 
296 	for (i = 0; i < RT5120_MAX_REGULATOR; i++) {
297 		rt5120_fillin_regulator_desc(priv->rdesc + i, i);
298 
299 		rt5120_regu_match[i].desc = priv->rdesc + i;
300 	}
301 
302 	reg_node = of_get_child_by_name(dev->of_node, "regulators");
303 	if (!reg_node) {
304 		dev_err(priv->dev, "Couldn't find 'regulators' node\n");
305 		return -ENODEV;
306 	}
307 
308 	ret = of_regulator_match(priv->dev, reg_node, rt5120_regu_match,
309 				 ARRAY_SIZE(rt5120_regu_match));
310 
311 	of_node_put(reg_node);
312 
313 	if (ret < 0) {
314 		dev_err(priv->dev,
315 			"Error parsing regulator init data (%d)\n", ret);
316 		return ret;
317 	}
318 
319 	for (i = 0; i < RT5120_MAX_REGULATOR; i++) {
320 		ret = rt5120_of_parse_cb(priv, i, rt5120_regu_match + i);
321 		if (ret) {
322 			dev_err(priv->dev, "Failed in [%d] of_passe_cb\n", i);
323 			return ret;
324 		}
325 	}
326 
327 	return 0;
328 }
329 
330 static int rt5120_device_property_init(struct rt5120_priv *priv)
331 {
332 	struct device *dev = priv->dev->parent;
333 	struct device_node *np = dev->of_node;
334 	bool prot_enable;
335 	unsigned int prot_enable_val = 0;
336 
337 	/* Assign UV/OV HW protection behavior */
338 	prot_enable = of_property_read_bool(np,
339 					    "richtek,enable-undervolt-hiccup");
340 	if (prot_enable)
341 		prot_enable_val |= RT5120_UVHICCUP_MASK;
342 
343 	prot_enable = of_property_read_bool(np,
344 					    "richtek,enable-overvolt-hiccup");
345 	if (prot_enable)
346 		prot_enable_val |= RT5120_OVHICCUP_MASK;
347 
348 	return regmap_update_bits(priv->regmap, RT5120_REG_UVOVPROT,
349 				  RT5120_UVHICCUP_MASK | RT5120_OVHICCUP_MASK,
350 				  prot_enable_val);
351 }
352 
353 static int rt5120_regulator_probe(struct platform_device *pdev)
354 {
355 	struct rt5120_priv *priv;
356 	struct regulator_dev *rdev;
357 	struct regulator_config config = {};
358 	int i, ret;
359 
360 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
361 	if (!priv)
362 		return -ENOMEM;
363 
364 	priv->dev = &pdev->dev;
365 
366 	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
367 	if (!priv->regmap) {
368 		dev_err(&pdev->dev, "Failed to init regmap\n");
369 		return -ENODEV;
370 	}
371 
372 	ret = rt5120_device_property_init(priv);
373 	if (ret) {
374 		dev_err(&pdev->dev, "Failed to do property init\n");
375 		return ret;
376 	}
377 
378 	ret = rt5120_parse_regulator_dt_data(priv);
379 	if (ret) {
380 		dev_err(&pdev->dev, "Failed to parse dt data\n");
381 		return ret;
382 	}
383 
384 	config.dev = &pdev->dev;
385 	config.regmap = priv->regmap;
386 
387 	for (i = 0; i < RT5120_MAX_REGULATOR; i++) {
388 		config.of_node = rt5120_regu_match[i].of_node;
389 		config.init_data = rt5120_regu_match[i].init_data;
390 
391 		rdev = devm_regulator_register(&pdev->dev, priv->rdesc + i,
392 					       &config);
393 		if (IS_ERR(rdev)) {
394 			dev_err(&pdev->dev,
395 				"Failed to register regulator [%d]\n", i);
396 			return PTR_ERR(rdev);
397 		}
398 	}
399 
400 	return 0;
401 }
402 
403 static const struct platform_device_id rt5120_regulator_dev_table[] = {
404 	{ "rt5120-regulator", 0 },
405 	{}
406 };
407 MODULE_DEVICE_TABLE(platform, rt5120_regulator_dev_table);
408 
409 static struct platform_driver rt5120_regulator_driver = {
410 	.driver = {
411 		.name = "rt5120-regulator",
412 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
413 	},
414 	.id_table = rt5120_regulator_dev_table,
415 	.probe = rt5120_regulator_probe,
416 };
417 module_platform_driver(rt5120_regulator_driver);
418 
419 MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
420 MODULE_DESCRIPTION("Richtek RT5120 regulator driver");
421 MODULE_LICENSE("GPL v2");
422