1 /* 2 * Regulator driver for National Semiconductors LP3972 PMIC chip 3 * 4 * Based on lp3971.c 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 */ 11 12 #include <linux/bug.h> 13 #include <linux/err.h> 14 #include <linux/i2c.h> 15 #include <linux/module.h> 16 #include <linux/kernel.h> 17 #include <linux/regulator/driver.h> 18 #include <linux/regulator/lp3972.h> 19 #include <linux/slab.h> 20 21 struct lp3972 { 22 struct device *dev; 23 struct mutex io_lock; 24 struct i2c_client *i2c; 25 }; 26 27 /* LP3972 Control Registers */ 28 #define LP3972_SCR_REG 0x07 29 #define LP3972_OVER1_REG 0x10 30 #define LP3972_OVSR1_REG 0x11 31 #define LP3972_OVER2_REG 0x12 32 #define LP3972_OVSR2_REG 0x13 33 #define LP3972_VCC1_REG 0x20 34 #define LP3972_ADTV1_REG 0x23 35 #define LP3972_ADTV2_REG 0x24 36 #define LP3972_AVRC_REG 0x25 37 #define LP3972_CDTC1_REG 0x26 38 #define LP3972_CDTC2_REG 0x27 39 #define LP3972_SDTV1_REG 0x29 40 #define LP3972_SDTV2_REG 0x2A 41 #define LP3972_MDTV1_REG 0x32 42 #define LP3972_MDTV2_REG 0x33 43 #define LP3972_L2VCR_REG 0x39 44 #define LP3972_L34VCR_REG 0x3A 45 #define LP3972_SCR1_REG 0x80 46 #define LP3972_SCR2_REG 0x81 47 #define LP3972_OEN3_REG 0x82 48 #define LP3972_OSR3_REG 0x83 49 #define LP3972_LOER4_REG 0x84 50 #define LP3972_B2TV_REG 0x85 51 #define LP3972_B3TV_REG 0x86 52 #define LP3972_B32RC_REG 0x87 53 #define LP3972_ISRA_REG 0x88 54 #define LP3972_BCCR_REG 0x89 55 #define LP3972_II1RR_REG 0x8E 56 #define LP3972_II2RR_REG 0x8F 57 58 #define LP3972_SYS_CONTROL1_REG LP3972_SCR1_REG 59 /* System control register 1 initial value, 60 * bits 5, 6 and 7 are EPROM programmable */ 61 #define SYS_CONTROL1_INIT_VAL 0x02 62 #define SYS_CONTROL1_INIT_MASK 0x1F 63 64 #define LP3972_VOL_CHANGE_REG LP3972_VCC1_REG 65 #define LP3972_VOL_CHANGE_FLAG_GO 0x01 66 #define LP3972_VOL_CHANGE_FLAG_MASK 0x03 67 68 /* LDO output enable mask */ 69 #define LP3972_OEN3_L1EN BIT(0) 70 #define LP3972_OVER2_LDO2_EN BIT(2) 71 #define LP3972_OVER2_LDO3_EN BIT(3) 72 #define LP3972_OVER2_LDO4_EN BIT(4) 73 #define LP3972_OVER1_S_EN BIT(2) 74 75 static const unsigned int ldo1_voltage_map[] = { 76 1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000, 77 1900000, 1925000, 1950000, 1975000, 2000000, 78 }; 79 80 static const unsigned int ldo23_voltage_map[] = { 81 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000, 82 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, 83 }; 84 85 static const unsigned int ldo4_voltage_map[] = { 86 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000, 87 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000, 88 }; 89 90 static const unsigned int ldo5_voltage_map[] = { 91 0, 0, 0, 0, 0, 850000, 875000, 900000, 92 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000, 93 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 94 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, 95 }; 96 97 static const unsigned int buck1_voltage_map[] = { 98 725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000, 99 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000, 100 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 101 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, 102 }; 103 104 static const unsigned int buck23_voltage_map[] = { 105 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, 106 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, 107 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000, 108 3000000, 3300000, 109 }; 110 111 static const int ldo_output_enable_mask[] = { 112 LP3972_OEN3_L1EN, 113 LP3972_OVER2_LDO2_EN, 114 LP3972_OVER2_LDO3_EN, 115 LP3972_OVER2_LDO4_EN, 116 LP3972_OVER1_S_EN, 117 }; 118 119 static const int ldo_output_enable_addr[] = { 120 LP3972_OEN3_REG, 121 LP3972_OVER2_REG, 122 LP3972_OVER2_REG, 123 LP3972_OVER2_REG, 124 LP3972_OVER1_REG, 125 }; 126 127 static const int ldo_vol_ctl_addr[] = { 128 LP3972_MDTV1_REG, 129 LP3972_L2VCR_REG, 130 LP3972_L34VCR_REG, 131 LP3972_L34VCR_REG, 132 LP3972_SDTV1_REG, 133 }; 134 135 static const int buck_vol_enable_addr[] = { 136 LP3972_OVER1_REG, 137 LP3972_OEN3_REG, 138 LP3972_OEN3_REG, 139 }; 140 141 static const int buck_base_addr[] = { 142 LP3972_ADTV1_REG, 143 LP3972_B2TV_REG, 144 LP3972_B3TV_REG, 145 }; 146 147 #define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x]) 148 #define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x]) 149 150 /* LDO voltage control registers shift: 151 LP3972_LDO1 -> 0, LP3972_LDO2 -> 4 152 LP3972_LDO3 -> 0, LP3972_LDO4 -> 4 153 LP3972_LDO5 -> 0 154 */ 155 #define LP3972_LDO_VOL_CONTR_SHIFT(x) (((x) & 1) << 2) 156 #define LP3972_LDO_VOL_CONTR_REG(x) (ldo_vol_ctl_addr[x]) 157 #define LP3972_LDO_VOL_CHANGE_SHIFT(x) ((x) ? 4 : 6) 158 159 #define LP3972_LDO_VOL_MASK(x) (((x) % 4) ? 0x0f : 0x1f) 160 #define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00) 161 #define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c) 162 163 #define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x]) 164 #define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x]) 165 #define LP3972_BUCK_VOL_MASK 0x1f 166 167 static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count, 168 u16 *dest) 169 { 170 int ret; 171 172 if (count != 1) 173 return -EIO; 174 ret = i2c_smbus_read_byte_data(i2c, reg); 175 if (ret < 0) 176 return ret; 177 178 *dest = ret; 179 return 0; 180 } 181 182 static int lp3972_i2c_write(struct i2c_client *i2c, char reg, int count, 183 const u16 *src) 184 { 185 if (count != 1) 186 return -EIO; 187 return i2c_smbus_write_byte_data(i2c, reg, *src); 188 } 189 190 static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg) 191 { 192 u16 val = 0; 193 194 mutex_lock(&lp3972->io_lock); 195 196 lp3972_i2c_read(lp3972->i2c, reg, 1, &val); 197 198 dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg, 199 (unsigned)val & 0xff); 200 201 mutex_unlock(&lp3972->io_lock); 202 203 return val & 0xff; 204 } 205 206 static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val) 207 { 208 u16 tmp; 209 int ret; 210 211 mutex_lock(&lp3972->io_lock); 212 213 ret = lp3972_i2c_read(lp3972->i2c, reg, 1, &tmp); 214 tmp = (tmp & ~mask) | val; 215 if (ret == 0) { 216 ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp); 217 dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg, 218 (unsigned)val & 0xff); 219 } 220 mutex_unlock(&lp3972->io_lock); 221 222 return ret; 223 } 224 225 static int lp3972_ldo_is_enabled(struct regulator_dev *dev) 226 { 227 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 228 int ldo = rdev_get_id(dev) - LP3972_LDO1; 229 u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); 230 u16 val; 231 232 val = lp3972_reg_read(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo)); 233 return !!(val & mask); 234 } 235 236 static int lp3972_ldo_enable(struct regulator_dev *dev) 237 { 238 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 239 int ldo = rdev_get_id(dev) - LP3972_LDO1; 240 u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); 241 242 return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo), 243 mask, mask); 244 } 245 246 static int lp3972_ldo_disable(struct regulator_dev *dev) 247 { 248 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 249 int ldo = rdev_get_id(dev) - LP3972_LDO1; 250 u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); 251 252 return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo), 253 mask, 0); 254 } 255 256 static int lp3972_ldo_get_voltage_sel(struct regulator_dev *dev) 257 { 258 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 259 int ldo = rdev_get_id(dev) - LP3972_LDO1; 260 u16 mask = LP3972_LDO_VOL_MASK(ldo); 261 u16 val, reg; 262 263 reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo)); 264 val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask; 265 266 return val; 267 } 268 269 static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev, 270 unsigned int selector) 271 { 272 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 273 int ldo = rdev_get_id(dev) - LP3972_LDO1; 274 int shift, ret; 275 276 shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo); 277 ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo), 278 LP3972_LDO_VOL_MASK(ldo) << shift, selector << shift); 279 280 if (ret) 281 return ret; 282 283 /* 284 * LDO1 and LDO5 support voltage control by either target voltage1 285 * or target voltage2 register. 286 * We use target voltage1 register for LDO1 and LDO5 in this driver. 287 * We need to update voltage change control register(0x20) to enable 288 * LDO1 and LDO5 to change to their programmed target values. 289 */ 290 switch (ldo) { 291 case LP3972_LDO1: 292 case LP3972_LDO5: 293 shift = LP3972_LDO_VOL_CHANGE_SHIFT(ldo); 294 ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, 295 LP3972_VOL_CHANGE_FLAG_MASK << shift, 296 LP3972_VOL_CHANGE_FLAG_GO << shift); 297 if (ret) 298 return ret; 299 300 ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, 301 LP3972_VOL_CHANGE_FLAG_MASK << shift, 0); 302 break; 303 } 304 305 return ret; 306 } 307 308 static struct regulator_ops lp3972_ldo_ops = { 309 .list_voltage = regulator_list_voltage_table, 310 .map_voltage = regulator_map_voltage_ascend, 311 .is_enabled = lp3972_ldo_is_enabled, 312 .enable = lp3972_ldo_enable, 313 .disable = lp3972_ldo_disable, 314 .get_voltage_sel = lp3972_ldo_get_voltage_sel, 315 .set_voltage_sel = lp3972_ldo_set_voltage_sel, 316 }; 317 318 static int lp3972_dcdc_is_enabled(struct regulator_dev *dev) 319 { 320 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 321 int buck = rdev_get_id(dev) - LP3972_DCDC1; 322 u16 mask = 1 << (buck * 2); 323 u16 val; 324 325 val = lp3972_reg_read(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck)); 326 return !!(val & mask); 327 } 328 329 static int lp3972_dcdc_enable(struct regulator_dev *dev) 330 { 331 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 332 int buck = rdev_get_id(dev) - LP3972_DCDC1; 333 u16 mask = 1 << (buck * 2); 334 u16 val; 335 336 val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck), 337 mask, mask); 338 return val; 339 } 340 341 static int lp3972_dcdc_disable(struct regulator_dev *dev) 342 { 343 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 344 int buck = rdev_get_id(dev) - LP3972_DCDC1; 345 u16 mask = 1 << (buck * 2); 346 u16 val; 347 348 val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck), 349 mask, 0); 350 return val; 351 } 352 353 static int lp3972_dcdc_get_voltage_sel(struct regulator_dev *dev) 354 { 355 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 356 int buck = rdev_get_id(dev) - LP3972_DCDC1; 357 u16 reg; 358 359 reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck)); 360 reg &= LP3972_BUCK_VOL_MASK; 361 362 return reg; 363 } 364 365 static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev, 366 unsigned int selector) 367 { 368 struct lp3972 *lp3972 = rdev_get_drvdata(dev); 369 int buck = rdev_get_id(dev) - LP3972_DCDC1; 370 int ret; 371 372 ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck), 373 LP3972_BUCK_VOL_MASK, selector); 374 if (ret) 375 return ret; 376 377 if (buck != 0) 378 return ret; 379 380 ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, 381 LP3972_VOL_CHANGE_FLAG_MASK, LP3972_VOL_CHANGE_FLAG_GO); 382 if (ret) 383 return ret; 384 385 return lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, 386 LP3972_VOL_CHANGE_FLAG_MASK, 0); 387 } 388 389 static struct regulator_ops lp3972_dcdc_ops = { 390 .list_voltage = regulator_list_voltage_table, 391 .map_voltage = regulator_map_voltage_ascend, 392 .is_enabled = lp3972_dcdc_is_enabled, 393 .enable = lp3972_dcdc_enable, 394 .disable = lp3972_dcdc_disable, 395 .get_voltage_sel = lp3972_dcdc_get_voltage_sel, 396 .set_voltage_sel = lp3972_dcdc_set_voltage_sel, 397 }; 398 399 static const struct regulator_desc regulators[] = { 400 { 401 .name = "LDO1", 402 .id = LP3972_LDO1, 403 .ops = &lp3972_ldo_ops, 404 .n_voltages = ARRAY_SIZE(ldo1_voltage_map), 405 .volt_table = ldo1_voltage_map, 406 .type = REGULATOR_VOLTAGE, 407 .owner = THIS_MODULE, 408 }, 409 { 410 .name = "LDO2", 411 .id = LP3972_LDO2, 412 .ops = &lp3972_ldo_ops, 413 .n_voltages = ARRAY_SIZE(ldo23_voltage_map), 414 .volt_table = ldo23_voltage_map, 415 .type = REGULATOR_VOLTAGE, 416 .owner = THIS_MODULE, 417 }, 418 { 419 .name = "LDO3", 420 .id = LP3972_LDO3, 421 .ops = &lp3972_ldo_ops, 422 .n_voltages = ARRAY_SIZE(ldo23_voltage_map), 423 .volt_table = ldo23_voltage_map, 424 .type = REGULATOR_VOLTAGE, 425 .owner = THIS_MODULE, 426 }, 427 { 428 .name = "LDO4", 429 .id = LP3972_LDO4, 430 .ops = &lp3972_ldo_ops, 431 .n_voltages = ARRAY_SIZE(ldo4_voltage_map), 432 .volt_table = ldo4_voltage_map, 433 .type = REGULATOR_VOLTAGE, 434 .owner = THIS_MODULE, 435 }, 436 { 437 .name = "LDO5", 438 .id = LP3972_LDO5, 439 .ops = &lp3972_ldo_ops, 440 .n_voltages = ARRAY_SIZE(ldo5_voltage_map), 441 .volt_table = ldo5_voltage_map, 442 .type = REGULATOR_VOLTAGE, 443 .owner = THIS_MODULE, 444 }, 445 { 446 .name = "DCDC1", 447 .id = LP3972_DCDC1, 448 .ops = &lp3972_dcdc_ops, 449 .n_voltages = ARRAY_SIZE(buck1_voltage_map), 450 .volt_table = buck1_voltage_map, 451 .type = REGULATOR_VOLTAGE, 452 .owner = THIS_MODULE, 453 }, 454 { 455 .name = "DCDC2", 456 .id = LP3972_DCDC2, 457 .ops = &lp3972_dcdc_ops, 458 .n_voltages = ARRAY_SIZE(buck23_voltage_map), 459 .volt_table = buck23_voltage_map, 460 .type = REGULATOR_VOLTAGE, 461 .owner = THIS_MODULE, 462 }, 463 { 464 .name = "DCDC3", 465 .id = LP3972_DCDC3, 466 .ops = &lp3972_dcdc_ops, 467 .n_voltages = ARRAY_SIZE(buck23_voltage_map), 468 .volt_table = buck23_voltage_map, 469 .type = REGULATOR_VOLTAGE, 470 .owner = THIS_MODULE, 471 }, 472 }; 473 474 static int setup_regulators(struct lp3972 *lp3972, 475 struct lp3972_platform_data *pdata) 476 { 477 int i, err; 478 479 /* Instantiate the regulators */ 480 for (i = 0; i < pdata->num_regulators; i++) { 481 struct lp3972_regulator_subdev *reg = &pdata->regulators[i]; 482 struct regulator_config config = { }; 483 struct regulator_dev *rdev; 484 485 config.dev = lp3972->dev; 486 config.init_data = reg->initdata; 487 config.driver_data = lp3972; 488 489 rdev = devm_regulator_register(lp3972->dev, 490 ®ulators[reg->id], &config); 491 if (IS_ERR(rdev)) { 492 err = PTR_ERR(rdev); 493 dev_err(lp3972->dev, "regulator init failed: %d\n", 494 err); 495 return err; 496 } 497 } 498 499 return 0; 500 } 501 502 static int lp3972_i2c_probe(struct i2c_client *i2c, 503 const struct i2c_device_id *id) 504 { 505 struct lp3972 *lp3972; 506 struct lp3972_platform_data *pdata = dev_get_platdata(&i2c->dev); 507 int ret; 508 u16 val; 509 510 if (!pdata) { 511 dev_dbg(&i2c->dev, "No platform init data supplied\n"); 512 return -ENODEV; 513 } 514 515 lp3972 = devm_kzalloc(&i2c->dev, sizeof(struct lp3972), GFP_KERNEL); 516 if (!lp3972) 517 return -ENOMEM; 518 519 lp3972->i2c = i2c; 520 lp3972->dev = &i2c->dev; 521 522 mutex_init(&lp3972->io_lock); 523 524 /* Detect LP3972 */ 525 ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val); 526 if (ret == 0 && 527 (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) { 528 ret = -ENODEV; 529 dev_err(&i2c->dev, "chip reported: val = 0x%x\n", val); 530 } 531 if (ret < 0) { 532 dev_err(&i2c->dev, "failed to detect device. ret = %d\n", ret); 533 return ret; 534 } 535 536 ret = setup_regulators(lp3972, pdata); 537 if (ret < 0) 538 return ret; 539 540 i2c_set_clientdata(i2c, lp3972); 541 return 0; 542 } 543 544 static const struct i2c_device_id lp3972_i2c_id[] = { 545 { "lp3972", 0 }, 546 { } 547 }; 548 MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id); 549 550 static struct i2c_driver lp3972_i2c_driver = { 551 .driver = { 552 .name = "lp3972", 553 }, 554 .probe = lp3972_i2c_probe, 555 .id_table = lp3972_i2c_id, 556 }; 557 558 static int __init lp3972_module_init(void) 559 { 560 return i2c_add_driver(&lp3972_i2c_driver); 561 } 562 subsys_initcall(lp3972_module_init); 563 564 static void __exit lp3972_module_exit(void) 565 { 566 i2c_del_driver(&lp3972_i2c_driver); 567 } 568 module_exit(lp3972_module_exit); 569 570 MODULE_LICENSE("GPL"); 571 MODULE_AUTHOR("Axel Lin <axel.lin@gmail.com>"); 572 MODULE_DESCRIPTION("LP3972 PMIC driver"); 573