xref: /linux/drivers/pwm/pwm-imx27.c (revision f7af616c632ee2ac3af0876fe33bf9e0232e665a)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * simple driver for PWM (Pulse Width Modulator) controller
4  *
5  * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
6  *
7  * Limitations:
8  * - When disabled the output is driven to 0 independent of the configured
9  *   polarity.
10  */
11 
12 #include <linux/bitfield.h>
13 #include <linux/bitops.h>
14 #include <linux/clk.h>
15 #include <linux/delay.h>
16 #include <linux/err.h>
17 #include <linux/io.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/of.h>
21 #include <linux/platform_device.h>
22 #include <linux/pwm.h>
23 #include <linux/slab.h>
24 
25 #define MX3_PWMCR			0x00    /* PWM Control Register */
26 #define MX3_PWMSR			0x04    /* PWM Status Register */
27 #define MX3_PWMSAR			0x0C    /* PWM Sample Register */
28 #define MX3_PWMPR			0x10    /* PWM Period Register */
29 
30 #define MX3_PWMCR_FWM			GENMASK(27, 26)
31 #define MX3_PWMCR_STOPEN		BIT(25)
32 #define MX3_PWMCR_DOZEN			BIT(24)
33 #define MX3_PWMCR_WAITEN		BIT(23)
34 #define MX3_PWMCR_DBGEN			BIT(22)
35 #define MX3_PWMCR_BCTR			BIT(21)
36 #define MX3_PWMCR_HCTR			BIT(20)
37 
38 #define MX3_PWMCR_POUTC			GENMASK(19, 18)
39 #define MX3_PWMCR_POUTC_NORMAL		0
40 #define MX3_PWMCR_POUTC_INVERTED	1
41 #define MX3_PWMCR_POUTC_OFF		2
42 
43 #define MX3_PWMCR_CLKSRC		GENMASK(17, 16)
44 #define MX3_PWMCR_CLKSRC_OFF		0
45 #define MX3_PWMCR_CLKSRC_IPG		1
46 #define MX3_PWMCR_CLKSRC_IPG_HIGH	2
47 #define MX3_PWMCR_CLKSRC_IPG_32K	3
48 
49 #define MX3_PWMCR_PRESCALER		GENMASK(15, 4)
50 
51 #define MX3_PWMCR_SWR			BIT(3)
52 
53 #define MX3_PWMCR_REPEAT		GENMASK(2, 1)
54 #define MX3_PWMCR_REPEAT_1X		0
55 #define MX3_PWMCR_REPEAT_2X		1
56 #define MX3_PWMCR_REPEAT_4X		2
57 #define MX3_PWMCR_REPEAT_8X		3
58 
59 #define MX3_PWMCR_EN			BIT(0)
60 
61 #define MX3_PWMSR_FWE			BIT(6)
62 #define MX3_PWMSR_CMP			BIT(5)
63 #define MX3_PWMSR_ROV			BIT(4)
64 #define MX3_PWMSR_FE			BIT(3)
65 
66 #define MX3_PWMSR_FIFOAV		GENMASK(2, 0)
67 #define MX3_PWMSR_FIFOAV_EMPTY		0
68 #define MX3_PWMSR_FIFOAV_1WORD		1
69 #define MX3_PWMSR_FIFOAV_2WORDS		2
70 #define MX3_PWMSR_FIFOAV_3WORDS		3
71 #define MX3_PWMSR_FIFOAV_4WORDS		4
72 
73 #define MX3_PWMCR_PRESCALER_SET(x)	FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
74 #define MX3_PWMCR_PRESCALER_GET(x)	(FIELD_GET(MX3_PWMCR_PRESCALER, \
75 						   (x)) + 1)
76 
77 #define MX3_PWM_SWR_LOOP		5
78 
79 /* PWMPR register value of 0xffff has the same effect as 0xfffe */
80 #define MX3_PWMPR_MAX			0xfffe
81 
82 struct pwm_imx27_chip {
83 	struct clk	*clk_ipg;
84 	struct clk	*clk_per;
85 	void __iomem	*mmio_base;
86 	struct pwm_chip	chip;
87 
88 	/*
89 	 * The driver cannot read the current duty cycle from the hardware if
90 	 * the hardware is disabled. Cache the last programmed duty cycle
91 	 * value to return in that case.
92 	 */
93 	unsigned int duty_cycle;
94 };
95 
96 #define to_pwm_imx27_chip(chip)	container_of(chip, struct pwm_imx27_chip, chip)
97 
98 static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx)
99 {
100 	int ret;
101 
102 	ret = clk_prepare_enable(imx->clk_ipg);
103 	if (ret)
104 		return ret;
105 
106 	ret = clk_prepare_enable(imx->clk_per);
107 	if (ret) {
108 		clk_disable_unprepare(imx->clk_ipg);
109 		return ret;
110 	}
111 
112 	return 0;
113 }
114 
115 static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx)
116 {
117 	clk_disable_unprepare(imx->clk_per);
118 	clk_disable_unprepare(imx->clk_ipg);
119 }
120 
121 static void pwm_imx27_get_state(struct pwm_chip *chip,
122 				struct pwm_device *pwm, struct pwm_state *state)
123 {
124 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
125 	u32 period, prescaler, pwm_clk, val;
126 	u64 tmp;
127 	int ret;
128 
129 	ret = pwm_imx27_clk_prepare_enable(imx);
130 	if (ret < 0)
131 		return;
132 
133 	val = readl(imx->mmio_base + MX3_PWMCR);
134 
135 	if (val & MX3_PWMCR_EN)
136 		state->enabled = true;
137 	else
138 		state->enabled = false;
139 
140 	switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
141 	case MX3_PWMCR_POUTC_NORMAL:
142 		state->polarity = PWM_POLARITY_NORMAL;
143 		break;
144 	case MX3_PWMCR_POUTC_INVERTED:
145 		state->polarity = PWM_POLARITY_INVERSED;
146 		break;
147 	default:
148 		dev_warn(chip->dev, "can't set polarity, output disconnected");
149 	}
150 
151 	prescaler = MX3_PWMCR_PRESCALER_GET(val);
152 	pwm_clk = clk_get_rate(imx->clk_per);
153 	val = readl(imx->mmio_base + MX3_PWMPR);
154 	period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
155 
156 	/* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
157 	tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler;
158 	state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk);
159 
160 	/*
161 	 * PWMSAR can be read only if PWM is enabled. If the PWM is disabled,
162 	 * use the cached value.
163 	 */
164 	if (state->enabled)
165 		val = readl(imx->mmio_base + MX3_PWMSAR);
166 	else
167 		val = imx->duty_cycle;
168 
169 	tmp = NSEC_PER_SEC * (u64)(val) * prescaler;
170 	state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk);
171 
172 	pwm_imx27_clk_disable_unprepare(imx);
173 }
174 
175 static void pwm_imx27_sw_reset(struct pwm_chip *chip)
176 {
177 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
178 	struct device *dev = chip->dev;
179 	int wait_count = 0;
180 	u32 cr;
181 
182 	writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
183 	do {
184 		usleep_range(200, 1000);
185 		cr = readl(imx->mmio_base + MX3_PWMCR);
186 	} while ((cr & MX3_PWMCR_SWR) &&
187 		 (wait_count++ < MX3_PWM_SWR_LOOP));
188 
189 	if (cr & MX3_PWMCR_SWR)
190 		dev_warn(dev, "software reset timeout\n");
191 }
192 
193 static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
194 				     struct pwm_device *pwm)
195 {
196 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
197 	struct device *dev = chip->dev;
198 	unsigned int period_ms;
199 	int fifoav;
200 	u32 sr;
201 
202 	sr = readl(imx->mmio_base + MX3_PWMSR);
203 	fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
204 	if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
205 		period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm),
206 					 NSEC_PER_MSEC);
207 		msleep(period_ms);
208 
209 		sr = readl(imx->mmio_base + MX3_PWMSR);
210 		if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
211 			dev_warn(dev, "there is no free FIFO slot\n");
212 	}
213 }
214 
215 static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
216 			   const struct pwm_state *state)
217 {
218 	unsigned long period_cycles, duty_cycles, prescale;
219 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
220 	struct pwm_state cstate;
221 	unsigned long long c;
222 	unsigned long long clkrate;
223 	int ret;
224 	u32 cr;
225 
226 	pwm_get_state(pwm, &cstate);
227 
228 	clkrate = clk_get_rate(imx->clk_per);
229 	c = clkrate * state->period;
230 
231 	do_div(c, NSEC_PER_SEC);
232 	period_cycles = c;
233 
234 	prescale = period_cycles / 0x10000 + 1;
235 
236 	period_cycles /= prescale;
237 	c = clkrate * state->duty_cycle;
238 	do_div(c, NSEC_PER_SEC);
239 	duty_cycles = c;
240 	duty_cycles /= prescale;
241 
242 	/*
243 	 * according to imx pwm RM, the real period value should be PERIOD
244 	 * value in PWMPR plus 2.
245 	 */
246 	if (period_cycles > 2)
247 		period_cycles -= 2;
248 	else
249 		period_cycles = 0;
250 
251 	/*
252 	 * Wait for a free FIFO slot if the PWM is already enabled, and flush
253 	 * the FIFO if the PWM was disabled and is about to be enabled.
254 	 */
255 	if (cstate.enabled) {
256 		pwm_imx27_wait_fifo_slot(chip, pwm);
257 	} else {
258 		ret = pwm_imx27_clk_prepare_enable(imx);
259 		if (ret)
260 			return ret;
261 
262 		pwm_imx27_sw_reset(chip);
263 	}
264 
265 	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
266 	writel(period_cycles, imx->mmio_base + MX3_PWMPR);
267 
268 	/*
269 	 * Store the duty cycle for future reference in cases where the
270 	 * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled).
271 	 */
272 	imx->duty_cycle = duty_cycles;
273 
274 	cr = MX3_PWMCR_PRESCALER_SET(prescale) |
275 	     MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
276 	     FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
277 	     MX3_PWMCR_DBGEN;
278 
279 	if (state->polarity == PWM_POLARITY_INVERSED)
280 		cr |= FIELD_PREP(MX3_PWMCR_POUTC,
281 				MX3_PWMCR_POUTC_INVERTED);
282 
283 	if (state->enabled)
284 		cr |= MX3_PWMCR_EN;
285 
286 	writel(cr, imx->mmio_base + MX3_PWMCR);
287 
288 	if (!state->enabled)
289 		pwm_imx27_clk_disable_unprepare(imx);
290 
291 	return 0;
292 }
293 
294 static const struct pwm_ops pwm_imx27_ops = {
295 	.apply = pwm_imx27_apply,
296 	.get_state = pwm_imx27_get_state,
297 	.owner = THIS_MODULE,
298 };
299 
300 static const struct of_device_id pwm_imx27_dt_ids[] = {
301 	{ .compatible = "fsl,imx27-pwm", },
302 	{ /* sentinel */ }
303 };
304 MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
305 
306 static int pwm_imx27_probe(struct platform_device *pdev)
307 {
308 	struct pwm_imx27_chip *imx;
309 	int ret;
310 	u32 pwmcr;
311 
312 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
313 	if (imx == NULL)
314 		return -ENOMEM;
315 
316 	platform_set_drvdata(pdev, imx);
317 
318 	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
319 	if (IS_ERR(imx->clk_ipg))
320 		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
321 				     "getting ipg clock failed\n");
322 
323 	imx->clk_per = devm_clk_get(&pdev->dev, "per");
324 	if (IS_ERR(imx->clk_per))
325 		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
326 				     "failed to get peripheral clock\n");
327 
328 	imx->chip.ops = &pwm_imx27_ops;
329 	imx->chip.dev = &pdev->dev;
330 	imx->chip.npwm = 1;
331 
332 	imx->chip.of_xlate = of_pwm_xlate_with_flags;
333 	imx->chip.of_pwm_n_cells = 3;
334 
335 	imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
336 	if (IS_ERR(imx->mmio_base))
337 		return PTR_ERR(imx->mmio_base);
338 
339 	ret = pwm_imx27_clk_prepare_enable(imx);
340 	if (ret)
341 		return ret;
342 
343 	/* keep clks on if pwm is running */
344 	pwmcr = readl(imx->mmio_base + MX3_PWMCR);
345 	if (!(pwmcr & MX3_PWMCR_EN))
346 		pwm_imx27_clk_disable_unprepare(imx);
347 
348 	return pwmchip_add(&imx->chip);
349 }
350 
351 static int pwm_imx27_remove(struct platform_device *pdev)
352 {
353 	struct pwm_imx27_chip *imx;
354 
355 	imx = platform_get_drvdata(pdev);
356 
357 	return pwmchip_remove(&imx->chip);
358 }
359 
360 static struct platform_driver imx_pwm_driver = {
361 	.driver = {
362 		.name = "pwm-imx27",
363 		.of_match_table = pwm_imx27_dt_ids,
364 	},
365 	.probe = pwm_imx27_probe,
366 	.remove = pwm_imx27_remove,
367 };
368 module_platform_driver(imx_pwm_driver);
369 
370 MODULE_LICENSE("GPL v2");
371 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
372