xref: /linux/drivers/pwm/pwm-spear.c (revision 24168c5e6dfbdd5b414f048f47f75d64533296ca)
1 /*
2  * ST Microelectronics SPEAr Pulse Width Modulator driver
3  *
4  * Copyright (C) 2012 ST Microelectronics
5  * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
6  *
7  * This file is licensed under the terms of the GNU General Public
8  * License version 2. This program is licensed "as is" without any
9  * warranty of any kind, whether express or implied.
10  */
11 
12 #include <linux/clk.h>
13 #include <linux/err.h>
14 #include <linux/io.h>
15 #include <linux/ioport.h>
16 #include <linux/kernel.h>
17 #include <linux/math64.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/platform_device.h>
21 #include <linux/pwm.h>
22 #include <linux/slab.h>
23 #include <linux/types.h>
24 
25 #define NUM_PWM		4
26 
27 /* PWM registers and bits definitions */
28 #define PWMCR			0x00	/* Control Register */
29 #define PWMCR_PWM_ENABLE	0x1
30 #define PWMCR_PRESCALE_SHIFT	2
31 #define PWMCR_MIN_PRESCALE	0x00
32 #define PWMCR_MAX_PRESCALE	0x3FFF
33 
34 #define PWMDCR			0x04	/* Duty Cycle Register */
35 #define PWMDCR_MIN_DUTY		0x0001
36 #define PWMDCR_MAX_DUTY		0xFFFF
37 
38 #define PWMPCR			0x08	/* Period Register */
39 #define PWMPCR_MIN_PERIOD	0x0001
40 #define PWMPCR_MAX_PERIOD	0xFFFF
41 
42 /* Following only available on 13xx SoCs */
43 #define PWMMCR			0x3C	/* Master Control Register */
44 #define PWMMCR_PWM_ENABLE	0x1
45 
46 /**
47  * struct spear_pwm_chip - struct representing pwm chip
48  *
49  * @mmio_base: base address of pwm chip
50  * @clk: pointer to clk structure of pwm chip
51  */
52 struct spear_pwm_chip {
53 	void __iomem *mmio_base;
54 	struct clk *clk;
55 };
56 
57 static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip)
58 {
59 	return pwmchip_get_drvdata(chip);
60 }
61 
62 static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num,
63 				  unsigned long offset)
64 {
65 	return readl_relaxed(chip->mmio_base + (num << 4) + offset);
66 }
67 
68 static inline void spear_pwm_writel(struct spear_pwm_chip *chip,
69 				    unsigned int num, unsigned long offset,
70 				    unsigned long val)
71 {
72 	writel_relaxed(val, chip->mmio_base + (num << 4) + offset);
73 }
74 
75 static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
76 			    u64 duty_ns, u64 period_ns)
77 {
78 	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
79 	u64 val, div, clk_rate;
80 	unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc;
81 	int ret;
82 
83 	/*
84 	 * Find pv, dc and prescale to suit duty_ns and period_ns. This is done
85 	 * according to formulas described below:
86 	 *
87 	 * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE
88 	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
89 	 *
90 	 * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
91 	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
92 	 */
93 	clk_rate = clk_get_rate(pc->clk);
94 	while (1) {
95 		div = 1000000000;
96 		div *= 1 + prescale;
97 		val = clk_rate * period_ns;
98 		pv = div64_u64(val, div);
99 		val = clk_rate * duty_ns;
100 		dc = div64_u64(val, div);
101 
102 		/* if duty_ns and period_ns are not achievable then return */
103 		if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY)
104 			return -EINVAL;
105 
106 		/*
107 		 * if pv and dc have crossed their upper limit, then increase
108 		 * prescale and recalculate pv and dc.
109 		 */
110 		if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) {
111 			if (++prescale > PWMCR_MAX_PRESCALE)
112 				return -EINVAL;
113 			continue;
114 		}
115 		break;
116 	}
117 
118 	/*
119 	 * NOTE: the clock to PWM has to be enabled first before writing to the
120 	 * registers.
121 	 */
122 	ret = clk_enable(pc->clk);
123 	if (ret)
124 		return ret;
125 
126 	spear_pwm_writel(pc, pwm->hwpwm, PWMCR,
127 			prescale << PWMCR_PRESCALE_SHIFT);
128 	spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc);
129 	spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv);
130 	clk_disable(pc->clk);
131 
132 	return 0;
133 }
134 
135 static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
136 {
137 	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
138 	int rc = 0;
139 	u32 val;
140 
141 	rc = clk_enable(pc->clk);
142 	if (rc)
143 		return rc;
144 
145 	val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
146 	val |= PWMCR_PWM_ENABLE;
147 	spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
148 
149 	return 0;
150 }
151 
152 static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
153 {
154 	struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
155 	u32 val;
156 
157 	val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
158 	val &= ~PWMCR_PWM_ENABLE;
159 	spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
160 
161 	clk_disable(pc->clk);
162 }
163 
164 static int spear_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
165 			   const struct pwm_state *state)
166 {
167 	int err;
168 
169 	if (state->polarity != PWM_POLARITY_NORMAL)
170 		return -EINVAL;
171 
172 	if (!state->enabled) {
173 		if (pwm->state.enabled)
174 			spear_pwm_disable(chip, pwm);
175 		return 0;
176 	}
177 
178 	err = spear_pwm_config(chip, pwm, state->duty_cycle, state->period);
179 	if (err)
180 		return err;
181 
182 	if (!pwm->state.enabled)
183 		return spear_pwm_enable(chip, pwm);
184 
185 	return 0;
186 }
187 
188 static const struct pwm_ops spear_pwm_ops = {
189 	.apply = spear_pwm_apply,
190 };
191 
192 static int spear_pwm_probe(struct platform_device *pdev)
193 {
194 	struct device_node *np = pdev->dev.of_node;
195 	struct pwm_chip *chip;
196 	struct spear_pwm_chip *pc;
197 	int ret;
198 	u32 val;
199 
200 	chip = devm_pwmchip_alloc(&pdev->dev, NUM_PWM, sizeof(*pc));
201 	if (IS_ERR(chip))
202 		return PTR_ERR(chip);
203 	pc = to_spear_pwm_chip(chip);
204 
205 	pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
206 	if (IS_ERR(pc->mmio_base))
207 		return PTR_ERR(pc->mmio_base);
208 
209 	pc->clk = devm_clk_get_prepared(&pdev->dev, NULL);
210 	if (IS_ERR(pc->clk))
211 		return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
212 				     "Failed to get clock\n");
213 
214 	chip->ops = &spear_pwm_ops;
215 
216 	if (of_device_is_compatible(np, "st,spear1340-pwm")) {
217 		ret = clk_enable(pc->clk);
218 		if (ret)
219 			return dev_err_probe(&pdev->dev, ret,
220 					     "Failed to enable clk\n");
221 
222 		/*
223 		 * Following enables PWM chip, channels would still be
224 		 * enabled individually through their control register
225 		 */
226 		val = readl_relaxed(pc->mmio_base + PWMMCR);
227 		val |= PWMMCR_PWM_ENABLE;
228 		writel_relaxed(val, pc->mmio_base + PWMMCR);
229 
230 		clk_disable(pc->clk);
231 	}
232 
233 	ret = devm_pwmchip_add(&pdev->dev, chip);
234 	if (ret < 0)
235 		return dev_err_probe(&pdev->dev, ret, "pwmchip_add() failed\n");
236 
237 	return 0;
238 }
239 
240 static const struct of_device_id spear_pwm_of_match[] = {
241 	{ .compatible = "st,spear320-pwm" },
242 	{ .compatible = "st,spear1340-pwm" },
243 	{ }
244 };
245 
246 MODULE_DEVICE_TABLE(of, spear_pwm_of_match);
247 
248 static struct platform_driver spear_pwm_driver = {
249 	.driver = {
250 		.name = "spear-pwm",
251 		.of_match_table = spear_pwm_of_match,
252 	},
253 	.probe = spear_pwm_probe,
254 };
255 
256 module_platform_driver(spear_pwm_driver);
257 
258 MODULE_LICENSE("GPL");
259 MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
260 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
261 MODULE_ALIAS("platform:spear-pwm");
262