xref: /linux/drivers/regulator/Kconfig (revision b43ab901d671e3e3cad425ea5e9a3c74e266dcdd) 
1menuconfig REGULATOR
2	bool "Voltage and Current Regulator Support"
3	help
4	  Generic Voltage and Current Regulator support.
5
6	  This framework is designed to provide a generic interface to voltage
7	  and current regulators within the Linux kernel. It's intended to
8	  provide voltage and current control to client or consumer drivers and
9	  also provide status information to user space applications through a
10	  sysfs interface.
11
12	  The intention is to allow systems to dynamically control regulator
13	  output in order to save power and prolong battery life. This applies
14	  to both voltage regulators (where voltage output is controllable) and
15	  current sinks (where current output is controllable).
16
17	  This framework safely compiles out if not selected so that client
18	  drivers can still be used in systems with no software controllable
19	  regulators.
20
21	  If unsure, say no.
22
23if REGULATOR
24
25config REGULATOR_DEBUG
26	bool "Regulator debug support"
27	help
28	  Say yes here to enable debugging support.
29
30config REGULATOR_DUMMY
31	bool "Provide a dummy regulator if regulator lookups fail"
32	help
33	  If this option is enabled then when a regulator lookup fails
34	  and the board has not specified that it has provided full
35	  constraints then the regulator core will provide an always
36	  enabled dummy regulator will be provided, allowing consumer
37	  drivers to continue.
38
39	  A warning will be generated when this substitution is done.
40
41config REGULATOR_FIXED_VOLTAGE
42	tristate "Fixed voltage regulator support"
43	help
44	  This driver provides support for fixed voltage regulators,
45	  useful for systems which use a combination of software
46	  managed regulators and simple non-configurable regulators.
47
48config REGULATOR_VIRTUAL_CONSUMER
49	tristate "Virtual regulator consumer support"
50	help
51	  This driver provides a virtual consumer for the voltage and
52          current regulator API which provides sysfs controls for
53          configuring the supplies requested.  This is mainly useful
54          for test purposes.
55
56          If unsure, say no.
57
58config REGULATOR_USERSPACE_CONSUMER
59	tristate "Userspace regulator consumer support"
60	help
61	  There are some classes of devices that are controlled entirely
62	  from user space. Userspace consumer driver provides ability to
63	  control power supplies for such devices.
64
65          If unsure, say no.
66
67config REGULATOR_GPIO
68	tristate "GPIO regulator support"
69	depends on GENERIC_GPIO
70	help
71	  This driver provides support for regulators that can be
72	  controlled via gpios.
73	  It is capable of supporting current and voltage regulators
74	  and the platform has to provide a mapping of GPIO-states
75	  to target volts/amps.
76
77config REGULATOR_BQ24022
78	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
79	help
80	  This driver controls a TI bq24022 Charger attached via
81	  GPIOs. The provided current regulator can enable/disable
82	  charging select between 100 mA and 500 mA charging current
83	  limit.
84
85config REGULATOR_MAX1586
86	tristate "Maxim 1586/1587 voltage regulator"
87	depends on I2C
88	help
89	  This driver controls a Maxim 1586 or 1587 voltage output
90	  regulator via I2C bus. The provided regulator is suitable
91	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
92
93config REGULATOR_MAX8649
94	tristate "Maxim 8649 voltage regulator"
95	depends on I2C
96	select REGMAP_I2C
97	help
98	  This driver controls a Maxim 8649 voltage output regulator via
99	  I2C bus.
100
101config REGULATOR_MAX8660
102	tristate "Maxim 8660/8661 voltage regulator"
103	depends on I2C
104	help
105	  This driver controls a Maxim 8660/8661 voltage output
106	  regulator via I2C bus.
107
108config REGULATOR_MAX8925
109	tristate "Maxim MAX8925 Power Management IC"
110	depends on MFD_MAX8925
111	help
112	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
113
114config REGULATOR_MAX8952
115	tristate "Maxim MAX8952 Power Management IC"
116	depends on I2C
117	help
118	  This driver controls a Maxim 8952 voltage output regulator
119	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
120	  modes ranging from 0.77V to 1.40V by 0.01V steps.
121
122config REGULATOR_MAX8997
123	tristate "Maxim 8997/8966 regulator"
124	depends on MFD_MAX8997
125	help
126	  This driver controls a Maxim 8997/8966 regulator
127	  via I2C bus. The provided regulator is suitable for S5PC110,
128	  S5PV210, and Exynos-4 chips to control VCC_CORE and
129	  VCC_USIM voltages.
130
131config REGULATOR_MAX8998
132	tristate "Maxim 8998 voltage regulator"
133	depends on MFD_MAX8998
134	help
135	  This driver controls a Maxim 8998 voltage output regulator
136	  via I2C bus. The provided regulator is suitable for S3C6410
137	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
138
139config REGULATOR_TWL4030
140	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
141	depends on TWL4030_CORE
142	help
143	  This driver supports the voltage regulators provided by
144	  this family of companion chips.
145
146config REGULATOR_WM831X
147	tristate "Wolfson Microelcronics WM831x PMIC regulators"
148	depends on MFD_WM831X
149	help
150	  Support the voltage and current regulators of the WM831x series
151	  of PMIC devices.
152
153config REGULATOR_WM8350
154	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
155	depends on MFD_WM8350
156	help
157	  This driver provides support for the voltage and current regulators
158          of the WM8350 AudioPlus PMIC.
159
160config REGULATOR_WM8400
161	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
162	depends on MFD_WM8400
163	help
164	  This driver provides support for the voltage regulators of the
165	  WM8400 AudioPlus PMIC.
166
167config REGULATOR_WM8994
168	tristate "Wolfson Microelectronics WM8994 CODEC"
169	depends on MFD_WM8994
170	help
171	  This driver provides support for the voltage regulators on the
172	  WM8994 CODEC.
173
174config REGULATOR_DA903X
175	tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
176	depends on PMIC_DA903X
177	help
178	  Say y here to support the BUCKs and LDOs regulators found on
179	  Dialog Semiconductor DA9030/DA9034 PMIC.
180
181config REGULATOR_DA9052
182	tristate "Dialog DA9052/DA9053 regulators"
183	depends on PMIC_DA9052
184	help
185	  This driver supports the voltage regulators of DA9052-BC and
186	  DA9053-AA/Bx PMIC.
187
188config REGULATOR_PCF50633
189	tristate "PCF50633 regulator driver"
190        depends on MFD_PCF50633
191	help
192	 Say Y here to support the voltage regulators and convertors
193	 on PCF50633
194
195config REGULATOR_LP3971
196	tristate "National Semiconductors LP3971 PMIC regulator driver"
197	depends on I2C
198	help
199	 Say Y here to support the voltage regulators and convertors
200	 on National Semiconductors LP3971 PMIC
201
202config REGULATOR_LP3972
203	tristate "National Semiconductors LP3972 PMIC regulator driver"
204	depends on I2C
205	help
206	 Say Y here to support the voltage regulators and convertors
207	 on National Semiconductors LP3972 PMIC
208
209config REGULATOR_PCAP
210	tristate "PCAP2 regulator driver"
211	depends on EZX_PCAP
212	help
213	 This driver provides support for the voltage regulators of the
214	 PCAP2 PMIC.
215
216config REGULATOR_MC13XXX_CORE
217	tristate
218
219config REGULATOR_MC13783
220	tristate "Support regulators on Freescale MC13783 PMIC"
221	depends on MFD_MC13783
222	select REGULATOR_MC13XXX_CORE
223	help
224	  Say y here to support the regulators found on the Freescale MC13783
225	  PMIC.
226
227config REGULATOR_MC13892
228	tristate "Support regulators on Freescale MC13892 PMIC"
229	depends on MFD_MC13XXX
230	select REGULATOR_MC13XXX_CORE
231	help
232	  Say y here to support the regulators found on the Freescale MC13892
233	  PMIC.
234
235config REGULATOR_AB3100
236	tristate "ST-Ericsson AB3100 Regulator functions"
237	depends on AB3100_CORE
238	default y if AB3100_CORE
239	help
240	 These regulators correspond to functionality in the
241	 AB3100 analog baseband dealing with power regulators
242	 for the system.
243
244config REGULATOR_TPS6105X
245	tristate "TI TPS6105X Power regulators"
246	depends on TPS6105X
247	default y if TPS6105X
248	help
249	  This driver supports TPS61050/TPS61052 voltage regulator chips.
250	  It is a single boost converter primarily for white LEDs and
251	  audio amplifiers.
252
253config REGULATOR_TPS65023
254	tristate "TI TPS65023 Power regulators"
255	depends on I2C
256	select REGMAP_I2C
257	help
258	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
259	  three step-down converters and two general-purpose LDO voltage regulators.
260	  It supports TI's software based Class-2 SmartReflex implementation.
261
262config REGULATOR_TPS6507X
263	tristate "TI TPS6507X Power regulators"
264	depends on I2C
265	help
266	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
267	  three step-down converters and two general-purpose LDO voltage regulators.
268	  It supports TI's software based Class-2 SmartReflex implementation.
269
270config REGULATOR_TPS65912
271	tristate "TI TPS65912 Power regulator"
272	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
273	help
274	    This driver supports TPS65912 voltage regulator chip.
275
276config REGULATOR_88PM8607
277	bool "Marvell 88PM8607 Power regulators"
278	depends on MFD_88PM860X=y
279	help
280	  This driver supports 88PM8607 voltage regulator chips.
281
282config REGULATOR_ISL6271A
283	tristate "Intersil ISL6271A Power regulator"
284	depends on I2C
285	help
286	  This driver supports ISL6271A voltage regulator chip.
287
288config REGULATOR_AD5398
289	tristate "Analog Devices AD5398/AD5821 regulators"
290	depends on I2C
291	help
292	  This driver supports AD5398 and AD5821 current regulator chips.
293	  If building into module, its name is ad5398.ko.
294
295config REGULATOR_AB8500
296	bool "ST-Ericsson AB8500 Power Regulators"
297	depends on AB8500_CORE
298	help
299	  This driver supports the regulators found on the ST-Ericsson mixed
300	  signal AB8500 PMIC
301
302config REGULATOR_DB8500_PRCMU
303	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
304	depends on MFD_DB8500_PRCMU
305	help
306	  This driver supports the voltage domain regulators controlled by the
307	  DB8500 PRCMU
308
309config REGULATOR_TPS6586X
310	tristate "TI TPS6586X Power regulators"
311	depends on MFD_TPS6586X
312	help
313	  This driver supports TPS6586X voltage regulator chips.
314
315config REGULATOR_TPS6524X
316	tristate "TI TPS6524X Power regulators"
317	depends on SPI
318	help
319	  This driver supports TPS6524X voltage regulator chips. TPS6524X
320	  provides three step-down converters and two general-purpose LDO
321	  voltage regulators.  This device is interfaced using a customized
322	  serial interface currently supported on the sequencer serial
323	  port controller.
324
325config REGULATOR_TPS65910
326	tristate "TI TPS65910 Power Regulator"
327	depends on MFD_TPS65910
328	help
329	  This driver supports TPS65910 voltage regulator chips.
330
331config REGULATOR_AAT2870
332	tristate "AnalogicTech AAT2870 Regulators"
333	depends on MFD_AAT2870_CORE
334	help
335	  If you have a AnalogicTech AAT2870 say Y to enable the
336	  regulator driver.
337
338endif
339
340