1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * IDT CPS Gen.2 Serial RapidIO switch family support 4 * 5 * Copyright 2010 Integrated Device Technology, Inc. 6 * Alexandre Bounine <alexandre.bounine@idt.com> 7 */ 8 9 #include <linux/stat.h> 10 #include <linux/module.h> 11 #include <linux/rio.h> 12 #include <linux/rio_drv.h> 13 #include <linux/rio_ids.h> 14 #include <linux/delay.h> 15 16 #include <asm/page.h> 17 #include "../rio.h" 18 19 #define LOCAL_RTE_CONF_DESTID_SEL 0x010070 20 #define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f 21 22 #define IDT_LT_ERR_REPORT_EN 0x03100c 23 24 #define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40) 25 #define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04 26 27 #define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40) 28 #define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c 29 #define IDT_PORT_INIT_TX_ACQUIRED 0x00000020 30 31 #define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100) 32 #define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10 33 34 #define IDT_DEV_CTRL_1 0xf2000c 35 #define IDT_DEV_CTRL_1_GENPW 0x02000000 36 #define IDT_DEV_CTRL_1_PRSTBEH 0x00000001 37 38 #define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008 39 #define IDT_CFGBLK_ERR_REPORT 0xf20014 40 #define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002 41 42 #define IDT_AUX_PORT_ERR_CAP_EN 0x020000 43 #define IDT_AUX_ERR_REPORT_EN 0xf20018 44 #define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002 45 #define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001 46 47 #define IDT_ISLTL_ADDRESS_CAP 0x021014 48 49 #define IDT_RIO_DOMAIN 0xf20020 50 #define IDT_RIO_DOMAIN_MASK 0x000000ff 51 52 #define IDT_PW_INFO_CSR 0xf20024 53 54 #define IDT_SOFT_RESET 0xf20040 55 #define IDT_SOFT_RESET_REQ 0x00030097 56 57 #define IDT_I2C_MCTRL 0xf20050 58 #define IDT_I2C_MCTRL_GENPW 0x04000000 59 60 #define IDT_JTAG_CTRL 0xf2005c 61 #define IDT_JTAG_CTRL_GENPW 0x00000002 62 63 #define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100) 64 #define IDT_LANE_CTRL_BC 0xffff00 65 #define IDT_LANE_CTRL_GENPW 0x00200000 66 #define IDT_LANE_DFE_1_BC 0xffff18 67 #define IDT_LANE_DFE_2_BC 0xffff1c 68 69 #define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100) 70 #define IDT_PORT_OPS_GENPW 0x08000000 71 #define IDT_PORT_OPS_PL_ELOG 0x00000040 72 #define IDT_PORT_OPS_LL_ELOG 0x00000020 73 #define IDT_PORT_OPS_LT_ELOG 0x00000010 74 #define IDT_PORT_OPS_BC 0xf4ff04 75 76 #define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100) 77 78 #define IDT_ERR_CAP 0xfd0000 79 #define IDT_ERR_CAP_LOG_OVERWR 0x00000004 80 81 #define IDT_ERR_RD 0xfd0004 82 83 #define IDT_DEFAULT_ROUTE 0xde 84 #define IDT_NO_ROUTE 0xdf 85 86 static int 87 idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, 88 u16 table, u16 route_destid, u8 route_port) 89 { 90 /* 91 * Select routing table to update 92 */ 93 if (table == RIO_GLOBAL_TABLE) 94 table = 0; 95 else 96 table++; 97 98 if (route_port == RIO_INVALID_ROUTE) 99 route_port = IDT_DEFAULT_ROUTE; 100 101 rio_mport_write_config_32(mport, destid, hopcount, 102 LOCAL_RTE_CONF_DESTID_SEL, table); 103 104 /* 105 * Program destination port for the specified destID 106 */ 107 rio_mport_write_config_32(mport, destid, hopcount, 108 RIO_STD_RTE_CONF_DESTID_SEL_CSR, 109 (u32)route_destid); 110 111 rio_mport_write_config_32(mport, destid, hopcount, 112 RIO_STD_RTE_CONF_PORT_SEL_CSR, 113 (u32)route_port); 114 udelay(10); 115 116 return 0; 117 } 118 119 static int 120 idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, 121 u16 table, u16 route_destid, u8 *route_port) 122 { 123 u32 result; 124 125 /* 126 * Select routing table to read 127 */ 128 if (table == RIO_GLOBAL_TABLE) 129 table = 0; 130 else 131 table++; 132 133 rio_mport_write_config_32(mport, destid, hopcount, 134 LOCAL_RTE_CONF_DESTID_SEL, table); 135 136 rio_mport_write_config_32(mport, destid, hopcount, 137 RIO_STD_RTE_CONF_DESTID_SEL_CSR, 138 route_destid); 139 140 rio_mport_read_config_32(mport, destid, hopcount, 141 RIO_STD_RTE_CONF_PORT_SEL_CSR, &result); 142 143 if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result) 144 *route_port = RIO_INVALID_ROUTE; 145 else 146 *route_port = (u8)result; 147 148 return 0; 149 } 150 151 static int 152 idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, 153 u16 table) 154 { 155 u32 i; 156 157 /* 158 * Select routing table to read 159 */ 160 if (table == RIO_GLOBAL_TABLE) 161 table = 0; 162 else 163 table++; 164 165 rio_mport_write_config_32(mport, destid, hopcount, 166 LOCAL_RTE_CONF_DESTID_SEL, table); 167 168 for (i = RIO_STD_RTE_CONF_EXTCFGEN; 169 i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) { 170 rio_mport_write_config_32(mport, destid, hopcount, 171 RIO_STD_RTE_CONF_DESTID_SEL_CSR, i); 172 rio_mport_write_config_32(mport, destid, hopcount, 173 RIO_STD_RTE_CONF_PORT_SEL_CSR, 174 (IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) | 175 (IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE); 176 i += 4; 177 } 178 179 return 0; 180 } 181 182 183 static int 184 idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount, 185 u8 sw_domain) 186 { 187 /* 188 * Switch domain configuration operates only at global level 189 */ 190 rio_mport_write_config_32(mport, destid, hopcount, 191 IDT_RIO_DOMAIN, (u32)sw_domain); 192 return 0; 193 } 194 195 static int 196 idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, 197 u8 *sw_domain) 198 { 199 u32 regval; 200 201 /* 202 * Switch domain configuration operates only at global level 203 */ 204 rio_mport_read_config_32(mport, destid, hopcount, 205 IDT_RIO_DOMAIN, ®val); 206 207 *sw_domain = (u8)(regval & 0xff); 208 209 return 0; 210 } 211 212 static int 213 idtg2_em_init(struct rio_dev *rdev) 214 { 215 u32 regval; 216 int i, tmp; 217 218 /* 219 * This routine performs device-specific initialization only. 220 * All standard EM configuration should be performed at upper level. 221 */ 222 223 pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); 224 225 /* Set Port-Write info CSR: PRIO=3 and CRF=1 */ 226 rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000); 227 228 /* 229 * Configure LT LAYER error reporting. 230 */ 231 232 /* Enable standard (RIO.p8) error reporting */ 233 rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN, 234 REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR | 235 REM_LTL_ERR_UNSUPTR); 236 237 /* Use Port-Writes for LT layer error reporting. 238 * Enable per-port reset 239 */ 240 rio_read_config_32(rdev, IDT_DEV_CTRL_1, ®val); 241 rio_write_config_32(rdev, IDT_DEV_CTRL_1, 242 regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH); 243 244 /* 245 * Configure PORT error reporting. 246 */ 247 248 /* Report all RIO.p8 errors supported by device */ 249 rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037); 250 251 /* Configure reporting of implementation specific errors/events */ 252 rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC, 253 IDT_PORT_INIT_TX_ACQUIRED); 254 255 /* Use Port-Writes for port error reporting and enable error logging */ 256 tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo); 257 for (i = 0; i < tmp; i++) { 258 rio_read_config_32(rdev, IDT_PORT_OPS(i), ®val); 259 rio_write_config_32(rdev, 260 IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW | 261 IDT_PORT_OPS_PL_ELOG | 262 IDT_PORT_OPS_LL_ELOG | 263 IDT_PORT_OPS_LT_ELOG); 264 } 265 /* Overwrite error log if full */ 266 rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR); 267 268 /* 269 * Configure LANE error reporting. 270 */ 271 272 /* Disable line error reporting */ 273 rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0); 274 275 /* Use Port-Writes for lane error reporting (when enabled) 276 * (do per-lane update because lanes may have different configuration) 277 */ 278 tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16; 279 for (i = 0; i < tmp; i++) { 280 rio_read_config_32(rdev, IDT_LANE_CTRL(i), ®val); 281 rio_write_config_32(rdev, IDT_LANE_CTRL(i), 282 regval | IDT_LANE_CTRL_GENPW); 283 } 284 285 /* 286 * Configure AUX error reporting. 287 */ 288 289 /* Disable JTAG and I2C Error capture */ 290 rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0); 291 292 /* Disable JTAG and I2C Error reporting/logging */ 293 rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0); 294 295 /* Disable Port-Write notification from JTAG */ 296 rio_write_config_32(rdev, IDT_JTAG_CTRL, 0); 297 298 /* Disable Port-Write notification from I2C */ 299 rio_read_config_32(rdev, IDT_I2C_MCTRL, ®val); 300 rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW); 301 302 /* 303 * Configure CFG_BLK error reporting. 304 */ 305 306 /* Disable Configuration Block error capture */ 307 rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0); 308 309 /* Disable Port-Writes for Configuration Block error reporting */ 310 rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, ®val); 311 rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT, 312 regval & ~IDT_CFGBLK_ERR_REPORT_GENPW); 313 314 /* set TVAL = ~50us */ 315 rio_write_config_32(rdev, 316 rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8); 317 318 return 0; 319 } 320 321 static int 322 idtg2_em_handler(struct rio_dev *rdev, u8 portnum) 323 { 324 u32 regval, em_perrdet, em_ltlerrdet; 325 326 rio_read_config_32(rdev, 327 rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet); 328 if (em_ltlerrdet) { 329 /* Service Logical/Transport Layer Error(s) */ 330 if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) { 331 /* Implementation specific error reported */ 332 rio_read_config_32(rdev, 333 IDT_ISLTL_ADDRESS_CAP, ®val); 334 335 pr_debug("RIO: %s Implementation Specific LTL errors" \ 336 " 0x%x @(0x%x)\n", 337 rio_name(rdev), em_ltlerrdet, regval); 338 339 /* Clear implementation specific address capture CSR */ 340 rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0); 341 342 } 343 } 344 345 rio_read_config_32(rdev, 346 rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet); 347 if (em_perrdet) { 348 /* Service Port-Level Error(s) */ 349 if (em_perrdet & REM_PED_IMPL_SPEC) { 350 /* Implementation Specific port error reported */ 351 352 /* Get IS errors reported */ 353 rio_read_config_32(rdev, 354 IDT_PORT_ISERR_DET(portnum), ®val); 355 356 pr_debug("RIO: %s Implementation Specific Port" \ 357 " errors 0x%x\n", rio_name(rdev), regval); 358 359 /* Clear all implementation specific events */ 360 rio_write_config_32(rdev, 361 IDT_PORT_ISERR_DET(portnum), 0); 362 } 363 } 364 365 return 0; 366 } 367 368 static ssize_t 369 idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf) 370 { 371 struct rio_dev *rdev = to_rio_dev(dev); 372 ssize_t len = 0; 373 u32 regval; 374 375 while (!rio_read_config_32(rdev, IDT_ERR_RD, ®val)) { 376 if (!regval) /* 0 = end of log */ 377 break; 378 len += snprintf(buf + len, PAGE_SIZE - len, 379 "%08x\n", regval); 380 if (len >= (PAGE_SIZE - 10)) 381 break; 382 } 383 384 return len; 385 } 386 387 static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL); 388 389 static int idtg2_sysfs(struct rio_dev *rdev, bool create) 390 { 391 struct device *dev = &rdev->dev; 392 int err = 0; 393 394 if (create) { 395 /* Initialize sysfs entries */ 396 err = device_create_file(dev, &dev_attr_errlog); 397 if (err) 398 dev_err(dev, "Unable create sysfs errlog file\n"); 399 } else 400 device_remove_file(dev, &dev_attr_errlog); 401 402 return err; 403 } 404 405 static struct rio_switch_ops idtg2_switch_ops = { 406 .owner = THIS_MODULE, 407 .add_entry = idtg2_route_add_entry, 408 .get_entry = idtg2_route_get_entry, 409 .clr_table = idtg2_route_clr_table, 410 .set_domain = idtg2_set_domain, 411 .get_domain = idtg2_get_domain, 412 .em_init = idtg2_em_init, 413 .em_handle = idtg2_em_handler, 414 }; 415 416 static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id) 417 { 418 pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); 419 420 spin_lock(&rdev->rswitch->lock); 421 422 if (rdev->rswitch->ops) { 423 spin_unlock(&rdev->rswitch->lock); 424 return -EINVAL; 425 } 426 427 rdev->rswitch->ops = &idtg2_switch_ops; 428 429 if (rdev->do_enum) { 430 /* Ensure that default routing is disabled on startup */ 431 rio_write_config_32(rdev, 432 RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE); 433 } 434 435 spin_unlock(&rdev->rswitch->lock); 436 437 /* Create device-specific sysfs attributes */ 438 idtg2_sysfs(rdev, true); 439 440 return 0; 441 } 442 443 static void idtg2_remove(struct rio_dev *rdev) 444 { 445 pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); 446 spin_lock(&rdev->rswitch->lock); 447 if (rdev->rswitch->ops != &idtg2_switch_ops) { 448 spin_unlock(&rdev->rswitch->lock); 449 return; 450 } 451 rdev->rswitch->ops = NULL; 452 spin_unlock(&rdev->rswitch->lock); 453 /* Remove device-specific sysfs attributes */ 454 idtg2_sysfs(rdev, false); 455 } 456 457 static const struct rio_device_id idtg2_id_table[] = { 458 {RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)}, 459 {RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)}, 460 {RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)}, 461 {RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)}, 462 {RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)}, 463 { 0, } /* terminate list */ 464 }; 465 466 static struct rio_driver idtg2_driver = { 467 .name = "idt_gen2", 468 .id_table = idtg2_id_table, 469 .probe = idtg2_probe, 470 .remove = idtg2_remove, 471 }; 472 473 static int __init idtg2_init(void) 474 { 475 return rio_register_driver(&idtg2_driver); 476 } 477 478 static void __exit idtg2_exit(void) 479 { 480 pr_debug("RIO: %s\n", __func__); 481 rio_unregister_driver(&idtg2_driver); 482 pr_debug("RIO: %s done\n", __func__); 483 } 484 485 device_initcall(idtg2_init); 486 module_exit(idtg2_exit); 487 488 MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver"); 489 MODULE_AUTHOR("Integrated Device Technology, Inc."); 490 MODULE_LICENSE("GPL"); 491