1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * simple driver for PWM (Pulse Width Modulator) controller 4 * 5 * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> 6 * 7 * Limitations: 8 * - When disabled the output is driven to 0 independent of the configured 9 * polarity. 10 */ 11 12 #include <linux/bitfield.h> 13 #include <linux/bitops.h> 14 #include <linux/clk.h> 15 #include <linux/delay.h> 16 #include <linux/err.h> 17 #include <linux/io.h> 18 #include <linux/kernel.h> 19 #include <linux/module.h> 20 #include <linux/of.h> 21 #include <linux/platform_device.h> 22 #include <linux/pwm.h> 23 #include <linux/slab.h> 24 25 #define MX3_PWMCR 0x00 /* PWM Control Register */ 26 #define MX3_PWMSR 0x04 /* PWM Status Register */ 27 #define MX3_PWMSAR 0x0C /* PWM Sample Register */ 28 #define MX3_PWMPR 0x10 /* PWM Period Register */ 29 30 #define MX3_PWMCR_FWM GENMASK(27, 26) 31 #define MX3_PWMCR_STOPEN BIT(25) 32 #define MX3_PWMCR_DOZEN BIT(24) 33 #define MX3_PWMCR_WAITEN BIT(23) 34 #define MX3_PWMCR_DBGEN BIT(22) 35 #define MX3_PWMCR_BCTR BIT(21) 36 #define MX3_PWMCR_HCTR BIT(20) 37 38 #define MX3_PWMCR_POUTC GENMASK(19, 18) 39 #define MX3_PWMCR_POUTC_NORMAL 0 40 #define MX3_PWMCR_POUTC_INVERTED 1 41 #define MX3_PWMCR_POUTC_OFF 2 42 43 #define MX3_PWMCR_CLKSRC GENMASK(17, 16) 44 #define MX3_PWMCR_CLKSRC_OFF 0 45 #define MX3_PWMCR_CLKSRC_IPG 1 46 #define MX3_PWMCR_CLKSRC_IPG_HIGH 2 47 #define MX3_PWMCR_CLKSRC_IPG_32K 3 48 49 #define MX3_PWMCR_PRESCALER GENMASK(15, 4) 50 51 #define MX3_PWMCR_SWR BIT(3) 52 53 #define MX3_PWMCR_REPEAT GENMASK(2, 1) 54 #define MX3_PWMCR_REPEAT_1X 0 55 #define MX3_PWMCR_REPEAT_2X 1 56 #define MX3_PWMCR_REPEAT_4X 2 57 #define MX3_PWMCR_REPEAT_8X 3 58 59 #define MX3_PWMCR_EN BIT(0) 60 61 #define MX3_PWMSR_FWE BIT(6) 62 #define MX3_PWMSR_CMP BIT(5) 63 #define MX3_PWMSR_ROV BIT(4) 64 #define MX3_PWMSR_FE BIT(3) 65 66 #define MX3_PWMSR_FIFOAV GENMASK(2, 0) 67 #define MX3_PWMSR_FIFOAV_EMPTY 0 68 #define MX3_PWMSR_FIFOAV_1WORD 1 69 #define MX3_PWMSR_FIFOAV_2WORDS 2 70 #define MX3_PWMSR_FIFOAV_3WORDS 3 71 #define MX3_PWMSR_FIFOAV_4WORDS 4 72 73 #define MX3_PWMCR_PRESCALER_SET(x) FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1) 74 #define MX3_PWMCR_PRESCALER_GET(x) (FIELD_GET(MX3_PWMCR_PRESCALER, \ 75 (x)) + 1) 76 77 #define MX3_PWM_SWR_LOOP 5 78 79 /* PWMPR register value of 0xffff has the same effect as 0xfffe */ 80 #define MX3_PWMPR_MAX 0xfffe 81 82 struct pwm_imx27_chip { 83 struct clk *clk_ipg; 84 struct clk *clk_per; 85 void __iomem *mmio_base; 86 struct pwm_chip chip; 87 88 /* 89 * The driver cannot read the current duty cycle from the hardware if 90 * the hardware is disabled. Cache the last programmed duty cycle 91 * value to return in that case. 92 */ 93 unsigned int duty_cycle; 94 }; 95 96 #define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip) 97 98 static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx) 99 { 100 int ret; 101 102 ret = clk_prepare_enable(imx->clk_ipg); 103 if (ret) 104 return ret; 105 106 ret = clk_prepare_enable(imx->clk_per); 107 if (ret) { 108 clk_disable_unprepare(imx->clk_ipg); 109 return ret; 110 } 111 112 return 0; 113 } 114 115 static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx) 116 { 117 clk_disable_unprepare(imx->clk_per); 118 clk_disable_unprepare(imx->clk_ipg); 119 } 120 121 static int pwm_imx27_get_state(struct pwm_chip *chip, 122 struct pwm_device *pwm, struct pwm_state *state) 123 { 124 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); 125 u32 period, prescaler, pwm_clk, val; 126 u64 tmp; 127 int ret; 128 129 ret = pwm_imx27_clk_prepare_enable(imx); 130 if (ret < 0) 131 return ret; 132 133 val = readl(imx->mmio_base + MX3_PWMCR); 134 135 if (val & MX3_PWMCR_EN) 136 state->enabled = true; 137 else 138 state->enabled = false; 139 140 switch (FIELD_GET(MX3_PWMCR_POUTC, val)) { 141 case MX3_PWMCR_POUTC_NORMAL: 142 state->polarity = PWM_POLARITY_NORMAL; 143 break; 144 case MX3_PWMCR_POUTC_INVERTED: 145 state->polarity = PWM_POLARITY_INVERSED; 146 break; 147 default: 148 dev_warn(chip->dev, "can't set polarity, output disconnected"); 149 } 150 151 prescaler = MX3_PWMCR_PRESCALER_GET(val); 152 pwm_clk = clk_get_rate(imx->clk_per); 153 val = readl(imx->mmio_base + MX3_PWMPR); 154 period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val; 155 156 /* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */ 157 tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler; 158 state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk); 159 160 /* 161 * PWMSAR can be read only if PWM is enabled. If the PWM is disabled, 162 * use the cached value. 163 */ 164 if (state->enabled) 165 val = readl(imx->mmio_base + MX3_PWMSAR); 166 else 167 val = imx->duty_cycle; 168 169 tmp = NSEC_PER_SEC * (u64)(val) * prescaler; 170 state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk); 171 172 pwm_imx27_clk_disable_unprepare(imx); 173 174 return 0; 175 } 176 177 static void pwm_imx27_sw_reset(struct pwm_chip *chip) 178 { 179 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); 180 struct device *dev = chip->dev; 181 int wait_count = 0; 182 u32 cr; 183 184 writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR); 185 do { 186 usleep_range(200, 1000); 187 cr = readl(imx->mmio_base + MX3_PWMCR); 188 } while ((cr & MX3_PWMCR_SWR) && 189 (wait_count++ < MX3_PWM_SWR_LOOP)); 190 191 if (cr & MX3_PWMCR_SWR) 192 dev_warn(dev, "software reset timeout\n"); 193 } 194 195 static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip, 196 struct pwm_device *pwm) 197 { 198 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); 199 struct device *dev = chip->dev; 200 unsigned int period_ms; 201 int fifoav; 202 u32 sr; 203 204 sr = readl(imx->mmio_base + MX3_PWMSR); 205 fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr); 206 if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) { 207 period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm), 208 NSEC_PER_MSEC); 209 msleep(period_ms); 210 211 sr = readl(imx->mmio_base + MX3_PWMSR); 212 if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr)) 213 dev_warn(dev, "there is no free FIFO slot\n"); 214 } 215 } 216 217 static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm, 218 const struct pwm_state *state) 219 { 220 unsigned long period_cycles, duty_cycles, prescale; 221 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); 222 struct pwm_state cstate; 223 unsigned long long c; 224 unsigned long long clkrate; 225 int ret; 226 u32 cr; 227 228 pwm_get_state(pwm, &cstate); 229 230 clkrate = clk_get_rate(imx->clk_per); 231 c = clkrate * state->period; 232 233 do_div(c, NSEC_PER_SEC); 234 period_cycles = c; 235 236 prescale = period_cycles / 0x10000 + 1; 237 238 period_cycles /= prescale; 239 c = clkrate * state->duty_cycle; 240 do_div(c, NSEC_PER_SEC); 241 duty_cycles = c; 242 duty_cycles /= prescale; 243 244 /* 245 * according to imx pwm RM, the real period value should be PERIOD 246 * value in PWMPR plus 2. 247 */ 248 if (period_cycles > 2) 249 period_cycles -= 2; 250 else 251 period_cycles = 0; 252 253 /* 254 * Wait for a free FIFO slot if the PWM is already enabled, and flush 255 * the FIFO if the PWM was disabled and is about to be enabled. 256 */ 257 if (cstate.enabled) { 258 pwm_imx27_wait_fifo_slot(chip, pwm); 259 } else { 260 ret = pwm_imx27_clk_prepare_enable(imx); 261 if (ret) 262 return ret; 263 264 pwm_imx27_sw_reset(chip); 265 } 266 267 writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); 268 writel(period_cycles, imx->mmio_base + MX3_PWMPR); 269 270 /* 271 * Store the duty cycle for future reference in cases where the 272 * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled). 273 */ 274 imx->duty_cycle = duty_cycles; 275 276 cr = MX3_PWMCR_PRESCALER_SET(prescale) | 277 MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN | 278 FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) | 279 MX3_PWMCR_DBGEN; 280 281 if (state->polarity == PWM_POLARITY_INVERSED) 282 cr |= FIELD_PREP(MX3_PWMCR_POUTC, 283 MX3_PWMCR_POUTC_INVERTED); 284 285 if (state->enabled) 286 cr |= MX3_PWMCR_EN; 287 288 writel(cr, imx->mmio_base + MX3_PWMCR); 289 290 if (!state->enabled) 291 pwm_imx27_clk_disable_unprepare(imx); 292 293 return 0; 294 } 295 296 static const struct pwm_ops pwm_imx27_ops = { 297 .apply = pwm_imx27_apply, 298 .get_state = pwm_imx27_get_state, 299 }; 300 301 static const struct of_device_id pwm_imx27_dt_ids[] = { 302 { .compatible = "fsl,imx27-pwm", }, 303 { /* sentinel */ } 304 }; 305 MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids); 306 307 static int pwm_imx27_probe(struct platform_device *pdev) 308 { 309 struct pwm_imx27_chip *imx; 310 int ret; 311 u32 pwmcr; 312 313 imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL); 314 if (imx == NULL) 315 return -ENOMEM; 316 317 imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); 318 if (IS_ERR(imx->clk_ipg)) 319 return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg), 320 "getting ipg clock failed\n"); 321 322 imx->clk_per = devm_clk_get(&pdev->dev, "per"); 323 if (IS_ERR(imx->clk_per)) 324 return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per), 325 "failed to get peripheral clock\n"); 326 327 imx->chip.ops = &pwm_imx27_ops; 328 imx->chip.dev = &pdev->dev; 329 imx->chip.npwm = 1; 330 331 imx->mmio_base = devm_platform_ioremap_resource(pdev, 0); 332 if (IS_ERR(imx->mmio_base)) 333 return PTR_ERR(imx->mmio_base); 334 335 ret = pwm_imx27_clk_prepare_enable(imx); 336 if (ret) 337 return ret; 338 339 /* keep clks on if pwm is running */ 340 pwmcr = readl(imx->mmio_base + MX3_PWMCR); 341 if (!(pwmcr & MX3_PWMCR_EN)) 342 pwm_imx27_clk_disable_unprepare(imx); 343 344 return devm_pwmchip_add(&pdev->dev, &imx->chip); 345 } 346 347 static struct platform_driver imx_pwm_driver = { 348 .driver = { 349 .name = "pwm-imx27", 350 .of_match_table = pwm_imx27_dt_ids, 351 }, 352 .probe = pwm_imx27_probe, 353 }; 354 module_platform_driver(imx_pwm_driver); 355 356 MODULE_LICENSE("GPL v2"); 357 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); 358