xref: /linux/drivers/rapidio/devices/tsi721.c (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
4  *
5  * Copyright 2011 Integrated Device Technology, Inc.
6  * Alexandre Bounine <alexandre.bounine@idt.com>
7  * Chul Kim <chul.kim@idt.com>
8  */
9 
10 #include <linux/io.h>
11 #include <linux/errno.h>
12 #include <linux/init.h>
13 #include <linux/ioport.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/pci.h>
17 #include <linux/rio.h>
18 #include <linux/rio_drv.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/interrupt.h>
21 #include <linux/kfifo.h>
22 #include <linux/delay.h>
23 
24 #include "tsi721.h"
25 
26 #ifdef DEBUG
27 u32 tsi_dbg_level;
28 module_param_named(dbg_level, tsi_dbg_level, uint, S_IWUSR | S_IRUGO);
29 MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)");
30 #endif
31 
32 static int pcie_mrrs = -1;
33 module_param(pcie_mrrs, int, S_IRUGO);
34 MODULE_PARM_DESC(pcie_mrrs, "PCIe MRRS override value (0...5)");
35 
36 static u8 mbox_sel = 0x0f;
37 module_param(mbox_sel, byte, S_IRUGO);
38 MODULE_PARM_DESC(mbox_sel,
39 		 "RIO Messaging MBOX Selection Mask (default: 0x0f = all)");
40 
41 static DEFINE_SPINLOCK(tsi721_maint_lock);
42 
43 static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
44 static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
45 
46 /**
47  * tsi721_lcread - read from local SREP config space
48  * @mport: RapidIO master port info
49  * @index: ID of RapdiIO interface
50  * @offset: Offset into configuration space
51  * @len: Length (in bytes) of the maintenance transaction
52  * @data: Value to be read into
53  *
54  * Generates a local SREP space read.
55  *
56  * Returns: %0 on success or %-EINVAL on failure.
57  */
58 static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
59 			 int len, u32 *data)
60 {
61 	struct tsi721_device *priv = mport->priv;
62 
63 	if (len != sizeof(u32))
64 		return -EINVAL; /* only 32-bit access is supported */
65 
66 	*data = ioread32(priv->regs + offset);
67 
68 	return 0;
69 }
70 
71 /**
72  * tsi721_lcwrite - write into local SREP config space
73  * @mport: RapidIO master port info
74  * @index: ID of RapdiIO interface
75  * @offset: Offset into configuration space
76  * @len: Length (in bytes) of the maintenance transaction
77  * @data: Value to be written
78  *
79  * Generates a local write into SREP configuration space.
80  *
81  * Returns: %0 on success or %-EINVAL on failure.
82  */
83 static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
84 			  int len, u32 data)
85 {
86 	struct tsi721_device *priv = mport->priv;
87 
88 	if (len != sizeof(u32))
89 		return -EINVAL; /* only 32-bit access is supported */
90 
91 	iowrite32(data, priv->regs + offset);
92 
93 	return 0;
94 }
95 
96 /**
97  * tsi721_maint_dma - Helper function to generate RapidIO maintenance
98  *                    transactions using designated Tsi721 DMA channel.
99  * @priv: pointer to tsi721 private data
100  * @sys_size: RapdiIO transport system size
101  * @destid: Destination ID of transaction
102  * @hopcount: Number of hops to target device
103  * @offset: Offset into configuration space
104  * @len: Length (in bytes) of the maintenance transaction
105  * @data: Location to be read from or write into
106  * @do_wr: Operation flag (1 == MAINT_WR)
107  *
108  * Generates a RapidIO maintenance transaction (Read or Write).
109  * Returns: %0 on success and %-EINVAL or %-EFAULT on failure.
110  */
111 static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
112 			u16 destid, u8 hopcount, u32 offset, int len,
113 			u32 *data, int do_wr)
114 {
115 	void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id);
116 	struct tsi721_dma_desc *bd_ptr;
117 	u32 rd_count, swr_ptr, ch_stat;
118 	unsigned long flags;
119 	int i, err = 0;
120 	u32 op = do_wr ? MAINT_WR : MAINT_RD;
121 
122 	if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
123 		return -EINVAL;
124 
125 	spin_lock_irqsave(&tsi721_maint_lock, flags);
126 
127 	bd_ptr = priv->mdma.bd_base;
128 
129 	rd_count = ioread32(regs + TSI721_DMAC_DRDCNT);
130 
131 	/* Initialize DMA descriptor */
132 	bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
133 	bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
134 	bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
135 	bd_ptr[0].raddr_hi = 0;
136 	if (do_wr)
137 		bd_ptr[0].data[0] = cpu_to_be32p(data);
138 	else
139 		bd_ptr[0].data[0] = 0xffffffff;
140 
141 	mb();
142 
143 	/* Start DMA operation */
144 	iowrite32(rd_count + 2,	regs + TSI721_DMAC_DWRCNT);
145 	ioread32(regs + TSI721_DMAC_DWRCNT);
146 	i = 0;
147 
148 	/* Wait until DMA transfer is finished */
149 	while ((ch_stat = ioread32(regs + TSI721_DMAC_STS))
150 							& TSI721_DMAC_STS_RUN) {
151 		udelay(1);
152 		if (++i >= 5000000) {
153 			tsi_debug(MAINT, &priv->pdev->dev,
154 				"DMA[%d] read timeout ch_status=%x",
155 				priv->mdma.ch_id, ch_stat);
156 			if (!do_wr)
157 				*data = 0xffffffff;
158 			err = -EIO;
159 			goto err_out;
160 		}
161 	}
162 
163 	if (ch_stat & TSI721_DMAC_STS_ABORT) {
164 		/* If DMA operation aborted due to error,
165 		 * reinitialize DMA channel
166 		 */
167 		tsi_debug(MAINT, &priv->pdev->dev, "DMA ABORT ch_stat=%x",
168 			  ch_stat);
169 		tsi_debug(MAINT, &priv->pdev->dev,
170 			  "OP=%d : destid=%x hc=%x off=%x",
171 			  do_wr ? MAINT_WR : MAINT_RD,
172 			  destid, hopcount, offset);
173 		iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
174 		iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
175 		udelay(10);
176 		iowrite32(0, regs + TSI721_DMAC_DWRCNT);
177 		udelay(1);
178 		if (!do_wr)
179 			*data = 0xffffffff;
180 		err = -EIO;
181 		goto err_out;
182 	}
183 
184 	if (!do_wr)
185 		*data = be32_to_cpu(bd_ptr[0].data[0]);
186 
187 	/*
188 	 * Update descriptor status FIFO RD pointer.
189 	 * NOTE: Skipping check and clear FIFO entries because we are waiting
190 	 * for transfer to be completed.
191 	 */
192 	swr_ptr = ioread32(regs + TSI721_DMAC_DSWP);
193 	iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP);
194 
195 err_out:
196 	spin_unlock_irqrestore(&tsi721_maint_lock, flags);
197 
198 	return err;
199 }
200 
201 /**
202  * tsi721_cread_dma - Generate a RapidIO maintenance read transaction
203  *                    using Tsi721 BDMA engine.
204  * @mport: RapidIO master port control structure
205  * @index: ID of RapdiIO interface
206  * @destid: Destination ID of transaction
207  * @hopcount: Number of hops to target device
208  * @offset: Offset into configuration space
209  * @len: Length (in bytes) of the maintenance transaction
210  * @data: Location to be read into
211  *
212  * Generates a RapidIO maintenance read transaction.
213  * Returns: %0 on success and %-EINVAL or %-EFAULT on failure.
214  */
215 static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
216 			u8 hopcount, u32 offset, int len, u32 *data)
217 {
218 	struct tsi721_device *priv = mport->priv;
219 
220 	return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
221 				offset, len, data, 0);
222 }
223 
224 /**
225  * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
226  *                     using Tsi721 BDMA engine
227  * @mport: RapidIO master port control structure
228  * @index: ID of RapdiIO interface
229  * @destid: Destination ID of transaction
230  * @hopcount: Number of hops to target device
231  * @offset: Offset into configuration space
232  * @len: Length (in bytes) of the maintenance transaction
233  * @data: Value to be written
234  *
235  * Generates a RapidIO maintenance write transaction.
236  * Returns: %0 on success and %-EINVAL or %-EFAULT on failure.
237  */
238 static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
239 			 u8 hopcount, u32 offset, int len, u32 data)
240 {
241 	struct tsi721_device *priv = mport->priv;
242 	u32 temp = data;
243 
244 	return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
245 				offset, len, &temp, 1);
246 }
247 
248 /**
249  * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
250  * @priv:  tsi721 device private structure
251  *
252  * Handles inbound port-write interrupts. Copies PW message from an internal
253  * buffer into PW message FIFO and schedules deferred routine to process
254  * queued messages.
255  *
256  * Returns: %0
257  */
258 static int
259 tsi721_pw_handler(struct tsi721_device *priv)
260 {
261 	u32 pw_stat;
262 	u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
263 
264 
265 	pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
266 
267 	if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
268 		pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
269 		pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
270 		pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
271 		pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
272 
273 		/* Queue PW message (if there is room in FIFO),
274 		 * otherwise discard it.
275 		 */
276 		spin_lock(&priv->pw_fifo_lock);
277 		if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
278 			kfifo_in(&priv->pw_fifo, pw_buf,
279 						TSI721_RIO_PW_MSG_SIZE);
280 		else
281 			priv->pw_discard_count++;
282 		spin_unlock(&priv->pw_fifo_lock);
283 	}
284 
285 	/* Clear pending PW interrupts */
286 	iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
287 		  priv->regs + TSI721_RIO_PW_RX_STAT);
288 
289 	schedule_work(&priv->pw_work);
290 
291 	return 0;
292 }
293 
294 static void tsi721_pw_dpc(struct work_struct *work)
295 {
296 	struct tsi721_device *priv = container_of(work, struct tsi721_device,
297 						    pw_work);
298 	union rio_pw_msg pwmsg;
299 
300 	/*
301 	 * Process port-write messages
302 	 */
303 	while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)&pwmsg,
304 			 TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
305 		/* Pass the port-write message to RIO core for processing */
306 		rio_inb_pwrite_handler(&priv->mport, &pwmsg);
307 	}
308 }
309 
310 /**
311  * tsi721_pw_enable - enable/disable port-write interface init
312  * @mport: Master port implementing the port write unit
313  * @enable:    1=enable; 0=disable port-write message handling
314  *
315  * Returns: %0
316  */
317 static int tsi721_pw_enable(struct rio_mport *mport, int enable)
318 {
319 	struct tsi721_device *priv = mport->priv;
320 	u32 rval;
321 
322 	rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
323 
324 	if (enable)
325 		rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
326 	else
327 		rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
328 
329 	/* Clear pending PW interrupts */
330 	iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
331 		  priv->regs + TSI721_RIO_PW_RX_STAT);
332 	/* Update enable bits */
333 	iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
334 
335 	return 0;
336 }
337 
338 /**
339  * tsi721_dsend - Send a RapidIO doorbell
340  * @mport: RapidIO master port info
341  * @index: ID of RapidIO interface
342  * @destid: Destination ID of target device
343  * @data: 16-bit info field of RapidIO doorbell
344  *
345  * Sends a RapidIO doorbell message.
346  *
347  * Returns: %0
348  */
349 static int tsi721_dsend(struct rio_mport *mport, int index,
350 			u16 destid, u16 data)
351 {
352 	struct tsi721_device *priv = mport->priv;
353 	u32 offset;
354 
355 	offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
356 		 (destid << 2);
357 
358 	tsi_debug(DBELL, &priv->pdev->dev,
359 		  "Send Doorbell 0x%04x to destID 0x%x", data, destid);
360 	iowrite16be(data, priv->odb_base + offset);
361 
362 	return 0;
363 }
364 
365 /**
366  * tsi721_dbell_handler - Tsi721 doorbell interrupt handler
367  * @priv: tsi721 device-specific data structure
368  *
369  * Handles inbound doorbell interrupts. Copies doorbell entry from an internal
370  * buffer into DB message FIFO and schedules deferred  routine to process
371  * queued DBs.
372  *
373  * Returns: %0
374  */
375 static int
376 tsi721_dbell_handler(struct tsi721_device *priv)
377 {
378 	u32 regval;
379 
380 	/* Disable IDB interrupts */
381 	regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
382 	regval &= ~TSI721_SR_CHINT_IDBQRCV;
383 	iowrite32(regval,
384 		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
385 
386 	schedule_work(&priv->idb_work);
387 
388 	return 0;
389 }
390 
391 static void tsi721_db_dpc(struct work_struct *work)
392 {
393 	struct tsi721_device *priv = container_of(work, struct tsi721_device,
394 						    idb_work);
395 	struct rio_mport *mport;
396 	struct rio_dbell *dbell;
397 	int found = 0;
398 	u32 wr_ptr, rd_ptr;
399 	u64 *idb_entry;
400 	u32 regval;
401 	union {
402 		u64 msg;
403 		u8  bytes[8];
404 	} idb;
405 
406 	/*
407 	 * Process queued inbound doorbells
408 	 */
409 	mport = &priv->mport;
410 
411 	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
412 	rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE;
413 
414 	while (wr_ptr != rd_ptr) {
415 		idb_entry = (u64 *)(priv->idb_base +
416 					(TSI721_IDB_ENTRY_SIZE * rd_ptr));
417 		rd_ptr++;
418 		rd_ptr %= IDB_QSIZE;
419 		idb.msg = *idb_entry;
420 		*idb_entry = 0;
421 
422 		/* Process one doorbell */
423 		list_for_each_entry(dbell, &mport->dbells, node) {
424 			if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
425 			    (dbell->res->end >= DBELL_INF(idb.bytes))) {
426 				found = 1;
427 				break;
428 			}
429 		}
430 
431 		if (found) {
432 			dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
433 				    DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
434 		} else {
435 			tsi_debug(DBELL, &priv->pdev->dev,
436 				  "spurious IDB sid %2.2x tid %2.2x info %4.4x",
437 				  DBELL_SID(idb.bytes), DBELL_TID(idb.bytes),
438 				  DBELL_INF(idb.bytes));
439 		}
440 
441 		wr_ptr = ioread32(priv->regs +
442 				  TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
443 	}
444 
445 	iowrite32(rd_ptr & (IDB_QSIZE - 1),
446 		priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
447 
448 	/* Re-enable IDB interrupts */
449 	regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
450 	regval |= TSI721_SR_CHINT_IDBQRCV;
451 	iowrite32(regval,
452 		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
453 
454 	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
455 	if (wr_ptr != rd_ptr)
456 		schedule_work(&priv->idb_work);
457 }
458 
459 /**
460  * tsi721_irqhandler - Tsi721 interrupt handler
461  * @irq: Linux interrupt number
462  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
463  *
464  * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
465  * interrupt events and calls an event-specific handler(s).
466  *
467  * Returns: %IRQ_HANDLED or %IRQ_NONE
468  */
469 static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
470 {
471 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
472 	u32 dev_int;
473 	u32 dev_ch_int;
474 	u32 intval;
475 	u32 ch_inte;
476 
477 	/* For MSI mode disable all device-level interrupts */
478 	if (priv->flags & TSI721_USING_MSI)
479 		iowrite32(0, priv->regs + TSI721_DEV_INTE);
480 
481 	dev_int = ioread32(priv->regs + TSI721_DEV_INT);
482 	if (!dev_int)
483 		return IRQ_NONE;
484 
485 	dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
486 
487 	if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
488 		/* Service SR2PC Channel interrupts */
489 		if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
490 			/* Service Inbound Doorbell interrupt */
491 			intval = ioread32(priv->regs +
492 						TSI721_SR_CHINT(IDB_QUEUE));
493 			if (intval & TSI721_SR_CHINT_IDBQRCV)
494 				tsi721_dbell_handler(priv);
495 			else
496 				tsi_info(&priv->pdev->dev,
497 					"Unsupported SR_CH_INT %x", intval);
498 
499 			/* Clear interrupts */
500 			iowrite32(intval,
501 				priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
502 			ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
503 		}
504 	}
505 
506 	if (dev_int & TSI721_DEV_INT_SMSG_CH) {
507 		int ch;
508 
509 		/*
510 		 * Service channel interrupts from Messaging Engine
511 		 */
512 
513 		if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
514 			/* Disable signaled OB MSG Channel interrupts */
515 			ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
516 			ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
517 			iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
518 
519 			/*
520 			 * Process Inbound Message interrupt for each MBOX
521 			 */
522 			for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
523 				if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
524 					continue;
525 				tsi721_imsg_handler(priv, ch);
526 			}
527 		}
528 
529 		if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
530 			/* Disable signaled OB MSG Channel interrupts */
531 			ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
532 			ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
533 			iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
534 
535 			/*
536 			 * Process Outbound Message interrupts for each MBOX
537 			 */
538 
539 			for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
540 				if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
541 					continue;
542 				tsi721_omsg_handler(priv, ch);
543 			}
544 		}
545 	}
546 
547 	if (dev_int & TSI721_DEV_INT_SRIO) {
548 		/* Service SRIO MAC interrupts */
549 		intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
550 		if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
551 			tsi721_pw_handler(priv);
552 	}
553 
554 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
555 	if (dev_int & TSI721_DEV_INT_BDMA_CH) {
556 		int ch;
557 
558 		if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) {
559 			tsi_debug(DMA, &priv->pdev->dev,
560 				  "IRQ from DMA channel 0x%08x", dev_ch_int);
561 
562 			for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) {
563 				if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch)))
564 					continue;
565 				tsi721_bdma_handler(&priv->bdma[ch]);
566 			}
567 		}
568 	}
569 #endif
570 
571 	/* For MSI mode re-enable device-level interrupts */
572 	if (priv->flags & TSI721_USING_MSI) {
573 		dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
574 			TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
575 		iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
576 	}
577 
578 	return IRQ_HANDLED;
579 }
580 
581 static void tsi721_interrupts_init(struct tsi721_device *priv)
582 {
583 	u32 intr;
584 
585 	/* Enable IDB interrupts */
586 	iowrite32(TSI721_SR_CHINT_ALL,
587 		priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
588 	iowrite32(TSI721_SR_CHINT_IDBQRCV,
589 		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
590 
591 	/* Enable SRIO MAC interrupts */
592 	iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
593 		priv->regs + TSI721_RIO_EM_DEV_INT_EN);
594 
595 	/* Enable interrupts from channels in use */
596 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
597 	intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) |
598 		(TSI721_INT_BDMA_CHAN_M &
599 		 ~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT));
600 #else
601 	intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE);
602 #endif
603 	iowrite32(intr,	priv->regs + TSI721_DEV_CHAN_INTE);
604 
605 	if (priv->flags & TSI721_USING_MSIX)
606 		intr = TSI721_DEV_INT_SRIO;
607 	else
608 		intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
609 			TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
610 
611 	iowrite32(intr, priv->regs + TSI721_DEV_INTE);
612 	ioread32(priv->regs + TSI721_DEV_INTE);
613 }
614 
615 #ifdef CONFIG_PCI_MSI
616 /**
617  * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
618  * @irq: Linux interrupt number
619  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
620  *
621  * Handles outbound messaging interrupts signaled using MSI-X.
622  *
623  * Returns: %IRQ_HANDLED
624  */
625 static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
626 {
627 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
628 	int mbox;
629 
630 	mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
631 	tsi721_omsg_handler(priv, mbox);
632 	return IRQ_HANDLED;
633 }
634 
635 /**
636  * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
637  * @irq: Linux interrupt number
638  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
639  *
640  * Handles inbound messaging interrupts signaled using MSI-X.
641  *
642  * Returns: %IRQ_HANDLED
643  */
644 static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
645 {
646 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
647 	int mbox;
648 
649 	mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
650 	tsi721_imsg_handler(priv, mbox + 4);
651 	return IRQ_HANDLED;
652 }
653 
654 /**
655  * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
656  * @irq: Linux interrupt number
657  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
658  *
659  * Handles Tsi721 interrupts from SRIO MAC.
660  *
661  * Returns: %IRQ_HANDLED
662  */
663 static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
664 {
665 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
666 	u32 srio_int;
667 
668 	/* Service SRIO MAC interrupts */
669 	srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
670 	if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
671 		tsi721_pw_handler(priv);
672 
673 	return IRQ_HANDLED;
674 }
675 
676 /**
677  * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
678  * @irq: Linux interrupt number
679  * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
680  *
681  * Handles Tsi721 interrupts from SR2PC Channel.
682  * NOTE: At this moment services only one SR2PC channel associated with inbound
683  * doorbells.
684  *
685  * Returns: %IRQ_HANDLED
686  */
687 static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
688 {
689 	struct tsi721_device *priv = (struct tsi721_device *)ptr;
690 	u32 sr_ch_int;
691 
692 	/* Service Inbound DB interrupt from SR2PC channel */
693 	sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
694 	if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
695 		tsi721_dbell_handler(priv);
696 
697 	/* Clear interrupts */
698 	iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
699 	/* Read back to ensure that interrupt was cleared */
700 	sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
701 
702 	return IRQ_HANDLED;
703 }
704 
705 /**
706  * tsi721_request_msix - register interrupt service for MSI-X mode.
707  * @priv: tsi721 device-specific data structure
708  *
709  * Registers MSI-X interrupt service routines for interrupts that are active
710  * immediately after mport initialization. Messaging interrupt service routines
711  * should be registered during corresponding open requests.
712  *
713  * Returns: %0 on success or -errno value on failure.
714  */
715 static int tsi721_request_msix(struct tsi721_device *priv)
716 {
717 	int err = 0;
718 
719 	err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
720 			tsi721_sr2pc_ch_msix, 0,
721 			priv->msix[TSI721_VECT_IDB].irq_name, (void *)priv);
722 	if (err)
723 		return err;
724 
725 	err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
726 			tsi721_srio_msix, 0,
727 			priv->msix[TSI721_VECT_PWRX].irq_name, (void *)priv);
728 	if (err) {
729 		free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
730 		return err;
731 	}
732 
733 	return 0;
734 }
735 
736 /**
737  * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
738  * @priv: pointer to tsi721 private data
739  *
740  * Configures MSI-X support for Tsi721. Supports only an exact number
741  * of requested vectors.
742  *
743  * Returns: %0 on success or -errno value on failure.
744  */
745 static int tsi721_enable_msix(struct tsi721_device *priv)
746 {
747 	struct msix_entry entries[TSI721_VECT_MAX];
748 	int err;
749 	int i;
750 
751 	entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
752 	entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
753 
754 	/*
755 	 * Initialize MSI-X entries for Messaging Engine:
756 	 * this driver supports four RIO mailboxes (inbound and outbound)
757 	 * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
758 	 * offset +4 is added to IB MBOX number.
759 	 */
760 	for (i = 0; i < RIO_MAX_MBOX; i++) {
761 		entries[TSI721_VECT_IMB0_RCV + i].entry =
762 					TSI721_MSIX_IMSG_DQ_RCV(i + 4);
763 		entries[TSI721_VECT_IMB0_INT + i].entry =
764 					TSI721_MSIX_IMSG_INT(i + 4);
765 		entries[TSI721_VECT_OMB0_DONE + i].entry =
766 					TSI721_MSIX_OMSG_DONE(i);
767 		entries[TSI721_VECT_OMB0_INT + i].entry =
768 					TSI721_MSIX_OMSG_INT(i);
769 	}
770 
771 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
772 	/*
773 	 * Initialize MSI-X entries for Block DMA Engine:
774 	 * this driver supports XXX DMA channels
775 	 * (one is reserved for SRIO maintenance transactions)
776 	 */
777 	for (i = 0; i < TSI721_DMA_CHNUM; i++) {
778 		entries[TSI721_VECT_DMA0_DONE + i].entry =
779 					TSI721_MSIX_DMACH_DONE(i);
780 		entries[TSI721_VECT_DMA0_INT + i].entry =
781 					TSI721_MSIX_DMACH_INT(i);
782 	}
783 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
784 
785 	err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries));
786 	if (err) {
787 		tsi_err(&priv->pdev->dev,
788 			"Failed to enable MSI-X (err=%d)", err);
789 		return err;
790 	}
791 
792 	/*
793 	 * Copy MSI-X vector information into tsi721 private structure
794 	 */
795 	priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
796 	snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
797 		 DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
798 	priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
799 	snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
800 		 DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
801 
802 	for (i = 0; i < RIO_MAX_MBOX; i++) {
803 		priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
804 				entries[TSI721_VECT_IMB0_RCV + i].vector;
805 		snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
806 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
807 			 i, pci_name(priv->pdev));
808 
809 		priv->msix[TSI721_VECT_IMB0_INT + i].vector =
810 				entries[TSI721_VECT_IMB0_INT + i].vector;
811 		snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
812 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
813 			 i, pci_name(priv->pdev));
814 
815 		priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
816 				entries[TSI721_VECT_OMB0_DONE + i].vector;
817 		snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
818 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
819 			 i, pci_name(priv->pdev));
820 
821 		priv->msix[TSI721_VECT_OMB0_INT + i].vector =
822 				entries[TSI721_VECT_OMB0_INT + i].vector;
823 		snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
824 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
825 			 i, pci_name(priv->pdev));
826 	}
827 
828 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
829 	for (i = 0; i < TSI721_DMA_CHNUM; i++) {
830 		priv->msix[TSI721_VECT_DMA0_DONE + i].vector =
831 				entries[TSI721_VECT_DMA0_DONE + i].vector;
832 		snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name,
833 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s",
834 			 i, pci_name(priv->pdev));
835 
836 		priv->msix[TSI721_VECT_DMA0_INT + i].vector =
837 				entries[TSI721_VECT_DMA0_INT + i].vector;
838 		snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name,
839 			 IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s",
840 			 i, pci_name(priv->pdev));
841 	}
842 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
843 
844 	return 0;
845 }
846 #endif /* CONFIG_PCI_MSI */
847 
848 static int tsi721_request_irq(struct tsi721_device *priv)
849 {
850 	int err;
851 
852 #ifdef CONFIG_PCI_MSI
853 	if (priv->flags & TSI721_USING_MSIX)
854 		err = tsi721_request_msix(priv);
855 	else
856 #endif
857 		err = request_irq(priv->pdev->irq, tsi721_irqhandler,
858 			  (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
859 			  DRV_NAME, (void *)priv);
860 
861 	if (err)
862 		tsi_err(&priv->pdev->dev,
863 			"Unable to allocate interrupt, err=%d", err);
864 
865 	return err;
866 }
867 
868 static void tsi721_free_irq(struct tsi721_device *priv)
869 {
870 #ifdef CONFIG_PCI_MSI
871 	if (priv->flags & TSI721_USING_MSIX) {
872 		free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
873 		free_irq(priv->msix[TSI721_VECT_PWRX].vector, (void *)priv);
874 	} else
875 #endif
876 	free_irq(priv->pdev->irq, (void *)priv);
877 }
878 
879 static int
880 tsi721_obw_alloc(struct tsi721_device *priv, struct tsi721_obw_bar *pbar,
881 		 u32 size, int *win_id)
882 {
883 	u64 win_base;
884 	u64 bar_base;
885 	u64 bar_end;
886 	u32 align;
887 	struct tsi721_ob_win *win;
888 	struct tsi721_ob_win *new_win = NULL;
889 	int new_win_idx = -1;
890 	int i = 0;
891 
892 	bar_base = pbar->base;
893 	bar_end =  bar_base + pbar->size;
894 	win_base = bar_base;
895 	align = size/TSI721_PC2SR_ZONES;
896 
897 	while (i < TSI721_IBWIN_NUM) {
898 		for (i = 0; i < TSI721_IBWIN_NUM; i++) {
899 			if (!priv->ob_win[i].active) {
900 				if (new_win == NULL) {
901 					new_win = &priv->ob_win[i];
902 					new_win_idx = i;
903 				}
904 				continue;
905 			}
906 
907 			/*
908 			 * If this window belongs to the current BAR check it
909 			 * for overlap
910 			 */
911 			win = &priv->ob_win[i];
912 
913 			if (win->base >= bar_base && win->base < bar_end) {
914 				if (win_base < (win->base + win->size) &&
915 						(win_base + size) > win->base) {
916 					/* Overlap detected */
917 					win_base = win->base + win->size;
918 					win_base = ALIGN(win_base, align);
919 					break;
920 				}
921 			}
922 		}
923 	}
924 
925 	if (win_base + size > bar_end)
926 		return -ENOMEM;
927 
928 	if (!new_win) {
929 		tsi_err(&priv->pdev->dev, "OBW count tracking failed");
930 		return -EIO;
931 	}
932 
933 	new_win->active = true;
934 	new_win->base = win_base;
935 	new_win->size = size;
936 	new_win->pbar = pbar;
937 	priv->obwin_cnt--;
938 	pbar->free -= size;
939 	*win_id = new_win_idx;
940 	return 0;
941 }
942 
943 static int tsi721_map_outb_win(struct rio_mport *mport, u16 destid, u64 rstart,
944 			u32 size, u32 flags, dma_addr_t *laddr)
945 {
946 	struct tsi721_device *priv = mport->priv;
947 	int i;
948 	struct tsi721_obw_bar *pbar;
949 	struct tsi721_ob_win *ob_win;
950 	int obw = -1;
951 	u32 rval;
952 	u64 rio_addr;
953 	u32 zsize;
954 	int ret = -ENOMEM;
955 
956 	tsi_debug(OBW, &priv->pdev->dev,
957 		  "did=%d ra=0x%llx sz=0x%x", destid, rstart, size);
958 
959 	if (!is_power_of_2(size) || (size < 0x8000) || (rstart & (size - 1)))
960 		return -EINVAL;
961 
962 	if (priv->obwin_cnt == 0)
963 		return -EBUSY;
964 
965 	for (i = 0; i < 2; i++) {
966 		if (priv->p2r_bar[i].free >= size) {
967 			pbar = &priv->p2r_bar[i];
968 			ret = tsi721_obw_alloc(priv, pbar, size, &obw);
969 			if (!ret)
970 				break;
971 		}
972 	}
973 
974 	if (ret)
975 		return ret;
976 
977 	WARN_ON(obw == -1);
978 	ob_win = &priv->ob_win[obw];
979 	ob_win->destid = destid;
980 	ob_win->rstart = rstart;
981 	tsi_debug(OBW, &priv->pdev->dev,
982 		  "allocated OBW%d @%llx", obw, ob_win->base);
983 
984 	/*
985 	 * Configure Outbound Window
986 	 */
987 
988 	zsize = size/TSI721_PC2SR_ZONES;
989 	rio_addr = rstart;
990 
991 	/*
992 	 * Program Address Translation Zones:
993 	 *  This implementation uses all 8 zones associated wit window.
994 	 */
995 	for (i = 0; i < TSI721_PC2SR_ZONES; i++) {
996 
997 		while (ioread32(priv->regs + TSI721_ZONE_SEL) &
998 			TSI721_ZONE_SEL_GO) {
999 			udelay(1);
1000 		}
1001 
1002 		rval = (u32)(rio_addr & TSI721_LUT_DATA0_ADD) |
1003 			TSI721_LUT_DATA0_NREAD | TSI721_LUT_DATA0_NWR;
1004 		iowrite32(rval, priv->regs + TSI721_LUT_DATA0);
1005 		rval = (u32)(rio_addr >> 32);
1006 		iowrite32(rval, priv->regs + TSI721_LUT_DATA1);
1007 		rval = destid;
1008 		iowrite32(rval, priv->regs + TSI721_LUT_DATA2);
1009 
1010 		rval = TSI721_ZONE_SEL_GO | (obw << 3) | i;
1011 		iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
1012 
1013 		rio_addr += zsize;
1014 	}
1015 
1016 	iowrite32(TSI721_OBWIN_SIZE(size) << 8,
1017 		  priv->regs + TSI721_OBWINSZ(obw));
1018 	iowrite32((u32)(ob_win->base >> 32), priv->regs + TSI721_OBWINUB(obw));
1019 	iowrite32((u32)(ob_win->base & TSI721_OBWINLB_BA) | TSI721_OBWINLB_WEN,
1020 		  priv->regs + TSI721_OBWINLB(obw));
1021 
1022 	*laddr = ob_win->base;
1023 	return 0;
1024 }
1025 
1026 static void tsi721_unmap_outb_win(struct rio_mport *mport,
1027 				  u16 destid, u64 rstart)
1028 {
1029 	struct tsi721_device *priv = mport->priv;
1030 	struct tsi721_ob_win *ob_win;
1031 	int i;
1032 
1033 	tsi_debug(OBW, &priv->pdev->dev, "did=%d ra=0x%llx", destid, rstart);
1034 
1035 	for (i = 0; i < TSI721_OBWIN_NUM; i++) {
1036 		ob_win = &priv->ob_win[i];
1037 
1038 		if (ob_win->active &&
1039 		    ob_win->destid == destid && ob_win->rstart == rstart) {
1040 			tsi_debug(OBW, &priv->pdev->dev,
1041 				  "free OBW%d @%llx", i, ob_win->base);
1042 			ob_win->active = false;
1043 			iowrite32(0, priv->regs + TSI721_OBWINLB(i));
1044 			ob_win->pbar->free += ob_win->size;
1045 			priv->obwin_cnt++;
1046 			break;
1047 		}
1048 	}
1049 }
1050 
1051 /**
1052  * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
1053  * translation regions.
1054  * @priv: pointer to tsi721 private data
1055  *
1056  * Disables SREP translation regions.
1057  */
1058 static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
1059 {
1060 	int i, z;
1061 	u32 rval;
1062 
1063 	/* Disable all PC2SR translation windows */
1064 	for (i = 0; i < TSI721_OBWIN_NUM; i++)
1065 		iowrite32(0, priv->regs + TSI721_OBWINLB(i));
1066 
1067 	/* Initialize zone lookup tables to avoid ECC errors on reads */
1068 	iowrite32(0, priv->regs + TSI721_LUT_DATA0);
1069 	iowrite32(0, priv->regs + TSI721_LUT_DATA1);
1070 	iowrite32(0, priv->regs + TSI721_LUT_DATA2);
1071 
1072 	for (i = 0; i < TSI721_OBWIN_NUM; i++) {
1073 		for (z = 0; z < TSI721_PC2SR_ZONES; z++) {
1074 			while (ioread32(priv->regs + TSI721_ZONE_SEL) &
1075 				TSI721_ZONE_SEL_GO) {
1076 				udelay(1);
1077 			}
1078 			rval = TSI721_ZONE_SEL_GO | (i << 3) | z;
1079 			iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
1080 		}
1081 	}
1082 
1083 	if (priv->p2r_bar[0].size == 0 && priv->p2r_bar[1].size == 0) {
1084 		priv->obwin_cnt = 0;
1085 		return;
1086 	}
1087 
1088 	priv->p2r_bar[0].free = priv->p2r_bar[0].size;
1089 	priv->p2r_bar[1].free = priv->p2r_bar[1].size;
1090 
1091 	for (i = 0; i < TSI721_OBWIN_NUM; i++)
1092 		priv->ob_win[i].active = false;
1093 
1094 	priv->obwin_cnt = TSI721_OBWIN_NUM;
1095 }
1096 
1097 /**
1098  * tsi721_rio_map_inb_mem -- Mapping inbound memory region.
1099  * @mport: RapidIO master port
1100  * @lstart: Local memory space start address.
1101  * @rstart: RapidIO space start address.
1102  * @size: The mapping region size.
1103  * @flags: Flags for mapping. 0 for using default flags.
1104  *
1105  * Return: 0 -- Success.
1106  *
1107  * This function will create the inbound mapping
1108  * from rstart to lstart.
1109  */
1110 static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
1111 		u64 rstart, u64 size, u32 flags)
1112 {
1113 	struct tsi721_device *priv = mport->priv;
1114 	int i, avail = -1;
1115 	u32 regval;
1116 	struct tsi721_ib_win *ib_win;
1117 	bool direct = (lstart == rstart);
1118 	u64 ibw_size;
1119 	dma_addr_t loc_start;
1120 	u64 ibw_start;
1121 	struct tsi721_ib_win_mapping *map = NULL;
1122 	int ret = -EBUSY;
1123 
1124 	/* Max IBW size supported by HW is 16GB */
1125 	if (size > 0x400000000UL)
1126 		return -EINVAL;
1127 
1128 	if (direct) {
1129 		/* Calculate minimal acceptable window size and base address */
1130 
1131 		ibw_size = roundup_pow_of_two(size);
1132 		ibw_start = lstart & ~(ibw_size - 1);
1133 
1134 		tsi_debug(IBW, &priv->pdev->dev,
1135 			"Direct (RIO_0x%llx -> PCIe_%pad), size=0x%llx, ibw_start = 0x%llx",
1136 			rstart, &lstart, size, ibw_start);
1137 
1138 		while ((lstart + size) > (ibw_start + ibw_size)) {
1139 			ibw_size *= 2;
1140 			ibw_start = lstart & ~(ibw_size - 1);
1141 			/* Check for crossing IBW max size 16GB */
1142 			if (ibw_size > 0x400000000UL)
1143 				return -EBUSY;
1144 		}
1145 
1146 		loc_start = ibw_start;
1147 
1148 		map = kzalloc(sizeof(struct tsi721_ib_win_mapping), GFP_ATOMIC);
1149 		if (map == NULL)
1150 			return -ENOMEM;
1151 
1152 	} else {
1153 		tsi_debug(IBW, &priv->pdev->dev,
1154 			"Translated (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
1155 			rstart, &lstart, size);
1156 
1157 		if (!is_power_of_2(size) || size < 0x1000 ||
1158 		    ((u64)lstart & (size - 1)) || (rstart & (size - 1)))
1159 			return -EINVAL;
1160 		if (priv->ibwin_cnt == 0)
1161 			return -EBUSY;
1162 		ibw_start = rstart;
1163 		ibw_size = size;
1164 		loc_start = lstart;
1165 	}
1166 
1167 	/*
1168 	 * Scan for overlapping with active regions and mark the first available
1169 	 * IB window at the same time.
1170 	 */
1171 	for (i = 0; i < TSI721_IBWIN_NUM; i++) {
1172 		ib_win = &priv->ib_win[i];
1173 
1174 		if (!ib_win->active) {
1175 			if (avail == -1) {
1176 				avail = i;
1177 				ret = 0;
1178 			}
1179 		} else if (ibw_start < (ib_win->rstart + ib_win->size) &&
1180 			   (ibw_start + ibw_size) > ib_win->rstart) {
1181 			/* Return error if address translation involved */
1182 			if (!direct || ib_win->xlat) {
1183 				ret = -EFAULT;
1184 				break;
1185 			}
1186 
1187 			/*
1188 			 * Direct mappings usually are larger than originally
1189 			 * requested fragments - check if this new request fits
1190 			 * into it.
1191 			 */
1192 			if (rstart >= ib_win->rstart &&
1193 			    (rstart + size) <= (ib_win->rstart +
1194 							ib_win->size)) {
1195 				/* We are in - no further mapping required */
1196 				map->lstart = lstart;
1197 				list_add_tail(&map->node, &ib_win->mappings);
1198 				return 0;
1199 			}
1200 
1201 			ret = -EFAULT;
1202 			break;
1203 		}
1204 	}
1205 
1206 	if (ret)
1207 		goto out;
1208 	i = avail;
1209 
1210 	/* Sanity check: available IB window must be disabled at this point */
1211 	regval = ioread32(priv->regs + TSI721_IBWIN_LB(i));
1212 	if (WARN_ON(regval & TSI721_IBWIN_LB_WEN)) {
1213 		ret = -EIO;
1214 		goto out;
1215 	}
1216 
1217 	ib_win = &priv->ib_win[i];
1218 	ib_win->active = true;
1219 	ib_win->rstart = ibw_start;
1220 	ib_win->lstart = loc_start;
1221 	ib_win->size = ibw_size;
1222 	ib_win->xlat = (lstart != rstart);
1223 	INIT_LIST_HEAD(&ib_win->mappings);
1224 
1225 	/*
1226 	 * When using direct IBW mapping and have larger than requested IBW size
1227 	 * we can have multiple local memory blocks mapped through the same IBW
1228 	 * To handle this situation we maintain list of "clients" for such IBWs.
1229 	 */
1230 	if (direct) {
1231 		map->lstart = lstart;
1232 		list_add_tail(&map->node, &ib_win->mappings);
1233 	}
1234 
1235 	iowrite32(TSI721_IBWIN_SIZE(ibw_size) << 8,
1236 			priv->regs + TSI721_IBWIN_SZ(i));
1237 
1238 	iowrite32(((u64)loc_start >> 32), priv->regs + TSI721_IBWIN_TUA(i));
1239 	iowrite32(((u64)loc_start & TSI721_IBWIN_TLA_ADD),
1240 		  priv->regs + TSI721_IBWIN_TLA(i));
1241 
1242 	iowrite32(ibw_start >> 32, priv->regs + TSI721_IBWIN_UB(i));
1243 	iowrite32((ibw_start & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN,
1244 		priv->regs + TSI721_IBWIN_LB(i));
1245 
1246 	priv->ibwin_cnt--;
1247 
1248 	tsi_debug(IBW, &priv->pdev->dev,
1249 		"Configured IBWIN%d (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
1250 		i, ibw_start, &loc_start, ibw_size);
1251 
1252 	return 0;
1253 out:
1254 	kfree(map);
1255 	return ret;
1256 }
1257 
1258 /**
1259  * tsi721_rio_unmap_inb_mem -- Unmapping inbound memory region.
1260  * @mport: RapidIO master port
1261  * @lstart: Local memory space start address.
1262  */
1263 static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport,
1264 				dma_addr_t lstart)
1265 {
1266 	struct tsi721_device *priv = mport->priv;
1267 	struct tsi721_ib_win *ib_win;
1268 	int i;
1269 
1270 	tsi_debug(IBW, &priv->pdev->dev,
1271 		"Unmap IBW mapped to PCIe_%pad", &lstart);
1272 
1273 	/* Search for matching active inbound translation window */
1274 	for (i = 0; i < TSI721_IBWIN_NUM; i++) {
1275 		ib_win = &priv->ib_win[i];
1276 
1277 		/* Address translating IBWs must to be an exact march */
1278 		if (!ib_win->active ||
1279 		    (ib_win->xlat && lstart != ib_win->lstart))
1280 			continue;
1281 
1282 		if (lstart >= ib_win->lstart &&
1283 		    lstart < (ib_win->lstart + ib_win->size)) {
1284 
1285 			if (!ib_win->xlat) {
1286 				struct tsi721_ib_win_mapping *map;
1287 				int found = 0;
1288 
1289 				list_for_each_entry(map,
1290 						    &ib_win->mappings, node) {
1291 					if (map->lstart == lstart) {
1292 						list_del(&map->node);
1293 						kfree(map);
1294 						found = 1;
1295 						break;
1296 					}
1297 				}
1298 
1299 				if (!found)
1300 					continue;
1301 
1302 				if (!list_empty(&ib_win->mappings))
1303 					break;
1304 			}
1305 
1306 			tsi_debug(IBW, &priv->pdev->dev, "Disable IBWIN_%d", i);
1307 			iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
1308 			ib_win->active = false;
1309 			priv->ibwin_cnt++;
1310 			break;
1311 		}
1312 	}
1313 
1314 	if (i == TSI721_IBWIN_NUM)
1315 		tsi_debug(IBW, &priv->pdev->dev,
1316 			"IB window mapped to %pad not found", &lstart);
1317 }
1318 
1319 /**
1320  * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
1321  * translation regions.
1322  * @priv: pointer to tsi721 private data
1323  *
1324  * Disables inbound windows.
1325  */
1326 static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
1327 {
1328 	int i;
1329 
1330 	/* Disable all SR2PC inbound windows */
1331 	for (i = 0; i < TSI721_IBWIN_NUM; i++)
1332 		iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
1333 	priv->ibwin_cnt = TSI721_IBWIN_NUM;
1334 }
1335 
1336 /*
1337  * tsi721_close_sr2pc_mapping - closes all active inbound (SRIO->PCIe)
1338  * translation regions.
1339  * @priv: pointer to tsi721 device private data
1340  */
1341 static void tsi721_close_sr2pc_mapping(struct tsi721_device *priv)
1342 {
1343 	struct tsi721_ib_win *ib_win;
1344 	int i;
1345 
1346 	/* Disable all active SR2PC inbound windows */
1347 	for (i = 0; i < TSI721_IBWIN_NUM; i++) {
1348 		ib_win = &priv->ib_win[i];
1349 		if (ib_win->active) {
1350 			iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
1351 			ib_win->active = false;
1352 		}
1353 	}
1354 }
1355 
1356 /**
1357  * tsi721_port_write_init - Inbound port write interface init
1358  * @priv: pointer to tsi721 private data
1359  *
1360  * Initializes inbound port write handler.
1361  * Returns: %0 on success or %-ENOMEM on failure.
1362  */
1363 static int tsi721_port_write_init(struct tsi721_device *priv)
1364 {
1365 	priv->pw_discard_count = 0;
1366 	INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
1367 	spin_lock_init(&priv->pw_fifo_lock);
1368 	if (kfifo_alloc(&priv->pw_fifo,
1369 			TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
1370 		tsi_err(&priv->pdev->dev, "PW FIFO allocation failed");
1371 		return -ENOMEM;
1372 	}
1373 
1374 	/* Use reliable port-write capture mode */
1375 	iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
1376 	return 0;
1377 }
1378 
1379 static void tsi721_port_write_free(struct tsi721_device *priv)
1380 {
1381 	kfifo_free(&priv->pw_fifo);
1382 }
1383 
1384 static int tsi721_doorbell_init(struct tsi721_device *priv)
1385 {
1386 	/* Outbound Doorbells do not require any setup.
1387 	 * Tsi721 uses dedicated PCI BAR1 to generate doorbells.
1388 	 * That BAR1 was mapped during the probe routine.
1389 	 */
1390 
1391 	/* Initialize Inbound Doorbell processing DPC and queue */
1392 	priv->db_discard_count = 0;
1393 	INIT_WORK(&priv->idb_work, tsi721_db_dpc);
1394 
1395 	/* Allocate buffer for inbound doorbells queue */
1396 	priv->idb_base = dma_alloc_coherent(&priv->pdev->dev,
1397 					    IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
1398 					    &priv->idb_dma, GFP_KERNEL);
1399 	if (!priv->idb_base)
1400 		return -ENOMEM;
1401 
1402 	tsi_debug(DBELL, &priv->pdev->dev,
1403 		  "Allocated IDB buffer @ %p (phys = %pad)",
1404 		  priv->idb_base, &priv->idb_dma);
1405 
1406 	iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
1407 		priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
1408 	iowrite32(((u64)priv->idb_dma >> 32),
1409 		priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
1410 	iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
1411 		priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
1412 	/* Enable accepting all inbound doorbells */
1413 	iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
1414 
1415 	iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
1416 
1417 	iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
1418 
1419 	return 0;
1420 }
1421 
1422 static void tsi721_doorbell_free(struct tsi721_device *priv)
1423 {
1424 	if (priv->idb_base == NULL)
1425 		return;
1426 
1427 	/* Free buffer allocated for inbound doorbell queue */
1428 	dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
1429 			  priv->idb_base, priv->idb_dma);
1430 	priv->idb_base = NULL;
1431 }
1432 
1433 /**
1434  * tsi721_bdma_maint_init - Initialize maintenance request BDMA channel.
1435  * @priv: pointer to tsi721 private data
1436  *
1437  * Initialize BDMA channel allocated for RapidIO maintenance read/write
1438  * request generation
1439  *
1440  * Returns: %0 on success or %-ENOMEM on failure.
1441  */
1442 static int tsi721_bdma_maint_init(struct tsi721_device *priv)
1443 {
1444 	struct tsi721_dma_desc *bd_ptr;
1445 	u64		*sts_ptr;
1446 	dma_addr_t	bd_phys, sts_phys;
1447 	int		sts_size;
1448 	int		bd_num = 2;
1449 	void __iomem	*regs;
1450 
1451 	tsi_debug(MAINT, &priv->pdev->dev,
1452 		  "Init BDMA_%d Maintenance requests", TSI721_DMACH_MAINT);
1453 
1454 	/*
1455 	 * Initialize DMA channel for maintenance requests
1456 	 */
1457 
1458 	priv->mdma.ch_id = TSI721_DMACH_MAINT;
1459 	regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT);
1460 
1461 	/* Allocate space for DMA descriptors */
1462 	bd_ptr = dma_alloc_coherent(&priv->pdev->dev,
1463 				    bd_num * sizeof(struct tsi721_dma_desc),
1464 				    &bd_phys, GFP_KERNEL);
1465 	if (!bd_ptr)
1466 		return -ENOMEM;
1467 
1468 	priv->mdma.bd_num = bd_num;
1469 	priv->mdma.bd_phys = bd_phys;
1470 	priv->mdma.bd_base = bd_ptr;
1471 
1472 	tsi_debug(MAINT, &priv->pdev->dev, "DMA descriptors @ %p (phys = %pad)",
1473 		  bd_ptr, &bd_phys);
1474 
1475 	/* Allocate space for descriptor status FIFO */
1476 	sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
1477 					bd_num : TSI721_DMA_MINSTSSZ;
1478 	sts_size = roundup_pow_of_two(sts_size);
1479 	sts_ptr = dma_alloc_coherent(&priv->pdev->dev,
1480 				     sts_size * sizeof(struct tsi721_dma_sts),
1481 				     &sts_phys, GFP_KERNEL);
1482 	if (!sts_ptr) {
1483 		/* Free space allocated for DMA descriptors */
1484 		dma_free_coherent(&priv->pdev->dev,
1485 				  bd_num * sizeof(struct tsi721_dma_desc),
1486 				  bd_ptr, bd_phys);
1487 		priv->mdma.bd_base = NULL;
1488 		return -ENOMEM;
1489 	}
1490 
1491 	priv->mdma.sts_phys = sts_phys;
1492 	priv->mdma.sts_base = sts_ptr;
1493 	priv->mdma.sts_size = sts_size;
1494 
1495 	tsi_debug(MAINT, &priv->pdev->dev,
1496 		"desc status FIFO @ %p (phys = %pad) size=0x%x",
1497 		sts_ptr, &sts_phys, sts_size);
1498 
1499 	/* Initialize DMA descriptors ring */
1500 	bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
1501 	bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
1502 						 TSI721_DMAC_DPTRL_MASK);
1503 	bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
1504 
1505 	/* Setup DMA descriptor pointers */
1506 	iowrite32(((u64)bd_phys >> 32),	regs + TSI721_DMAC_DPTRH);
1507 	iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
1508 		regs + TSI721_DMAC_DPTRL);
1509 
1510 	/* Setup descriptor status FIFO */
1511 	iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH);
1512 	iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
1513 		regs + TSI721_DMAC_DSBL);
1514 	iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
1515 		regs + TSI721_DMAC_DSSZ);
1516 
1517 	/* Clear interrupt bits */
1518 	iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
1519 
1520 	ioread32(regs + TSI721_DMAC_INT);
1521 
1522 	/* Toggle DMA channel initialization */
1523 	iowrite32(TSI721_DMAC_CTL_INIT,	regs + TSI721_DMAC_CTL);
1524 	ioread32(regs + TSI721_DMAC_CTL);
1525 	udelay(10);
1526 
1527 	return 0;
1528 }
1529 
1530 static int tsi721_bdma_maint_free(struct tsi721_device *priv)
1531 {
1532 	u32 ch_stat;
1533 	struct tsi721_bdma_maint *mdma = &priv->mdma;
1534 	void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id);
1535 
1536 	if (mdma->bd_base == NULL)
1537 		return 0;
1538 
1539 	/* Check if DMA channel still running */
1540 	ch_stat = ioread32(regs + TSI721_DMAC_STS);
1541 	if (ch_stat & TSI721_DMAC_STS_RUN)
1542 		return -EFAULT;
1543 
1544 	/* Put DMA channel into init state */
1545 	iowrite32(TSI721_DMAC_CTL_INIT,	regs + TSI721_DMAC_CTL);
1546 
1547 	/* Free space allocated for DMA descriptors */
1548 	dma_free_coherent(&priv->pdev->dev,
1549 		mdma->bd_num * sizeof(struct tsi721_dma_desc),
1550 		mdma->bd_base, mdma->bd_phys);
1551 	mdma->bd_base = NULL;
1552 
1553 	/* Free space allocated for status FIFO */
1554 	dma_free_coherent(&priv->pdev->dev,
1555 		mdma->sts_size * sizeof(struct tsi721_dma_sts),
1556 		mdma->sts_base, mdma->sts_phys);
1557 	mdma->sts_base = NULL;
1558 	return 0;
1559 }
1560 
1561 /* Enable Inbound Messaging Interrupts */
1562 static void
1563 tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
1564 				  u32 inte_mask)
1565 {
1566 	u32 rval;
1567 
1568 	if (!inte_mask)
1569 		return;
1570 
1571 	/* Clear pending Inbound Messaging interrupts */
1572 	iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
1573 
1574 	/* Enable Inbound Messaging interrupts */
1575 	rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
1576 	iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
1577 
1578 	if (priv->flags & TSI721_USING_MSIX)
1579 		return; /* Finished if we are in MSI-X mode */
1580 
1581 	/*
1582 	 * For MSI and INTA interrupt signalling we need to enable next levels
1583 	 */
1584 
1585 	/* Enable Device Channel Interrupt */
1586 	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1587 	iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
1588 		  priv->regs + TSI721_DEV_CHAN_INTE);
1589 }
1590 
1591 /* Disable Inbound Messaging Interrupts */
1592 static void
1593 tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
1594 				   u32 inte_mask)
1595 {
1596 	u32 rval;
1597 
1598 	if (!inte_mask)
1599 		return;
1600 
1601 	/* Clear pending Inbound Messaging interrupts */
1602 	iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
1603 
1604 	/* Disable Inbound Messaging interrupts */
1605 	rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
1606 	rval &= ~inte_mask;
1607 	iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
1608 
1609 	if (priv->flags & TSI721_USING_MSIX)
1610 		return; /* Finished if we are in MSI-X mode */
1611 
1612 	/*
1613 	 * For MSI and INTA interrupt signalling we need to disable next levels
1614 	 */
1615 
1616 	/* Disable Device Channel Interrupt */
1617 	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1618 	rval &= ~TSI721_INT_IMSG_CHAN(ch);
1619 	iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
1620 }
1621 
1622 /* Enable Outbound Messaging interrupts */
1623 static void
1624 tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
1625 				  u32 inte_mask)
1626 {
1627 	u32 rval;
1628 
1629 	if (!inte_mask)
1630 		return;
1631 
1632 	/* Clear pending Outbound Messaging interrupts */
1633 	iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
1634 
1635 	/* Enable Outbound Messaging channel interrupts */
1636 	rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
1637 	iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
1638 
1639 	if (priv->flags & TSI721_USING_MSIX)
1640 		return; /* Finished if we are in MSI-X mode */
1641 
1642 	/*
1643 	 * For MSI and INTA interrupt signalling we need to enable next levels
1644 	 */
1645 
1646 	/* Enable Device Channel Interrupt */
1647 	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1648 	iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
1649 		  priv->regs + TSI721_DEV_CHAN_INTE);
1650 }
1651 
1652 /* Disable Outbound Messaging interrupts */
1653 static void
1654 tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
1655 				   u32 inte_mask)
1656 {
1657 	u32 rval;
1658 
1659 	if (!inte_mask)
1660 		return;
1661 
1662 	/* Clear pending Outbound Messaging interrupts */
1663 	iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
1664 
1665 	/* Disable Outbound Messaging interrupts */
1666 	rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
1667 	rval &= ~inte_mask;
1668 	iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
1669 
1670 	if (priv->flags & TSI721_USING_MSIX)
1671 		return; /* Finished if we are in MSI-X mode */
1672 
1673 	/*
1674 	 * For MSI and INTA interrupt signalling we need to disable next levels
1675 	 */
1676 
1677 	/* Disable Device Channel Interrupt */
1678 	rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1679 	rval &= ~TSI721_INT_OMSG_CHAN(ch);
1680 	iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
1681 }
1682 
1683 /**
1684  * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
1685  * @mport: Master port with outbound message queue
1686  * @rdev: Target of outbound message
1687  * @mbox: Outbound mailbox
1688  * @buffer: Message to add to outbound queue
1689  * @len: Length of message
1690  *
1691  * Returns: %0 on success or -errno value on failure.
1692  */
1693 static int
1694 tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
1695 			void *buffer, size_t len)
1696 {
1697 	struct tsi721_device *priv = mport->priv;
1698 	struct tsi721_omsg_desc *desc;
1699 	u32 tx_slot;
1700 	unsigned long flags;
1701 
1702 	if (!priv->omsg_init[mbox] ||
1703 	    len > TSI721_MSG_MAX_SIZE || len < 8)
1704 		return -EINVAL;
1705 
1706 	spin_lock_irqsave(&priv->omsg_ring[mbox].lock, flags);
1707 
1708 	tx_slot = priv->omsg_ring[mbox].tx_slot;
1709 
1710 	/* Copy copy message into transfer buffer */
1711 	memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
1712 
1713 	if (len & 0x7)
1714 		len += 8;
1715 
1716 	/* Build descriptor associated with buffer */
1717 	desc = priv->omsg_ring[mbox].omd_base;
1718 	desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
1719 #ifdef TSI721_OMSG_DESC_INT
1720 	/* Request IOF_DONE interrupt generation for each N-th frame in queue */
1721 	if (tx_slot % 4 == 0)
1722 		desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
1723 #endif
1724 	desc[tx_slot].msg_info =
1725 		cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
1726 			    (0xe << 12) | (len & 0xff8));
1727 	desc[tx_slot].bufptr_lo =
1728 		cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
1729 			    0xffffffff);
1730 	desc[tx_slot].bufptr_hi =
1731 		cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
1732 
1733 	priv->omsg_ring[mbox].wr_count++;
1734 
1735 	/* Go to next descriptor */
1736 	if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
1737 		priv->omsg_ring[mbox].tx_slot = 0;
1738 		/* Move through the ring link descriptor at the end */
1739 		priv->omsg_ring[mbox].wr_count++;
1740 	}
1741 
1742 	mb();
1743 
1744 	/* Set new write count value */
1745 	iowrite32(priv->omsg_ring[mbox].wr_count,
1746 		priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
1747 	ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
1748 
1749 	spin_unlock_irqrestore(&priv->omsg_ring[mbox].lock, flags);
1750 
1751 	return 0;
1752 }
1753 
1754 /**
1755  * tsi721_omsg_handler - Outbound Message Interrupt Handler
1756  * @priv: pointer to tsi721 private data
1757  * @ch:   number of OB MSG channel to service
1758  *
1759  * Services channel interrupts from outbound messaging engine.
1760  */
1761 static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
1762 {
1763 	u32 omsg_int;
1764 	struct rio_mport *mport = &priv->mport;
1765 	void *dev_id = NULL;
1766 	u32 tx_slot = 0xffffffff;
1767 	int do_callback = 0;
1768 
1769 	spin_lock(&priv->omsg_ring[ch].lock);
1770 
1771 	omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
1772 
1773 	if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
1774 		tsi_info(&priv->pdev->dev,
1775 			"OB MBOX%d: Status FIFO is full", ch);
1776 
1777 	if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
1778 		u32 srd_ptr;
1779 		u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
1780 		int i, j;
1781 
1782 		/*
1783 		 * Find last successfully processed descriptor
1784 		 */
1785 
1786 		/* Check and clear descriptor status FIFO entries */
1787 		srd_ptr = priv->omsg_ring[ch].sts_rdptr;
1788 		sts_ptr = priv->omsg_ring[ch].sts_base;
1789 		j = srd_ptr * 8;
1790 		while (sts_ptr[j]) {
1791 			for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
1792 				prev_ptr = last_ptr;
1793 				last_ptr = le64_to_cpu(sts_ptr[j]);
1794 				sts_ptr[j] = 0;
1795 			}
1796 
1797 			++srd_ptr;
1798 			srd_ptr %= priv->omsg_ring[ch].sts_size;
1799 			j = srd_ptr * 8;
1800 		}
1801 
1802 		if (last_ptr == 0)
1803 			goto no_sts_update;
1804 
1805 		priv->omsg_ring[ch].sts_rdptr = srd_ptr;
1806 		iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
1807 
1808 		if (!mport->outb_msg[ch].mcback)
1809 			goto no_sts_update;
1810 
1811 		/* Inform upper layer about transfer completion */
1812 
1813 		tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
1814 						sizeof(struct tsi721_omsg_desc);
1815 
1816 		/*
1817 		 * Check if this is a Link Descriptor (LD).
1818 		 * If yes, ignore LD and use descriptor processed
1819 		 * before LD.
1820 		 */
1821 		if (tx_slot == priv->omsg_ring[ch].size) {
1822 			if (prev_ptr)
1823 				tx_slot = (prev_ptr -
1824 					(u64)priv->omsg_ring[ch].omd_phys)/
1825 						sizeof(struct tsi721_omsg_desc);
1826 			else
1827 				goto no_sts_update;
1828 		}
1829 
1830 		if (tx_slot >= priv->omsg_ring[ch].size)
1831 			tsi_debug(OMSG, &priv->pdev->dev,
1832 				  "OB_MSG tx_slot=%x > size=%x",
1833 				  tx_slot, priv->omsg_ring[ch].size);
1834 		WARN_ON(tx_slot >= priv->omsg_ring[ch].size);
1835 
1836 		/* Move slot index to the next message to be sent */
1837 		++tx_slot;
1838 		if (tx_slot == priv->omsg_ring[ch].size)
1839 			tx_slot = 0;
1840 
1841 		dev_id = priv->omsg_ring[ch].dev_id;
1842 		do_callback = 1;
1843 	}
1844 
1845 no_sts_update:
1846 
1847 	if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
1848 		/*
1849 		* Outbound message operation aborted due to error,
1850 		* reinitialize OB MSG channel
1851 		*/
1852 
1853 		tsi_debug(OMSG, &priv->pdev->dev, "OB MSG ABORT ch_stat=%x",
1854 			  ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
1855 
1856 		iowrite32(TSI721_OBDMAC_INT_ERROR,
1857 				priv->regs + TSI721_OBDMAC_INT(ch));
1858 		iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
1859 				priv->regs + TSI721_OBDMAC_CTL(ch));
1860 		ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
1861 
1862 		/* Inform upper level to clear all pending tx slots */
1863 		dev_id = priv->omsg_ring[ch].dev_id;
1864 		tx_slot = priv->omsg_ring[ch].tx_slot;
1865 		do_callback = 1;
1866 
1867 		/* Synch tx_slot tracking */
1868 		iowrite32(priv->omsg_ring[ch].tx_slot,
1869 			priv->regs + TSI721_OBDMAC_DRDCNT(ch));
1870 		ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
1871 		priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
1872 		priv->omsg_ring[ch].sts_rdptr = 0;
1873 	}
1874 
1875 	/* Clear channel interrupts */
1876 	iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
1877 
1878 	if (!(priv->flags & TSI721_USING_MSIX)) {
1879 		u32 ch_inte;
1880 
1881 		/* Re-enable channel interrupts */
1882 		ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1883 		ch_inte |= TSI721_INT_OMSG_CHAN(ch);
1884 		iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
1885 	}
1886 
1887 	spin_unlock(&priv->omsg_ring[ch].lock);
1888 
1889 	if (mport->outb_msg[ch].mcback && do_callback)
1890 		mport->outb_msg[ch].mcback(mport, dev_id, ch, tx_slot);
1891 }
1892 
1893 /**
1894  * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
1895  * @mport: Master port implementing Outbound Messaging Engine
1896  * @dev_id: Device specific pointer to pass on event
1897  * @mbox: Mailbox to open
1898  * @entries: Number of entries in the outbound mailbox ring
1899  *
1900  * Returns: %0 on success or -errno value on failure.
1901  */
1902 static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
1903 				 int mbox, int entries)
1904 {
1905 	struct tsi721_device *priv = mport->priv;
1906 	struct tsi721_omsg_desc *bd_ptr;
1907 	int i, rc = 0;
1908 
1909 	if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
1910 	    (entries > (TSI721_OMSGD_RING_SIZE)) ||
1911 	    (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
1912 		rc = -EINVAL;
1913 		goto out;
1914 	}
1915 
1916 	if ((mbox_sel & (1 << mbox)) == 0) {
1917 		rc = -ENODEV;
1918 		goto out;
1919 	}
1920 
1921 	priv->omsg_ring[mbox].dev_id = dev_id;
1922 	priv->omsg_ring[mbox].size = entries;
1923 	priv->omsg_ring[mbox].sts_rdptr = 0;
1924 	spin_lock_init(&priv->omsg_ring[mbox].lock);
1925 
1926 	/* Outbound Msg Buffer allocation based on
1927 	   the number of maximum descriptor entries */
1928 	for (i = 0; i < entries; i++) {
1929 		priv->omsg_ring[mbox].omq_base[i] =
1930 			dma_alloc_coherent(
1931 				&priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
1932 				&priv->omsg_ring[mbox].omq_phys[i],
1933 				GFP_KERNEL);
1934 		if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
1935 			tsi_debug(OMSG, &priv->pdev->dev,
1936 				  "ENOMEM for OB_MSG_%d data buffer", mbox);
1937 			rc = -ENOMEM;
1938 			goto out_buf;
1939 		}
1940 	}
1941 
1942 	/* Outbound message descriptor allocation */
1943 	priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
1944 				&priv->pdev->dev,
1945 				(entries + 1) * sizeof(struct tsi721_omsg_desc),
1946 				&priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
1947 	if (priv->omsg_ring[mbox].omd_base == NULL) {
1948 		tsi_debug(OMSG, &priv->pdev->dev,
1949 			"ENOMEM for OB_MSG_%d descriptor memory", mbox);
1950 		rc = -ENOMEM;
1951 		goto out_buf;
1952 	}
1953 
1954 	priv->omsg_ring[mbox].tx_slot = 0;
1955 
1956 	/* Outbound message descriptor status FIFO allocation */
1957 	priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
1958 	priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev,
1959 							    priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
1960 							    &priv->omsg_ring[mbox].sts_phys,
1961 							    GFP_KERNEL);
1962 	if (priv->omsg_ring[mbox].sts_base == NULL) {
1963 		tsi_debug(OMSG, &priv->pdev->dev,
1964 			"ENOMEM for OB_MSG_%d status FIFO", mbox);
1965 		rc = -ENOMEM;
1966 		goto out_desc;
1967 	}
1968 
1969 	/*
1970 	 * Configure Outbound Messaging Engine
1971 	 */
1972 
1973 	/* Setup Outbound Message descriptor pointer */
1974 	iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
1975 			priv->regs + TSI721_OBDMAC_DPTRH(mbox));
1976 	iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
1977 					TSI721_OBDMAC_DPTRL_MASK),
1978 			priv->regs + TSI721_OBDMAC_DPTRL(mbox));
1979 
1980 	/* Setup Outbound Message descriptor status FIFO */
1981 	iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
1982 			priv->regs + TSI721_OBDMAC_DSBH(mbox));
1983 	iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
1984 					TSI721_OBDMAC_DSBL_MASK),
1985 			priv->regs + TSI721_OBDMAC_DSBL(mbox));
1986 	iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
1987 		priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
1988 
1989 	/* Enable interrupts */
1990 
1991 #ifdef CONFIG_PCI_MSI
1992 	if (priv->flags & TSI721_USING_MSIX) {
1993 		int idx = TSI721_VECT_OMB0_DONE + mbox;
1994 
1995 		/* Request interrupt service if we are in MSI-X mode */
1996 		rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
1997 				 priv->msix[idx].irq_name, (void *)priv);
1998 
1999 		if (rc) {
2000 			tsi_debug(OMSG, &priv->pdev->dev,
2001 				"Unable to get MSI-X IRQ for OBOX%d-DONE",
2002 				mbox);
2003 			goto out_stat;
2004 		}
2005 
2006 		idx = TSI721_VECT_OMB0_INT + mbox;
2007 		rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
2008 				 priv->msix[idx].irq_name, (void *)priv);
2009 
2010 		if (rc)	{
2011 			tsi_debug(OMSG, &priv->pdev->dev,
2012 				"Unable to get MSI-X IRQ for MBOX%d-INT", mbox);
2013 			idx = TSI721_VECT_OMB0_DONE + mbox;
2014 			free_irq(priv->msix[idx].vector, (void *)priv);
2015 			goto out_stat;
2016 		}
2017 	}
2018 #endif /* CONFIG_PCI_MSI */
2019 
2020 	tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
2021 
2022 	/* Initialize Outbound Message descriptors ring */
2023 	bd_ptr = priv->omsg_ring[mbox].omd_base;
2024 	bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
2025 	bd_ptr[entries].msg_info = 0;
2026 	bd_ptr[entries].next_lo =
2027 		cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
2028 		TSI721_OBDMAC_DPTRL_MASK);
2029 	bd_ptr[entries].next_hi =
2030 		cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
2031 	priv->omsg_ring[mbox].wr_count = 0;
2032 	mb();
2033 
2034 	/* Initialize Outbound Message engine */
2035 	iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
2036 		  priv->regs + TSI721_OBDMAC_CTL(mbox));
2037 	ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
2038 	udelay(10);
2039 
2040 	priv->omsg_init[mbox] = 1;
2041 
2042 	return 0;
2043 
2044 #ifdef CONFIG_PCI_MSI
2045 out_stat:
2046 	dma_free_coherent(&priv->pdev->dev,
2047 		priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
2048 		priv->omsg_ring[mbox].sts_base,
2049 		priv->omsg_ring[mbox].sts_phys);
2050 
2051 	priv->omsg_ring[mbox].sts_base = NULL;
2052 #endif /* CONFIG_PCI_MSI */
2053 
2054 out_desc:
2055 	dma_free_coherent(&priv->pdev->dev,
2056 		(entries + 1) * sizeof(struct tsi721_omsg_desc),
2057 		priv->omsg_ring[mbox].omd_base,
2058 		priv->omsg_ring[mbox].omd_phys);
2059 
2060 	priv->omsg_ring[mbox].omd_base = NULL;
2061 
2062 out_buf:
2063 	for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
2064 		if (priv->omsg_ring[mbox].omq_base[i]) {
2065 			dma_free_coherent(&priv->pdev->dev,
2066 				TSI721_MSG_BUFFER_SIZE,
2067 				priv->omsg_ring[mbox].omq_base[i],
2068 				priv->omsg_ring[mbox].omq_phys[i]);
2069 
2070 			priv->omsg_ring[mbox].omq_base[i] = NULL;
2071 		}
2072 	}
2073 
2074 out:
2075 	return rc;
2076 }
2077 
2078 /**
2079  * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
2080  * @mport: Master port implementing the outbound message unit
2081  * @mbox: Mailbox to close
2082  */
2083 static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
2084 {
2085 	struct tsi721_device *priv = mport->priv;
2086 	u32 i;
2087 
2088 	if (!priv->omsg_init[mbox])
2089 		return;
2090 	priv->omsg_init[mbox] = 0;
2091 
2092 	/* Disable Interrupts */
2093 
2094 	tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
2095 
2096 #ifdef CONFIG_PCI_MSI
2097 	if (priv->flags & TSI721_USING_MSIX) {
2098 		free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
2099 			 (void *)priv);
2100 		free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
2101 			 (void *)priv);
2102 	}
2103 #endif /* CONFIG_PCI_MSI */
2104 
2105 	/* Free OMSG Descriptor Status FIFO */
2106 	dma_free_coherent(&priv->pdev->dev,
2107 		priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
2108 		priv->omsg_ring[mbox].sts_base,
2109 		priv->omsg_ring[mbox].sts_phys);
2110 
2111 	priv->omsg_ring[mbox].sts_base = NULL;
2112 
2113 	/* Free OMSG descriptors */
2114 	dma_free_coherent(&priv->pdev->dev,
2115 		(priv->omsg_ring[mbox].size + 1) *
2116 			sizeof(struct tsi721_omsg_desc),
2117 		priv->omsg_ring[mbox].omd_base,
2118 		priv->omsg_ring[mbox].omd_phys);
2119 
2120 	priv->omsg_ring[mbox].omd_base = NULL;
2121 
2122 	/* Free message buffers */
2123 	for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
2124 		if (priv->omsg_ring[mbox].omq_base[i]) {
2125 			dma_free_coherent(&priv->pdev->dev,
2126 				TSI721_MSG_BUFFER_SIZE,
2127 				priv->omsg_ring[mbox].omq_base[i],
2128 				priv->omsg_ring[mbox].omq_phys[i]);
2129 
2130 			priv->omsg_ring[mbox].omq_base[i] = NULL;
2131 		}
2132 	}
2133 }
2134 
2135 /**
2136  * tsi721_imsg_handler - Inbound Message Interrupt Handler
2137  * @priv: pointer to tsi721 private data
2138  * @ch: inbound message channel number to service
2139  *
2140  * Services channel interrupts from inbound messaging engine.
2141  */
2142 static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
2143 {
2144 	u32 mbox = ch - 4;
2145 	u32 imsg_int;
2146 	struct rio_mport *mport = &priv->mport;
2147 
2148 	spin_lock(&priv->imsg_ring[mbox].lock);
2149 
2150 	imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
2151 
2152 	if (imsg_int & TSI721_IBDMAC_INT_SRTO)
2153 		tsi_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout", mbox);
2154 
2155 	if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
2156 		tsi_info(&priv->pdev->dev, "IB MBOX%d PCIe error", mbox);
2157 
2158 	if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
2159 		tsi_info(&priv->pdev->dev, "IB MBOX%d IB free queue low", mbox);
2160 
2161 	/* Clear IB channel interrupts */
2162 	iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
2163 
2164 	/* If an IB Msg is received notify the upper layer */
2165 	if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
2166 		mport->inb_msg[mbox].mcback)
2167 		mport->inb_msg[mbox].mcback(mport,
2168 				priv->imsg_ring[mbox].dev_id, mbox, -1);
2169 
2170 	if (!(priv->flags & TSI721_USING_MSIX)) {
2171 		u32 ch_inte;
2172 
2173 		/* Re-enable channel interrupts */
2174 		ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
2175 		ch_inte |= TSI721_INT_IMSG_CHAN(ch);
2176 		iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
2177 	}
2178 
2179 	spin_unlock(&priv->imsg_ring[mbox].lock);
2180 }
2181 
2182 /**
2183  * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
2184  * @mport: Master port implementing the Inbound Messaging Engine
2185  * @dev_id: Device specific pointer to pass on event
2186  * @mbox: Mailbox to open
2187  * @entries: Number of entries in the inbound mailbox ring
2188  *
2189  * Returns: %0 on success or -errno value on failure.
2190  */
2191 static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
2192 				int mbox, int entries)
2193 {
2194 	struct tsi721_device *priv = mport->priv;
2195 	int ch = mbox + 4;
2196 	int i;
2197 	u64 *free_ptr;
2198 	int rc = 0;
2199 
2200 	if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
2201 	    (entries > TSI721_IMSGD_RING_SIZE) ||
2202 	    (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
2203 		rc = -EINVAL;
2204 		goto out;
2205 	}
2206 
2207 	if ((mbox_sel & (1 << mbox)) == 0) {
2208 		rc = -ENODEV;
2209 		goto out;
2210 	}
2211 
2212 	/* Initialize IB Messaging Ring */
2213 	priv->imsg_ring[mbox].dev_id = dev_id;
2214 	priv->imsg_ring[mbox].size = entries;
2215 	priv->imsg_ring[mbox].rx_slot = 0;
2216 	priv->imsg_ring[mbox].desc_rdptr = 0;
2217 	priv->imsg_ring[mbox].fq_wrptr = 0;
2218 	for (i = 0; i < priv->imsg_ring[mbox].size; i++)
2219 		priv->imsg_ring[mbox].imq_base[i] = NULL;
2220 	spin_lock_init(&priv->imsg_ring[mbox].lock);
2221 
2222 	/* Allocate buffers for incoming messages */
2223 	priv->imsg_ring[mbox].buf_base =
2224 		dma_alloc_coherent(&priv->pdev->dev,
2225 				   entries * TSI721_MSG_BUFFER_SIZE,
2226 				   &priv->imsg_ring[mbox].buf_phys,
2227 				   GFP_KERNEL);
2228 
2229 	if (priv->imsg_ring[mbox].buf_base == NULL) {
2230 		tsi_err(&priv->pdev->dev,
2231 			"Failed to allocate buffers for IB MBOX%d", mbox);
2232 		rc = -ENOMEM;
2233 		goto out;
2234 	}
2235 
2236 	/* Allocate memory for circular free list */
2237 	priv->imsg_ring[mbox].imfq_base =
2238 		dma_alloc_coherent(&priv->pdev->dev,
2239 				   entries * 8,
2240 				   &priv->imsg_ring[mbox].imfq_phys,
2241 				   GFP_KERNEL);
2242 
2243 	if (priv->imsg_ring[mbox].imfq_base == NULL) {
2244 		tsi_err(&priv->pdev->dev,
2245 			"Failed to allocate free queue for IB MBOX%d", mbox);
2246 		rc = -ENOMEM;
2247 		goto out_buf;
2248 	}
2249 
2250 	/* Allocate memory for Inbound message descriptors */
2251 	priv->imsg_ring[mbox].imd_base =
2252 		dma_alloc_coherent(&priv->pdev->dev,
2253 				   entries * sizeof(struct tsi721_imsg_desc),
2254 				   &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
2255 
2256 	if (priv->imsg_ring[mbox].imd_base == NULL) {
2257 		tsi_err(&priv->pdev->dev,
2258 			"Failed to allocate descriptor memory for IB MBOX%d",
2259 			mbox);
2260 		rc = -ENOMEM;
2261 		goto out_dma;
2262 	}
2263 
2264 	/* Fill free buffer pointer list */
2265 	free_ptr = priv->imsg_ring[mbox].imfq_base;
2266 	for (i = 0; i < entries; i++)
2267 		free_ptr[i] = cpu_to_le64(
2268 				(u64)(priv->imsg_ring[mbox].buf_phys) +
2269 				i * 0x1000);
2270 
2271 	mb();
2272 
2273 	/*
2274 	 * For mapping of inbound SRIO Messages into appropriate queues we need
2275 	 * to set Inbound Device ID register in the messaging engine. We do it
2276 	 * once when first inbound mailbox is requested.
2277 	 */
2278 	if (!(priv->flags & TSI721_IMSGID_SET)) {
2279 		iowrite32((u32)priv->mport.host_deviceid,
2280 			priv->regs + TSI721_IB_DEVID);
2281 		priv->flags |= TSI721_IMSGID_SET;
2282 	}
2283 
2284 	/*
2285 	 * Configure Inbound Messaging channel (ch = mbox + 4)
2286 	 */
2287 
2288 	/* Setup Inbound Message free queue */
2289 	iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
2290 		priv->regs + TSI721_IBDMAC_FQBH(ch));
2291 	iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
2292 			TSI721_IBDMAC_FQBL_MASK),
2293 		priv->regs+TSI721_IBDMAC_FQBL(ch));
2294 	iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
2295 		priv->regs + TSI721_IBDMAC_FQSZ(ch));
2296 
2297 	/* Setup Inbound Message descriptor queue */
2298 	iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
2299 		priv->regs + TSI721_IBDMAC_DQBH(ch));
2300 	iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
2301 		   (u32)TSI721_IBDMAC_DQBL_MASK),
2302 		priv->regs+TSI721_IBDMAC_DQBL(ch));
2303 	iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
2304 		priv->regs + TSI721_IBDMAC_DQSZ(ch));
2305 
2306 	/* Enable interrupts */
2307 
2308 #ifdef CONFIG_PCI_MSI
2309 	if (priv->flags & TSI721_USING_MSIX) {
2310 		int idx = TSI721_VECT_IMB0_RCV + mbox;
2311 
2312 		/* Request interrupt service if we are in MSI-X mode */
2313 		rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
2314 				 priv->msix[idx].irq_name, (void *)priv);
2315 
2316 		if (rc) {
2317 			tsi_debug(IMSG, &priv->pdev->dev,
2318 				"Unable to get MSI-X IRQ for IBOX%d-DONE",
2319 				mbox);
2320 			goto out_desc;
2321 		}
2322 
2323 		idx = TSI721_VECT_IMB0_INT + mbox;
2324 		rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
2325 				 priv->msix[idx].irq_name, (void *)priv);
2326 
2327 		if (rc)	{
2328 			tsi_debug(IMSG, &priv->pdev->dev,
2329 				"Unable to get MSI-X IRQ for IBOX%d-INT", mbox);
2330 			free_irq(
2331 				priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
2332 				(void *)priv);
2333 			goto out_desc;
2334 		}
2335 	}
2336 #endif /* CONFIG_PCI_MSI */
2337 
2338 	tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
2339 
2340 	/* Initialize Inbound Message Engine */
2341 	iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
2342 	ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
2343 	udelay(10);
2344 	priv->imsg_ring[mbox].fq_wrptr = entries - 1;
2345 	iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
2346 
2347 	priv->imsg_init[mbox] = 1;
2348 	return 0;
2349 
2350 #ifdef CONFIG_PCI_MSI
2351 out_desc:
2352 	dma_free_coherent(&priv->pdev->dev,
2353 		priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
2354 		priv->imsg_ring[mbox].imd_base,
2355 		priv->imsg_ring[mbox].imd_phys);
2356 
2357 	priv->imsg_ring[mbox].imd_base = NULL;
2358 #endif /* CONFIG_PCI_MSI */
2359 
2360 out_dma:
2361 	dma_free_coherent(&priv->pdev->dev,
2362 		priv->imsg_ring[mbox].size * 8,
2363 		priv->imsg_ring[mbox].imfq_base,
2364 		priv->imsg_ring[mbox].imfq_phys);
2365 
2366 	priv->imsg_ring[mbox].imfq_base = NULL;
2367 
2368 out_buf:
2369 	dma_free_coherent(&priv->pdev->dev,
2370 		priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
2371 		priv->imsg_ring[mbox].buf_base,
2372 		priv->imsg_ring[mbox].buf_phys);
2373 
2374 	priv->imsg_ring[mbox].buf_base = NULL;
2375 
2376 out:
2377 	return rc;
2378 }
2379 
2380 /**
2381  * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
2382  * @mport: Master port implementing the Inbound Messaging Engine
2383  * @mbox: Mailbox to close
2384  */
2385 static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
2386 {
2387 	struct tsi721_device *priv = mport->priv;
2388 	u32 rx_slot;
2389 	int ch = mbox + 4;
2390 
2391 	if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
2392 		return;
2393 	priv->imsg_init[mbox] = 0;
2394 
2395 	/* Disable Inbound Messaging Engine */
2396 
2397 	/* Disable Interrupts */
2398 	tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
2399 
2400 #ifdef CONFIG_PCI_MSI
2401 	if (priv->flags & TSI721_USING_MSIX) {
2402 		free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
2403 				(void *)priv);
2404 		free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
2405 				(void *)priv);
2406 	}
2407 #endif /* CONFIG_PCI_MSI */
2408 
2409 	/* Clear Inbound Buffer Queue */
2410 	for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
2411 		priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
2412 
2413 	/* Free memory allocated for message buffers */
2414 	dma_free_coherent(&priv->pdev->dev,
2415 		priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
2416 		priv->imsg_ring[mbox].buf_base,
2417 		priv->imsg_ring[mbox].buf_phys);
2418 
2419 	priv->imsg_ring[mbox].buf_base = NULL;
2420 
2421 	/* Free memory allocated for free pointr list */
2422 	dma_free_coherent(&priv->pdev->dev,
2423 		priv->imsg_ring[mbox].size * 8,
2424 		priv->imsg_ring[mbox].imfq_base,
2425 		priv->imsg_ring[mbox].imfq_phys);
2426 
2427 	priv->imsg_ring[mbox].imfq_base = NULL;
2428 
2429 	/* Free memory allocated for RX descriptors */
2430 	dma_free_coherent(&priv->pdev->dev,
2431 		priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
2432 		priv->imsg_ring[mbox].imd_base,
2433 		priv->imsg_ring[mbox].imd_phys);
2434 
2435 	priv->imsg_ring[mbox].imd_base = NULL;
2436 }
2437 
2438 /**
2439  * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
2440  * @mport: Master port implementing the Inbound Messaging Engine
2441  * @mbox: Inbound mailbox number
2442  * @buf: Buffer to add to inbound queue
2443  *
2444  * Returns: %0 on success or -errno value on failure.
2445  */
2446 static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
2447 {
2448 	struct tsi721_device *priv = mport->priv;
2449 	u32 rx_slot;
2450 	int rc = 0;
2451 
2452 	rx_slot = priv->imsg_ring[mbox].rx_slot;
2453 	if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
2454 		tsi_err(&priv->pdev->dev,
2455 			"Error adding inbound buffer %d, buffer exists",
2456 			rx_slot);
2457 		rc = -EINVAL;
2458 		goto out;
2459 	}
2460 
2461 	priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
2462 
2463 	if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
2464 		priv->imsg_ring[mbox].rx_slot = 0;
2465 
2466 out:
2467 	return rc;
2468 }
2469 
2470 /**
2471  * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
2472  * @mport: Master port implementing the Inbound Messaging Engine
2473  * @mbox: Inbound mailbox number
2474  *
2475  * Returns: pointer to the message on success or %NULL on failure.
2476  */
2477 static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
2478 {
2479 	struct tsi721_device *priv = mport->priv;
2480 	struct tsi721_imsg_desc *desc;
2481 	u32 rx_slot;
2482 	void *rx_virt = NULL;
2483 	u64 rx_phys;
2484 	void *buf = NULL;
2485 	u64 *free_ptr;
2486 	int ch = mbox + 4;
2487 	int msg_size;
2488 
2489 	if (!priv->imsg_init[mbox])
2490 		return NULL;
2491 
2492 	desc = priv->imsg_ring[mbox].imd_base;
2493 	desc += priv->imsg_ring[mbox].desc_rdptr;
2494 
2495 	if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
2496 		goto out;
2497 
2498 	rx_slot = priv->imsg_ring[mbox].rx_slot;
2499 	while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
2500 		if (++rx_slot == priv->imsg_ring[mbox].size)
2501 			rx_slot = 0;
2502 	}
2503 
2504 	rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
2505 			le32_to_cpu(desc->bufptr_lo);
2506 
2507 	rx_virt = priv->imsg_ring[mbox].buf_base +
2508 		  (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
2509 
2510 	buf = priv->imsg_ring[mbox].imq_base[rx_slot];
2511 	msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
2512 	if (msg_size == 0)
2513 		msg_size = RIO_MAX_MSG_SIZE;
2514 
2515 	memcpy(buf, rx_virt, msg_size);
2516 	priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
2517 
2518 	desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
2519 	if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
2520 		priv->imsg_ring[mbox].desc_rdptr = 0;
2521 
2522 	iowrite32(priv->imsg_ring[mbox].desc_rdptr,
2523 		priv->regs + TSI721_IBDMAC_DQRP(ch));
2524 
2525 	/* Return free buffer into the pointer list */
2526 	free_ptr = priv->imsg_ring[mbox].imfq_base;
2527 	free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
2528 
2529 	if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
2530 		priv->imsg_ring[mbox].fq_wrptr = 0;
2531 
2532 	iowrite32(priv->imsg_ring[mbox].fq_wrptr,
2533 		priv->regs + TSI721_IBDMAC_FQWP(ch));
2534 out:
2535 	return buf;
2536 }
2537 
2538 /**
2539  * tsi721_messages_init - Initialization of Messaging Engine
2540  * @priv: pointer to tsi721 private data
2541  *
2542  * Configures Tsi721 messaging engine.
2543  *
2544  * Returns: %0
2545  */
2546 static int tsi721_messages_init(struct tsi721_device *priv)
2547 {
2548 	int	ch;
2549 
2550 	iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
2551 	iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
2552 	iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
2553 
2554 	/* Set SRIO Message Request/Response Timeout */
2555 	iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
2556 
2557 	/* Initialize Inbound Messaging Engine Registers */
2558 	for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
2559 		/* Clear interrupt bits */
2560 		iowrite32(TSI721_IBDMAC_INT_MASK,
2561 			priv->regs + TSI721_IBDMAC_INT(ch));
2562 		/* Clear Status */
2563 		iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
2564 
2565 		iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
2566 				priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
2567 		iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
2568 				priv->regs + TSI721_SMSG_ECC_NCOR(ch));
2569 	}
2570 
2571 	return 0;
2572 }
2573 
2574 /**
2575  * tsi721_query_mport - Fetch inbound message from the Tsi721 MSG Queue
2576  * @mport: Master port implementing the Inbound Messaging Engine
2577  * @attr: mport device attributes
2578  *
2579  * Returns: pointer to the message on success or %NULL on failure.
2580  */
2581 static int tsi721_query_mport(struct rio_mport *mport,
2582 			      struct rio_mport_attr *attr)
2583 {
2584 	struct tsi721_device *priv = mport->priv;
2585 	u32 rval;
2586 
2587 	rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0));
2588 	if (rval & RIO_PORT_N_ERR_STS_PORT_OK) {
2589 		rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0));
2590 		attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28;
2591 		rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0));
2592 		attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27;
2593 	} else
2594 		attr->link_speed = RIO_LINK_DOWN;
2595 
2596 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
2597 	attr->flags = RIO_MPORT_DMA | RIO_MPORT_DMA_SG;
2598 	attr->dma_max_sge = 0;
2599 	attr->dma_max_size = TSI721_BDMA_MAX_BCOUNT;
2600 	attr->dma_align = 0;
2601 #else
2602 	attr->flags = 0;
2603 #endif
2604 	return 0;
2605 }
2606 
2607 /**
2608  * tsi721_disable_ints - disables all device interrupts
2609  * @priv: pointer to tsi721 private data
2610  */
2611 static void tsi721_disable_ints(struct tsi721_device *priv)
2612 {
2613 	int ch;
2614 
2615 	/* Disable all device level interrupts */
2616 	iowrite32(0, priv->regs + TSI721_DEV_INTE);
2617 
2618 	/* Disable all Device Channel interrupts */
2619 	iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
2620 
2621 	/* Disable all Inbound Msg Channel interrupts */
2622 	for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
2623 		iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
2624 
2625 	/* Disable all Outbound Msg Channel interrupts */
2626 	for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
2627 		iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
2628 
2629 	/* Disable all general messaging interrupts */
2630 	iowrite32(0, priv->regs + TSI721_SMSG_INTE);
2631 
2632 	/* Disable all BDMA Channel interrupts */
2633 	for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
2634 		iowrite32(0,
2635 			priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE);
2636 
2637 	/* Disable all general BDMA interrupts */
2638 	iowrite32(0, priv->regs + TSI721_BDMA_INTE);
2639 
2640 	/* Disable all SRIO Channel interrupts */
2641 	for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
2642 		iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
2643 
2644 	/* Disable all general SR2PC interrupts */
2645 	iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
2646 
2647 	/* Disable all PC2SR interrupts */
2648 	iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
2649 
2650 	/* Disable all I2C interrupts */
2651 	iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
2652 
2653 	/* Disable SRIO MAC interrupts */
2654 	iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
2655 	iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
2656 }
2657 
2658 static struct rio_ops tsi721_rio_ops = {
2659 	.lcread			= tsi721_lcread,
2660 	.lcwrite		= tsi721_lcwrite,
2661 	.cread			= tsi721_cread_dma,
2662 	.cwrite			= tsi721_cwrite_dma,
2663 	.dsend			= tsi721_dsend,
2664 	.open_inb_mbox		= tsi721_open_inb_mbox,
2665 	.close_inb_mbox		= tsi721_close_inb_mbox,
2666 	.open_outb_mbox		= tsi721_open_outb_mbox,
2667 	.close_outb_mbox	= tsi721_close_outb_mbox,
2668 	.add_outb_message	= tsi721_add_outb_message,
2669 	.add_inb_buffer		= tsi721_add_inb_buffer,
2670 	.get_inb_message	= tsi721_get_inb_message,
2671 	.map_inb		= tsi721_rio_map_inb_mem,
2672 	.unmap_inb		= tsi721_rio_unmap_inb_mem,
2673 	.pwenable		= tsi721_pw_enable,
2674 	.query_mport		= tsi721_query_mport,
2675 	.map_outb		= tsi721_map_outb_win,
2676 	.unmap_outb		= tsi721_unmap_outb_win,
2677 };
2678 
2679 static void tsi721_mport_release(struct device *dev)
2680 {
2681 	struct rio_mport *mport = to_rio_mport(dev);
2682 
2683 	tsi_debug(EXIT, dev, "%s id=%d", mport->name, mport->id);
2684 }
2685 
2686 /**
2687  * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
2688  * @priv: pointer to tsi721 private data
2689  *
2690  * Configures Tsi721 as RapidIO master port.
2691  *
2692  * Returns: %0 on success or -errno value on failure.
2693  */
2694 static int tsi721_setup_mport(struct tsi721_device *priv)
2695 {
2696 	struct pci_dev *pdev = priv->pdev;
2697 	int err = 0;
2698 	struct rio_mport *mport = &priv->mport;
2699 
2700 	err = rio_mport_initialize(mport);
2701 	if (err)
2702 		return err;
2703 
2704 	mport->ops = &tsi721_rio_ops;
2705 	mport->index = 0;
2706 	mport->sys_size = 0; /* small system */
2707 	mport->priv = (void *)priv;
2708 	mport->phys_efptr = 0x100;
2709 	mport->phys_rmap = 1;
2710 	mport->dev.parent = &pdev->dev;
2711 	mport->dev.release = tsi721_mport_release;
2712 
2713 	INIT_LIST_HEAD(&mport->dbells);
2714 
2715 	rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
2716 	rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3);
2717 	rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3);
2718 	snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)",
2719 		 dev_driver_string(&pdev->dev), dev_name(&pdev->dev));
2720 
2721 	/* Hook up interrupt handler */
2722 
2723 #ifdef CONFIG_PCI_MSI
2724 	if (!tsi721_enable_msix(priv))
2725 		priv->flags |= TSI721_USING_MSIX;
2726 	else if (!pci_enable_msi(pdev))
2727 		priv->flags |= TSI721_USING_MSI;
2728 	else
2729 		tsi_debug(MPORT, &pdev->dev,
2730 			 "MSI/MSI-X is not available. Using legacy INTx.");
2731 #endif /* CONFIG_PCI_MSI */
2732 
2733 	err = tsi721_request_irq(priv);
2734 
2735 	if (err) {
2736 		tsi_err(&pdev->dev, "Unable to get PCI IRQ %02X (err=0x%x)",
2737 			pdev->irq, err);
2738 		return err;
2739 	}
2740 
2741 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
2742 	err = tsi721_register_dma(priv);
2743 	if (err)
2744 		goto err_exit;
2745 #endif
2746 	/* Enable SRIO link */
2747 	iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
2748 		  TSI721_DEVCTL_SRBOOT_CMPL,
2749 		  priv->regs + TSI721_DEVCTL);
2750 
2751 	if (mport->host_deviceid >= 0)
2752 		iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
2753 			  RIO_PORT_GEN_DISCOVERED,
2754 			  priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
2755 	else
2756 		iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
2757 
2758 	err = rio_register_mport(mport);
2759 	if (err) {
2760 		tsi721_unregister_dma(priv);
2761 		goto err_exit;
2762 	}
2763 
2764 	return 0;
2765 
2766 err_exit:
2767 	tsi721_free_irq(priv);
2768 	return err;
2769 }
2770 
2771 static int tsi721_probe(struct pci_dev *pdev,
2772 				  const struct pci_device_id *id)
2773 {
2774 	struct tsi721_device *priv;
2775 	int err;
2776 
2777 	priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
2778 	if (!priv) {
2779 		err = -ENOMEM;
2780 		goto err_exit;
2781 	}
2782 
2783 	err = pci_enable_device(pdev);
2784 	if (err) {
2785 		tsi_err(&pdev->dev, "Failed to enable PCI device");
2786 		goto err_clean;
2787 	}
2788 
2789 	priv->pdev = pdev;
2790 
2791 #ifdef DEBUG
2792 	{
2793 		int i;
2794 
2795 		for (i = 0; i < PCI_STD_NUM_BARS; i++) {
2796 			tsi_debug(INIT, &pdev->dev, "res%d %pR",
2797 				  i, &pdev->resource[i]);
2798 		}
2799 	}
2800 #endif
2801 	/*
2802 	 * Verify BAR configuration
2803 	 */
2804 
2805 	/* BAR_0 (registers) must be 512KB+ in 32-bit address space */
2806 	if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
2807 	    pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
2808 	    pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
2809 		tsi_err(&pdev->dev, "Missing or misconfigured CSR BAR0");
2810 		err = -ENODEV;
2811 		goto err_disable_pdev;
2812 	}
2813 
2814 	/* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
2815 	if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
2816 	    pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
2817 	    pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
2818 		tsi_err(&pdev->dev, "Missing or misconfigured Doorbell BAR1");
2819 		err = -ENODEV;
2820 		goto err_disable_pdev;
2821 	}
2822 
2823 	/*
2824 	 * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
2825 	 * space.
2826 	 * NOTE: BAR_2 and BAR_4 are not used by this version of driver.
2827 	 * It may be a good idea to keep them disabled using HW configuration
2828 	 * to save PCI memory space.
2829 	 */
2830 
2831 	priv->p2r_bar[0].size = priv->p2r_bar[1].size = 0;
2832 
2833 	if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64) {
2834 		if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_PREFETCH)
2835 			tsi_debug(INIT, &pdev->dev,
2836 				 "Prefetchable OBW BAR2 will not be used");
2837 		else {
2838 			priv->p2r_bar[0].base = pci_resource_start(pdev, BAR_2);
2839 			priv->p2r_bar[0].size = pci_resource_len(pdev, BAR_2);
2840 		}
2841 	}
2842 
2843 	if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64) {
2844 		if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_PREFETCH)
2845 			tsi_debug(INIT, &pdev->dev,
2846 				 "Prefetchable OBW BAR4 will not be used");
2847 		else {
2848 			priv->p2r_bar[1].base = pci_resource_start(pdev, BAR_4);
2849 			priv->p2r_bar[1].size = pci_resource_len(pdev, BAR_4);
2850 		}
2851 	}
2852 
2853 	err = pci_request_regions(pdev, DRV_NAME);
2854 	if (err) {
2855 		tsi_err(&pdev->dev, "Unable to obtain PCI resources");
2856 		goto err_disable_pdev;
2857 	}
2858 
2859 	pci_set_master(pdev);
2860 
2861 	priv->regs = pci_ioremap_bar(pdev, BAR_0);
2862 	if (!priv->regs) {
2863 		tsi_err(&pdev->dev, "Unable to map device registers space");
2864 		err = -ENOMEM;
2865 		goto err_free_res;
2866 	}
2867 
2868 	priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
2869 	if (!priv->odb_base) {
2870 		tsi_err(&pdev->dev, "Unable to map outbound doorbells space");
2871 		err = -ENOMEM;
2872 		goto err_unmap_bars;
2873 	}
2874 
2875 	/* Configure DMA attributes. */
2876 	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
2877 		err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
2878 		if (err) {
2879 			tsi_err(&pdev->dev, "Unable to set DMA mask");
2880 			goto err_unmap_bars;
2881 		}
2882 
2883 		if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)))
2884 			tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
2885 	} else {
2886 		err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
2887 		if (err)
2888 			tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
2889 	}
2890 
2891 	BUG_ON(!pci_is_pcie(pdev));
2892 
2893 	/* Clear "no snoop" and "relaxed ordering" bits. */
2894 	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
2895 		PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN, 0);
2896 
2897 	/* Override PCIe Maximum Read Request Size setting if requested */
2898 	if (pcie_mrrs >= 0) {
2899 		if (pcie_mrrs <= 5)
2900 			pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
2901 					PCI_EXP_DEVCTL_READRQ, pcie_mrrs << 12);
2902 		else
2903 			tsi_info(&pdev->dev,
2904 				 "Invalid MRRS override value %d", pcie_mrrs);
2905 	}
2906 
2907 	/* Set PCIe completion timeout to 1-10ms */
2908 	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2,
2909 					   PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0x2);
2910 
2911 	/*
2912 	 * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
2913 	 */
2914 	pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
2915 	pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
2916 						TSI721_MSIXTBL_OFFSET);
2917 	pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
2918 						TSI721_MSIXPBA_OFFSET);
2919 	pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
2920 	/* End of FIXUP */
2921 
2922 	tsi721_disable_ints(priv);
2923 
2924 	tsi721_init_pc2sr_mapping(priv);
2925 	tsi721_init_sr2pc_mapping(priv);
2926 
2927 	if (tsi721_bdma_maint_init(priv)) {
2928 		tsi_err(&pdev->dev, "BDMA initialization failed");
2929 		err = -ENOMEM;
2930 		goto err_unmap_bars;
2931 	}
2932 
2933 	err = tsi721_doorbell_init(priv);
2934 	if (err)
2935 		goto err_free_bdma;
2936 
2937 	tsi721_port_write_init(priv);
2938 
2939 	err = tsi721_messages_init(priv);
2940 	if (err)
2941 		goto err_free_consistent;
2942 
2943 	err = tsi721_setup_mport(priv);
2944 	if (err)
2945 		goto err_free_consistent;
2946 
2947 	pci_set_drvdata(pdev, priv);
2948 	tsi721_interrupts_init(priv);
2949 
2950 	return 0;
2951 
2952 err_free_consistent:
2953 	tsi721_port_write_free(priv);
2954 	tsi721_doorbell_free(priv);
2955 err_free_bdma:
2956 	tsi721_bdma_maint_free(priv);
2957 err_unmap_bars:
2958 	if (priv->regs)
2959 		iounmap(priv->regs);
2960 	if (priv->odb_base)
2961 		iounmap(priv->odb_base);
2962 err_free_res:
2963 	pci_release_regions(pdev);
2964 err_disable_pdev:
2965 	pci_disable_device(pdev);
2966 err_clean:
2967 	kfree(priv);
2968 err_exit:
2969 	return err;
2970 }
2971 
2972 static void tsi721_remove(struct pci_dev *pdev)
2973 {
2974 	struct tsi721_device *priv = pci_get_drvdata(pdev);
2975 
2976 	tsi_debug(EXIT, &pdev->dev, "enter");
2977 
2978 	tsi721_disable_ints(priv);
2979 	tsi721_free_irq(priv);
2980 	flush_work(&priv->idb_work);
2981 	flush_work(&priv->pw_work);
2982 	rio_unregister_mport(&priv->mport);
2983 
2984 	tsi721_unregister_dma(priv);
2985 	tsi721_bdma_maint_free(priv);
2986 	tsi721_doorbell_free(priv);
2987 	tsi721_port_write_free(priv);
2988 	tsi721_close_sr2pc_mapping(priv);
2989 
2990 	if (priv->regs)
2991 		iounmap(priv->regs);
2992 	if (priv->odb_base)
2993 		iounmap(priv->odb_base);
2994 #ifdef CONFIG_PCI_MSI
2995 	if (priv->flags & TSI721_USING_MSIX)
2996 		pci_disable_msix(priv->pdev);
2997 	else if (priv->flags & TSI721_USING_MSI)
2998 		pci_disable_msi(priv->pdev);
2999 #endif
3000 	pci_release_regions(pdev);
3001 	pci_disable_device(pdev);
3002 	pci_set_drvdata(pdev, NULL);
3003 	kfree(priv);
3004 	tsi_debug(EXIT, &pdev->dev, "exit");
3005 }
3006 
3007 static void tsi721_shutdown(struct pci_dev *pdev)
3008 {
3009 	struct tsi721_device *priv = pci_get_drvdata(pdev);
3010 
3011 	tsi_debug(EXIT, &pdev->dev, "enter");
3012 
3013 	tsi721_disable_ints(priv);
3014 	tsi721_dma_stop_all(priv);
3015 	pci_disable_device(pdev);
3016 }
3017 
3018 static const struct pci_device_id tsi721_pci_tbl[] = {
3019 	{ PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
3020 	{ 0, }	/* terminate list */
3021 };
3022 
3023 MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
3024 
3025 static struct pci_driver tsi721_driver = {
3026 	.name		= "tsi721",
3027 	.id_table	= tsi721_pci_tbl,
3028 	.probe		= tsi721_probe,
3029 	.remove		= tsi721_remove,
3030 	.shutdown	= tsi721_shutdown,
3031 };
3032 
3033 module_pci_driver(tsi721_driver);
3034 
3035 MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver");
3036 MODULE_AUTHOR("Integrated Device Technology, Inc.");
3037 MODULE_LICENSE("GPL");
3038