xref: /linux/drivers/pwm/pwm-clk.c (revision 89df62c3ca1746177e5f1bae540b6b85c27aadcd)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Clock based PWM controller
4  *
5  * Copyright (c) 2021 Nikita Travkin <nikita@trvn.ru>
6  *
7  * This is an "adapter" driver that allows PWM consumers to use
8  * system clocks with duty cycle control as PWM outputs.
9  *
10  * Limitations:
11  * - Due to the fact that exact behavior depends on the underlying
12  *   clock driver, various limitations are possible.
13  * - Underlying clock may not be able to give 0% or 100% duty cycle
14  *   (constant off or on), exact behavior will depend on the clock.
15  * - When the PWM is disabled, the clock will be disabled as well,
16  *   line state will depend on the clock.
17  * - The clk API doesn't expose the necessary calls to implement
18  *   .get_state().
19  */
20 
21 #include <linux/kernel.h>
22 #include <linux/math64.h>
23 #include <linux/err.h>
24 #include <linux/module.h>
25 #include <linux/of.h>
26 #include <linux/platform_device.h>
27 #include <linux/clk.h>
28 #include <linux/pwm.h>
29 
30 struct pwm_clk_chip {
31 	struct pwm_chip chip;
32 	struct clk *clk;
33 	bool clk_enabled;
34 };
35 
36 #define to_pwm_clk_chip(_chip) container_of(_chip, struct pwm_clk_chip, chip)
37 
38 static int pwm_clk_apply(struct pwm_chip *chip, struct pwm_device *pwm,
39 			 const struct pwm_state *state)
40 {
41 	struct pwm_clk_chip *pcchip = to_pwm_clk_chip(chip);
42 	int ret;
43 	u32 rate;
44 	u64 period = state->period;
45 	u64 duty_cycle = state->duty_cycle;
46 
47 	if (!state->enabled) {
48 		if (pwm->state.enabled) {
49 			clk_disable(pcchip->clk);
50 			pcchip->clk_enabled = false;
51 		}
52 		return 0;
53 	} else if (!pwm->state.enabled) {
54 		ret = clk_enable(pcchip->clk);
55 		if (ret)
56 			return ret;
57 		pcchip->clk_enabled = true;
58 	}
59 
60 	/*
61 	 * We have to enable the clk before setting the rate and duty_cycle,
62 	 * that however results in a window where the clk is on with a
63 	 * (potentially) different setting. Also setting period and duty_cycle
64 	 * are two separate calls, so that probably isn't atomic either.
65 	 */
66 
67 	rate = DIV64_U64_ROUND_UP(NSEC_PER_SEC, period);
68 	ret = clk_set_rate(pcchip->clk, rate);
69 	if (ret)
70 		return ret;
71 
72 	if (state->polarity == PWM_POLARITY_INVERSED)
73 		duty_cycle = period - duty_cycle;
74 
75 	return clk_set_duty_cycle(pcchip->clk, duty_cycle, period);
76 }
77 
78 static const struct pwm_ops pwm_clk_ops = {
79 	.apply = pwm_clk_apply,
80 	.owner = THIS_MODULE,
81 };
82 
83 static int pwm_clk_probe(struct platform_device *pdev)
84 {
85 	struct pwm_clk_chip *pcchip;
86 	int ret;
87 
88 	pcchip = devm_kzalloc(&pdev->dev, sizeof(*pcchip), GFP_KERNEL);
89 	if (!pcchip)
90 		return -ENOMEM;
91 
92 	pcchip->clk = devm_clk_get(&pdev->dev, NULL);
93 	if (IS_ERR(pcchip->clk))
94 		return dev_err_probe(&pdev->dev, PTR_ERR(pcchip->clk),
95 				     "Failed to get clock\n");
96 
97 	pcchip->chip.dev = &pdev->dev;
98 	pcchip->chip.ops = &pwm_clk_ops;
99 	pcchip->chip.npwm = 1;
100 
101 	ret = clk_prepare(pcchip->clk);
102 	if (ret < 0)
103 		return dev_err_probe(&pdev->dev, ret, "Failed to prepare clock\n");
104 
105 	ret = pwmchip_add(&pcchip->chip);
106 	if (ret < 0) {
107 		clk_unprepare(pcchip->clk);
108 		return dev_err_probe(&pdev->dev, ret, "Failed to add pwm chip\n");
109 	}
110 
111 	platform_set_drvdata(pdev, pcchip);
112 	return 0;
113 }
114 
115 static void pwm_clk_remove(struct platform_device *pdev)
116 {
117 	struct pwm_clk_chip *pcchip = platform_get_drvdata(pdev);
118 
119 	pwmchip_remove(&pcchip->chip);
120 
121 	if (pcchip->clk_enabled)
122 		clk_disable(pcchip->clk);
123 
124 	clk_unprepare(pcchip->clk);
125 }
126 
127 static const struct of_device_id pwm_clk_dt_ids[] = {
128 	{ .compatible = "clk-pwm", },
129 	{ /* sentinel */ }
130 };
131 MODULE_DEVICE_TABLE(of, pwm_clk_dt_ids);
132 
133 static struct platform_driver pwm_clk_driver = {
134 	.driver = {
135 		.name = "pwm-clk",
136 		.of_match_table = pwm_clk_dt_ids,
137 	},
138 	.probe = pwm_clk_probe,
139 	.remove_new = pwm_clk_remove,
140 };
141 module_platform_driver(pwm_clk_driver);
142 
143 MODULE_ALIAS("platform:pwm-clk");
144 MODULE_AUTHOR("Nikita Travkin <nikita@trvn.ru>");
145 MODULE_DESCRIPTION("Clock based PWM driver");
146 MODULE_LICENSE("GPL");
147