1 /* 2 * LP8755 High Performance Power Management Unit : System Interface Driver 3 * (based on rev. 0.26) 4 * Copyright 2012 Texas Instruments 5 * 6 * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 */ 13 14 #include <linux/module.h> 15 #include <linux/slab.h> 16 #include <linux/i2c.h> 17 #include <linux/err.h> 18 #include <linux/irq.h> 19 #include <linux/interrupt.h> 20 #include <linux/gpio.h> 21 #include <linux/regmap.h> 22 #include <linux/uaccess.h> 23 #include <linux/regulator/driver.h> 24 #include <linux/regulator/machine.h> 25 #include <linux/platform_data/lp8755.h> 26 27 #define LP8755_REG_BUCK0 0x00 28 #define LP8755_REG_BUCK1 0x03 29 #define LP8755_REG_BUCK2 0x04 30 #define LP8755_REG_BUCK3 0x01 31 #define LP8755_REG_BUCK4 0x05 32 #define LP8755_REG_BUCK5 0x02 33 #define LP8755_REG_MAX 0xFF 34 35 #define LP8755_BUCK_EN_M BIT(7) 36 #define LP8755_BUCK_LINEAR_OUT_MAX 0x76 37 #define LP8755_BUCK_VOUT_M 0x7F 38 39 struct lp8755_mphase { 40 int nreg; 41 int buck_num[LP8755_BUCK_MAX]; 42 }; 43 44 struct lp8755_chip { 45 struct device *dev; 46 struct regmap *regmap; 47 struct lp8755_platform_data *pdata; 48 49 int irq; 50 unsigned int irqmask; 51 52 int mphase; 53 struct regulator_dev *rdev[LP8755_BUCK_MAX]; 54 }; 55 56 /** 57 *lp8755_read : read a single register value from lp8755. 58 *@pchip : device to read from 59 *@reg : register to read from 60 *@val : pointer to store read value 61 */ 62 static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg, 63 unsigned int *val) 64 { 65 return regmap_read(pchip->regmap, reg, val); 66 } 67 68 /** 69 *lp8755_write : write a single register value to lp8755. 70 *@pchip : device to write to 71 *@reg : register to write to 72 *@val : value to be written 73 */ 74 static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg, 75 unsigned int val) 76 { 77 return regmap_write(pchip->regmap, reg, val); 78 } 79 80 /** 81 *lp8755_update_bits : set the values of bit fields in lp8755 register. 82 *@pchip : device to read from 83 *@reg : register to update 84 *@mask : bitmask to be changed 85 *@val : value for bitmask 86 */ 87 static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg, 88 unsigned int mask, unsigned int val) 89 { 90 return regmap_update_bits(pchip->regmap, reg, mask, val); 91 } 92 93 static int lp8755_buck_enable_time(struct regulator_dev *rdev) 94 { 95 int ret; 96 unsigned int regval; 97 enum lp8755_bucks id = rdev_get_id(rdev); 98 struct lp8755_chip *pchip = rdev_get_drvdata(rdev); 99 100 ret = lp8755_read(pchip, 0x12 + id, ®val); 101 if (ret < 0) { 102 dev_err(pchip->dev, "i2c acceess error %s\n", __func__); 103 return ret; 104 } 105 return (regval & 0xff) * 100; 106 } 107 108 static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) 109 { 110 int ret; 111 unsigned int regbval = 0x0; 112 enum lp8755_bucks id = rdev_get_id(rdev); 113 struct lp8755_chip *pchip = rdev_get_drvdata(rdev); 114 115 switch (mode) { 116 case REGULATOR_MODE_FAST: 117 /* forced pwm mode */ 118 regbval = (0x01 << id); 119 break; 120 case REGULATOR_MODE_NORMAL: 121 /* enable automatic pwm/pfm mode */ 122 ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00); 123 if (ret < 0) 124 goto err_i2c; 125 break; 126 case REGULATOR_MODE_IDLE: 127 /* enable automatic pwm/pfm/lppfm mode */ 128 ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20); 129 if (ret < 0) 130 goto err_i2c; 131 132 ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01); 133 if (ret < 0) 134 goto err_i2c; 135 break; 136 default: 137 dev_err(pchip->dev, "Not supported buck mode %s\n", __func__); 138 /* forced pwm mode */ 139 regbval = (0x01 << id); 140 } 141 142 ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval); 143 if (ret < 0) 144 goto err_i2c; 145 return ret; 146 err_i2c: 147 dev_err(pchip->dev, "i2c acceess error %s\n", __func__); 148 return ret; 149 } 150 151 static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev) 152 { 153 int ret; 154 unsigned int regval; 155 enum lp8755_bucks id = rdev_get_id(rdev); 156 struct lp8755_chip *pchip = rdev_get_drvdata(rdev); 157 158 ret = lp8755_read(pchip, 0x06, ®val); 159 if (ret < 0) 160 goto err_i2c; 161 162 /* mode fast means forced pwm mode */ 163 if (regval & (0x01 << id)) 164 return REGULATOR_MODE_FAST; 165 166 ret = lp8755_read(pchip, 0x08 + id, ®val); 167 if (ret < 0) 168 goto err_i2c; 169 170 /* mode idle means automatic pwm/pfm/lppfm mode */ 171 if (regval & 0x20) 172 return REGULATOR_MODE_IDLE; 173 174 /* mode normal means automatic pwm/pfm mode */ 175 return REGULATOR_MODE_NORMAL; 176 177 err_i2c: 178 dev_err(pchip->dev, "i2c acceess error %s\n", __func__); 179 return 0; 180 } 181 182 static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp) 183 { 184 int ret; 185 unsigned int regval = 0x00; 186 enum lp8755_bucks id = rdev_get_id(rdev); 187 struct lp8755_chip *pchip = rdev_get_drvdata(rdev); 188 189 /* uV/us */ 190 switch (ramp) { 191 case 0 ... 230: 192 regval = 0x07; 193 break; 194 case 231 ... 470: 195 regval = 0x06; 196 break; 197 case 471 ... 940: 198 regval = 0x05; 199 break; 200 case 941 ... 1900: 201 regval = 0x04; 202 break; 203 case 1901 ... 3800: 204 regval = 0x03; 205 break; 206 case 3801 ... 7500: 207 regval = 0x02; 208 break; 209 case 7501 ... 15000: 210 regval = 0x01; 211 break; 212 case 15001 ... 30000: 213 regval = 0x00; 214 break; 215 default: 216 dev_err(pchip->dev, 217 "Not supported ramp value %d %s\n", ramp, __func__); 218 return -EINVAL; 219 } 220 221 ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval); 222 if (ret < 0) 223 goto err_i2c; 224 return ret; 225 err_i2c: 226 dev_err(pchip->dev, "i2c acceess error %s\n", __func__); 227 return ret; 228 } 229 230 static struct regulator_ops lp8755_buck_ops = { 231 .map_voltage = regulator_map_voltage_linear, 232 .list_voltage = regulator_list_voltage_linear, 233 .set_voltage_sel = regulator_set_voltage_sel_regmap, 234 .get_voltage_sel = regulator_get_voltage_sel_regmap, 235 .enable = regulator_enable_regmap, 236 .disable = regulator_disable_regmap, 237 .is_enabled = regulator_is_enabled_regmap, 238 .enable_time = lp8755_buck_enable_time, 239 .set_mode = lp8755_buck_set_mode, 240 .get_mode = lp8755_buck_get_mode, 241 .set_ramp_delay = lp8755_buck_set_ramp, 242 }; 243 244 #define lp8755_rail(_id) "lp8755_buck"#_id 245 #define lp8755_buck_init(_id)\ 246 {\ 247 .constraints = {\ 248 .name = lp8755_rail(_id),\ 249 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\ 250 .min_uV = 500000,\ 251 .max_uV = 1675000,\ 252 },\ 253 } 254 255 static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = { 256 [LP8755_BUCK0] = lp8755_buck_init(0), 257 [LP8755_BUCK1] = lp8755_buck_init(1), 258 [LP8755_BUCK2] = lp8755_buck_init(2), 259 [LP8755_BUCK3] = lp8755_buck_init(3), 260 [LP8755_BUCK4] = lp8755_buck_init(4), 261 [LP8755_BUCK5] = lp8755_buck_init(5), 262 }; 263 264 static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = { 265 { 3, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK5 } }, 266 { 6, { LP8755_BUCK0, LP8755_BUCK1, LP8755_BUCK2, LP8755_BUCK3, 267 LP8755_BUCK4, LP8755_BUCK5 } }, 268 { 5, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK4, 269 LP8755_BUCK5} }, 270 { 4, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK4, LP8755_BUCK5} }, 271 { 3, { LP8755_BUCK0, LP8755_BUCK4, LP8755_BUCK5} }, 272 { 2, { LP8755_BUCK0, LP8755_BUCK5} }, 273 { 1, { LP8755_BUCK0} }, 274 { 2, { LP8755_BUCK0, LP8755_BUCK3} }, 275 { 4, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK5} }, 276 }; 277 278 static int lp8755_init_data(struct lp8755_chip *pchip) 279 { 280 unsigned int regval; 281 int ret, icnt, buck_num; 282 struct lp8755_platform_data *pdata = pchip->pdata; 283 284 /* read back muti-phase configuration */ 285 ret = lp8755_read(pchip, 0x3D, ®val); 286 if (ret < 0) 287 goto out_i2c_error; 288 pchip->mphase = regval & 0x0F; 289 290 /* set default data based on multi-phase config */ 291 for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { 292 buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; 293 pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num]; 294 } 295 return ret; 296 297 out_i2c_error: 298 dev_err(pchip->dev, "i2c acceess error %s\n", __func__); 299 return ret; 300 } 301 302 #define lp8755_buck_desc(_id)\ 303 {\ 304 .name = lp8755_rail(_id),\ 305 .id = LP8755_BUCK##_id,\ 306 .ops = &lp8755_buck_ops,\ 307 .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\ 308 .uV_step = 10000,\ 309 .min_uV = 500000,\ 310 .type = REGULATOR_VOLTAGE,\ 311 .owner = THIS_MODULE,\ 312 .enable_reg = LP8755_REG_BUCK##_id,\ 313 .enable_mask = LP8755_BUCK_EN_M,\ 314 .vsel_reg = LP8755_REG_BUCK##_id,\ 315 .vsel_mask = LP8755_BUCK_VOUT_M,\ 316 } 317 318 static struct regulator_desc lp8755_regulators[] = { 319 lp8755_buck_desc(0), 320 lp8755_buck_desc(1), 321 lp8755_buck_desc(2), 322 lp8755_buck_desc(3), 323 lp8755_buck_desc(4), 324 lp8755_buck_desc(5), 325 }; 326 327 static int lp8755_regulator_init(struct lp8755_chip *pchip) 328 { 329 int ret, icnt, buck_num; 330 struct lp8755_platform_data *pdata = pchip->pdata; 331 struct regulator_config rconfig = { }; 332 333 rconfig.regmap = pchip->regmap; 334 rconfig.dev = pchip->dev; 335 rconfig.driver_data = pchip; 336 337 for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { 338 buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; 339 rconfig.init_data = pdata->buck_data[buck_num]; 340 rconfig.of_node = pchip->dev->of_node; 341 pchip->rdev[buck_num] = 342 devm_regulator_register(pchip->dev, 343 &lp8755_regulators[buck_num], &rconfig); 344 if (IS_ERR(pchip->rdev[buck_num])) { 345 ret = PTR_ERR(pchip->rdev[buck_num]); 346 pchip->rdev[buck_num] = NULL; 347 dev_err(pchip->dev, "regulator init failed: buck %d\n", 348 buck_num); 349 return ret; 350 } 351 } 352 353 return 0; 354 } 355 356 static irqreturn_t lp8755_irq_handler(int irq, void *data) 357 { 358 int ret, icnt; 359 unsigned int flag0, flag1; 360 struct lp8755_chip *pchip = data; 361 362 /* read flag0 register */ 363 ret = lp8755_read(pchip, 0x0D, &flag0); 364 if (ret < 0) 365 goto err_i2c; 366 /* clear flag register to pull up int. pin */ 367 ret = lp8755_write(pchip, 0x0D, 0x00); 368 if (ret < 0) 369 goto err_i2c; 370 371 /* sent power fault detection event to specific regulator */ 372 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) 373 if ((flag0 & (0x4 << icnt)) 374 && (pchip->irqmask & (0x04 << icnt)) 375 && (pchip->rdev[icnt] != NULL)) 376 regulator_notifier_call_chain(pchip->rdev[icnt], 377 LP8755_EVENT_PWR_FAULT, 378 NULL); 379 380 /* read flag1 register */ 381 ret = lp8755_read(pchip, 0x0E, &flag1); 382 if (ret < 0) 383 goto err_i2c; 384 /* clear flag register to pull up int. pin */ 385 ret = lp8755_write(pchip, 0x0E, 0x00); 386 if (ret < 0) 387 goto err_i2c; 388 389 /* send OCP event to all regualtor devices */ 390 if ((flag1 & 0x01) && (pchip->irqmask & 0x01)) 391 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) 392 if (pchip->rdev[icnt] != NULL) 393 regulator_notifier_call_chain(pchip->rdev[icnt], 394 LP8755_EVENT_OCP, 395 NULL); 396 397 /* send OVP event to all regualtor devices */ 398 if ((flag1 & 0x02) && (pchip->irqmask & 0x02)) 399 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) 400 if (pchip->rdev[icnt] != NULL) 401 regulator_notifier_call_chain(pchip->rdev[icnt], 402 LP8755_EVENT_OVP, 403 NULL); 404 return IRQ_HANDLED; 405 406 err_i2c: 407 dev_err(pchip->dev, "i2c acceess error %s\n", __func__); 408 return IRQ_NONE; 409 } 410 411 static int lp8755_int_config(struct lp8755_chip *pchip) 412 { 413 int ret; 414 unsigned int regval; 415 416 if (pchip->irq == 0) { 417 dev_warn(pchip->dev, "not use interrupt : %s\n", __func__); 418 return 0; 419 } 420 421 ret = lp8755_read(pchip, 0x0F, ®val); 422 if (ret < 0) 423 goto err_i2c; 424 pchip->irqmask = regval; 425 ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler, 426 IRQF_TRIGGER_FALLING | IRQF_ONESHOT, 427 "lp8755-irq", pchip); 428 if (ret) 429 return ret; 430 431 return ret; 432 433 err_i2c: 434 dev_err(pchip->dev, "i2c acceess error %s\n", __func__); 435 return ret; 436 } 437 438 static const struct regmap_config lp8755_regmap = { 439 .reg_bits = 8, 440 .val_bits = 8, 441 .max_register = LP8755_REG_MAX, 442 }; 443 444 static int lp8755_probe(struct i2c_client *client, 445 const struct i2c_device_id *id) 446 { 447 int ret, icnt; 448 struct lp8755_chip *pchip; 449 struct lp8755_platform_data *pdata = dev_get_platdata(&client->dev); 450 451 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { 452 dev_err(&client->dev, "i2c functionality check fail.\n"); 453 return -EOPNOTSUPP; 454 } 455 456 pchip = devm_kzalloc(&client->dev, 457 sizeof(struct lp8755_chip), GFP_KERNEL); 458 if (!pchip) 459 return -ENOMEM; 460 461 pchip->dev = &client->dev; 462 pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap); 463 if (IS_ERR(pchip->regmap)) { 464 ret = PTR_ERR(pchip->regmap); 465 dev_err(&client->dev, "fail to allocate regmap %d\n", ret); 466 return ret; 467 } 468 i2c_set_clientdata(client, pchip); 469 470 if (pdata != NULL) { 471 pchip->pdata = pdata; 472 pchip->mphase = pdata->mphase; 473 } else { 474 pchip->pdata = devm_kzalloc(pchip->dev, 475 sizeof(struct lp8755_platform_data), 476 GFP_KERNEL); 477 if (!pchip->pdata) 478 return -ENOMEM; 479 ret = lp8755_init_data(pchip); 480 if (ret < 0) { 481 dev_err(&client->dev, "fail to initialize chip\n"); 482 return ret; 483 } 484 } 485 486 ret = lp8755_regulator_init(pchip); 487 if (ret < 0) { 488 dev_err(&client->dev, "fail to initialize regulators\n"); 489 goto err; 490 } 491 492 pchip->irq = client->irq; 493 ret = lp8755_int_config(pchip); 494 if (ret < 0) { 495 dev_err(&client->dev, "fail to irq config\n"); 496 goto err; 497 } 498 499 return ret; 500 501 err: 502 /* output disable */ 503 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) 504 lp8755_write(pchip, icnt, 0x00); 505 506 return ret; 507 } 508 509 static int lp8755_remove(struct i2c_client *client) 510 { 511 int icnt; 512 struct lp8755_chip *pchip = i2c_get_clientdata(client); 513 514 for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) 515 lp8755_write(pchip, icnt, 0x00); 516 517 if (pchip->irq != 0) 518 free_irq(pchip->irq, pchip); 519 520 return 0; 521 } 522 523 static const struct i2c_device_id lp8755_id[] = { 524 {LP8755_NAME, 0}, 525 {} 526 }; 527 528 MODULE_DEVICE_TABLE(i2c, lp8755_id); 529 530 static struct i2c_driver lp8755_i2c_driver = { 531 .driver = { 532 .name = LP8755_NAME, 533 }, 534 .probe = lp8755_probe, 535 .remove = lp8755_remove, 536 .id_table = lp8755_id, 537 }; 538 539 static int __init lp8755_init(void) 540 { 541 return i2c_add_driver(&lp8755_i2c_driver); 542 } 543 544 subsys_initcall(lp8755_init); 545 546 static void __exit lp8755_exit(void) 547 { 548 i2c_del_driver(&lp8755_i2c_driver); 549 } 550 551 module_exit(lp8755_exit); 552 553 MODULE_DESCRIPTION("Texas Instruments lp8755 driver"); 554 MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>"); 555 MODULE_LICENSE("GPL v2"); 556