xref: /linux/drivers/regulator/max77503-regulator.c (revision 8e07e0e3964ca4e23ce7b68e2096fe660a888942)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (c) 2023 Analog Devices, Inc.
4  * ADI regulator driver for MAX77503.
5  */
6 
7 #include <linux/i2c.h>
8 #include <linux/module.h>
9 #include <linux/regmap.h>
10 #include <linux/regulator/driver.h>
11 #include <linux/regulator/machine.h>
12 #include <linux/regulator/of_regulator.h>
13 #include <linux/util_macros.h>
14 
15 #define MAX77503_REG_CFG			0x00
16 #define MAX77503_REG_VOUT			0x01
17 
18 #define MAX77503_BIT_EN				BIT(0)
19 #define MAX77503_BIT_CURR_LIM		BIT(3)
20 #define MAX77503_BIT_ADEN			BIT(6)
21 
22 #define MAX77503_BITS_SOFT_START	GENMASK(5, 4)
23 #define MAX77503_BITS_MX_VOUT		GENMASK(7, 0)
24 
25 #define MAX77503_AD_ENABLED			0x1
26 #define MAX77503_AD_DISABLED		0x0
27 
28 struct max77503_dev {
29 	struct device *dev;
30 	struct device_node *of_node;
31 	struct regulator_desc desc;
32 	struct regulator_dev *rdev;
33 	struct regmap *regmap;
34 };
35 
36 static const struct regmap_config max77503_regmap_config = {
37 	.reg_bits = 8,
38 	.val_bits = 8,
39 	.max_register = 0x2,
40 };
41 
42 static const struct regulator_ops max77503_buck_ops = {
43 	.list_voltage = regulator_list_voltage_linear_range,
44 	.map_voltage = regulator_map_voltage_ascend,
45 	.is_enabled = regulator_is_enabled_regmap,
46 	.enable = regulator_enable_regmap,
47 	.disable = regulator_disable_regmap,
48 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
49 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
50 	.get_current_limit = regulator_get_current_limit_regmap,
51 	.set_current_limit = regulator_set_current_limit_regmap,
52 	.set_active_discharge = regulator_set_active_discharge_regmap,
53 	.set_soft_start = regulator_set_soft_start_regmap,
54 };
55 
56 static const struct linear_range max77503_buck_ranges[] = {
57 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x54, 50000)
58 };
59 
60 static const unsigned int max77503_current_limit_table[] = {
61 	500000, 2000000
62 };
63 
64 static const struct regulator_desc max77503_regulators_desc = {
65 	.name = "max77503",
66 	.enable_reg = MAX77503_REG_CFG,
67 	.enable_mask = MAX77503_BIT_EN,
68 	.ops = &max77503_buck_ops,
69 	.type = REGULATOR_VOLTAGE,
70 	.linear_ranges = max77503_buck_ranges,
71 	.n_linear_ranges = ARRAY_SIZE(max77503_buck_ranges),
72 	.vsel_reg = MAX77503_REG_VOUT,
73 	.vsel_mask = MAX77503_BITS_MX_VOUT,
74 	.soft_start_reg = MAX77503_REG_CFG,
75 	.soft_start_mask = MAX77503_BITS_SOFT_START,
76 	.active_discharge_reg = MAX77503_REG_CFG,
77 	.active_discharge_mask = MAX77503_BIT_ADEN,
78 	.active_discharge_off = MAX77503_AD_DISABLED,
79 	.active_discharge_on = MAX77503_AD_ENABLED,
80 	.csel_reg = MAX77503_REG_CFG,
81 	.csel_mask = MAX77503_BIT_CURR_LIM,
82 	.curr_table = max77503_current_limit_table,
83 	.n_current_limits = ARRAY_SIZE(max77503_current_limit_table),
84 	.owner = THIS_MODULE,
85 };
86 
87 static int max77503_regulator_probe(struct i2c_client *client)
88 {
89 	struct device *dev = &client->dev;
90 	struct regulator_config config = {};
91 	struct regulator_dev *rdev;
92 
93 	config.dev = dev;
94 	config.of_node = dev->of_node;
95 	config.regmap = devm_regmap_init_i2c(client, &max77503_regmap_config);
96 	if (IS_ERR(config.regmap)) {
97 		dev_err(dev, "Failed to init regmap");
98 		return PTR_ERR(config.regmap);
99 	}
100 
101 	rdev = devm_regulator_register(dev, &max77503_regulators_desc, &config);
102 	if (IS_ERR(rdev)) {
103 		dev_err(dev, "Failed to register regulator MAX77503");
104 		return PTR_ERR(rdev);
105 	}
106 
107 	return 0;
108 }
109 
110 static const struct of_device_id of_max77503_match_tbl[] = {
111 	{ .compatible = "adi,max77503", },
112 	{ }
113 };
114 
115 MODULE_DEVICE_TABLE(of, of_max77503_match_tbl);
116 
117 static const struct i2c_device_id max77503_regulator_id[] = {
118 	{"max77503"},
119 	{ }
120 };
121 
122 MODULE_DEVICE_TABLE(i2c, max77503_regulator_id);
123 
124 static struct i2c_driver max77503_regulator_driver = {
125 	.driver = {
126 		.name = "max77503",
127 		.of_match_table = of_max77503_match_tbl
128 	},
129 	.probe = max77503_regulator_probe,
130 	.id_table = max77503_regulator_id,
131 };
132 
133 module_i2c_driver(max77503_regulator_driver);
134 
135 MODULE_AUTHOR("Gokhan Celik <Gokhan.Celik@analog.com>");
136 MODULE_DESCRIPTION("MAX77503 regulator driver");
137 MODULE_LICENSE("GPL");
138