1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2014, Sony Mobile Communications AB. 4 * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. 5 */ 6 7 #include <linux/module.h> 8 #include <linux/platform_device.h> 9 #include <linux/of.h> 10 #include <linux/of_device.h> 11 #include <linux/regulator/driver.h> 12 #include <linux/regulator/machine.h> 13 #include <linux/regulator/of_regulator.h> 14 #include <linux/mfd/qcom_rpm.h> 15 16 #include <dt-bindings/mfd/qcom-rpm.h> 17 18 #define MAX_REQUEST_LEN 2 19 20 struct request_member { 21 int word; 22 unsigned int mask; 23 int shift; 24 }; 25 26 struct rpm_reg_parts { 27 struct request_member mV; /* used if voltage is in mV */ 28 struct request_member uV; /* used if voltage is in uV */ 29 struct request_member ip; /* peak current in mA */ 30 struct request_member pd; /* pull down enable */ 31 struct request_member ia; /* average current in mA */ 32 struct request_member fm; /* force mode */ 33 struct request_member pm; /* power mode */ 34 struct request_member pc; /* pin control */ 35 struct request_member pf; /* pin function */ 36 struct request_member enable_state; /* NCP and switch */ 37 struct request_member comp_mode; /* NCP */ 38 struct request_member freq; /* frequency: NCP and SMPS */ 39 struct request_member freq_clk_src; /* clock source: SMPS */ 40 struct request_member hpm; /* switch: control OCP and SS */ 41 int request_len; 42 }; 43 44 #define FORCE_MODE_IS_2_BITS(reg) \ 45 (((reg)->parts->fm.mask >> (reg)->parts->fm.shift) == 3) 46 47 struct qcom_rpm_reg { 48 struct qcom_rpm *rpm; 49 50 struct mutex lock; 51 struct device *dev; 52 struct regulator_desc desc; 53 const struct rpm_reg_parts *parts; 54 55 int resource; 56 u32 val[MAX_REQUEST_LEN]; 57 58 int uV; 59 int is_enabled; 60 61 bool supports_force_mode_auto; 62 bool supports_force_mode_bypass; 63 }; 64 65 static const struct rpm_reg_parts rpm8660_ldo_parts = { 66 .request_len = 2, 67 .mV = { 0, 0x00000FFF, 0 }, 68 .ip = { 0, 0x00FFF000, 12 }, 69 .fm = { 0, 0x03000000, 24 }, 70 .pc = { 0, 0x3C000000, 26 }, 71 .pf = { 0, 0xC0000000, 30 }, 72 .pd = { 1, 0x00000001, 0 }, 73 .ia = { 1, 0x00001FFE, 1 }, 74 }; 75 76 static const struct rpm_reg_parts rpm8660_smps_parts = { 77 .request_len = 2, 78 .mV = { 0, 0x00000FFF, 0 }, 79 .ip = { 0, 0x00FFF000, 12 }, 80 .fm = { 0, 0x03000000, 24 }, 81 .pc = { 0, 0x3C000000, 26 }, 82 .pf = { 0, 0xC0000000, 30 }, 83 .pd = { 1, 0x00000001, 0 }, 84 .ia = { 1, 0x00001FFE, 1 }, 85 .freq = { 1, 0x001FE000, 13 }, 86 .freq_clk_src = { 1, 0x00600000, 21 }, 87 }; 88 89 static const struct rpm_reg_parts rpm8660_switch_parts = { 90 .request_len = 1, 91 .enable_state = { 0, 0x00000001, 0 }, 92 .pd = { 0, 0x00000002, 1 }, 93 .pc = { 0, 0x0000003C, 2 }, 94 .pf = { 0, 0x000000C0, 6 }, 95 .hpm = { 0, 0x00000300, 8 }, 96 }; 97 98 static const struct rpm_reg_parts rpm8660_ncp_parts = { 99 .request_len = 1, 100 .mV = { 0, 0x00000FFF, 0 }, 101 .enable_state = { 0, 0x00001000, 12 }, 102 .comp_mode = { 0, 0x00002000, 13 }, 103 .freq = { 0, 0x003FC000, 14 }, 104 }; 105 106 static const struct rpm_reg_parts rpm8960_ldo_parts = { 107 .request_len = 2, 108 .uV = { 0, 0x007FFFFF, 0 }, 109 .pd = { 0, 0x00800000, 23 }, 110 .pc = { 0, 0x0F000000, 24 }, 111 .pf = { 0, 0xF0000000, 28 }, 112 .ip = { 1, 0x000003FF, 0 }, 113 .ia = { 1, 0x000FFC00, 10 }, 114 .fm = { 1, 0x00700000, 20 }, 115 }; 116 117 static const struct rpm_reg_parts rpm8960_smps_parts = { 118 .request_len = 2, 119 .uV = { 0, 0x007FFFFF, 0 }, 120 .pd = { 0, 0x00800000, 23 }, 121 .pc = { 0, 0x0F000000, 24 }, 122 .pf = { 0, 0xF0000000, 28 }, 123 .ip = { 1, 0x000003FF, 0 }, 124 .ia = { 1, 0x000FFC00, 10 }, 125 .fm = { 1, 0x00700000, 20 }, 126 .pm = { 1, 0x00800000, 23 }, 127 .freq = { 1, 0x1F000000, 24 }, 128 .freq_clk_src = { 1, 0x60000000, 29 }, 129 }; 130 131 static const struct rpm_reg_parts rpm8960_switch_parts = { 132 .request_len = 1, 133 .enable_state = { 0, 0x00000001, 0 }, 134 .pd = { 0, 0x00000002, 1 }, 135 .pc = { 0, 0x0000003C, 2 }, 136 .pf = { 0, 0x000003C0, 6 }, 137 .hpm = { 0, 0x00000C00, 10 }, 138 }; 139 140 static const struct rpm_reg_parts rpm8960_ncp_parts = { 141 .request_len = 1, 142 .uV = { 0, 0x007FFFFF, 0 }, 143 .enable_state = { 0, 0x00800000, 23 }, 144 .comp_mode = { 0, 0x01000000, 24 }, 145 .freq = { 0, 0x3E000000, 25 }, 146 }; 147 148 /* 149 * Physically available PMIC regulator voltage ranges 150 */ 151 static const struct linear_range pldo_ranges[] = { 152 REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500), 153 REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000), 154 REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000), 155 }; 156 157 static const struct linear_range nldo_ranges[] = { 158 REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), 159 }; 160 161 static const struct linear_range nldo1200_ranges[] = { 162 REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250), 163 REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500), 164 }; 165 166 static const struct linear_range smps_ranges[] = { 167 REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), 168 REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), 169 REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), 170 }; 171 172 static const struct linear_range ftsmps_ranges[] = { 173 REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000), 174 REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500), 175 REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), 176 }; 177 178 static const struct linear_range smb208_ranges[] = { 179 REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), 180 REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), 181 REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), 182 REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000), 183 }; 184 185 static const struct linear_range ncp_ranges[] = { 186 REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), 187 }; 188 189 static int rpm_reg_write(struct qcom_rpm_reg *vreg, 190 const struct request_member *req, 191 const int value) 192 { 193 if (WARN_ON((value << req->shift) & ~req->mask)) 194 return -EINVAL; 195 196 vreg->val[req->word] &= ~req->mask; 197 vreg->val[req->word] |= value << req->shift; 198 199 return qcom_rpm_write(vreg->rpm, 200 QCOM_RPM_ACTIVE_STATE, 201 vreg->resource, 202 vreg->val, 203 vreg->parts->request_len); 204 } 205 206 static int rpm_reg_set_mV_sel(struct regulator_dev *rdev, 207 unsigned selector) 208 { 209 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 210 const struct rpm_reg_parts *parts = vreg->parts; 211 const struct request_member *req = &parts->mV; 212 int ret = 0; 213 int uV; 214 215 if (req->mask == 0) 216 return -EINVAL; 217 218 uV = regulator_list_voltage_linear_range(rdev, selector); 219 if (uV < 0) 220 return uV; 221 222 mutex_lock(&vreg->lock); 223 if (vreg->is_enabled) 224 ret = rpm_reg_write(vreg, req, uV / 1000); 225 226 if (!ret) 227 vreg->uV = uV; 228 mutex_unlock(&vreg->lock); 229 230 return ret; 231 } 232 233 static int rpm_reg_set_uV_sel(struct regulator_dev *rdev, 234 unsigned selector) 235 { 236 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 237 const struct rpm_reg_parts *parts = vreg->parts; 238 const struct request_member *req = &parts->uV; 239 int ret = 0; 240 int uV; 241 242 if (req->mask == 0) 243 return -EINVAL; 244 245 uV = regulator_list_voltage_linear_range(rdev, selector); 246 if (uV < 0) 247 return uV; 248 249 mutex_lock(&vreg->lock); 250 if (vreg->is_enabled) 251 ret = rpm_reg_write(vreg, req, uV); 252 253 if (!ret) 254 vreg->uV = uV; 255 mutex_unlock(&vreg->lock); 256 257 return ret; 258 } 259 260 static int rpm_reg_get_voltage(struct regulator_dev *rdev) 261 { 262 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 263 264 return vreg->uV; 265 } 266 267 static int rpm_reg_mV_enable(struct regulator_dev *rdev) 268 { 269 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 270 const struct rpm_reg_parts *parts = vreg->parts; 271 const struct request_member *req = &parts->mV; 272 int ret; 273 274 if (req->mask == 0) 275 return -EINVAL; 276 277 mutex_lock(&vreg->lock); 278 ret = rpm_reg_write(vreg, req, vreg->uV / 1000); 279 if (!ret) 280 vreg->is_enabled = 1; 281 mutex_unlock(&vreg->lock); 282 283 return ret; 284 } 285 286 static int rpm_reg_uV_enable(struct regulator_dev *rdev) 287 { 288 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 289 const struct rpm_reg_parts *parts = vreg->parts; 290 const struct request_member *req = &parts->uV; 291 int ret; 292 293 if (req->mask == 0) 294 return -EINVAL; 295 296 mutex_lock(&vreg->lock); 297 ret = rpm_reg_write(vreg, req, vreg->uV); 298 if (!ret) 299 vreg->is_enabled = 1; 300 mutex_unlock(&vreg->lock); 301 302 return ret; 303 } 304 305 static int rpm_reg_switch_enable(struct regulator_dev *rdev) 306 { 307 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 308 const struct rpm_reg_parts *parts = vreg->parts; 309 const struct request_member *req = &parts->enable_state; 310 int ret; 311 312 if (req->mask == 0) 313 return -EINVAL; 314 315 mutex_lock(&vreg->lock); 316 ret = rpm_reg_write(vreg, req, 1); 317 if (!ret) 318 vreg->is_enabled = 1; 319 mutex_unlock(&vreg->lock); 320 321 return ret; 322 } 323 324 static int rpm_reg_mV_disable(struct regulator_dev *rdev) 325 { 326 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 327 const struct rpm_reg_parts *parts = vreg->parts; 328 const struct request_member *req = &parts->mV; 329 int ret; 330 331 if (req->mask == 0) 332 return -EINVAL; 333 334 mutex_lock(&vreg->lock); 335 ret = rpm_reg_write(vreg, req, 0); 336 if (!ret) 337 vreg->is_enabled = 0; 338 mutex_unlock(&vreg->lock); 339 340 return ret; 341 } 342 343 static int rpm_reg_uV_disable(struct regulator_dev *rdev) 344 { 345 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 346 const struct rpm_reg_parts *parts = vreg->parts; 347 const struct request_member *req = &parts->uV; 348 int ret; 349 350 if (req->mask == 0) 351 return -EINVAL; 352 353 mutex_lock(&vreg->lock); 354 ret = rpm_reg_write(vreg, req, 0); 355 if (!ret) 356 vreg->is_enabled = 0; 357 mutex_unlock(&vreg->lock); 358 359 return ret; 360 } 361 362 static int rpm_reg_switch_disable(struct regulator_dev *rdev) 363 { 364 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 365 const struct rpm_reg_parts *parts = vreg->parts; 366 const struct request_member *req = &parts->enable_state; 367 int ret; 368 369 if (req->mask == 0) 370 return -EINVAL; 371 372 mutex_lock(&vreg->lock); 373 ret = rpm_reg_write(vreg, req, 0); 374 if (!ret) 375 vreg->is_enabled = 0; 376 mutex_unlock(&vreg->lock); 377 378 return ret; 379 } 380 381 static int rpm_reg_is_enabled(struct regulator_dev *rdev) 382 { 383 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 384 385 return vreg->is_enabled; 386 } 387 388 static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA) 389 { 390 struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); 391 const struct rpm_reg_parts *parts = vreg->parts; 392 const struct request_member *req = &parts->ia; 393 int load_mA = load_uA / 1000; 394 int max_mA = req->mask >> req->shift; 395 int ret; 396 397 if (req->mask == 0) 398 return -EINVAL; 399 400 if (load_mA > max_mA) 401 load_mA = max_mA; 402 403 mutex_lock(&vreg->lock); 404 ret = rpm_reg_write(vreg, req, load_mA); 405 mutex_unlock(&vreg->lock); 406 407 return ret; 408 } 409 410 static const struct regulator_ops uV_ops = { 411 .list_voltage = regulator_list_voltage_linear_range, 412 413 .set_voltage_sel = rpm_reg_set_uV_sel, 414 .get_voltage = rpm_reg_get_voltage, 415 416 .enable = rpm_reg_uV_enable, 417 .disable = rpm_reg_uV_disable, 418 .is_enabled = rpm_reg_is_enabled, 419 420 .set_load = rpm_reg_set_load, 421 }; 422 423 static const struct regulator_ops mV_ops = { 424 .list_voltage = regulator_list_voltage_linear_range, 425 426 .set_voltage_sel = rpm_reg_set_mV_sel, 427 .get_voltage = rpm_reg_get_voltage, 428 429 .enable = rpm_reg_mV_enable, 430 .disable = rpm_reg_mV_disable, 431 .is_enabled = rpm_reg_is_enabled, 432 433 .set_load = rpm_reg_set_load, 434 }; 435 436 static const struct regulator_ops switch_ops = { 437 .enable = rpm_reg_switch_enable, 438 .disable = rpm_reg_switch_disable, 439 .is_enabled = rpm_reg_is_enabled, 440 }; 441 442 /* 443 * PM8018 regulators 444 */ 445 static const struct qcom_rpm_reg pm8018_pldo = { 446 .desc.linear_ranges = pldo_ranges, 447 .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges), 448 .desc.n_voltages = 161, 449 .desc.ops = &uV_ops, 450 .parts = &rpm8960_ldo_parts, 451 .supports_force_mode_auto = false, 452 .supports_force_mode_bypass = false, 453 }; 454 455 static const struct qcom_rpm_reg pm8018_nldo = { 456 .desc.linear_ranges = nldo_ranges, 457 .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges), 458 .desc.n_voltages = 64, 459 .desc.ops = &uV_ops, 460 .parts = &rpm8960_ldo_parts, 461 .supports_force_mode_auto = false, 462 .supports_force_mode_bypass = false, 463 }; 464 465 static const struct qcom_rpm_reg pm8018_smps = { 466 .desc.linear_ranges = smps_ranges, 467 .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges), 468 .desc.n_voltages = 154, 469 .desc.ops = &uV_ops, 470 .parts = &rpm8960_smps_parts, 471 .supports_force_mode_auto = false, 472 .supports_force_mode_bypass = false, 473 }; 474 475 static const struct qcom_rpm_reg pm8018_switch = { 476 .desc.ops = &switch_ops, 477 .parts = &rpm8960_switch_parts, 478 }; 479 480 /* 481 * PM8058 regulators 482 */ 483 static const struct qcom_rpm_reg pm8058_pldo = { 484 .desc.linear_ranges = pldo_ranges, 485 .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges), 486 .desc.n_voltages = 161, 487 .desc.ops = &mV_ops, 488 .parts = &rpm8660_ldo_parts, 489 .supports_force_mode_auto = false, 490 .supports_force_mode_bypass = false, 491 }; 492 493 static const struct qcom_rpm_reg pm8058_nldo = { 494 .desc.linear_ranges = nldo_ranges, 495 .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges), 496 .desc.n_voltages = 64, 497 .desc.ops = &mV_ops, 498 .parts = &rpm8660_ldo_parts, 499 .supports_force_mode_auto = false, 500 .supports_force_mode_bypass = false, 501 }; 502 503 static const struct qcom_rpm_reg pm8058_smps = { 504 .desc.linear_ranges = smps_ranges, 505 .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges), 506 .desc.n_voltages = 154, 507 .desc.ops = &mV_ops, 508 .parts = &rpm8660_smps_parts, 509 .supports_force_mode_auto = false, 510 .supports_force_mode_bypass = false, 511 }; 512 513 static const struct qcom_rpm_reg pm8058_ncp = { 514 .desc.linear_ranges = ncp_ranges, 515 .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges), 516 .desc.n_voltages = 32, 517 .desc.ops = &mV_ops, 518 .parts = &rpm8660_ncp_parts, 519 }; 520 521 static const struct qcom_rpm_reg pm8058_switch = { 522 .desc.ops = &switch_ops, 523 .parts = &rpm8660_switch_parts, 524 }; 525 526 /* 527 * PM8901 regulators 528 */ 529 static const struct qcom_rpm_reg pm8901_pldo = { 530 .desc.linear_ranges = pldo_ranges, 531 .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges), 532 .desc.n_voltages = 161, 533 .desc.ops = &mV_ops, 534 .parts = &rpm8660_ldo_parts, 535 .supports_force_mode_auto = false, 536 .supports_force_mode_bypass = true, 537 }; 538 539 static const struct qcom_rpm_reg pm8901_nldo = { 540 .desc.linear_ranges = nldo_ranges, 541 .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges), 542 .desc.n_voltages = 64, 543 .desc.ops = &mV_ops, 544 .parts = &rpm8660_ldo_parts, 545 .supports_force_mode_auto = false, 546 .supports_force_mode_bypass = true, 547 }; 548 549 static const struct qcom_rpm_reg pm8901_ftsmps = { 550 .desc.linear_ranges = ftsmps_ranges, 551 .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges), 552 .desc.n_voltages = 101, 553 .desc.ops = &mV_ops, 554 .parts = &rpm8660_smps_parts, 555 .supports_force_mode_auto = true, 556 .supports_force_mode_bypass = false, 557 }; 558 559 static const struct qcom_rpm_reg pm8901_switch = { 560 .desc.ops = &switch_ops, 561 .parts = &rpm8660_switch_parts, 562 }; 563 564 /* 565 * PM8921 regulators 566 */ 567 static const struct qcom_rpm_reg pm8921_pldo = { 568 .desc.linear_ranges = pldo_ranges, 569 .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges), 570 .desc.n_voltages = 161, 571 .desc.ops = &uV_ops, 572 .parts = &rpm8960_ldo_parts, 573 .supports_force_mode_auto = false, 574 .supports_force_mode_bypass = true, 575 }; 576 577 static const struct qcom_rpm_reg pm8921_nldo = { 578 .desc.linear_ranges = nldo_ranges, 579 .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges), 580 .desc.n_voltages = 64, 581 .desc.ops = &uV_ops, 582 .parts = &rpm8960_ldo_parts, 583 .supports_force_mode_auto = false, 584 .supports_force_mode_bypass = true, 585 }; 586 587 static const struct qcom_rpm_reg pm8921_nldo1200 = { 588 .desc.linear_ranges = nldo1200_ranges, 589 .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges), 590 .desc.n_voltages = 124, 591 .desc.ops = &uV_ops, 592 .parts = &rpm8960_ldo_parts, 593 .supports_force_mode_auto = false, 594 .supports_force_mode_bypass = true, 595 }; 596 597 static const struct qcom_rpm_reg pm8921_smps = { 598 .desc.linear_ranges = smps_ranges, 599 .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges), 600 .desc.n_voltages = 154, 601 .desc.ops = &uV_ops, 602 .parts = &rpm8960_smps_parts, 603 .supports_force_mode_auto = true, 604 .supports_force_mode_bypass = false, 605 }; 606 607 static const struct qcom_rpm_reg pm8921_ncp = { 608 .desc.linear_ranges = ncp_ranges, 609 .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges), 610 .desc.n_voltages = 32, 611 .desc.ops = &uV_ops, 612 .parts = &rpm8960_ncp_parts, 613 }; 614 615 static const struct qcom_rpm_reg pm8921_switch = { 616 .desc.ops = &switch_ops, 617 .parts = &rpm8960_switch_parts, 618 }; 619 620 static const struct qcom_rpm_reg smb208_smps = { 621 .desc.linear_ranges = smb208_ranges, 622 .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges), 623 .desc.n_voltages = 235, 624 .desc.ops = &uV_ops, 625 .parts = &rpm8960_smps_parts, 626 .supports_force_mode_auto = false, 627 .supports_force_mode_bypass = false, 628 }; 629 630 static int rpm_reg_set(struct qcom_rpm_reg *vreg, 631 const struct request_member *req, 632 const int value) 633 { 634 if (req->mask == 0 || (value << req->shift) & ~req->mask) 635 return -EINVAL; 636 637 vreg->val[req->word] &= ~req->mask; 638 vreg->val[req->word] |= value << req->shift; 639 640 return 0; 641 } 642 643 static int rpm_reg_of_parse_freq(struct device *dev, 644 struct device_node *node, 645 struct qcom_rpm_reg *vreg) 646 { 647 static const int freq_table[] = { 648 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000, 649 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000, 650 1280000, 1200000, 651 652 }; 653 const char *key; 654 u32 freq; 655 int ret; 656 int i; 657 658 key = "qcom,switch-mode-frequency"; 659 ret = of_property_read_u32(node, key, &freq); 660 if (ret) { 661 dev_err(dev, "regulator requires %s property\n", key); 662 return -EINVAL; 663 } 664 665 for (i = 0; i < ARRAY_SIZE(freq_table); i++) { 666 if (freq == freq_table[i]) { 667 rpm_reg_set(vreg, &vreg->parts->freq, i + 1); 668 return 0; 669 } 670 } 671 672 dev_err(dev, "invalid frequency %d\n", freq); 673 return -EINVAL; 674 } 675 676 static int rpm_reg_of_parse(struct device_node *node, 677 const struct regulator_desc *desc, 678 struct regulator_config *config) 679 { 680 struct qcom_rpm_reg *vreg = config->driver_data; 681 struct device *dev = config->dev; 682 const char *key; 683 u32 force_mode; 684 bool pwm; 685 u32 val; 686 int ret; 687 688 key = "bias-pull-down"; 689 if (of_property_read_bool(node, key)) { 690 ret = rpm_reg_set(vreg, &vreg->parts->pd, 1); 691 if (ret) { 692 dev_err(dev, "%s is invalid", key); 693 return ret; 694 } 695 } 696 697 if (vreg->parts->freq.mask) { 698 ret = rpm_reg_of_parse_freq(dev, node, vreg); 699 if (ret < 0) 700 return ret; 701 } 702 703 if (vreg->parts->pm.mask) { 704 key = "qcom,power-mode-hysteretic"; 705 pwm = !of_property_read_bool(node, key); 706 707 ret = rpm_reg_set(vreg, &vreg->parts->pm, pwm); 708 if (ret) { 709 dev_err(dev, "failed to set power mode\n"); 710 return ret; 711 } 712 } 713 714 if (vreg->parts->fm.mask) { 715 force_mode = -1; 716 717 key = "qcom,force-mode"; 718 ret = of_property_read_u32(node, key, &val); 719 if (ret == -EINVAL) { 720 val = QCOM_RPM_FORCE_MODE_NONE; 721 } else if (ret < 0) { 722 dev_err(dev, "failed to read %s\n", key); 723 return ret; 724 } 725 726 /* 727 * If force-mode is encoded as 2 bits then the 728 * possible register values are: 729 * NONE, LPM, HPM 730 * otherwise: 731 * NONE, LPM, AUTO, HPM, BYPASS 732 */ 733 switch (val) { 734 case QCOM_RPM_FORCE_MODE_NONE: 735 force_mode = 0; 736 break; 737 case QCOM_RPM_FORCE_MODE_LPM: 738 force_mode = 1; 739 break; 740 case QCOM_RPM_FORCE_MODE_HPM: 741 if (FORCE_MODE_IS_2_BITS(vreg)) 742 force_mode = 2; 743 else 744 force_mode = 3; 745 break; 746 case QCOM_RPM_FORCE_MODE_AUTO: 747 if (vreg->supports_force_mode_auto) 748 force_mode = 2; 749 break; 750 case QCOM_RPM_FORCE_MODE_BYPASS: 751 if (vreg->supports_force_mode_bypass) 752 force_mode = 4; 753 break; 754 } 755 756 if (force_mode == -1) { 757 dev_err(dev, "invalid force mode\n"); 758 return -EINVAL; 759 } 760 761 ret = rpm_reg_set(vreg, &vreg->parts->fm, force_mode); 762 if (ret) { 763 dev_err(dev, "failed to set force mode\n"); 764 return ret; 765 } 766 } 767 768 return 0; 769 } 770 771 struct rpm_regulator_data { 772 const char *name; 773 int resource; 774 const struct qcom_rpm_reg *template; 775 const char *supply; 776 }; 777 778 static const struct rpm_regulator_data rpm_pm8018_regulators[] = { 779 { "s1", QCOM_RPM_PM8018_SMPS1, &pm8018_smps, "vdd_s1" }, 780 { "s2", QCOM_RPM_PM8018_SMPS2, &pm8018_smps, "vdd_s2" }, 781 { "s3", QCOM_RPM_PM8018_SMPS3, &pm8018_smps, "vdd_s3" }, 782 { "s4", QCOM_RPM_PM8018_SMPS4, &pm8018_smps, "vdd_s4" }, 783 { "s5", QCOM_RPM_PM8018_SMPS5, &pm8018_smps, "vdd_s5" }, 784 785 { "l2", QCOM_RPM_PM8018_LDO2, &pm8018_pldo, "vdd_l2" }, 786 { "l3", QCOM_RPM_PM8018_LDO3, &pm8018_pldo, "vdd_l3" }, 787 { "l4", QCOM_RPM_PM8018_LDO4, &pm8018_pldo, "vdd_l4" }, 788 { "l5", QCOM_RPM_PM8018_LDO5, &pm8018_pldo, "vdd_l5" }, 789 { "l6", QCOM_RPM_PM8018_LDO6, &pm8018_pldo, "vdd_l7" }, 790 { "l7", QCOM_RPM_PM8018_LDO7, &pm8018_pldo, "vdd_l7" }, 791 { "l8", QCOM_RPM_PM8018_LDO8, &pm8018_nldo, "vdd_l8" }, 792 { "l9", QCOM_RPM_PM8018_LDO9, &pm8921_nldo1200, 793 "vdd_l9_l10_l11_l12" }, 794 { "l10", QCOM_RPM_PM8018_LDO10, &pm8018_nldo, "vdd_l9_l10_l11_l12" }, 795 { "l11", QCOM_RPM_PM8018_LDO11, &pm8018_nldo, "vdd_l9_l10_l11_l12" }, 796 { "l12", QCOM_RPM_PM8018_LDO12, &pm8018_nldo, "vdd_l9_l10_l11_l12" }, 797 { "l14", QCOM_RPM_PM8018_LDO14, &pm8018_pldo, "vdd_l14" }, 798 799 { "lvs1", QCOM_RPM_PM8018_LVS1, &pm8018_switch, "lvs1_in" }, 800 801 { } 802 }; 803 804 static const struct rpm_regulator_data rpm_pm8058_regulators[] = { 805 { "s0", QCOM_RPM_PM8058_SMPS0, &pm8058_smps, "vdd_s0" }, 806 { "s1", QCOM_RPM_PM8058_SMPS1, &pm8058_smps, "vdd_s1" }, 807 { "s2", QCOM_RPM_PM8058_SMPS2, &pm8058_smps, "vdd_s2" }, 808 { "s3", QCOM_RPM_PM8058_SMPS3, &pm8058_smps, "vdd_s3" }, 809 { "s4", QCOM_RPM_PM8058_SMPS4, &pm8058_smps, "vdd_s4" }, 810 811 { "l0", QCOM_RPM_PM8058_LDO0, &pm8058_nldo, "vdd_l0_l1_lvs" }, 812 { "l1", QCOM_RPM_PM8058_LDO1, &pm8058_nldo, "vdd_l0_l1_lvs" }, 813 { "l2", QCOM_RPM_PM8058_LDO2, &pm8058_pldo, "vdd_l2_l11_l12" }, 814 { "l3", QCOM_RPM_PM8058_LDO3, &pm8058_pldo, "vdd_l3_l4_l5" }, 815 { "l4", QCOM_RPM_PM8058_LDO4, &pm8058_pldo, "vdd_l3_l4_l5" }, 816 { "l5", QCOM_RPM_PM8058_LDO5, &pm8058_pldo, "vdd_l3_l4_l5" }, 817 { "l6", QCOM_RPM_PM8058_LDO6, &pm8058_pldo, "vdd_l6_l7" }, 818 { "l7", QCOM_RPM_PM8058_LDO7, &pm8058_pldo, "vdd_l6_l7" }, 819 { "l8", QCOM_RPM_PM8058_LDO8, &pm8058_pldo, "vdd_l8" }, 820 { "l9", QCOM_RPM_PM8058_LDO9, &pm8058_pldo, "vdd_l9" }, 821 { "l10", QCOM_RPM_PM8058_LDO10, &pm8058_pldo, "vdd_l10" }, 822 { "l11", QCOM_RPM_PM8058_LDO11, &pm8058_pldo, "vdd_l2_l11_l12" }, 823 { "l12", QCOM_RPM_PM8058_LDO12, &pm8058_pldo, "vdd_l2_l11_l12" }, 824 { "l13", QCOM_RPM_PM8058_LDO13, &pm8058_pldo, "vdd_l13_l16" }, 825 { "l14", QCOM_RPM_PM8058_LDO14, &pm8058_pldo, "vdd_l14_l15" }, 826 { "l15", QCOM_RPM_PM8058_LDO15, &pm8058_pldo, "vdd_l14_l15" }, 827 { "l16", QCOM_RPM_PM8058_LDO16, &pm8058_pldo, "vdd_l13_l16" }, 828 { "l17", QCOM_RPM_PM8058_LDO17, &pm8058_pldo, "vdd_l17_l18" }, 829 { "l18", QCOM_RPM_PM8058_LDO18, &pm8058_pldo, "vdd_l17_l18" }, 830 { "l19", QCOM_RPM_PM8058_LDO19, &pm8058_pldo, "vdd_l19_l20" }, 831 { "l20", QCOM_RPM_PM8058_LDO20, &pm8058_pldo, "vdd_l19_l20" }, 832 { "l21", QCOM_RPM_PM8058_LDO21, &pm8058_nldo, "vdd_l21" }, 833 { "l22", QCOM_RPM_PM8058_LDO22, &pm8058_nldo, "vdd_l22" }, 834 { "l23", QCOM_RPM_PM8058_LDO23, &pm8058_nldo, "vdd_l23_l24_l25" }, 835 { "l24", QCOM_RPM_PM8058_LDO24, &pm8058_nldo, "vdd_l23_l24_l25" }, 836 { "l25", QCOM_RPM_PM8058_LDO25, &pm8058_nldo, "vdd_l23_l24_l25" }, 837 838 { "lvs0", QCOM_RPM_PM8058_LVS0, &pm8058_switch, "vdd_l0_l1_lvs" }, 839 { "lvs1", QCOM_RPM_PM8058_LVS1, &pm8058_switch, "vdd_l0_l1_lvs" }, 840 841 { "ncp", QCOM_RPM_PM8058_NCP, &pm8058_ncp, "vdd_ncp" }, 842 { } 843 }; 844 845 static const struct rpm_regulator_data rpm_pm8901_regulators[] = { 846 { "s0", QCOM_RPM_PM8901_SMPS0, &pm8901_ftsmps, "vdd_s0" }, 847 { "s1", QCOM_RPM_PM8901_SMPS1, &pm8901_ftsmps, "vdd_s1" }, 848 { "s2", QCOM_RPM_PM8901_SMPS2, &pm8901_ftsmps, "vdd_s2" }, 849 { "s3", QCOM_RPM_PM8901_SMPS3, &pm8901_ftsmps, "vdd_s3" }, 850 { "s4", QCOM_RPM_PM8901_SMPS4, &pm8901_ftsmps, "vdd_s4" }, 851 852 { "l0", QCOM_RPM_PM8901_LDO0, &pm8901_nldo, "vdd_l0" }, 853 { "l1", QCOM_RPM_PM8901_LDO1, &pm8901_pldo, "vdd_l1" }, 854 { "l2", QCOM_RPM_PM8901_LDO2, &pm8901_pldo, "vdd_l2" }, 855 { "l3", QCOM_RPM_PM8901_LDO3, &pm8901_pldo, "vdd_l3" }, 856 { "l4", QCOM_RPM_PM8901_LDO4, &pm8901_pldo, "vdd_l4" }, 857 { "l5", QCOM_RPM_PM8901_LDO5, &pm8901_pldo, "vdd_l5" }, 858 { "l6", QCOM_RPM_PM8901_LDO6, &pm8901_pldo, "vdd_l6" }, 859 860 { "lvs0", QCOM_RPM_PM8901_LVS0, &pm8901_switch, "lvs0_in" }, 861 { "lvs1", QCOM_RPM_PM8901_LVS1, &pm8901_switch, "lvs1_in" }, 862 { "lvs2", QCOM_RPM_PM8901_LVS2, &pm8901_switch, "lvs2_in" }, 863 { "lvs3", QCOM_RPM_PM8901_LVS3, &pm8901_switch, "lvs3_in" }, 864 865 { "mvs", QCOM_RPM_PM8901_MVS, &pm8901_switch, "mvs_in" }, 866 { } 867 }; 868 869 static const struct rpm_regulator_data rpm_pm8921_regulators[] = { 870 { "s1", QCOM_RPM_PM8921_SMPS1, &pm8921_smps, "vdd_s1" }, 871 { "s2", QCOM_RPM_PM8921_SMPS2, &pm8921_smps, "vdd_s2" }, 872 { "s3", QCOM_RPM_PM8921_SMPS3, &pm8921_smps }, 873 { "s4", QCOM_RPM_PM8921_SMPS4, &pm8921_smps, "vdd_s4" }, 874 { "s7", QCOM_RPM_PM8921_SMPS7, &pm8921_smps, "vdd_s7" }, 875 { "s8", QCOM_RPM_PM8921_SMPS8, &pm8921_smps, "vdd_s8" }, 876 877 { "l1", QCOM_RPM_PM8921_LDO1, &pm8921_nldo, "vdd_l1_l2_l12_l18" }, 878 { "l2", QCOM_RPM_PM8921_LDO2, &pm8921_nldo, "vdd_l1_l2_l12_l18" }, 879 { "l3", QCOM_RPM_PM8921_LDO3, &pm8921_pldo, "vdd_l3_l15_l17" }, 880 { "l4", QCOM_RPM_PM8921_LDO4, &pm8921_pldo, "vdd_l4_l14" }, 881 { "l5", QCOM_RPM_PM8921_LDO5, &pm8921_pldo, "vdd_l5_l8_l16" }, 882 { "l6", QCOM_RPM_PM8921_LDO6, &pm8921_pldo, "vdd_l6_l7" }, 883 { "l7", QCOM_RPM_PM8921_LDO7, &pm8921_pldo, "vdd_l6_l7" }, 884 { "l8", QCOM_RPM_PM8921_LDO8, &pm8921_pldo, "vdd_l5_l8_l16" }, 885 { "l9", QCOM_RPM_PM8921_LDO9, &pm8921_pldo, "vdd_l9_l11" }, 886 { "l10", QCOM_RPM_PM8921_LDO10, &pm8921_pldo, "vdd_l10_l22" }, 887 { "l11", QCOM_RPM_PM8921_LDO11, &pm8921_pldo, "vdd_l9_l11" }, 888 { "l12", QCOM_RPM_PM8921_LDO12, &pm8921_nldo, "vdd_l1_l2_l12_l18" }, 889 { "l14", QCOM_RPM_PM8921_LDO14, &pm8921_pldo, "vdd_l4_l14" }, 890 { "l15", QCOM_RPM_PM8921_LDO15, &pm8921_pldo, "vdd_l3_l15_l17" }, 891 { "l16", QCOM_RPM_PM8921_LDO16, &pm8921_pldo, "vdd_l5_l8_l16" }, 892 { "l17", QCOM_RPM_PM8921_LDO17, &pm8921_pldo, "vdd_l3_l15_l17" }, 893 { "l18", QCOM_RPM_PM8921_LDO18, &pm8921_nldo, "vdd_l1_l2_l12_l18" }, 894 { "l21", QCOM_RPM_PM8921_LDO21, &pm8921_pldo, "vdd_l21_l23_l29" }, 895 { "l22", QCOM_RPM_PM8921_LDO22, &pm8921_pldo, "vdd_l10_l22" }, 896 { "l23", QCOM_RPM_PM8921_LDO23, &pm8921_pldo, "vdd_l21_l23_l29" }, 897 { "l24", QCOM_RPM_PM8921_LDO24, &pm8921_nldo1200, "vdd_l24" }, 898 { "l25", QCOM_RPM_PM8921_LDO25, &pm8921_nldo1200, "vdd_l25" }, 899 { "l26", QCOM_RPM_PM8921_LDO26, &pm8921_nldo1200, "vdd_l26" }, 900 { "l27", QCOM_RPM_PM8921_LDO27, &pm8921_nldo1200, "vdd_l27" }, 901 { "l28", QCOM_RPM_PM8921_LDO28, &pm8921_nldo1200, "vdd_l28" }, 902 { "l29", QCOM_RPM_PM8921_LDO29, &pm8921_pldo, "vdd_l21_l23_l29" }, 903 904 { "lvs1", QCOM_RPM_PM8921_LVS1, &pm8921_switch, "vin_lvs1_3_6" }, 905 { "lvs2", QCOM_RPM_PM8921_LVS2, &pm8921_switch, "vin_lvs2" }, 906 { "lvs3", QCOM_RPM_PM8921_LVS3, &pm8921_switch, "vin_lvs1_3_6" }, 907 { "lvs4", QCOM_RPM_PM8921_LVS4, &pm8921_switch, "vin_lvs4_5_7" }, 908 { "lvs5", QCOM_RPM_PM8921_LVS5, &pm8921_switch, "vin_lvs4_5_7" }, 909 { "lvs6", QCOM_RPM_PM8921_LVS6, &pm8921_switch, "vin_lvs1_3_6" }, 910 { "lvs7", QCOM_RPM_PM8921_LVS7, &pm8921_switch, "vin_lvs4_5_7" }, 911 912 { "usb-switch", QCOM_RPM_USB_OTG_SWITCH, &pm8921_switch, "vin_5vs" }, 913 { "hdmi-switch", QCOM_RPM_HDMI_SWITCH, &pm8921_switch, "vin_5vs" }, 914 { "ncp", QCOM_RPM_PM8921_NCP, &pm8921_ncp, "vdd_ncp" }, 915 { } 916 }; 917 918 static const struct rpm_regulator_data rpm_smb208_regulators[] = { 919 { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" }, 920 { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" }, 921 { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" }, 922 { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" }, 923 { } 924 }; 925 926 static const struct of_device_id rpm_of_match[] = { 927 { .compatible = "qcom,rpm-pm8018-regulators", 928 .data = &rpm_pm8018_regulators }, 929 { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators }, 930 { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators }, 931 { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators }, 932 { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators }, 933 { } 934 }; 935 MODULE_DEVICE_TABLE(of, rpm_of_match); 936 937 static int rpm_reg_probe(struct platform_device *pdev) 938 { 939 const struct rpm_regulator_data *reg; 940 struct regulator_config config = { }; 941 struct regulator_dev *rdev; 942 struct qcom_rpm_reg *vreg; 943 struct qcom_rpm *rpm; 944 945 rpm = dev_get_drvdata(pdev->dev.parent); 946 if (!rpm) { 947 dev_err(&pdev->dev, "unable to retrieve handle to rpm\n"); 948 return -ENODEV; 949 } 950 951 reg = device_get_match_data(&pdev->dev); 952 if (!reg) { 953 dev_err(&pdev->dev, "failed to match device\n"); 954 return -ENODEV; 955 } 956 957 for (; reg->name; reg++) { 958 vreg = devm_kmemdup(&pdev->dev, reg->template, sizeof(*vreg), GFP_KERNEL); 959 if (!vreg) 960 return -ENOMEM; 961 962 mutex_init(&vreg->lock); 963 964 vreg->dev = &pdev->dev; 965 vreg->resource = reg->resource; 966 vreg->rpm = rpm; 967 968 vreg->desc.id = -1; 969 vreg->desc.owner = THIS_MODULE; 970 vreg->desc.type = REGULATOR_VOLTAGE; 971 vreg->desc.name = reg->name; 972 vreg->desc.supply_name = reg->supply; 973 vreg->desc.of_match = reg->name; 974 vreg->desc.of_parse_cb = rpm_reg_of_parse; 975 976 config.dev = &pdev->dev; 977 config.driver_data = vreg; 978 rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config); 979 if (IS_ERR(rdev)) { 980 dev_err(&pdev->dev, "failed to register %s\n", reg->name); 981 return PTR_ERR(rdev); 982 } 983 } 984 985 return 0; 986 } 987 988 static struct platform_driver rpm_reg_driver = { 989 .probe = rpm_reg_probe, 990 .driver = { 991 .name = "qcom_rpm_reg", 992 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 993 .of_match_table = of_match_ptr(rpm_of_match), 994 }, 995 }; 996 997 static int __init rpm_reg_init(void) 998 { 999 return platform_driver_register(&rpm_reg_driver); 1000 } 1001 subsys_initcall(rpm_reg_init); 1002 1003 static void __exit rpm_reg_exit(void) 1004 { 1005 platform_driver_unregister(&rpm_reg_driver); 1006 } 1007 module_exit(rpm_reg_exit) 1008 1009 MODULE_DESCRIPTION("Qualcomm RPM regulator driver"); 1010 MODULE_LICENSE("GPL v2"); 1011