1 /* 2 * Regulator driver for National Semiconductors LP3972 PMIC chip 3 * 4 * Based on lp3971.c 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 */ 11 12 #include <linux/bug.h> 13 #include <linux/err.h> 14 #include <linux/i2c.h> 15 #include <linux/module.h> 16 #include <linux/kernel.h> 17 #include <linux/regulator/driver.h> 18 #include <linux/regulator/lp3972.h> 19 #include <linux/slab.h> 20 21 struct lp3972 { 22 struct device *dev; 23 struct mutex io_lock; 24 struct i2c_client *i2c; 25 int num_regulators; 26 struct regulator_dev **rdev; 27 }; 28 29 /* LP3972 Control Registers */ 30 #define LP3972_SCR_REG 0x07 31 #define LP3972_OVER1_REG 0x10 32 #define LP3972_OVSR1_REG 0x11 33 #define LP3972_OVER2_REG 0x12 34 #define LP3972_OVSR2_REG 0x13 35 #define LP3972_VCC1_REG 0x20 36 #define LP3972_ADTV1_REG 0x23 37 #define LP3972_ADTV2_REG 0x24 38 #define LP3972_AVRC_REG 0x25 39 #define LP3972_CDTC1_REG 0x26 40 #define LP3972_CDTC2_REG 0x27 41 #define LP3972_SDTV1_REG 0x29 42 #define LP3972_SDTV2_REG 0x2A 43 #define LP3972_MDTV1_REG 0x32 44 #define LP3972_MDTV2_REG 0x33 45 #define LP3972_L2VCR_REG 0x39 46 #define LP3972_L34VCR_REG 0x3A 47 #define LP3972_SCR1_REG 0x80 48 #define LP3972_SCR2_REG 0x81 49 #define LP3972_OEN3_REG 0x82 50 #define LP3972_OSR3_REG 0x83 51 #define LP3972_LOER4_REG 0x84 52 #define LP3972_B2TV_REG 0x85 53 #define LP3972_B3TV_REG 0x86 54 #define LP3972_B32RC_REG 0x87 55 #define LP3972_ISRA_REG 0x88 56 #define LP3972_BCCR_REG 0x89 57 #define LP3972_II1RR_REG 0x8E 58 #define LP3972_II2RR_REG 0x8F 59 60 #define LP3972_SYS_CONTROL1_REG LP3972_SCR1_REG 61 /* System control register 1 initial value, 62 * bits 5, 6 and 7 are EPROM programmable */ 63 #define SYS_CONTROL1_INIT_VAL 0x02 64 #define SYS_CONTROL1_INIT_MASK 0x1F 65 66 #define LP3972_VOL_CHANGE_REG LP3972_VCC1_REG 67 #define LP3972_VOL_CHANGE_FLAG_GO 0x01 68 #define LP3972_VOL_CHANGE_FLAG_MASK 0x03 69 70 /* LDO output enable mask */ 71 #define LP3972_OEN3_L1EN BIT(0) 72 #define LP3972_OVER2_LDO2_EN BIT(2) 73 #define LP3972_OVER2_LDO3_EN BIT(3) 74 #define LP3972_OVER2_LDO4_EN BIT(4) 75 #define LP3972_OVER1_S_EN BIT(2) 76 77 static const unsigned int ldo1_voltage_map[] = { 78 1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000, 79 1900000, 1925000, 1950000, 1975000, 2000000, 80 }; 81 82 static const unsigned int ldo23_voltage_map[] = { 83 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000, 84 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, 85 }; 86 87 static const unsigned int ldo4_voltage_map[] = { 88 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000, 89 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000, 90 }; 91 92 static const unsigned int ldo5_voltage_map[] = { 93 0, 0, 0, 0, 0, 850000, 875000, 900000, 94 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000, 95 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 96 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, 97 }; 98 99 static const unsigned int buck1_voltage_map[] = { 100 725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000, 101 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000, 102 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 103 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, 104 }; 105 106 static const unsigned int buck23_voltage_map[] = { 107 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, 108 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, 109 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000, 110 3000000, 3300000, 111 }; 112 113 static const int ldo_output_enable_mask[] = { 114 LP3972_OEN3_L1EN, 115 LP3972_OVER2_LDO2_EN, 116 LP3972_OVER2_LDO3_EN, 117 LP3972_OVER2_LDO4_EN, 118 LP3972_OVER1_S_EN, 119 }; 120 121 static const int ldo_output_enable_addr[] = { 122 LP3972_OEN3_REG, 123 LP3972_OVER2_REG, 124 LP3972_OVER2_REG, 125 LP3972_OVER2_REG, 126 LP3972_OVER1_REG, 127 }; 128 129 static const int ldo_vol_ctl_addr[] = { 130 LP3972_MDTV1_REG, 131 LP3972_L2VCR_REG, 132 LP3972_L34VCR_REG, 133 LP3972_L34VCR_REG, 134 LP3972_SDTV1_REG, 135 }; 136 137 static const int buck_vol_enable_addr[] = { 138 LP3972_OVER1_REG, 139 LP3972_OEN3_REG, 140 LP3972_OEN3_REG, 141 }; 142 143 static const int buck_base_addr[] = { 144 LP3972_ADTV1_REG, 145 LP3972_B2TV_REG, 146 LP3972_B3TV_REG, 147 }; 148 149 #define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x]) 150 #define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x]) 151 152 /* LDO voltage control registers shift: 153 LP3972_LDO1 -> 0, LP3972_LDO2 -> 4 154 LP3972_LDO3 -> 0, LP3972_LDO4 -> 4 155 LP3972_LDO5 -> 0 156 */ 157 #define LP3972_LDO_VOL_CONTR_SHIFT(x) (((x) & 1) << 2) 158 #define LP3972_LDO_VOL_CONTR_REG(x) (ldo_vol_ctl_addr[x]) 159 #define LP3972_LDO_VOL_CHANGE_SHIFT(x) ((x) ? 4 : 6) 160 161 #define LP3972_LDO_VOL_MASK(x) (((x) % 4) ? 0x0f : 0x1f) 162 #define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00) 163 #define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c) 164 165 #define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x]) 166 #define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x]) 167 #define LP3972_BUCK_VOL_MASK 0x1f 168 #define LP3972_BUCK_VOL_MIN_IDX(x) ((x) ? 0x01 : 0x00) 169 #define LP3972_BUCK_VOL_MAX_IDX(x) ((x) ? 0x19 : 0x1f) 170 171 static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count, 172 u16 *dest) 173 { 174 int ret; 175 176 if (count != 1) 177 return -EIO; 178 ret = i2c_smbus_read_byte_data(i2c, reg); 179 if (ret < 0) 180 return ret; 181 182 *dest = ret; 183 return 0; 184 } 185 186 static int lp3972_i2c_write(struct i2c_client *i2c, char reg, int count, 187 const u16 *src) 188 { 189 if (count != 1) 190 return -EIO; 191 return i2c_smbus_write_byte_data(i2c, reg, *src); 192 } 193 194 static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg) 195 { 196 u16 val = 0; 197 198 mutex_lock(&lp3972->io_lock); 199 200 lp3972_i2c_read(lp3972->i2c, reg, 1, &val); 201 202 dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg, 203 (unsigned)val & 0xff); 204 205 mutex_unlock(&lp3972->io_lock); 206 207 return val & 0xff; 208 } 209 210 static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val) 211 { 212 u16 tmp; 213 int ret; 214 215 mutex_lock(&lp3972->io_lock); 216 217 ret = lp3972_i2c_read(lp3972->i2c, reg, 1, &tmp); 218 tmp = (tmp & ~mask) | val; 219 if (ret == 0) { 220 ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp); 221 dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg, 222 (unsigned)val & 0xff); 223 } 224 mutex_unlock(&lp3972->io_lock); 225 226 return ret; 227 } 228 229 static int lp3972_ldo_is_enabled(struct regulator_dev *dev) 230 { 231 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 232 int ldo = rdev_get_id(dev) - LP3972_LDO1; 233 u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); 234 u16 val; 235 236 val = lp3972_reg_read(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo)); 237 return !!(val & mask); 238 } 239 240 static int lp3972_ldo_enable(struct regulator_dev *dev) 241 { 242 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 243 int ldo = rdev_get_id(dev) - LP3972_LDO1; 244 u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); 245 246 return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo), 247 mask, mask); 248 } 249 250 static int lp3972_ldo_disable(struct regulator_dev *dev) 251 { 252 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 253 int ldo = rdev_get_id(dev) - LP3972_LDO1; 254 u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); 255 256 return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo), 257 mask, 0); 258 } 259 260 static int lp3972_ldo_get_voltage(struct regulator_dev *dev) 261 { 262 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 263 int ldo = rdev_get_id(dev) - LP3972_LDO1; 264 u16 mask = LP3972_LDO_VOL_MASK(ldo); 265 u16 val, reg; 266 267 reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo)); 268 val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask; 269 270 return dev->desc->volt_table[val]; 271 } 272 273 static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev, 274 unsigned int selector) 275 { 276 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 277 int ldo = rdev_get_id(dev) - LP3972_LDO1; 278 int shift, ret; 279 280 shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo); 281 ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo), 282 LP3972_LDO_VOL_MASK(ldo) << shift, selector << shift); 283 284 if (ret) 285 return ret; 286 287 /* 288 * LDO1 and LDO5 support voltage control by either target voltage1 289 * or target voltage2 register. 290 * We use target voltage1 register for LDO1 and LDO5 in this driver. 291 * We need to update voltage change control register(0x20) to enable 292 * LDO1 and LDO5 to change to their programmed target values. 293 */ 294 switch (ldo) { 295 case LP3972_LDO1: 296 case LP3972_LDO5: 297 shift = LP3972_LDO_VOL_CHANGE_SHIFT(ldo); 298 ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, 299 LP3972_VOL_CHANGE_FLAG_MASK << shift, 300 LP3972_VOL_CHANGE_FLAG_GO << shift); 301 if (ret) 302 return ret; 303 304 ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, 305 LP3972_VOL_CHANGE_FLAG_MASK << shift, 0); 306 break; 307 } 308 309 return ret; 310 } 311 312 static struct regulator_ops lp3972_ldo_ops = { 313 .list_voltage = regulator_list_voltage_table, 314 .is_enabled = lp3972_ldo_is_enabled, 315 .enable = lp3972_ldo_enable, 316 .disable = lp3972_ldo_disable, 317 .get_voltage = lp3972_ldo_get_voltage, 318 .set_voltage_sel = lp3972_ldo_set_voltage_sel, 319 }; 320 321 static int lp3972_dcdc_is_enabled(struct regulator_dev *dev) 322 { 323 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 324 int buck = rdev_get_id(dev) - LP3972_DCDC1; 325 u16 mask = 1 << (buck * 2); 326 u16 val; 327 328 val = lp3972_reg_read(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck)); 329 return !!(val & mask); 330 } 331 332 static int lp3972_dcdc_enable(struct regulator_dev *dev) 333 { 334 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 335 int buck = rdev_get_id(dev) - LP3972_DCDC1; 336 u16 mask = 1 << (buck * 2); 337 u16 val; 338 339 val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck), 340 mask, mask); 341 return val; 342 } 343 344 static int lp3972_dcdc_disable(struct regulator_dev *dev) 345 { 346 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 347 int buck = rdev_get_id(dev) - LP3972_DCDC1; 348 u16 mask = 1 << (buck * 2); 349 u16 val; 350 351 val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck), 352 mask, 0); 353 return val; 354 } 355 356 static int lp3972_dcdc_get_voltage(struct regulator_dev *dev) 357 { 358 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 359 int buck = rdev_get_id(dev) - LP3972_DCDC1; 360 u16 reg; 361 int val; 362 363 reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck)); 364 reg &= LP3972_BUCK_VOL_MASK; 365 if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck)) 366 val = dev->desc->volt_table[reg]; 367 else { 368 val = 0; 369 dev_warn(&dev->dev, "chip reported incorrect voltage value." 370 " reg = %d\n", reg); 371 } 372 373 return val; 374 } 375 376 static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev, 377 unsigned int selector) 378 { 379 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 380 int buck = rdev_get_id(dev) - LP3972_DCDC1; 381 int ret; 382 383 ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck), 384 LP3972_BUCK_VOL_MASK, selector); 385 if (ret) 386 return ret; 387 388 if (buck != 0) 389 return ret; 390 391 ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, 392 LP3972_VOL_CHANGE_FLAG_MASK, LP3972_VOL_CHANGE_FLAG_GO); 393 if (ret) 394 return ret; 395 396 return lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, 397 LP3972_VOL_CHANGE_FLAG_MASK, 0); 398 } 399 400 static struct regulator_ops lp3972_dcdc_ops = { 401 .list_voltage = regulator_list_voltage_table, 402 .is_enabled = lp3972_dcdc_is_enabled, 403 .enable = lp3972_dcdc_enable, 404 .disable = lp3972_dcdc_disable, 405 .get_voltage = lp3972_dcdc_get_voltage, 406 .set_voltage_sel = lp3972_dcdc_set_voltage_sel, 407 }; 408 409 static const struct regulator_desc regulators[] = { 410 { 411 .name = "LDO1", 412 .id = LP3972_LDO1, 413 .ops = &lp3972_ldo_ops, 414 .n_voltages = ARRAY_SIZE(ldo1_voltage_map), 415 .volt_table = ldo1_voltage_map, 416 .type = REGULATOR_VOLTAGE, 417 .owner = THIS_MODULE, 418 }, 419 { 420 .name = "LDO2", 421 .id = LP3972_LDO2, 422 .ops = &lp3972_ldo_ops, 423 .n_voltages = ARRAY_SIZE(ldo23_voltage_map), 424 .volt_table = ldo23_voltage_map, 425 .type = REGULATOR_VOLTAGE, 426 .owner = THIS_MODULE, 427 }, 428 { 429 .name = "LDO3", 430 .id = LP3972_LDO3, 431 .ops = &lp3972_ldo_ops, 432 .n_voltages = ARRAY_SIZE(ldo23_voltage_map), 433 .volt_table = ldo23_voltage_map, 434 .type = REGULATOR_VOLTAGE, 435 .owner = THIS_MODULE, 436 }, 437 { 438 .name = "LDO4", 439 .id = LP3972_LDO4, 440 .ops = &lp3972_ldo_ops, 441 .n_voltages = ARRAY_SIZE(ldo4_voltage_map), 442 .volt_table = ldo4_voltage_map, 443 .type = REGULATOR_VOLTAGE, 444 .owner = THIS_MODULE, 445 }, 446 { 447 .name = "LDO5", 448 .id = LP3972_LDO5, 449 .ops = &lp3972_ldo_ops, 450 .n_voltages = ARRAY_SIZE(ldo5_voltage_map), 451 .volt_table = ldo5_voltage_map, 452 .type = REGULATOR_VOLTAGE, 453 .owner = THIS_MODULE, 454 }, 455 { 456 .name = "DCDC1", 457 .id = LP3972_DCDC1, 458 .ops = &lp3972_dcdc_ops, 459 .n_voltages = ARRAY_SIZE(buck1_voltage_map), 460 .volt_table = buck1_voltage_map, 461 .type = REGULATOR_VOLTAGE, 462 .owner = THIS_MODULE, 463 }, 464 { 465 .name = "DCDC2", 466 .id = LP3972_DCDC2, 467 .ops = &lp3972_dcdc_ops, 468 .n_voltages = ARRAY_SIZE(buck23_voltage_map), 469 .volt_table = buck23_voltage_map, 470 .type = REGULATOR_VOLTAGE, 471 .owner = THIS_MODULE, 472 }, 473 { 474 .name = "DCDC3", 475 .id = LP3972_DCDC3, 476 .ops = &lp3972_dcdc_ops, 477 .n_voltages = ARRAY_SIZE(buck23_voltage_map), 478 .volt_table = buck23_voltage_map, 479 .type = REGULATOR_VOLTAGE, 480 .owner = THIS_MODULE, 481 }, 482 }; 483 484 static int __devinit setup_regulators(struct lp3972 *lp3972, 485 struct lp3972_platform_data *pdata) 486 { 487 int i, err; 488 489 lp3972->num_regulators = pdata->num_regulators; 490 lp3972->rdev = kcalloc(pdata->num_regulators, 491 sizeof(struct regulator_dev *), GFP_KERNEL); 492 if (!lp3972->rdev) { 493 err = -ENOMEM; 494 goto err_nomem; 495 } 496 497 /* Instantiate the regulators */ 498 for (i = 0; i < pdata->num_regulators; i++) { 499 struct lp3972_regulator_subdev *reg = &pdata->regulators[i]; 500 struct regulator_config config = { }; 501 502 config.dev = lp3972->dev; 503 config.init_data = reg->initdata; 504 config.driver_data = lp3972; 505 506 lp3972->rdev[i] = regulator_register(®ulators[reg->id], 507 &config); 508 if (IS_ERR(lp3972->rdev[i])) { 509 err = PTR_ERR(lp3972->rdev[i]); 510 dev_err(lp3972->dev, "regulator init failed: %d\n", 511 err); 512 goto error; 513 } 514 } 515 516 return 0; 517 error: 518 while (--i >= 0) 519 regulator_unregister(lp3972->rdev[i]); 520 kfree(lp3972->rdev); 521 lp3972->rdev = NULL; 522 err_nomem: 523 return err; 524 } 525 526 static int __devinit lp3972_i2c_probe(struct i2c_client *i2c, 527 const struct i2c_device_id *id) 528 { 529 struct lp3972 *lp3972; 530 struct lp3972_platform_data *pdata = i2c->dev.platform_data; 531 int ret; 532 u16 val; 533 534 if (!pdata) { 535 dev_dbg(&i2c->dev, "No platform init data supplied\n"); 536 return -ENODEV; 537 } 538 539 lp3972 = kzalloc(sizeof(struct lp3972), GFP_KERNEL); 540 if (!lp3972) 541 return -ENOMEM; 542 543 lp3972->i2c = i2c; 544 lp3972->dev = &i2c->dev; 545 546 mutex_init(&lp3972->io_lock); 547 548 /* Detect LP3972 */ 549 ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val); 550 if (ret == 0 && 551 (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) { 552 ret = -ENODEV; 553 dev_err(&i2c->dev, "chip reported: val = 0x%x\n", val); 554 } 555 if (ret < 0) { 556 dev_err(&i2c->dev, "failed to detect device. ret = %d\n", ret); 557 goto err_detect; 558 } 559 560 ret = setup_regulators(lp3972, pdata); 561 if (ret < 0) 562 goto err_detect; 563 564 i2c_set_clientdata(i2c, lp3972); 565 return 0; 566 567 err_detect: 568 kfree(lp3972); 569 return ret; 570 } 571 572 static int __devexit lp3972_i2c_remove(struct i2c_client *i2c) 573 { 574 struct lp3972 *lp3972 = i2c_get_clientdata(i2c); 575 int i; 576 577 for (i = 0; i < lp3972->num_regulators; i++) 578 regulator_unregister(lp3972->rdev[i]); 579 kfree(lp3972->rdev); 580 kfree(lp3972); 581 582 return 0; 583 } 584 585 static const struct i2c_device_id lp3972_i2c_id[] = { 586 { "lp3972", 0 }, 587 { } 588 }; 589 MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id); 590 591 static struct i2c_driver lp3972_i2c_driver = { 592 .driver = { 593 .name = "lp3972", 594 .owner = THIS_MODULE, 595 }, 596 .probe = lp3972_i2c_probe, 597 .remove = __devexit_p(lp3972_i2c_remove), 598 .id_table = lp3972_i2c_id, 599 }; 600 601 static int __init lp3972_module_init(void) 602 { 603 return i2c_add_driver(&lp3972_i2c_driver); 604 } 605 subsys_initcall(lp3972_module_init); 606 607 static void __exit lp3972_module_exit(void) 608 { 609 i2c_del_driver(&lp3972_i2c_driver); 610 } 611 module_exit(lp3972_module_exit); 612 613 MODULE_LICENSE("GPL"); 614 MODULE_AUTHOR("Axel Lin <axel.lin@gmail.com>"); 615 MODULE_DESCRIPTION("LP3972 PMIC driver"); 616