1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Regulator driver for Rockchip RK805/RK808/RK818 4 * 5 * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd 6 * Copyright (c) 2021 Rockchip Electronics Co., Ltd. 7 * 8 * Author: Chris Zhong <zyw@rock-chips.com> 9 * Author: Zhang Qing <zhangqing@rock-chips.com> 10 * Author: Xu Shengfei <xsf@rock-chips.com> 11 * 12 * Copyright (C) 2016 PHYTEC Messtechnik GmbH 13 * 14 * Author: Wadim Egorov <w.egorov@phytec.de> 15 */ 16 17 #include <linux/delay.h> 18 #include <linux/gpio.h> 19 #include <linux/module.h> 20 #include <linux/of.h> 21 #include <linux/of_gpio.h> 22 #include <linux/mfd/rk808.h> 23 #include <linux/platform_device.h> 24 #include <linux/regulator/driver.h> 25 #include <linux/regulator/of_regulator.h> 26 #include <linux/gpio/consumer.h> 27 28 /* Field Definitions */ 29 #define RK808_BUCK_VSEL_MASK 0x3f 30 #define RK808_BUCK4_VSEL_MASK 0xf 31 #define RK808_LDO_VSEL_MASK 0x1f 32 33 #define RK809_BUCK5_VSEL_MASK 0x7 34 35 #define RK817_LDO_VSEL_MASK 0x7f 36 #define RK817_BOOST_VSEL_MASK 0x7 37 #define RK817_BUCK_VSEL_MASK 0x7f 38 39 #define RK818_BUCK_VSEL_MASK 0x3f 40 #define RK818_BUCK4_VSEL_MASK 0x1f 41 #define RK818_LDO_VSEL_MASK 0x1f 42 #define RK818_LDO3_ON_VSEL_MASK 0xf 43 #define RK818_BOOST_ON_VSEL_MASK 0xe0 44 45 #define RK806_DCDC_SLP_REG_OFFSET 0x0A 46 #define RK806_NLDO_SLP_REG_OFFSET 0x05 47 #define RK806_PLDO_SLP_REG_OFFSET 0x06 48 49 #define RK806_BUCK_SEL_CNT 0xff 50 #define RK806_LDO_SEL_CNT 0xff 51 52 /* Ramp rate definitions for buck1 / buck2 only */ 53 #define RK808_RAMP_RATE_OFFSET 3 54 #define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET) 55 #define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET) 56 #define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET) 57 #define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET) 58 #define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET) 59 60 #define RK808_DVS2_POL BIT(2) 61 #define RK808_DVS1_POL BIT(1) 62 63 /* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */ 64 #define RK808_SLP_REG_OFFSET 1 65 66 /* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */ 67 #define RK808_DVS_REG_OFFSET 2 68 69 /* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */ 70 #define RK808_SLP_SET_OFF_REG_OFFSET 2 71 72 /* max steps for increase voltage of Buck1/2, equal 100mv*/ 73 #define MAX_STEPS_ONE_TIME 8 74 75 #define ENABLE_MASK(id) (BIT(id) | BIT(4 + (id))) 76 #define DISABLE_VAL(id) (BIT(4 + (id))) 77 78 #define RK817_BOOST_DESC(_id, _match, _supply, _min, _max, _step, _vreg,\ 79 _vmask, _ereg, _emask, _enval, _disval, _etime, m_drop) \ 80 { \ 81 .name = (_match), \ 82 .supply_name = (_supply), \ 83 .of_match = of_match_ptr(_match), \ 84 .regulators_node = of_match_ptr("regulators"), \ 85 .type = REGULATOR_VOLTAGE, \ 86 .id = (_id), \ 87 .n_voltages = (((_max) - (_min)) / (_step) + 1), \ 88 .owner = THIS_MODULE, \ 89 .min_uV = (_min) * 1000, \ 90 .uV_step = (_step) * 1000, \ 91 .vsel_reg = (_vreg), \ 92 .vsel_mask = (_vmask), \ 93 .enable_reg = (_ereg), \ 94 .enable_mask = (_emask), \ 95 .enable_val = (_enval), \ 96 .disable_val = (_disval), \ 97 .enable_time = (_etime), \ 98 .min_dropout_uV = (m_drop) * 1000, \ 99 .ops = &rk817_boost_ops, \ 100 } 101 102 #define RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \ 103 _vmask, _ereg, _emask, _enval, _disval, _etime, _ops) \ 104 { \ 105 .name = (_match), \ 106 .supply_name = (_supply), \ 107 .of_match = of_match_ptr(_match), \ 108 .regulators_node = of_match_ptr("regulators"), \ 109 .type = REGULATOR_VOLTAGE, \ 110 .id = (_id), \ 111 .n_voltages = (((_max) - (_min)) / (_step) + 1), \ 112 .owner = THIS_MODULE, \ 113 .min_uV = (_min) * 1000, \ 114 .uV_step = (_step) * 1000, \ 115 .vsel_reg = (_vreg), \ 116 .vsel_mask = (_vmask), \ 117 .enable_reg = (_ereg), \ 118 .enable_mask = (_emask), \ 119 .enable_val = (_enval), \ 120 .disable_val = (_disval), \ 121 .enable_time = (_etime), \ 122 .ops = _ops, \ 123 } 124 125 #define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \ 126 _vmask, _ereg, _emask, _etime) \ 127 RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \ 128 _vmask, _ereg, _emask, 0, 0, _etime, &rk805_reg_ops) 129 130 #define RK806_REGULATOR(_name, _supply_name, _id, _ops,\ 131 _n_voltages, _vr, _er, _lr, ctrl_bit,\ 132 _rr, _rm, _rt)\ 133 [_id] = {\ 134 .name = _name,\ 135 .supply_name = _supply_name,\ 136 .of_match = of_match_ptr(_name),\ 137 .regulators_node = of_match_ptr("regulators"),\ 138 .id = _id,\ 139 .ops = &_ops,\ 140 .type = REGULATOR_VOLTAGE,\ 141 .n_voltages = _n_voltages,\ 142 .linear_ranges = _lr,\ 143 .n_linear_ranges = ARRAY_SIZE(_lr),\ 144 .vsel_reg = _vr,\ 145 .vsel_mask = 0xff,\ 146 .enable_reg = _er,\ 147 .enable_mask = ENABLE_MASK(ctrl_bit),\ 148 .enable_val = ENABLE_MASK(ctrl_bit),\ 149 .disable_val = DISABLE_VAL(ctrl_bit),\ 150 .of_map_mode = rk8xx_regulator_of_map_mode,\ 151 .ramp_reg = _rr,\ 152 .ramp_mask = _rm,\ 153 .ramp_delay_table = _rt, \ 154 .n_ramp_values = ARRAY_SIZE(_rt), \ 155 .owner = THIS_MODULE,\ 156 } 157 158 #define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \ 159 _vmask, _ereg, _emask, _etime) \ 160 RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \ 161 _vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops) 162 163 #define RK817_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \ 164 _vmask, _ereg, _emask, _disval, _etime) \ 165 RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \ 166 _vmask, _ereg, _emask, _emask, _disval, _etime, &rk817_reg_ops) 167 168 #define RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \ 169 _enval, _disval, _ops) \ 170 { \ 171 .name = (_match), \ 172 .supply_name = (_supply), \ 173 .of_match = of_match_ptr(_match), \ 174 .regulators_node = of_match_ptr("regulators"), \ 175 .type = REGULATOR_VOLTAGE, \ 176 .id = (_id), \ 177 .enable_reg = (_ereg), \ 178 .enable_mask = (_emask), \ 179 .enable_val = (_enval), \ 180 .disable_val = (_disval), \ 181 .owner = THIS_MODULE, \ 182 .ops = _ops \ 183 } 184 185 #define RK817_DESC_SWITCH(_id, _match, _supply, _ereg, _emask, \ 186 _disval) \ 187 RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \ 188 _emask, _disval, &rk817_switch_ops) 189 190 #define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \ 191 RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \ 192 0, 0, &rk808_switch_ops) 193 194 struct rk8xx_register_bit { 195 u8 reg; 196 u8 bit; 197 }; 198 199 #define RK8XX_REG_BIT(_reg, _bit) \ 200 { \ 201 .reg = _reg, \ 202 .bit = BIT(_bit), \ 203 } 204 205 struct rk808_regulator_data { 206 struct gpio_desc *dvs_gpio[2]; 207 }; 208 209 static const struct linear_range rk808_ldo3_voltage_ranges[] = { 210 REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000), 211 REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0), 212 }; 213 214 #define RK809_BUCK5_SEL_CNT (8) 215 216 static const struct linear_range rk809_buck5_voltage_ranges[] = { 217 REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0), 218 REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000), 219 REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000), 220 REGULATOR_LINEAR_RANGE(3300000, 6, 7, 300000), 221 }; 222 223 #define RK817_BUCK1_MIN0 500000 224 #define RK817_BUCK1_MAX0 1500000 225 226 #define RK817_BUCK1_MIN1 1600000 227 #define RK817_BUCK1_MAX1 2400000 228 229 #define RK817_BUCK3_MAX1 3400000 230 231 #define RK817_BUCK1_STP0 12500 232 #define RK817_BUCK1_STP1 100000 233 234 #define RK817_BUCK1_SEL0 ((RK817_BUCK1_MAX0 - RK817_BUCK1_MIN0) /\ 235 RK817_BUCK1_STP0) 236 #define RK817_BUCK1_SEL1 ((RK817_BUCK1_MAX1 - RK817_BUCK1_MIN1) /\ 237 RK817_BUCK1_STP1) 238 239 #define RK817_BUCK3_SEL1 ((RK817_BUCK3_MAX1 - RK817_BUCK1_MIN1) /\ 240 RK817_BUCK1_STP1) 241 242 #define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1) 243 #define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1) 244 245 static const struct linear_range rk817_buck1_voltage_ranges[] = { 246 REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0, 247 RK817_BUCK1_SEL0, RK817_BUCK1_STP0), 248 REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1, 249 RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1), 250 }; 251 252 static const struct linear_range rk817_buck3_voltage_ranges[] = { 253 REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0, 254 RK817_BUCK1_SEL0, RK817_BUCK1_STP0), 255 REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1, 256 RK817_BUCK3_SEL_CNT, RK817_BUCK1_STP1), 257 }; 258 259 static const unsigned int rk808_buck1_2_ramp_table[] = { 260 2000, 4000, 6000, 10000 261 }; 262 263 /* RK817 RK809 */ 264 static const unsigned int rk817_buck1_4_ramp_table[] = { 265 3000, 6300, 12500, 25000 266 }; 267 268 static int rk806_set_mode_dcdc(struct regulator_dev *rdev, unsigned int mode) 269 { 270 int rid = rdev_get_id(rdev); 271 int ctr_bit, reg; 272 273 reg = RK806_POWER_FPWM_EN0 + rid / 8; 274 ctr_bit = rid % 8; 275 276 switch (mode) { 277 case REGULATOR_MODE_FAST: 278 return regmap_update_bits(rdev->regmap, reg, 279 PWM_MODE_MSK << ctr_bit, 280 FPWM_MODE << ctr_bit); 281 case REGULATOR_MODE_NORMAL: 282 return regmap_update_bits(rdev->regmap, reg, 283 PWM_MODE_MSK << ctr_bit, 284 AUTO_PWM_MODE << ctr_bit); 285 default: 286 dev_err(rdev_get_dev(rdev), "mode unsupported: %u\n", mode); 287 return -EINVAL; 288 } 289 290 return 0; 291 } 292 293 static unsigned int rk806_get_mode_dcdc(struct regulator_dev *rdev) 294 { 295 int rid = rdev_get_id(rdev); 296 int ctr_bit, reg; 297 unsigned int val; 298 int err; 299 300 reg = RK806_POWER_FPWM_EN0 + rid / 8; 301 ctr_bit = rid % 8; 302 303 err = regmap_read(rdev->regmap, reg, &val); 304 if (err) 305 return err; 306 307 if ((val >> ctr_bit) & FPWM_MODE) 308 return REGULATOR_MODE_FAST; 309 else 310 return REGULATOR_MODE_NORMAL; 311 } 312 313 static const struct rk8xx_register_bit rk806_dcdc_rate2[] = { 314 RK8XX_REG_BIT(0xEB, 0), 315 RK8XX_REG_BIT(0xEB, 1), 316 RK8XX_REG_BIT(0xEB, 2), 317 RK8XX_REG_BIT(0xEB, 3), 318 RK8XX_REG_BIT(0xEB, 4), 319 RK8XX_REG_BIT(0xEB, 5), 320 RK8XX_REG_BIT(0xEB, 6), 321 RK8XX_REG_BIT(0xEB, 7), 322 RK8XX_REG_BIT(0xEA, 0), 323 RK8XX_REG_BIT(0xEA, 1), 324 }; 325 326 static const unsigned int rk806_ramp_delay_table_dcdc[] = { 327 50000, 25000, 12500, 6250, 3125, 1560, 961, 390 328 }; 329 330 static int rk806_set_ramp_delay_dcdc(struct regulator_dev *rdev, int ramp_delay) 331 { 332 int rid = rdev_get_id(rdev); 333 int regval, ramp_value, ret; 334 335 ret = regulator_find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table, 336 rdev->desc->n_ramp_values, &ramp_value); 337 if (ret) { 338 dev_warn(rdev_get_dev(rdev), 339 "Can't set ramp-delay %u, setting %u\n", ramp_delay, 340 rdev->desc->ramp_delay_table[ramp_value]); 341 } 342 343 regval = ramp_value << (ffs(rdev->desc->ramp_mask) - 1); 344 345 ret = regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg, 346 rdev->desc->ramp_mask, regval); 347 if (ret) 348 return ret; 349 350 /* 351 * The above is effectively a copy of regulator_set_ramp_delay_regmap(), 352 * but that only stores the lower 2 bits for rk806 DCDC ramp. The MSB must 353 * be stored in a separate register, so this open codes the implementation 354 * to have access to the ramp_value. 355 */ 356 357 regval = (ramp_value >> 2) & 0x1 ? rk806_dcdc_rate2[rid].bit : 0; 358 return regmap_update_bits(rdev->regmap, rk806_dcdc_rate2[rid].reg, 359 rk806_dcdc_rate2[rid].bit, 360 regval); 361 } 362 363 static const unsigned int rk806_ramp_delay_table_ldo[] = { 364 100000, 50000, 25000, 12500, 6280, 3120, 1900, 780 365 }; 366 367 static int rk806_set_suspend_voltage_range(struct regulator_dev *rdev, int reg_offset, int uv) 368 { 369 int sel = regulator_map_voltage_linear_range(rdev, uv, uv); 370 unsigned int reg; 371 372 if (sel < 0) 373 return -EINVAL; 374 375 reg = rdev->desc->vsel_reg + reg_offset; 376 377 return regmap_update_bits(rdev->regmap, reg, rdev->desc->vsel_mask, sel); 378 } 379 380 static int rk806_set_suspend_voltage_range_dcdc(struct regulator_dev *rdev, int uv) 381 { 382 return rk806_set_suspend_voltage_range(rdev, RK806_DCDC_SLP_REG_OFFSET, uv); 383 } 384 385 static int rk806_set_suspend_voltage_range_nldo(struct regulator_dev *rdev, int uv) 386 { 387 return rk806_set_suspend_voltage_range(rdev, RK806_NLDO_SLP_REG_OFFSET, uv); 388 } 389 390 static int rk806_set_suspend_voltage_range_pldo(struct regulator_dev *rdev, int uv) 391 { 392 return rk806_set_suspend_voltage_range(rdev, RK806_PLDO_SLP_REG_OFFSET, uv); 393 } 394 395 static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev) 396 { 397 struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev); 398 int id = rdev_get_id(rdev); 399 struct gpio_desc *gpio = pdata->dvs_gpio[id]; 400 unsigned int val; 401 int ret; 402 403 if (!gpio || gpiod_get_value(gpio) == 0) 404 return regulator_get_voltage_sel_regmap(rdev); 405 406 ret = regmap_read(rdev->regmap, 407 rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET, 408 &val); 409 if (ret != 0) 410 return ret; 411 412 val &= rdev->desc->vsel_mask; 413 val >>= ffs(rdev->desc->vsel_mask) - 1; 414 415 return val; 416 } 417 418 static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev, 419 unsigned sel) 420 { 421 int ret, delta_sel; 422 unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask; 423 424 ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); 425 if (ret != 0) 426 return ret; 427 428 tmp = val & ~mask; 429 old_sel = val & mask; 430 old_sel >>= ffs(mask) - 1; 431 delta_sel = sel - old_sel; 432 433 /* 434 * If directly modify the register to change the voltage, we will face 435 * the risk of overshoot. Put it into a multi-step, can effectively 436 * avoid this problem, a step is 100mv here. 437 */ 438 while (delta_sel > MAX_STEPS_ONE_TIME) { 439 old_sel += MAX_STEPS_ONE_TIME; 440 val = old_sel << (ffs(mask) - 1); 441 val |= tmp; 442 443 /* 444 * i2c is 400kHz (2.5us per bit) and we must transmit _at least_ 445 * 3 bytes (24 bits) plus start and stop so 26 bits. So we've 446 * got more than 65 us between each voltage change and thus 447 * won't ramp faster than ~1500 uV / us. 448 */ 449 ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val); 450 delta_sel = sel - old_sel; 451 } 452 453 sel <<= ffs(mask) - 1; 454 val = tmp | sel; 455 ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val); 456 457 /* 458 * When we change the voltage register directly, the ramp rate is about 459 * 100000uv/us, wait 1us to make sure the target voltage to be stable, 460 * so we needn't wait extra time after that. 461 */ 462 udelay(1); 463 464 return ret; 465 } 466 467 static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev, 468 unsigned sel) 469 { 470 struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev); 471 int id = rdev_get_id(rdev); 472 struct gpio_desc *gpio = pdata->dvs_gpio[id]; 473 unsigned int reg = rdev->desc->vsel_reg; 474 unsigned old_sel; 475 int ret, gpio_level; 476 477 if (!gpio) 478 return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel); 479 480 gpio_level = gpiod_get_value(gpio); 481 if (gpio_level == 0) { 482 reg += RK808_DVS_REG_OFFSET; 483 ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel); 484 } else { 485 ret = regmap_read(rdev->regmap, 486 reg + RK808_DVS_REG_OFFSET, 487 &old_sel); 488 } 489 490 if (ret != 0) 491 return ret; 492 493 sel <<= ffs(rdev->desc->vsel_mask) - 1; 494 sel |= old_sel & ~rdev->desc->vsel_mask; 495 496 ret = regmap_write(rdev->regmap, reg, sel); 497 if (ret) 498 return ret; 499 500 gpiod_set_value(gpio, !gpio_level); 501 502 return ret; 503 } 504 505 static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev, 506 unsigned int old_selector, 507 unsigned int new_selector) 508 { 509 struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev); 510 int id = rdev_get_id(rdev); 511 struct gpio_desc *gpio = pdata->dvs_gpio[id]; 512 513 /* if there is no dvs1/2 pin, we don't need wait extra time here. */ 514 if (!gpio) 515 return 0; 516 517 return regulator_set_voltage_time_sel(rdev, old_selector, new_selector); 518 } 519 520 static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv) 521 { 522 unsigned int reg; 523 int sel = regulator_map_voltage_linear(rdev, uv, uv); 524 525 if (sel < 0) 526 return -EINVAL; 527 528 reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET; 529 530 return regmap_update_bits(rdev->regmap, reg, 531 rdev->desc->vsel_mask, 532 sel); 533 } 534 535 static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv) 536 { 537 unsigned int reg; 538 int sel = regulator_map_voltage_linear_range(rdev, uv, uv); 539 540 if (sel < 0) 541 return -EINVAL; 542 543 reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET; 544 545 return regmap_update_bits(rdev->regmap, reg, 546 rdev->desc->vsel_mask, 547 sel); 548 } 549 550 static int rk805_set_suspend_enable(struct regulator_dev *rdev) 551 { 552 unsigned int reg; 553 554 reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET; 555 556 return regmap_update_bits(rdev->regmap, reg, 557 rdev->desc->enable_mask, 558 rdev->desc->enable_mask); 559 } 560 561 static int rk805_set_suspend_disable(struct regulator_dev *rdev) 562 { 563 unsigned int reg; 564 565 reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET; 566 567 return regmap_update_bits(rdev->regmap, reg, 568 rdev->desc->enable_mask, 569 0); 570 } 571 572 static const struct rk8xx_register_bit rk806_suspend_bits[] = { 573 RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 0), 574 RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 1), 575 RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 2), 576 RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 3), 577 RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 4), 578 RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 5), 579 RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 6), 580 RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 7), 581 RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 6), 582 RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 7), 583 RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 0), 584 RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 1), 585 RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 2), 586 RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 3), 587 RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 4), 588 RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 1), 589 RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 2), 590 RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 3), 591 RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 4), 592 RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 5), 593 RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 0), 594 }; 595 596 static int rk806_set_suspend_enable(struct regulator_dev *rdev) 597 { 598 int rid = rdev_get_id(rdev); 599 600 return regmap_update_bits(rdev->regmap, rk806_suspend_bits[rid].reg, 601 rk806_suspend_bits[rid].bit, 602 rk806_suspend_bits[rid].bit); 603 } 604 605 static int rk806_set_suspend_disable(struct regulator_dev *rdev) 606 { 607 int rid = rdev_get_id(rdev); 608 609 return regmap_update_bits(rdev->regmap, rk806_suspend_bits[rid].reg, 610 rk806_suspend_bits[rid].bit, 0); 611 } 612 613 static int rk808_set_suspend_enable(struct regulator_dev *rdev) 614 { 615 unsigned int reg; 616 617 reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET; 618 619 return regmap_update_bits(rdev->regmap, reg, 620 rdev->desc->enable_mask, 621 0); 622 } 623 624 static int rk808_set_suspend_disable(struct regulator_dev *rdev) 625 { 626 unsigned int reg; 627 628 reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET; 629 630 return regmap_update_bits(rdev->regmap, reg, 631 rdev->desc->enable_mask, 632 rdev->desc->enable_mask); 633 } 634 635 static int rk817_set_suspend_enable_ctrl(struct regulator_dev *rdev, 636 unsigned int en) 637 { 638 unsigned int reg; 639 int id = rdev_get_id(rdev); 640 unsigned int id_slp, msk, val; 641 642 if (id >= RK817_ID_DCDC1 && id <= RK817_ID_DCDC4) 643 id_slp = id; 644 else if (id >= RK817_ID_LDO1 && id <= RK817_ID_LDO8) 645 id_slp = 8 + (id - RK817_ID_LDO1); 646 else if (id >= RK817_ID_LDO9 && id <= RK809_ID_SW2) 647 id_slp = 4 + (id - RK817_ID_LDO9); 648 else 649 return -EINVAL; 650 651 reg = RK817_POWER_SLP_EN_REG(id_slp / 8); 652 653 msk = BIT(id_slp % 8); 654 if (en) 655 val = msk; 656 else 657 val = 0; 658 659 return regmap_update_bits(rdev->regmap, reg, msk, val); 660 } 661 662 static int rk817_set_suspend_enable(struct regulator_dev *rdev) 663 { 664 return rk817_set_suspend_enable_ctrl(rdev, 1); 665 } 666 667 static int rk817_set_suspend_disable(struct regulator_dev *rdev) 668 { 669 return rk817_set_suspend_enable_ctrl(rdev, 0); 670 } 671 672 static int rk8xx_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode) 673 { 674 unsigned int reg; 675 676 reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET; 677 678 switch (mode) { 679 case REGULATOR_MODE_FAST: 680 return regmap_update_bits(rdev->regmap, reg, 681 PWM_MODE_MSK, FPWM_MODE); 682 case REGULATOR_MODE_NORMAL: 683 return regmap_update_bits(rdev->regmap, reg, 684 PWM_MODE_MSK, AUTO_PWM_MODE); 685 default: 686 dev_err(&rdev->dev, "do not support this mode\n"); 687 return -EINVAL; 688 } 689 690 return 0; 691 } 692 693 static int rk8xx_set_mode(struct regulator_dev *rdev, unsigned int mode) 694 { 695 switch (mode) { 696 case REGULATOR_MODE_FAST: 697 return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, 698 PWM_MODE_MSK, FPWM_MODE); 699 case REGULATOR_MODE_NORMAL: 700 return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, 701 PWM_MODE_MSK, AUTO_PWM_MODE); 702 default: 703 dev_err(&rdev->dev, "do not support this mode\n"); 704 return -EINVAL; 705 } 706 707 return 0; 708 } 709 710 static unsigned int rk8xx_get_mode(struct regulator_dev *rdev) 711 { 712 unsigned int val; 713 int err; 714 715 err = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); 716 if (err) 717 return err; 718 719 if (val & FPWM_MODE) 720 return REGULATOR_MODE_FAST; 721 else 722 return REGULATOR_MODE_NORMAL; 723 } 724 725 static int rk8xx_is_enabled_wmsk_regmap(struct regulator_dev *rdev) 726 { 727 unsigned int val; 728 int ret; 729 730 ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); 731 if (ret != 0) 732 return ret; 733 734 /* add write mask bit */ 735 val |= (rdev->desc->enable_mask & 0xf0); 736 val &= rdev->desc->enable_mask; 737 738 if (rdev->desc->enable_is_inverted) { 739 if (rdev->desc->enable_val) 740 return val != rdev->desc->enable_val; 741 return (val == 0); 742 } 743 if (rdev->desc->enable_val) 744 return val == rdev->desc->enable_val; 745 return val != 0; 746 } 747 748 static unsigned int rk8xx_regulator_of_map_mode(unsigned int mode) 749 { 750 switch (mode) { 751 case 1: 752 return REGULATOR_MODE_FAST; 753 case 2: 754 return REGULATOR_MODE_NORMAL; 755 default: 756 return REGULATOR_MODE_INVALID; 757 } 758 } 759 760 static const struct regulator_ops rk805_reg_ops = { 761 .list_voltage = regulator_list_voltage_linear, 762 .map_voltage = regulator_map_voltage_linear, 763 .get_voltage_sel = regulator_get_voltage_sel_regmap, 764 .set_voltage_sel = regulator_set_voltage_sel_regmap, 765 .enable = regulator_enable_regmap, 766 .disable = regulator_disable_regmap, 767 .is_enabled = regulator_is_enabled_regmap, 768 .set_suspend_voltage = rk808_set_suspend_voltage, 769 .set_suspend_enable = rk805_set_suspend_enable, 770 .set_suspend_disable = rk805_set_suspend_disable, 771 }; 772 773 static const struct regulator_ops rk805_switch_ops = { 774 .enable = regulator_enable_regmap, 775 .disable = regulator_disable_regmap, 776 .is_enabled = regulator_is_enabled_regmap, 777 .set_suspend_enable = rk805_set_suspend_enable, 778 .set_suspend_disable = rk805_set_suspend_disable, 779 }; 780 781 static const struct regulator_ops rk806_ops_dcdc = { 782 .list_voltage = regulator_list_voltage_linear_range, 783 .map_voltage = regulator_map_voltage_linear_range, 784 .get_voltage_sel = regulator_get_voltage_sel_regmap, 785 .set_voltage_sel = regulator_set_voltage_sel_regmap, 786 .set_voltage_time_sel = regulator_set_voltage_time_sel, 787 .set_mode = rk806_set_mode_dcdc, 788 .get_mode = rk806_get_mode_dcdc, 789 790 .enable = regulator_enable_regmap, 791 .disable = regulator_disable_regmap, 792 .is_enabled = rk8xx_is_enabled_wmsk_regmap, 793 794 .set_suspend_mode = rk806_set_mode_dcdc, 795 .set_ramp_delay = rk806_set_ramp_delay_dcdc, 796 797 .set_suspend_voltage = rk806_set_suspend_voltage_range_dcdc, 798 .set_suspend_enable = rk806_set_suspend_enable, 799 .set_suspend_disable = rk806_set_suspend_disable, 800 }; 801 802 static const struct regulator_ops rk806_ops_nldo = { 803 .list_voltage = regulator_list_voltage_linear_range, 804 .map_voltage = regulator_map_voltage_linear_range, 805 .get_voltage_sel = regulator_get_voltage_sel_regmap, 806 .set_voltage_sel = regulator_set_voltage_sel_regmap, 807 .set_voltage_time_sel = regulator_set_voltage_time_sel, 808 809 .enable = regulator_enable_regmap, 810 .disable = regulator_disable_regmap, 811 .is_enabled = regulator_is_enabled_regmap, 812 813 .set_ramp_delay = regulator_set_ramp_delay_regmap, 814 815 .set_suspend_voltage = rk806_set_suspend_voltage_range_nldo, 816 .set_suspend_enable = rk806_set_suspend_enable, 817 .set_suspend_disable = rk806_set_suspend_disable, 818 }; 819 820 static const struct regulator_ops rk806_ops_pldo = { 821 .list_voltage = regulator_list_voltage_linear_range, 822 .map_voltage = regulator_map_voltage_linear_range, 823 824 .get_voltage_sel = regulator_get_voltage_sel_regmap, 825 .set_voltage_sel = regulator_set_voltage_sel_regmap, 826 .set_voltage_time_sel = regulator_set_voltage_time_sel, 827 828 .enable = regulator_enable_regmap, 829 .disable = regulator_disable_regmap, 830 .is_enabled = regulator_is_enabled_regmap, 831 832 .set_ramp_delay = regulator_set_ramp_delay_regmap, 833 834 .set_suspend_voltage = rk806_set_suspend_voltage_range_pldo, 835 .set_suspend_enable = rk806_set_suspend_enable, 836 .set_suspend_disable = rk806_set_suspend_disable, 837 }; 838 839 static const struct regulator_ops rk808_buck1_2_ops = { 840 .list_voltage = regulator_list_voltage_linear, 841 .map_voltage = regulator_map_voltage_linear, 842 .get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap, 843 .set_voltage_sel = rk808_buck1_2_set_voltage_sel, 844 .set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel, 845 .enable = regulator_enable_regmap, 846 .disable = regulator_disable_regmap, 847 .is_enabled = regulator_is_enabled_regmap, 848 .set_ramp_delay = regulator_set_ramp_delay_regmap, 849 .set_suspend_voltage = rk808_set_suspend_voltage, 850 .set_suspend_enable = rk808_set_suspend_enable, 851 .set_suspend_disable = rk808_set_suspend_disable, 852 }; 853 854 static const struct regulator_ops rk808_reg_ops = { 855 .list_voltage = regulator_list_voltage_linear, 856 .map_voltage = regulator_map_voltage_linear, 857 .get_voltage_sel = regulator_get_voltage_sel_regmap, 858 .set_voltage_sel = regulator_set_voltage_sel_regmap, 859 .enable = regulator_enable_regmap, 860 .disable = regulator_disable_regmap, 861 .is_enabled = regulator_is_enabled_regmap, 862 .set_suspend_voltage = rk808_set_suspend_voltage, 863 .set_suspend_enable = rk808_set_suspend_enable, 864 .set_suspend_disable = rk808_set_suspend_disable, 865 }; 866 867 static const struct regulator_ops rk808_reg_ops_ranges = { 868 .list_voltage = regulator_list_voltage_linear_range, 869 .map_voltage = regulator_map_voltage_linear_range, 870 .get_voltage_sel = regulator_get_voltage_sel_regmap, 871 .set_voltage_sel = regulator_set_voltage_sel_regmap, 872 .enable = regulator_enable_regmap, 873 .disable = regulator_disable_regmap, 874 .is_enabled = regulator_is_enabled_regmap, 875 .set_suspend_voltage = rk808_set_suspend_voltage_range, 876 .set_suspend_enable = rk808_set_suspend_enable, 877 .set_suspend_disable = rk808_set_suspend_disable, 878 }; 879 880 static const struct regulator_ops rk808_switch_ops = { 881 .enable = regulator_enable_regmap, 882 .disable = regulator_disable_regmap, 883 .is_enabled = regulator_is_enabled_regmap, 884 .set_suspend_enable = rk808_set_suspend_enable, 885 .set_suspend_disable = rk808_set_suspend_disable, 886 }; 887 888 static const struct linear_range rk805_buck_1_2_voltage_ranges[] = { 889 REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500), 890 REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000), 891 REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0), 892 }; 893 894 static const struct regulator_ops rk809_buck5_ops_range = { 895 .list_voltage = regulator_list_voltage_linear_range, 896 .map_voltage = regulator_map_voltage_linear_range, 897 .get_voltage_sel = regulator_get_voltage_sel_regmap, 898 .set_voltage_sel = regulator_set_voltage_sel_regmap, 899 .set_voltage_time_sel = regulator_set_voltage_time_sel, 900 .enable = regulator_enable_regmap, 901 .disable = regulator_disable_regmap, 902 .is_enabled = rk8xx_is_enabled_wmsk_regmap, 903 .set_suspend_voltage = rk808_set_suspend_voltage_range, 904 .set_suspend_enable = rk817_set_suspend_enable, 905 .set_suspend_disable = rk817_set_suspend_disable, 906 }; 907 908 static const struct regulator_ops rk817_reg_ops = { 909 .list_voltage = regulator_list_voltage_linear, 910 .map_voltage = regulator_map_voltage_linear, 911 .get_voltage_sel = regulator_get_voltage_sel_regmap, 912 .set_voltage_sel = regulator_set_voltage_sel_regmap, 913 .enable = regulator_enable_regmap, 914 .disable = regulator_disable_regmap, 915 .is_enabled = rk8xx_is_enabled_wmsk_regmap, 916 .set_suspend_voltage = rk808_set_suspend_voltage, 917 .set_suspend_enable = rk817_set_suspend_enable, 918 .set_suspend_disable = rk817_set_suspend_disable, 919 }; 920 921 static const struct regulator_ops rk817_boost_ops = { 922 .list_voltage = regulator_list_voltage_linear, 923 .map_voltage = regulator_map_voltage_linear, 924 .get_voltage_sel = regulator_get_voltage_sel_regmap, 925 .set_voltage_sel = regulator_set_voltage_sel_regmap, 926 .enable = regulator_enable_regmap, 927 .disable = regulator_disable_regmap, 928 .is_enabled = rk8xx_is_enabled_wmsk_regmap, 929 .set_suspend_enable = rk817_set_suspend_enable, 930 .set_suspend_disable = rk817_set_suspend_disable, 931 }; 932 933 static const struct regulator_ops rk817_buck_ops_range = { 934 .list_voltage = regulator_list_voltage_linear_range, 935 .map_voltage = regulator_map_voltage_linear_range, 936 .get_voltage_sel = regulator_get_voltage_sel_regmap, 937 .set_voltage_sel = regulator_set_voltage_sel_regmap, 938 .set_voltage_time_sel = regulator_set_voltage_time_sel, 939 .enable = regulator_enable_regmap, 940 .disable = regulator_disable_regmap, 941 .is_enabled = rk8xx_is_enabled_wmsk_regmap, 942 .set_mode = rk8xx_set_mode, 943 .get_mode = rk8xx_get_mode, 944 .set_suspend_mode = rk8xx_set_suspend_mode, 945 .set_ramp_delay = regulator_set_ramp_delay_regmap, 946 .set_suspend_voltage = rk808_set_suspend_voltage_range, 947 .set_suspend_enable = rk817_set_suspend_enable, 948 .set_suspend_disable = rk817_set_suspend_disable, 949 }; 950 951 static const struct regulator_ops rk817_switch_ops = { 952 .enable = regulator_enable_regmap, 953 .disable = regulator_disable_regmap, 954 .is_enabled = rk8xx_is_enabled_wmsk_regmap, 955 .set_suspend_enable = rk817_set_suspend_enable, 956 .set_suspend_disable = rk817_set_suspend_disable, 957 }; 958 959 static const struct regulator_desc rk805_reg[] = { 960 { 961 .name = "DCDC_REG1", 962 .supply_name = "vcc1", 963 .of_match = of_match_ptr("DCDC_REG1"), 964 .regulators_node = of_match_ptr("regulators"), 965 .id = RK805_ID_DCDC1, 966 .ops = &rk808_reg_ops_ranges, 967 .type = REGULATOR_VOLTAGE, 968 .n_voltages = 64, 969 .linear_ranges = rk805_buck_1_2_voltage_ranges, 970 .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges), 971 .vsel_reg = RK805_BUCK1_ON_VSEL_REG, 972 .vsel_mask = RK818_BUCK_VSEL_MASK, 973 .enable_reg = RK805_DCDC_EN_REG, 974 .enable_mask = BIT(0), 975 .owner = THIS_MODULE, 976 }, { 977 .name = "DCDC_REG2", 978 .supply_name = "vcc2", 979 .of_match = of_match_ptr("DCDC_REG2"), 980 .regulators_node = of_match_ptr("regulators"), 981 .id = RK805_ID_DCDC2, 982 .ops = &rk808_reg_ops_ranges, 983 .type = REGULATOR_VOLTAGE, 984 .n_voltages = 64, 985 .linear_ranges = rk805_buck_1_2_voltage_ranges, 986 .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges), 987 .vsel_reg = RK805_BUCK2_ON_VSEL_REG, 988 .vsel_mask = RK818_BUCK_VSEL_MASK, 989 .enable_reg = RK805_DCDC_EN_REG, 990 .enable_mask = BIT(1), 991 .owner = THIS_MODULE, 992 }, { 993 .name = "DCDC_REG3", 994 .supply_name = "vcc3", 995 .of_match = of_match_ptr("DCDC_REG3"), 996 .regulators_node = of_match_ptr("regulators"), 997 .id = RK805_ID_DCDC3, 998 .ops = &rk805_switch_ops, 999 .type = REGULATOR_VOLTAGE, 1000 .n_voltages = 1, 1001 .enable_reg = RK805_DCDC_EN_REG, 1002 .enable_mask = BIT(2), 1003 .owner = THIS_MODULE, 1004 }, 1005 1006 RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100, 1007 RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK, 1008 RK805_DCDC_EN_REG, BIT(3), 0), 1009 1010 RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100, 1011 RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG, 1012 BIT(0), 400), 1013 RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100, 1014 RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG, 1015 BIT(1), 400), 1016 RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100, 1017 RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG, 1018 BIT(2), 400), 1019 }; 1020 1021 static const struct linear_range rk806_buck_voltage_ranges[] = { 1022 REGULATOR_LINEAR_RANGE(500000, 0, 160, 6250), /* 500mV ~ 1500mV */ 1023 REGULATOR_LINEAR_RANGE(1500000, 161, 237, 25000), /* 1500mV ~ 3400mV */ 1024 REGULATOR_LINEAR_RANGE(3400000, 238, 255, 0), 1025 }; 1026 1027 static const struct linear_range rk806_ldo_voltage_ranges[] = { 1028 REGULATOR_LINEAR_RANGE(500000, 0, 232, 12500), /* 500mV ~ 3400mV */ 1029 REGULATOR_LINEAR_RANGE(3400000, 233, 255, 0), /* 500mV ~ 3400mV */ 1030 }; 1031 1032 static const struct regulator_desc rk806_reg[] = { 1033 RK806_REGULATOR("dcdc-reg1", "vcc1", RK806_ID_DCDC1, rk806_ops_dcdc, 1034 RK806_BUCK_SEL_CNT, RK806_BUCK1_ON_VSEL, 1035 RK806_POWER_EN0, rk806_buck_voltage_ranges, 0, 1036 RK806_BUCK1_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1037 RK806_REGULATOR("dcdc-reg2", "vcc2", RK806_ID_DCDC2, rk806_ops_dcdc, 1038 RK806_BUCK_SEL_CNT, RK806_BUCK2_ON_VSEL, 1039 RK806_POWER_EN0, rk806_buck_voltage_ranges, 1, 1040 RK806_BUCK2_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1041 RK806_REGULATOR("dcdc-reg3", "vcc3", RK806_ID_DCDC3, rk806_ops_dcdc, 1042 RK806_BUCK_SEL_CNT, RK806_BUCK3_ON_VSEL, 1043 RK806_POWER_EN0, rk806_buck_voltage_ranges, 2, 1044 RK806_BUCK3_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1045 RK806_REGULATOR("dcdc-reg4", "vcc4", RK806_ID_DCDC4, rk806_ops_dcdc, 1046 RK806_BUCK_SEL_CNT, RK806_BUCK4_ON_VSEL, 1047 RK806_POWER_EN0, rk806_buck_voltage_ranges, 3, 1048 RK806_BUCK4_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1049 1050 RK806_REGULATOR("dcdc-reg5", "vcc5", RK806_ID_DCDC5, rk806_ops_dcdc, 1051 RK806_BUCK_SEL_CNT, RK806_BUCK5_ON_VSEL, 1052 RK806_POWER_EN1, rk806_buck_voltage_ranges, 0, 1053 RK806_BUCK5_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1054 RK806_REGULATOR("dcdc-reg6", "vcc6", RK806_ID_DCDC6, rk806_ops_dcdc, 1055 RK806_BUCK_SEL_CNT, RK806_BUCK6_ON_VSEL, 1056 RK806_POWER_EN1, rk806_buck_voltage_ranges, 1, 1057 RK806_BUCK6_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1058 RK806_REGULATOR("dcdc-reg7", "vcc7", RK806_ID_DCDC7, rk806_ops_dcdc, 1059 RK806_BUCK_SEL_CNT, RK806_BUCK7_ON_VSEL, 1060 RK806_POWER_EN1, rk806_buck_voltage_ranges, 2, 1061 RK806_BUCK7_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1062 RK806_REGULATOR("dcdc-reg8", "vcc8", RK806_ID_DCDC8, rk806_ops_dcdc, 1063 RK806_BUCK_SEL_CNT, RK806_BUCK8_ON_VSEL, 1064 RK806_POWER_EN1, rk806_buck_voltage_ranges, 3, 1065 RK806_BUCK8_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1066 1067 RK806_REGULATOR("dcdc-reg9", "vcc9", RK806_ID_DCDC9, rk806_ops_dcdc, 1068 RK806_BUCK_SEL_CNT, RK806_BUCK9_ON_VSEL, 1069 RK806_POWER_EN2, rk806_buck_voltage_ranges, 0, 1070 RK806_BUCK9_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1071 RK806_REGULATOR("dcdc-reg10", "vcc10", RK806_ID_DCDC10, rk806_ops_dcdc, 1072 RK806_BUCK_SEL_CNT, RK806_BUCK10_ON_VSEL, 1073 RK806_POWER_EN2, rk806_buck_voltage_ranges, 1, 1074 RK806_BUCK10_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc), 1075 1076 RK806_REGULATOR("nldo-reg1", "vcc13", RK806_ID_NLDO1, rk806_ops_nldo, 1077 RK806_LDO_SEL_CNT, RK806_NLDO1_ON_VSEL, 1078 RK806_POWER_EN3, rk806_ldo_voltage_ranges, 0, 1079 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1080 RK806_REGULATOR("nldo-reg2", "vcc13", RK806_ID_NLDO2, rk806_ops_nldo, 1081 RK806_LDO_SEL_CNT, RK806_NLDO2_ON_VSEL, 1082 RK806_POWER_EN3, rk806_ldo_voltage_ranges, 1, 1083 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1084 RK806_REGULATOR("nldo-reg3", "vcc13", RK806_ID_NLDO3, rk806_ops_nldo, 1085 RK806_LDO_SEL_CNT, RK806_NLDO3_ON_VSEL, 1086 RK806_POWER_EN3, rk806_ldo_voltage_ranges, 2, 1087 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1088 RK806_REGULATOR("nldo-reg4", "vcc14", RK806_ID_NLDO4, rk806_ops_nldo, 1089 RK806_LDO_SEL_CNT, RK806_NLDO4_ON_VSEL, 1090 RK806_POWER_EN3, rk806_ldo_voltage_ranges, 3, 1091 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1092 1093 RK806_REGULATOR("nldo-reg5", "vcc14", RK806_ID_NLDO5, rk806_ops_nldo, 1094 RK806_LDO_SEL_CNT, RK806_NLDO5_ON_VSEL, 1095 RK806_POWER_EN5, rk806_ldo_voltage_ranges, 2, 1096 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1097 1098 RK806_REGULATOR("pldo-reg1", "vcc11", RK806_ID_PLDO1, rk806_ops_pldo, 1099 RK806_LDO_SEL_CNT, RK806_PLDO1_ON_VSEL, 1100 RK806_POWER_EN4, rk806_ldo_voltage_ranges, 1, 1101 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1102 RK806_REGULATOR("pldo-reg2", "vcc11", RK806_ID_PLDO2, rk806_ops_pldo, 1103 RK806_LDO_SEL_CNT, RK806_PLDO2_ON_VSEL, 1104 RK806_POWER_EN4, rk806_ldo_voltage_ranges, 2, 1105 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1106 RK806_REGULATOR("pldo-reg3", "vcc11", RK806_ID_PLDO3, rk806_ops_pldo, 1107 RK806_LDO_SEL_CNT, RK806_PLDO3_ON_VSEL, 1108 RK806_POWER_EN4, rk806_ldo_voltage_ranges, 3, 1109 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1110 1111 RK806_REGULATOR("pldo-reg4", "vcc12", RK806_ID_PLDO4, rk806_ops_pldo, 1112 RK806_LDO_SEL_CNT, RK806_PLDO4_ON_VSEL, 1113 RK806_POWER_EN5, rk806_ldo_voltage_ranges, 0, 1114 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1115 RK806_REGULATOR("pldo-reg5", "vcc12", RK806_ID_PLDO5, rk806_ops_pldo, 1116 RK806_LDO_SEL_CNT, RK806_PLDO5_ON_VSEL, 1117 RK806_POWER_EN5, rk806_ldo_voltage_ranges, 1, 1118 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1119 1120 RK806_REGULATOR("pldo-reg6", "vcca", RK806_ID_PLDO6, rk806_ops_pldo, 1121 RK806_LDO_SEL_CNT, RK806_PLDO6_ON_VSEL, 1122 RK806_POWER_EN4, rk806_ldo_voltage_ranges, 0, 1123 0xEA, 0x38, rk806_ramp_delay_table_ldo), 1124 }; 1125 1126 1127 static const struct regulator_desc rk808_reg[] = { 1128 { 1129 .name = "DCDC_REG1", 1130 .supply_name = "vcc1", 1131 .of_match = of_match_ptr("DCDC_REG1"), 1132 .regulators_node = of_match_ptr("regulators"), 1133 .id = RK808_ID_DCDC1, 1134 .ops = &rk808_buck1_2_ops, 1135 .type = REGULATOR_VOLTAGE, 1136 .min_uV = 712500, 1137 .uV_step = 12500, 1138 .n_voltages = 64, 1139 .vsel_reg = RK808_BUCK1_ON_VSEL_REG, 1140 .vsel_mask = RK808_BUCK_VSEL_MASK, 1141 .enable_reg = RK808_DCDC_EN_REG, 1142 .enable_mask = BIT(0), 1143 .ramp_reg = RK808_BUCK1_CONFIG_REG, 1144 .ramp_mask = RK808_RAMP_RATE_MASK, 1145 .ramp_delay_table = rk808_buck1_2_ramp_table, 1146 .n_ramp_values = ARRAY_SIZE(rk808_buck1_2_ramp_table), 1147 .owner = THIS_MODULE, 1148 }, { 1149 .name = "DCDC_REG2", 1150 .supply_name = "vcc2", 1151 .of_match = of_match_ptr("DCDC_REG2"), 1152 .regulators_node = of_match_ptr("regulators"), 1153 .id = RK808_ID_DCDC2, 1154 .ops = &rk808_buck1_2_ops, 1155 .type = REGULATOR_VOLTAGE, 1156 .min_uV = 712500, 1157 .uV_step = 12500, 1158 .n_voltages = 64, 1159 .vsel_reg = RK808_BUCK2_ON_VSEL_REG, 1160 .vsel_mask = RK808_BUCK_VSEL_MASK, 1161 .enable_reg = RK808_DCDC_EN_REG, 1162 .enable_mask = BIT(1), 1163 .ramp_reg = RK808_BUCK2_CONFIG_REG, 1164 .ramp_mask = RK808_RAMP_RATE_MASK, 1165 .ramp_delay_table = rk808_buck1_2_ramp_table, 1166 .n_ramp_values = ARRAY_SIZE(rk808_buck1_2_ramp_table), 1167 .owner = THIS_MODULE, 1168 }, { 1169 .name = "DCDC_REG3", 1170 .supply_name = "vcc3", 1171 .of_match = of_match_ptr("DCDC_REG3"), 1172 .regulators_node = of_match_ptr("regulators"), 1173 .id = RK808_ID_DCDC3, 1174 .ops = &rk808_switch_ops, 1175 .type = REGULATOR_VOLTAGE, 1176 .n_voltages = 1, 1177 .enable_reg = RK808_DCDC_EN_REG, 1178 .enable_mask = BIT(2), 1179 .owner = THIS_MODULE, 1180 }, 1181 RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100, 1182 RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK, 1183 RK808_DCDC_EN_REG, BIT(3), 0), 1184 RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100, 1185 RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG, 1186 BIT(0), 400), 1187 RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100, 1188 RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG, 1189 BIT(1), 400), 1190 { 1191 .name = "LDO_REG3", 1192 .supply_name = "vcc7", 1193 .of_match = of_match_ptr("LDO_REG3"), 1194 .regulators_node = of_match_ptr("regulators"), 1195 .id = RK808_ID_LDO3, 1196 .ops = &rk808_reg_ops_ranges, 1197 .type = REGULATOR_VOLTAGE, 1198 .n_voltages = 16, 1199 .linear_ranges = rk808_ldo3_voltage_ranges, 1200 .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges), 1201 .vsel_reg = RK808_LDO3_ON_VSEL_REG, 1202 .vsel_mask = RK808_BUCK4_VSEL_MASK, 1203 .enable_reg = RK808_LDO_EN_REG, 1204 .enable_mask = BIT(2), 1205 .enable_time = 400, 1206 .owner = THIS_MODULE, 1207 }, 1208 RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100, 1209 RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG, 1210 BIT(3), 400), 1211 RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100, 1212 RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG, 1213 BIT(4), 400), 1214 RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100, 1215 RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG, 1216 BIT(5), 400), 1217 RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100, 1218 RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG, 1219 BIT(6), 400), 1220 RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100, 1221 RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG, 1222 BIT(7), 400), 1223 RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8", 1224 RK808_DCDC_EN_REG, BIT(5)), 1225 RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12", 1226 RK808_DCDC_EN_REG, BIT(6)), 1227 }; 1228 1229 static const struct regulator_desc rk809_reg[] = { 1230 { 1231 .name = "DCDC_REG1", 1232 .supply_name = "vcc1", 1233 .of_match = of_match_ptr("DCDC_REG1"), 1234 .regulators_node = of_match_ptr("regulators"), 1235 .id = RK817_ID_DCDC1, 1236 .ops = &rk817_buck_ops_range, 1237 .type = REGULATOR_VOLTAGE, 1238 .n_voltages = RK817_BUCK1_SEL_CNT + 1, 1239 .linear_ranges = rk817_buck1_voltage_ranges, 1240 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges), 1241 .vsel_reg = RK817_BUCK1_ON_VSEL_REG, 1242 .vsel_mask = RK817_BUCK_VSEL_MASK, 1243 .enable_reg = RK817_POWER_EN_REG(0), 1244 .enable_mask = ENABLE_MASK(RK817_ID_DCDC1), 1245 .enable_val = ENABLE_MASK(RK817_ID_DCDC1), 1246 .disable_val = DISABLE_VAL(RK817_ID_DCDC1), 1247 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC1), 1248 .ramp_mask = RK817_RAMP_RATE_MASK, 1249 .ramp_delay_table = rk817_buck1_4_ramp_table, 1250 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table), 1251 .of_map_mode = rk8xx_regulator_of_map_mode, 1252 .owner = THIS_MODULE, 1253 }, { 1254 .name = "DCDC_REG2", 1255 .supply_name = "vcc2", 1256 .of_match = of_match_ptr("DCDC_REG2"), 1257 .regulators_node = of_match_ptr("regulators"), 1258 .id = RK817_ID_DCDC2, 1259 .ops = &rk817_buck_ops_range, 1260 .type = REGULATOR_VOLTAGE, 1261 .n_voltages = RK817_BUCK1_SEL_CNT + 1, 1262 .linear_ranges = rk817_buck1_voltage_ranges, 1263 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges), 1264 .vsel_reg = RK817_BUCK2_ON_VSEL_REG, 1265 .vsel_mask = RK817_BUCK_VSEL_MASK, 1266 .enable_reg = RK817_POWER_EN_REG(0), 1267 .enable_mask = ENABLE_MASK(RK817_ID_DCDC2), 1268 .enable_val = ENABLE_MASK(RK817_ID_DCDC2), 1269 .disable_val = DISABLE_VAL(RK817_ID_DCDC2), 1270 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC2), 1271 .ramp_mask = RK817_RAMP_RATE_MASK, 1272 .ramp_delay_table = rk817_buck1_4_ramp_table, 1273 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table), 1274 .of_map_mode = rk8xx_regulator_of_map_mode, 1275 .owner = THIS_MODULE, 1276 }, { 1277 .name = "DCDC_REG3", 1278 .supply_name = "vcc3", 1279 .of_match = of_match_ptr("DCDC_REG3"), 1280 .regulators_node = of_match_ptr("regulators"), 1281 .id = RK817_ID_DCDC3, 1282 .ops = &rk817_buck_ops_range, 1283 .type = REGULATOR_VOLTAGE, 1284 .n_voltages = RK817_BUCK1_SEL_CNT + 1, 1285 .linear_ranges = rk817_buck1_voltage_ranges, 1286 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges), 1287 .vsel_reg = RK817_BUCK3_ON_VSEL_REG, 1288 .vsel_mask = RK817_BUCK_VSEL_MASK, 1289 .enable_reg = RK817_POWER_EN_REG(0), 1290 .enable_mask = ENABLE_MASK(RK817_ID_DCDC3), 1291 .enable_val = ENABLE_MASK(RK817_ID_DCDC3), 1292 .disable_val = DISABLE_VAL(RK817_ID_DCDC3), 1293 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC3), 1294 .ramp_mask = RK817_RAMP_RATE_MASK, 1295 .ramp_delay_table = rk817_buck1_4_ramp_table, 1296 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table), 1297 .of_map_mode = rk8xx_regulator_of_map_mode, 1298 .owner = THIS_MODULE, 1299 }, { 1300 .name = "DCDC_REG4", 1301 .supply_name = "vcc4", 1302 .of_match = of_match_ptr("DCDC_REG4"), 1303 .regulators_node = of_match_ptr("regulators"), 1304 .id = RK817_ID_DCDC4, 1305 .ops = &rk817_buck_ops_range, 1306 .type = REGULATOR_VOLTAGE, 1307 .n_voltages = RK817_BUCK3_SEL_CNT + 1, 1308 .linear_ranges = rk817_buck3_voltage_ranges, 1309 .n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges), 1310 .vsel_reg = RK817_BUCK4_ON_VSEL_REG, 1311 .vsel_mask = RK817_BUCK_VSEL_MASK, 1312 .enable_reg = RK817_POWER_EN_REG(0), 1313 .enable_mask = ENABLE_MASK(RK817_ID_DCDC4), 1314 .enable_val = ENABLE_MASK(RK817_ID_DCDC4), 1315 .disable_val = DISABLE_VAL(RK817_ID_DCDC4), 1316 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC4), 1317 .ramp_mask = RK817_RAMP_RATE_MASK, 1318 .ramp_delay_table = rk817_buck1_4_ramp_table, 1319 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table), 1320 .of_map_mode = rk8xx_regulator_of_map_mode, 1321 .owner = THIS_MODULE, 1322 }, 1323 { 1324 .name = "DCDC_REG5", 1325 .supply_name = "vcc9", 1326 .of_match = of_match_ptr("DCDC_REG5"), 1327 .regulators_node = of_match_ptr("regulators"), 1328 .id = RK809_ID_DCDC5, 1329 .ops = &rk809_buck5_ops_range, 1330 .type = REGULATOR_VOLTAGE, 1331 .n_voltages = RK809_BUCK5_SEL_CNT, 1332 .linear_ranges = rk809_buck5_voltage_ranges, 1333 .n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges), 1334 .vsel_reg = RK809_BUCK5_CONFIG(0), 1335 .vsel_mask = RK809_BUCK5_VSEL_MASK, 1336 .enable_reg = RK817_POWER_EN_REG(3), 1337 .enable_mask = ENABLE_MASK(1), 1338 .enable_val = ENABLE_MASK(1), 1339 .disable_val = DISABLE_VAL(1), 1340 .of_map_mode = rk8xx_regulator_of_map_mode, 1341 .owner = THIS_MODULE, 1342 }, 1343 RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25, 1344 RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK, 1345 RK817_POWER_EN_REG(1), ENABLE_MASK(0), 1346 DISABLE_VAL(0), 400), 1347 RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25, 1348 RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK, 1349 RK817_POWER_EN_REG(1), ENABLE_MASK(1), 1350 DISABLE_VAL(1), 400), 1351 RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25, 1352 RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK, 1353 RK817_POWER_EN_REG(1), ENABLE_MASK(2), 1354 DISABLE_VAL(2), 400), 1355 RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25, 1356 RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK, 1357 RK817_POWER_EN_REG(1), ENABLE_MASK(3), 1358 DISABLE_VAL(3), 400), 1359 RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25, 1360 RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK, 1361 RK817_POWER_EN_REG(2), ENABLE_MASK(0), 1362 DISABLE_VAL(0), 400), 1363 RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25, 1364 RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK, 1365 RK817_POWER_EN_REG(2), ENABLE_MASK(1), 1366 DISABLE_VAL(1), 400), 1367 RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25, 1368 RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK, 1369 RK817_POWER_EN_REG(2), ENABLE_MASK(2), 1370 DISABLE_VAL(2), 400), 1371 RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25, 1372 RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK, 1373 RK817_POWER_EN_REG(2), ENABLE_MASK(3), 1374 DISABLE_VAL(3), 400), 1375 RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25, 1376 RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK, 1377 RK817_POWER_EN_REG(3), ENABLE_MASK(0), 1378 DISABLE_VAL(0), 400), 1379 RK817_DESC_SWITCH(RK809_ID_SW1, "SWITCH_REG1", "vcc9", 1380 RK817_POWER_EN_REG(3), ENABLE_MASK(2), 1381 DISABLE_VAL(2)), 1382 RK817_DESC_SWITCH(RK809_ID_SW2, "SWITCH_REG2", "vcc8", 1383 RK817_POWER_EN_REG(3), ENABLE_MASK(3), 1384 DISABLE_VAL(3)), 1385 }; 1386 1387 static const struct regulator_desc rk817_reg[] = { 1388 { 1389 .name = "DCDC_REG1", 1390 .supply_name = "vcc1", 1391 .of_match = of_match_ptr("DCDC_REG1"), 1392 .regulators_node = of_match_ptr("regulators"), 1393 .id = RK817_ID_DCDC1, 1394 .ops = &rk817_buck_ops_range, 1395 .type = REGULATOR_VOLTAGE, 1396 .n_voltages = RK817_BUCK1_SEL_CNT + 1, 1397 .linear_ranges = rk817_buck1_voltage_ranges, 1398 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges), 1399 .vsel_reg = RK817_BUCK1_ON_VSEL_REG, 1400 .vsel_mask = RK817_BUCK_VSEL_MASK, 1401 .enable_reg = RK817_POWER_EN_REG(0), 1402 .enable_mask = ENABLE_MASK(RK817_ID_DCDC1), 1403 .enable_val = ENABLE_MASK(RK817_ID_DCDC1), 1404 .disable_val = DISABLE_VAL(RK817_ID_DCDC1), 1405 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC1), 1406 .ramp_mask = RK817_RAMP_RATE_MASK, 1407 .ramp_delay_table = rk817_buck1_4_ramp_table, 1408 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table), 1409 .of_map_mode = rk8xx_regulator_of_map_mode, 1410 .owner = THIS_MODULE, 1411 }, { 1412 .name = "DCDC_REG2", 1413 .supply_name = "vcc2", 1414 .of_match = of_match_ptr("DCDC_REG2"), 1415 .regulators_node = of_match_ptr("regulators"), 1416 .id = RK817_ID_DCDC2, 1417 .ops = &rk817_buck_ops_range, 1418 .type = REGULATOR_VOLTAGE, 1419 .n_voltages = RK817_BUCK1_SEL_CNT + 1, 1420 .linear_ranges = rk817_buck1_voltage_ranges, 1421 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges), 1422 .vsel_reg = RK817_BUCK2_ON_VSEL_REG, 1423 .vsel_mask = RK817_BUCK_VSEL_MASK, 1424 .enable_reg = RK817_POWER_EN_REG(0), 1425 .enable_mask = ENABLE_MASK(RK817_ID_DCDC2), 1426 .enable_val = ENABLE_MASK(RK817_ID_DCDC2), 1427 .disable_val = DISABLE_VAL(RK817_ID_DCDC2), 1428 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC2), 1429 .ramp_mask = RK817_RAMP_RATE_MASK, 1430 .ramp_delay_table = rk817_buck1_4_ramp_table, 1431 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table), 1432 .of_map_mode = rk8xx_regulator_of_map_mode, 1433 .owner = THIS_MODULE, 1434 }, { 1435 .name = "DCDC_REG3", 1436 .supply_name = "vcc3", 1437 .of_match = of_match_ptr("DCDC_REG3"), 1438 .regulators_node = of_match_ptr("regulators"), 1439 .id = RK817_ID_DCDC3, 1440 .ops = &rk817_buck_ops_range, 1441 .type = REGULATOR_VOLTAGE, 1442 .n_voltages = RK817_BUCK1_SEL_CNT + 1, 1443 .linear_ranges = rk817_buck1_voltage_ranges, 1444 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges), 1445 .vsel_reg = RK817_BUCK3_ON_VSEL_REG, 1446 .vsel_mask = RK817_BUCK_VSEL_MASK, 1447 .enable_reg = RK817_POWER_EN_REG(0), 1448 .enable_mask = ENABLE_MASK(RK817_ID_DCDC3), 1449 .enable_val = ENABLE_MASK(RK817_ID_DCDC3), 1450 .disable_val = DISABLE_VAL(RK817_ID_DCDC3), 1451 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC3), 1452 .ramp_mask = RK817_RAMP_RATE_MASK, 1453 .ramp_delay_table = rk817_buck1_4_ramp_table, 1454 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table), 1455 .of_map_mode = rk8xx_regulator_of_map_mode, 1456 .owner = THIS_MODULE, 1457 }, { 1458 .name = "DCDC_REG4", 1459 .supply_name = "vcc4", 1460 .of_match = of_match_ptr("DCDC_REG4"), 1461 .regulators_node = of_match_ptr("regulators"), 1462 .id = RK817_ID_DCDC4, 1463 .ops = &rk817_buck_ops_range, 1464 .type = REGULATOR_VOLTAGE, 1465 .n_voltages = RK817_BUCK3_SEL_CNT + 1, 1466 .linear_ranges = rk817_buck3_voltage_ranges, 1467 .n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges), 1468 .vsel_reg = RK817_BUCK4_ON_VSEL_REG, 1469 .vsel_mask = RK817_BUCK_VSEL_MASK, 1470 .enable_reg = RK817_POWER_EN_REG(0), 1471 .enable_mask = ENABLE_MASK(RK817_ID_DCDC4), 1472 .enable_val = ENABLE_MASK(RK817_ID_DCDC4), 1473 .disable_val = DISABLE_VAL(RK817_ID_DCDC4), 1474 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC4), 1475 .ramp_mask = RK817_RAMP_RATE_MASK, 1476 .ramp_delay_table = rk817_buck1_4_ramp_table, 1477 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table), 1478 .of_map_mode = rk8xx_regulator_of_map_mode, 1479 .owner = THIS_MODULE, 1480 }, 1481 RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25, 1482 RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK, 1483 RK817_POWER_EN_REG(1), ENABLE_MASK(0), 1484 DISABLE_VAL(0), 400), 1485 RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25, 1486 RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK, 1487 RK817_POWER_EN_REG(1), ENABLE_MASK(1), 1488 DISABLE_VAL(1), 400), 1489 RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25, 1490 RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK, 1491 RK817_POWER_EN_REG(1), ENABLE_MASK(2), 1492 DISABLE_VAL(2), 400), 1493 RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25, 1494 RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK, 1495 RK817_POWER_EN_REG(1), ENABLE_MASK(3), 1496 DISABLE_VAL(3), 400), 1497 RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25, 1498 RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK, 1499 RK817_POWER_EN_REG(2), ENABLE_MASK(0), 1500 DISABLE_VAL(0), 400), 1501 RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25, 1502 RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK, 1503 RK817_POWER_EN_REG(2), ENABLE_MASK(1), 1504 DISABLE_VAL(1), 400), 1505 RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25, 1506 RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK, 1507 RK817_POWER_EN_REG(2), ENABLE_MASK(2), 1508 DISABLE_VAL(2), 400), 1509 RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25, 1510 RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK, 1511 RK817_POWER_EN_REG(2), ENABLE_MASK(3), 1512 DISABLE_VAL(3), 400), 1513 RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25, 1514 RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK, 1515 RK817_POWER_EN_REG(3), ENABLE_MASK(0), 1516 DISABLE_VAL(0), 400), 1517 RK817_BOOST_DESC(RK817_ID_BOOST, "BOOST", "vcc8", 4700, 5400, 100, 1518 RK817_BOOST_OTG_CFG, RK817_BOOST_VSEL_MASK, 1519 RK817_POWER_EN_REG(3), ENABLE_MASK(1), ENABLE_MASK(1), 1520 DISABLE_VAL(1), 400, 3500 - 5400), 1521 RK817_DESC_SWITCH(RK817_ID_BOOST_OTG_SW, "OTG_SWITCH", "vcc9", 1522 RK817_POWER_EN_REG(3), ENABLE_MASK(2), 1523 DISABLE_VAL(2)), 1524 }; 1525 1526 static const struct regulator_desc rk818_reg[] = { 1527 { 1528 .name = "DCDC_REG1", 1529 .supply_name = "vcc1", 1530 .of_match = of_match_ptr("DCDC_REG1"), 1531 .regulators_node = of_match_ptr("regulators"), 1532 .id = RK818_ID_DCDC1, 1533 .ops = &rk808_reg_ops, 1534 .type = REGULATOR_VOLTAGE, 1535 .min_uV = 712500, 1536 .uV_step = 12500, 1537 .n_voltages = 64, 1538 .vsel_reg = RK818_BUCK1_ON_VSEL_REG, 1539 .vsel_mask = RK818_BUCK_VSEL_MASK, 1540 .enable_reg = RK818_DCDC_EN_REG, 1541 .enable_mask = BIT(0), 1542 .owner = THIS_MODULE, 1543 }, { 1544 .name = "DCDC_REG2", 1545 .supply_name = "vcc2", 1546 .of_match = of_match_ptr("DCDC_REG2"), 1547 .regulators_node = of_match_ptr("regulators"), 1548 .id = RK818_ID_DCDC2, 1549 .ops = &rk808_reg_ops, 1550 .type = REGULATOR_VOLTAGE, 1551 .min_uV = 712500, 1552 .uV_step = 12500, 1553 .n_voltages = 64, 1554 .vsel_reg = RK818_BUCK2_ON_VSEL_REG, 1555 .vsel_mask = RK818_BUCK_VSEL_MASK, 1556 .enable_reg = RK818_DCDC_EN_REG, 1557 .enable_mask = BIT(1), 1558 .owner = THIS_MODULE, 1559 }, { 1560 .name = "DCDC_REG3", 1561 .supply_name = "vcc3", 1562 .of_match = of_match_ptr("DCDC_REG3"), 1563 .regulators_node = of_match_ptr("regulators"), 1564 .id = RK818_ID_DCDC3, 1565 .ops = &rk808_switch_ops, 1566 .type = REGULATOR_VOLTAGE, 1567 .n_voltages = 1, 1568 .enable_reg = RK818_DCDC_EN_REG, 1569 .enable_mask = BIT(2), 1570 .owner = THIS_MODULE, 1571 }, 1572 RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100, 1573 RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK, 1574 RK818_DCDC_EN_REG, BIT(3), 0), 1575 RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100, 1576 RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK, 1577 RK818_DCDC_EN_REG, BIT(4), 0), 1578 RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100, 1579 RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, 1580 BIT(0), 400), 1581 RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100, 1582 RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, 1583 BIT(1), 400), 1584 { 1585 .name = "LDO_REG3", 1586 .supply_name = "vcc7", 1587 .of_match = of_match_ptr("LDO_REG3"), 1588 .regulators_node = of_match_ptr("regulators"), 1589 .id = RK818_ID_LDO3, 1590 .ops = &rk808_reg_ops_ranges, 1591 .type = REGULATOR_VOLTAGE, 1592 .n_voltages = 16, 1593 .linear_ranges = rk808_ldo3_voltage_ranges, 1594 .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges), 1595 .vsel_reg = RK818_LDO3_ON_VSEL_REG, 1596 .vsel_mask = RK818_LDO3_ON_VSEL_MASK, 1597 .enable_reg = RK818_LDO_EN_REG, 1598 .enable_mask = BIT(2), 1599 .enable_time = 400, 1600 .owner = THIS_MODULE, 1601 }, 1602 RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100, 1603 RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, 1604 BIT(3), 400), 1605 RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100, 1606 RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, 1607 BIT(4), 400), 1608 RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100, 1609 RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, 1610 BIT(5), 400), 1611 RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100, 1612 RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, 1613 BIT(6), 400), 1614 RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100, 1615 RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, 1616 BIT(7), 400), 1617 RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100, 1618 RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK, 1619 RK818_DCDC_EN_REG, BIT(5), 400), 1620 RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9", 1621 RK818_DCDC_EN_REG, BIT(6)), 1622 RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v", 1623 RK818_H5V_EN_REG, BIT(0)), 1624 RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb", 1625 RK818_DCDC_EN_REG, BIT(7)), 1626 }; 1627 1628 static int rk808_regulator_dt_parse_pdata(struct device *dev, 1629 struct regmap *map, 1630 struct rk808_regulator_data *pdata) 1631 { 1632 struct device_node *np; 1633 int tmp, ret = 0, i; 1634 1635 np = of_get_child_by_name(dev->of_node, "regulators"); 1636 if (!np) 1637 return -ENXIO; 1638 1639 for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) { 1640 pdata->dvs_gpio[i] = 1641 devm_gpiod_get_index_optional(dev, "dvs", i, 1642 GPIOD_OUT_LOW); 1643 if (IS_ERR(pdata->dvs_gpio[i])) { 1644 ret = PTR_ERR(pdata->dvs_gpio[i]); 1645 dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret); 1646 goto dt_parse_end; 1647 } 1648 1649 if (!pdata->dvs_gpio[i]) { 1650 dev_info(dev, "there is no dvs%d gpio\n", i); 1651 continue; 1652 } 1653 1654 tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL; 1655 ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp, 1656 gpiod_is_active_low(pdata->dvs_gpio[i]) ? 1657 0 : tmp); 1658 } 1659 1660 dt_parse_end: 1661 of_node_put(np); 1662 return ret; 1663 } 1664 1665 static int rk808_regulator_probe(struct platform_device *pdev) 1666 { 1667 struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); 1668 struct regulator_config config = {}; 1669 struct regulator_dev *rk808_rdev; 1670 struct rk808_regulator_data *pdata; 1671 const struct regulator_desc *regulators; 1672 struct regmap *regmap; 1673 int ret, i, nregulators; 1674 1675 pdev->dev.of_node = pdev->dev.parent->of_node; 1676 pdev->dev.of_node_reused = true; 1677 1678 regmap = dev_get_regmap(pdev->dev.parent, NULL); 1679 if (!regmap) 1680 return -ENODEV; 1681 1682 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 1683 if (!pdata) 1684 return -ENOMEM; 1685 1686 ret = rk808_regulator_dt_parse_pdata(&pdev->dev, regmap, pdata); 1687 if (ret < 0) 1688 return ret; 1689 1690 platform_set_drvdata(pdev, pdata); 1691 1692 switch (rk808->variant) { 1693 case RK805_ID: 1694 regulators = rk805_reg; 1695 nregulators = RK805_NUM_REGULATORS; 1696 break; 1697 case RK806_ID: 1698 regulators = rk806_reg; 1699 nregulators = ARRAY_SIZE(rk806_reg); 1700 break; 1701 case RK808_ID: 1702 regulators = rk808_reg; 1703 nregulators = RK808_NUM_REGULATORS; 1704 break; 1705 case RK809_ID: 1706 regulators = rk809_reg; 1707 nregulators = RK809_NUM_REGULATORS; 1708 break; 1709 case RK817_ID: 1710 regulators = rk817_reg; 1711 nregulators = RK817_NUM_REGULATORS; 1712 break; 1713 case RK818_ID: 1714 regulators = rk818_reg; 1715 nregulators = RK818_NUM_REGULATORS; 1716 break; 1717 default: 1718 dev_err(&pdev->dev, "unsupported RK8XX ID %lu\n", 1719 rk808->variant); 1720 return -EINVAL; 1721 } 1722 1723 config.dev = &pdev->dev; 1724 config.driver_data = pdata; 1725 config.regmap = regmap; 1726 1727 /* Instantiate the regulators */ 1728 for (i = 0; i < nregulators; i++) { 1729 rk808_rdev = devm_regulator_register(&pdev->dev, 1730 ®ulators[i], &config); 1731 if (IS_ERR(rk808_rdev)) 1732 return dev_err_probe(&pdev->dev, PTR_ERR(rk808_rdev), 1733 "failed to register %d regulator\n", i); 1734 } 1735 1736 return 0; 1737 } 1738 1739 static struct platform_driver rk808_regulator_driver = { 1740 .probe = rk808_regulator_probe, 1741 .driver = { 1742 .name = "rk808-regulator", 1743 .probe_type = PROBE_FORCE_SYNCHRONOUS, 1744 }, 1745 }; 1746 1747 module_platform_driver(rk808_regulator_driver); 1748 1749 MODULE_DESCRIPTION("regulator driver for the RK805/RK808/RK818 series PMICs"); 1750 MODULE_AUTHOR("Tony xie <tony.xie@rock-chips.com>"); 1751 MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); 1752 MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>"); 1753 MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>"); 1754 MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>"); 1755 MODULE_LICENSE("GPL"); 1756 MODULE_ALIAS("platform:rk808-regulator"); 1757