1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Intel Keem Bay PWM driver 4 * 5 * Copyright (C) 2020 Intel Corporation 6 * Authors: Lai Poey Seng <poey.seng.lai@intel.com> 7 * Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> 8 * 9 * Limitations: 10 * - Upon disabling a channel, the currently running 11 * period will not be completed. However, upon 12 * reconfiguration of the duty cycle/period, the 13 * currently running period will be completed first. 14 */ 15 16 #include <linux/bitfield.h> 17 #include <linux/clk.h> 18 #include <linux/io.h> 19 #include <linux/mod_devicetable.h> 20 #include <linux/module.h> 21 #include <linux/platform_device.h> 22 #include <linux/pwm.h> 23 #include <linux/regmap.h> 24 25 #define KMB_TOTAL_PWM_CHANNELS 6 26 #define KMB_PWM_COUNT_MAX U16_MAX 27 #define KMB_PWM_EN_BIT BIT(31) 28 29 /* Mask */ 30 #define KMB_PWM_HIGH_MASK GENMASK(31, 16) 31 #define KMB_PWM_LOW_MASK GENMASK(15, 0) 32 #define KMB_PWM_LEADIN_MASK GENMASK(30, 0) 33 34 /* PWM Register offset */ 35 #define KMB_PWM_LEADIN_OFFSET(ch) (0x00 + 4 * (ch)) 36 #define KMB_PWM_HIGHLOW_OFFSET(ch) (0x20 + 4 * (ch)) 37 38 struct keembay_pwm { 39 struct pwm_chip chip; 40 struct device *dev; 41 struct clk *clk; 42 void __iomem *base; 43 }; 44 45 static inline struct keembay_pwm *to_keembay_pwm_dev(struct pwm_chip *chip) 46 { 47 return container_of(chip, struct keembay_pwm, chip); 48 } 49 50 static void keembay_clk_unprepare(void *data) 51 { 52 clk_disable_unprepare(data); 53 } 54 55 static int keembay_clk_enable(struct device *dev, struct clk *clk) 56 { 57 int ret; 58 59 ret = clk_prepare_enable(clk); 60 if (ret) 61 return ret; 62 63 return devm_add_action_or_reset(dev, keembay_clk_unprepare, clk); 64 } 65 66 /* 67 * With gcc 10, CONFIG_CC_OPTIMIZE_FOR_SIZE and only "inline" instead of 68 * "__always_inline" this fails to compile because the compiler doesn't notice 69 * for all valid masks (e.g. KMB_PWM_LEADIN_MASK) that they are ok. 70 */ 71 static __always_inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask, 72 u32 val, u32 offset) 73 { 74 u32 buff = readl(priv->base + offset); 75 76 buff = u32_replace_bits(buff, val, mask); 77 writel(buff, priv->base + offset); 78 } 79 80 static void keembay_pwm_enable(struct keembay_pwm *priv, int ch) 81 { 82 keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 1, 83 KMB_PWM_LEADIN_OFFSET(ch)); 84 } 85 86 static void keembay_pwm_disable(struct keembay_pwm *priv, int ch) 87 { 88 keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 0, 89 KMB_PWM_LEADIN_OFFSET(ch)); 90 } 91 92 static int keembay_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, 93 struct pwm_state *state) 94 { 95 struct keembay_pwm *priv = to_keembay_pwm_dev(chip); 96 unsigned long long high, low; 97 unsigned long clk_rate; 98 u32 highlow; 99 100 clk_rate = clk_get_rate(priv->clk); 101 102 /* Read channel enabled status */ 103 highlow = readl(priv->base + KMB_PWM_LEADIN_OFFSET(pwm->hwpwm)); 104 if (highlow & KMB_PWM_EN_BIT) 105 state->enabled = true; 106 else 107 state->enabled = false; 108 109 /* Read period and duty cycle */ 110 highlow = readl(priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm)); 111 low = FIELD_GET(KMB_PWM_LOW_MASK, highlow) * NSEC_PER_SEC; 112 high = FIELD_GET(KMB_PWM_HIGH_MASK, highlow) * NSEC_PER_SEC; 113 state->duty_cycle = DIV_ROUND_UP_ULL(high, clk_rate); 114 state->period = DIV_ROUND_UP_ULL(high + low, clk_rate); 115 state->polarity = PWM_POLARITY_NORMAL; 116 117 return 0; 118 } 119 120 static int keembay_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 121 const struct pwm_state *state) 122 { 123 struct keembay_pwm *priv = to_keembay_pwm_dev(chip); 124 struct pwm_state current_state; 125 unsigned long long div; 126 unsigned long clk_rate; 127 u32 pwm_count = 0; 128 u16 high, low; 129 130 if (state->polarity != PWM_POLARITY_NORMAL) 131 return -EINVAL; 132 133 /* 134 * Configure the pwm repeat count as infinite at (15:0) and leadin 135 * low time as 0 at (30:16), which is in terms of clock cycles. 136 */ 137 keembay_pwm_update_bits(priv, KMB_PWM_LEADIN_MASK, 0, 138 KMB_PWM_LEADIN_OFFSET(pwm->hwpwm)); 139 140 keembay_pwm_get_state(chip, pwm, ¤t_state); 141 142 if (!state->enabled) { 143 if (current_state.enabled) 144 keembay_pwm_disable(priv, pwm->hwpwm); 145 return 0; 146 } 147 148 /* 149 * The upper 16 bits and lower 16 bits of the KMB_PWM_HIGHLOW_OFFSET 150 * register contain the high time and low time of waveform accordingly. 151 * All the values are in terms of clock cycles. 152 */ 153 154 clk_rate = clk_get_rate(priv->clk); 155 div = clk_rate * state->duty_cycle; 156 div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC); 157 if (div > KMB_PWM_COUNT_MAX) 158 return -ERANGE; 159 160 high = div; 161 div = clk_rate * state->period; 162 div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC); 163 div = div - high; 164 if (div > KMB_PWM_COUNT_MAX) 165 return -ERANGE; 166 167 low = div; 168 169 pwm_count = FIELD_PREP(KMB_PWM_HIGH_MASK, high) | 170 FIELD_PREP(KMB_PWM_LOW_MASK, low); 171 172 writel(pwm_count, priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm)); 173 174 if (state->enabled && !current_state.enabled) 175 keembay_pwm_enable(priv, pwm->hwpwm); 176 177 return 0; 178 } 179 180 static const struct pwm_ops keembay_pwm_ops = { 181 .owner = THIS_MODULE, 182 .apply = keembay_pwm_apply, 183 .get_state = keembay_pwm_get_state, 184 }; 185 186 static int keembay_pwm_probe(struct platform_device *pdev) 187 { 188 struct device *dev = &pdev->dev; 189 struct keembay_pwm *priv; 190 int ret; 191 192 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 193 if (!priv) 194 return -ENOMEM; 195 196 priv->clk = devm_clk_get(dev, NULL); 197 if (IS_ERR(priv->clk)) 198 return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get clock\n"); 199 200 priv->base = devm_platform_ioremap_resource(pdev, 0); 201 if (IS_ERR(priv->base)) 202 return PTR_ERR(priv->base); 203 204 ret = keembay_clk_enable(dev, priv->clk); 205 if (ret) 206 return ret; 207 208 priv->chip.dev = dev; 209 priv->chip.ops = &keembay_pwm_ops; 210 priv->chip.npwm = KMB_TOTAL_PWM_CHANNELS; 211 212 ret = devm_pwmchip_add(dev, &priv->chip); 213 if (ret) 214 return dev_err_probe(dev, ret, "Failed to add PWM chip\n"); 215 216 return 0; 217 } 218 219 static const struct of_device_id keembay_pwm_of_match[] = { 220 { .compatible = "intel,keembay-pwm" }, 221 { } 222 }; 223 MODULE_DEVICE_TABLE(of, keembay_pwm_of_match); 224 225 static struct platform_driver keembay_pwm_driver = { 226 .probe = keembay_pwm_probe, 227 .driver = { 228 .name = "pwm-keembay", 229 .of_match_table = keembay_pwm_of_match, 230 }, 231 }; 232 module_platform_driver(keembay_pwm_driver); 233 234 MODULE_ALIAS("platform:pwm-keembay"); 235 MODULE_DESCRIPTION("Intel Keem Bay PWM driver"); 236 MODULE_LICENSE("GPL v2"); 237