1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Broadcom BCM7038 PWM driver 4 * Author: Florian Fainelli 5 * 6 * Copyright (C) 2015 Broadcom Corporation 7 */ 8 9 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 10 11 #include <linux/clk.h> 12 #include <linux/export.h> 13 #include <linux/init.h> 14 #include <linux/io.h> 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/of.h> 18 #include <linux/platform_device.h> 19 #include <linux/pwm.h> 20 #include <linux/spinlock.h> 21 22 #define PWM_CTRL 0x00 23 #define CTRL_START BIT(0) 24 #define CTRL_OEB BIT(1) 25 #define CTRL_FORCE_HIGH BIT(2) 26 #define CTRL_OPENDRAIN BIT(3) 27 #define CTRL_CHAN_OFFS 4 28 29 #define PWM_CTRL2 0x04 30 #define CTRL2_OUT_SELECT BIT(0) 31 32 #define PWM_CH_SIZE 0x8 33 34 #define PWM_CWORD_MSB(ch) (0x08 + ((ch) * PWM_CH_SIZE)) 35 #define PWM_CWORD_LSB(ch) (0x0c + ((ch) * PWM_CH_SIZE)) 36 37 /* Number of bits for the CWORD value */ 38 #define CWORD_BIT_SIZE 16 39 40 /* 41 * Maximum control word value allowed when variable-frequency PWM is used as a 42 * clock for the constant-frequency PMW. 43 */ 44 #define CONST_VAR_F_MAX 32768 45 #define CONST_VAR_F_MIN 1 46 47 #define PWM_ON(ch) (0x18 + ((ch) * PWM_CH_SIZE)) 48 #define PWM_ON_MIN 1 49 #define PWM_PERIOD(ch) (0x1c + ((ch) * PWM_CH_SIZE)) 50 #define PWM_PERIOD_MIN 0 51 52 #define PWM_ON_PERIOD_MAX 0xff 53 54 struct brcmstb_pwm { 55 void __iomem *base; 56 struct clk *clk; 57 struct pwm_chip chip; 58 }; 59 60 static inline u32 brcmstb_pwm_readl(struct brcmstb_pwm *p, 61 unsigned int offset) 62 { 63 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) 64 return __raw_readl(p->base + offset); 65 else 66 return readl_relaxed(p->base + offset); 67 } 68 69 static inline void brcmstb_pwm_writel(struct brcmstb_pwm *p, u32 value, 70 unsigned int offset) 71 { 72 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) 73 __raw_writel(value, p->base + offset); 74 else 75 writel_relaxed(value, p->base + offset); 76 } 77 78 static inline struct brcmstb_pwm *to_brcmstb_pwm(struct pwm_chip *chip) 79 { 80 return container_of(chip, struct brcmstb_pwm, chip); 81 } 82 83 /* 84 * Fv is derived from the variable frequency output. The variable frequency 85 * output is configured using this formula: 86 * 87 * W = cword, if cword < 2 ^ 15 else 16-bit 2's complement of cword 88 * 89 * Fv = W x 2 ^ -16 x 27Mhz (reference clock) 90 * 91 * The period is: (period + 1) / Fv and "on" time is on / (period + 1) 92 * 93 * The PWM core framework specifies that the "duty_ns" parameter is in fact the 94 * "on" time, so this translates directly into our HW programming here. 95 */ 96 static int brcmstb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, 97 u64 duty_ns, u64 period_ns) 98 { 99 struct brcmstb_pwm *p = to_brcmstb_pwm(chip); 100 unsigned long pc, dc, cword = CONST_VAR_F_MAX; 101 unsigned int channel = pwm->hwpwm; 102 u32 value; 103 104 /* 105 * If asking for a duty_ns equal to period_ns, we need to substract 106 * the period value by 1 to make it shorter than the "on" time and 107 * produce a flat 100% duty cycle signal, and max out the "on" time 108 */ 109 if (duty_ns == period_ns) { 110 dc = PWM_ON_PERIOD_MAX; 111 pc = PWM_ON_PERIOD_MAX - 1; 112 goto done; 113 } 114 115 while (1) { 116 u64 rate; 117 118 /* 119 * Calculate the base rate from base frequency and current 120 * cword 121 */ 122 rate = (u64)clk_get_rate(p->clk) * (u64)cword; 123 rate >>= CWORD_BIT_SIZE; 124 125 pc = mul_u64_u64_div_u64(period_ns, rate, NSEC_PER_SEC); 126 dc = mul_u64_u64_div_u64(duty_ns + 1, rate, NSEC_PER_SEC); 127 128 /* 129 * We can be called with separate duty and period updates, 130 * so do not reject dc == 0 right away 131 */ 132 if (pc == PWM_PERIOD_MIN || (dc < PWM_ON_MIN && duty_ns)) 133 return -EINVAL; 134 135 /* We converged on a calculation */ 136 if (pc <= PWM_ON_PERIOD_MAX && dc <= PWM_ON_PERIOD_MAX) 137 break; 138 139 /* 140 * The cword needs to be a power of 2 for the variable 141 * frequency generator to output a 50% duty cycle variable 142 * frequency which is used as input clock to the fixed 143 * frequency generator. 144 */ 145 cword >>= 1; 146 147 /* 148 * Desired periods are too large, we do not have a divider 149 * for them 150 */ 151 if (cword < CONST_VAR_F_MIN) 152 return -EINVAL; 153 } 154 155 done: 156 /* 157 * Configure the defined "cword" value to have the variable frequency 158 * generator output a base frequency for the constant frequency 159 * generator to derive from. 160 */ 161 brcmstb_pwm_writel(p, cword >> 8, PWM_CWORD_MSB(channel)); 162 brcmstb_pwm_writel(p, cword & 0xff, PWM_CWORD_LSB(channel)); 163 164 /* Select constant frequency signal output */ 165 value = brcmstb_pwm_readl(p, PWM_CTRL2); 166 value |= CTRL2_OUT_SELECT << (channel * CTRL_CHAN_OFFS); 167 brcmstb_pwm_writel(p, value, PWM_CTRL2); 168 169 /* Configure on and period value */ 170 brcmstb_pwm_writel(p, pc, PWM_PERIOD(channel)); 171 brcmstb_pwm_writel(p, dc, PWM_ON(channel)); 172 173 return 0; 174 } 175 176 static inline void brcmstb_pwm_enable_set(struct brcmstb_pwm *p, 177 unsigned int channel, bool enable) 178 { 179 unsigned int shift = channel * CTRL_CHAN_OFFS; 180 u32 value; 181 182 value = brcmstb_pwm_readl(p, PWM_CTRL); 183 184 if (enable) { 185 value &= ~(CTRL_OEB << shift); 186 value |= (CTRL_START | CTRL_OPENDRAIN) << shift; 187 } else { 188 value &= ~((CTRL_START | CTRL_OPENDRAIN) << shift); 189 value |= CTRL_OEB << shift; 190 } 191 192 brcmstb_pwm_writel(p, value, PWM_CTRL); 193 } 194 195 static int brcmstb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 196 const struct pwm_state *state) 197 { 198 struct brcmstb_pwm *p = to_brcmstb_pwm(chip); 199 int err; 200 201 if (state->polarity != PWM_POLARITY_NORMAL) 202 return -EINVAL; 203 204 if (!state->enabled) { 205 if (pwm->state.enabled) 206 brcmstb_pwm_enable_set(p, pwm->hwpwm, false); 207 208 return 0; 209 } 210 211 err = brcmstb_pwm_config(chip, pwm, state->duty_cycle, state->period); 212 if (err) 213 return err; 214 215 if (!pwm->state.enabled) 216 brcmstb_pwm_enable_set(p, pwm->hwpwm, true); 217 218 return 0; 219 } 220 221 static const struct pwm_ops brcmstb_pwm_ops = { 222 .apply = brcmstb_pwm_apply, 223 .owner = THIS_MODULE, 224 }; 225 226 static const struct of_device_id brcmstb_pwm_of_match[] = { 227 { .compatible = "brcm,bcm7038-pwm", }, 228 { /* sentinel */ } 229 }; 230 MODULE_DEVICE_TABLE(of, brcmstb_pwm_of_match); 231 232 static int brcmstb_pwm_probe(struct platform_device *pdev) 233 { 234 struct brcmstb_pwm *p; 235 int ret; 236 237 p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); 238 if (!p) 239 return -ENOMEM; 240 241 p->clk = devm_clk_get(&pdev->dev, NULL); 242 if (IS_ERR(p->clk)) { 243 dev_err(&pdev->dev, "failed to obtain clock\n"); 244 return PTR_ERR(p->clk); 245 } 246 247 ret = clk_prepare_enable(p->clk); 248 if (ret < 0) { 249 dev_err(&pdev->dev, "failed to enable clock: %d\n", ret); 250 return ret; 251 } 252 253 platform_set_drvdata(pdev, p); 254 255 p->chip.dev = &pdev->dev; 256 p->chip.ops = &brcmstb_pwm_ops; 257 p->chip.npwm = 2; 258 259 p->base = devm_platform_ioremap_resource(pdev, 0); 260 if (IS_ERR(p->base)) { 261 ret = PTR_ERR(p->base); 262 goto out_clk; 263 } 264 265 ret = pwmchip_add(&p->chip); 266 if (ret) { 267 dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); 268 goto out_clk; 269 } 270 271 return 0; 272 273 out_clk: 274 clk_disable_unprepare(p->clk); 275 return ret; 276 } 277 278 static int brcmstb_pwm_remove(struct platform_device *pdev) 279 { 280 struct brcmstb_pwm *p = platform_get_drvdata(pdev); 281 282 pwmchip_remove(&p->chip); 283 clk_disable_unprepare(p->clk); 284 285 return 0; 286 } 287 288 #ifdef CONFIG_PM_SLEEP 289 static int brcmstb_pwm_suspend(struct device *dev) 290 { 291 struct brcmstb_pwm *p = dev_get_drvdata(dev); 292 293 clk_disable(p->clk); 294 295 return 0; 296 } 297 298 static int brcmstb_pwm_resume(struct device *dev) 299 { 300 struct brcmstb_pwm *p = dev_get_drvdata(dev); 301 302 clk_enable(p->clk); 303 304 return 0; 305 } 306 #endif 307 308 static SIMPLE_DEV_PM_OPS(brcmstb_pwm_pm_ops, brcmstb_pwm_suspend, 309 brcmstb_pwm_resume); 310 311 static struct platform_driver brcmstb_pwm_driver = { 312 .probe = brcmstb_pwm_probe, 313 .remove = brcmstb_pwm_remove, 314 .driver = { 315 .name = "pwm-brcmstb", 316 .of_match_table = brcmstb_pwm_of_match, 317 .pm = &brcmstb_pwm_pm_ops, 318 }, 319 }; 320 module_platform_driver(brcmstb_pwm_driver); 321 322 MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>"); 323 MODULE_DESCRIPTION("Broadcom STB PWM driver"); 324 MODULE_ALIAS("platform:pwm-brcmstb"); 325 MODULE_LICENSE("GPL"); 326