1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2020 Marek Vasut <marex@denx.de> 4 * 5 * Based on rpi_touchscreen.c by Eric Anholt <eric@anholt.net> 6 */ 7 8 #include <linux/backlight.h> 9 #include <linux/err.h> 10 #include <linux/gpio.h> 11 #include <linux/gpio/driver.h> 12 #include <linux/i2c.h> 13 #include <linux/init.h> 14 #include <linux/interrupt.h> 15 #include <linux/module.h> 16 #include <linux/regmap.h> 17 #include <linux/regulator/driver.h> 18 #include <linux/regulator/machine.h> 19 #include <linux/regulator/of_regulator.h> 20 #include <linux/slab.h> 21 22 /* I2C registers of the Atmel microcontroller. */ 23 #define REG_ID 0x80 24 #define REG_PORTA 0x81 25 #define REG_PORTB 0x82 26 #define REG_PORTC 0x83 27 #define REG_POWERON 0x85 28 #define REG_PWM 0x86 29 #define REG_ADDR_L 0x8c 30 #define REG_ADDR_H 0x8d 31 #define REG_WRITE_DATA_H 0x90 32 #define REG_WRITE_DATA_L 0x91 33 34 #define PA_LCD_DITHB BIT(0) 35 #define PA_LCD_MODE BIT(1) 36 #define PA_LCD_LR BIT(2) 37 #define PA_LCD_UD BIT(3) 38 39 #define PB_BRIDGE_PWRDNX_N BIT(0) 40 #define PB_LCD_VCC_N BIT(1) 41 #define PB_LCD_MAIN BIT(7) 42 43 #define PC_LED_EN BIT(0) 44 #define PC_RST_TP_N BIT(1) 45 #define PC_RST_LCD_N BIT(2) 46 #define PC_RST_BRIDGE_N BIT(3) 47 48 enum gpio_signals { 49 RST_BRIDGE_N, /* TC358762 bridge reset */ 50 RST_TP_N, /* Touch controller reset */ 51 NUM_GPIO 52 }; 53 54 struct gpio_signal_mappings { 55 unsigned int reg; 56 unsigned int mask; 57 }; 58 59 static const struct gpio_signal_mappings mappings[NUM_GPIO] = { 60 [RST_BRIDGE_N] = { REG_PORTC, PC_RST_BRIDGE_N | PC_RST_LCD_N }, 61 [RST_TP_N] = { REG_PORTC, PC_RST_TP_N }, 62 }; 63 64 struct attiny_lcd { 65 /* lock to serialise overall accesses to the Atmel */ 66 struct mutex lock; 67 struct regmap *regmap; 68 bool gpio_states[NUM_GPIO]; 69 u8 port_states[3]; 70 71 struct gpio_chip gc; 72 }; 73 74 static const struct regmap_config attiny_regmap_config = { 75 .reg_bits = 8, 76 .val_bits = 8, 77 .disable_locking = 1, 78 .max_register = REG_WRITE_DATA_L, 79 .cache_type = REGCACHE_RBTREE, 80 }; 81 82 static int attiny_set_port_state(struct attiny_lcd *state, int reg, u8 val) 83 { 84 state->port_states[reg - REG_PORTA] = val; 85 return regmap_write(state->regmap, reg, val); 86 }; 87 88 static u8 attiny_get_port_state(struct attiny_lcd *state, int reg) 89 { 90 return state->port_states[reg - REG_PORTA]; 91 }; 92 93 static int attiny_lcd_power_enable(struct regulator_dev *rdev) 94 { 95 struct attiny_lcd *state = rdev_get_drvdata(rdev); 96 97 mutex_lock(&state->lock); 98 99 /* Ensure bridge, and tp stay in reset */ 100 attiny_set_port_state(state, REG_PORTC, 0); 101 usleep_range(5000, 10000); 102 103 /* Default to the same orientation as the closed source 104 * firmware used for the panel. Runtime rotation 105 * configuration will be supported using VC4's plane 106 * orientation bits. 107 */ 108 attiny_set_port_state(state, REG_PORTA, PA_LCD_LR); 109 usleep_range(5000, 10000); 110 /* Main regulator on, and power to the panel (LCD_VCC_N) */ 111 attiny_set_port_state(state, REG_PORTB, PB_LCD_MAIN); 112 usleep_range(5000, 10000); 113 /* Bring controllers out of reset */ 114 attiny_set_port_state(state, REG_PORTC, PC_LED_EN); 115 116 msleep(80); 117 118 mutex_unlock(&state->lock); 119 120 return 0; 121 } 122 123 static int attiny_lcd_power_disable(struct regulator_dev *rdev) 124 { 125 struct attiny_lcd *state = rdev_get_drvdata(rdev); 126 127 mutex_lock(&state->lock); 128 129 regmap_write(rdev->regmap, REG_PWM, 0); 130 usleep_range(5000, 10000); 131 132 attiny_set_port_state(state, REG_PORTA, 0); 133 usleep_range(5000, 10000); 134 attiny_set_port_state(state, REG_PORTB, PB_LCD_VCC_N); 135 usleep_range(5000, 10000); 136 attiny_set_port_state(state, REG_PORTC, 0); 137 msleep(30); 138 139 mutex_unlock(&state->lock); 140 141 return 0; 142 } 143 144 static int attiny_lcd_power_is_enabled(struct regulator_dev *rdev) 145 { 146 struct attiny_lcd *state = rdev_get_drvdata(rdev); 147 unsigned int data; 148 int ret, i; 149 150 mutex_lock(&state->lock); 151 152 for (i = 0; i < 10; i++) { 153 ret = regmap_read(rdev->regmap, REG_PORTC, &data); 154 if (!ret) 155 break; 156 usleep_range(10000, 12000); 157 } 158 159 mutex_unlock(&state->lock); 160 161 if (ret < 0) 162 return ret; 163 164 return data & PC_RST_BRIDGE_N; 165 } 166 167 static const struct regulator_init_data attiny_regulator_default = { 168 .constraints = { 169 .valid_ops_mask = REGULATOR_CHANGE_STATUS, 170 }, 171 }; 172 173 static const struct regulator_ops attiny_regulator_ops = { 174 .enable = attiny_lcd_power_enable, 175 .disable = attiny_lcd_power_disable, 176 .is_enabled = attiny_lcd_power_is_enabled, 177 }; 178 179 static const struct regulator_desc attiny_regulator = { 180 .name = "tc358762-power", 181 .ops = &attiny_regulator_ops, 182 .type = REGULATOR_VOLTAGE, 183 .owner = THIS_MODULE, 184 }; 185 186 static int attiny_update_status(struct backlight_device *bl) 187 { 188 struct attiny_lcd *state = bl_get_data(bl); 189 struct regmap *regmap = state->regmap; 190 int brightness = backlight_get_brightness(bl); 191 int ret, i; 192 193 mutex_lock(&state->lock); 194 195 for (i = 0; i < 10; i++) { 196 ret = regmap_write(regmap, REG_PWM, brightness); 197 if (!ret) 198 break; 199 } 200 201 mutex_unlock(&state->lock); 202 203 return ret; 204 } 205 206 static const struct backlight_ops attiny_bl = { 207 .update_status = attiny_update_status, 208 }; 209 210 static int attiny_gpio_get_direction(struct gpio_chip *gc, unsigned int off) 211 { 212 return GPIO_LINE_DIRECTION_OUT; 213 } 214 215 static void attiny_gpio_set(struct gpio_chip *gc, unsigned int off, int val) 216 { 217 struct attiny_lcd *state = gpiochip_get_data(gc); 218 u8 last_val; 219 220 if (off >= NUM_GPIO) 221 return; 222 223 mutex_lock(&state->lock); 224 225 last_val = attiny_get_port_state(state, mappings[off].reg); 226 if (val) 227 last_val |= mappings[off].mask; 228 else 229 last_val &= ~mappings[off].mask; 230 231 attiny_set_port_state(state, mappings[off].reg, last_val); 232 233 if (off == RST_BRIDGE_N && val) { 234 usleep_range(5000, 8000); 235 regmap_write(state->regmap, REG_ADDR_H, 0x04); 236 usleep_range(5000, 8000); 237 regmap_write(state->regmap, REG_ADDR_L, 0x7c); 238 usleep_range(5000, 8000); 239 regmap_write(state->regmap, REG_WRITE_DATA_H, 0x00); 240 usleep_range(5000, 8000); 241 regmap_write(state->regmap, REG_WRITE_DATA_L, 0x00); 242 243 msleep(100); 244 } 245 246 mutex_unlock(&state->lock); 247 } 248 249 static int attiny_i2c_read(struct i2c_client *client, u8 reg, unsigned int *buf) 250 { 251 struct i2c_msg msgs[1]; 252 u8 addr_buf[1] = { reg }; 253 u8 data_buf[1] = { 0, }; 254 int ret; 255 256 /* Write register address */ 257 msgs[0].addr = client->addr; 258 msgs[0].flags = 0; 259 msgs[0].len = ARRAY_SIZE(addr_buf); 260 msgs[0].buf = addr_buf; 261 262 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 263 if (ret != ARRAY_SIZE(msgs)) 264 return -EIO; 265 266 usleep_range(5000, 10000); 267 268 /* Read data from register */ 269 msgs[0].addr = client->addr; 270 msgs[0].flags = I2C_M_RD; 271 msgs[0].len = 1; 272 msgs[0].buf = data_buf; 273 274 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 275 if (ret != ARRAY_SIZE(msgs)) 276 return -EIO; 277 278 *buf = data_buf[0]; 279 return 0; 280 } 281 282 /* 283 * I2C driver interface functions 284 */ 285 static int attiny_i2c_probe(struct i2c_client *i2c) 286 { 287 struct backlight_properties props = { }; 288 struct regulator_config config = { }; 289 struct backlight_device *bl; 290 struct regulator_dev *rdev; 291 struct attiny_lcd *state; 292 struct regmap *regmap; 293 unsigned int data; 294 int ret; 295 296 state = devm_kzalloc(&i2c->dev, sizeof(*state), GFP_KERNEL); 297 if (!state) 298 return -ENOMEM; 299 300 mutex_init(&state->lock); 301 i2c_set_clientdata(i2c, state); 302 303 regmap = devm_regmap_init_i2c(i2c, &attiny_regmap_config); 304 if (IS_ERR(regmap)) { 305 ret = PTR_ERR(regmap); 306 dev_err(&i2c->dev, "Failed to allocate register map: %d\n", 307 ret); 308 goto error; 309 } 310 311 ret = attiny_i2c_read(i2c, REG_ID, &data); 312 if (ret < 0) { 313 dev_err(&i2c->dev, "Failed to read REG_ID reg: %d\n", ret); 314 goto error; 315 } 316 317 switch (data) { 318 case 0xde: /* ver 1 */ 319 case 0xc3: /* ver 2 */ 320 break; 321 default: 322 dev_err(&i2c->dev, "Unknown Atmel firmware revision: 0x%02x\n", data); 323 ret = -ENODEV; 324 goto error; 325 } 326 327 regmap_write(regmap, REG_POWERON, 0); 328 msleep(30); 329 regmap_write(regmap, REG_PWM, 0); 330 331 config.dev = &i2c->dev; 332 config.regmap = regmap; 333 config.of_node = i2c->dev.of_node; 334 config.init_data = &attiny_regulator_default; 335 config.driver_data = state; 336 337 rdev = devm_regulator_register(&i2c->dev, &attiny_regulator, &config); 338 if (IS_ERR(rdev)) { 339 dev_err(&i2c->dev, "Failed to register ATTINY regulator\n"); 340 ret = PTR_ERR(rdev); 341 goto error; 342 } 343 344 props.type = BACKLIGHT_RAW; 345 props.max_brightness = 0xff; 346 347 state->regmap = regmap; 348 349 bl = devm_backlight_device_register(&i2c->dev, dev_name(&i2c->dev), 350 &i2c->dev, state, &attiny_bl, 351 &props); 352 if (IS_ERR(bl)) { 353 ret = PTR_ERR(bl); 354 goto error; 355 } 356 357 bl->props.brightness = 0xff; 358 359 state->gc.parent = &i2c->dev; 360 state->gc.label = i2c->name; 361 state->gc.owner = THIS_MODULE; 362 state->gc.base = -1; 363 state->gc.ngpio = NUM_GPIO; 364 365 state->gc.set = attiny_gpio_set; 366 state->gc.get_direction = attiny_gpio_get_direction; 367 state->gc.can_sleep = true; 368 369 ret = devm_gpiochip_add_data(&i2c->dev, &state->gc, state); 370 if (ret) { 371 dev_err(&i2c->dev, "Failed to create gpiochip: %d\n", ret); 372 goto error; 373 } 374 375 return 0; 376 377 error: 378 mutex_destroy(&state->lock); 379 380 return ret; 381 } 382 383 static void attiny_i2c_remove(struct i2c_client *client) 384 { 385 struct attiny_lcd *state = i2c_get_clientdata(client); 386 387 mutex_destroy(&state->lock); 388 } 389 390 static const struct of_device_id attiny_dt_ids[] = { 391 { .compatible = "raspberrypi,7inch-touchscreen-panel-regulator" }, 392 {}, 393 }; 394 MODULE_DEVICE_TABLE(of, attiny_dt_ids); 395 396 static struct i2c_driver attiny_regulator_driver = { 397 .driver = { 398 .name = "rpi_touchscreen_attiny", 399 .of_match_table = of_match_ptr(attiny_dt_ids), 400 }, 401 .probe_new = attiny_i2c_probe, 402 .remove = attiny_i2c_remove, 403 }; 404 405 module_i2c_driver(attiny_regulator_driver); 406 407 MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); 408 MODULE_DESCRIPTION("Regulator device driver for Raspberry Pi 7-inch touchscreen"); 409 MODULE_LICENSE("GPL v2"); 410