xref: /linux/drivers/regulator/pwm-regulator.c (revision dbcedec3a31119d7594baacc743300d127c99c56)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Regulator driver for PWM Regulators
4  *
5  * Copyright (C) 2014 - STMicroelectronics Inc.
6  *
7  * Author: Lee Jones <lee.jones@linaro.org>
8  */
9 
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/err.h>
13 #include <linux/platform_device.h>
14 #include <linux/regulator/driver.h>
15 #include <linux/regulator/machine.h>
16 #include <linux/regulator/of_regulator.h>
17 #include <linux/of.h>
18 #include <linux/pwm.h>
19 #include <linux/gpio/consumer.h>
20 
21 struct pwm_continuous_reg_data {
22 	unsigned int min_uV_dutycycle;
23 	unsigned int max_uV_dutycycle;
24 	unsigned int dutycycle_unit;
25 };
26 
27 struct pwm_regulator_data {
28 	/*  Shared */
29 	struct pwm_device *pwm;
30 
31 	/* Voltage table */
32 	struct pwm_voltages *duty_cycle_table;
33 
34 	/* Continuous mode info */
35 	struct pwm_continuous_reg_data continuous;
36 
37 	/* regulator descriptor */
38 	struct regulator_desc desc;
39 
40 	int state;
41 
42 	/* Enable GPIO */
43 	struct gpio_desc *enb_gpio;
44 };
45 
46 struct pwm_voltages {
47 	unsigned int uV;
48 	unsigned int dutycycle;
49 };
50 
51 /*
52  * Voltage table call-backs
53  */
54 static void pwm_regulator_init_state(struct regulator_dev *rdev)
55 {
56 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
57 	struct pwm_state pwm_state;
58 	unsigned int dutycycle;
59 	int i;
60 
61 	pwm_get_state(drvdata->pwm, &pwm_state);
62 	dutycycle = pwm_get_relative_duty_cycle(&pwm_state, 100);
63 
64 	for (i = 0; i < rdev->desc->n_voltages; i++) {
65 		if (dutycycle == drvdata->duty_cycle_table[i].dutycycle) {
66 			drvdata->state = i;
67 			return;
68 		}
69 	}
70 }
71 
72 static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
73 {
74 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
75 
76 	if (drvdata->state < 0)
77 		pwm_regulator_init_state(rdev);
78 
79 	return drvdata->state;
80 }
81 
82 static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
83 					 unsigned selector)
84 {
85 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
86 	struct pwm_state pstate;
87 	int ret;
88 
89 	pwm_init_state(drvdata->pwm, &pstate);
90 	pwm_set_relative_duty_cycle(&pstate,
91 			drvdata->duty_cycle_table[selector].dutycycle, 100);
92 
93 	ret = pwm_apply_might_sleep(drvdata->pwm, &pstate);
94 	if (ret) {
95 		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
96 		return ret;
97 	}
98 
99 	drvdata->state = selector;
100 
101 	return 0;
102 }
103 
104 static int pwm_regulator_list_voltage(struct regulator_dev *rdev,
105 				      unsigned selector)
106 {
107 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
108 
109 	if (selector >= rdev->desc->n_voltages)
110 		return -EINVAL;
111 
112 	return drvdata->duty_cycle_table[selector].uV;
113 }
114 
115 static int pwm_regulator_enable(struct regulator_dev *dev)
116 {
117 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
118 
119 	gpiod_set_value_cansleep(drvdata->enb_gpio, 1);
120 
121 	return pwm_enable(drvdata->pwm);
122 }
123 
124 static int pwm_regulator_disable(struct regulator_dev *dev)
125 {
126 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
127 
128 	pwm_disable(drvdata->pwm);
129 
130 	gpiod_set_value_cansleep(drvdata->enb_gpio, 0);
131 
132 	return 0;
133 }
134 
135 static int pwm_regulator_is_enabled(struct regulator_dev *dev)
136 {
137 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
138 
139 	if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio))
140 		return false;
141 
142 	return pwm_is_enabled(drvdata->pwm);
143 }
144 
145 static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
146 {
147 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
148 	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
149 	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
150 	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
151 	int min_uV = rdev->constraints->min_uV;
152 	int max_uV = rdev->constraints->max_uV;
153 	int diff_uV = max_uV - min_uV;
154 	struct pwm_state pstate;
155 	unsigned int diff_duty;
156 	unsigned int voltage;
157 
158 	pwm_get_state(drvdata->pwm, &pstate);
159 
160 	if (!pstate.enabled) {
161 		if (pstate.polarity == PWM_POLARITY_INVERSED)
162 			pstate.duty_cycle = pstate.period;
163 		else
164 			pstate.duty_cycle = 0;
165 	}
166 
167 	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
168 	if (voltage < min(max_uV_duty, min_uV_duty) ||
169 	    voltage > max(max_uV_duty, min_uV_duty))
170 		return -ENOTRECOVERABLE;
171 
172 	/*
173 	 * The dutycycle for min_uV might be greater than the one for max_uV.
174 	 * This is happening when the user needs an inversed polarity, but the
175 	 * PWM device does not support inversing it in hardware.
176 	 */
177 	if (max_uV_duty < min_uV_duty) {
178 		voltage = min_uV_duty - voltage;
179 		diff_duty = min_uV_duty - max_uV_duty;
180 	} else {
181 		voltage = voltage - min_uV_duty;
182 		diff_duty = max_uV_duty - min_uV_duty;
183 	}
184 
185 	voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty);
186 
187 	return voltage + min_uV;
188 }
189 
190 static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
191 				     int req_min_uV, int req_max_uV,
192 				     unsigned int *selector)
193 {
194 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
195 	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
196 	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
197 	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
198 	int min_uV = rdev->constraints->min_uV;
199 	int max_uV = rdev->constraints->max_uV;
200 	int diff_uV = max_uV - min_uV;
201 	struct pwm_state pstate;
202 	unsigned int diff_duty;
203 	unsigned int dutycycle;
204 	int ret;
205 
206 	pwm_init_state(drvdata->pwm, &pstate);
207 
208 	/*
209 	 * The dutycycle for min_uV might be greater than the one for max_uV.
210 	 * This is happening when the user needs an inversed polarity, but the
211 	 * PWM device does not support inversing it in hardware.
212 	 */
213 	if (max_uV_duty < min_uV_duty)
214 		diff_duty = min_uV_duty - max_uV_duty;
215 	else
216 		diff_duty = max_uV_duty - min_uV_duty;
217 
218 	dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) *
219 					  diff_duty,
220 					  diff_uV);
221 
222 	if (max_uV_duty < min_uV_duty)
223 		dutycycle = min_uV_duty - dutycycle;
224 	else
225 		dutycycle = min_uV_duty + dutycycle;
226 
227 	pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
228 
229 	ret = pwm_apply_might_sleep(drvdata->pwm, &pstate);
230 	if (ret) {
231 		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
232 		return ret;
233 	}
234 
235 	return 0;
236 }
237 
238 static const struct regulator_ops pwm_regulator_voltage_table_ops = {
239 	.set_voltage_sel = pwm_regulator_set_voltage_sel,
240 	.get_voltage_sel = pwm_regulator_get_voltage_sel,
241 	.list_voltage    = pwm_regulator_list_voltage,
242 	.map_voltage     = regulator_map_voltage_iterate,
243 	.enable          = pwm_regulator_enable,
244 	.disable         = pwm_regulator_disable,
245 	.is_enabled      = pwm_regulator_is_enabled,
246 };
247 
248 static const struct regulator_ops pwm_regulator_voltage_continuous_ops = {
249 	.get_voltage = pwm_regulator_get_voltage,
250 	.set_voltage = pwm_regulator_set_voltage,
251 	.enable          = pwm_regulator_enable,
252 	.disable         = pwm_regulator_disable,
253 	.is_enabled      = pwm_regulator_is_enabled,
254 };
255 
256 static const struct regulator_desc pwm_regulator_desc = {
257 	.name		= "pwm-regulator",
258 	.type		= REGULATOR_VOLTAGE,
259 	.owner		= THIS_MODULE,
260 	.supply_name    = "pwm",
261 };
262 
263 static int pwm_regulator_init_table(struct platform_device *pdev,
264 				    struct pwm_regulator_data *drvdata)
265 {
266 	struct device_node *np = pdev->dev.of_node;
267 	struct pwm_voltages *duty_cycle_table;
268 	unsigned int length = 0;
269 	int ret;
270 
271 	of_find_property(np, "voltage-table", &length);
272 
273 	if ((length < sizeof(*duty_cycle_table)) ||
274 	    (length % sizeof(*duty_cycle_table)))
275 		return dev_err_probe(&pdev->dev, -EINVAL,
276 				     "voltage-table length(%d) is invalid\n",
277 				     length);
278 
279 	duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL);
280 	if (!duty_cycle_table)
281 		return -ENOMEM;
282 
283 	ret = of_property_read_u32_array(np, "voltage-table",
284 					 (u32 *)duty_cycle_table,
285 					 length / sizeof(u32));
286 	if (ret)
287 		return dev_err_probe(&pdev->dev, ret,
288 				     "Failed to read voltage-table\n");
289 
290 	drvdata->state			= -ENOTRECOVERABLE;
291 	drvdata->duty_cycle_table	= duty_cycle_table;
292 	drvdata->desc.ops = &pwm_regulator_voltage_table_ops;
293 	drvdata->desc.n_voltages	= length / sizeof(*duty_cycle_table);
294 
295 	return 0;
296 }
297 
298 static int pwm_regulator_init_continuous(struct platform_device *pdev,
299 					 struct pwm_regulator_data *drvdata)
300 {
301 	u32 dutycycle_range[2] = { 0, 100 };
302 	u32 dutycycle_unit = 100;
303 
304 	drvdata->desc.ops = &pwm_regulator_voltage_continuous_ops;
305 	drvdata->desc.continuous_voltage_range = true;
306 
307 	of_property_read_u32_array(pdev->dev.of_node,
308 				   "pwm-dutycycle-range",
309 				   dutycycle_range, 2);
310 	of_property_read_u32(pdev->dev.of_node, "pwm-dutycycle-unit",
311 			     &dutycycle_unit);
312 
313 	if (dutycycle_range[0] > dutycycle_unit ||
314 	    dutycycle_range[1] > dutycycle_unit)
315 		return -EINVAL;
316 
317 	drvdata->continuous.dutycycle_unit = dutycycle_unit;
318 	drvdata->continuous.min_uV_dutycycle = dutycycle_range[0];
319 	drvdata->continuous.max_uV_dutycycle = dutycycle_range[1];
320 
321 	return 0;
322 }
323 
324 static int pwm_regulator_init_boot_on(struct platform_device *pdev,
325 				      struct pwm_regulator_data *drvdata,
326 				      const struct regulator_init_data *init_data)
327 {
328 	struct pwm_state pstate;
329 
330 	if (!init_data->constraints.boot_on || drvdata->enb_gpio)
331 		return 0;
332 
333 	pwm_get_state(drvdata->pwm, &pstate);
334 	if (pstate.enabled)
335 		return 0;
336 
337 	/*
338 	 * Update the duty cycle so the output does not change
339 	 * when the regulator core enables the regulator (and
340 	 * thus the PWM channel).
341 	 */
342 	if (pstate.polarity == PWM_POLARITY_INVERSED)
343 		pstate.duty_cycle = pstate.period;
344 	else
345 		pstate.duty_cycle = 0;
346 
347 	return pwm_apply_might_sleep(drvdata->pwm, &pstate);
348 }
349 
350 static int pwm_regulator_probe(struct platform_device *pdev)
351 {
352 	const struct regulator_init_data *init_data;
353 	struct pwm_regulator_data *drvdata;
354 	struct regulator_dev *regulator;
355 	struct regulator_config config = { };
356 	struct device_node *np = pdev->dev.of_node;
357 	enum gpiod_flags gpio_flags;
358 	int ret;
359 
360 	if (!np)
361 		return dev_err_probe(&pdev->dev, -EINVAL,
362 				     "Device Tree node missing\n");
363 
364 	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
365 	if (!drvdata)
366 		return -ENOMEM;
367 
368 	memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(drvdata->desc));
369 
370 	if (of_property_present(np, "voltage-table"))
371 		ret = pwm_regulator_init_table(pdev, drvdata);
372 	else
373 		ret = pwm_regulator_init_continuous(pdev, drvdata);
374 	if (ret)
375 		return ret;
376 
377 	init_data = of_get_regulator_init_data(&pdev->dev, np,
378 					       &drvdata->desc);
379 	if (!init_data)
380 		return -ENOMEM;
381 
382 	config.of_node = np;
383 	config.dev = &pdev->dev;
384 	config.driver_data = drvdata;
385 	config.init_data = init_data;
386 
387 	drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
388 	if (IS_ERR(drvdata->pwm))
389 		return dev_err_probe(&pdev->dev, PTR_ERR(drvdata->pwm),
390 				     "Failed to get PWM\n");
391 
392 	if (init_data->constraints.boot_on || init_data->constraints.always_on)
393 		gpio_flags = GPIOD_OUT_HIGH;
394 	else
395 		gpio_flags = GPIOD_OUT_LOW;
396 	drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
397 						    gpio_flags);
398 	if (IS_ERR(drvdata->enb_gpio)) {
399 		ret = PTR_ERR(drvdata->enb_gpio);
400 		return dev_err_probe(&pdev->dev, ret, "Failed to get enable GPIO\n");
401 	}
402 
403 	ret = pwm_adjust_config(drvdata->pwm);
404 	if (ret)
405 		return ret;
406 
407 	ret = pwm_regulator_init_boot_on(pdev, drvdata, init_data);
408 	if (ret)
409 		return dev_err_probe(&pdev->dev, ret,
410 				     "Failed to apply boot_on settings\n");
411 
412 	regulator = devm_regulator_register(&pdev->dev,
413 					    &drvdata->desc, &config);
414 	if (IS_ERR(regulator)) {
415 		ret = PTR_ERR(regulator);
416 		return dev_err_probe(&pdev->dev, ret,
417 				     "Failed to register regulator %s\n",
418 				     drvdata->desc.name);
419 	}
420 
421 	return 0;
422 }
423 
424 static const struct of_device_id __maybe_unused pwm_of_match[] = {
425 	{ .compatible = "pwm-regulator" },
426 	{ },
427 };
428 MODULE_DEVICE_TABLE(of, pwm_of_match);
429 
430 static struct platform_driver pwm_regulator_driver = {
431 	.driver = {
432 		.name		= "pwm-regulator",
433 		.probe_type	= PROBE_PREFER_ASYNCHRONOUS,
434 		.of_match_table = of_match_ptr(pwm_of_match),
435 	},
436 	.probe = pwm_regulator_probe,
437 };
438 
439 module_platform_driver(pwm_regulator_driver);
440 
441 MODULE_LICENSE("GPL");
442 MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>");
443 MODULE_DESCRIPTION("PWM Regulator Driver");
444 MODULE_ALIAS("platform:pwm-regulator");
445