1 /* 2 * FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver. 3 * 4 * Supported Part Numbers: 5 * FAN53555UC00X/01X/03X/04X/05X 6 * 7 * Copyright (c) 2012 Marvell Technology Ltd. 8 * Yunfan Zhang <yfzhang@marvell.com> 9 * 10 * This package is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13 * 14 */ 15 #include <linux/module.h> 16 #include <linux/param.h> 17 #include <linux/err.h> 18 #include <linux/platform_device.h> 19 #include <linux/regulator/driver.h> 20 #include <linux/regulator/machine.h> 21 #include <linux/regulator/of_regulator.h> 22 #include <linux/of_device.h> 23 #include <linux/i2c.h> 24 #include <linux/slab.h> 25 #include <linux/regmap.h> 26 #include <linux/regulator/fan53555.h> 27 28 /* Voltage setting */ 29 #define FAN53555_VSEL0 0x00 30 #define FAN53555_VSEL1 0x01 31 /* Control register */ 32 #define FAN53555_CONTROL 0x02 33 /* IC Type */ 34 #define FAN53555_ID1 0x03 35 /* IC mask version */ 36 #define FAN53555_ID2 0x04 37 /* Monitor register */ 38 #define FAN53555_MONITOR 0x05 39 40 /* VSEL bit definitions */ 41 #define VSEL_BUCK_EN (1 << 7) 42 #define VSEL_MODE (1 << 6) 43 #define VSEL_NSEL_MASK 0x3F 44 /* Chip ID and Verison */ 45 #define DIE_ID 0x0F /* ID1 */ 46 #define DIE_REV 0x0F /* ID2 */ 47 /* Control bit definitions */ 48 #define CTL_OUTPUT_DISCHG (1 << 7) 49 #define CTL_SLEW_MASK (0x7 << 4) 50 #define CTL_SLEW_SHIFT 4 51 #define CTL_RESET (1 << 2) 52 53 #define FAN53555_NVOLTAGES 64 /* Numbers of voltages */ 54 55 enum fan53555_vendor { 56 FAN53555_VENDOR_FAIRCHILD = 0, 57 FAN53555_VENDOR_SILERGY, 58 }; 59 60 /* IC Type */ 61 enum { 62 FAN53555_CHIP_ID_00 = 0, 63 FAN53555_CHIP_ID_01, 64 FAN53555_CHIP_ID_02, 65 FAN53555_CHIP_ID_03, 66 FAN53555_CHIP_ID_04, 67 FAN53555_CHIP_ID_05, 68 }; 69 70 enum { 71 SILERGY_SYR82X = 8, 72 }; 73 74 struct fan53555_device_info { 75 enum fan53555_vendor vendor; 76 struct regmap *regmap; 77 struct device *dev; 78 struct regulator_desc desc; 79 struct regulator_dev *rdev; 80 struct regulator_init_data *regulator; 81 /* IC Type and Rev */ 82 int chip_id; 83 int chip_rev; 84 /* Voltage setting register */ 85 unsigned int vol_reg; 86 unsigned int sleep_reg; 87 /* Voltage range and step(linear) */ 88 unsigned int vsel_min; 89 unsigned int vsel_step; 90 /* Voltage slew rate limiting */ 91 unsigned int slew_rate; 92 /* Sleep voltage cache */ 93 unsigned int sleep_vol_cache; 94 }; 95 96 static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) 97 { 98 struct fan53555_device_info *di = rdev_get_drvdata(rdev); 99 int ret; 100 101 if (di->sleep_vol_cache == uV) 102 return 0; 103 ret = regulator_map_voltage_linear(rdev, uV, uV); 104 if (ret < 0) 105 return ret; 106 ret = regmap_update_bits(di->regmap, di->sleep_reg, 107 VSEL_NSEL_MASK, ret); 108 if (ret < 0) 109 return ret; 110 /* Cache the sleep voltage setting. 111 * Might not be the real voltage which is rounded */ 112 di->sleep_vol_cache = uV; 113 114 return 0; 115 } 116 117 static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) 118 { 119 struct fan53555_device_info *di = rdev_get_drvdata(rdev); 120 121 switch (mode) { 122 case REGULATOR_MODE_FAST: 123 regmap_update_bits(di->regmap, di->vol_reg, 124 VSEL_MODE, VSEL_MODE); 125 break; 126 case REGULATOR_MODE_NORMAL: 127 regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0); 128 break; 129 default: 130 return -EINVAL; 131 } 132 return 0; 133 } 134 135 static unsigned int fan53555_get_mode(struct regulator_dev *rdev) 136 { 137 struct fan53555_device_info *di = rdev_get_drvdata(rdev); 138 unsigned int val; 139 int ret = 0; 140 141 ret = regmap_read(di->regmap, di->vol_reg, &val); 142 if (ret < 0) 143 return ret; 144 if (val & VSEL_MODE) 145 return REGULATOR_MODE_FAST; 146 else 147 return REGULATOR_MODE_NORMAL; 148 } 149 150 static int slew_rates[] = { 151 64000, 152 32000, 153 16000, 154 8000, 155 4000, 156 2000, 157 1000, 158 500, 159 }; 160 161 static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp) 162 { 163 struct fan53555_device_info *di = rdev_get_drvdata(rdev); 164 int regval = -1, i; 165 166 for (i = 0; i < ARRAY_SIZE(slew_rates); i++) { 167 if (ramp <= slew_rates[i]) 168 regval = i; 169 else 170 break; 171 } 172 173 if (regval < 0) { 174 dev_err(di->dev, "unsupported ramp value %d\n", ramp); 175 return -EINVAL; 176 } 177 178 return regmap_update_bits(di->regmap, FAN53555_CONTROL, 179 CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT); 180 } 181 182 static struct regulator_ops fan53555_regulator_ops = { 183 .set_voltage_sel = regulator_set_voltage_sel_regmap, 184 .get_voltage_sel = regulator_get_voltage_sel_regmap, 185 .map_voltage = regulator_map_voltage_linear, 186 .list_voltage = regulator_list_voltage_linear, 187 .set_suspend_voltage = fan53555_set_suspend_voltage, 188 .enable = regulator_enable_regmap, 189 .disable = regulator_disable_regmap, 190 .is_enabled = regulator_is_enabled_regmap, 191 .set_mode = fan53555_set_mode, 192 .get_mode = fan53555_get_mode, 193 .set_ramp_delay = fan53555_set_ramp, 194 }; 195 196 static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di) 197 { 198 /* Init voltage range and step */ 199 switch (di->chip_id) { 200 case FAN53555_CHIP_ID_00: 201 case FAN53555_CHIP_ID_01: 202 case FAN53555_CHIP_ID_03: 203 case FAN53555_CHIP_ID_05: 204 di->vsel_min = 600000; 205 di->vsel_step = 10000; 206 break; 207 case FAN53555_CHIP_ID_04: 208 di->vsel_min = 603000; 209 di->vsel_step = 12826; 210 break; 211 default: 212 dev_err(di->dev, 213 "Chip ID %d not supported!\n", di->chip_id); 214 return -EINVAL; 215 } 216 217 return 0; 218 } 219 220 static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di) 221 { 222 /* Init voltage range and step */ 223 switch (di->chip_id) { 224 case SILERGY_SYR82X: 225 di->vsel_min = 712500; 226 di->vsel_step = 12500; 227 break; 228 default: 229 dev_err(di->dev, 230 "Chip ID %d not supported!\n", di->chip_id); 231 return -EINVAL; 232 } 233 234 return 0; 235 } 236 237 /* For 00,01,03,05 options: 238 * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V. 239 * For 04 option: 240 * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V. 241 * */ 242 static int fan53555_device_setup(struct fan53555_device_info *di, 243 struct fan53555_platform_data *pdata) 244 { 245 int ret = 0; 246 247 /* Setup voltage control register */ 248 switch (pdata->sleep_vsel_id) { 249 case FAN53555_VSEL_ID_0: 250 di->sleep_reg = FAN53555_VSEL0; 251 di->vol_reg = FAN53555_VSEL1; 252 break; 253 case FAN53555_VSEL_ID_1: 254 di->sleep_reg = FAN53555_VSEL1; 255 di->vol_reg = FAN53555_VSEL0; 256 break; 257 default: 258 dev_err(di->dev, "Invalid VSEL ID!\n"); 259 return -EINVAL; 260 } 261 262 switch (di->vendor) { 263 case FAN53555_VENDOR_FAIRCHILD: 264 ret = fan53555_voltages_setup_fairchild(di); 265 break; 266 case FAN53555_VENDOR_SILERGY: 267 ret = fan53555_voltages_setup_silergy(di); 268 break; 269 default: 270 dev_err(di->dev, "vendor %d not supported!\n", di->vendor); 271 return -EINVAL; 272 } 273 274 return ret; 275 } 276 277 static int fan53555_regulator_register(struct fan53555_device_info *di, 278 struct regulator_config *config) 279 { 280 struct regulator_desc *rdesc = &di->desc; 281 282 rdesc->name = "fan53555-reg"; 283 rdesc->supply_name = "vin"; 284 rdesc->ops = &fan53555_regulator_ops; 285 rdesc->type = REGULATOR_VOLTAGE; 286 rdesc->n_voltages = FAN53555_NVOLTAGES; 287 rdesc->enable_reg = di->vol_reg; 288 rdesc->enable_mask = VSEL_BUCK_EN; 289 rdesc->min_uV = di->vsel_min; 290 rdesc->uV_step = di->vsel_step; 291 rdesc->vsel_reg = di->vol_reg; 292 rdesc->vsel_mask = VSEL_NSEL_MASK; 293 rdesc->owner = THIS_MODULE; 294 295 di->rdev = devm_regulator_register(di->dev, &di->desc, config); 296 return PTR_ERR_OR_ZERO(di->rdev); 297 } 298 299 static struct regmap_config fan53555_regmap_config = { 300 .reg_bits = 8, 301 .val_bits = 8, 302 }; 303 304 static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev, 305 struct device_node *np, 306 const struct regulator_desc *desc) 307 { 308 struct fan53555_platform_data *pdata; 309 int ret; 310 u32 tmp; 311 312 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); 313 if (!pdata) 314 return NULL; 315 316 pdata->regulator = of_get_regulator_init_data(dev, np, desc); 317 318 ret = of_property_read_u32(np, "fcs,suspend-voltage-selector", 319 &tmp); 320 if (!ret) 321 pdata->sleep_vsel_id = tmp; 322 323 return pdata; 324 } 325 326 static const struct of_device_id fan53555_dt_ids[] = { 327 { 328 .compatible = "fcs,fan53555", 329 .data = (void *)FAN53555_VENDOR_FAIRCHILD 330 }, { 331 .compatible = "silergy,syr827", 332 .data = (void *)FAN53555_VENDOR_SILERGY, 333 }, { 334 .compatible = "silergy,syr828", 335 .data = (void *)FAN53555_VENDOR_SILERGY, 336 }, 337 { } 338 }; 339 MODULE_DEVICE_TABLE(of, fan53555_dt_ids); 340 341 static int fan53555_regulator_probe(struct i2c_client *client, 342 const struct i2c_device_id *id) 343 { 344 struct device_node *np = client->dev.of_node; 345 struct fan53555_device_info *di; 346 struct fan53555_platform_data *pdata; 347 struct regulator_config config = { }; 348 unsigned int val; 349 int ret; 350 351 di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info), 352 GFP_KERNEL); 353 if (!di) 354 return -ENOMEM; 355 356 pdata = dev_get_platdata(&client->dev); 357 if (!pdata) 358 pdata = fan53555_parse_dt(&client->dev, np, &di->desc); 359 360 if (!pdata || !pdata->regulator) { 361 dev_err(&client->dev, "Platform data not found!\n"); 362 return -ENODEV; 363 } 364 365 di->regulator = pdata->regulator; 366 if (client->dev.of_node) { 367 const struct of_device_id *match; 368 369 match = of_match_device(of_match_ptr(fan53555_dt_ids), 370 &client->dev); 371 if (!match) 372 return -ENODEV; 373 374 di->vendor = (unsigned long) match->data; 375 } else { 376 /* if no ramp constraint set, get the pdata ramp_delay */ 377 if (!di->regulator->constraints.ramp_delay) { 378 int slew_idx = (pdata->slew_rate & 0x7) 379 ? pdata->slew_rate : 0; 380 381 di->regulator->constraints.ramp_delay 382 = slew_rates[slew_idx]; 383 } 384 385 di->vendor = id->driver_data; 386 } 387 388 di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config); 389 if (IS_ERR(di->regmap)) { 390 dev_err(&client->dev, "Failed to allocate regmap!\n"); 391 return PTR_ERR(di->regmap); 392 } 393 di->dev = &client->dev; 394 i2c_set_clientdata(client, di); 395 /* Get chip ID */ 396 ret = regmap_read(di->regmap, FAN53555_ID1, &val); 397 if (ret < 0) { 398 dev_err(&client->dev, "Failed to get chip ID!\n"); 399 return ret; 400 } 401 di->chip_id = val & DIE_ID; 402 /* Get chip revision */ 403 ret = regmap_read(di->regmap, FAN53555_ID2, &val); 404 if (ret < 0) { 405 dev_err(&client->dev, "Failed to get chip Rev!\n"); 406 return ret; 407 } 408 di->chip_rev = val & DIE_REV; 409 dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n", 410 di->chip_id, di->chip_rev); 411 /* Device init */ 412 ret = fan53555_device_setup(di, pdata); 413 if (ret < 0) { 414 dev_err(&client->dev, "Failed to setup device!\n"); 415 return ret; 416 } 417 /* Register regulator */ 418 config.dev = di->dev; 419 config.init_data = di->regulator; 420 config.regmap = di->regmap; 421 config.driver_data = di; 422 config.of_node = np; 423 424 ret = fan53555_regulator_register(di, &config); 425 if (ret < 0) 426 dev_err(&client->dev, "Failed to register regulator!\n"); 427 return ret; 428 429 } 430 431 static const struct i2c_device_id fan53555_id[] = { 432 { 433 .name = "fan53555", 434 .driver_data = FAN53555_VENDOR_FAIRCHILD 435 }, { 436 .name = "syr82x", 437 .driver_data = FAN53555_VENDOR_SILERGY 438 }, 439 { }, 440 }; 441 442 static struct i2c_driver fan53555_regulator_driver = { 443 .driver = { 444 .name = "fan53555-regulator", 445 .of_match_table = of_match_ptr(fan53555_dt_ids), 446 }, 447 .probe = fan53555_regulator_probe, 448 .id_table = fan53555_id, 449 }; 450 451 module_i2c_driver(fan53555_regulator_driver); 452 453 MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>"); 454 MODULE_DESCRIPTION("FAN53555 regulator driver"); 455 MODULE_LICENSE("GPL v2"); 456