xref: /linux/drivers/regulator/Kconfig (revision bb1c928df78ee6e3665a0d013e74108cc9abf34b)
1menuconfig REGULATOR
2	bool "Voltage and Current Regulator Support"
3	help
4	  Generic Voltage and Current Regulator support.
5
6	  This framework is designed to provide a generic interface to voltage
7	  and current regulators within the Linux kernel. It's intended to
8	  provide voltage and current control to client or consumer drivers and
9	  also provide status information to user space applications through a
10	  sysfs interface.
11
12	  The intention is to allow systems to dynamically control regulator
13	  output in order to save power and prolong battery life. This applies
14	  to both voltage regulators (where voltage output is controllable) and
15	  current sinks (where current output is controllable).
16
17	  This framework safely compiles out if not selected so that client
18	  drivers can still be used in systems with no software controllable
19	  regulators.
20
21	  If unsure, say no.
22
23
24if REGULATOR
25
26config REGULATOR_DEBUG
27	bool "Regulator debug support"
28	help
29	  Say yes here to enable debugging support.
30
31config REGULATOR_FIXED_VOLTAGE
32	tristate "Fixed voltage regulator support"
33	help
34	  This driver provides support for fixed voltage regulators,
35	  useful for systems which use a combination of software
36	  managed regulators and simple non-configurable regulators.
37
38config REGULATOR_VIRTUAL_CONSUMER
39	tristate "Virtual regulator consumer support"
40	help
41	  This driver provides a virtual consumer for the voltage and
42	  current regulator API which provides sysfs controls for
43	  configuring the supplies requested.  This is mainly useful
44	  for test purposes.
45
46	  If unsure, say no.
47
48config REGULATOR_USERSPACE_CONSUMER
49	tristate "Userspace regulator consumer support"
50	help
51	  There are some classes of devices that are controlled entirely
52	  from user space. Userspace consumer driver provides ability to
53	  control power supplies for such devices.
54
55	  If unsure, say no.
56
57config REGULATOR_88PM800
58	tristate "Marvell 88PM800 Power regulators"
59	depends on MFD_88PM800
60	help
61	  This driver supports Marvell 88PM800 voltage regulator chips.
62	  It delivers digitally programmable output,
63	  the voltage is programmed via I2C interface.
64	  It's suitable to support PXA988 chips to control VCC_MAIN and
65	  various voltages.
66
67config REGULATOR_88PM8607
68	tristate "Marvell 88PM8607 Power regulators"
69	depends on MFD_88PM860X=y
70	help
71	  This driver supports 88PM8607 voltage regulator chips.
72
73config REGULATOR_ACT8865
74	tristate "Active-semi act8865 voltage regulator"
75	depends on I2C
76	select REGMAP_I2C
77	help
78	  This driver controls a active-semi act8865 voltage output
79	  regulator via I2C bus.
80
81config REGULATOR_ACT8945A
82	tristate "Active-semi ACT8945A voltage regulator"
83	depends on MFD_ACT8945A
84	help
85	  This driver controls a active-semi ACT8945A voltage regulator
86	  via I2C bus. The ACT8945A features three step-down DC/DC converters
87	  and four low-dropout linear regulators, along with a ActivePath
88	  battery charger.
89
90config REGULATOR_AD5398
91	tristate "Analog Devices AD5398/AD5821 regulators"
92	depends on I2C
93	help
94	  This driver supports AD5398 and AD5821 current regulator chips.
95	  If building into module, its name is ad5398.ko.
96
97config REGULATOR_ANATOP
98	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
99	depends on MFD_SYSCON
100	help
101	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
102	  regulators. It is recommended that this option be
103	  enabled on i.MX6 platform.
104
105config REGULATOR_AAT2870
106	tristate "AnalogicTech AAT2870 Regulators"
107	depends on MFD_AAT2870_CORE
108	help
109	  If you have a AnalogicTech AAT2870 say Y to enable the
110	  regulator driver.
111
112config REGULATOR_AB3100
113	tristate "ST-Ericsson AB3100 Regulator functions"
114	depends on AB3100_CORE
115	default y if AB3100_CORE
116	help
117	 These regulators correspond to functionality in the
118	 AB3100 analog baseband dealing with power regulators
119	 for the system.
120
121config REGULATOR_AB8500
122	bool "ST-Ericsson AB8500 Power Regulators"
123	depends on AB8500_CORE
124	help
125	  This driver supports the regulators found on the ST-Ericsson mixed
126	  signal AB8500 PMIC
127
128config REGULATOR_ARIZONA_LDO1
129	tristate "Wolfson Arizona class devices LDO1"
130	depends on MFD_ARIZONA
131	depends on SND_SOC
132	help
133	  Support for the LDO1 regulators found on Wolfson Arizona class
134	  devices.
135
136config REGULATOR_ARIZONA_MICSUPP
137	tristate "Wolfson Arizona class devices MICSUPP"
138	depends on MFD_ARIZONA
139	depends on SND_SOC
140	help
141	  Support for the MICSUPP regulators found on Wolfson Arizona class
142	  devices.
143
144config REGULATOR_AS3711
145	tristate "AS3711 PMIC"
146	depends on MFD_AS3711
147	help
148	  This driver provides support for the voltage regulators on the
149	  AS3711 PMIC
150
151config REGULATOR_AS3722
152	tristate "AMS AS3722 PMIC Regulators"
153	depends on MFD_AS3722
154	help
155	  This driver provides support for the voltage regulators on the
156	  AS3722 PMIC. This will enable support for all the software
157	  controllable DCDC/LDO regulators.
158
159config REGULATOR_AXP20X
160	tristate "X-POWERS AXP20X PMIC Regulators"
161	depends on MFD_AXP20X
162	help
163	  This driver provides support for the voltage regulators on the
164	  AXP20X PMIC.
165
166config REGULATOR_BCM590XX
167	tristate "Broadcom BCM590xx PMU Regulators"
168	depends on MFD_BCM590XX
169	help
170	  This driver provides support for the voltage regulators on the
171	  BCM590xx PMUs. This will enable support for the software
172	  controllable LDO/Switching regulators.
173
174config REGULATOR_BD9571MWV
175	tristate "ROHM BD9571MWV Regulators"
176	depends on MFD_BD9571MWV
177	help
178	  This driver provides support for the voltage regulators on the
179	  ROHM BD9571MWV PMIC. This will enable support for the software
180	  controllable regulator and voltage sampling units.
181
182	  This driver can also be built as a module. If so, the module
183	  will be called bd9571mwv-regulator.
184
185config REGULATOR_CPCAP
186	tristate "Motorola CPCAP regulator"
187	depends on MFD_CPCAP
188	help
189	  Say y here for CPCAP regulator found on some Motorola phones
190	  and tablets such as Droid 4.
191
192config REGULATOR_DA903X
193	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
194	depends on PMIC_DA903X
195	help
196	  Say y here to support the BUCKs and LDOs regulators found on
197	  Dialog Semiconductor DA9030/DA9034 PMIC.
198
199config REGULATOR_DA9052
200	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
201	depends on PMIC_DA9052
202	help
203	  This driver supports the voltage regulators of DA9052-BC and
204	  DA9053-AA/Bx PMIC.
205
206config REGULATOR_DA9055
207	tristate "Dialog Semiconductor DA9055 regulators"
208	depends on MFD_DA9055
209	help
210	  Say y here to support the BUCKs and LDOs regulators found on
211	  Dialog Semiconductor DA9055 PMIC.
212
213	  This driver can also be built as a module. If so, the module
214	  will be called da9055-regulator.
215
216config REGULATOR_DA9062
217	tristate "Dialog Semiconductor DA9061/62 regulators"
218	depends on MFD_DA9062
219	help
220	  Say y here to support the BUCKs and LDOs regulators found on
221	  DA9061 and DA9062 PMICs.
222
223	  This driver can also be built as a module. If so, the module
224	  will be called da9062-regulator.
225
226config REGULATOR_DA9063
227	tristate "Dialog Semiconductor DA9063 regulators"
228	depends on MFD_DA9063
229	help
230	  Say y here to support the BUCKs and LDOs regulators found on
231	  DA9063 PMICs.
232
233	  This driver can also be built as a module. If so, the module
234	  will be called da9063-regulator.
235
236config REGULATOR_DA9210
237	tristate "Dialog Semiconductor DA9210 regulator"
238	depends on I2C
239	select REGMAP_I2C
240	help
241	  Say y here to support for the Dialog Semiconductor DA9210.
242	  The DA9210 is a multi-phase synchronous step down
243	  converter 12A DC-DC Buck controlled through an I2C
244	  interface.
245
246config REGULATOR_DA9211
247	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
248	depends on I2C
249	select REGMAP_I2C
250	help
251	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
252	  /DA9213/DA9214/DA9215.
253	  The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
254	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
255	  interface.
256
257config REGULATOR_DBX500_PRCMU
258	bool
259
260config REGULATOR_DB8500_PRCMU
261	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
262	depends on MFD_DB8500_PRCMU
263	select REGULATOR_DBX500_PRCMU
264	help
265	  This driver supports the voltage domain regulators controlled by the
266	  DB8500 PRCMU
267
268config REGULATOR_FAN53555
269	tristate "Fairchild FAN53555 Regulator"
270	depends on I2C
271	select REGMAP_I2C
272	help
273	  This driver supports Fairchild FAN53555 Digitally Programmable
274	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
275	  regulator that delivers a digitally programmable output from an
276	  input voltage supply of 2.5V to 5.5V. The output voltage is
277	  programmed through an I2C interface.
278
279config REGULATOR_GPIO
280	tristate "GPIO regulator support"
281	depends on GPIOLIB || COMPILE_TEST
282	help
283	  This driver provides support for regulators that can be
284	  controlled via gpios.
285	  It is capable of supporting current and voltage regulators
286	  and the platform has to provide a mapping of GPIO-states
287	  to target volts/amps.
288
289config REGULATOR_HI6421
290	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
291	depends on MFD_HI6421_PMIC && OF
292	help
293	  This driver provides support for the voltage regulators on the
294	  HiSilicon Hi6421 PMU / Codec IC.
295	  Hi6421 is a multi-function device which, on regulator part, provides
296	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
297	  of them come with support to either ECO (idle) or sleep mode.
298
299config REGULATOR_HI6421V530
300	tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
301	depends on MFD_HI6421_PMIC && OF
302	help
303	  This driver provides support for the voltage regulators on
304	  HiSilicon Hi6421v530 PMU / Codec IC.
305	  Hi6421v530 is a multi-function device which, on regulator part,
306	  provides 5 general purpose LDOs, and all of them come with support
307	  to either ECO (idle) or sleep mode.
308
309config REGULATOR_HI655X
310	tristate "Hisilicon HI655X PMIC regulators support"
311	depends on ARCH_HISI || COMPILE_TEST
312	depends on MFD_HI655X_PMIC && OF
313	help
314	  This driver provides support for the voltage regulators of the
315	  Hisilicon Hi655x PMIC device.
316
317config REGULATOR_ISL9305
318	tristate "Intersil ISL9305 regulator"
319	depends on I2C
320	select REGMAP_I2C
321	help
322	  This driver supports ISL9305 voltage regulator chip.
323
324config REGULATOR_ISL6271A
325	tristate "Intersil ISL6271A Power regulator"
326	depends on I2C
327	help
328	  This driver supports ISL6271A voltage regulator chip.
329
330config REGULATOR_LM363X
331	tristate "TI LM363X voltage regulators"
332	depends on MFD_TI_LMU
333	help
334	  This driver supports LM3631 and LM3632 voltage regulators for
335	  the LCD bias.
336	  One boost output voltage is configurable and always on.
337	  Other LDOs are used for the display module.
338
339config REGULATOR_LP3971
340	tristate "National Semiconductors LP3971 PMIC regulator driver"
341	depends on I2C
342	help
343	 Say Y here to support the voltage regulators and convertors
344	 on National Semiconductors LP3971 PMIC
345
346config REGULATOR_LP3972
347	tristate "National Semiconductors LP3972 PMIC regulator driver"
348	depends on I2C
349	help
350	 Say Y here to support the voltage regulators and convertors
351	 on National Semiconductors LP3972 PMIC
352
353config REGULATOR_LP872X
354	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
355	depends on I2C
356	select REGMAP_I2C
357	help
358	  This driver supports LP8720/LP8725 PMIC
359
360config REGULATOR_LP873X
361	tristate "TI LP873X Power regulators"
362	depends on MFD_TI_LP873X && OF
363	help
364	  This driver supports LP873X voltage regulator chips. LP873X
365	  provides two step-down converters and two general-purpose LDO
366	  voltage regulators. It supports software based voltage control
367	  for different voltage domains
368
369config REGULATOR_LP8755
370	tristate "TI LP8755 High Performance PMU driver"
371	depends on I2C
372	select REGMAP_I2C
373	help
374	  This driver supports LP8755 High Performance PMU driver. This
375	  chip contains six step-down DC/DC converters which can support
376	  9 mode multiphase configuration.
377
378config REGULATOR_LP87565
379	tristate "TI LP87565 Power regulators"
380	depends on MFD_TI_LP87565 && OF
381	help
382	  This driver supports LP87565 voltage regulator chips. LP87565
383	  provides four step-down converters. It supports software based
384	  voltage control for different voltage domains
385
386config REGULATOR_LP8788
387	tristate "TI LP8788 Power Regulators"
388	depends on MFD_LP8788
389	help
390	  This driver supports LP8788 voltage regulator chip.
391
392config REGULATOR_LTC3589
393	tristate "LTC3589 8-output voltage regulator"
394	depends on I2C
395	select REGMAP_I2C
396	help
397	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
398	  8-output regulators controlled via I2C.
399
400config REGULATOR_LTC3676
401	tristate "LTC3676 8-output voltage regulator"
402	depends on I2C
403	select REGMAP_I2C
404	help
405	  This enables support for the LTC3676
406	  8-output regulators controlled via I2C.
407
408config REGULATOR_MAX14577
409	tristate "Maxim 14577/77836 regulator"
410	depends on MFD_MAX14577
411	help
412	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
413	  The MAX14577 regulators include safeout LDO and charger current
414	  regulator. The MAX77836 has two additional LDOs.
415
416config REGULATOR_MAX1586
417	tristate "Maxim 1586/1587 voltage regulator"
418	depends on I2C
419	help
420	  This driver controls a Maxim 1586 or 1587 voltage output
421	  regulator via I2C bus. The provided regulator is suitable
422	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
423
424config REGULATOR_MAX77620
425	tristate "Maxim 77620/MAX20024 voltage regulator"
426	depends on MFD_MAX77620
427	help
428	  This driver controls Maxim MAX77620 voltage output regulator
429	  via I2C bus. The provided regulator is suitable for Tegra
430	  chip to control Step-Down DC-DC and LDOs. Say Y here to
431	  enable the regulator driver.
432
433config REGULATOR_MAX8649
434	tristate "Maxim 8649 voltage regulator"
435	depends on I2C
436	select REGMAP_I2C
437	help
438	  This driver controls a Maxim 8649 voltage output regulator via
439	  I2C bus.
440
441config REGULATOR_MAX8660
442	tristate "Maxim 8660/8661 voltage regulator"
443	depends on I2C
444	help
445	  This driver controls a Maxim 8660/8661 voltage output
446	  regulator via I2C bus.
447
448config REGULATOR_MAX8907
449	tristate "Maxim 8907 voltage regulator"
450	depends on MFD_MAX8907
451	help
452	  This driver controls a Maxim 8907 voltage output regulator
453	  via I2C bus. The provided regulator is suitable for Tegra
454	  chip to control Step-Down DC-DC and LDOs.
455
456config REGULATOR_MAX8925
457	tristate "Maxim MAX8925 Power Management IC"
458	depends on MFD_MAX8925
459	help
460	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
461
462config REGULATOR_MAX8952
463	tristate "Maxim MAX8952 Power Management IC"
464	depends on I2C
465	help
466	  This driver controls a Maxim 8952 voltage output regulator
467	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
468	  modes ranging from 0.77V to 1.40V by 0.01V steps.
469
470config REGULATOR_MAX8973
471	tristate "Maxim MAX8973 voltage regulator "
472	depends on I2C
473	depends on THERMAL && THERMAL_OF
474	select REGMAP_I2C
475	help
476	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
477	  switching regulator delievers up to 9A of output current. Each
478	  phase operates at a 2MHz fixed frequency with a 120 deg shift
479	  from the adjacent phase, allowing the use of small magnetic component.
480
481config REGULATOR_MAX8997
482	tristate "Maxim 8997/8966 regulator"
483	depends on MFD_MAX8997
484	help
485	  This driver controls a Maxim 8997/8966 regulator
486	  via I2C bus. The provided regulator is suitable for S5PC110,
487	  S5PV210, and Exynos-4 chips to control VCC_CORE and
488	  VCC_USIM voltages.
489
490config REGULATOR_MAX8998
491	tristate "Maxim 8998 voltage regulator"
492	depends on MFD_MAX8998
493	help
494	  This driver controls a Maxim 8998 voltage output regulator
495	  via I2C bus. The provided regulator is suitable for S3C6410
496	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
497
498config REGULATOR_MAX77686
499	tristate "Maxim 77686 regulator"
500	depends on MFD_MAX77686
501	help
502	  This driver controls a Maxim 77686 regulator
503	  via I2C bus. The provided regulator is suitable for
504	  Exynos-4 chips to control VARM and VINT voltages.
505
506config REGULATOR_MAX77693
507	tristate "Maxim 77693/77843 regulator"
508	depends on (MFD_MAX77693 || MFD_MAX77843)
509	help
510	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
511	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
512	  and one current regulator 'CHARGER'. This is suitable for
513	  Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
514
515config REGULATOR_MAX77802
516	tristate "Maxim 77802 regulator"
517	depends on MFD_MAX77686
518	help
519	  This driver controls a Maxim 77802 regulator
520	  via I2C bus. The provided regulator is suitable for
521	  Exynos5420/Exynos5800 SoCs to control various voltages.
522	  It includes support for control of voltage and ramp speed.
523
524config REGULATOR_MC13XXX_CORE
525	tristate
526
527config REGULATOR_MC13783
528	tristate "Freescale MC13783 regulator driver"
529	depends on MFD_MC13XXX
530	select REGULATOR_MC13XXX_CORE
531	help
532	  Say y here to support the regulators found on the Freescale MC13783
533	  PMIC.
534
535config REGULATOR_MC13892
536	tristate "Freescale MC13892 regulator driver"
537	depends on MFD_MC13XXX
538	select REGULATOR_MC13XXX_CORE
539	help
540	  Say y here to support the regulators found on the Freescale MC13892
541	  PMIC.
542
543config REGULATOR_MT6311
544	tristate "MediaTek MT6311 PMIC"
545	depends on I2C
546	select REGMAP_I2C
547	help
548	  Say y here to select this option to enable the power regulator of
549	  MediaTek MT6311 PMIC.
550	  This driver supports the control of different power rails of device
551	  through regulator interface.
552
553config REGULATOR_MT6323
554	tristate "MediaTek MT6323 PMIC"
555	depends on MFD_MT6397
556	help
557	  Say y here to select this option to enable the power regulator of
558	  MediaTek MT6323 PMIC.
559	  This driver supports the control of different power rails of device
560	  through regulator interface.
561
562config REGULATOR_MT6397
563	tristate "MediaTek MT6397 PMIC"
564	depends on MFD_MT6397
565	help
566	  Say y here to select this option to enable the power regulator of
567	  MediaTek MT6397 PMIC.
568	  This driver supports the control of different power rails of device
569	  through regulator interface.
570
571config REGULATOR_PALMAS
572	tristate "TI Palmas PMIC Regulators"
573	depends on MFD_PALMAS
574	help
575	  If you wish to control the regulators on the Palmas series of
576	  chips say Y here. This will enable support for all the software
577	  controllable SMPS/LDO regulators.
578
579	  The regulators available on Palmas series chips vary depending
580	  on the muxing. This is handled automatically in the driver by
581	  reading the mux info from OTP.
582
583config REGULATOR_PBIAS
584	tristate "PBIAS OMAP regulator driver"
585	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
586	help
587	 Say y here to support pbias regulator for mmc1:SD card i/o
588	 on OMAP SoCs.
589	 This driver provides support for OMAP pbias modelled
590	 regulators.
591
592config REGULATOR_PCAP
593	tristate "Motorola PCAP2 regulator driver"
594	depends on EZX_PCAP
595	help
596	 This driver provides support for the voltage regulators of the
597	 PCAP2 PMIC.
598
599config REGULATOR_PCF50633
600	tristate "NXP PCF50633 regulator driver"
601	depends on MFD_PCF50633
602	help
603	 Say Y here to support the voltage regulators and convertors
604	 on PCF50633
605
606config REGULATOR_PFUZE100
607	tristate "Freescale PFUZE100/200/3000 regulator driver"
608	depends on I2C
609	select REGMAP_I2C
610	help
611	  Say y here to support the regulators found on the Freescale
612	  PFUZE100/200/3000 PMIC.
613
614config REGULATOR_PV88060
615	tristate "Powerventure Semiconductor PV88060 regulator"
616	depends on I2C
617	select REGMAP_I2C
618	help
619	  Say y here to support the voltage regulators and convertors
620	  PV88060
621
622config REGULATOR_PV88080
623	tristate "Powerventure Semiconductor PV88080 regulator"
624	depends on I2C
625	select REGMAP_I2C
626	help
627	  Say y here to support the buck convertors on PV88080
628
629config REGULATOR_PV88090
630	tristate "Powerventure Semiconductor PV88090 regulator"
631	depends on I2C
632	select REGMAP_I2C
633	help
634	  Say y here to support the voltage regulators and convertors
635	  on PV88090
636
637config REGULATOR_PWM
638	tristate "PWM voltage regulator"
639	depends on PWM
640	help
641	  This driver supports PWM controlled voltage regulators. PWM
642	  duty cycle can increase or decrease the voltage.
643
644config REGULATOR_QCOM_RPM
645	tristate "Qualcomm RPM regulator driver"
646	depends on MFD_QCOM_RPM
647	help
648	  If you say yes to this option, support will be included for the
649	  regulators exposed by the Resource Power Manager found in Qualcomm
650	  8660, 8960 and 8064 based devices.
651
652	  Say M here if you want to include support for the regulators on the
653	  Qualcomm RPM as a module. The module will be named
654	  "qcom_rpm-regulator".
655
656config REGULATOR_QCOM_SMD_RPM
657	tristate "Qualcomm SMD based RPM regulator driver"
658	depends on QCOM_SMD_RPM
659	help
660	  If you say yes to this option, support will be included for the
661	  regulators exposed by the Resource Power Manager found in Qualcomm
662	  8974 based devices.
663
664	  Say M here if you want to include support for the regulators on the
665	  Qualcomm RPM as a module. The module will be named
666	  "qcom_smd-regulator".
667
668config REGULATOR_QCOM_SPMI
669	tristate "Qualcomm SPMI regulator driver"
670	depends on SPMI || COMPILE_TEST
671	help
672	  If you say yes to this option, support will be included for the
673	  regulators found in Qualcomm SPMI PMICs.
674
675	  Say M here if you want to include support for the regulators on the
676	  Qualcomm SPMI PMICs as a module. The module will be named
677	  "qcom_spmi-regulator".
678
679config REGULATOR_RC5T583
680	tristate "RICOH RC5T583 Power regulators"
681	depends on MFD_RC5T583
682	help
683	  Select this option to enable the power regulator of RICOH
684	  PMIC RC5T583.
685	  This driver supports the control of different power rails of device
686	  through regulator interface. The device supports multiple DCDC/LDO
687	  outputs which can be controlled by i2c communication.
688
689config REGULATOR_RK808
690	tristate "Rockchip RK808/RK818 Power regulators"
691	depends on MFD_RK808
692	help
693	  Select this option to enable the power regulator of ROCKCHIP
694	  PMIC RK808 and RK818.
695	  This driver supports the control of different power rails of device
696	  through regulator interface. The device supports multiple DCDC/LDO
697	  outputs which can be controlled by i2c communication.
698
699config REGULATOR_RN5T618
700	tristate "Ricoh RN5T567/618 voltage regulators"
701	depends on MFD_RN5T618
702	help
703	  Say y here to support the regulators found on Ricoh RN5T567 or
704	  RN5T618 PMIC.
705
706config REGULATOR_RT5033
707	tristate "Richtek RT5033 Regulators"
708	depends on MFD_RT5033
709	help
710	  This adds support for voltage and current regulators in Richtek
711	  RT5033 PMIC. The device supports multiple regulators like
712	  current source, LDO and Buck.
713
714config REGULATOR_S2MPA01
715	tristate "Samsung S2MPA01 voltage regulator"
716	depends on MFD_SEC_CORE
717	help
718	 This driver controls Samsung S2MPA01 voltage output regulator
719	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
720
721config REGULATOR_S2MPS11
722	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
723	depends on MFD_SEC_CORE
724	help
725	 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
726	 output regulator via I2C bus. The chip is comprised of high efficient
727	 Buck converters including Dual-Phase Buck converter, Buck-Boost
728	 converter, various LDOs.
729
730config REGULATOR_S5M8767
731	tristate "Samsung S5M8767A voltage regulator"
732	depends on MFD_SEC_CORE
733	help
734	 This driver supports a Samsung S5M8767A voltage output regulator
735	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
736	 supports DVS mode with 8bits of output voltage control.
737
738config REGULATOR_SKY81452
739	tristate "Skyworks Solutions SKY81452 voltage regulator"
740	depends on MFD_SKY81452
741	help
742	  This driver supports Skyworks SKY81452 voltage output regulator
743	  via I2C bus. SKY81452 has one voltage linear regulator can be
744	  programmed from 4.5V to 20V.
745
746	  This driver can also be built as a module. If so, the module
747	  will be called sky81452-regulator.
748
749config REGULATOR_TI_ABB
750	tristate "TI Adaptive Body Bias on-chip LDO"
751	depends on ARCH_OMAP
752	help
753	  Select this option to support Texas Instruments' on-chip Adaptive Body
754	  Bias (ABB) LDO regulators. It is recommended that this option be
755	  enabled on required TI SoC. Certain Operating Performance Points
756	  on TI SoCs may be unstable without enabling this as it provides
757	  device specific optimized bias to allow/optimize functionality.
758
759config REGULATOR_STW481X_VMMC
760	bool "ST Microelectronics STW481X VMMC regulator"
761	depends on MFD_STW481X || COMPILE_TEST
762	default y if MFD_STW481X
763	help
764	  This driver supports the internal VMMC regulator in the STw481x
765	  PMIC chips.
766
767config REGULATOR_TPS51632
768	tristate "TI TPS51632 Power Regulator"
769	depends on I2C
770	select REGMAP_I2C
771	help
772	  This driver supports TPS51632 voltage regulator chip.
773	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
774	  with Serial VID control and DVFS.
775	  The voltage output can be configure through I2C interface or PWM
776	  interface.
777
778config REGULATOR_TPS6105X
779	tristate "TI TPS6105X Power regulators"
780	depends on TPS6105X
781	default y if TPS6105X
782	help
783	  This driver supports TPS61050/TPS61052 voltage regulator chips.
784	  It is a single boost converter primarily for white LEDs and
785	  audio amplifiers.
786
787config REGULATOR_TPS62360
788	tristate "TI TPS6236x Power Regulator"
789	depends on I2C
790	select REGMAP_I2C
791	help
792	  This driver supports TPS6236x voltage regulator chip. This
793	  regulator is meant for processor core supply. This chip is
794	  high-frequency synchronous step down dc-dc converter optimized
795	  for battery-powered portable applications.
796
797config REGULATOR_TPS65023
798	tristate "TI TPS65023 Power regulators"
799	depends on I2C
800	select REGMAP_I2C
801	help
802	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
803	  three step-down converters and two general-purpose LDO voltage regulators.
804	  It supports TI's software based Class-2 SmartReflex implementation.
805
806config REGULATOR_TPS6507X
807	tristate "TI TPS6507X Power regulators"
808	depends on I2C
809	help
810	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
811	  three step-down converters and two general-purpose LDO voltage regulators.
812	  It supports TI's software based Class-2 SmartReflex implementation.
813
814config REGULATOR_TPS65086
815	tristate "TI TPS65086 Power regulators"
816	depends on MFD_TPS65086
817	help
818	  This driver provides support for the voltage regulators on
819	  TI TPS65086 PMICs.
820
821config REGULATOR_TPS65090
822	tristate "TI TPS65090 Power regulator"
823	depends on MFD_TPS65090
824	help
825	  This driver provides support for the voltage regulators on the
826	  TI TPS65090 PMIC.
827
828config REGULATOR_TPS65132
829	tristate "TI TPS65132 Dual Output Power regulators"
830	depends on I2C && GPIOLIB
831	select REGMAP_I2C
832	help
833	  This driver supports TPS65132 single inductor - dual output
834	  power supply specifcally designed for display panels.
835
836config REGULATOR_TPS65217
837	tristate "TI TPS65217 Power regulators"
838	depends on MFD_TPS65217
839	help
840	  This driver supports TPS65217 voltage regulator chips. TPS65217
841	  provides three step-down converters and four general-purpose LDO
842	  voltage regulators. It supports software based voltage control
843	  for different voltage domains
844
845config REGULATOR_TPS65218
846	tristate "TI TPS65218 Power regulators"
847	depends on MFD_TPS65218 && OF
848	help
849	  This driver supports TPS65218 voltage regulator chips. TPS65218
850	  provides six step-down converters and one general-purpose LDO
851	  voltage regulators. It supports software based voltage control
852	  for different voltage domains
853
854config REGULATOR_TPS6524X
855	tristate "TI TPS6524X Power regulators"
856	depends on SPI
857	help
858	  This driver supports TPS6524X voltage regulator chips. TPS6524X
859	  provides three step-down converters and two general-purpose LDO
860	  voltage regulators.  This device is interfaced using a customized
861	  serial interface currently supported on the sequencer serial
862	  port controller.
863
864config REGULATOR_TPS6586X
865	tristate "TI TPS6586X Power regulators"
866	depends on MFD_TPS6586X
867	help
868	  This driver supports TPS6586X voltage regulator chips.
869
870config REGULATOR_TPS65910
871	tristate "TI TPS65910/TPS65911 Power Regulators"
872	depends on MFD_TPS65910
873	help
874	  This driver supports TPS65910/TPS65911 voltage regulator chips.
875
876config REGULATOR_TPS65912
877	tristate "TI TPS65912 Power regulator"
878	depends on MFD_TPS65912
879	help
880	    This driver supports TPS65912 voltage regulator chip.
881
882config REGULATOR_TPS80031
883	tristate "TI TPS80031/TPS80032 power regulator driver"
884	depends on MFD_TPS80031
885	help
886	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
887	  Path and Battery Charger. It has 5 configurable step-down
888	  converters, 11 general purpose LDOs, VBUS generator and digital
889	  output to control regulators.
890
891config REGULATOR_TWL4030
892	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
893	depends on TWL4030_CORE
894	help
895	  This driver supports the voltage regulators provided by
896	  this family of companion chips.
897
898config REGULATOR_VCTRL
899	tristate "Voltage controlled regulators"
900	depends on OF
901	help
902	  This driver provides support for voltage regulators whose output
903	  voltage is controlled by the voltage of another regulator.
904
905config REGULATOR_VEXPRESS
906	tristate "Versatile Express regulators"
907	depends on VEXPRESS_CONFIG
908	help
909	  This driver provides support for voltage regulators available
910	  on the ARM Ltd's Versatile Express platform.
911
912config REGULATOR_WM831X
913	tristate "Wolfson Microelectronics WM831x PMIC regulators"
914	depends on MFD_WM831X
915	help
916	  Support the voltage and current regulators of the WM831x series
917	  of PMIC devices.
918
919config REGULATOR_WM8350
920	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
921	depends on MFD_WM8350
922	help
923	  This driver provides support for the voltage and current regulators
924	  of the WM8350 AudioPlus PMIC.
925
926config REGULATOR_WM8400
927	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
928	depends on MFD_WM8400
929	help
930	  This driver provides support for the voltage regulators of the
931	  WM8400 AudioPlus PMIC.
932
933config REGULATOR_WM8994
934	tristate "Wolfson Microelectronics WM8994 CODEC"
935	depends on MFD_WM8994
936	help
937	  This driver provides support for the voltage regulators on the
938	  WM8994 CODEC.
939
940endif
941
942