xref: /linux/drivers/pwm/pwm-vt8500.c (revision e6a901a00822659181c93c86d8bbc2a17779fddc)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/pwm/pwm-vt8500.c
4  *
5  * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
6  * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
7  */
8 
9 #include <linux/mod_devicetable.h>
10 #include <linux/module.h>
11 #include <linux/kernel.h>
12 #include <linux/platform_device.h>
13 #include <linux/slab.h>
14 #include <linux/err.h>
15 #include <linux/io.h>
16 #include <linux/pwm.h>
17 #include <linux/delay.h>
18 #include <linux/clk.h>
19 
20 #include <asm/div64.h>
21 
22 /*
23  * SoC architecture allocates register space for 4 PWMs but only
24  * 2 are currently implemented.
25  */
26 #define VT8500_NR_PWMS	2
27 
28 #define REG_CTRL(pwm)		(((pwm) << 4) + 0x00)
29 #define REG_SCALAR(pwm)		(((pwm) << 4) + 0x04)
30 #define REG_PERIOD(pwm)		(((pwm) << 4) + 0x08)
31 #define REG_DUTY(pwm)		(((pwm) << 4) + 0x0C)
32 #define REG_STATUS		0x40
33 
34 #define CTRL_ENABLE		BIT(0)
35 #define CTRL_INVERT		BIT(1)
36 #define CTRL_AUTOLOAD		BIT(2)
37 #define CTRL_STOP_IMM		BIT(3)
38 #define CTRL_LOAD_PRESCALE	BIT(4)
39 #define CTRL_LOAD_PERIOD	BIT(5)
40 
41 #define STATUS_CTRL_UPDATE	BIT(0)
42 #define STATUS_SCALAR_UPDATE	BIT(1)
43 #define STATUS_PERIOD_UPDATE	BIT(2)
44 #define STATUS_DUTY_UPDATE	BIT(3)
45 #define STATUS_ALL_UPDATE	0x0F
46 
47 struct vt8500_chip {
48 	void __iomem *base;
49 	struct clk *clk;
50 };
51 
52 static inline struct vt8500_chip *to_vt8500_chip(struct pwm_chip *chip)
53 {
54 	return pwmchip_get_drvdata(chip);
55 }
56 
57 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
58 static inline void vt8500_pwm_busy_wait(struct pwm_chip *chip, int nr, u8 bitmask)
59 {
60 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
61 	int loops = msecs_to_loops(10);
62 	u32 mask = bitmask << (nr << 8);
63 
64 	while ((readl(vt8500->base + REG_STATUS) & mask) && --loops)
65 		cpu_relax();
66 
67 	if (unlikely(!loops))
68 		dev_warn(pwmchip_parent(chip), "Waiting for status bits 0x%x to clear timed out\n",
69 			 mask);
70 }
71 
72 static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
73 		u64 duty_ns, u64 period_ns)
74 {
75 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
76 	unsigned long long c;
77 	unsigned long period_cycles, prescale, pv, dc;
78 	int err;
79 	u32 val;
80 
81 	err = clk_enable(vt8500->clk);
82 	if (err < 0) {
83 		dev_err(pwmchip_parent(chip), "failed to enable clock\n");
84 		return err;
85 	}
86 
87 	c = clk_get_rate(vt8500->clk);
88 	c = c * period_ns;
89 	do_div(c, 1000000000);
90 	period_cycles = c;
91 
92 	if (period_cycles < 1)
93 		period_cycles = 1;
94 	prescale = (period_cycles - 1) / 4096;
95 	pv = period_cycles / (prescale + 1) - 1;
96 	if (pv > 4095)
97 		pv = 4095;
98 
99 	if (prescale > 1023) {
100 		clk_disable(vt8500->clk);
101 		return -EINVAL;
102 	}
103 
104 	c = (unsigned long long)pv * duty_ns;
105 
106 	dc = div64_u64(c, period_ns);
107 
108 	writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm));
109 	vt8500_pwm_busy_wait(chip, pwm->hwpwm, STATUS_SCALAR_UPDATE);
110 
111 	writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm));
112 	vt8500_pwm_busy_wait(chip, pwm->hwpwm, STATUS_PERIOD_UPDATE);
113 
114 	writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm));
115 	vt8500_pwm_busy_wait(chip, pwm->hwpwm, STATUS_DUTY_UPDATE);
116 
117 	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
118 	val |= CTRL_AUTOLOAD;
119 	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
120 	vt8500_pwm_busy_wait(chip, pwm->hwpwm, STATUS_CTRL_UPDATE);
121 
122 	clk_disable(vt8500->clk);
123 	return 0;
124 }
125 
126 static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
127 {
128 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
129 	int err;
130 	u32 val;
131 
132 	err = clk_enable(vt8500->clk);
133 	if (err < 0) {
134 		dev_err(pwmchip_parent(chip), "failed to enable clock\n");
135 		return err;
136 	}
137 
138 	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
139 	val |= CTRL_ENABLE;
140 	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
141 	vt8500_pwm_busy_wait(chip, pwm->hwpwm, STATUS_CTRL_UPDATE);
142 
143 	return 0;
144 }
145 
146 static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
147 {
148 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
149 	u32 val;
150 
151 	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
152 	val &= ~CTRL_ENABLE;
153 	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
154 	vt8500_pwm_busy_wait(chip, pwm->hwpwm, STATUS_CTRL_UPDATE);
155 
156 	clk_disable(vt8500->clk);
157 }
158 
159 static int vt8500_pwm_set_polarity(struct pwm_chip *chip,
160 				   struct pwm_device *pwm,
161 				   enum pwm_polarity polarity)
162 {
163 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
164 	u32 val;
165 
166 	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
167 
168 	if (polarity == PWM_POLARITY_INVERSED)
169 		val |= CTRL_INVERT;
170 	else
171 		val &= ~CTRL_INVERT;
172 
173 	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
174 	vt8500_pwm_busy_wait(chip, pwm->hwpwm, STATUS_CTRL_UPDATE);
175 
176 	return 0;
177 }
178 
179 static int vt8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
180 			    const struct pwm_state *state)
181 {
182 	int err;
183 	bool enabled = pwm->state.enabled;
184 
185 	if (state->polarity != pwm->state.polarity) {
186 		/*
187 		 * Changing the polarity of a running PWM is only allowed when
188 		 * the PWM driver implements ->apply().
189 		 */
190 		if (enabled) {
191 			vt8500_pwm_disable(chip, pwm);
192 
193 			enabled = false;
194 		}
195 
196 		err = vt8500_pwm_set_polarity(chip, pwm, state->polarity);
197 		if (err)
198 			return err;
199 	}
200 
201 	if (!state->enabled) {
202 		if (enabled)
203 			vt8500_pwm_disable(chip, pwm);
204 
205 		return 0;
206 	}
207 
208 	/*
209 	 * We cannot skip calling ->config even if state->period ==
210 	 * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle
211 	 * because we might have exited early in the last call to
212 	 * pwm_apply_might_sleep because of !state->enabled and so the two values in
213 	 * pwm->state might not be configured in hardware.
214 	 */
215 	err = vt8500_pwm_config(chip, pwm, state->duty_cycle, state->period);
216 	if (err)
217 		return err;
218 
219 	if (!enabled)
220 		err = vt8500_pwm_enable(chip, pwm);
221 
222 	return err;
223 }
224 
225 static const struct pwm_ops vt8500_pwm_ops = {
226 	.apply = vt8500_pwm_apply,
227 };
228 
229 static const struct of_device_id vt8500_pwm_dt_ids[] = {
230 	{ .compatible = "via,vt8500-pwm", },
231 	{ /* Sentinel */ }
232 };
233 MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
234 
235 static int vt8500_pwm_probe(struct platform_device *pdev)
236 {
237 	struct pwm_chip *chip;
238 	struct vt8500_chip *vt8500;
239 	struct device_node *np = pdev->dev.of_node;
240 	int ret;
241 
242 	if (!np)
243 		return dev_err_probe(&pdev->dev, -EINVAL, "invalid devicetree node\n");
244 
245 	chip = devm_pwmchip_alloc(&pdev->dev, VT8500_NR_PWMS, sizeof(*vt8500));
246 	if (IS_ERR(chip))
247 		return PTR_ERR(chip);
248 	vt8500 = to_vt8500_chip(chip);
249 
250 	chip->ops = &vt8500_pwm_ops;
251 
252 	vt8500->clk = devm_clk_get_prepared(&pdev->dev, NULL);
253 	if (IS_ERR(vt8500->clk))
254 		return dev_err_probe(&pdev->dev, PTR_ERR(vt8500->clk), "clock source not specified\n");
255 
256 	vt8500->base = devm_platform_ioremap_resource(pdev, 0);
257 	if (IS_ERR(vt8500->base))
258 		return PTR_ERR(vt8500->base);
259 
260 	ret = devm_pwmchip_add(&pdev->dev, chip);
261 	if (ret < 0)
262 		return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
263 
264 	return 0;
265 }
266 
267 static struct platform_driver vt8500_pwm_driver = {
268 	.probe		= vt8500_pwm_probe,
269 	.driver		= {
270 		.name	= "vt8500-pwm",
271 		.of_match_table = vt8500_pwm_dt_ids,
272 	},
273 };
274 module_platform_driver(vt8500_pwm_driver);
275 
276 MODULE_DESCRIPTION("VT8500 PWM Driver");
277 MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
278 MODULE_LICENSE("GPL v2");
279