1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig REGULATOR 3 bool "Voltage and Current Regulator Support" 4 select LINEAR_RANGES 5 help 6 Generic Voltage and Current Regulator support. 7 8 This framework is designed to provide a generic interface to voltage 9 and current regulators within the Linux kernel. It's intended to 10 provide voltage and current control to client or consumer drivers and 11 also provide status information to user space applications through a 12 sysfs interface. 13 14 The intention is to allow systems to dynamically control regulator 15 output in order to save power and prolong battery life. This applies 16 to both voltage regulators (where voltage output is controllable) and 17 current sinks (where current output is controllable). 18 19 This framework safely compiles out if not selected so that client 20 drivers can still be used in systems with no software controllable 21 regulators. 22 23 If unsure, say no. 24 25 26if REGULATOR 27 28config REGULATOR_DEBUG 29 bool "Regulator debug support" 30 help 31 Say yes here to enable debugging support. 32 33config REGULATOR_FIXED_VOLTAGE 34 tristate "Fixed voltage regulator support" 35 help 36 This driver provides support for fixed voltage regulators, 37 useful for systems which use a combination of software 38 managed regulators and simple non-configurable regulators. 39 40config REGULATOR_VIRTUAL_CONSUMER 41 tristate "Virtual regulator consumer support" 42 help 43 This driver provides a virtual consumer for the voltage and 44 current regulator API which provides sysfs controls for 45 configuring the supplies requested. This is mainly useful 46 for test purposes. 47 48 If unsure, say no. 49 50config REGULATOR_USERSPACE_CONSUMER 51 tristate "Userspace regulator consumer support" 52 help 53 There are some classes of devices that are controlled entirely 54 from user space. Userspace consumer driver provides ability to 55 control power supplies for such devices. 56 57 If unsure, say no. 58 59config REGULATOR_NETLINK_EVENTS 60 bool "Enable support for receiving regulator events via netlink" 61 depends on NET 62 help 63 Enabling this option allows the kernel to broadcast regulator events using 64 the netlink mechanism. User-space applications can subscribe to these events 65 for real-time updates on various regulator events. 66 67 If unsure, say no. 68 69config REGULATOR_88PG86X 70 tristate "Marvell 88PG86X voltage regulators" 71 depends on I2C 72 select REGMAP_I2C 73 help 74 This driver supports Marvell 88PG867 and 88PG868 voltage regulators. 75 They provide two I2C-controlled DC/DC step-down converters with 76 sleep mode and separate enable pins. 77 78config REGULATOR_88PM800 79 tristate "Marvell 88PM800 Power regulators" 80 depends on MFD_88PM800 81 help 82 This driver supports Marvell 88PM800 voltage regulator chips. 83 It delivers digitally programmable output, 84 the voltage is programmed via I2C interface. 85 It's suitable to support PXA988 chips to control VCC_MAIN and 86 various voltages. 87 88config REGULATOR_88PM8607 89 tristate "Marvell 88PM8607 Power regulators" 90 depends on MFD_88PM860X=y 91 help 92 This driver supports 88PM8607 voltage regulator chips. 93 94config REGULATOR_88PM886 95 tristate "Marvell 88PM886 voltage regulators" 96 depends on MFD_88PM886_PMIC 97 help 98 This driver implements support for Marvell 88PM886 voltage regulators. 99 100config REGULATOR_ACT8865 101 tristate "Active-semi act8865 voltage regulator" 102 depends on I2C 103 depends on POWER_SUPPLY 104 select REGMAP_I2C 105 help 106 This driver controls a active-semi act8865 voltage output 107 regulator via I2C bus. 108 109config REGULATOR_ACT8945A 110 tristate "Active-semi ACT8945A voltage regulator" 111 depends on MFD_ACT8945A 112 help 113 This driver controls a active-semi ACT8945A voltage regulator 114 via I2C bus. The ACT8945A features three step-down DC/DC converters 115 and four low-dropout linear regulators, along with a ActivePath 116 battery charger. 117 118config REGULATOR_AD5398 119 tristate "Analog Devices AD5398/AD5821 regulators" 120 depends on I2C 121 help 122 This driver supports AD5398 and AD5821 current regulator chips. 123 If building into module, its name is ad5398.ko. 124 125config REGULATOR_ANATOP 126 tristate "Freescale i.MX on-chip ANATOP LDO regulators" 127 depends on ARCH_MXC || COMPILE_TEST 128 depends on MFD_SYSCON 129 help 130 Say y here to support Freescale i.MX on-chip ANATOP LDOs 131 regulators. It is recommended that this option be 132 enabled on i.MX6 platform. 133 134config REGULATOR_AAT2870 135 tristate "AnalogicTech AAT2870 Regulators" 136 depends on MFD_AAT2870_CORE 137 help 138 If you have a AnalogicTech AAT2870 say Y to enable the 139 regulator driver. 140 141config REGULATOR_AB8500 142 bool "ST-Ericsson AB8500 Power Regulators" 143 depends on AB8500_CORE 144 help 145 This driver supports the regulators found on the ST-Ericsson mixed 146 signal AB8500 PMIC 147 148config REGULATOR_ARIZONA_LDO1 149 tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" 150 depends on MFD_ARIZONA || MFD_MADERA 151 depends on SND_SOC 152 help 153 Support for the LDO1 regulators found on Cirrus Logic Madera codecs 154 and Wolfson Microelectronic Arizona codecs. 155 156config REGULATOR_ARIZONA_MICSUPP 157 tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" 158 depends on MFD_ARIZONA || MFD_MADERA 159 depends on SND_SOC 160 help 161 Support for the MICSUPP regulators found on Cirrus Logic Madera codecs 162 and Wolfson Microelectronic Arizona codecs 163 devices. 164 165config REGULATOR_ARM_SCMI 166 tristate "SCMI based regulator driver" 167 depends on ARM_SCMI_PROTOCOL && OF 168 help 169 This adds the regulator driver support for ARM platforms using SCMI 170 protocol for device voltage management. 171 This driver uses SCMI Message Protocol driver to interact with the 172 firmware providing the device Voltage functionality. 173 174config REGULATOR_AS3711 175 tristate "AS3711 PMIC" 176 depends on MFD_AS3711 177 help 178 This driver provides support for the voltage regulators on the 179 AS3711 PMIC 180 181config REGULATOR_AS3722 182 tristate "AMS AS3722 PMIC Regulators" 183 depends on MFD_AS3722 184 help 185 This driver provides support for the voltage regulators on the 186 AS3722 PMIC. This will enable support for all the software 187 controllable DCDC/LDO regulators. 188 189config REGULATOR_ATC260X 190 tristate "Actions Semi ATC260x PMIC Regulators" 191 depends on MFD_ATC260X 192 help 193 This driver provides support for the voltage regulators on the 194 ATC260x PMICs. This will enable support for all the software 195 controllable DCDC/LDO regulators. 196 197config REGULATOR_AW37503 198 tristate "Awinic AW37503 Dual Output Power regulators" 199 depends on I2C && GPIOLIB 200 select REGMAP_I2C 201 help 202 This driver supports AW37503 single inductor - dual output 203 power supply specifically designed for display panels. 204 205config REGULATOR_AXP20X 206 tristate "X-POWERS AXP20X PMIC Regulators" 207 depends on MFD_AXP20X 208 help 209 This driver provides support for the voltage regulators on the 210 AXP20X PMIC. 211 212config REGULATOR_BCM590XX 213 tristate "Broadcom BCM590xx PMU Regulators" 214 depends on MFD_BCM590XX 215 help 216 This driver provides support for the voltage regulators on the 217 BCM590xx PMUs. This will enable support for the software 218 controllable LDO/Switching regulators. 219 220config REGULATOR_BD71815 221 tristate "ROHM BD71815 Power Regulator" 222 depends on MFD_ROHM_BD71828 223 select REGULATOR_ROHM 224 help 225 This driver supports voltage regulators on ROHM BD71815 PMIC. 226 This will enable support for the software controllable buck 227 and LDO regulators and a current regulator for LEDs. 228 229 This driver can also be built as a module. If so, the module 230 will be called bd71815-regulator. 231 232config REGULATOR_BD71828 233 tristate "ROHM BD71828 Power Regulator" 234 depends on MFD_ROHM_BD71828 235 select REGULATOR_ROHM 236 help 237 This driver supports voltage regulators on ROHM BD71828 PMIC. 238 This will enable support for the software controllable buck 239 and LDO regulators. 240 241 This driver can also be built as a module. If so, the module 242 will be called bd71828-regulator. 243 244config REGULATOR_BD718XX 245 tristate "ROHM BD71837 Power Regulator" 246 depends on MFD_ROHM_BD718XX 247 select REGULATOR_ROHM 248 help 249 This driver supports voltage regulators on ROHM BD71837 PMIC. 250 This will enable support for the software controllable buck 251 and LDO regulators. 252 253 This driver can also be built as a module. If so, the module 254 will be called bd718x7-regulator. 255 256config REGULATOR_BD9571MWV 257 tristate "ROHM BD9571MWV Regulators" 258 depends on MFD_BD9571MWV 259 help 260 This driver provides support for the voltage regulators on the 261 ROHM BD9571MWV PMIC. This will enable support for the software 262 controllable regulator and voltage sampling units. 263 264 This driver can also be built as a module. If so, the module 265 will be called bd9571mwv-regulator. 266 267config REGULATOR_BD957XMUF 268 tristate "ROHM BD9576MUF and BD9573MUF Regulators" 269 depends on MFD_ROHM_BD957XMUF 270 help 271 This driver supports voltage regulators on ROHM BD9576MUF and 272 BD9573MUF PMICs. 273 274 This driver can also be built as a module. If so, the module 275 will be called bd9576-regulator. 276 277config REGULATOR_BD96801 278 tristate "ROHM BD96801 Power Regulator" 279 depends on MFD_ROHM_BD96801 280 select REGULATOR_ROHM 281 help 282 This driver supports voltage regulators on ROHM BD96801 PMIC. 283 This will enable support for the software controllable buck 284 and LDO regulators. 285 286 This driver can also be built as a module. If so, the module 287 will be called bd96801-regulator. 288 289config REGULATOR_CPCAP 290 tristate "Motorola CPCAP regulator" 291 depends on MFD_CPCAP 292 help 293 Say y here for CPCAP regulator found on some Motorola phones 294 and tablets such as Droid 4. 295 296config REGULATOR_CROS_EC 297 tristate "ChromeOS EC regulators" 298 depends on CROS_EC && OF 299 help 300 This driver supports voltage regulators that is connected to ChromeOS 301 EC and controlled through EC host commands. 302 303 This driver can also be built as a module. If so, the module 304 will be called cros-ec-regulator. 305 306config REGULATOR_DA903X 307 tristate "Dialog Semiconductor DA9030/DA9034 regulators" 308 depends on PMIC_DA903X 309 depends on !CC_IS_CLANG # https://llvm.org/pr38789 310 help 311 Say y here to support the BUCKs and LDOs regulators found on 312 Dialog Semiconductor DA9030/DA9034 PMIC. 313 314config REGULATOR_DA9052 315 tristate "Dialog Semiconductor DA9052/DA9053 regulators" 316 depends on PMIC_DA9052 317 help 318 This driver supports the voltage regulators of DA9052-BC and 319 DA9053-AA/Bx PMIC. 320 321config REGULATOR_DA9055 322 tristate "Dialog Semiconductor DA9055 regulators" 323 depends on MFD_DA9055 324 help 325 Say y here to support the BUCKs and LDOs regulators found on 326 Dialog Semiconductor DA9055 PMIC. 327 328 This driver can also be built as a module. If so, the module 329 will be called da9055-regulator. 330 331config REGULATOR_DA9062 332 tristate "Dialog Semiconductor DA9061/62 regulators" 333 depends on MFD_DA9062 334 help 335 Say y here to support the BUCKs and LDOs regulators found on 336 DA9061 and DA9062 PMICs. 337 338 This driver can also be built as a module. If so, the module 339 will be called da9062-regulator. 340 341config REGULATOR_DA9063 342 tristate "Dialog Semiconductor DA9063 regulators" 343 depends on MFD_DA9063 && OF 344 help 345 Say y here to support the BUCKs and LDOs regulators found on 346 DA9063 PMICs. 347 348 This driver can also be built as a module. If so, the module 349 will be called da9063-regulator. 350 351config REGULATOR_DA9121 352 tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator" 353 depends on I2C && OF 354 select REGMAP_I2C 355 help 356 Say y here to support for the Dialog Semiconductor DA9121. The 357 DA9121 is a single channel dual-phase buck converter controlled 358 through an I2C interface. 359 360 DA9121 Single-channel dual-phase 10A buck converter 361 DA9130 Single-channel dual-phase 10A buck converter (Automotive) 362 DA9217 Single-channel dual-phase 6A buck converter 363 DA9122 Dual-channel single-phase 5A buck converter 364 DA9131 Dual-channel single-phase 5A buck converter (Automotive) 365 DA9220 Dual-channel single-phase 3A buck converter 366 DA9132 Dual-channel single-phase 3A buck converter (Automotive) 367 368 This driver can also be built as a module. If so, the module 369 will be called da9121-regulator. 370 371config REGULATOR_DA9210 372 tristate "Dialog Semiconductor DA9210 regulator" 373 depends on I2C 374 select REGMAP_I2C 375 help 376 Say y here to support for the Dialog Semiconductor DA9210. 377 The DA9210 is a multi-phase synchronous step down 378 converter 12A DC-DC Buck controlled through an I2C 379 interface. 380 381config REGULATOR_DA9211 382 tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator" 383 depends on I2C 384 select REGMAP_I2C 385 help 386 Say y here to support for the Dialog Semiconductor DA9211/DA9212 387 /DA9213/DA9214/DA9215. 388 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous 389 step down converter 12A or 16A DC-DC Buck controlled through an I2C 390 interface. 391 392config REGULATOR_DBX500_PRCMU 393 bool 394 395config REGULATOR_DB8500_PRCMU 396 bool "ST-Ericsson DB8500 Voltage Domain Regulators" 397 depends on MFD_DB8500_PRCMU 398 select REGULATOR_DBX500_PRCMU 399 help 400 This driver supports the voltage domain regulators controlled by the 401 DB8500 PRCMU 402 403config REGULATOR_FAN53555 404 tristate "Fairchild FAN53555 Regulator" 405 depends on I2C 406 select REGMAP_I2C 407 help 408 This driver supports Fairchild FAN53555 Digitally Programmable 409 TinyBuck Regulator. The FAN53555 is a step-down switching voltage 410 regulator that delivers a digitally programmable output from an 411 input voltage supply of 2.5V to 5.5V. The output voltage is 412 programmed through an I2C interface. 413 414config REGULATOR_FAN53880 415 tristate "Fairchild FAN53880 Regulator" 416 depends on I2C && OF 417 select REGMAP_I2C 418 help 419 This driver supports Fairchild (ON Semiconductor) FAN53880 420 regulator. The regulator is a programmable power management IC 421 (PMIC), it is controlled by I2C and provides one BUCK, one BOOST 422 and four LDO outputs. 423 424config REGULATOR_GPIO 425 tristate "GPIO regulator support" 426 depends on GPIOLIB || COMPILE_TEST 427 help 428 This driver provides support for regulators that can be 429 controlled via gpios. 430 It is capable of supporting current and voltage regulators 431 and the platform has to provide a mapping of GPIO-states 432 to target volts/amps. 433 434config REGULATOR_HI6421 435 tristate "HiSilicon Hi6421 PMIC voltage regulator support" 436 depends on MFD_HI6421_PMIC && OF 437 help 438 This driver provides support for the voltage regulators on the 439 HiSilicon Hi6421 PMU / Codec IC. 440 Hi6421 is a multi-function device which, on regulator part, provides 441 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All 442 of them come with support to either ECO (idle) or sleep mode. 443 444config REGULATOR_HI6421V530 445 tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" 446 depends on MFD_HI6421_PMIC && OF 447 help 448 This driver provides support for the voltage regulators on 449 HiSilicon Hi6421v530 PMU / Codec IC. 450 Hi6421v530 is a multi-function device which, on regulator part, 451 provides 5 general purpose LDOs, and all of them come with support 452 to either ECO (idle) or sleep mode. 453 454config REGULATOR_HI655X 455 tristate "Hisilicon HI655X PMIC regulators support" 456 depends on ARCH_HISI || COMPILE_TEST 457 depends on MFD_HI655X_PMIC && OF 458 help 459 This driver provides support for the voltage regulators of the 460 Hisilicon Hi655x PMIC device. 461 462config REGULATOR_HI6421V600 463 tristate "HiSilicon Hi6421v600 PMIC voltage regulator support" 464 depends on MFD_HI6421_SPMI && OF 465 select REGMAP 466 help 467 This driver provides support for the voltage regulators on 468 HiSilicon Hi6421v600 PMU / Codec IC. 469 This is used on Kirin 3670 boards, like HiKey 970. 470 471config REGULATOR_ISL9305 472 tristate "Intersil ISL9305 regulator" 473 depends on I2C 474 select REGMAP_I2C 475 help 476 This driver supports ISL9305 voltage regulator chip. 477 478config REGULATOR_ISL6271A 479 tristate "Intersil ISL6271A Power regulator" 480 depends on I2C 481 help 482 This driver supports ISL6271A voltage regulator chip. 483 484config REGULATOR_LM363X 485 tristate "TI LM363X voltage regulators" 486 depends on MFD_TI_LMU 487 help 488 This driver supports LM3631, LM3632 and LM36274 voltage regulators for 489 the LCD bias. 490 One boost output voltage is configurable and always on. 491 Other LDOs are used for the display module. 492 493config REGULATOR_LOCHNAGAR 494 tristate "Cirrus Logic Lochnagar regulator driver" 495 depends on MFD_LOCHNAGAR 496 help 497 This enables regulator support on the Cirrus Logic Lochnagar audio 498 development board. 499 500config REGULATOR_LP3971 501 tristate "National Semiconductors LP3971 PMIC regulator driver" 502 depends on I2C 503 help 504 Say Y here to support the voltage regulators and convertors 505 on National Semiconductors LP3971 PMIC 506 507config REGULATOR_LP3972 508 tristate "National Semiconductors LP3972 PMIC regulator driver" 509 depends on I2C 510 help 511 Say Y here to support the voltage regulators and convertors 512 on National Semiconductors LP3972 PMIC 513 514config REGULATOR_LP872X 515 tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" 516 depends on I2C 517 select REGMAP_I2C 518 help 519 This driver supports LP8720/LP8725 PMIC 520 521config REGULATOR_LP873X 522 tristate "TI LP873X Power regulators" 523 depends on MFD_TI_LP873X && OF 524 help 525 This driver supports LP873X voltage regulator chips. LP873X 526 provides two step-down converters and two general-purpose LDO 527 voltage regulators. It supports software based voltage control 528 for different voltage domains 529 530config REGULATOR_LP8755 531 tristate "TI LP8755 High Performance PMU driver" 532 depends on I2C 533 select REGMAP_I2C 534 help 535 This driver supports LP8755 High Performance PMU driver. This 536 chip contains six step-down DC/DC converters which can support 537 9 mode multiphase configuration. 538 539config REGULATOR_LP87565 540 tristate "TI LP87565 Power regulators" 541 depends on MFD_TI_LP87565 && OF 542 help 543 This driver supports LP87565 voltage regulator chips. LP87565 544 provides four step-down converters. It supports software based 545 voltage control for different voltage domains 546 547config REGULATOR_LP8788 548 tristate "TI LP8788 Power Regulators" 549 depends on MFD_LP8788 550 help 551 This driver supports LP8788 voltage regulator chip. 552 553config REGULATOR_LTC3589 554 tristate "LTC3589 8-output voltage regulator" 555 depends on I2C 556 select REGMAP_I2C 557 help 558 This enables support for the LTC3589, LTC3589-1, and LTC3589-2 559 8-output regulators controlled via I2C. 560 561config REGULATOR_LTC3676 562 tristate "LTC3676 8-output voltage regulator" 563 depends on I2C 564 select REGMAP_I2C 565 help 566 This enables support for the LTC3676 567 8-output regulators controlled via I2C. 568 569config REGULATOR_MAX14577 570 tristate "Maxim 14577/77836 regulator" 571 depends on MFD_MAX14577 572 help 573 This driver controls a Maxim MAX14577/77836 regulator via I2C bus. 574 The MAX14577 regulators include safeout LDO and charger current 575 regulator. The MAX77836 has two additional LDOs. 576 577config REGULATOR_MAX1586 578 tristate "Maxim 1586/1587 voltage regulator" 579 depends on I2C 580 help 581 This driver controls a Maxim 1586 or 1587 voltage output 582 regulator via I2C bus. The provided regulator is suitable 583 for PXA27x chips to control VCC_CORE and VCC_USIM voltages. 584 585config REGULATOR_MAX5970 586 tristate "Maxim 5970/5978 power switch and monitor" 587 depends on I2C 588 depends on OF 589 depends on MFD_MAX5970 590 help 591 This driver controls a Maxim 5970/5978 switch via I2C bus. 592 The MAX5970/5978 is a smart switch with no output regulation, but 593 fault protection and voltage and current monitoring capabilities. 594 595config REGULATOR_MAX77503 596 tristate "Analog Devices MAX77503 Regulator" 597 depends on I2C 598 select REGMAP_I2C 599 help 600 This driver controls a Analog Devices MAX77503 14V input, 1.5A 601 high-efficiency buck converter via I2C bus. 602 Say M here if you want to include support for the regulator as a 603 module. 604 605config REGULATOR_MAX77541 606 tristate "Analog Devices MAX77541/77540 Regulator" 607 depends on MFD_MAX77541 608 help 609 This driver controls a Analog Devices MAX77541/77540 regulators 610 via I2C bus. Both MAX77540 and MAX77541 are dual-phase 611 high-efficiency buck converter. Say Y here to 612 enable the regulator driver. 613 Say M here if you want to include support for the regulator as a 614 module. 615 616config REGULATOR_MAX77620 617 tristate "Maxim 77620/MAX20024 voltage regulator" 618 depends on MFD_MAX77620 || COMPILE_TEST 619 help 620 This driver controls Maxim MAX77620 voltage output regulator 621 via I2C bus. The provided regulator is suitable for Tegra 622 chip to control Step-Down DC-DC and LDOs. Say Y here to 623 enable the regulator driver. 624 625config REGULATOR_MAX77650 626 tristate "Maxim MAX77650/77651 regulator support" 627 depends on MFD_MAX77650 || COMPILE_TEST 628 help 629 Regulator driver for MAX77650/77651 PMIC from Maxim 630 Semiconductor. This device has a SIMO with three independent 631 power rails and an LDO. 632 633config REGULATOR_MAX77857 634 tristate "ADI MAX77857/MAX77831 regulator support" 635 depends on I2C 636 select REGMAP_I2C 637 help 638 This driver controls a ADI MAX77857 and MAX77831 regulators. 639 via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost 640 converters with input voltage range (2.5V to 16V). Say Y here to 641 enable the regulator driver 642 643config REGULATOR_MAX8649 644 tristate "Maxim 8649 voltage regulator" 645 depends on I2C 646 select REGMAP_I2C 647 help 648 This driver controls a Maxim 8649 voltage output regulator via 649 I2C bus. 650 651config REGULATOR_MAX8660 652 tristate "Maxim 8660/8661 voltage regulator" 653 depends on I2C 654 help 655 This driver controls a Maxim 8660/8661 voltage output 656 regulator via I2C bus. 657 658config REGULATOR_MAX8893 659 tristate "Maxim 8893 voltage regulator" 660 depends on I2C 661 select REGMAP_I2C 662 help 663 This driver controls a Maxim 8893 voltage output 664 regulator via I2C bus. 665 666config REGULATOR_MAX8907 667 tristate "Maxim 8907 voltage regulator" 668 depends on MFD_MAX8907 || COMPILE_TEST 669 help 670 This driver controls a Maxim 8907 voltage output regulator 671 via I2C bus. The provided regulator is suitable for Tegra 672 chip to control Step-Down DC-DC and LDOs. 673 674config REGULATOR_MAX8925 675 tristate "Maxim MAX8925 Power Management IC" 676 depends on MFD_MAX8925 677 help 678 Say y here to support the voltage regulator of Maxim MAX8925 PMIC. 679 680config REGULATOR_MAX8952 681 tristate "Maxim MAX8952 Power Management IC" 682 depends on I2C 683 help 684 This driver controls a Maxim 8952 voltage output regulator 685 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS 686 modes ranging from 0.77V to 1.40V by 0.01V steps. 687 688config REGULATOR_MAX8973 689 tristate "Maxim MAX8973A voltage regulator" 690 depends on I2C 691 depends on THERMAL && THERMAL_OF 692 select REGMAP_I2C 693 help 694 The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down 695 switching regulator delivers up to 9A of output current. Each 696 phase operates at a 2MHz fixed frequency with a 120 deg shift 697 from the adjacent phase, allowing the use of small magnetic component. 698 699config REGULATOR_MAX8997 700 tristate "Maxim 8997/8966 regulator" 701 depends on MFD_MAX8997 702 help 703 This driver controls a Maxim 8997/8966 regulator 704 via I2C bus. The provided regulator is suitable for S5PC110, 705 S5PV210, and Exynos-4 chips to control VCC_CORE and 706 VCC_USIM voltages. 707 708config REGULATOR_MAX8998 709 tristate "Maxim 8998 voltage regulator" 710 depends on MFD_MAX8998 711 help 712 This driver controls a Maxim 8998 voltage output regulator 713 via I2C bus. The provided regulator is suitable for S3C6410 714 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. 715 716config REGULATOR_MAX20086 717 tristate "Maxim MAX20086-MAX20089 Camera Power Protectors" 718 depends on I2C 719 select REGMAP_I2C 720 help 721 This driver controls a Maxim MAX20086-MAX20089 camera power 722 protectorvia I2C bus. The regulator has 2 or 4 outputs depending on 723 the device model. This driver is only capable to turn on/off them. 724 725config REGULATOR_MAX20411 726 tristate "Maxim MAX20411 High-Efficiency Single Step-Down Converter" 727 depends on I2C 728 select REGMAP_I2C 729 help 730 This driver controls the Maxim MAX20411 family of high-efficiency, 731 syncrhonous step-down converters. 732 733config REGULATOR_MAX77686 734 tristate "Maxim 77686 regulator" 735 depends on MFD_MAX77686 || COMPILE_TEST 736 help 737 This driver controls a Maxim 77686 regulator 738 via I2C bus. The provided regulator is suitable for 739 Exynos-4 chips to control VARM and VINT voltages. 740 741config REGULATOR_MAX77693 742 tristate "Maxim 77693/77843 regulator" 743 depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST 744 help 745 This driver controls a Maxim 77693/77843 regulators via I2C bus. 746 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' 747 and one current regulator 'CHARGER'. This is suitable for 748 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. 749 750config REGULATOR_MAX77802 751 tristate "Maxim 77802 regulator" 752 depends on MFD_MAX77686 || COMPILE_TEST 753 help 754 This driver controls a Maxim 77802 regulator 755 via I2C bus. The provided regulator is suitable for 756 Exynos5420/Exynos5800 SoCs to control various voltages. 757 It includes support for control of voltage and ramp speed. 758 759config REGULATOR_MAX77826 760 tristate "Maxim 77826 regulator" 761 depends on I2C 762 select REGMAP_I2C 763 help 764 This driver controls a Maxim 77826 regulator via I2C bus. 765 The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. 766 It includes support for control of output voltage. This 767 regulator is found on the Samsung Galaxy S5 (klte) smartphone. 768 769config REGULATOR_MC13XXX_CORE 770 tristate 771 772config REGULATOR_MC13783 773 tristate "Freescale MC13783 regulator driver" 774 depends on MFD_MC13XXX 775 select REGULATOR_MC13XXX_CORE 776 help 777 Say y here to support the regulators found on the Freescale MC13783 778 PMIC. 779 780config REGULATOR_MC13892 781 tristate "Freescale MC13892 regulator driver" 782 depends on MFD_MC13XXX 783 select REGULATOR_MC13XXX_CORE 784 help 785 Say y here to support the regulators found on the Freescale MC13892 786 PMIC. 787 788config REGULATOR_MCP16502 789 tristate "Microchip MCP16502 PMIC" 790 depends on I2C && OF 791 select REGMAP_I2C 792 help 793 Say y here to support the MCP16502 PMIC. This driver supports 794 basic operations (get/set voltage, get/set operating mode) 795 through the regulator interface. In addition it enables 796 suspend-to-ram/standby transition. 797 798config REGULATOR_MP5416 799 tristate "Monolithic MP5416 PMIC" 800 depends on I2C && OF 801 select REGMAP_I2C 802 help 803 Say y here to support the MP5416 PMIC. This will enable supports 804 the software controllable 4 buck and 4 LDO regulators. 805 Say M here if you want to include support for the regulator as a 806 module. 807 808config REGULATOR_MP8859 809 tristate "MPS MP8859 regulator driver" 810 depends on I2C 811 select REGMAP_I2C 812 help 813 Say y here to support the MP8859 voltage regulator. This driver 814 supports basic operations (get/set voltage) through the regulator 815 interface. 816 Say M here if you want to include support for the regulator as a 817 module. The module will be named "mp8859". 818 819config REGULATOR_MP886X 820 tristate "MPS MP8869 regulator driver" 821 depends on I2C && OF 822 select REGMAP_I2C 823 help 824 This driver supports the MP8869 voltage regulator. 825 826config REGULATOR_MPQ7920 827 tristate "Monolithic MPQ7920 PMIC" 828 depends on I2C && OF 829 select REGMAP_I2C 830 help 831 Say y here to support the MPQ7920 PMIC. This will enable supports 832 the software controllable 4 buck and 5 LDO regulators. 833 This driver supports the control of different power rails of device 834 through regulator interface. 835 836config REGULATOR_MT6311 837 tristate "MediaTek MT6311 PMIC" 838 depends on I2C 839 select REGMAP_I2C 840 help 841 Say y here to select this option to enable the power regulator of 842 MediaTek MT6311 PMIC. 843 This driver supports the control of different power rails of device 844 through regulator interface. 845 846config REGULATOR_MT6315 847 tristate "MediaTek MT6315 PMIC" 848 depends on SPMI 849 select REGMAP_SPMI 850 help 851 Say y here to select this option to enable the power regulator of 852 MediaTek MT6315 PMIC. 853 This driver supports the control of different power rails of device 854 through regulator interface. 855 856config REGULATOR_MT6323 857 tristate "MediaTek MT6323 PMIC" 858 depends on MFD_MT6397 859 help 860 Say y here to select this option to enable the power regulator of 861 MediaTek MT6323 PMIC. 862 This driver supports the control of different power rails of device 863 through regulator interface. 864 865config REGULATOR_MT6331 866 tristate "MediaTek MT6331 PMIC" 867 depends on MFD_MT6397 868 help 869 Say y here to select this option to enable the power regulator of 870 MediaTek MT6331 PMIC. 871 This driver supports the control of different power rails of device 872 through regulator interface 873 874config REGULATOR_MT6332 875 tristate "MediaTek MT6332 PMIC" 876 depends on MFD_MT6397 877 help 878 Say y here to select this option to enable the power regulator of 879 MediaTek MT6332 PMIC. 880 This driver supports the control of different power rails of device 881 through regulator interface 882 883config REGULATOR_MT6357 884 tristate "MediaTek MT6357 PMIC" 885 depends on MFD_MT6397 886 help 887 Say y here to select this option to enable the power regulator of 888 MediaTek MT6357 PMIC. 889 This driver supports the control of different power rails of device 890 through regulator interface. 891 892config REGULATOR_MT6358 893 tristate "MediaTek MT6358 PMIC" 894 depends on MFD_MT6397 895 help 896 Say y here to select this option to enable the power regulator of 897 MediaTek MT6358 PMIC. 898 This driver supports the control of different power rails of device 899 through regulator interface. 900 901config REGULATOR_MT6359 902 tristate "MediaTek MT6359 PMIC" 903 depends on MFD_MT6397 904 help 905 Say y here to select this option to enable the power regulator of 906 MediaTek MT6359 PMIC. 907 This driver supports the control of different power rails of device 908 through regulator interface. 909 910config REGULATOR_MT6360 911 tristate "MT6360 SubPMIC Regulator" 912 depends on MFD_MT6360 913 help 914 Say Y here to enable MT6360 regulator support. 915 This is support MT6360 PMIC/LDO part include 916 2-channel buck with Thermal Shutdown and Overload Protection 917 6-channel High PSRR and Low Dropout LDO. 918 919config REGULATOR_MT6370 920 tristate "MT6370 SubPMIC Regulator" 921 depends on MFD_MT6370 922 help 923 Say Y here to enable MT6370 regulator support. 924 This driver supports the control for DisplayBias voltages and one 925 general purpose LDO which is commonly used to drive the vibrator. 926 927config REGULATOR_MT6380 928 tristate "MediaTek MT6380 PMIC" 929 depends on MTK_PMIC_WRAP 930 help 931 Say y here to select this option to enable the power regulator of 932 MediaTek MT6380 PMIC. 933 This driver supports the control of different power rails of device 934 through regulator interface. 935 936config REGULATOR_MT6397 937 tristate "MediaTek MT6397 PMIC" 938 depends on MFD_MT6397 939 help 940 Say y here to select this option to enable the power regulator of 941 MediaTek MT6397 PMIC. 942 This driver supports the control of different power rails of device 943 through regulator interface. 944 945config REGULATOR_MTK_DVFSRC 946 tristate "MediaTek DVFSRC regulator driver" 947 depends on MTK_DVFSRC 948 help 949 Say y here to control regulator by DVFSRC (dynamic voltage 950 and frequency scaling resource collector). 951 This driver supports to control regulators via the DVFSRC 952 of Mediatek. It allows for voting on regulator state 953 between multiple users. 954 955config REGULATOR_PALMAS 956 tristate "TI Palmas PMIC Regulators" 957 depends on MFD_PALMAS 958 help 959 If you wish to control the regulators on the Palmas series of 960 chips say Y here. This will enable support for all the software 961 controllable SMPS/LDO regulators. 962 963 The regulators available on Palmas series chips vary depending 964 on the muxing. This is handled automatically in the driver by 965 reading the mux info from OTP. 966 967config REGULATOR_PBIAS 968 tristate "PBIAS OMAP regulator driver" 969 depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON 970 help 971 Say y here to support pbias regulator for mmc1:SD card i/o 972 on OMAP SoCs. 973 This driver provides support for OMAP pbias modelled 974 regulators. 975 976config REGULATOR_PCA9450 977 tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" 978 depends on I2C 979 select REGMAP_I2C 980 help 981 Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC 982 regulator driver. 983 984config REGULATOR_PCAP 985 tristate "Motorola PCAP2 regulator driver" 986 depends on EZX_PCAP 987 help 988 This driver provides support for the voltage regulators of the 989 PCAP2 PMIC. 990 991config REGULATOR_PCF50633 992 tristate "NXP PCF50633 regulator driver" 993 depends on MFD_PCF50633 994 help 995 Say Y here to support the voltage regulators and converters 996 on PCF50633 997 998config REGULATOR_PF8X00 999 tristate "NXP PF8100/PF8121A/PF8200 regulator driver" 1000 depends on I2C && OF 1001 select REGMAP_I2C 1002 help 1003 Say y here to support the regulators found on the NXP 1004 PF8100/PF8121A/PF8200 PMIC. 1005 1006 Say M here if you want to support for the regulators found 1007 on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named 1008 "pf8x00-regulator". 1009 1010config REGULATOR_PFUZE100 1011 tristate "Freescale PFUZE100/200/3000/3001 regulator driver" 1012 depends on I2C && OF 1013 select REGMAP_I2C 1014 help 1015 Say y here to support the regulators found on the Freescale 1016 PFUZE100/200/3000/3001 PMIC. 1017 1018config REGULATOR_PV88060 1019 tristate "Powerventure Semiconductor PV88060 regulator" 1020 depends on I2C 1021 select REGMAP_I2C 1022 help 1023 Say y here to support the voltage regulators and convertors 1024 PV88060 1025 1026config REGULATOR_PV88080 1027 tristate "Powerventure Semiconductor PV88080 regulator" 1028 depends on I2C 1029 select REGMAP_I2C 1030 help 1031 Say y here to support the buck convertors on PV88080 1032 1033config REGULATOR_PV88090 1034 tristate "Powerventure Semiconductor PV88090 regulator" 1035 depends on I2C 1036 select REGMAP_I2C 1037 help 1038 Say y here to support the voltage regulators and convertors 1039 on PV88090 1040 1041config REGULATOR_PWM 1042 tristate "PWM voltage regulator" 1043 depends on PWM 1044 help 1045 This driver supports PWM controlled voltage regulators. PWM 1046 duty cycle can increase or decrease the voltage. 1047 1048config REGULATOR_QCOM_PM8008 1049 tristate "Qualcomm PM8008 PMIC regulators" 1050 depends on MFD_QCOM_PM8008 1051 help 1052 Select this option to enable support for the voltage regulators in 1053 Qualcomm PM8008 PMICs. 1054 1055config REGULATOR_QCOM_REFGEN 1056 tristate "Qualcomm REFGEN regulator driver" 1057 depends on ARCH_QCOM || COMPILE_TEST 1058 depends on HAS_IOMEM 1059 depends on REGMAP 1060 help 1061 This driver supports the MMIO-mapped reference voltage regulator, 1062 used internally by some PHYs on many Qualcomm SoCs. 1063 1064 Say M here if you want to include support for this regulator as 1065 a module. The module will be named "qcom-refgen-regulator". 1066 1067config REGULATOR_QCOM_RPM 1068 tristate "Qualcomm RPM regulator driver" 1069 depends on MFD_QCOM_RPM 1070 help 1071 If you say yes to this option, support will be included for the 1072 regulators exposed by the Resource Power Manager found in Qualcomm 1073 8660, 8960 and 8064 based devices. 1074 1075 Say M here if you want to include support for the regulators on the 1076 Qualcomm RPM as a module. The module will be named 1077 "qcom_rpm-regulator". 1078 1079config REGULATOR_QCOM_RPMH 1080 tristate "Qualcomm Technologies, Inc. RPMh regulator driver" 1081 depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST) 1082 depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST) 1083 help 1084 This driver supports control of PMIC regulators via the RPMh hardware 1085 block found on Qualcomm Technologies Inc. SoCs. RPMh regulator 1086 control allows for voting on regulator state between multiple 1087 processors within the SoC. 1088 1089config REGULATOR_QCOM_SMD_RPM 1090 tristate "Qualcomm SMD based RPM regulator driver" 1091 depends on QCOM_SMD_RPM 1092 help 1093 If you say yes to this option, support will be included for the 1094 regulators exposed by the Resource Power Manager found in Qualcomm 1095 8974 based devices. 1096 1097 Say M here if you want to include support for the regulators on the 1098 Qualcomm RPM as a module. The module will be named 1099 "qcom_smd-regulator". 1100 1101config REGULATOR_QCOM_SPMI 1102 tristate "Qualcomm SPMI regulator driver" 1103 depends on SPMI || COMPILE_TEST 1104 help 1105 If you say yes to this option, support will be included for the 1106 regulators found in Qualcomm SPMI PMICs. 1107 1108 Say M here if you want to include support for the regulators on the 1109 Qualcomm SPMI PMICs as a module. The module will be named 1110 "qcom_spmi-regulator". 1111 1112config REGULATOR_QCOM_USB_VBUS 1113 tristate "Qualcomm USB Vbus regulator driver" 1114 depends on SPMI || COMPILE_TEST 1115 help 1116 If you say yes to this option, support will be included for the 1117 regulator used to enable the VBUS output. 1118 1119 Say M here if you want to include support for enabling the VBUS output 1120 as a module. The module will be named "qcom_usb_vbus_regulator". 1121 1122config REGULATOR_RAA215300 1123 tristate "Renesas RAA215300 driver" 1124 select REGMAP_I2C 1125 depends on COMMON_CLK 1126 depends on I2C 1127 help 1128 If you say yes to this option, support will be included for the 1129 Renesas RAA215300 PMIC. 1130 1131 Say M here if you want to include support for Renesas RAA215300 PMIC 1132 as a module. The module will be named "raa215300". 1133 1134config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY 1135 tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator" 1136 depends on BACKLIGHT_CLASS_DEVICE 1137 depends on I2C 1138 depends on OF_GPIO 1139 select REGMAP_I2C 1140 help 1141 This driver supports ATTINY regulator on the Raspberry Pi 7-inch 1142 touchscreen unit. The regulator is used to enable power to the 1143 TC358762, display and to control backlight. 1144 1145config REGULATOR_RC5T583 1146 tristate "RICOH RC5T583 Power regulators" 1147 depends on MFD_RC5T583 1148 help 1149 Select this option to enable the power regulator of RICOH 1150 PMIC RC5T583. 1151 This driver supports the control of different power rails of device 1152 through regulator interface. The device supports multiple DCDC/LDO 1153 outputs which can be controlled by i2c communication. 1154 1155config REGULATOR_RK808 1156 tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators" 1157 depends on MFD_RK8XX 1158 help 1159 Select this option to enable the power regulator of ROCKCHIP 1160 PMIC RK805,RK809&RK817,RK808 and RK818. 1161 This driver supports the control of different power rails of device 1162 through regulator interface. The device supports multiple DCDC/LDO 1163 outputs which can be controlled by i2c communication. 1164 1165config REGULATOR_RN5T618 1166 tristate "Ricoh RN5T567/618 voltage regulators" 1167 depends on MFD_RN5T618 1168 help 1169 Say y here to support the regulators found on Ricoh RN5T567, 1170 RN5T618 or RC5T619 PMIC. 1171 1172config REGULATOR_ROHM 1173 tristate 1174 1175config REGULATOR_RT4801 1176 tristate "Richtek RT4801 Regulators" 1177 depends on I2C 1178 select REGMAP_I2C 1179 help 1180 This adds support for voltage regulators in Richtek RT4801 Display Bias IC. 1181 The device supports two regulators (DSVP/DSVN). 1182 1183config REGULATOR_RT4803 1184 tristate "Richtek RT4803 boost regualtor" 1185 depends on I2C 1186 select REGMAP_I2C 1187 help 1188 This adds support for RT4803 boost converter that integrates the 1189 bypass switch. If the input voltage is low than the required voltage, 1190 RT4803 will enter boost mode. Otherwise, enable internal bypass 1191 switch to enter bypass mode. 1192 1193config REGULATOR_RT4831 1194 tristate "Richtek RT4831 DSV Regulators" 1195 depends on MFD_RT4831 1196 help 1197 This adds support for voltage regulators in Richtek RT4831. 1198 There are three regulators (VLCM/DSVP/DSVN). 1199 VLCM is a virtual voltage input for DSVP/DSVN inside IC. 1200 And DSVP/DSVN is the real Vout range from 4V to 6.5V. 1201 It's common used to provide the power for the display panel. 1202 1203config REGULATOR_RT5033 1204 tristate "Richtek RT5033 Regulators" 1205 depends on MFD_RT5033 1206 help 1207 This adds support for voltage and current regulators in Richtek 1208 RT5033 PMIC. The device supports multiple regulators like 1209 current source, LDO and Buck. 1210 1211config REGULATOR_RT5120 1212 tristate "Richtek RT5120 PMIC Regulators" 1213 depends on MFD_RT5120 1214 help 1215 This adds support for voltage regulator in Richtek RT5120 PMIC. 1216 It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN 1217 to control external power source. Only BUCK1 is adjustable from 1218 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage 1219 by external hardware circuit. 1220 1221config REGULATOR_RT5190A 1222 tristate "Richtek RT5190A PMIC" 1223 depends on I2C 1224 select REGMAP_I2C 1225 help 1226 This adds support for voltage regulator in Richtek RT5190A PMIC. 1227 It integratas 1 channel buck controller, 3 channels high efficiency 1228 buck converters, 1 LDO, mute AC OFF depop function, with the general 1229 I2C control interface. 1230 1231config REGULATOR_RT5739 1232 tristate "Richtek RT5739 Regulator" 1233 depends on I2C 1234 select REGMAP_I2C 1235 help 1236 This adds support for voltage regulator in Richtek RT5739. 1237 It's a step-down switching voltage regulator. Using a proprietary 1238 architecture with synchronous rectification, it is capable of 1239 delivering 3.5A continuously at over 80% efficiency. 1240 1241 This driver can also be built as a module. If so, the module 1242 will be called rt5739. 1243 1244config REGULATOR_RT5759 1245 tristate "Richtek RT5759 Regulator" 1246 depends on I2C 1247 select REGMAP_I2C 1248 help 1249 This adds support for voltage regulator in Richtek RT5759. 1250 The RT5759 is a high-performance, synchronous step-down DC-DC 1251 converter that can deliver up to 9A output current from 3V to 6.5V 1252 input supply. 1253 1254config REGULATOR_RT6160 1255 tristate "Richtek RT6160 BuckBoost voltage regulator" 1256 depends on I2C 1257 select REGMAP_I2C 1258 help 1259 This adds support for voltage regulator in Richtek RT6160. 1260 This device automatically change voltage output mode from 1261 Buck or Boost. The mode transition depend on the input source voltage. 1262 The wide output range is from 2025mV to 5200mV and can be used on most 1263 common application scenario. 1264 1265config REGULATOR_RT6190 1266 tristate "Richtek RT6190 4-Switch BuckBoost controller" 1267 depends on I2C 1268 select REGMAP_I2C 1269 help 1270 The RT6190 is a 4-Switch BuckBoost controller designed for converting 1271 input voltage to output voltage that can be equal to, higher or lower 1272 than input voltage. It operates with wide input voltage range from 1273 4.5V to 36V, and the output voltage can be set from 3V to 36V by 1274 external FB pin. 1275 1276config REGULATOR_RT6245 1277 tristate "Richtek RT6245 voltage regulator" 1278 depends on I2C 1279 select REGMAP_I2C 1280 help 1281 This adds support for Richtek RT6245 voltage regulator. 1282 It can support up to 14A output current and adjustable output voltage 1283 from 0.4375V to 1.3875V, per step 12.5mV. 1284 1285config REGULATOR_RTQ2134 1286 tristate "Richtek RTQ2134 SubPMIC Regulator" 1287 depends on I2C 1288 select REGMAP_I2C 1289 help 1290 This driver adds support for RTQ2134 SubPMIC regulators. 1291 The RTQ2134 is a multi-phase, programmable power management IC that 1292 integrate with four high efficient, synchronous step-down converter 1293 cores. It features wide output voltage range and the capability to 1294 configure the corresponding power stages. 1295 1296config REGULATOR_RTMV20 1297 tristate "Richtek RTMV20 Laser Diode Regulator" 1298 depends on I2C 1299 select REGMAP_I2C 1300 help 1301 This driver adds support for the load switch current regulator on 1302 the Richtek RTMV20. It can support the load current up to 6A and 1303 integrate strobe/vsync/fsin signal to synchronize the IR camera. 1304 1305config REGULATOR_RTQ6752 1306 tristate "Richtek RTQ6752 TFT LCD voltage regulator" 1307 depends on I2C 1308 select REGMAP_I2C 1309 help 1310 This driver adds support for Richtek RTQ6752. RTQ6752 includes two 1311 synchronous boost converters for PAVDD, and one synchronous NAVDD 1312 buck-boost. This device is suitable for automotive TFT-LCD panel. 1313 1314config REGULATOR_RTQ2208 1315 tristate "Richtek RTQ2208 SubPMIC Regulator" 1316 depends on I2C 1317 select REGMAP_I2C 1318 help 1319 This driver adds support for RTQ2208 SubPMIC regulators. 1320 The RTQ2208 is a multi-phase, programmable power management IC that 1321 integrate with dual multi-configurable, synchronous buck converters 1322 and two ldos. It features wide output voltage range from 0.4V to 2.05V 1323 and the capability to configure the corresponding power stages. 1324 1325config REGULATOR_S2MPA01 1326 tristate "Samsung S2MPA01 voltage regulator" 1327 depends on MFD_SEC_CORE || COMPILE_TEST 1328 help 1329 This driver controls Samsung S2MPA01 voltage output regulator 1330 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. 1331 1332config REGULATOR_S2MPS11 1333 tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" 1334 depends on MFD_SEC_CORE || COMPILE_TEST 1335 help 1336 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage 1337 output regulator via I2C bus. The chip is comprised of high efficient 1338 Buck converters including Dual-Phase Buck converter, Buck-Boost 1339 converter, various LDOs. 1340 1341config REGULATOR_S5M8767 1342 tristate "Samsung S5M8767A voltage regulator" 1343 depends on MFD_SEC_CORE || COMPILE_TEST 1344 help 1345 This driver supports a Samsung S5M8767A voltage output regulator 1346 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and 1347 supports DVS mode with 8bits of output voltage control. 1348 1349config REGULATOR_SC2731 1350 tristate "Spreadtrum SC2731 power regulator driver" 1351 depends on MFD_SC27XX_PMIC || COMPILE_TEST 1352 help 1353 This driver provides support for the voltage regulators on the 1354 SC2731 PMIC. 1355 1356config REGULATOR_SKY81452 1357 tristate "Skyworks Solutions SKY81452 voltage regulator" 1358 depends on MFD_SKY81452 1359 help 1360 This driver supports Skyworks SKY81452 voltage output regulator 1361 via I2C bus. SKY81452 has one voltage linear regulator can be 1362 programmed from 4.5V to 20V. 1363 1364 This driver can also be built as a module. If so, the module 1365 will be called sky81452-regulator. 1366 1367config REGULATOR_SLG51000 1368 tristate "Dialog Semiconductor SLG51000 regulators" 1369 depends on I2C 1370 select REGMAP_I2C 1371 help 1372 Say y here to support for the Dialog Semiconductor SLG51000. 1373 The SLG51000 is seven compact and customizable low dropout 1374 regulators. 1375 1376config REGULATOR_SM5703 1377 tristate "Silicon Mitus SM5703 regulators" 1378 depends on MFD_SM5703 1379 help 1380 This driver provides support for voltage regulators of SM5703 1381 multi-function device. 1382 1383config REGULATOR_STM32_BOOSTER 1384 tristate "STMicroelectronics STM32 BOOSTER" 1385 depends on ARCH_STM32 || COMPILE_TEST 1386 help 1387 This driver supports internal booster (3V3) embedded in some 1388 STMicroelectronics STM32 chips. It can be used to supply ADC analog 1389 input switches when vdda supply is below 2.7V. 1390 1391 This driver can also be built as a module. If so, the module 1392 will be called stm32-booster. 1393 1394config REGULATOR_STM32_VREFBUF 1395 tristate "STMicroelectronics STM32 VREFBUF" 1396 depends on ARCH_STM32 || COMPILE_TEST 1397 help 1398 This driver supports STMicroelectronics STM32 VREFBUF (voltage 1399 reference buffer) which can be used as voltage reference for 1400 internal ADCs, DACs and also for external components through 1401 dedicated Vref+ pin. 1402 1403 This driver can also be built as a module. If so, the module 1404 will be called stm32-vrefbuf. 1405 1406config REGULATOR_STM32_PWR 1407 bool "STMicroelectronics STM32 PWR" 1408 depends on ARCH_STM32 || COMPILE_TEST 1409 help 1410 This driver supports internal regulators (1V1, 1V8, 3V3) in the 1411 STMicroelectronics STM32 chips. 1412 1413config REGULATOR_STPMIC1 1414 tristate "STMicroelectronics STPMIC1 PMIC Regulators" 1415 depends on MFD_STPMIC1 1416 help 1417 This driver supports STMicroelectronics STPMIC1 PMIC voltage 1418 regulators and switches. The STPMIC1 regulators supply power to 1419 an application processor as well as to external system 1420 peripherals such as DDR, Flash memories and system devices. 1421 1422 To compile this driver as a module, choose M here: the 1423 module will be called stpmic1_regulator. 1424 1425config REGULATOR_TI_ABB 1426 tristate "TI Adaptive Body Bias on-chip LDO" 1427 depends on ARCH_OMAP || COMPILE_TEST 1428 help 1429 Select this option to support Texas Instruments' on-chip Adaptive Body 1430 Bias (ABB) LDO regulators. It is recommended that this option be 1431 enabled on required TI SoC. Certain Operating Performance Points 1432 on TI SoCs may be unstable without enabling this as it provides 1433 device specific optimized bias to allow/optimize functionality. 1434 1435config REGULATOR_STW481X_VMMC 1436 bool "ST Microelectronics STW481X VMMC regulator" 1437 depends on MFD_STW481X || COMPILE_TEST 1438 default y if MFD_STW481X 1439 help 1440 This driver supports the internal VMMC regulator in the STw481x 1441 PMIC chips. 1442 1443config REGULATOR_SUN20I 1444 tristate "Allwinner D1 internal LDOs" 1445 depends on ARCH_SUNXI || COMPILE_TEST 1446 select MFD_SYSCON 1447 default ARCH_SUNXI 1448 help 1449 This driver supports the internal LDOs in the Allwinner D1 SoC. 1450 1451config REGULATOR_SY7636A 1452 tristate "Silergy SY7636A voltage regulator" 1453 depends on MFD_SY7636A 1454 help 1455 This driver supports Silergy SY3686A voltage regulator. 1456 1457config REGULATOR_SY8106A 1458 tristate "Silergy SY8106A regulator" 1459 depends on I2C && OF 1460 select REGMAP_I2C 1461 help 1462 This driver supports SY8106A single output regulator. 1463 1464config REGULATOR_SY8824X 1465 tristate "Silergy SY8824C/SY8824E regulator" 1466 depends on I2C && OF 1467 select REGMAP_I2C 1468 help 1469 This driver supports SY8824C single output regulator. 1470 1471config REGULATOR_SY8827N 1472 tristate "Silergy SY8827N regulator" 1473 depends on I2C && OF 1474 select REGMAP_I2C 1475 help 1476 This driver supports SY8827N single output regulator. 1477 1478config REGULATOR_TPS51632 1479 tristate "TI TPS51632 Power Regulator" 1480 depends on I2C 1481 select REGMAP_I2C 1482 help 1483 This driver supports TPS51632 voltage regulator chip. 1484 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller 1485 with Serial VID control and DVFS. 1486 The voltage output can be configure through I2C interface or PWM 1487 interface. 1488 1489config REGULATOR_TPS6105X 1490 tristate "TI TPS6105X Power regulators" 1491 depends on TPS6105X 1492 default y if TPS6105X 1493 help 1494 This driver supports TPS61050/TPS61052 voltage regulator chips. 1495 It is a single boost converter primarily for white LEDs and 1496 audio amplifiers. 1497 1498config REGULATOR_TPS62360 1499 tristate "TI TPS6236x Power Regulator" 1500 depends on I2C 1501 select REGMAP_I2C 1502 help 1503 This driver supports TPS6236x voltage regulator chip. This 1504 regulator is meant for processor core supply. This chip is 1505 high-frequency synchronous step down dc-dc converter optimized 1506 for battery-powered portable applications. 1507 1508config REGULATOR_TPS6286X 1509 tristate "TI TPS6286x Power Regulator" 1510 depends on I2C && OF 1511 select REGMAP_I2C 1512 help 1513 This driver supports TPS6236x voltage regulator chips. These are 1514 high-frequency synchronous step-down converters with an I2C 1515 interface. 1516 1517config REGULATOR_TPS6287X 1518 tristate "TI TPS6287x Power Regulator" 1519 depends on I2C && OF 1520 select REGMAP_I2C 1521 help 1522 This driver supports TPS6287x voltage regulator chips. These are 1523 pin-to-pin high-frequency synchronous step-down dc-dc converters 1524 with an I2C interface. 1525 1526 If built as a module it will be called tps6287x-regulator. 1527 1528config REGULATOR_TPS65023 1529 tristate "TI TPS65023 Power regulators" 1530 depends on I2C 1531 select REGMAP_I2C 1532 help 1533 This driver supports TPS65023 voltage regulator chips. TPS65023 provides 1534 three step-down converters and two general-purpose LDO voltage regulators. 1535 It supports TI's software based Class-2 SmartReflex implementation. 1536 1537config REGULATOR_TPS6507X 1538 tristate "TI TPS6507X Power regulators" 1539 depends on I2C 1540 help 1541 This driver supports TPS6507X voltage regulator chips. TPS6507X provides 1542 three step-down converters and two general-purpose LDO voltage regulators. 1543 It supports TI's software based Class-2 SmartReflex implementation. 1544 1545config REGULATOR_TPS65086 1546 tristate "TI TPS65086 Power regulators" 1547 depends on MFD_TPS65086 1548 help 1549 This driver provides support for the voltage regulators on 1550 TI TPS65086 PMICs. 1551 1552config REGULATOR_TPS65090 1553 tristate "TI TPS65090 Power regulator" 1554 depends on MFD_TPS65090 1555 help 1556 This driver provides support for the voltage regulators on the 1557 TI TPS65090 PMIC. 1558 1559config REGULATOR_TPS65132 1560 tristate "TI TPS65132 Dual Output Power regulators" 1561 depends on I2C && GPIOLIB 1562 select REGMAP_I2C 1563 help 1564 This driver supports TPS65132 single inductor - dual output 1565 power supply specifically designed for display panels. 1566 1567config REGULATOR_TPS65217 1568 tristate "TI TPS65217 Power regulators" 1569 depends on MFD_TPS65217 1570 help 1571 This driver supports TPS65217 voltage regulator chips. TPS65217 1572 provides three step-down converters and four general-purpose LDO 1573 voltage regulators. It supports software based voltage control 1574 for different voltage domains 1575 1576config REGULATOR_TPS65218 1577 tristate "TI TPS65218 Power regulators" 1578 depends on MFD_TPS65218 && OF 1579 help 1580 This driver supports TPS65218 voltage regulator chips. TPS65218 1581 provides six step-down converters and one general-purpose LDO 1582 voltage regulators. It supports software based voltage control 1583 for different voltage domains 1584 1585config REGULATOR_TPS65219 1586 tristate "TI TPS65219 Power regulators" 1587 depends on MFD_TPS65219 && OF 1588 help 1589 This driver supports TPS65219 voltage regulator chips. 1590 TPS65219 series of PMICs have 3 single phase BUCKs & 4 LDOs 1591 voltage regulators. It supports software based voltage control 1592 for different voltage domains. 1593 1594config REGULATOR_TPS6594 1595 tristate "TI TPS6594 Power regulators" 1596 depends on MFD_TPS6594 && OF 1597 default MFD_TPS6594 1598 help 1599 This driver supports TPS6594 series and TPS65224 voltage regulator chips. 1600 TPS6594 series of PMICs have 5 BUCKs and 4 LDOs 1601 voltage regulators. 1602 BUCKs 1,2,3,4 can be used in single phase or multiphase mode. 1603 Part number defines which single or multiphase mode is i used. 1604 It supports software based voltage control 1605 for different voltage domains. 1606 TPS65224 PMIC has 4 BUCKs and 3 LDOs. BUCK12 can be used in dual phase. 1607 All BUCKs and LDOs volatge can be controlled through software. 1608 1609config REGULATOR_TPS6524X 1610 tristate "TI TPS6524X Power regulators" 1611 depends on SPI 1612 help 1613 This driver supports TPS6524X voltage regulator chips. TPS6524X 1614 provides three step-down converters and two general-purpose LDO 1615 voltage regulators. This device is interfaced using a customized 1616 serial interface currently supported on the sequencer serial 1617 port controller. 1618 1619config REGULATOR_TPS6586X 1620 tristate "TI TPS6586X Power regulators" 1621 depends on MFD_TPS6586X 1622 help 1623 This driver supports TPS6586X voltage regulator chips. 1624 1625config REGULATOR_TPS65910 1626 tristate "TI TPS65910/TPS65911 Power Regulators" 1627 depends on MFD_TPS65910 1628 help 1629 This driver supports TPS65910/TPS65911 voltage regulator chips. 1630 1631config REGULATOR_TPS65912 1632 tristate "TI TPS65912 Power regulator" 1633 depends on MFD_TPS65912 1634 help 1635 This driver supports TPS65912 voltage regulator chip. 1636 1637config REGULATOR_TPS68470 1638 tristate "TI TPS68470 PMIC Regulators Driver" 1639 depends on INTEL_SKL_INT3472 || COMPILE_TEST 1640 help 1641 This driver adds support for the TPS68470 PMIC to register 1642 regulators against the usual framework. 1643 1644 The module will be called "tps68470-regulator". 1645 1646config REGULATOR_TWL4030 1647 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" 1648 depends on TWL4030_CORE 1649 help 1650 This driver supports the voltage regulators provided by 1651 this family of companion chips. 1652 1653config REGULATOR_UNIPHIER 1654 tristate "UniPhier regulator driver" 1655 depends on ARCH_UNIPHIER || COMPILE_TEST 1656 depends on OF 1657 select REGMAP_MMIO 1658 default ARCH_UNIPHIER 1659 help 1660 Support for regulators implemented on Socionext UniPhier SoCs. 1661 1662config REGULATOR_RZG2L_VBCTRL 1663 tristate "Renesas RZ/G2L USB VBUS regulator driver" 1664 depends on RESET_RZG2L_USBPHY_CTRL || COMPILE_TEST 1665 depends on OF 1666 select REGMAP_MMIO 1667 default RESET_RZG2L_USBPHY_CTRL 1668 help 1669 Support for VBUS regulators implemented on Renesas RZ/G2L SoCs. 1670 1671config REGULATOR_VCTRL 1672 tristate "Voltage controlled regulators" 1673 depends on OF 1674 help 1675 This driver provides support for voltage regulators whose output 1676 voltage is controlled by the voltage of another regulator. 1677 1678config REGULATOR_VEXPRESS 1679 tristate "Versatile Express regulators" 1680 depends on VEXPRESS_CONFIG 1681 help 1682 This driver provides support for voltage regulators available 1683 on the ARM Ltd's Versatile Express platform. 1684 1685config REGULATOR_VQMMC_IPQ4019 1686 tristate "IPQ4019 VQMMC SD LDO regulator support" 1687 depends on ARCH_QCOM 1688 help 1689 This driver provides support for the VQMMC LDO I/0 1690 voltage regulator of the IPQ4019 SD/EMMC controller. 1691 1692config REGULATOR_WM831X 1693 tristate "Wolfson Microelectronics WM831x PMIC regulators" 1694 depends on MFD_WM831X 1695 help 1696 Support the voltage and current regulators of the WM831x series 1697 of PMIC devices. 1698 1699config REGULATOR_WM8350 1700 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" 1701 depends on MFD_WM8350 1702 help 1703 This driver provides support for the voltage and current regulators 1704 of the WM8350 AudioPlus PMIC. 1705 1706config REGULATOR_WM8400 1707 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" 1708 depends on MFD_WM8400 1709 help 1710 This driver provides support for the voltage regulators of the 1711 WM8400 AudioPlus PMIC. 1712 1713config REGULATOR_WM8994 1714 tristate "Wolfson Microelectronics WM8994 CODEC" 1715 depends on MFD_WM8994 1716 help 1717 This driver provides support for the voltage regulators on the 1718 WM8994 CODEC. 1719 1720config REGULATOR_QCOM_LABIBB 1721 tristate "QCOM LAB/IBB regulator support" 1722 depends on SPMI || COMPILE_TEST 1723 help 1724 This driver supports Qualcomm's LAB/IBB regulators present on the 1725 Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI 1726 based PMIC implementations. LAB can be used as positive 1727 boost regulator and IBB can be used as a negative boost regulator 1728 for LCD display panel. 1729 1730endif 1731