1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * max8907-regulator.c -- support regulators in max8907 4 * 5 * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com> 6 * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved. 7 * 8 * Portions based on drivers/regulator/tps65910-regulator.c, 9 * Copyright 2010 Texas Instruments Inc. 10 * Author: Graeme Gregory <gg@slimlogic.co.uk> 11 * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> 12 */ 13 14 #include <linux/err.h> 15 #include <linux/init.h> 16 #include <linux/mfd/core.h> 17 #include <linux/mfd/max8907.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/platform_device.h> 21 #include <linux/regulator/driver.h> 22 #include <linux/regulator/machine.h> 23 #include <linux/regulator/of_regulator.h> 24 #include <linux/regmap.h> 25 #include <linux/slab.h> 26 27 #define MAX8907_II2RR_VERSION_MASK 0xF0 28 #define MAX8907_II2RR_VERSION_REV_A 0x00 29 #define MAX8907_II2RR_VERSION_REV_B 0x10 30 #define MAX8907_II2RR_VERSION_REV_C 0x30 31 32 struct max8907_regulator { 33 struct regulator_desc desc[MAX8907_NUM_REGULATORS]; 34 }; 35 36 #define REG_MBATT() \ 37 [MAX8907_MBATT] = { \ 38 .name = "MBATT", \ 39 .supply_name = "mbatt", \ 40 .id = MAX8907_MBATT, \ 41 .ops = &max8907_mbatt_ops, \ 42 .type = REGULATOR_VOLTAGE, \ 43 .owner = THIS_MODULE, \ 44 } 45 46 #define REG_LDO(ids, supply, base, min, max, step) \ 47 [MAX8907_##ids] = { \ 48 .name = #ids, \ 49 .supply_name = supply, \ 50 .id = MAX8907_##ids, \ 51 .n_voltages = ((max) - (min)) / (step) + 1, \ 52 .ops = &max8907_ldo_ops, \ 53 .type = REGULATOR_VOLTAGE, \ 54 .owner = THIS_MODULE, \ 55 .min_uV = (min), \ 56 .uV_step = (step), \ 57 .vsel_reg = (base) + MAX8907_VOUT, \ 58 .vsel_mask = 0x3f, \ 59 .enable_reg = (base) + MAX8907_CTL, \ 60 .enable_mask = MAX8907_MASK_LDO_EN, \ 61 } 62 63 #define REG_FIXED(ids, supply, voltage) \ 64 [MAX8907_##ids] = { \ 65 .name = #ids, \ 66 .supply_name = supply, \ 67 .id = MAX8907_##ids, \ 68 .n_voltages = 1, \ 69 .ops = &max8907_fixed_ops, \ 70 .type = REGULATOR_VOLTAGE, \ 71 .owner = THIS_MODULE, \ 72 .min_uV = (voltage), \ 73 } 74 75 #define REG_OUT5V(ids, supply, base, voltage) \ 76 [MAX8907_##ids] = { \ 77 .name = #ids, \ 78 .supply_name = supply, \ 79 .id = MAX8907_##ids, \ 80 .n_voltages = 1, \ 81 .ops = &max8907_out5v_ops, \ 82 .type = REGULATOR_VOLTAGE, \ 83 .owner = THIS_MODULE, \ 84 .min_uV = (voltage), \ 85 .enable_reg = (base), \ 86 .enable_mask = MAX8907_MASK_OUT5V_EN, \ 87 } 88 89 #define REG_BBAT(ids, supply, base, min, max, step) \ 90 [MAX8907_##ids] = { \ 91 .name = #ids, \ 92 .supply_name = supply, \ 93 .id = MAX8907_##ids, \ 94 .n_voltages = ((max) - (min)) / (step) + 1, \ 95 .ops = &max8907_bbat_ops, \ 96 .type = REGULATOR_VOLTAGE, \ 97 .owner = THIS_MODULE, \ 98 .min_uV = (min), \ 99 .uV_step = (step), \ 100 .vsel_reg = (base), \ 101 .vsel_mask = MAX8907_MASK_VBBATTCV, \ 102 } 103 104 #define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \ 105 750000, 3900000, 50000) 106 #define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \ 107 650000, 2225000, 25000) 108 109 static const struct regulator_ops max8907_mbatt_ops = { 110 }; 111 112 static const struct regulator_ops max8907_ldo_ops = { 113 .list_voltage = regulator_list_voltage_linear, 114 .set_voltage_sel = regulator_set_voltage_sel_regmap, 115 .get_voltage_sel = regulator_get_voltage_sel_regmap, 116 .enable = regulator_enable_regmap, 117 .disable = regulator_disable_regmap, 118 .is_enabled = regulator_is_enabled_regmap, 119 }; 120 121 static const struct regulator_ops max8907_ldo_hwctl_ops = { 122 .list_voltage = regulator_list_voltage_linear, 123 .set_voltage_sel = regulator_set_voltage_sel_regmap, 124 .get_voltage_sel = regulator_get_voltage_sel_regmap, 125 }; 126 127 static const struct regulator_ops max8907_fixed_ops = { 128 .list_voltage = regulator_list_voltage_linear, 129 }; 130 131 static const struct regulator_ops max8907_out5v_ops = { 132 .list_voltage = regulator_list_voltage_linear, 133 .enable = regulator_enable_regmap, 134 .disable = regulator_disable_regmap, 135 .is_enabled = regulator_is_enabled_regmap, 136 }; 137 138 static const struct regulator_ops max8907_out5v_hwctl_ops = { 139 .list_voltage = regulator_list_voltage_linear, 140 }; 141 142 static const struct regulator_ops max8907_bbat_ops = { 143 .list_voltage = regulator_list_voltage_linear, 144 .set_voltage_sel = regulator_set_voltage_sel_regmap, 145 .get_voltage_sel = regulator_get_voltage_sel_regmap, 146 }; 147 148 static const struct regulator_desc max8907_regulators[] = { 149 REG_MBATT(), 150 REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000), 151 REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500), 152 REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000), 153 LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1), 154 LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2), 155 LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3), 156 LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4), 157 LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5), 158 LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6), 159 LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7), 160 LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8), 161 LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9), 162 LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10), 163 LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11), 164 LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12), 165 LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13), 166 LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14), 167 LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15), 168 LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16), 169 LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17), 170 LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18), 171 LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19), 172 LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20), 173 REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000), 174 REG_OUT5V(OUT33V, "mbatt", MAX8907_REG_OUT33VEN, 3300000), 175 REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG, 176 2400000, 3000000, 200000), 177 REG_FIXED(SDBY, "MBATT", 1200000), 178 REG_FIXED(VRTC, "MBATT", 3300000), 179 }; 180 181 #ifdef CONFIG_OF 182 183 #define MATCH(_name, _id) \ 184 [MAX8907_##_id] = { \ 185 .name = #_name, \ 186 .driver_data = (void *)&max8907_regulators[MAX8907_##_id], \ 187 } 188 189 static struct of_regulator_match max8907_matches[] = { 190 MATCH(mbatt, MBATT), 191 MATCH(sd1, SD1), 192 MATCH(sd2, SD2), 193 MATCH(sd3, SD3), 194 MATCH(ldo1, LDO1), 195 MATCH(ldo2, LDO2), 196 MATCH(ldo3, LDO3), 197 MATCH(ldo4, LDO4), 198 MATCH(ldo5, LDO5), 199 MATCH(ldo6, LDO6), 200 MATCH(ldo7, LDO7), 201 MATCH(ldo8, LDO8), 202 MATCH(ldo9, LDO9), 203 MATCH(ldo10, LDO10), 204 MATCH(ldo11, LDO11), 205 MATCH(ldo12, LDO12), 206 MATCH(ldo13, LDO13), 207 MATCH(ldo14, LDO14), 208 MATCH(ldo15, LDO15), 209 MATCH(ldo16, LDO16), 210 MATCH(ldo17, LDO17), 211 MATCH(ldo18, LDO18), 212 MATCH(ldo19, LDO19), 213 MATCH(ldo20, LDO20), 214 MATCH(out5v, OUT5V), 215 MATCH(out33v, OUT33V), 216 MATCH(bbat, BBAT), 217 MATCH(sdby, SDBY), 218 MATCH(vrtc, VRTC), 219 }; 220 221 static int max8907_regulator_parse_dt(struct platform_device *pdev) 222 { 223 struct device_node *np, *regulators; 224 int ret; 225 226 np = pdev->dev.parent->of_node; 227 if (!np) 228 return 0; 229 230 regulators = of_get_child_by_name(np, "regulators"); 231 if (!regulators) { 232 dev_err(&pdev->dev, "regulators node not found\n"); 233 return -EINVAL; 234 } 235 236 ret = of_regulator_match(&pdev->dev, regulators, max8907_matches, 237 ARRAY_SIZE(max8907_matches)); 238 of_node_put(regulators); 239 if (ret < 0) { 240 dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", 241 ret); 242 return ret; 243 } 244 245 return 0; 246 } 247 248 static inline struct regulator_init_data *match_init_data(int index) 249 { 250 return max8907_matches[index].init_data; 251 } 252 253 static inline struct device_node *match_of_node(int index) 254 { 255 return max8907_matches[index].of_node; 256 } 257 #else 258 static int max8907_regulator_parse_dt(struct platform_device *pdev) 259 { 260 return 0; 261 } 262 263 static inline struct regulator_init_data *match_init_data(int index) 264 { 265 return NULL; 266 } 267 268 static inline struct device_node *match_of_node(int index) 269 { 270 return NULL; 271 } 272 #endif 273 274 static int max8907_regulator_probe(struct platform_device *pdev) 275 { 276 struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent); 277 struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev); 278 int ret; 279 struct max8907_regulator *pmic; 280 unsigned int val; 281 int i; 282 struct regulator_config config = {}; 283 struct regulator_init_data *idata; 284 const char *mbatt_rail_name = NULL; 285 286 ret = max8907_regulator_parse_dt(pdev); 287 if (ret) 288 return ret; 289 290 pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); 291 if (!pmic) 292 return -ENOMEM; 293 294 platform_set_drvdata(pdev, pmic); 295 296 memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc)); 297 298 /* Backwards compatibility with MAX8907B; SD1 uses different voltages */ 299 ret = regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val); 300 if (ret) 301 return ret; 302 303 if ((val & MAX8907_II2RR_VERSION_MASK) == 304 MAX8907_II2RR_VERSION_REV_B) { 305 pmic->desc[MAX8907_SD1].min_uV = 637500; 306 pmic->desc[MAX8907_SD1].uV_step = 12500; 307 pmic->desc[MAX8907_SD1].n_voltages = 308 (1425000 - 637500) / 12500 + 1; 309 } 310 311 for (i = 0; i < MAX8907_NUM_REGULATORS; i++) { 312 struct regulator_dev *rdev; 313 314 config.dev = pdev->dev.parent; 315 if (pdata) 316 idata = pdata->init_data[i]; 317 else 318 idata = match_init_data(i); 319 config.init_data = idata; 320 config.driver_data = pmic; 321 config.regmap = max8907->regmap_gen; 322 config.of_node = match_of_node(i); 323 324 switch (pmic->desc[i].id) { 325 case MAX8907_MBATT: 326 if (idata && idata->constraints.name) 327 mbatt_rail_name = idata->constraints.name; 328 else 329 mbatt_rail_name = pmic->desc[i].name; 330 break; 331 case MAX8907_BBAT: 332 case MAX8907_SDBY: 333 case MAX8907_VRTC: 334 idata->supply_regulator = mbatt_rail_name; 335 break; 336 } 337 338 if (pmic->desc[i].ops == &max8907_ldo_ops) { 339 ret = regmap_read(config.regmap, pmic->desc[i].enable_reg, 340 &val); 341 if (ret) 342 return ret; 343 344 if ((val & MAX8907_MASK_LDO_SEQ) != 345 MAX8907_MASK_LDO_SEQ) 346 pmic->desc[i].ops = &max8907_ldo_hwctl_ops; 347 } else if (pmic->desc[i].ops == &max8907_out5v_ops) { 348 ret = regmap_read(config.regmap, pmic->desc[i].enable_reg, 349 &val); 350 if (ret) 351 return ret; 352 353 if ((val & (MAX8907_MASK_OUT5V_VINEN | 354 MAX8907_MASK_OUT5V_ENSRC)) != 355 MAX8907_MASK_OUT5V_ENSRC) 356 pmic->desc[i].ops = &max8907_out5v_hwctl_ops; 357 } 358 359 rdev = devm_regulator_register(&pdev->dev, 360 &pmic->desc[i], &config); 361 if (IS_ERR(rdev)) { 362 dev_err(&pdev->dev, 363 "failed to register %s regulator\n", 364 pmic->desc[i].name); 365 return PTR_ERR(rdev); 366 } 367 } 368 369 return 0; 370 } 371 372 static struct platform_driver max8907_regulator_driver = { 373 .driver = { 374 .name = "max8907-regulator", 375 }, 376 .probe = max8907_regulator_probe, 377 }; 378 379 static int __init max8907_regulator_init(void) 380 { 381 return platform_driver_register(&max8907_regulator_driver); 382 } 383 384 subsys_initcall(max8907_regulator_init); 385 386 static void __exit max8907_reg_exit(void) 387 { 388 platform_driver_unregister(&max8907_regulator_driver); 389 } 390 391 module_exit(max8907_reg_exit); 392 393 MODULE_DESCRIPTION("MAX8907 regulator driver"); 394 MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>"); 395 MODULE_LICENSE("GPL v2"); 396 MODULE_ALIAS("platform:max8907-regulator"); 397