1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for Allwinner sun4i Pulse Width Modulation Controller 4 * 5 * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> 6 * 7 * Limitations: 8 * - When outputing the source clock directly, the PWM logic will be bypassed 9 * and the currently running period is not guaranteed to be completed 10 */ 11 12 #include <linux/bitops.h> 13 #include <linux/clk.h> 14 #include <linux/delay.h> 15 #include <linux/err.h> 16 #include <linux/io.h> 17 #include <linux/jiffies.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/platform_device.h> 21 #include <linux/pwm.h> 22 #include <linux/reset.h> 23 #include <linux/slab.h> 24 #include <linux/spinlock.h> 25 #include <linux/time.h> 26 27 #define PWM_CTRL_REG 0x0 28 29 #define PWM_CH_PRD_BASE 0x4 30 #define PWM_CH_PRD_OFFSET 0x4 31 #define PWM_CH_PRD(ch) (PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch)) 32 33 #define PWMCH_OFFSET 15 34 #define PWM_PRESCAL_MASK GENMASK(3, 0) 35 #define PWM_PRESCAL_OFF 0 36 #define PWM_EN BIT(4) 37 #define PWM_ACT_STATE BIT(5) 38 #define PWM_CLK_GATING BIT(6) 39 #define PWM_MODE BIT(7) 40 #define PWM_PULSE BIT(8) 41 #define PWM_BYPASS BIT(9) 42 43 #define PWM_RDY_BASE 28 44 #define PWM_RDY_OFFSET 1 45 #define PWM_RDY(ch) BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch)) 46 47 #define PWM_PRD(prd) (((prd) - 1) << 16) 48 #define PWM_PRD_MASK GENMASK(15, 0) 49 50 #define PWM_DTY_MASK GENMASK(15, 0) 51 52 #define PWM_REG_PRD(reg) ((((reg) >> 16) & PWM_PRD_MASK) + 1) 53 #define PWM_REG_DTY(reg) ((reg) & PWM_DTY_MASK) 54 #define PWM_REG_PRESCAL(reg, chan) (((reg) >> ((chan) * PWMCH_OFFSET)) & PWM_PRESCAL_MASK) 55 56 #define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET)) 57 58 static const u32 prescaler_table[] = { 59 120, 60 180, 61 240, 62 360, 63 480, 64 0, 65 0, 66 0, 67 12000, 68 24000, 69 36000, 70 48000, 71 72000, 72 0, 73 0, 74 0, /* Actually 1 but tested separately */ 75 }; 76 77 struct sun4i_pwm_data { 78 bool has_prescaler_bypass; 79 bool has_direct_mod_clk_output; 80 unsigned int npwm; 81 }; 82 83 struct sun4i_pwm_chip { 84 struct clk *bus_clk; 85 struct clk *clk; 86 struct reset_control *rst; 87 void __iomem *base; 88 spinlock_t ctrl_lock; 89 const struct sun4i_pwm_data *data; 90 }; 91 92 static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip) 93 { 94 return pwmchip_get_drvdata(chip); 95 } 96 97 static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *sun4ichip, 98 unsigned long offset) 99 { 100 return readl(sun4ichip->base + offset); 101 } 102 103 static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *sun4ichip, 104 u32 val, unsigned long offset) 105 { 106 writel(val, sun4ichip->base + offset); 107 } 108 109 static int sun4i_pwm_get_state(struct pwm_chip *chip, 110 struct pwm_device *pwm, 111 struct pwm_state *state) 112 { 113 struct sun4i_pwm_chip *sun4ichip = to_sun4i_pwm_chip(chip); 114 u64 clk_rate, tmp; 115 u32 val; 116 unsigned int prescaler; 117 118 clk_rate = clk_get_rate(sun4ichip->clk); 119 if (!clk_rate) 120 return -EINVAL; 121 122 val = sun4i_pwm_readl(sun4ichip, PWM_CTRL_REG); 123 124 /* 125 * PWM chapter in H6 manual has a diagram which explains that if bypass 126 * bit is set, no other setting has any meaning. Even more, experiment 127 * proved that also enable bit is ignored in this case. 128 */ 129 if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) && 130 sun4ichip->data->has_direct_mod_clk_output) { 131 state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate); 132 state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2); 133 state->polarity = PWM_POLARITY_NORMAL; 134 state->enabled = true; 135 return 0; 136 } 137 138 if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) && 139 sun4ichip->data->has_prescaler_bypass) 140 prescaler = 1; 141 else 142 prescaler = prescaler_table[PWM_REG_PRESCAL(val, pwm->hwpwm)]; 143 144 if (prescaler == 0) 145 return -EINVAL; 146 147 if (val & BIT_CH(PWM_ACT_STATE, pwm->hwpwm)) 148 state->polarity = PWM_POLARITY_NORMAL; 149 else 150 state->polarity = PWM_POLARITY_INVERSED; 151 152 if ((val & BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) == 153 BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) 154 state->enabled = true; 155 else 156 state->enabled = false; 157 158 val = sun4i_pwm_readl(sun4ichip, PWM_CH_PRD(pwm->hwpwm)); 159 160 tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val); 161 state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate); 162 163 tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val); 164 state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate); 165 166 return 0; 167 } 168 169 static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4ichip, 170 const struct pwm_state *state, 171 u32 *dty, u32 *prd, unsigned int *prsclr, 172 bool *bypass) 173 { 174 u64 clk_rate, div = 0; 175 unsigned int prescaler = 0; 176 177 clk_rate = clk_get_rate(sun4ichip->clk); 178 179 *bypass = sun4ichip->data->has_direct_mod_clk_output && 180 state->enabled && 181 (state->period * clk_rate >= NSEC_PER_SEC) && 182 (state->period * clk_rate < 2 * NSEC_PER_SEC) && 183 (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC); 184 185 /* Skip calculation of other parameters if we bypass them */ 186 if (*bypass) 187 return 0; 188 189 if (sun4ichip->data->has_prescaler_bypass) { 190 /* First, test without any prescaler when available */ 191 prescaler = PWM_PRESCAL_MASK; 192 /* 193 * When not using any prescaler, the clock period in nanoseconds 194 * is not an integer so round it half up instead of 195 * truncating to get less surprising values. 196 */ 197 div = clk_rate * state->period + NSEC_PER_SEC / 2; 198 do_div(div, NSEC_PER_SEC); 199 if (div - 1 > PWM_PRD_MASK) 200 prescaler = 0; 201 } 202 203 if (prescaler == 0) { 204 /* Go up from the first divider */ 205 for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) { 206 unsigned int pval = prescaler_table[prescaler]; 207 208 if (!pval) 209 continue; 210 211 div = clk_rate; 212 do_div(div, pval); 213 div = div * state->period; 214 do_div(div, NSEC_PER_SEC); 215 if (div - 1 <= PWM_PRD_MASK) 216 break; 217 } 218 219 if (div - 1 > PWM_PRD_MASK) 220 return -EINVAL; 221 } 222 223 *prd = div; 224 div *= state->duty_cycle; 225 do_div(div, state->period); 226 *dty = div; 227 *prsclr = prescaler; 228 229 return 0; 230 } 231 232 static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 233 const struct pwm_state *state) 234 { 235 struct sun4i_pwm_chip *sun4ichip = to_sun4i_pwm_chip(chip); 236 struct pwm_state cstate; 237 u32 ctrl, duty = 0, period = 0, val; 238 int ret; 239 unsigned int delay_us, prescaler = 0; 240 bool bypass; 241 242 pwm_get_state(pwm, &cstate); 243 244 if (!cstate.enabled) { 245 ret = clk_prepare_enable(sun4ichip->clk); 246 if (ret) { 247 dev_err(pwmchip_parent(chip), "failed to enable PWM clock\n"); 248 return ret; 249 } 250 } 251 252 ret = sun4i_pwm_calculate(sun4ichip, state, &duty, &period, &prescaler, 253 &bypass); 254 if (ret) { 255 dev_err(pwmchip_parent(chip), "period exceeds the maximum value\n"); 256 if (!cstate.enabled) 257 clk_disable_unprepare(sun4ichip->clk); 258 return ret; 259 } 260 261 spin_lock(&sun4ichip->ctrl_lock); 262 ctrl = sun4i_pwm_readl(sun4ichip, PWM_CTRL_REG); 263 264 if (sun4ichip->data->has_direct_mod_clk_output) { 265 if (bypass) { 266 ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm); 267 /* We can skip other parameter */ 268 sun4i_pwm_writel(sun4ichip, ctrl, PWM_CTRL_REG); 269 spin_unlock(&sun4ichip->ctrl_lock); 270 return 0; 271 } 272 273 ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm); 274 } 275 276 if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) { 277 /* Prescaler changed, the clock has to be gated */ 278 ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); 279 sun4i_pwm_writel(sun4ichip, ctrl, PWM_CTRL_REG); 280 281 ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm); 282 ctrl |= BIT_CH(prescaler, pwm->hwpwm); 283 } 284 285 val = (duty & PWM_DTY_MASK) | PWM_PRD(period); 286 sun4i_pwm_writel(sun4ichip, val, PWM_CH_PRD(pwm->hwpwm)); 287 288 if (state->polarity != PWM_POLARITY_NORMAL) 289 ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm); 290 else 291 ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm); 292 293 ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm); 294 295 if (state->enabled) 296 ctrl |= BIT_CH(PWM_EN, pwm->hwpwm); 297 298 sun4i_pwm_writel(sun4ichip, ctrl, PWM_CTRL_REG); 299 300 spin_unlock(&sun4ichip->ctrl_lock); 301 302 if (state->enabled) 303 return 0; 304 305 /* We need a full period to elapse before disabling the channel. */ 306 delay_us = DIV_ROUND_UP_ULL(cstate.period, NSEC_PER_USEC); 307 if ((delay_us / 500) > MAX_UDELAY_MS) 308 msleep(delay_us / 1000 + 1); 309 else 310 usleep_range(delay_us, delay_us * 2); 311 312 spin_lock(&sun4ichip->ctrl_lock); 313 ctrl = sun4i_pwm_readl(sun4ichip, PWM_CTRL_REG); 314 ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); 315 ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm); 316 sun4i_pwm_writel(sun4ichip, ctrl, PWM_CTRL_REG); 317 spin_unlock(&sun4ichip->ctrl_lock); 318 319 clk_disable_unprepare(sun4ichip->clk); 320 321 return 0; 322 } 323 324 static const struct pwm_ops sun4i_pwm_ops = { 325 .apply = sun4i_pwm_apply, 326 .get_state = sun4i_pwm_get_state, 327 }; 328 329 static const struct sun4i_pwm_data sun4i_pwm_dual_nobypass = { 330 .has_prescaler_bypass = false, 331 .npwm = 2, 332 }; 333 334 static const struct sun4i_pwm_data sun4i_pwm_dual_bypass = { 335 .has_prescaler_bypass = true, 336 .npwm = 2, 337 }; 338 339 static const struct sun4i_pwm_data sun4i_pwm_single_bypass = { 340 .has_prescaler_bypass = true, 341 .npwm = 1, 342 }; 343 344 static const struct sun4i_pwm_data sun50i_a64_pwm_data = { 345 .has_prescaler_bypass = true, 346 .has_direct_mod_clk_output = true, 347 .npwm = 1, 348 }; 349 350 static const struct sun4i_pwm_data sun50i_h6_pwm_data = { 351 .has_prescaler_bypass = true, 352 .has_direct_mod_clk_output = true, 353 .npwm = 2, 354 }; 355 356 static const struct of_device_id sun4i_pwm_dt_ids[] = { 357 { 358 .compatible = "allwinner,sun4i-a10-pwm", 359 .data = &sun4i_pwm_dual_nobypass, 360 }, { 361 .compatible = "allwinner,sun5i-a10s-pwm", 362 .data = &sun4i_pwm_dual_bypass, 363 }, { 364 .compatible = "allwinner,sun5i-a13-pwm", 365 .data = &sun4i_pwm_single_bypass, 366 }, { 367 .compatible = "allwinner,sun7i-a20-pwm", 368 .data = &sun4i_pwm_dual_bypass, 369 }, { 370 .compatible = "allwinner,sun8i-h3-pwm", 371 .data = &sun4i_pwm_single_bypass, 372 }, { 373 .compatible = "allwinner,sun50i-a64-pwm", 374 .data = &sun50i_a64_pwm_data, 375 }, { 376 .compatible = "allwinner,sun50i-h6-pwm", 377 .data = &sun50i_h6_pwm_data, 378 }, { 379 /* sentinel */ 380 }, 381 }; 382 MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids); 383 384 static int sun4i_pwm_probe(struct platform_device *pdev) 385 { 386 struct pwm_chip *chip; 387 const struct sun4i_pwm_data *data; 388 struct sun4i_pwm_chip *sun4ichip; 389 int ret; 390 391 data = of_device_get_match_data(&pdev->dev); 392 if (!data) 393 return -ENODEV; 394 395 chip = devm_pwmchip_alloc(&pdev->dev, data->npwm, sizeof(*sun4ichip)); 396 if (IS_ERR(chip)) 397 return PTR_ERR(chip); 398 sun4ichip = to_sun4i_pwm_chip(chip); 399 400 sun4ichip->data = data; 401 sun4ichip->base = devm_platform_ioremap_resource(pdev, 0); 402 if (IS_ERR(sun4ichip->base)) 403 return PTR_ERR(sun4ichip->base); 404 405 /* 406 * All hardware variants need a source clock that is divided and 407 * then feeds the counter that defines the output wave form. In the 408 * device tree this clock is either unnamed or called "mod". 409 * Some variants (e.g. H6) need another clock to access the 410 * hardware registers; this is called "bus". 411 * So we request "mod" first (and ignore the corner case that a 412 * parent provides a "mod" clock while the right one would be the 413 * unnamed one of the PWM device) and if this is not found we fall 414 * back to the first clock of the PWM. 415 */ 416 sun4ichip->clk = devm_clk_get_optional(&pdev->dev, "mod"); 417 if (IS_ERR(sun4ichip->clk)) 418 return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->clk), 419 "get mod clock failed\n"); 420 421 if (!sun4ichip->clk) { 422 sun4ichip->clk = devm_clk_get(&pdev->dev, NULL); 423 if (IS_ERR(sun4ichip->clk)) 424 return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->clk), 425 "get unnamed clock failed\n"); 426 } 427 428 sun4ichip->bus_clk = devm_clk_get_optional(&pdev->dev, "bus"); 429 if (IS_ERR(sun4ichip->bus_clk)) 430 return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->bus_clk), 431 "get bus clock failed\n"); 432 433 sun4ichip->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL); 434 if (IS_ERR(sun4ichip->rst)) 435 return dev_err_probe(&pdev->dev, PTR_ERR(sun4ichip->rst), 436 "get reset failed\n"); 437 438 /* Deassert reset */ 439 ret = reset_control_deassert(sun4ichip->rst); 440 if (ret) { 441 dev_err(&pdev->dev, "cannot deassert reset control: %pe\n", 442 ERR_PTR(ret)); 443 return ret; 444 } 445 446 /* 447 * We're keeping the bus clock on for the sake of simplicity. 448 * Actually it only needs to be on for hardware register accesses. 449 */ 450 ret = clk_prepare_enable(sun4ichip->bus_clk); 451 if (ret) { 452 dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n", 453 ERR_PTR(ret)); 454 goto err_bus; 455 } 456 457 chip->ops = &sun4i_pwm_ops; 458 459 spin_lock_init(&sun4ichip->ctrl_lock); 460 461 ret = pwmchip_add(chip); 462 if (ret < 0) { 463 dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); 464 goto err_pwm_add; 465 } 466 467 platform_set_drvdata(pdev, chip); 468 469 return 0; 470 471 err_pwm_add: 472 clk_disable_unprepare(sun4ichip->bus_clk); 473 err_bus: 474 reset_control_assert(sun4ichip->rst); 475 476 return ret; 477 } 478 479 static void sun4i_pwm_remove(struct platform_device *pdev) 480 { 481 struct pwm_chip *chip = platform_get_drvdata(pdev); 482 struct sun4i_pwm_chip *sun4ichip = to_sun4i_pwm_chip(chip); 483 484 pwmchip_remove(chip); 485 486 clk_disable_unprepare(sun4ichip->bus_clk); 487 reset_control_assert(sun4ichip->rst); 488 } 489 490 static struct platform_driver sun4i_pwm_driver = { 491 .driver = { 492 .name = "sun4i-pwm", 493 .of_match_table = sun4i_pwm_dt_ids, 494 }, 495 .probe = sun4i_pwm_probe, 496 .remove_new = sun4i_pwm_remove, 497 }; 498 module_platform_driver(sun4i_pwm_driver); 499 500 MODULE_ALIAS("platform:sun4i-pwm"); 501 MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); 502 MODULE_DESCRIPTION("Allwinner sun4i PWM driver"); 503 MODULE_LICENSE("GPL v2"); 504